summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-12-04usb: dwc2: Fix HCD resumeStefan Wahren
The Raspberry Pi can suffer on interrupt storms on HCD resume. The dwc2 driver sometimes misses to enable HCD_FLAG_HW_ACCESSIBLE before re-enabling the interrupts. This causes a situation where both handler ignore a incoming port interrupt and force the upper layers to disable the dwc2 interrupt line. This leaves the USB interface in a unusable state: irq 66: nobody cared (try booting with the "irqpoll" option) CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 6.10.0-rc3 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x50/0x64 dump_stack_lvl from __report_bad_irq+0x38/0xc0 __report_bad_irq from note_interrupt+0x2ac/0x2f4 note_interrupt from handle_irq_event+0x88/0x8c handle_irq_event from handle_level_irq+0xb4/0x1ac handle_level_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from bcm2836_chained_handle_irq+0x24/0x28 bcm2836_chained_handle_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from generic_handle_arch_irq+0x34/0x44 generic_handle_arch_irq from __irq_svc+0x88/0xb0 Exception stack(0xc1b01f20 to 0xc1b01f68) 1f20: 0005c0d4 00000001 00000000 00000000 c1b09780 c1d6b32c c1b04e54 c1a5eae8 1f40: c1b04e90 00000000 00000000 00000000 c1d6a8a0 c1b01f70 c11d2da8 c11d4160 1f60: 60000013 ffffffff __irq_svc from default_idle_call+0x1c/0xb0 default_idle_call from do_idle+0x21c/0x284 do_idle from cpu_startup_entry+0x28/0x2c cpu_startup_entry from kernel_init+0x0/0x12c handlers: [<f539e0f4>] dwc2_handle_common_intr [<75cd278b>] usb_hcd_irq Disabling IRQ #66 So enable the HCD_FLAG_HW_ACCESSIBLE flag in case there is a port connection. Fixes: c74c26f6e398 ("usb: dwc2: Fix partial power down exiting by system resume") Closes: https://lore.kernel.org/linux-usb/3fd0c2fb-4752-45b3-94eb-42352703e1fd@gmx.net/T/ Link: https://lore.kernel.org/all/5e8cbce0-3260-2971-484f-fc73a3b2bd28@synopsys.com/ Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20241202001631.75473-2-wahrenst@gmx.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-04usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to ↵Lianqin Hu
accessing null pointer Considering that in some extreme cases, when u_serial driver is accessed by multiple threads, Thread A is executing the open operation and calling the gs_open, Thread B is executing the disconnect operation and calling the gserial_disconnect function,The port->port_usb pointer will be set to NULL. E.g. Thread A Thread B gs_open() gadget_unbind_driver() gs_start_io() composite_disconnect() gs_start_rx() gserial_disconnect() ... ... spin_unlock(&port->port_lock) status = usb_ep_queue() spin_lock(&port->port_lock) spin_lock(&port->port_lock) port->port_usb = NULL gs_free_requests(port->port_usb->in) spin_unlock(&port->port_lock) Crash This causes thread A to access a null pointer (port->port_usb is null) when calling the gs_free_requests function, causing a crash. If port_usb is NULL, the release request will be skipped as it will be done by gserial_disconnect. So add a null pointer check to gs_start_io before attempting to access the value of the pointer port->port_usb. Call trace: gs_start_io+0x164/0x25c gs_open+0x108/0x13c tty_open+0x314/0x638 chrdev_open+0x1b8/0x258 do_dentry_open+0x2c4/0x700 vfs_open+0x2c/0x3c path_openat+0xa64/0xc60 do_filp_open+0xb8/0x164 do_sys_openat2+0x84/0xf0 __arm64_sys_openat+0x70/0x9c invoke_syscall+0x58/0x114 el0_svc_common+0x80/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x38/0x68 Fixes: c1dca562be8a ("usb gadget: split out serial core") Cc: stable@vger.kernel.org Suggested-by: Prashanth K <quic_prashk@quicinc.com> Signed-off-by: Lianqin Hu <hulianqin@vivo.com> Acked-by: Prashanth K <quic_prashk@quicinc.com> Link: https://lore.kernel.org/r/TYUPR06MB62178DC3473F9E1A537DCD02D2362@TYUPR06MB6217.apcprd06.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-04usb: misc: onboard_usb_dev: skip suspend/resume sequence for USB5744 SMBus ↵Radhey Shyam Pandey
support USB5744 SMBus initialization is done once in probe() and doing it in resume is not supported so avoid going into suspend and reset the HUB. There is a sysfs property 'always_powered_in_suspend' to implement this feature but since default state should be set to a working configuration so override this property value. It fixes the suspend/resume testcase on Kria KR260 Robotics Starter Kit. Fixes: 6782311d04df ("usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support") Cc: stable@vger.kernel.org Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/1733165302-1694891-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-04usb: dwc3: xilinx: make sure pipe clock is deselected in usb2 only modeNeal Frager
