summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-02drm/i915: Remove unnecessary check for unsupported modifiers for NV12Dhinakaran Pandiyan
There is already a check to allow only RGB8888 formats with CCS modifiers. Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180628061854.6430-1-dhinakaran.pandiyan@intel.com
2018-07-02drm/i915/psr: Add psr1 live statusVathsala Nagaraju
Prints live state of psr1.Extending the existing PSR2 live state function to cover psr1. Tested on KBL with psr2 and psr1 panel. v2: rebase v3: DK Rename psr2_live_status to psr_source_status. v4: DK Move EDP_PSR_STATUS_STATE_SHIFT below EDP_PSR_STATUS_STATE_MASK. Pass seq to psr_source_status, handle source status prints in psr_source_status. v5: Fixed CI warning messages v6: Remove extra space in the title before the colon.(DK) Rebase. (Jani) v7: Use tabs for indenting the values.(Jani) v8: Addressed dk's review comments. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530086910-15914-1-git-send-email-vathsala.nagaraju@intel.com
2018-07-02drm/i915: Try GGTT mmapping whole object as partialChris Wilson
If the whole object is already pinned by HW for use as scanout, we will fail to move it to the mappable region and so must resort to using a partial VMA covering the whole object. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104513 Fixes: aa136d9d72c2 ("drm/i915: Convert partial ggtt vma to full ggtt if it spans the entire object") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180630090509.469-1-chris@chris-wilson.co.uk
2018-07-02drm: Use kvzalloc for allocating blob property memoryMichel Dänzer
The property size may be controlled by userspace, can be large (I've seen failure with order 4, i.e. 16 pages / 64 KB) and doesn't need to be physically contiguous. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180629142710.2069-1-michel@daenzer.net Cc: stable@vger.kernel.org
2018-07-02ata: Fix ZBC_OUT all bit handlingDamien Le Moal
If the ALL bit is set in the ZBC_OUT command, the command zone ID field (block) should be ignored. Reported-by: David Butterfield <david.butterfield@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2018-07-02ata: Fix ZBC_OUT command block checkDamien Le Moal
The block (LBA) specified must not exceed the last addressable LBA, which is dev->nr_sectors - 1. So fix the correct check is "if (block >= dev->n_sectors)" and not "if (block > dev->n_sectords)". Additionally, the asc/ascq to return for an LBA that is not a zone start LBA should be ILLEGAL REQUEST, regardless if the bad LBA is out of range. Reported-by: David Butterfield <david.butterfield@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
2018-07-02ahci: Add Intel Ice Lake LP PCI IDMika Westerberg
This should also be using the default LPM policy for mobile chipsets so add the PCI ID to the driver list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2018-07-02drm/vmwgfx: Use drm_plane_mask() & co.Ville Syrjälä
Use drm_{plane,connector}_mask() where appropriate. Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-10-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-07-02drm/vc4: Use drm_crtc_mask()Ville Syrjälä
Use drm_crtc_mask() where appropriate. Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-9-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2018-07-02drm/sun4i: Use drm_crtc_mask()Ville Syrjälä
Use drm_crtc_mask() where appropriate. Cc: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-8-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-07-02drm/imx: Use drm_plane_mask()Ville Syrjälä
Use drm_plane_mask() where appropriate. Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-6-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-02drm/i915: Use drm_plane_mask() & co.Ville Syrjälä
Use drm_{plane,crtc,encoder,connector}_mask() where appropriate. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-5-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-07-02drm: Add drm_connector_mask()Ville Syrjälä
