summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-11-20bcm63xx_uart: Use the device name when registering an interruptSimon Arlott
Use the device name when registering an interrupt so that multiple ports don't all have the same interrupt name. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-20tty: Fix direct use of tty buffer workPeter Hurley
Recent abstraction of tty buffer work introduced api to manage tty input kworker; use it. Fixes: e176058f0de5 ("tty: Abstract tty buffer work") Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-20tty: Fix tty_send_xchar() lock order inversionPeter Hurley
The correct lock order is atomic_write_lock => termios_rwsem, as established by tty_write() => n_tty_write(). Fixes: c274f6ef1c666 ("tty: Hold termios_rwsem for tcflow(TCIxxx)") Reported-and-Tested-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-20slub: mark the dangling ifdef #else of CONFIG_SLUB_DEBUGJesper Dangaard Brouer
The #ifdef of CONFIG_SLUB_DEBUG is located very far from the associated #else. For readability mark it with a comment. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20slub: avoid irqoff/on in bulk allocationChristoph Lameter
Use the new function that can do allocation while interrupts are disabled. Avoids irq on/off sequences. Signed-off-by: Christoph Lameter <cl@linux.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20slub: create new ___slab_alloc function that can be called with irqs disabledChristoph Lameter
Bulk alloc needs a function like that because it enables interrupts before calling __slab_alloc which promptly disables them again using the expensive local_irq_save(). Signed-off-by: Christoph Lameter <cl@linux.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20mm: fix up sparse warning in gfpflags_allow_blockingJeff Layton
sparse says: include/linux/gfp.h:274:26: warning: incorrect type in return expression (different base types) include/linux/gfp.h:274:26: expected bool include/linux/gfp.h:274:26: got restricted gfp_t ...add a forced cast to silence the warning. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20ocfs2: fix umask ignored issueJunxiao Bi
New created file's mode is not masked with umask, and this makes umask not work for ocfs2 volume. Fixes: 702e5bc ("ocfs2: use generic posix ACL infrastructure") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Gang He <ghe@suse.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20PM/OPP: add entry in MAINTAINERSViresh Kumar
Add entry for operating performance points into MAINTAINERS file. This will also allow get_maintainers to list OPP stakeholders properly. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Rafael Wysocki <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20kernel/panic.c: turn off locks debug before releasing console lockVitaly Kuznetsov
Commit 08d78658f393 ("panic: release stale console lock to always get the logbuf printed out") introduced an unwanted bad unlock balance report when panic() is called directly and not from OOPS (e.g. from out_of_memory()). The difference is that in case of OOPS we disable locks debug in oops_enter() and on direct panic call nobody does that. Fixes: 08d78658f393 ("panic: release stale console lock to always get the logbuf printed out") Reported-by: kernel test robot <ying.huang@linux.intel.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Baoquan He <bhe@redhat.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Jan Kara <jack@suse.cz> Cc: Petr Mladek <pmladek@suse.cz> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20kernel/signal.c: unexport sigsuspend()Richard Weinberger
sigsuspend() is nowhere used except in signal.c itself, so we can mark it static do not pollute the global namespace. But this patch is more than a boring cleanup patch, it fixes a real issue on UserModeLinux. UML has a special console driver to display ttys using xterm, or other terminal emulators, on the host side. Vegard reported that sometimes UML is unable to spawn a xterm and he's facing the following warning: WARNING: CPU: 0 PID: 908 at include/linux/thread_info.h:128 sigsuspend+0xab/0xc0() It turned out that this warning makes absolutely no sense as the UML xterm code calls sigsuspend() on the host side, at least it tries. But as the kernel itself offers a sigsuspend() symbol the linker choose this one instead of the glibc wrapper. Interestingly this code used to work since ever but always blocked signals on the wrong side. Some recent kernel change made the WARN_ON() trigger and uncovered the bug. It is a wonderful example of how much works by chance on computers. :-) Fixes: 68f3f16d9ad0f1 ("new helper: sigsuspend()") Signed-off-by: Richard Weinberger <richard@nod.at> Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Tested-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> [3.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20kasan: fix kmemleak false-positive in kasan_module_alloc()Andrey Ryabinin