When the USB3 PHY is not defined in the Linux device tree, there could still be a case where there is a USB3 PHY active on the board and enabled by the first stage bootloader. If serdes clock is being used then the USB will fail to enumerate devices in 2.0 only mode. To solve this, make sure that the PIPE clock is deselected whenever the USB3 PHY is not defined and guarantees that the USB2 only mode will work in all cases. Fixes: 9678f3361afc ("usb: dwc3: xilinx: Skip resets and USB3 register settings for USB2.0 mode") Cc: stable@vger.kernel.org Signed-off-by: Neal Frager <neal.frager@amd.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Link: https://lore.kernel.org/r/1733163111-1414816-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-04usb: core: hcd: only check primary hcd skip_phy_initializationXu Yang
Before commit 53a2d95df836 ("usb: core: add phy notify connect and disconnect"), phy initialization will be skipped even when shared hcd doesn't set skip_phy_initialization flag. However, the situation is changed after the commit. The hcd.c will initialize phy when add shared hcd. This behavior is unexpected for some platforms which will handle phy initialization by themselves. To avoid the issue, this will only check skip_phy_initialization flag of primary hcd since shared hcd normally follow primary hcd setting. Fixes: 53a2d95df836 ("usb: core: add phy notify connect and disconnect") Cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20241105090120.2438366-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-04usb: gadget: midi2: Fix interpretation of is_midi1 bitsTakashi Iwai
The UMP Function Block info m1.0 field (represented by is_midi1 sysfs entry) is an enumeration from 0 to 2, while the midi2 gadget driver incorrectly copies it to the corresponding snd_ump_block_info.flags bits as-is. This made the wrong bit flags set when m1.0 = 2. This patch corrects the wrong interpretation of is_midi1 bits. Fixes: 29ee7a4dddd5 ("usb: gadget: midi2: Add configfs support") Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20241127070213.8232-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-04usb: dwc3: imx8mp: fix software node kernel dumpXu Yang
When unbind and bind the device again, kernel will dump below warning: [ 173.972130] sysfs: cannot create duplicate filename '/devices/platform/soc/4c010010.usb/software_node' [ 173.981564] CPU: 2 UID: 0 PID: 536 Comm: sh Not tainted 6.12.0-rc6-06344-g2aed7c4a5c56 #144 [ 173.989923] Hardware name: NXP i.MX95 15X15 board (DT) [ 173.995062] Call trace: [ 173.997509] dump_backtrace+0x90/0xe8 [ 174.001196] show_stack+0x18/0x24 [ 174.004524] dump_stack_lvl+0x74/0x8c [ 174.008198] dump_stack+0x18/0x24 [ 174.011526] sysfs_warn_dup+0x64/0x80 [ 174.015201] sysfs_do_create_link_sd+0xf0/0xf8 [ 174.019656] sysfs_create_link+0x20/0x40 [ 174.023590] software_node_notify+0x90/0x100 [ 174.027872] device_create_managed_software_node+0xec/0x108 ... The '4c010010.usb' device is a platform device created during the initcall and is never removed, which causes its associated software node to persist indefinitely. The existing device_create_managed_software_node() does not provide a corresponding removal function. Replace device_create_managed_software_node() with the device_add_software_node() and device_remove_software_node() pair to ensure proper addition and removal of software nodes, addressing this issue. Fixes: a9400f1979a0 ("usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode") Cc: stable@vger.kernel.org Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20241126032841.2458338-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-04usb: typec: anx7411: fix OF node reference leaks in anx7411_typec_switch_probe()Joe Hattori
The refcounts of the OF nodes obtained by of_get_child_by_name() calls in anx7411_typec_switch_probe() are not decremented. Replace them with device_get_named_child_node() calls and store the return values to the newly created fwnode_handle fields in anx7411_data, and call fwnode_handle_put() on them in the error path and in the unregister functions. Fixes: e45d7337dc0e ("usb: typec: anx7411: Use of_get_child_by_name() instead of of_find_node_by_name()") Cc: stable@vger.kernel.org Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20241126014909.3687917-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-04usb: typec: anx7411: fix fwnode_handle reference leakJoe Hattori
