summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-11Merge branch 'DSA-tag_8021q-cleanup'David S. Miller
Vladimir Oltean says: ==================== DSA tag_8021q cleanup This small series tries to consolidate the VLAN handling in DSA a little bit. It reworks tag_8021q to be minimally invasive to the dsa_switch_ops structure. This makes the rest of the code a bit easier to follow. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11Revert "net: dsa: Add more convenient functions for installing port VLANs"Vladimir Oltean
This reverts commit 314f76d7a68bab0516aa52877944e6aacfa0fc3f. Citing that commit message, the call graph was: dsa_slave_vlan_rx_add_vid dsa_port_setup_8021q_tagging | | | | | +-------------+ | | v v dsa_port_vid_add dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Now that tag_8021q has its own ops structure, it no longer relies on dsa_port_vid_add, and therefore on the dsa_switch_ops to install its VLANs. So dsa_port_vid_add now only has one single caller. So we can simplify the call graph to what it was before, aka: dsa_slave_vlan_rx_add_vid dsa_slave_port_obj_add | | +-------+ +-------+ | | v v dsa_port_vlan_add Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: dsa: tag_8021q: add a context structureVladimir Oltean
While working on another tag_8021q driver implementation, some things became apparent: - It is not mandatory for a DSA driver to offload the tag_8021q VLANs by using the VLAN table per se. For example, it can add custom TCAM rules that simply encapsulate RX traffic, and redirect & decapsulate rules for TX traffic. For such a driver, it makes no sense to receive the tag_8021q configuration through the same callback as it receives the VLAN configuration from the bridge and the 8021q modules. - Currently, sja1105 (the only tag_8021q user) sets a priv->expect_dsa_8021q variable to distinguish between the bridge calling, and tag_8021q calling. That can be improved, to say the least. - The crosschip bridging operations are, in fact, stateful already. The list of crosschip_links must be kept by the caller and passed to the relevant tag_8021q functions. So it would be nice if the tag_8021q configuration was more self-contained. This patch attempts to do that. Create a struct dsa_8021q_context which encapsulates a struct dsa_switch, and has 2 function pointers for adding and deleting a VLAN. These will replace the previous channel to the driver, which was through the .port_vlan_add and .port_vlan_del callbacks of dsa_switch_ops. Also put the list of crosschip_links into this dsa_8021q_context. Drivers that don't support cross-chip bridging can simply omit to initialize this list, as long as they dont call any cross-chip function. The sja1105_vlan_add and sja1105_vlan_del functions are refactored into a smaller sja1105_vlan_add_one, which now has 2 entry points: - sja1105_vlan_add, from struct dsa_switch_ops - sja1105_dsa_8021q_vlan_add, from the tag_8021q ops But even this change is fairly trivial. It just reflects the fact that for sja1105, the VLANs from these 2 channels end up in the same hardware table. However that is not necessarily true in the general sense (and that's the reason for making this change). The rest of the patch is mostly plain refactoring of "ds" -> "ctx". The dsa_8021q_context structure needs to be propagated because adding a VLAN is now done through the ops function pointers inside of it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: dsa: tag_8021q: setup tagging via a single function callVladimir Oltean
There is no point in calling dsa_port_setup_8021q_tagging for each individual port. Additionally, it will become more difficult to do that when we'll have a context structure to tag_8021q (next patch). So refactor this now. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: dsa: tag_8021q: include missing refcount.hVladimir Oltean
The previous assumption was that the caller would already have this header file included. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: ipa: fix u32_replace_bits by u32p_xxx versionVadym Kochan
Looks like u32p_replace_bits() should be used instead of u32_replace_bits() which does not modifies the value but returns the modified version. Fixes: 2b9feef2b6c2 ("soc: qcom: ipa: filter and routing tables") Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11crypto/chcr: move nic TLS functionality to drivers/netRohit Maheshwari