Kmemleak reports the following leak: unreferenced object 0xfffffbfff41ea000 (size 20480): comm "modprobe", pid 65199, jiffies 4298875551 (age 542.568s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff82354f5e>] kmemleak_alloc+0x4e/0xc0 [<ffffffff8152e718>] __vmalloc_node_range+0x4b8/0x740 [<ffffffff81574072>] kasan_module_alloc+0x72/0xc0 [<ffffffff810efe68>] module_alloc+0x78/0xb0 [<ffffffff812f6a24>] module_alloc_update_bounds+0x14/0x70 [<ffffffff812f8184>] layout_and_allocate+0x16f4/0x3c90 [<ffffffff812faa1f>] load_module+0x2ff/0x6690 [<ffffffff813010b6>] SyS_finit_module+0x136/0x170 [<ffffffff8239bbc9>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff kasan_module_alloc() allocates shadow memory for module and frees it on module unloading. It doesn't store the pointer to allocated shadow memory because it could be calculated from the shadowed address, i.e. kasan_mem_to_shadow(addr). Since kmemleak cannot find pointer to allocated shadow, it thinks that memory leaked. Use kmemleak_ignore() to tell kmemleak that this is not a leak and shadow memory doesn't contain any pointers. Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20fat: fix fake_offset handling on error pathOGAWA Hirofumi
For the root directory, . and .. are faked (using dir_emit_dots()) and ctx->pos is reset from 2 to 0. A corrupted root directory could cause fat_get_entry() to fail, but ->iterate() (fat_readdir()) reports progress to the VFS (with ctx->pos rewound to 0), so any following calls to ->iterate() continue to return the same entries again and again. The result is that userspace will never see the end of the directory, causing e.g. 'ls' to hang in a getdents() loop. [hirofumi@mail.parknet.co.jp: cleanup and make sure to correct fake_offset] Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Tested-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Richard Weinberger <richard.weinberger@gmail.com> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20mm/hugetlbfs: fix bugs in fallocate hole punch of areas with holesMike Kravetz
Hugh Dickins pointed out problems with the new hugetlbfs fallocate hole punch code. These problems are in the routine remove_inode_hugepages and mostly occur in the case where there are holes in the range of pages to be removed. These holes could be the result of a previous hole punch or simply sparse allocation. The current code could access pages outside the specified range. remove_inode_hugepages handles both hole punch and truncate operations. Page index handling was fixed/cleaned up so that the loop index always matches the page being processed. The code now only makes a single pass through the range of pages as it was determined page faults could not race with truncate. A cond_resched() was added after removing up to PAGEVEC_SIZE pages. Some totally unnecessary code in hugetlbfs_fallocate() that remained from early development was also removed. Tested with fallocate tests submitted here: http://librelist.com/browser//libhugetlbfs/2015/6/25/patch-tests-add-tests-for-fallocate-system-call/ And, some ftruncate tests under development Fixes: b5cec28d36f5 ("hugetlbfs: truncate_hugepages() takes a range of pages") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Hillf Danton" <hillf.zj@alibaba-inc.com> Cc: <stable@vger.kernel.org> [4.3] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20mm/page-writeback.c: initialize m_dirty to avoid compile warningYang Shi
When building kernel with gcc 5.2, the below warning is raised: mm/page-writeback.c: In function 'balance_dirty_pages.isra.10': mm/page-writeback.c:1545:17: warning: 'm_dirty' may be used uninitialized in this function [-Wmaybe-uninitialized] unsigned long m_dirty, m_thresh, m_bg_thresh; The m_dirty{thresh, bg_thresh} are initialized in the block of "if (mdtc)", so if mdts is null, they won't be initialized before being used. Initialize m_dirty to zero, also initialize m_thresh and m_bg_thresh to keep consistency. They are used later by if condition: !mdtc || m_dirty <= dirty_freerun_ceiling(m_thresh, m_bg_thresh) If mdtc is null, dirty_freerun_ceiling will not be called at all, so the initialization will not change any behavior other than just ceasing the compile warning. (akpm: the patch actually reduces .text size by ~20 bytes on gcc-4.x.y) [akpm@linux-foundation.org: add comment] Signed-off-by: Yang Shi <yang.shi@linaro.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20various: fix pci_set_dma_mask return value checkingChristoph Hellwig
pci_set_dma_mask returns a negative errno value, not a bool like pci_dma_supported. This of course was just a giant test for attention :) Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Jongman Heo <jongman.heo@samsung.com> Tested-by: Jongman Heo <jongman.heo@samsung.com> [pcnet32] Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20mm: loosen MADV_NOHUGEPAGE to enable Qemu postcopy on s390Jason J. Herne
