summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-03-12x86, UV: Fix target_cpus() in x2apic_uv_x.cJack Steiner
target_cpu() should initially target all cpus, not just cpu 0. Otherwise systems with lots of disks can exhaust the interrupt vectors on cpu 0 if a large number of disks are discovered before the irq balancer is running. Note: UV code only... Signed-off-by: Jack Steiner <steiner@sgi.com> LKML-Reference: <20100311184328.GA21433@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-12mfd: Several MFD drivers should depend on GENERIC_HARDIRQSGeert Uytterhoeven
commit 5fb4d38b19d95a5f980f0a10adba798f5b92128c ("mfd: Move WM831x to generic IRQ") didn't take into account that genirq support depends on GENERIC_HARDIRQS. Additionally, 2.6.34-rc1 added: - commit 2afa62ea76027b00e472ddb672191e6e15425b43 ("mfd: Use genirq in 88pm860x"). - commit 760e4518788df6762700e6bb9dd8692379f11168 ("mfd: Convert WM8350 to genirq"). - commit 1f1cf8f98cf6588365efeaab8e7e7758aaa77f6e ("mfd: Update irq handler in max8925") Make all of them depend on GENERIC_HARDIRQS to avoid compile errors on architectures that don't support genirq yet. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-12mfd: Fix sm501 requested region sizeSamuel Ortiz
We should only request for the MFD used region, not the whole thing. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Tested-by: Paul Mundt <lethal@linux-sh.org> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
2010-03-12ipconfig: Handle devices which take some time to come up.David S. Miller
Some network devices, particularly USB ones, take several seconds to fully init and appear in the device list. If the user turned ipconfig on, they are using it for NFS root or some other early booting purpose. So it makes no sense to just flat out fail immediately if the device isn't found. It also doesn't make sense to just jack up the initial wait to something crazy like 10 seconds. Instead, poll immediately, and then periodically once a second, waiting for a usable device to appear. Fail after 12 seconds. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Christian Pellegrin <chripell@fsfe.org>
2010-03-11RDMA/nes: Clear stall bit before destroying NIC QPChien Tung
Clear the stall bit to drop any incoming packets while destroying NIC QP. This will prevent a chip resource leak. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-03-11RDMA/nes: Set assume_aligned_header bitFaisal Latif
Set assume_aligned_header bit in QP context as requested by hardware group. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-03-11RDMA/cxgb3: Wait at least one schedule cycle during device removalSteve Wise
During a hot-plug LLD removal event or an EEH error event, iw_cxgb3 must ensure that any/all threads that might be in a cxgb3 exported function must return from the function before iw_cxgb3 returns from its event processing. Do this by calling synchronize_net(). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-03-11IB/mad: Ignore iWARP devices on device removalSteve Wise
When an iWARP device is unloaded, the ib_mad module logs errors. It should be ignoring iWARP devices on device removal just like it does on device add. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-03-11IPoIB: Include return code in trace message for ib_post_send() failuresOr Gerlitz
Print the return code of ib_post_send() if it fails to make these debugging messages more useful. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-03-11IPoIB: Fix TX queue lockup with mixed UD/CM trafficEli Cohen
The IPoIB UD QP reports send completions to priv->send_cq, which is usually left unarmed; it only gets armed when the number of outstanding send requests reaches the size of the TX queue. This arming is done only in the send path for the UD QP. However, when sending CM packets, the net queue may be stopped for the same reasons but no measures are taken to recover the UD path from a lockup. Consider this scenario: a host sends high rate of both CM and UD packets, with a TX queue length of N. If at some time the number of outstanding UD packets is more than N/2 and the overall outstanding packets is N-1, and CM sends a packet (making the number of outstanding sends equal N), the TX queue will be stopped. When all the CM packets complete, the number of outstanding packets will still be higher than N/2 so the TX queue will not be restarted. Fix this by calling ib_req_notify_cq() when the queue is stopped in the CM path. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-03-11GFS2: Skip check for mandatory locks when unlockingSachin Prabhu
gfs2_lock() will skip locks on file which have mode set to 02666. This is a problem in cases where the mode of the file is changed after a process has obtained a lock on the file. Such a lock will be skipped and will result in a BUG in locks_remove_flock(). gfs2_lock() should skip the check for mandatory locks when unlocking a file. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-03-11sched: Fix pick_next_highest_task_rt() for cgroupsPeter Zijlstra