This patch moves complete nic tls offload (kTLS) code from crypto directory to drivers/net/ethernet/chelsio/inline_crypto/ch_ktls directory. nic TLS is made a separate ULD of cxgb4. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11hinic: fix rewaking txq after netif_tx_disableLuo bin
When calling hinic_close in hinic_set_channels, all queues are stopped after netif_tx_disable, but some queue may be rewaken in free_tx_poll by mistake while drv is handling tx irq. If one queue is rewaken core may call hinic_xmit_frame to send pkt after netif_tx_disable within a short time which may results in accessing memory that has been already freed in hinic_close. So we call napi_disable before netif_tx_disable in hinic_close to fix this bug. Fixes: 2eed5a8b614b ("hinic: add set_channels ethtool_ops support") Signed-off-by: Luo bin <luobin9@huawei.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11taprio: Fix allowing too small intervalsVinicius Costa Gomes
It's possible that the user specifies an interval that couldn't allow any packet to be transmitted. This also avoids the issue of the hrtimer handler starving the other threads because it's running too often. The solution is to reject interval sizes that according to the current link speed wouldn't allow any packet to be transmitted. Reported-by: syzbot+8267241609ae8c23b248@syzkaller.appspotmail.com Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2020-09-09 This series contains updates to i40e and igc drivers. Stefan Assmann changes num_vlans to u16 to fix may be used uninitialized error and propagates error in i40_set_vsi_promisc() for i40e. Vinicius corrects timestamping latency values for i225 devices and accounts for TX timestamping delay for igc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11Merge branch 'sfc-encap-offloads-on-EF10'David S. Miller
Edward Cree says: ==================== sfc: encap offloads on EF10 EF10 NICs from the 8000 series onwards support TX offloads (checksumming, TSO) on VXLAN- and NVGRE-encapsulated packets. This series adds driver support for these offloads. Changes from v1: * Fix 'no TXQ of type' error handling in patch #1 (and clear up the misleading comment that inspired the wrong version) * Add comment in patch #5 explaining what the deal with TSOv3 is ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: advertise encapsulated offloads on EF10Edward Cree
Necessitates an .ndo_features_check, as the EF10 datapath has several limitations on what it can handle. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: implement encapsulated TSO on EF10Edward Cree
>From the 8000 series onwards, EF10 NICs with suitable firmware are able to perform TSO within VXLAN or NVGRE encapsulation. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: de-indirect TSO handlingEdward Cree
Remove the tx_queue->handle_tso function pointer, and just use tx_queue->tso_version to decide which function to call, thus removing an indirect call from the fast path. Instead of passing a tso_v2 flag to efx_mcdi_tx_init(), set the desired tx_queue->tso_version before calling it. In efx_mcdi_tx_init(), report back failure to obtain a TSOv2 context by setting tx_queue->tso_version to 0, which will cause the TX path to use the GSO-based fallback. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: select inner-csum-offload TX queues for skbs that need itEdward Cree
Won't actually be exercised until we start advertising the corresponding offload features. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: create inner-csum queues on EF10 if supportedEdward Cree
If the MC reports the VXLAN_NVGRE datapath capability, then these queues can be used for checksum offload of encapsulated packets. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: define inner/outer csum offload TXQ typesEdward Cree
Nothing yet creates inner csum TXQs; just change all references to EFX_TXQ_TYPE_OFFLOAD to the new EFX_TXQ_TYPE_OUTER_CSUM. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: decouple TXQ type from labelEdward Cree
Make it possible to have an arbitrary mapping from types to labels, because when we add inner-csum-offload TXQs there will no longer be a convenient nesting hierarchy of NIC types (EF10 will have inner-csum TXQs, while Siena will have HIGHPRI). Correct a misleading comment on efx_hard_start_xmit(). Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11octeontx2-af: Constify npc_kpu_profile_{action,cam}Rikard Falkeborn
