summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-26nvme: release ida resourcesMax Gurtovoy
ida instances allocate some internal memory in addition to the base 'struct ida'. Use ida_destroy() to release that memory at module_exit(). Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-26nvme: Add compat_ioctl handler for NVME_IOCTL_SUBMIT_IOmasahiro31.yamada@kioxia.com
Currently 32 bit application gets ENOTTY when it calls compat_ioctl with NVME_IOCTL_SUBMIT_IO in 64 bit kernel. The cause is that the results of sizeof(struct nvme_user_io), which is used to define NVME_IOCTL_SUBMIT_IO, are not same between 32 bit compiler and 64 bit compiler. * 32 bit: the result of sizeof nvme_user_io is 44. * 64 bit: the result of sizeof nvme_user_io is 48. 64 bit compiler seems to add 32 bit padding for multiple of 8 bytes. This patch adds a compat_ioctl handler. The handler replaces NVME_IOCTL_SUBMIT_IO32 with NVME_IOCTL_SUBMIT_IO in case 32 bit application calls compat_ioctl for submit in 64 bit kernel. Then, it calls nvme_ioctl as usual. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Masahiro Yamada (KIOXIA) <masahiro31.yamada@kioxia.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-26nvmet-tcp: optimize tcp stack TX when data digest is usedSagi Grimberg
If we have a 4-byte data digest to send to the wire, but we have more data to send, set MSG_MORE to tell the stack that more is coming. Reviewed-by: Mark Wunderlich <mark.wunderlich@intel.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-26nvme-fabrics: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-26nvme-multipath: do not reset on unknown statusJohn Meneghini
The nvme multipath error handling defaults to controller reset if the error is unknown. There are, however, no existing nvme status codes that indicate a reset should be used, and resetting causes unnecessary disruption to the rest of IO. Change nvme's error handling to first check if failover should happen. If not, let the normal error handling take over rather than reset the controller. Based-on-a-patch-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: John Meneghini <johnm@netapp.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-26nvmet-rdma: allocate RW ctxs according to mdtsMax Gurtovoy
Current nvmet-rdma code allocates MR pool budget based on queue size, assuming both host and target use the same "max_pages_per_mr" count. After limiting the mdts value for RDMA controllers, we know the factor of maximum MR's per IO operation. Thus, make sure MR pool will be sufficient for the required IO depth and IO size. That is, say host's SQ size is 100, then the MR pool budget allocated currently at target will also be 100 MRs. But 100 IO WRITE Requests with 256 sg_count(IO size above 1MB) require 200 MRs when target's "max_pages_per_mr" is 128. Reported-by: Krishnamraju Eraparaju <krishna2@chelsio.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
2020-03-26nvmet-rdma: Implement get_mdts controller opMax Gurtovoy
Set the maximal data transfer size to be 1MB (currently mdts is unlimited). This will allow calculating the amount of MR's that one ctrl should allocate to fulfill it's capabilities. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
2020-03-26nvmet: Add get_mdts op for controllersMax Gurtovoy
Some transports, such as RDMA, would like to set the Maximum Data Transfer Size (MDTS) according to device/port/ctrl characteristics. This will enable the transport to set the optimal MDTS according to controller needs and device capabilities. Add a new nvmet transport op that is called during ctrl identification. This will not effect transports that don't implement this option. The return value of the new op is according to the NVMe spec definition for MDTS. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com>
2020-03-26nvme-pci: properly print controller addressMax Gurtovoy
Align PCI address print with fabrics address that is printed with newline character. Before: [root@server40 linux]# cat /sys/class/nvme/nvme2/address 0000:0b:00.0[root@server40 linux]# After: [root@server40 linux]# cat /sys/class/nvme/nvme2/address 0000:0b:00.0 [root@server40 linux]# Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
2020-03-26nvme-tcp: break from io_work loop if recv failedSagi Grimberg
If we failed to receive data from the socket, don't try to further process it, we will for sure be handling a queue error at this point. While no issue was seen with the current behavior thus far, its safer to cease socket processing if we detected an error. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-26nvme-tcp: move send failure to nvme_tcp_try_sendSagi Grimberg