Add drm_connector_mask() which returns the 1<<index for the connector. We already have an identical drm_crtc_mask() for crtcs. Mostly performed with coccinelle: @@ @@ - (1<<drm_connector_index( + drm_connector_mask( ...) - ) @@ @@ - 1<<drm_connector_index( + drm_connector_mask( ...) @@ @@ - BIT(drm_connector_index( + drm_connector_mask( ...) - ) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-4-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-07-02drm: Add drm_encoder_mask()Ville Syrjälä
Add drm_encoder_mask() which returns the 1<<index for the encoder. We already have an identical drm_crtc_mask() for crtcs. Mostly performed with coccinelle: @@ @@ - (1<<drm_encoder_index( + drm_encoder_mask( ...) - ) @@ @@ - 1<<drm_encoder_index( + drm_encoder_mask( ...) @@ @@ - BIT(drm_encoder_index( + drm_encoder_mask( ...) - ) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-3-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-07-02drm: Use drm_crtc_mask()Ville Syrjälä
Use drm_crtc_mask() where appropriate. Mostly performed with coccinelle: @@ @@ - (1<<drm_crtc_index( + drm_crtc_mask( ...) - ) @@ @@ - 1<<drm_crtc_index( + drm_crtc_mask( ...) @@ @@ - BIT(drm_crtc_index( + drm_crtc_mask( ...) - ) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-2-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-07-02drm: Add drm_plane_mask()Ville Syrjälä
Add drm_plane_mask() which returns the 1<<index for the plane. We already have an identical drm_crtc_mask() for crtcs. Mostly performed with coccinelle: @@ @@ - (1<<drm_plane_index( + drm_plane_mask( ...) - ) @@ @@ - 1<<drm_plane_index( + drm_plane_mask( ...) @@ @@ - BIT(drm_plane_index( + drm_plane_mask( ...) - ) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-07-02drm/atomic-helper: Use old/new state in ↵Ville Syrjälä
drm_atomic_helper_commit_planes_on_crtc() Update drm_atomic_helper_commit_planes_on_crtc() to use explicit old/new states instead of relying on obj->state. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180626204144.14769-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-07-02i2c-cht-wc: Fix bq24190 supplierHans de Goede
Commit f2a8aa053c17 ("typec: tcpm: Represent source supply through power_supply") moved the code to register a power_supply representing the device supplying power to the type-C connector, from the fusb302 code to the generic tcpm code. This has caused the power-supply registered by the fusb302 driver, which determines how much current the bq24190 can draw, to change name from "fusb302-typec-source" to "tcpm-source-psy-i2c-fusb302". Fixes: f2a8aa053c17 ("typec: tcpm: Represent source supply through...") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-02typec: tcpm: Correctly report power_supply current and voltage for non pd supplyHans de Goede
Commit f2a8aa053c17 ("typec: tcpm: Represent source supply through power_supply") moved the code to register a power_supply representing the device supplying power to the type-C connector, from the fusb302 code to the generic tcpm code so that we have a psy reporting the supply voltage and current for all tcpm devices. This broke the reporting of current and voltage through the psy interface when supplied by a a non pd supply (5V, current as reported by get_current_limit). The cause of this breakage is port->supply_voltage and port->current_limit not being set in that case. This commit fixes this by setting port->supply_voltage and port->current_limit from tcpm_set_current_limit(). This commit also removes setting supply_voltage and current_limit from tcpm_reset_port() as that calls tcpm_set_current_limit(0, 0) which now already sets these to 0. Fixes: f2a8aa053c17 ("typec: tcpm: Represent source supply through...") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-02usb: xhci: dbc: Don't decrement runtime PM counter if DBC is not startedKai-Heng Feng
pm_runtime_put_sync() gets called everytime in xhci_dbc_stop(). If dbc is not started, this makes the runtime PM counter incorrectly becomes 0, and calls autosuspend function. Then we'll keep seeing this: [54664.762220] xhci_hcd 0000:00:14.0: Root hub is not suspended So only calls pm_runtime_put_sync() when dbc was started. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-02ahci: Disable LPM on Lenovo 50 series laptops with a too old BIOSHans de Goede