These are never modified, so constify them to allow the compiler to place them in read-only memory. This moves about 25kB to read-only memory as seen by the output of the size command. Before: text data bss dec hex filename 296203 65464 1248 362915 589a3 drivers/net/ethernet/marvell/octeontx2/af/octeontx2_af.ko After: text data bss dec hex filename 321003 40664 1248 362915 589a3 drivers/net/ethernet/marvell/octeontx2/af/octeontx2_af.ko Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11Merge branch 'sfc-misc-cleanups'David S. Miller
Edward Cree says: ==================== sfc: misc cleanups Clean up a few nits I noticed while working on TXQ stuff. ==================== Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: cleanups around efx_alloc_channelEdward Cree
The old_channel argument is never used, so remove it. The function is only called from elsewhere in efx_channels.c, so make it static and remove the declaration from the header file. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: remove spurious unreachable return statementEdward Cree
The statement above it already returns, so there is no way to get here. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11sfc: remove duplicate call to efx_init_channels from EF100 probeEdward Cree
efx_init_struct already calls this, we don't need to do it again. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11bridge: mcast: Fix incomplete MDB dumpIdo Schimmel
Each MDB entry is encoded in a nested netlink attribute called 'MDBA_MDB_ENTRY'. In turn, this attribute contains another nested attributed called 'MDBA_MDB_ENTRY_INFO', which encodes a single port group entry within the MDB entry. The cited commit added the ability to restart a dump from a specific port group entry. However, on failure to add a port group entry to the dump the entire MDB entry (stored in 'nest2') is removed, resulting in missing port group entries. Fix this by finalizing the MDB entry with the partial list of already encoded port group entries. Fixes: 5205e919c9f0 ("net: bridge: mcast: add support for src list and filter mode dumping") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11ipv6: remove redundant assignment to variable errColin Ian King
The variable err is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Also re-order variable declarations in reverse Christmas tree ordering. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11enetc: Fix mdio bus removal on PF probe bailoutClaudiu Manoil
This is the correct resolution for the conflict from merging the "net" tree fix: commit 26cb7085c898 ("enetc: Remove the mdio bus on PF probe bailout") with the "net-next" new work: commit 07095c025ac2 ("net: enetc: Use DT protocol information to set up the ports") that moved mdio bus allocation to an ealier stage of the PF probing routine. Fixes: a57066b1a019 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11Merge branch 'ag71xx-add-ethtool-and-flow-control-support'David S. Miller
Oleksij Rempel says: ==================== ag71xx: add ethtool and flow control support The main target of this patches is to provide flow control support for ag71xx driver. To be able to validate this functionality, I also added ethtool support with HW counters. So, this patches was validated with iperf3 and counters showing Pause frames send or received by this NIC. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: ag71xx: add flow control supportOleksij Rempel
Add flow control support. The functionality was tested on AR9331 SoC and confirmed by iperf3 results and HW counters exported over ethtool. Following test configurations was used: iMX6S receiver <--- TL-SG1005D switch <---- AR9331 sender The switch is supporting symmytric flow control: Settings for eth0: Supported ports: [ MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full --->> Link partner advertised pause frame use: Symmetric Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Auto-negotiation: on Port: MII PHYAD: 4 Transceiver: external Link detected: yes The iMX6S system was configured to 10Mbit, to let the switch use flow control: - ethtool -s eth0 speed 10 With flow control disabled on AR9331: - ethtool -A eth0 rx off tx off - iperf3 -u -c 172.17.0.1 -b100M -l1472 -t10 [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-10.00 sec 66.2 MBytes 55.5 Mbits/sec 0.000 ms 0/47155 (0%) sender [ 5] 0.00-10.04 sec 11.5 MBytes 9.57 Mbits/sec 1.309 ms 38986/47146 (83%) receiver With flow control enabled on AR9331: - ethtool -A eth0 rx on tx on - iperf3 -u -c 172.17.0.1 -b100M -l1472 -t10 [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-10.00 sec 15.1 MBytes 12.6 Mbits/sec 0.000 ms 0/10727 (0%) sender [ 5] 0.00-10.05 sec 11.5 MBytes 9.57 Mbits/sec 1.371 ms 2525/10689 (24%) receiver Similar results are get in opposite direction by introducing extra CPU load on AR9331: - chrt 40 dd if=/dev/zero of=/dev/null & Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: ag71xx: add ethtool supportOleksij Rempel
