summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-10bpf: add skb_postpush_rcsum and fix dev_forward_skb occasionsDaniel Borkmann
Add a small helper skb_postpush_rcsum() and fix up redirect locations that need CHECKSUM_COMPLETE fixups on ingress. dev_forward_skb() expects a proper csum that covers also Ethernet header, f.e. since 2c26d34bbcc0 ("net/core: Handle csum for CHECKSUM_COMPLETE VXLAN forwarding"), we also do skb_postpull_rcsum() after pulling Ethernet header off via eth_type_trans(). When using eBPF in a netns setup f.e. with vxlan in collect metadata mode, I can trigger the following csum issue with an IPv6 setup: [ 505.144065] dummy1: hw csum failure [...] [ 505.144108] Call Trace: [ 505.144112] <IRQ> [<ffffffff81372f08>] dump_stack+0x44/0x5c [ 505.144134] [<ffffffff81607cea>] netdev_rx_csum_fault+0x3a/0x40 [ 505.144142] [<ffffffff815fee3f>] __skb_checksum_complete+0xcf/0xe0 [ 505.144149] [<ffffffff816f0902>] nf_ip6_checksum+0xb2/0x120 [ 505.144161] [<ffffffffa08c0e0e>] icmpv6_error+0x17e/0x328 [nf_conntrack_ipv6] [ 505.144170] [<ffffffffa0898eca>] ? ip6t_do_table+0x2fa/0x645 [ip6_tables] [ 505.144177] [<ffffffffa08c0725>] ? ipv6_get_l4proto+0x65/0xd0 [nf_conntrack_ipv6] [ 505.144189] [<ffffffffa06c9a12>] nf_conntrack_in+0xc2/0x5a0 [nf_conntrack] [ 505.144196] [<ffffffffa08c039c>] ipv6_conntrack_in+0x1c/0x20 [nf_conntrack_ipv6] [ 505.144204] [<ffffffff8164385d>] nf_iterate+0x5d/0x70 [ 505.144210] [<ffffffff816438d6>] nf_hook_slow+0x66/0xc0 [ 505.144218] [<ffffffff816bd302>] ipv6_rcv+0x3f2/0x4f0 [ 505.144225] [<ffffffff816bca40>] ? ip6_make_skb+0x1b0/0x1b0 [ 505.144232] [<ffffffff8160b77b>] __netif_receive_skb_core+0x36b/0x9a0 [ 505.144239] [<ffffffff8160bdc8>] ? __netif_receive_skb+0x18/0x60 [ 505.144245] [<ffffffff8160bdc8>] __netif_receive_skb+0x18/0x60 [ 505.144252] [<ffffffff8160ccff>] process_backlog+0x9f/0x140 [ 505.144259] [<ffffffff8160c4a5>] net_rx_action+0x145/0x320 [...] What happens is that on ingress, we push Ethernet header back in, either from cls_bpf or right before skb_do_redirect(), but without updating csum. The "hw csum failure" can be fixed by using the new skb_postpush_rcsum() helper for the dev_forward_skb() case to correct the csum diff again. Thanks to Hannes Frederic Sowa for the csum_partial() idea! Fixes: 3896d655f4d4 ("bpf: introduce bpf_clone_redirect() helper") Fixes: 27b29f63058d ("bpf: add bpf_redirect() helper") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10net, sched: add skb_at_tc_ingress helperDaniel Borkmann
Add a skb_at_tc_ingress() as this will be needed elsewhere as well and can hide the ugly ifdef. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10Merge branch 'tcp-keepalive-namespaceify'David S. Miller
Nikolay Borisov says: ==================== Namespaceify tcp keepalive machinery The following patch series enables the tcp keepalive mechanism to be configured per net namespace. This is especially useful if you have multiple containers hosted on one node and one of them is under DoS- in such situations one thing which could be done is to configure the tcp keepalive settings such that connections for that particular container are being reset faster. Another scenario where not being able to control those knob comes per container is problematic is occurs the value of net.netfilter.nf_conntrack_tcp_timeout_established is set below the keepalive interval, in such situations the server won't send an RST packet resulting in applications not trying to reconnect and stale connection waiting. Changing the global keepalive value is a possible solution but it might interfere with other containers. The three patches gradually convert each of the affected knobs to be per netns. I thought it would be easier for review than put everything in one patch. If people deem it more appropriate to squash everything in one patch (maybe after review) I'd be more than happy to do it. The patches have been compile-tested on 4.4 and functionally tested on 3.12 and they work as expected. These are based off 4.4-rc8 ==================== Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10ipv4: Namespecify the tcp_keepalive_intvl sysctl knobNikolay Borisov
This is the final part required to namespaceify the tcp keep alive mechanism. Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10ipv4: Namespecify tcp_keepalive_probes sysctl knobNikolay Borisov