There have been several reports of LPM related hard freezes about once a day on multiple Lenovo 50 series models. Strange enough these reports where not disk model specific as LPM issues usually are and some users with the exact same disk + laptop where seeing them while other users where not seeing these issues. It turns out that enabling LPM triggers a firmware bug somewhere, which has been fixed in later BIOS versions. This commit adds a new ahci_broken_lpm() function and a new ATA_FLAG_NO_LPM for dealing with this. The ahci_broken_lpm() function contains DMI match info for the 4 models which are known to be affected by this and the DMI BIOS date field for known good BIOS versions. If the BIOS date is older then the one in the table LPM will be disabled and a warning will be printed. Note the BIOS dates are for known good versions, some older versions may work too, but we don't know for sure, the table is using dates from BIOS versions for which users have confirmed that upgrading to that version makes the problem go away. Unfortunately I've been unable to get hold of the reporter who reported that BIOS version 2.35 fixed the problems on the W541 for him. I've been able to verify the DMI_SYS_VENDOR and DMI_PRODUCT_VERSION from an older dmidecode, but I don't know the exact BIOS date as reported in the DMI. Lenovo keeps a changelog with dates in their release notes, but the dates there are the release dates not the build dates which are in DMI. So I've chosen to set the date to which we compare to one day past the release date of the 2.34 BIOS. I plan to fix this with a follow up commit once I've the necessary info. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-07-02sata_nv: remove redundant pointers sdev0 and sdev1Colin Ian King
Pointers sdev0 and sdev1 are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'sdev0' set but not used [-Wunused-but-set-variable] warning: variable 'sdev1' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-07-02drm/i915: abstract and document register picking macrosJani Nikula
Try to describe what the pick variants do, and which to prefer. No functional changes. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180629102039.2435-1-jani.nikula@intel.com
2018-07-02drbd: fix access after freeLars Ellenberg
We have struct drbd_requests { ... struct bio *private_bio; ... } to hold a bio clone for local submission. On local IO completion, we put that bio, and in case we want to use the result later, we overload that member to hold the ERR_PTR() of the completion result, Which, before v4.3, used to be the passed in "int error", so we could first bio_put(), then assign. v4.3-rc1~100^2~21 4246a0b63bd8 block: add a bi_error field to struct bio changed that: bio_put(req->private_bio); - req->private_bio = ERR_PTR(error); + req->private_bio = ERR_PTR(bio->bi_error); Which introduces an access after free, because it was non obvious that req->private_bio == bio. Impact of that was mostly unnoticable, because we only use that value in a multiple-failure case, and even then map any "unexpected" error code to EIO, so worst case we could potentially mask a more specific error with EIO in a multiple failure case. Unless the pointed to memory region was unmapped, as is the case with CONFIG_DEBUG_PAGEALLOC, in which case this results in BUG: unable to handle kernel paging request v4.13-rc1~70^2~75 4e4cbee93d56 block: switch bios to blk_status_t changes it further to bio_put(req->private_bio); req->private_bio = ERR_PTR(blk_status_to_errno(bio->bi_status)); And blk_status_to_errno() now contains a WARN_ON_ONCE() for unexpected values, which catches this "sometimes", if the memory has been reused quickly enough for other things. Should also go into stable since 4.3, with the trivial change around 4.13. Cc: stable@vger.kernel.org Fixes: 4246a0b63bd8 block: add a bi_error field to struct bio Reported-by: Sarah Newman <srn@prgmr.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-02ALSA: hda - Handle pm failure during hotplugChris Wilson