Since pick_next_highest_task_rt() already iterates all the cgroups and is really only interested in tasks, skip over the !task entries. Reported-by: Dhaval Giani <dhaval.giani@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Dhaval Giani <dhaval.giani@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11x86: Reduce per cpu warning boot up messagesMike Travis
Reduce warning message output to one line only instead of per cpu. Signed-of-by: Mike Travis <travis@sgi.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: x86@kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11x86: Reduce per cpu MCA boot up messagesMike Travis
Don't write per cpu MCA boot up messages. Signed-of-by: Mike Travis <travis@sgi.com> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: x86@kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11sched: Cleanup: remove unused variable in try_to_wake_up()Dan Carpenter
We haven't used the "orig_rq" variable since 055a00865d "Fix/add missing update_rq_clock() calls" Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: efault@gmx.de LKML-Reference: <20100306111752.GL4958@bicker> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11Merge branch 'tip/tracing/core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/urgent
2010-03-11x86/mce: Fix RCU lockdep splatsPaul E. McKenney
Create an rcu_dereference_check_mce() that checks for RCU-sched read side and mce_read_mutex being held on update side. Replace uses of rcu_dereference() in arch/x86/kernel/cpu/mcheck/mce.c with this new macro. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1267830207-9474-3-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11rcu: Increase RCU CPU stall timeouts if PROVE_RCUPaul E. McKenney
CONFIG_PROVE_RCU imposes additional overhead on the kernel, so increase the RCU CPU stall timeouts in an attempt to allow for this effect. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1267830207-9474-2-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11ftrace: Replace read_barrier_depends() with rcu_dereference_raw()Paul E. McKenney
Replace the calls to read_barrier_depends() in ftrace_list_func() with rcu_dereference_raw() to improve readability. The reason that we use rcu_dereference_raw() here is that removed entries are never freed, instead they are simply leaked. This is one of a very few cases where use of rcu_dereference_raw() is the long-term right answer. And I don't yet know of any others. ;-) Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1267830207-9474-1-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-11GFS2: Allow the number of committed revokes to temporarily be negativeBenjamin Marzinski
GFS2 tracks the number of revokes and unrevokes that are part of committed transactions via sd_log_commited_revoke. It is possible for one process to add revokes during its transaction, while another process unrevokes them during its transaction. If the second process finishes its transaction first, sd_log_commited_revoke will be decremented by the number of unrevokes that the second process did, without first being incremented by the number of revokes the first process did. This is fine, since all started transactions must be completed before the journal can be flushed. However, sd_log_commited_revoke is an unsigned integer, and log_refund() causes an assertion failure if it would go negative at the end of a transaction. This patch makes sd_log_commited_revoke a signed integer and allows it to go negative. __gfs2_log_flush() still checks that it mataches the actual number of revokes. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-03-11Input: wm831x-on - convert to use genirqMark Brown
Now that the WM831x core has been converted to use genirq for the interrupt controller there is no need for the client drivers to use a WM831x-specific API rather than just calling genirq directly. Also fixes a leak of the IRQ during init failure - the error path free_irq() was using NULL rather than the driver data as the data pointer so free_irq() wouldn't have matched. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-11Input: ads7846 - add wakeup supportRanjith Lohithakshan
Add wakeup support to the ads7846 driver. Platforms can enable wakeup capability by setting the wakeup flag in ads7846_platform_data. With this patch the ads7846 driver can be used to wake the system from suspend. Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-11Input: appletouch - fix integer overflow issueVadim Zaliva
When reading data from Geyser 2 touchpads used on post Oct 2005 Apple PowerBooks the driver was casting X and Y coordinates values to 'signed char'. Testing on one of such PowerBooks I have noticed that touchpad always generates positive values, but some of them are greater that 127, and thus, when cast to 'signed char' being interpreted as a negative. Such bigger values have been observed infrequently, closer to the edges of a touchpad, so the problem was not very visible. Nevertheless, the patch would potentially improve touchpad driver accuracy. Signed-off-by: Vadim Zaliva <lord@crocodile.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-10Merge branch 'wireless-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2010-03-10mac80211: Fix memory leak in ieee80211_if_write()Eric Dumazet