This is required to have full tcp keepalive mechanism namespace support. Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10ipv4: Namespaceify tcp_keepalive_time sysctl knobNikolay Borisov
Different net namespaces might have different requirements as to the keepalive time of tcp sockets. This might be required in cases where different firewall rules are in place which require tcp timeout sockets to be increased/decreased independently of the host. Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10udp: restrict offloads to one namespaceHannes Frederic Sowa
udp tunnel offloads tend to aggregate datagrams based on inner headers. gro engine gets notified by tunnel implementations about possible offloads. The match is solely based on the port number. Imagine a tunnel bound to port 53, the offloading will look into all DNS packets and tries to aggregate them based on the inner data found within. This could lead to data corruption and malformed DNS packets. While this patch minimizes the problem and helps an administrator to find the issue by querying ip tunnel/fou, a better way would be to match on the specific destination ip address so if a user space socket is bound to the same address it will conflict. Cc: Tom Herbert <tom@herbertland.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10Merge branch 'mlxsw-layer2-multicast'David S. Miller
Jiri Pirko says: ==================== mlxsw: Adding layer 2 multicast Elad says: This patchset add Linux hardware reflection for L2 multicast offload and add MC support in mlxsw. For every bridge MDB entry insertion, either by IGMP snooping or by static insertion/removal, a switchdev ops is been called. In mlxsw, a new multicast group (MID) is been created and ports are assigned. When all ports are removed, the multicast group is been deleted. --- v1->v2: - GFP_ATOMIC->GFP_KERNEL change in patch 7/8 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10switchdev: Adding IGMP snooping documentationElad Raz
Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10mlxsw: Adding layer 2 multicast supportElad Raz
Add SWITCHDEV_OBJ_ID_PORT_MDB switchdev ops support. On first MDB insertion creates a new multicast group (MID) and add members port to the MID. Also add new MDB entry for the flooding-domain (fid-vid) and link the MDB entry to the newly constructed MC group. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10mlxsw: Adding VID to FID translatationElad Raz
Adding a generic function that translate VID to FID. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10mlxsw: Changing the maximum number of multicast group to a defineElad Raz
Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10mlxsw: reg: Adding SMID registerElad Raz
Adding back SMID register definition and packing. For each MC group a new SMID entry will be generated. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10mlxsw: reg: Add definition of multicast record for SFD registerElad Raz
Multicast-related records have specific format in SFD register. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10bridge: Reflect MDB entries to hardwareElad Raz
Offload MDB changes per port to hardware Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10switchdev: Adding MDB entry offloadElad Raz
Define HW multicast entry: MAC and VID. Using a MAC address simplifies support for both IPV4 and IPv6. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10um: Use race-free temporary file creationMickaël Salaün
Open the memory mapped file with the O_TMPFILE flag when available. Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Acked-by: Tristan Schmelcher <tschmelcher@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-01-10um: Do not set unsecure permission for temporary fileMickaël Salaün
Remove the insecure 0777 mode for temporary file to prohibit other users to change the executable mapped code. An attacker could gain access to the mapped file descriptor from the temporary file (before it is unlinked) in a read-only mode but it should not be accessible in write mode to avoid arbitrary code execution. To not change the hostfs behavior, the temporary file creation permission now depends on the current umask(2) and the implementation of mkstemp(3). Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Acked-by: Tristan Schmelcher <tschmelcher@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-01-10um: Fix build error and kconfig for i386Mickaël Salaün