An fwnode_handle and usb_role_switch are obtained with an incremented refcount in anx7411_typec_port_probe(), however the refcounts are not decremented in the error path. The fwnode_handle is also not decremented in the .remove() function. Therefore, call fwnode_handle_put() and usb_role_switch_put() accordingly. Fixes: fe6d8a9c8e64 ("usb: typec: anx7411: Add Analogix PD ANX7411 support") Cc: stable@vger.kernel.org Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20241121023429.962848-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-04usb: host: max3421-hcd: Correctly abort a USB request.Mark Tomlinson
If the current USB request was aborted, the spi thread would not respond to any further requests. This is because the "curr_urb" pointer would not become NULL, so no further requests would be taken off the queue. The solution here is to set the "urb_done" flag, as this will cause the correct handling of the URB. Also clear interrupts that should only be expected if an URB is in progress. Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.") Cc: stable <stable@kernel.org> Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20241124221430.1106080-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-04dt-bindings: phy: imx8mq-usb: correct reference to usb-switch.yamlXu Yang
The i.MX95 usb-phy can work with or without orientation-switch. With current setting, if usb-phy works without orientation-switch, the dt-schema check will show below error: phy@4c1f0040: 'oneOf' conditional failed, one must be fixed: 'port' is a required property 'ports' is a required property from schema $id: http://devicetree.org/schemas/phy/fsl,imx8mq-usb-phy.yaml# This will correct the behavior of referring to usb-switch.yaml. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20241119105017.917833-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-04usb: ehci-hcd: fix call balance of clocks handling routinesVitalii Mordan
If the clocks priv->iclk and priv->fclk were not enabled in ehci_hcd_sh_probe, they should not be disabled in any path. Conversely, if they was enabled in ehci_hcd_sh_probe, they must be disabled in all error paths to ensure proper cleanup. Found by Linux Verification Center (linuxtesting.org) with Klever. Fixes: 63c845522263 ("usb: ehci-hcd: Add support for SuperH EHCI.") Cc: stable@vger.kernel.org # ff30bd6a6618: sh: clk: Fix clk_enable() to return 0 on NULL clk Signed-off-by: Vitalii Mordan <mordan@ispras.ru> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20241121114700.2100520-1-mordan@ispras.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-04netfilter: ipset: Hold module reference while requesting a modulePhil Sutter
User space may unload ip_set.ko while it is itself requesting a set type backend module, leading to a kernel crash. The race condition may be provoked by inserting an mdelay() right after the nfnl_unlock() call. Fixes: a7b4f989a629 ("netfilter: ipset: IP set core support") Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-12-04phy: stm32: work around constant-value overflow assertionArnd Bergmann
FIELD_PREP() checks that a constant fits into the available bitfield, but if one of the two lookup tables in stm32_impedance_tune() does not find a matching entry, the index is out of range, which gcc correctly complains about: In file included from <command-line>: In function 'stm32_impedance_tune', inlined from 'stm32_combophy_pll_init' at drivers/phy/st/phy-stm32-combophy.c:247:9: include/linux/compiler_types.h:517:38: error: call to '__compiletime_assert_447' declared with attribute error: FIELD_PREP: value too large for the field 517 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) | ^ include/linux/bitfield.h:68:3: note: in expansion of macro 'BUILD_BUG_ON_MSG' 68 | BUILD_BUG_ON_MSG(__builtin_constant_p(_val) ? \ 115 | __BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \ | ^~~~~~~~~~~~~~~~ drivers/phy/st/phy-stm32-combophy.c:162:8: note: in expansion of macro 'FIELD_PREP' 162 | FIELD_PREP(STM32MP25_PCIEPRG_IMPCTRL_VSWING, vswing_of)); | ^~~~~~~~~~ Rework this so the field value gets set inside of the loop and otherwise set to zero. Fixes: 47e1bb6b4ba0 ("phy: stm32: Add support for STM32MP25 COMBOPHY.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20241111103712.3520611-1-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-04phy: qcom-qmp: Fix register name in RX Lane config of SC8280XPKrishna Kurapati