MADV_NOHUGEPAGE processing is too restrictive. kvm already disables hugepage but hugepage_madvise() takes the error path when we ask to turn on the MADV_NOHUGEPAGE bit and the bit is already on. This causes Qemu's new postcopy migration feature to fail on s390 because its first action is to madvise the guest address space as NOHUGEPAGE. This patch modifies the code so that the operation succeeds without error now. For consistency reasons do the same for MADV_HUGEPAGE. Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20mm: vmalloc: don't remove inexistent guard hole in remove_vm_area()Jerome Marchand
Commit 71394fe50146 ("mm: vmalloc: add flag preventing guard hole allocation") missed a spot. Currently remove_vm_area() decreases vm->size to "remove" the guard hole page, even when it isn't present. All but one users just free the vm_struct rigth away and never access vm->size anyway. Don't touch the size in remove_vm_area() and have __vunmap() use the proper get_vm_area_size() helper. Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20tools/vm/page-types.c: support KPF_IDLENaoya Horiguchi
PageIdle is exported in include/uapi/linux/kernel-page-flags.h, so let's make page-types.c tool handle it. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20ncpfs: don't allow negative timeoutsDan Carpenter
This code causes a static checker warning because it's a user controlled variable where we cap the upper bound but not the lower bound. Let's return an -EINVAL for negative timeouts. [akpm@linux-foundation.org: remove unneeded `else'] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jan Kara <jack@suse.com> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: David Howells <dhowells@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20configfs: allow dynamic group creationDaniel Baluta
This patchset introduces IIO software triggers, offers a way of configuring them via configfs and adds the IIO hrtimer based interrupt source to be used with software triggers. The architecture is now split in 3 parts, to remove all IIO trigger specific parts from IIO configfs core: (1) IIO configfs - creates the root of the IIO configfs subsys. (2) IIO software triggers - software trigger implementation, dynamically creating /config/iio/triggers group. (3) IIO hrtimer trigger - is the first interrupt source for software triggers (with syfs to follow). Each trigger type can implement its own set of attributes. Lockdep seems to be happy with the locking in configfs patch. This patch (of 5): We don't want to hardcode default groups at subsystem creation time. We export: * configfs_register_group * configfs_unregister_group to allow drivers to programatically create/destroy groups later, after module init time. This is needed for IIO configfs support. (akpm: the other 4 patches to be merged via the IIO tree) Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Suggested-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Octavian Purdila <octavian.purdila@intel.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Adriana Reus <adriana.reus@intel.com> Cc: Cristina Opriceana <cristina.opriceana@gmail.com> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20MAINTAINERS: add Moritz as reviewer for FPGA Manager FrameworkMoritz Fischer
Nominate myself as Reviewer. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Alan Tull <atull@opensource.altera.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20slab.h: sprinkle __assume_aligned attributesRasmus Villemoes
The various allocators return aligned memory. Telling the compiler that allows it to generate better code in many cases, for example when the return value is immediately passed to memset(). Some code does become larger, but at least we win twice as much as we lose: $ scripts/bloat-o-meter /tmp/vmlinux vmlinux add/remove: 0/0 grow/shrink: 13/52 up/down: 995/-2140 (-1145) An example of the different (and smaller) code can be seen in mm_alloc(). Before: : 48 8d 78 08 lea 0x8(%rax),%rdi : 48 89 c1 mov %rax,%rcx : 48 89 c2 mov %rax,%rdx : 48 c7 00 00 00 00 00 movq $0x0,(%rax) : 48 c7 80 48 03 00 00 movq $0x0,0x348(%rax) : 00 00 00 00 : 31 c0 xor %eax,%eax : 48 83 e7 f8 and $0xfffffffffffffff8,%rdi : 48 29 f9 sub %rdi,%rcx : 81 c1 50 03 00 00 add $0x350,%ecx : c1 e9 03 shr $0x3,%ecx : f3 48 ab rep stos %rax,%es:(%rdi) After: : 48 89 c2 mov %rax,%rdx : b9 6a 00 00 00 mov $0x6a,%ecx : 31 c0 xor %eax,%eax : 48 89 d7 mov %rdx,%rdi : f3 48 ab rep stos %rax,%es:(%rdi) So gcc's strategy is to do two possibly (but not really, of course) unaligned stores to the first and last word, then do an aligned rep stos covering the middle part with a little overlap. Maybe arches which do not allow unaligned stores gain even more. I don't know if gcc can actually make use of alignments greater than 8 for anything, so one could probably drop the __assume_xyz_alignment macros and just use __assume_aligned(8). The increases in code size are mostly caused by gcc deciding to