Fix build error by generating elfcore.o only when ELF_CORE (depending on COREDUMP) is selected: arch/x86/um/built-in.o: In function `elf_core_write_extra_phdrs': (.text+0x3e62): undefined reference to `dump_emit' arch/x86/um/built-in.o: In function `elf_core_write_extra_data': (.text+0x3eef): undefined reference to `dump_emit' Fixes: 5d2acfc7b974 ("kconfig: make allnoconfig disable options behind EMBEDDED and EXPERT") Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2016-01-10um: Add seccomp supportMickaël Salaün
This brings SECCOMP_MODE_STRICT and SECCOMP_MODE_FILTER support through prctl(2) and seccomp(2) to User-mode Linux for i386 and x86_64 subarchitectures. secure_computing() is called first in handle_syscall() so that the syscall emulation will be aborted quickly if matching a seccomp rule. This is inspired from Meredydd Luff's patch (https://gerrit.chromium.org/gerrit/21425). Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: James Hogan <james.hogan@imgtec.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: David Drysdale <drysdale@google.com> Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Kees Cook <keescook@chromium.org>
2016-01-10um: Add full asm/syscall.h supportMickaël Salaün
Add subarchitecture-independent implementation of asm-generic/syscall.h allowing access to user system call parameters and results: * syscall_get_nr() * syscall_rollback() * syscall_get_error() * syscall_get_return_value() * syscall_set_return_value() * syscall_get_arguments() * syscall_set_arguments() * syscall_get_arch() provided by arch/x86/um/asm/syscall.h This provides the necessary syscall helpers needed by HAVE_ARCH_SECCOMP_FILTER plus syscall_get_error(). This is inspired from Meredydd Luff's patch (https://gerrit.chromium.org/gerrit/21425). Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: David Drysdale <drysdale@google.com> Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Kees Cook <keescook@chromium.org>
2016-01-10selftests/seccomp: Remove the need for HAVE_ARCH_TRACEHOOKMickaël Salaün
Some architectures do not implement PTRACE_GETREGSET nor PTRACE_SETREGSET (required by HAVE_ARCH_TRACEHOOK) but only implement PTRACE_GETREGS and PTRACE_SETREGS (e.g. User-mode Linux). This improve seccomp selftest portability for architectures without HAVE_ARCH_TRACEHOOK support by defining a new trigger HAVE_GETREGS. For now, this is only enabled for i386 and x86_64 architectures. This is required to be able to run this tests on User-mode Linux. Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: David Drysdale <drysdale@google.com> Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Kees Cook <keescook@chromium.org>
2016-01-10um: Fix ptrace GETREGS/SETREGS bugsMickaël Salaün
This fix two related bugs: * PTRACE_GETREGS doesn't get the right orig_ax (syscall) value * PTRACE_SETREGS can't set the orig_ax value (erased by initial value) Get rid of the now useless and error-prone get_syscall(). Fix inconsistent behavior in the ptrace implementation for i386 when updating orig_eax automatically update the syscall number as well. This is now updated in handle_syscall(). Signed-off-by: Mickaël Salaün <mic@digikod.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Anton Ivanov <aivanov@brocade.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: David Drysdale <drysdale@google.com> Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Kees Cook <keescook@chromium.org>
2016-01-10um: link with -lpthreadVegard Nossum
Similarly to commit fb1770aa78a43530940d0c2dd161e77bc705bdac, with gcc 5 on Ubuntu and CONFIG_STATIC_LINK=y I was seeing these linker errors: /usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/librt.a(timer_create.o): In function `__timer_create_new': (.text+0xcd): undefined reference to `pthread_once' /usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/librt.a(timer_create.o): In function `__timer_create_new': (.text+0x126): undefined reference to `pthread_attr_init' /usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/librt.a(timer_create.o): In function `__timer_create_new': (.text+0x168): undefined reference to `pthread_attr_setdetachstate' [...] Obviously we also need -lpthread for librt.a. Cc: stable@vger.kernel.org # 4.4 Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-01-10um: Update UBD to use pread/pwrite family of functionsAnton Ivanov