Obtaining the runtime pm wakeref can fail, especially in a hotplug scenario where i915.ko has been unloaded. If we do not catch the failure, we end up with an unbalanced pm. v2 additions by tiwai: hdmi_present_sense() checks the return value and handle only a negative error case and bails out only if it's really still suspended. Also, snd_hda_power_down() is called at the error path so that the refcount is balanced. Along with it, the spec->pcm_lock is taken outside hdmi_present_sense() in the caller side, so that it won't cause deadlock at reentrace via runtime resume. v3 fix by tiwai: Missing linux/pm_runtime.h is included. References: 222bde03881c ("ALSA: hda - Fix mutex deadlock at HDMI/DP hotplug") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-02mmc: renesas_sdhi_internal_dmac: Cannot clear the RX_IN_USE in abortYoshihiro Shimoda
This patch is fixes an issue that the SDHI_INTERNAL_DMAC_RX_IN_USE flag cannot be cleared because tmio_mmc_core sets the host->data to NULL before the tmio_mmc_core calls tmio_mmc_abort_dma(). So, this patch clears the SDHI_INTERNAL_DMAC_RX_IN_USE in the renesas_sdhi_internal_dmac_abort_dma() anyway. This doesn't cause any side effects. Fixes: 0cbc94daa554 ("mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCs") Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-07-02mmc: renesas_sdhi_internal_dmac: Fix missing unmap in error patchYoshihiro Shimoda
This patch fixes an issue that lacks the dma_unmap_sg() calling in the error patch of renesas_sdhi_internal_dmac_start_dma(). Fixes: 0cbc94daa554 ("mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCs") Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-07-02Merge branch 'qed-fixes'David S. Miller
Sudarsana Reddy Kalluru says: ==================== qed*: Fix series. The patch series addresses few issues in the qed* drivers. Please consider applying it to 'net' branch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02qede: Adverstise software timestamp caps when PHC is not available.Sudarsana Reddy Kalluru
When ptp clock is not available for a PF (e.g., higher PFs in NPAR mode), get-tsinfo() callback should return the software timestamp capabilities instead of returning the error. Fixes: 4c55215c ("qede: Add driver support for PTP") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02qed: Fix use of incorrect size in memcpy call.Sudarsana Reddy Kalluru
Use the correct size value while copying chassis/port id values. Fixes: 6ad8c632e ("qed: Add support for query/config dcbx.") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02qed: Fix setting of incorrect eswitch mode.Sudarsana Reddy Kalluru
By default, driver sets the eswitch mode incorrectly as VEB (virtual Ethernet bridging). Need to set VEB eswitch mode only when sriov is enabled, and it should be to set NONE by default. The patch incorporates this change. Fixes: 0fefbfbaa ("qed*: Management firmware - notifications and defaults") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02qed: Limit msix vectors in kdump kernel to the minimum required count.Sudarsana Reddy Kalluru
Memory size is limited in the kdump kernel environment. Allocation of more msix-vectors (or queues) consumes few tens of MBs of memory, which might lead to the kdump kernel failure. This patch adds changes to limit the number of MSI-X vectors in kdump kernel to minimum required value (i.e., 2 per engine). Fixes: fe56b9e6a ("qed: Add module with basic common support") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02ipvlan: call dev_change_flags when ipvlan mode is resetHangbin Liu
After we change the ipvlan mode from l3 to l2, or vice versa, we only reset IFF_NOARP flag, but don't flush the ARP table cache, which will cause eth->h_dest to be equal to eth->h_source in ipvlan_xmit_mode_l2(). Then the message will not come out of host. Here is the reproducer on local host: ip link set eth1 up ip addr add 192.168.1.1/24 dev eth1 ip link add link eth1 ipvlan1 type ipvlan mode l3 ip netns add net1 ip link set ipvlan1 netns net1 ip netns exec net1 ip link set ipvlan1 up ip netns exec net1 ip addr add 192.168.2.1/24 dev ipvlan1 ip route add 192.168.2.0/24 via 192.168.1.2 ping 192.168.2.2 -c 2 ip netns exec net1 ip link set ipvlan1 type ipvlan mode l2 ping 192.168.2.2 -c 2 Add the same configuration on remote host. After we set the mode to l2, we could find that the src/dst MAC addresses are the same on eth1: 21:26:06.648565 00:b7:13:ad:d3:05 > 00:b7:13:ad:d3:05, ethertype IPv4 (0x0800), length 98: (tos 0x0, ttl 64, id 58356, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.2.1 > 192.168.2.2: ICMP echo request, id 22686, seq 1, length 64 Fix this by calling dev_change_flags(), which will call netdevice notifier with flag change info. v2: a) As pointed out by Wang Cong, check return value for dev_change_flags() when change dev flags. b) As suggested by Stefano and Sabrina, move flags setting before l3mdev_ops. So we don't need to redo ipvlan_{, un}register_nf_hook() again in err path. Reported-by: Jianlin Shi <jishi@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Fixes: 2ad7bf3638411 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02ipv6: sr: fix passing wrong flags to crypto_alloc_shash()Eric Biggers
The 'mask' argument to crypto_alloc_shash() uses the CRYPTO_ALG_* flags, not 'gfp_t'. So don't pass GFP_KERNEL to it. Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02net: fix use-after-free in GRO with ESPSabrina Dubroca
Since the addition of GRO for ESP, gro_receive can consume the skb and return -EINPROGRESS. In that case, the lower layer GRO handler cannot touch the skb anymore. Commit 5f114163f2f5 ("net: Add a skb_gro_flush_final helper.") converted some of the gro_receive handlers that can lead to ESP's gro_receive so that they wouldn't access the skb when -EINPROGRESS is returned, but missed other spots, mainly in tunneling protocols. This patch finishes the conversion to using skb_gro_flush_final(), and adds a new helper, skb_gro_flush_final_remcsum(), used in VXLAN and GUE. Fixes: 5f114163f2f5 ("net: Add a skb_gro_flush_final helper.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02bus: ti-sysc: Use 2-factor allocator argumentsKees Cook
This adjusts the allocator calls to use 2-factor argument call style, as done treewide already for improved defense against allocation overflows. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-02ARM: dts: dra7: Disable metastability workaround for USB2Roger Quadros
Disable the metastability workaround for USB2. The original patch disabled the workaround on the wrong USB port. Fixes: b8c9c6fa2002 ("ARM: dts: dra7: Disable USB metastability workaround for USB2") Cc: <stable@vger.kernel.org> [4.16+] Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-07-02s390/mm: fix refcount usage for 4K pgsteEric Farman
s390 no longer uses the _mapcount field in struct page to identify the page table format being used. While the code was diligent in handling the different mappings, it neglected to turn "off" the map bits when alloc_pgste was being used. This resulted in bits remaining "on" in the _refcount field, and thus an artifically huge "in use" count that prevents the pages from actually being released by __free_page. There's opportunity for improvement in the "1 vs 3" vs "1U vs 3U" vs "0x1 vs 0x11" etc. variations for all these calls, I am just keeping things simple compared to neighboring code. Fixes: 620b4e903179 ("s390: use _refcount for pgtables") Reported-by: Halil Pasic <pasic@linux.ibm.com> Bisected-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-02s390/dasd: reduce the default queue depth and nr of hardware queuesStefan Haberland
Reduce the default values for the number of hardware queues and queue depth to significantly reduce the memory footprint of a DASD device. The memory consumption per DASD device reduces from approximately 40MB to approximately 1.5MB. This is necessary to build systems with a large number of DASD devices and a reasonable amount of memory. Performance measurements showed that good performance results are possible with the new default values even on systems with lots of CPUs and lots of alias devices. Fixes: e443343e509a ("s390/dasd: blk-mq conversion") Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-02staging: rtl8723bs: Prevent an underflow in rtw_check_beacon_data().Murray McAllister
Dan Carpenter reported an integer underflow issue in the rtl8188eu driver. This is also needed for the length (signed integer) in rtl8723bs, as it is later converted to an unsigned integer and used in a memcpy operation. Original issue is at https://patchwork.kernel.org/patch/9796371/ Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Murray McAllister <murray.mcallister@insomniasec.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-02dma-fence: Allow wait_any_timeout for all fencesDaniel Vetter