Consolidate the request failure handling code to where it is being fetched (nvme_tcp_try_send). Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-26nvmet-tcp: fix maxh2cdata icresp parameterSagi Grimberg
MAXH2CDATA is not zero based. Also no reason to limit ourselves to 1M transfers as we can do more easily. Make this an arbitrary limit of 16M. Reported-by: Wenhua Liu <liuw@vmware.com> Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-26nvme-tcp: optimize queue io_cpu assignment for multiple queue mapsSagi Grimberg
Currently, queue io_cpu assignment is done sequentially for default, read and poll queues based on queue id. This causes miss-alignment between context of CPU initiating I/O and the I/O worker thread processing queued requests or completions. Change to modify queue io_cpu assignment to take into account queue maps offset. Each queue io_cpu will start at zero for each queue map. This essentially aligns read/poll queues to start over the same range as default queues. Testing performed by Mark with: - ram device (nvmet) - single CPU core (pinned) - 100% 4k reads - engine io_uring (not using sq_thread option) - hipri flag set Micro-benchmark results show a net gain of: - increase of 18%-29% in IOPs - reduction of 16%-22% in average latency - reduction of 7%-23% in 99.99% latency Baseline: ======== QDepth/Batch | IOPs [k] | Avg. Lat [us] | 99.99% Lat [us] ----------------------------------------------------------------- 1/1 | 32.4 | 30.11 | 50.94 32/8 | 179 | 168.20 | 371 CPU alignment: ============= QDepth/Batch | IOPs [k] | Avg. Lat [us] | 99.99% Lat [us] ----------------------------------------------------------------- 1/1 | 38.5 | 25.18 | 39.16 32/8 | 231 | 130.75 | 343 Reported-by: Mark Wunderlich <mark.wunderlich@intel.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-26nvme-pci: Simplify nvme_poll_irqdisableKeith Busch
The timeout handler can use the existing nvme_poll() if it needs to check a polled queue, allowing nvme_poll_irqdisable() to handle only irq driven queues for the remaining callers. Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-26nvme-pci: Remove two-pass completionsKeith Busch
Completion handling had been done in two steps: find all new completions under a lock, then handle those completions outside the lock. This was done to make the locked section as short as possible so that other threads using the same lock wait less time. The driver no longer shares locks during completion, and is in fact lockless for interrupt driven queues, so the optimization no longer serves its original purpose. Replace the two-pass completion queue handler with a single pass that completes entries immediately. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-26nvme-pci: Remove tag from process cqKeith Busch
The only user for tagged completion was for timeout handling. That user, though, really only cares if the timed out command is completed, which we can safely check within the timeout handler. Remove the tag check to simplify completion handling. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-26nvme-pci: slimmer CQ head updateAlexey Dobriyan
Update CQ head with pre-increment operator. This saves subtraction of 1 and a few registers. Also update phase with "^= 1". This generates only one RMW instruction. ffffffff815ba150 <nvme_update_cq_head>: ffffffff815ba150: 0f b7 47 70 movzx eax,WORD PTR [rdi+0x70] ffffffff815ba154: 83 c0 01 add eax,0x1 ffffffff815ba157: 66 89 47 70 mov WORD PTR [rdi+0x70],ax ffffffff815ba15b: 66 3b 47 68 cmp ax,WORD PTR [rdi+0x68] ffffffff815ba15f: 74 01 je ffffffff815ba162 <nvme_update_cq_head+0x12> ffffffff815ba161: c3 ret ffffffff815ba162: 31 c0 xor eax,eax ffffffff815ba164: 80 77 74 01 ===> xor BYTE PTR [rdi+0x74],0x1 ffffffff815ba168: 66 89 47 70 mov WORD PTR [rdi+0x70],ax ffffffff815ba16c: c3 ret add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-119 (-119) Function old new delta nvme_poll 690 678 -12 nvme_dev_disable 1230 1177 -53 nvme_irq 613 559 -54 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2020-03-26nvmet: check ncqr & nsqr for set-features cmdAmit Engel
For set feature command when setting up NVME_FEAT_NUM_QUEUES, check Number of I/O Completion Queues Requested (NCQR) and Number of I/O Submission Queues Requested (NSQR) before we proceed, for invalid values (i.e. 65535) return an appropriate NVMe invalid field status. Signed-off-by: Amit Engel <Amit.Engel@dell.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-26nvme: Check for readiness more quickly, to speed up boot timeJosh Triplett