Add basic ethtool support. The functionality was tested on AR9331 SoC. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11drivers/net/wan/x25_asy: Remove an unused flag "SLF_OUTWAIT"Xie He
The "SLF_OUTWAIT" flag defined in x25_asy.h is not actually used. It is only cleared at one place in x25_asy.c but is never read or set. So we can remove it. Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: stmmac: set get_rx_header_len() as void for it didn't have any error ↵Luo Jiaxing
code to return We found the following warning when using W=1 to build kernel: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3634:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] int ret, coe = priv->hw->rx_csum; When digging stmmac_get_rx_header_len(), dwmac4_get_rx_header_len() and dwxgmac2_get_rx_header_len() return 0 only, without any error code to report. Therefore, it's better to define get_rx_header_len() as void. Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11Merge branch 'Add-GVE-Features'David S. Miller
David Awogbemila says: ==================== Add GVE Features. Note: Patch 4 in v3 was dropped. Patch 4 (patch 5 in v3): Start/stop timer only when report stats is enabled/disabled. Patch 7 (patch 8 in v3): Use netdev_info, not dev_info, to log device link status. ==================== Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11gve: Enable Link Speed Reporting in the driver.David Awogbemila
This change allows the driver to report the device link speed when the ethtool command: ethtool <nic name> is run. Getting the link speed is done via a new admin queue command: ReportLinkSpeed. Reviewed-by: Yangchun Fu <yangchun@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11gve: Use link status register to report link statusPatricio Noyola
This makes the driver better aware of the connectivity status of the device. Based on the device's status register, the driver can call netif_carrier_{on,off}. Reviewed-by: Yangchun Fu <yangchun@google.com> Signed-off-by: Patricio Noyola <patricion@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11gve: Batch AQ commands for creating and destroying queues.Sagi Shahar
Adds support for batching AQ commands and uses it for creating and destroying queues. Reviewed-by: Yangchun Fu <yangchun@google.com> Signed-off-by: Sagi Shahar <sagis@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11gve: NIC stats for report-stats and for ethtoolDavid Awogbemila
This adds per queue NIC stats to ethtool stats and to report-stats. These stats are always exposed to guest whether or not the report-stats flag is turned on. Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.Kuo Zhao
This adds functionality to report driver stats to Hypervisor. (Users may want to turn this feature off as a matter of privacy so a "report-stats" flag is added as an ethtool priv option. It is also disabled by default.) The hypervisor would trigger a stats report in case "too many" packets dropped; the stats would be useful in debugging stuck queues. A "stats_report_trigger_cnt" stat is added to count the number of times the hypervisor attempts to trigger stats report. A timer is also added so that when report-stats is enabled, stat are updated once every 20 seconds. Reviewed-by: Yangchun Fu <yangchun@google.com> Signed-off-by: Kuo Zhao <kuozhao@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11gve: Use dev_info/err instead of netif_info/err.Catherine Sullivan
Update the driver to use dev_info/err instead of netif_info/err. Reviewed-by: Yangchun Fu <yangchun@google.com> Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11gve: Add stats for gve.Kuo Zhao