When this was introduced in commit a519435a96597d8cd96123246fea4ae5a6c90b02 Author: Christian König <christian.koenig@amd.com> Date: Tue Oct 20 16:34:16 2015 +0200 dma-buf/fence: add fence_wait_any_timeout function v2 there was a restriction added that this only works if the dma-fence uses the dma_fence_default_wait hook. Which works for amdgpu, which is the only caller. Well, until you share some buffers with e.g. i915, then you get an -EINVAL. But there's really no reason for this, because all drivers must support callbacks. The special ->wait hook is only as an optimization; if the driver needs to create a worker thread for an active callback, then it can avoid to do that if it knows that there's a process context available already. So ->wait is just an optimization, just using the logic in dma_fence_default_wait() should work for all drivers. Let's remove this restriction. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180503142603.28513-4-daniel.vetter@ffwll.ch
2018-07-02dma-fence: Make ->enable_signaling optionalDaniel Vetter
Many drivers have a trivial implementation for ->enable_signaling. Let's make it optional by assuming that signalling is already available when the callback isn't present. v2: Don't do the trick to set the ENABLE_SIGNAL_BIT unconditionally, it results in an expensive spinlock take for everyone. Instead just check if the callback is present. Suggested by Maarten. Also move misplaced kerneldoc hunk to the right patch. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> (v1) Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20180504141034.27727-1-daniel.vetter@ffwll.ch
2018-07-02dma-fence: remove fill_driver_data callbackDaniel Vetter
Noticed while I was typing docs. Entirely unused. v2: Remove reference in @timeline_value_str too. While at it clarify why timeline_value_str has a fence parameter - we don't have an explicit timeline structure unfortunately. Cc: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Christian König <christian.koenig@amd.com> (v1) Cc: Christian König <christian.koenig@amd.com> (v1) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180503142603.28513-2-daniel.vetter@ffwll.ch
2018-07-02objtool: Support GCC 8 '-fnoreorder-functions'Josh Poimboeuf
Since the following commit: cd77849a69cf ("objtool: Fix GCC 8 cold subfunction detection for aliased functions") ... if the kernel is built with EXTRA_CFLAGS='-fno-reorder-functions', objtool can get stuck in an infinite loop. That flag causes the new GCC 8 cold subfunctions to be placed in .text instead of .text.unlikely. But it also has an unfortunate quirk: in the symbol table, the subfunction (e.g., nmi_panic.cold.7) is nested inside the parent (nmi_panic). That function overlap confuses objtool, and causes it to get into an infinite loop in next_insn_same_func(). Here's Allan's description of the loop: "Objtool iterates through the instructions in nmi_panic using next_insn_same_func. Once it reaches the end of nmi_panic at 0x534 it jumps to 0x528 as that's the start of nmi_panic.cold.7. However, since the instructions starting at 0x528 are still associated with nmi_panic objtool will get stuck in a loop, continually jumping back to 0x528 after reaching 0x534." Fix it by shortening the length of the parent function so that the functions no longer overlap. Reported-and-analyzed-by: Allan Xavier <allan.x.xavier@oracle.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Allan Xavier <allan.x.xavier@oracle.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/9e704c52bee651129b036be14feda317ae5606ae.1530136978.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-02drm/i915/gvt: changed DDI mode emulation typeXiaolin Zhang