After initialization, nvme_wait_ready checks for readiness every 100ms, even though the drive may be ready far sooner than that. This delays system boot by hundreds of milliseconds. Reduce the delay, checking for readiness every millisecond instead. Boot-time tests on an AWS c5.12xlarge: Before: [ 0.546936] initcall nvme_init+0x0/0x5b returned 0 after 37 usecs ... [ 0.764178] nvme nvme0: 2/0/0 default/read/poll queues [ 0.768424] nvme0n1: p1 [ 0.774132] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ 0.774146] VFS: Mounted root (ext4 filesystem) on device 259:1. ... [ 0.788141] Run /sbin/init as init process After: [ 0.537088] initcall nvme_init+0x0/0x5b returned 0 after 37 usecs ... [ 0.543457] nvme nvme0: 2/0/0 default/read/poll queues [ 0.548473] nvme0n1: p1 [ 0.554339] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null) [ 0.554344] VFS: Mounted root (ext4 filesystem) on device 259:1. ... [ 0.567931] Run /sbin/init as init process Signed-off-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-26nvme: log additional message for controller statusRupesh Girase
Log the controller status to know more about issue if it lies within kernel nvme subsytem or controller is unhealthy. Signed-off-by: Rupesh Girase <rgirase@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulakrni@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-26nvme: code cleanup nvme_identify_ns_desc()Chaitanya Kulkarni
The function nvme_identify_ns_desc() has 3 levels of nesting which make error message to exceeded > 80 char per line which is not aligned with the kernel code standards and rest of the NVMe subsystem code. Add a helper function to move the processing of the log when the command is successful by reducing the nesting and keeping the code < 80 char per line. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-26nvme: Don't deter users from enabling hwmon supportJean Delvare
I see no good reason for the "If unsure, say N" advice in the description of the NVME_HWMON configuration option. It is not dangerous, it does not select any other option, and has a fairly low overhead. As the option is already not enabled by default, further suggesting hesitant users to not enable it is not useful anyway. Unlike some other options where the description alone may not be sufficient for users to make a decision, NVME_HWMON is pretty simple to grasp in my opinion, so just let the user do what they want. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-26nvme: expose hostid via sysfs for fabrics controllersSagi Grimberg
We allow userspace to connect with a custom hostid which is useful for certain use-cases. However there is is no way to tell what is the hostid used to connect to a given controller. Expose this so userspace can correlate controllers based on hostid. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-26nvme: expose hostnqn via sysfs for fabrics controllersSagi Grimberg
We allow userspace to connect with a custom hostnqn which is useful for certain use-cases. However there is no way to tell what is the hostnqn used to connect to a given controller. Expose this so userspace can correlate controllers based on hostnqn. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-03-25net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} buildPablo Neira Ayuso
net/netfilter/nft_fwd_netdev.c: In function ‘nft_fwd_netdev_eval’: net/netfilter/nft_fwd_netdev.c:32:10: error: ‘struct sk_buff’ has no member named ‘tc_redirected’ pkt->skb->tc_redirected = 1; ^~ net/netfilter/nft_fwd_netdev.c:33:10: error: ‘struct sk_buff’ has no member named ‘tc_from_ingress’ pkt->skb->tc_from_ingress = 1; ^~ To avoid a direct dependency with tc actions from netfilter, wrap the redirect bits around CONFIG_NET_REDIRECT and move helpers to include/linux/skbuff.h. Turn on this toggle from the ifb driver, the only existing client of these bits in the tree. This patch adds skb_set_redirected() that sets on the redirected bit on the skbuff, it specifies if the packet was redirect from ingress and resets the timestamp (timestamp reset was originally missing in the netfilter bugfix). Fixes: bcfabee1afd99484 ("netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress") Reported-by: noreply@ellerman.id.au Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25net: ena: Add PCI shutdown handler to allow safe kexecGuilherme G. Piccoli