Fix memory leak and use kmalloc() instead of kzalloc() as we are going to overwrite the allocated buffer. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10mac80211: Fix (dynamic) power save entryJuuso Oikarinen
Currently hardware with !IEEE80211_HW_PS_NULLFUNC_STACK and IEEE80211_HW_REPORTS_TX_ACK_STATUS will never enter PSM due to the conditions in the power save entry functions. Fix those conditions. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ipw2200: use kmalloc for large local variablesZhu Yi
Fixed below compiler warning: drivers/net/wireless/ipw2x00/ipw2200.c: In function ‘ipw_load_firmware’: drivers/net/wireless/ipw2x00/ipw2200.c:3260: warning: the frame size of 1168 bytes is larger than 1024 bytes Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: read eeprom IQ calibration values correctly for G modeBruno Randolf
we read the IQ correction values (i_cal and q_cal) for G mode from a wrong location (the same shifts as for A mode is applied which is incorrect). use correct locations, matching the docs and HAL sources. also we should write IQ correction only when we have that information in the EEPROM, starting from version 4. also write it in the same way as we do in the periodic recalibration (enable last), just to be sure. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: fix I/Q calibration (for real)Bruno Randolf
I/Q calibration was completely broken, resulting in a high number of CRC errors on received packets. before i could see around 10% to 20% CRC errors, with this patch they are between 0% and 3%. 1.) the removal of the mask in commit "ath5k: Fix I/Q calibration (f1cf2dbd0f798b71b1590e7aca6647f2caef1649)" resulted in no mask beeing used when writing the I/Q values into the register. additional errors in the calculation of the values (see 2.) resulted too high numbers, exceeding the masks, so wrong values like 0xfffffffe were written. to be safe we should always use the bitmask when writing parts of a register. 2.) using a (s32) cast for q_coff is a wrong conversion to signed, since we convert to a signed value later by substracting 128. this resulted in too low numbers for Q many times, which were limited to -16 by the boundary check later on. 3.) checked everything against the HAL sources and took over comments and minor optimizations from there. 4.) we can't use ENABLE_BITS when we want to write a number (the number can contain zeros). also always write the correction values first and set ENABLE bit last, like the HAL does. Signed-off-by: Bruno Randolf <br1@einfach.org> Cc: stable@kernel.org Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: fix TSF resetBruno Randolf
to reset the TSF, AR5K_BEACON_RESET_TSF has to be 1, not 0. also we have a function for that so use it. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10ath5k: use fixed antenna for tx descriptorsBruno Randolf
when using a fixed antenna we should use the antenna number in all tx descriptors, otherwise the hardware will sometimes send the frame out on the other antenna. it seems like the hardware does not always respect the default antenna and diversity settings (esp. AR5K_STA_ID1_DEFAULT_ANTENNA). also i would like to note that antenna diversity does not always work correctly on 5414 (at least) when only one antenna is connected: for example all frames might be received on antenna A but still the HW tries to send on antenna B some times, causing packet loss. this is both verified with the antenna statistics output of the previous patch and a spectrum analyzer. Signed-off-by: Bruno Randolf <br1@einfach.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10libipw: split ieee->networks into small piecesZhu Yi
The ieee->networks consists of 128 struct libipw_network entries. If we allocate this chunk of memory altogether, it ends up with an order 4 page allocation. High order page allocation is likely to fail on system high load. This patch splits the big chunk memory allocation into small pieces, each is 344 bytes, allocates them with 128 times. The patch fixed bug http://bugzilla.kernel.org/show_bug.cgi?id=14989 Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10mac80211: Fix sta_mtx unlocking on insert STA failure pathJouni Malinen
Commit 34e895075e21be3e21e71d6317440d1ee7969ad0 introduced sta_mtx locking into sta_info_insert() (now sta_info_insert_rcu), but forgot to unlock this mutex on one of the error paths. Fix this by adding the missing mutex_unlock() call for the case where STA insert fails due to an entry existing already. This may happen at least in AP mode when a STA roams between two BSSes (vifs). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10rt2x00: remove KSEG1ADDR define from rt2x00soc.hHelmut Schaa
Remove the KSEG1ADDR define from rt2x00soc.h as it redefines and covers the correct one from the arch/mips/include/asm/addrspace.h. Otherwise the driver oopses on the target platform (Ralink rt3050 board). Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10net: add ColdFire support to the smc91x driverGreg Ungerer
Some embedded ColdFire based boards use the SMC 91x family of ethernet devices. (For example the Freescale M5249C3 and MoretonBay NETtel). Add IO access support to the SMC91x driver, and allow this driver to be configured for ColdFire platforms. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10asix: fix setting mac address for AX88772Jussi Kivilinna