Sample output of "ethtool -S <interface-name>" with 1 RX queue and 1 TX queue: NIC statistics: rx_packets: 1039 tx_packets: 37 rx_bytes: 822071 tx_bytes: 4100 rx_dropped: 0 tx_dropped: 0 tx_timeouts: 0 rx_skb_alloc_fail: 0 rx_buf_alloc_fail: 0 rx_desc_err_dropped_pkt: 0 interface_up_cnt: 1 interface_down_cnt: 0 reset_cnt: 0 page_alloc_fail: 0 dma_mapping_error: 0 rx_posted_desc[0]: 1365 rx_completed_desc[0]: 341 rx_bytes[0]: 215094 rx_dropped_pkt[0]: 0 rx_copybreak_pkt[0]: 3 rx_copied_pkt[0]: 3 tx_posted_desc[0]: 6 tx_completed_desc[0]: 6 tx_bytes[0]: 420 tx_wake[0]: 0 tx_stop[0]: 0 tx_event_counter[0]: 6 adminq_prod_cnt: 34 adminq_cmd_fail: 0 adminq_timeouts: 0 adminq_describe_device_cnt: 1 adminq_cfg_device_resources_cnt: 1 adminq_register_page_list_cnt: 16 adminq_unregister_page_list_cnt: 0 adminq_create_tx_queue_cnt: 8 adminq_create_rx_queue_cnt: 8 adminq_destroy_tx_queue_cnt: 0 adminq_destroy_rx_queue_cnt: 0 adminq_dcfg_device_resources_cnt: 0 adminq_set_driver_parameter_cnt: 0 Reviewed-by: Yangchun Fu <yangchun@google.com> Signed-off-by: Kuo Zhao <kuozhao@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11gve: Get and set Rx copybreak via ethtoolKuo Zhao
This adds support for getting and setting the RX copybreak value via ethtool. Reviewed-by: Yangchun Fu <yangchun@google.com> Signed-off-by: Kuo Zhao <kuozhao@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11Merge tag 'ceph-for-5.9-rc5' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fix from Ilya Dryomov: "Add missing capability checks in rbd, marked for stable" * tag 'ceph-for-5.9-rc5' of git://github.com/ceph/ceph-client: rbd: require global CAP_SYS_ADMIN for mapping and unmapping
2020-09-11Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Usual driver bugfixes for the I2C subsystem" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: algo: pca: Reapply i2c bus settings after reset i2c: npcm7xx: Fix timeout calculation misc: eeprom: at24: register nvmem only after eeprom is ready to use
2020-09-11Merge tag 'wireless-drivers-next-2020-09-11' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.10 First set of patches for v5.10. Most noteworthy here is ath11k getting initial support for QCA6390 and IPQ6018 devices. But most of the patches are cleanup: W=1 warning fixes, fallthrough keywords, DMA API changes and tasklet API changes. Major changes: ath10k * support SDIO firmware codedumps * support station specific TID configurations ath11k * add support for IPQ6018 * add support for QCA6390 PCI devices ath9k * add support for NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 to improve PTK0 rekeying wcn36xx * add support for TX ack ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11RISC-V: Take text_mutex in ftrace_init_nop()Palmer Dabbelt
Without this we get lockdep failures. They're spurious failures as SMP isn't up when ftrace_init_nop() is called. As far as I can tell the easiest fix is to just take the lock, which also seems like the safest fix. Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Guo Ren <guoren@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-09-11Merge tag 'pm-5.9-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix three pieces of documentation and add new CPU IDs to the Intel RAPL power capping driver. Specifics: - Add CPU IDs of the TigerLake Desktop, RocketLake and AlderLake chips to the Intel RAPL power capping driver (Zhang Rui). - Add the missing energy model performance domain item to the struct device kerneldoc comment (Randy Dunlap). - Fix the struct powercap_control_type kerneldoc comment to match the actual definition of that structure and add missing item to the struct powercap_zone_ops kerneldoc comment (Amit Kucheria)" * tag 'pm-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap: make documentation reflect code PM: <linux/device.h>: fix @em_pd kernel-doc warning powercap/intel_rapl: add support for AlderLake powercap/intel_rapl: add support for RocketLake powercap/intel_rapl: add support for TigerLake Desktop
2020-09-11Merge tag 'block-5.9-2020-09-11' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Fix a regression in bdev partition locking (Christoph) - NVMe pull request from Christoph: - cancel async events before freeing them (David Milburn) - revert a broken race fix (James Smart) - fix command processing during resets (Sagi Grimberg) - Fix a kyber crash with requeued flushes (Omar) - Fix __bio_try_merge_page() same_page error for no merging (Ritesh) * tag 'block-5.9-2020-09-11' of git://git.kernel.dk/linux-block: block: Set same_page to false in __bio_try_merge_page if ret is false nvme-fabrics: allow to queue requests for live queues block: only call sched requeue_request() for scheduled requests nvme-tcp: cancel async events before freeing event struct nvme-rdma: cancel async events before freeing event struct nvme-fc: cancel async events before freeing event struct nvme: Revert: Fix controller creation races with teardown flow block: restore a specific error code in bdev_del_partition