Currently ENA only provides the PCI remove() handler, used during rmmod for example. This is not called on shutdown/kexec path; we are potentially creating a failure scenario on kexec: (a) Kexec is triggered, no shutdown() / remove() handler is called for ENA; instead pci_device_shutdown() clears the master bit of the PCI device, stopping all DMA transactions; (b) Kexec reboot happens and the device gets enabled again, likely having its FW with that DMA transaction buffered; then it may trigger the (now invalid) memory operation in the new kernel, corrupting kernel memory area. This patch aims to prevent this, by implementing a shutdown() handler quite similar to the remove() one - the difference being the handling of the netdev, which is unregistered on remove(), but following the convention observed in other drivers, it's only detached on shutdown(). This prevents an odd issue in AWS Nitro instances, in which after the 2nd kexec the next one will fail with an initrd corruption, caused by a wild DMA write to invalid kernel memory. The lspci output for the adapter present in my instance is: 00:05.0 Ethernet controller [0200]: Amazon.com, Inc. Elastic Network Adapter (ENA) [1d0f:ec20] Suggested-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com> Acked-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25selftests/net/forwarding: define libs as TEST_PROGS_EXTENDEDHangbin Liu
The lib files should not be defined as TEST_PROGS, or we will run them in run_kselftest.sh. Also remove ethtool_lib.sh exec permission. Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25staging: rtl8723bs: Remove blank line before '}' braceSimran Singhal
Remove unneeded blank line before a close brace '}'. Issue found by checkpatch.pl: CHECK: Blank lines aren't necessary before a close brace '}' Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200325182617.GA9411@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: rtl8188eu: hal: Add space around operatorsShreeya Patel
Add space around operators for improving the code readability. Reported by checkpatch.pl git diff -w shows no difference. diff of the .o files before and after the changes shows no difference. Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com> Link: https://lore.kernel.org/r/20200325160142.3698-1-shreeya.patel23498@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: kpc2000: kpc_dma: Use spaces around operators.Sam Muhammed
Cleanup Checkpatch.pl CHECKs about missing spaces around multiple operators. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/22025abc8f8f3452c2d886e8faf1fe0532e8bb1d.1585143581.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: kpc2000: kpc_dma: Use kcalloc over kzalloc.Sam Muhammed
Replace kzalloc(sizeof(...) * n, ...) with kcalloc(n, sizeof(...), ...) since kcalloc is the preferred API in case of allocating with multiply. Checkpatch.pl: WARNING: Prefer kcalloc over kzalloc with multiply. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/4b8339d1e81e497c3c2f0dad57a9587338ec82b1.1585143581.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: kpc2000: kpc_dma: Use the SPDK comment style.Sam Muhammed
SPDK-License-Identifier comment should have this form // SPDX-License-Identifier: <GPL-...> Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/7531e3e3fa7c046e93d2caaa6fa2e76c5c53f04d.1585143581.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: kpc2000: kpc_dma: Include the preferred header.Sam Muhammed
<linux/io.h> is the preferred header to include instead of <asm/io.h>. Checkpatch.pl WARNING: Use #include <linux/io.h> instead of <asm/io.h> Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/c7a824c3a2ddc5f44bd89504b8c03a328d69f81d.1585143581.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: kpc2000: kpc_dma: Remove unnecessary braces.Sam Muhammed
Remove braces of single statement blocks, they are not really needed. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/0a3ec63321dce008fc8dd790f42ef8490135b307.1585143581.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: kpc2000: kpc_dma: Use sizeof(*var) in kzalloc().Sam Muhammed
kzalloc(sizeof(*var), ...) was the format been used across the driver, which is the preferred format, but missed two instances, correct them to match the coding standards. Checkpatch.pl CHECK: Prefer kzalloc(sizeof(*var)...) over kzalloc(sizeof(struct var)...) Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/bbb3adbd20ae89db6a0d3360bc09d22eed778e86.1585143581.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25Staging: kpc2000: kpc_dma: Remove comparison to NULL.Sam Muhammed
Comparison to NULL been used across the driver, remove them and use (!var) instead. Checkpatch.pl: CHECK: Comparison to NULL could be written "!desc"... etc Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/f344afba0a8bb0413941a63678688435f04a96b4.1585143581.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: hp100: Properly indent the multiline comments.Soumyajit Deb