This decreases the number of syscalls per read/write by half. Signed-off-by: Anton Ivanov <aivanov@brocade.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-01-10um: Do not change hard IRQ flags in soft IRQ processingAnton Ivanov
Software IRQ processing in generic architectures assumes that the exit out of hard IRQ may have re-enabled interrupts (some architectures may have an implicit EOI). It presumes them enabled and toggles the flags once more just in case unless this is turned off in the architecture specific hardirq.h by setting __ARCH_IRQ_EXIT_IRQS_DISABLED This patch adds this to UML where due to the way IRQs are handled it is an optimization (it works fine without it too). Signed-off-by: Anton Ivanov <aivanov@brocade.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-01-10um: Prevent IRQ handler reentrancyAnton Ivanov
The existing IRQ handler design in UML does not prevent reentrancy This is mitigated by fd-enable/fd-disable semantics for the IO portion of the UML subsystem. The timer, however, can and is re-entered resulting in very deep stack usage and occasional stack exhaustion. This patch prevents this by checking if there is a timer interrupt in-flight before processing any pending timer interrupts. Signed-off-by: Anton Ivanov <aivanov@brocade.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-01-10uml: flush stdout before forkingVegard Nossum
I was seeing some really weird behaviour where piping UML's output somewhere would cause output to get duplicated: $ ./vmlinux | head -n 40 Checking that ptrace can change system call numbers...Core dump limits : soft - 0 hard - NONE OK Checking syscall emulation patch for ptrace...Core dump limits : soft - 0 hard - NONE OK Checking advanced syscall emulation patch for ptrace...Core dump limits : soft - 0 hard - NONE OK Core dump limits : soft - 0 hard - NONE This is because these tests do a fork() which duplicates the non-empty stdout buffer, then glibc flushes the duplicated buffer as each child exits. A simple workaround is to flush before forking. Cc: stable@vger.kernel.org Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-01-10uml: fix hostfs mknod()Vegard Nossum
An inverted return value check in hostfs_mknod() caused the function to return success after handling it as an error (and cleaning up). It resulted in the following segfault when trying to bind() a named unix socket: Pid: 198, comm: a.out Not tainted 4.4.0-rc4 RIP: 0033:[<0000000061077df6>] RSP: 00000000daae5d60 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 000000006092a460 RCX: 00000000dfc54208 RDX: 0000000061073ef1 RSI: 0000000000000070 RDI: 00000000e027d600 RBP: 00000000daae5de0 R08: 00000000da980ac0 R09: 0000000000000000 R10: 0000000000000003 R11: 00007fb1ae08f72a R12: 0000000000000000 R13: 000000006092a460 R14: 00000000daaa97c0 R15: 00000000daaa9a88 Kernel panic - not syncing: Kernel mode fault at addr 0x40, ip 0x61077df6 CPU: 0 PID: 198 Comm: a.out Not tainted 4.4.0-rc4 #1 Stack: e027d620 dfc54208 0000006f da981398 61bee000 0000c1ed daae5de0 0000006e e027d620 dfcd4208 00000005 6092a460 Call Trace: [<60dedc67>] SyS_bind+0xf7/0x110 [<600587be>] handle_syscall+0x7e/0x80 [<60066ad7>] userspace+0x3e7/0x4e0 [<6006321f>] ? save_registers+0x1f/0x40 [<6006c88e>] ? arch_prctl+0x1be/0x1f0 [<60054985>] fork_handler+0x85/0x90 Let's also get rid of the "cosmic ray protection" while we're at it. Fixes: e9193059b1b3 "hostfs: fix races in dentry_name() and inode_name()" Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Richard Weinberger <richard@nod.at>
2016-01-10cgroup: fix a typo.Rami Rosen
This patch fixes a typo in a comment in cgroup.c. Signed-off-by: Rami Rosen <rami.rosen@intel.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-10m68k: Provide __phys_to_pfn() and __pfn_to_phys()Sudip Mukherjee
The defconfig build of m68k was failing with the error: implicit declaration of function '__pfn_to_phys' Other architectures have added <asm/memory.h>, but if we do so here then we will also get redeclaration of some other functions. So it is better to copy these macros into page.h. Fixes: 0a3c3bf11240 ("x86, mm: introduce vmem_altmap to augment vmemmap_populate()") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Cc: Dan Williams <dan.j.williams@intel.com> Reported-by: Guenter Roeck <linux@roeck-us.net> (m68knommu) [geert: Apply to page.h instead of page_mm.h to cover nommu, reword] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-01-10m68k/atari, m68k/sun3: Fix SCSI platform device registration when driver is ↵Finn Thain