opencode strlen() using the check-four-bytes-at-a-time trick when it knows the buffer is sufficiently aligned (one function grew by 200 bytes). Now it turns out that many of these strlen() calls showing up were in fact redundant, and they're gone from -next. Applying the two patches to next-20151001 bloat-o-meter instead says add/remove: 0/0 grow/shrink: 6/52 up/down: 244/-2140 (-1896) Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "A few bugfixes and one PCI ID addition from I2C" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i801: add Intel Lewisburg device IDs i2c: fix wakeup irq parsing i2c: xiic: Prevent concurrent running of the IRQ handler and __xiic_start_xfer() i2c: Revert "i2c: xiic: Do not reset controller before every transfer" i2c: imx: fix a compiling error
2015-11-20Merge tag '4.4-fix' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fix from Jon Corbet: "A single fix from Mauro for a 4.4 regression that would cause the docs build to fail on systems with ancient Perl installations" * tag '4.4-fix' of git://git.lwn.net/linux: kernel-doc: Make it compatible with Perl versions below 5.12 again
2015-11-20drm/amdgpu: remove vm->mutexChunming Zhou
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-11-20drm/amdgpu: add mutex for ba_va->valids/invalidsChunming Zhou
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-11-20drm/amdgpu: adapt vce session create interface changesLeo Liu
Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-11-20drm/amdgpu: vce use multiple cache surface starting from stoneyLeo Liu
Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-11-20drm/amdgpu: reset vce trap interrupt flagLeo Liu
Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-11-20Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: - A collection of crash and deadlock fixes for DAX that are also tagged for -stable. We will look to re-enable DAX pmd mappings in 4.5, but for now 4.4 and -stable should disable it by default. - A fixup to ext2 and ext4 to mirror the same warning emitted by XFS when mounting with "-o dax" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: block: protect rw_page against device teardown mm, dax: fix DAX deadlocks (COW fault) dax: disable pmd mappings ext2, ext4: warn when mounting with dax enabled
2015-11-20tipc: correct settings of broadcast link stateJon Paul Maloy
Since commit 5266698661401afc5e ("tipc: let broadcast packet reception use new link receive function") the broadcast send link state was meant to always be set to LINK_ESTABLISHED, since we don't need this link to follow the regular link FSM rules. It was also the intention that this state anyway shouldn't impact the run-time working state of the link, since the latter in reality is controlled by the number of registered peers. We have now discovered that this assumption is not quite correct. If the broadcast link is reset because of too many retransmissions, its state will inadvertently go to LINK_RESETTING, and never go back to LINK_ESTABLISHED, because the LINK_FAILURE event was not anticipated. This will work well once, but if it happens a second time, the reset on a link in LINK_RESETTING has has no effect, and neither the broadcast link nor the unicast links will go down as they should. Furthermore, it is confusing that the management tool shows that this link is in UP state when that obviously isn't the case. We now ensure that this state strictly follows the true working state of the link. The state is set to LINK_ESTABLISHED when the number of peers is non-zero, and to LINK_RESET otherwise. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20Merge tag 'pm+acpi-4.4-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management and ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups (ACPI core, PM core, cpufreq, ACPI EC driver, device properties) including three reverts of recent intel_pstate driver commits due to a regression introduced by one of them plus support for Atom Airmont cores in intel_pstate (which really boils down to adding new frequency tables for Airmont) and additional turbostat updates. Specifics: - Revert three recent intel_pstate driver commits one of which introduced a regression and the remaining two depend on the problematic one (Rafael Wysocki). - Fix breakage related to the recently introduced ACPI _CCA object support in the PCI DMA setup code (Suravee Suthikulpanit). - Fix up the recently introduced ACPI CPPC support to only use the hardware-reduced version of the PCCT structure as the only architecture to support it (ARM64) will only use hardware-reduced ACPI anyway (Ashwin Chaugule). - Fix a cpufreq mediatek driver build problem (Arnd Bergmann). - Fix the SMBus transaction handling implementation in the ACPI core to avoid re-entrant calls to wait_event_timeout() which makes intermittent boot stalls related to the Smart Battery Subsystem initialization go away and revert a workaround of another problem