2020-09-11Merge tag 'spi-fix-v5.9-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "There's some driver specific fixes here plus one core fix for memory leaks that could be triggered by a potential race condition when cleaning up after we have split transfers to fit into what the controller can support" * tag 'spi-fix-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: stm32: fix pm_runtime_get_sync() error checking spi: Fix memory leak on splited transfers spi: spi-cadence-quadspi: Fix mapping of buffers for DMA reads spi: stm32: Rate-limit the 'Communication suspended' message spi: spi-loopback-test: Fix out-of-bounds read spi: spi-cadence-quadspi: Populate get_name() interface MAINTAINERS: add myself as maintainer for spi-fsl-dspi driver
2020-09-11Merge tag 'regulator-fix-v5.9-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "The biggest set of fixes here is those from Michał Mirosław fixing some locking issues with coupled regulators that are triggered in cases where a coupled regulator is used by a device involved in fs_reclaim like eMMC storage. These are relatively serious for the affected systems, though the circumstances where they trigger are very rare" * tag 'regulator-fix-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: pwm: Fix machine constraints application regulator: core: Fix slab-out-of-bounds in regulator_unlock_recursive() regulator: remove superfluous lock in regulator_resolve_coupling() regulator: cleanup regulator_ena_gpio_free() regulator: plug of_node leak in regulator_register()'s error path regulator: push allocation in set_consumer_device_supply() out of lock regulator: push allocations in create_regulator() outside of lock regulator: push allocation in regulator_ena_gpio_request() out of lock regulator: push allocation in regulator_init_coupling() outside of lock regulator: fix spelling mistake "Cant" -> "Can't" regulator: cros-ec-regulator: Add NULL test for devm_kmemdup call
2020-09-11KVM: x86: always allow writing '0' to MSR_KVM_ASYNC_PF_ENVitaly Kuznetsov
Even without in-kernel LAPIC we should allow writing '0' to MSR_KVM_ASYNC_PF_EN as we're not enabling the mechanism. In particular, QEMU with 'kernel-irqchip=off' fails to start a guest with qemu-system-x86_64: error: failed to set MSR 0x4b564d02 to 0x0 Fixes: 9d3c447c72fb2 ("KVM: X86: Fix async pf caused null-ptr-deref") Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200911093147.484565-1-vkuznets@redhat.com> [Actually commit the version proposed by Sean Christopherson. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-11KVM: SVM: Periodically schedule when unregistering regions on destroyDavid Rientjes
There may be many encrypted regions that need to be unregistered when a SEV VM is destroyed. This can lead to soft lockups. For example, on a host running 4.15: watchdog: BUG: soft lockup - CPU#206 stuck for 11s! [t_virtual_machi:194348] CPU: 206 PID: 194348 Comm: t_virtual_machi RIP: 0010:free_unref_page_list+0x105/0x170 ... Call Trace: [<0>] release_pages+0x159/0x3d0 [<0>] sev_unpin_memory+0x2c/0x50 [kvm_amd] [<0>] __unregister_enc_region_locked+0x2f/0x70 [kvm_amd] [<0>] svm_vm_destroy+0xa9/0x200 [kvm_amd] [<0>] kvm_arch_destroy_vm+0x47/0x200 [<0>] kvm_put_kvm+0x1a8/0x2f0 [<0>] kvm_vm_release+0x25/0x30 [<0>] do_exit+0x335/0xc10 [<0>] do_group_exit+0x3f/0xa0 [<0>] get_signal+0x1bc/0x670 [<0>] do_signal+0x31/0x130 Although the CLFLUSH is no longer issued on every encrypted region to be unregistered, there are no other changes that can prevent soft lockups for very large SEV VMs in the latest kernel. Periodically schedule if necessary. This still holds kvm->lock across the resched, but since this only happens when the VM is destroyed this is assumed to be acceptable. Signed-off-by: David Rientjes <rientjes@google.com> Message-Id: <alpine.DEB.2.23.453.2008251255240.2987727@chino.kir.corp.google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-21 03:14:20 +0000