Setting new MAC address only worked when device was set to promiscuous mode. Fix MAC address by writing new address to device using undocumented command AX_CMD_READ_NODE_ID+1. Patch is tested with AX88772 device. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David Hollis <dhollis@davehollis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10ipv6 ip6_tunnel: eliminate unused recursion field from ip6_tnl{}.YOSHIFUJI Hideaki / 吉藤英明
Commit a43912ab19... ("tunnel: eliminate recursion field") eliminated use of recursion field from tunnel structures, but its definition still exists in ip6_tnl{}. Let's remove that unused field. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10net: Fix dev_mc_add()Eric Dumazet
Commit 6e17d45a (net: add addr len check to dev_mc_add) added a bug in dev_mc_add(), since it can now exit with a lock imbalance. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10net: Annotates neigh_invalidate()Eric Dumazet
Annotates neigh_invalidate() with __releases() and __acquires() for sparse sake. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10tcp: Fix tcp_v4_rcv()Eric Dumazet
Commit d218d111 (tcp: Generalized TTL Security Mechanism) added a bug for TIMEWAIT sockets. We should not test min_ttl for TW sockets. Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10tg3: Fix tg3_poll_controller() passing wrong pointer to tg3_interrupt()Louis Rilling
Commit 09943a1819a240ff4a72f924d0038818fcdd0a90 Author: Matt Carlson <mcarlson@broadcom.com> Date: Fri Aug 28 14:01:57 2009 +0000 tg3: Convert ISR parameter to tnapi forgot to update tg3_poll_controller(), leading to intermittent crashes with netpoll. Fix this. Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: change checksumming default for HiperSocketsFrank Blaschka
Deactivate inbound checksumming on HiperSocket is a valid but dangerous optimization in case the frame is routed from an OSA network to an HiperSockets network. To go for sure we change the default to software checksumming. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: no recovery after layer mismatch (z/VM NICs)Ursula Braun
Depending on their definition in z/VM, virtual devices for z/VM VSWITCH or GuestLAN must be configured either in layer2 or in layer3 mode. If qeth detects a layer mismatch, device activation fails. Trying to recover from this error cannot help; thus scheduling a recovery should be avoided. In addition, since recovery is forbidden during online setting of a qeth device, existence of its network device is guaranteed for all dev_close() calls in qeth. The corresponding checks can be removed. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: set promisc off after trace disabling failureUrsula Braun
If HiperSockets Network Traffic Analyzer is switched off, but trace disabling fails somehow, the qeth driver does not switch off its promisc mode status. A following sniffer reactivation fails, since qeth does not see a need to reenable tracing. At the same time the code analyzing results of trace commands is restructured. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: l3 send dhcp in non pass thru modeFrank Blaschka
dhcp frames are valid IPv4 packets so there is no need to send them in pass thru mode. This allows dhcp packets to pass HiperSockets. Also the dhcp release frame is send out correctly with this patch. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: enable kmsg hash processing in qeth_core_sys.cUrsula Braun
provide qeth kmsg definitions to enable hash string generation for kernel message created with dev_err(). Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10perf: Provide generic perf_sample_data initializationPeter Zijlstra
This makes it easier to extend perf_sample_data and fixes a bug on arm and sparc, which failed to set ->raw to NULL, which can cause crashes when combined with PERF_SAMPLE_RAW. It also optimizes PowerPC and tracepoint, because the struct initialization is forced to zero out the whole structure. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Jean Pihet <jpihet@mvista.com> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: Jamie Iles <jamie.iles@picochip.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: stable@kernel.org LKML-Reference: <20100304140100.315416040@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10Merge branch 'topic/misc' into for-linusTakashi Iwai
2010-03-10Merge branch 'topic/hda' into for-linusTakashi Iwai
2010-03-09Input: ad7877 - increase pen up imeoutMichael Hennerich
The time interval between consecutive interrupts depends on a number of tunables: first_conversion_delay, acquisition_time, averaging and foremost the pen_down_acc_interval. Since the mod_timer() action for the PEN UP event happens in the spi_async() callback function, latencies incurred by the spi bus drivers also need to be taken into account. So all in all, give the PEN UP event a bit more wiggle room and increase timeout to 100ms. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit (git 2.34.1) at 2025-09-13 23:43:59 +0000