changed gvt display transcode DDI mode from DP_SST to DVI to address below calltrace issue during guest booting up which is caused by zero dotclock initial value with DP_SST mode. transcode DVI mode emulation also align with native with DP connection. [drm:drm_calc_timestamping_constants] ERROR crtc 41: Can't calculate constants, dotclock = 0! WARNING: at drivers/gpu/drm/drm_vblank.c:620 drm_calc_vbltimestamp_from_scanoutpos Call Trace: ? drm_calc_timestamping_constants+0x144/0x150 [drm] drm_get_last_vbltimestamp+0x54/0x90 [drm] drm_reset_vblank_timestamp+0x59/0xd0 [drm] drm_crtc_vblank_on+0x7b/0xd0 [drm] intel_modeset_setup_hw_state+0xb67/0xfd0 [i915] ? gen2_read32+0x110/0x110 [i915] ? drm_modeset_lock+0x30/0xa0 [drm] intel_modeset_init+0x794/0x19d0 [i915] ? intel_setup_gmbus+0x232/0x2e0 [i915] i915_driver_load+0xb4a/0xf40 [i915] Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-07-02drm/i915/gvt: fix a bug of partially write ggtt entiesZhao Yan
when guest writes ggtt entries, it could write 8 bytes a time if gtt_entry_size is 8. But, qemu could split the 8 bytes into 2 consecutive 4-byte writes. If each 4-byte partial write could trigger a host ggtt write, it is very possible that a wrong combination is written to the host ggtt. E.g. the higher 4 bytes is the old value, but the lower 4 bytes is the new value, and this 8-byte combination is wrong but written to the ggtt, thus causing bugs. To handle this condition, we just record the first 4-byte write, then wait until the second 4-byte write comes and write the combined 64-bit data to host ggtt table. To save memory space and to spot partial write as early as possible, we don't keep this information for every ggtt index. Instread, we just record the last ggtt write position, and assume the two 4-byte writes come in consecutively for each vgpu. This assumption is right based on the characteristic of ggtt entry which stores memory address. When gtt_entry_size is 8, the guest memory physical address should be 64 bits, so any sane guest driver should write 8-byte long data at a time, so 2 consecutive 4-byte writes at the same ggtt index should be trapped in gvt. v2: when incomplete ggtt entry write is located, e.g. 1. guest only writes 4 bytes at a ggtt offset and no long writes the rest 4 bytes. 2. guest writes 4 bytes of a ggtt offset, then write at other ggtt offsets, then return back to write the left 4 bytes of the first ggtt offset. add error handling logic to remap host entry to scratch page, and mark guest virtual ggtt entry as not present. (zhenyu wang) Signed-off-by: Zhao Yan <yan.y.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-07-02drm/exynos: Replace drm_dev_unref with drm_dev_putThomas Zimmermann
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-07-02drm/exynos: Replace drm_gem_object_unreference_unlocked with put functionThomas Zimmermann
This patch unifies the naming of DRM functions for reference counting of struct drm_gem_object. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-07-02drm/exynos: Replace drm_framebuffer_{un/reference} with put,get functionsThomas Zimmermann
This patch unifies the naming of DRM functions for reference counting of struct drm_framebuffer. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-07-02m68k: fix "bad page state" oops on ColdFire bootGreg Ungerer
Booting a ColdFire m68k core with MMU enabled causes a "bad page state" oops since commit 1d40a5ea01d5 ("mm: mark pages in use for page tables"): BUG: Bad page state in process sh pfn:01ce2 page:004fefc8 count:0 mapcount:-1024 mapping:00000000 index:0x0 flags: 0x0() raw: 00000000 00000000 00000000 fffffbff 00000000 00000100 00000200 00000000 raw: 039c4000 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 22 Comm: sh Not tainted 4.17.0-07461-g1d40a5ea01d5 #13 Fix by calling pgtable_page_dtor() in our __pte_free_tlb() code path, so that the PG_table flag is cleared before we free the pte page. Note that I had to change the type of pte_free() to be static from extern. Otherwise you get a lot of warnings like this: ./arch/m68k/include/asm/mcf_pgalloc.h:80:2: warning: ‘pgtable_page_dtor’ is static but used in inline function ‘pte_free’ which is not static pgtable_page_dtor(page); ^ And making it static is consistent with our use of this in the other m68k pgalloc definitions of pte_free(). Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> CC: Matthew Wilcox <willy@infradead.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
generated by cgit (git 2.34.1) at 2025-09-21 06:21:45 +0000