modular Fixes: 3ff228af84b5 ("atari_scsi: Convert to platform device") Fixes: 0d31f8759109 ("sun3_scsi: Convert to platform device") Reported-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-01-10ubifs: Use XATTR_*_PREFIX_LENRichard Weinberger
...instead of open coding it. Signed-off-by: Richard Weinberger <richard@nod.at>
2016-01-10UBIFS: add a comment in key.h for unused parameterDongsheng Yang
Add a comment in key.h to explain why we keep an unused parameter in key helpers. Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-01-10mtd: ubi: wl: avoid erasing a PEB which is emptySebastian Siewior
wear_leveling_worker() currently unconditionally puts a PEB on erase in the error case even it just been taken from the free_list and never used. In case the PEB was never used it can be put back on the free list saving a precious erase cycle. v1…v2: - to_leb_clean -> dst_leb_clean - use the nested option for ensure_wear_leveling() - do_sync_erase() can't go -ENOMEM so we can just go into RO-mode now. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-01-09Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Antonio Quartulli says: ==================== Included changes: - increase internal module version - increase BLA wait periods to 6 - purge BLA backbone table when it is disabled - make sure post function is invoked only if sysfs value is changed - simplify code by removing useless NULL checks - various corrections to existing kerneldoc - minor cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-09mlxsw: spectrum: remove FDB entry in case we get unknown object notificationJiri Pirko
It may happen that we get notification for FDB entry for object (port, lag, vport), which does not exist. Currently we ignore that, which only causes this being re-sent in next notification. The entry will never disappear. So get rid of it by simply removing it using SFD register. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-09mlxsw: spectrum: pass local_port to mlxsw_sp_port_fdb_uc_opJiri Pirko
Do not pass struct mlxsw_sp_port to mlxsw_sp_port_fdb_uc_op and rather just pass local_port. This is needed in case this is called from SFN process function and mlxsw_sp_port is not existent for particular local_port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-09vxlan: fix test which detect duplicate vxlan ifaceNicolas Dichtel
When a vxlan interface is created, the driver checks that there is not another vxlan interface with the same properties. To do this, it checks the existing vxlan udp socket. Since commit 1c51a9159dde, the creation of the vxlan socket is done only when the interface is set up, thus it breaks that test. Example: $ ip l a vxlan10 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 $ ip l a vxlan11 type vxlan id 10 group 239.0.0.10 dev eth0 dstport 0 $ ip -br l | grep vxlan vxlan10 DOWN f2:55:1c:6a:fb:00 <BROADCAST,MULTICAST> vxlan11 DOWN 7a:cb:b9:38:59:0d <BROADCAST,MULTICAST> Instead of checking sockets, let's loop over the vxlan iface list. Fixes: 1c51a9159dde ("vxlan: fix race caused by dropping rtnl_unlock") Reported-by: Thomas Faivre <thomas.faivre@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-09net: plip: use new parport device modelSudip Mukherjee
Modify plip driver to use the new parallel port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-09cdc-acm: fix NULL pointer referenceOliver Neukum
The union descriptor must be checked. Its usage was conditional before the parser was introduced. This is important, because many RNDIS device, which also use the common parser, have bogus extra descriptors. Signed-off-by: Oliver Neukum <oneukum@suse.com> Tested-by: Vasily Galkin <galkin-vv@yandex.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-09Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "A single fix for machines with pages > 4k (PPC mostly). There's a bug in our optimal transfer size code where we don't account for pages > 4k and can set the transfer size to be less than the page size causing nasty failures" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: sd: Reject optimal transfer length smaller than page size