Shift the end of multiline comments "*/" to the next line and align the lines of the comments properly to improve code readability and to adhere to the Linux Kernel coding style. Reported by checkpatch.pl Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com> Link: https://lore.kernel.org/r/20200325180003.46749-1-debsoumyajit100@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: rtl8723bs: Add line after variable declarationsSimran Singhal
Add whiteline after variable declarations to remove the checkpatch.pl warning: WARNING: Missing a blank line after declarations Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200325164451.GA17569@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: hp100: Add space around operatorSoumyajit Deb
Add space around "-" operator to improve code readability and adhere to the Linux kernel coding style. Reported by checkpatch.pl Signed-off-by: Soumyajit Deb <debsoumyajit100@gmail.com> Link: https://lore.kernel.org/r/20200325144353.42655-1-debsoumyajit100@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: rtl8723bs: Remove multiple assignmentsSimran Singhal
Remove multiple assignments by factorizing them. Problem found using checkpatch.pl:- CHECK: multiple assignments should be avoided Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200325142226.GA14711@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25staging: rtl8723bs: Remove unnecessary braces for single statementsSimran Singhal
Clean up unnecessary braces around single statement blocks. Issues reported by checkpatch.pl as: WARNING: braces {} are not necessary for single statement blocks Signed-off-by: Simran Singhal <singhalsimran0@gmail.com> Link: https://lore.kernel.org/r/20200325140245.GA11949@simran-Inspiron-5558 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25selftests/net: add missing tests to MakefileHangbin Liu
Find some tests are missed in Makefile by running: for file in $(ls *.sh); do grep -q $file Makefile || echo $file; done Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25Merge tag 'zonefs-5.6-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs Pull zonefs fix from Damien Le Moal: "A single fix from me to correctly handle the size of read-only zone files" * tag 'zonefs-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonfs: Fix handling of read-only zones
2020-03-25objtool: Re-arrange validate_functions()Peter Zijlstra
In preparation to adding a vmlinux.o specific pass, rearrange some code. No functional changes intended. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.924304616@infradead.org
2020-03-25objtool: Optimize find_rela_by_dest_range()Peter Zijlstra
Perf shows there is significant time in find_rela_by_dest(); this is because we have to iterate the address space per byte, looking for relocation entries. Optimize this by reducing the address space granularity. This reduces objtool on vmlinux.o runtime from 4.8 to 4.4 seconds. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.861321325@infradead.org
2020-03-25objtool: Delete cleanup()Peter Zijlstra
Perf shows we spend a measurable amount of time spend cleaning up right before we exit anyway. Avoid the needsless work and just terminate. This reduces objtool on vmlinux.o runtime from 5.4s to 4.8s Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.800720170@infradead.org
2020-03-25objtool: Optimize read_sections()Peter Zijlstra
Perf showed that __hash_init() is a significant portion of read_sections(), so instead of doing a per section rela_hash, use an elf-wide rela_hash. Statistics show us there are about 1.1 million relas, so size it accordingly. This reduces the objtool on vmlinux.o runtime to a third, from 15 to 5 seconds. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.739153726@infradead.org
2020-03-25objtool: Optimize find_symbol_by_name()Peter Zijlstra
Perf showed that find_symbol_by_name() takes time; add a symbol name hash. This shaves another second off of objtool on vmlinux.o runtime, down to 15 seconds. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.676865656@infradead.org
2020-03-25objtool: Resize insn_hashPeter Zijlstra
Perf shows we're spending a lot of time in find_insn() and the statistics show we have around 3.2 million instruction. Increase the hash table size to reduce the bucket load from around 50 to 3. This shaves about 2s off of objtool on vmlinux.o runtime, down to 16s. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.617882545@infradead.org
2020-03-25objtool: Rename find_containing_func()Peter Zijlstra
For consistency; we have: find_symbol_by_offset() / find_symbol_containing() find_func_by_offset() / find_containing_func() fix that. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lkml.kernel.org/r/20200324160924.558470724@infradead.org
generated by cgit (git 2.34.1) at 2025-09-11 22:58:10 +0000