with the same underlying root cause (Chris Bainbridge). - Fix the generic wakeup interrupts framework to avoid using invalid IRQ numbers (Dmitry Torokhov). - Remove a redundant check from the ACPI EC driver (Markus Elfring). - Modify the intel_pstate driver so it can support more Atom flavors than just one (Baytrail) and add support for Atom Airmont cores (which require new freqnency tables) to it (Philippe Longepe). - Clean up MSR-related symbols in turbostat (Len Brown)" * tag 'pm+acpi-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PCI: Fix OF logic in pci_dma_configure() Revert "Documentation: kernel_parameters for Intel P state driver" cpufreq: mediatek: fix build error cpufreq: intel_pstate: Add separate support for Airmont cores cpufreq: intel_pstate: Replace BYT with ATOM Revert "cpufreq: intel_pstate: Use ACPI perf configuration" Revert "cpufreq: intel_pstate: Avoid calculation for max/min" ACPI-EC: Drop unnecessary check made before calling acpi_ec_delete_query() Revert "ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook" ACPI / SMBus: Fix boot stalls / high CPU caused by reentrant code PM / wakeirq: check that wake IRQ is valid before accepting it ACPI / CPPC: Use h/w reduced version of the PCCT structure x86: remove unused definition of MSR_NHM_PLATFORM_INFO tools/power turbostat: use new name for MSR_PLATFORM_INFO
2015-11-20net: ethernet: add driver for Aurora VLSI NB8800 Ethernet controllerMåns Rullgård
This adds a driver for the Aurora VLSI NB8800 Ethernet controller. It is an almost complete rewrite of a driver originally found in a Sigma Designs 2.6.22 tree. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20scsi: hpsa: select CONFIG_SCSI_SAS_ATTRArnd Bergmann
The hpsa driver recently started using the sas transport class, but it does not ensure that the corresponding code is actually built, which may lead to a link error: drivers/built-in.o: In function `hpsa_free_sas_phy': (.text+0x1ce874): undefined reference to `sas_port_delete_phy' (.text+0x1ce87c): undefined reference to `sas_phy_free' drivers/built-in.o: In function `hpsa_alloc_sas_port': (.text+0x1ceb9c): undefined reference to `sas_port_alloc_num' (.text+0x1ceba8): undefined reference to `sas_port_add' drivers/built-in.o: In function `hpsa_init': (.init.text+0x8838): undefined reference to `sas_attach_transport' (.init.text+0x8868): undefined reference to `sas_release_transport This adds 'select SCSI_SAS_ATTR' in the Kconfig entry, just like we do for all other drivers using those functions. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: d04e62b9d63a ("hpsa: add in sas transport class") Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-20scsi: advansys needs ISA dma api for ISA supportArnd Bergmann
The advansys drvier uses the request_dma function that is used on ISA machines for the internal DMA controller, which causes build errors on platforms that have ISA slots but do not provide the ISA DMA API: drivers/scsi/advansys.c: In function 'advansys_board_found': drivers/scsi/advansys.c:11300:10: error: implicit declaration of function 'request_dma' [-Werror=implicit-function-declaration] The problem now showed up in ARM randconfig builds after commit 6571fb3f8b7f ("advansys: Update to version 3.5 and remove compilation warning") made it possible to build on platforms that have neither VIRT_TO_BUS nor ISA_DMA_API but that do have ISA. This adds the missing dependency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-20Merge tag 'powerpc-4.4-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixlet from Michael Ellerman: "Wire up sys_mlock2()" * tag 'powerpc-4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Wire up sys_mlock2()
2015-11-20ALSA: hda - Apply HP headphone fixups more genericallyTakashi Iwai
It turned out that many HP laptops suffer from the same problem as fixed in commit [c932b98c1e47: ALSA: hda - Apply pin fixup for HP ProBook 6550b]. But, it's tiresome to list up all such PCI SSIDs, as there are really lots of HP machines. Instead, we do a bit more clever, try to check the supposedly dock and built-in headphone pins, and apply the fixup when both seem valid. This rule can be applied generically to all models using the same quirk, so we'll fix all in a shot. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107491 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-11-20net: tulip: turn compile-time warning into dev_warn()Arnd Bergmann