2016-01-09Merge tag 'pci-v4.4-fixes-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixlet from Bjorn Helgaas: "This marks the TI DRA7xx host bridge driver as broken. Apparently it has never worked without some additional out-of-tree code, so I'm going to mark it broken now and remove it completely next cycle unless it's fixed" * tag 'pci-v4.4-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: dra7xx: Mark driver as broken
2016-01-09Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: New features: - Allow using trace events fields as sort order keys, making 'perf evlist --trace_fields' show those, and then the user can select a subset and use like: perf top -e sched:sched_switch -s prev_comm,next_comm That works as well in 'perf report' when handling files containing tracepoints. The default when just tracepoint events are found in a perf.data file is to format it like ftrace, using the libtraceevent formatters, plugins, etc (Namhyung Kim) - Add support in 'perf script' to process 'perf stat record' generated files, culminating in a python perf script that calculates CPI (Cycles per Instruction) (Jiri Olsa) - Show random perf tool tips in the 'perf report' bottom line (Namhyung Kim) - perf report now defaults to --group if the perf.data file has grouped events, try it with: # perf record -e '{cycles,instructions}' -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.093 MB perf.data (1247 samples) ] # perf report # Samples: 1K of event 'anon group { cycles, instructions }' # Event count (approx.): 1955219195 # # Overhead Command Shared Object Symbol 2.86% 0.22% swapper [kernel.kallsyms] [k] intel_idle 1.05% 0.33% firefox libxul.so [.] js::SetObjectElement 1.05% 0.00% kworker/0:3 [kernel.kallsyms] [k] gen6_ring_get_seqno 0.88% 0.17% chrome chrome [.] 0x0000000000ee27ab 0.65% 0.86% firefox libxul.so [.] js::ValueToId<(js::AllowGC)1> 0.64% 0.23% JS Helper libxul.so [.] js::SplayTree<js::jit::LiveRange*, js::jit::LiveRange>::splay 0.62% 1.27% firefox libxul.so [.] js::GetIterator 0.61% 1.74% firefox libxul.so [.] js::NativeSetProperty 0.61% 0.31% firefox libxul.so [.] js::SetPropertyByDefining User visible fixes: - Coect data mmaps so that the DWARF unwinder can handle usecases needing them, like softice (Jiri Olsa) - Decay callchains in fractal mode, fixing up cases where 'perf top -g' would show entries with more than 100% (Namhyung Kim) Infrastructure changes: - Sync tools/lib with the lib/ in the kernel sources for find_bit.c and move bitmap.[ch] from tools/perf/util/ to tools/lib/ (Arnaldo Carvalho de Melo) - No need to set attr.sample_freq in some 'perf test' entries that only want to deal with PERF_RECORD_ meta-events, improve a bit error output for CQM test (Arnaldo Carvalho de Melo) - Fix python binding build, adding some missing object files now required due to cpumap using find_bit stuff (Arnaldo Carvalho de Melo) - tools/build improvemnts (Jiri Olsa) - Add more files to cscope/ctags databases (Jiri Olsa) - Do not show 'trace' in 'perf help' if it is not compiled in (Jiri Olsa) - Make perf_evlist__open() open evsels with their cpus and threads, like perf record does, making them consistent (Adrian Hunter) - Fix pmu snapshot initialization bug (Stephane Eranian) - Add missing headers in perf's MANIFEST (Wang Nan) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-09hwmon: (nct6683) Add basic support for NCT6683 on Mitac boardsGuenter Roeck
Mitac microcode differs from Intel microcode. One key difference is that pwm values can be written. Detect vendor from customer ID field and no longer use DMI data to identify which microcode is running on the chip. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-01-09batman-adv: Add kerneldoc for batadv_neigh_node::refcountSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: Remove kerneldoc for missing struct membersSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: Fix kerneldoc member names in for main structsSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: Fix kernel-doc parsing of main structsSven Eckelmann
kernel-doc is not able to skip an #ifdef between the kernel documentation block and the start of the struct. Moving the #ifdef before the kernel doc block avoids this problem Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: Change ifconfig examples to iproute2Sven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
generated by cgit (git 2.34.1) at 2025-09-12 00:22:20 +0000