The tulip driver causes annoying build-time warnings for allmodconfig builds for all recent architectures: dec/tulip/winbond-840.c:910:2: warning: #warning Processor architecture undefined dec/tulip/tulip_core.c:101:2: warning: #warning Processor architecture undefined! This is the last remaining warning for arm64, and I'd like to get rid of it. We don't really know the cache line size, architecturally it would be at least 16 bytes, but all implementations I found have 64 or 128 bytes. Configuring tulip for 32-byte lines as we do on ARM32 seems to be the safe but slow default, and nobody who cares about performance these days would use a tulip chip anyway, so we can just use that. To save the next person the job of trying to find out what this is for and picking a default for their architecture just to kill off the warning, I'm now removing the preprocessor #warning and turning it into a pr_warn or dev_warn that prints the equivalent information when the driver gets loaded. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20bnx2x: Fix vxlan removalYuval Mintz
Commmit ac7eccd4d48fc "bnx2x: track vxlan port count" contains a bug - Instead of achieving the required goal, vxlan configuration would not be removed since we're decrementing the port instead of the counter. CC: Jiri Benc <jbenc@redhat.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20tcp: fix potential huge kmalloc() calls in TCP_REPAIREric Dumazet
tcp_send_rcvq() is used for re-injecting data into tcp receive queue. Problems : - No check against size is performed, allowed user to fool kernel in attempting very large memory allocations, eventually triggering OOM when memory is fragmented. - In case of fault during the copy we do not return correct errno. Lets use alloc_skb_with_frags() to cook optimal skbs. Fixes: 292e8d8c8538 ("tcp: Move rcvq sending to tcp_input.c") Fixes: c0e88ff0f256 ("tcp: Repair socket queues") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20tcp: fix Fast Open snmp over-counting bugYuchung Cheng
Fix incrementing TCPFastOpenActiveFailed snmp stats multiple times when the handshake experiences multiple SYN timeouts. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20tcp: disable Fast Open on timeouts after handshakeYuchung Cheng
Some middle-boxes black-hole the data after the Fast Open handshake (https://www.ietf.org/proceedings/94/slides/slides-94-tcpm-13.pdf). The exact reason is unknown. The work-around is to disable Fast Open temporarily after multiple recurring timeouts with few or no data delivered in the established state. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20mac: validate mac_partition is within sectorKees Cook
If md->signature == MAC_DRIVER_MAGIC and md->block_size == 1023, a single 512 byte sector would be read (secsize / 512). However the partition structure would be located past the end of the buffer (secsize % 512). Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-20mtip32xx: use formatting capability of kthread_create_on_nodeRasmus Villemoes
kthread_create_on_node takes format+args, so there's no need to do the pretty-printing in advance. Moreover, "mtip_svc_thd_99" (including its '\0') only just fits in 16 bytes, so if index could ever go above 99 we'd have a stack buffer overflow. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-20net: cpsw: Fix ethernet regression for dm814xTony Lindgren
Commit b6745f6e4e63 ("drivers: net: cpsw: davinci_emac: move reading mac id to common file") started using of_machine_is_compatible for detecting type but missed at dm8148 causing Ethernet to stop working. Let's fix the issue by adding handling for dm814x. Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Mugunthnan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20NVMe: reap completion entries when deleting queueKeith Busch
Make sure that there are no unprocesssed entries on a completion queue before deleting it, and check for validity of the CQ door bell before writing completions to it. This fixes problems with doing a sysfs reset of the device while it's handling IO. Tested-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-20lightnvm: add free and bad lun info to show lunsJavier Gonzalez
Add free block, used block, and bad block information to the show debug interface. This information is used to debug how targets track blocks. Also, change debug function name to make it more generic. Signed-off-by: Javier Gonzalez <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-20lightnvm: keep track of block countsJavier Gonzalez
Maintain number of in use blocks, free blocks, and bad blocks in a per lun basis. This allows the upper layers to get information about the state of each lun. Also, account for blocks reserved to the device on the free block count. nr_free_blocks matches now the actual number of blocks on the free list when the device is booted. Signed-off-by: Javier Gonzalez <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-20nvme: lightnvm: use admin queues for admin cmdsWenwei Tao
According to the Open-Channel SSD Specification, the NVMe-NVM admin commands use vendor specific opcodes of NVMe, so use the NVMe admin queue to dispatch these commands. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Updated by me to include set bad block table as well and also use the admin queue for l2p len calculation. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
generated by cgit (git 2.34.1) at 2025-09-13 11:19:35 +0000