In RX Lane configuration sequence of SC8280XP, the register V5_RX_UCDR_FO_GAIN is incorrectly spelled as RX_UCDR_SO_GAIN and hence the programming sequence is wrong. Fix the register sequence accordingly to avoid any compliance failures. This has been tested on SA8775P by checking device mode enumeration in SuperSpeed. Cc: stable@vger.kernel.org Fixes: c0c7769cdae2 ("phy: qcom-qmp: Add SC8280XP USB3 UNI phy") Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20241112092831.4110942-1-quic_kriskura@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-04gpio: GPIO_MVEBU should not default to y when compile-testingGeert Uytterhoeven
Merely enabling compile-testing should not enable additional functionality. Fixes: 956ee0c5c969c9ca ("gpio: mvebu: allow building the module with COMPILE_TEST=y") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/6b9e55dbf544297d5acf743f6fa473791ab10644.1733242798.git.geert+renesas@glider.be Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-12-04RDMA/uverbs: Prevent integer overflow issueDan Carpenter
In the expression "cmd.wqe_size * cmd.wr_count", both variables are u32 values that come from the user so the multiplication can lead to integer wrapping. Then we pass the result to uverbs_request_next_ptr() which also could potentially wrap. The "cmd.sge_count * sizeof(struct ib_uverbs_sge)" multiplication can also overflow on 32bit systems although it's fine on 64bit systems. This patch does two things. First, I've re-arranged the condition in uverbs_request_next_ptr() so that the use controlled variable "len" is on one side of the comparison by itself without any math. Then I've modified all the callers to use size_mul() for the multiplications. Fixes: 67cdb40ca444 ("[IB] uverbs: Implement more commands") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/b8765ab3-c2da-4611-aae0-ddd6ba173d23@stanley.mountain Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-12-04phy: rockchip: naneng-combphy: fix phy resetChukun Pan
Currently, the USB port via combophy on the RK3528/RK3588 SoC is broken. usb usb8-port1: Cannot enable. Maybe the USB cable is bad? This is due to the combphy of RK3528/RK3588 SoC has multiple resets, but only "phy resets" need assert and deassert, "apb resets" don't need. So change the driver to only match the phy resets, which is also what the vendor kernel does. Fixes: 7160820d742a ("phy: rockchip: add naneng combo phy for RK3568") Cc: FUKAUMI Naoki <naoki@radxa.com> Cc: Michael Zimmermann <sigmaepsilon92@gmail.com> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://lore.kernel.org/r/20241122073006.99309-2-amadeus@jmu.edu.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-04phy: usb: Toggle the PHY power during initJustin Chen
When bringing up the PHY, it might be in a bad state if left powered. One case is we lose the PLL lock if the PLL is gated while the PHY is powered. Toggle the PHY power so we can start from a known state. Fixes: 4e5b9c9a73b3 ("phy: usb: Add support for new Synopsys USB controller on the 7216") Signed-off-by: Justin Chen <justin.chen@broadcom.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20241024213540.1059412-1-justin.chen@broadcom.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-04RDMA/bnxt_re: Remove always true dattr validity checkLeon Romanovsky
res->dattr is always valid at this point as it was initialized during device addition in bnxt_re_add_device(). This change is fixing the following smatch error: drivers/infiniband/hw/bnxt_re/qplib_fp.c:1090 bnxt_qplib_create_qp() error: we previously assumed 'res->dattr' could be null (see line 985) Fixes: 07f830ae4913 ("RDMA/bnxt_re: Adds MSN table capability for Gen P7 adapters") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202411222329.YTrwonWi-lkp@intel.com/ Link: https://patch.msgid.link/be0d8836b64cba3e479fbcbca717acad04aae02e.1732626579.git.leonro@nvidia.com Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2024-12-04spi: intel: Add Panther Lake SPI controller supportAapo Vienamo
The Panther Lake SPI controllers are compatible with the Cannon Lake controllers. Add support for following SPI controller device IDs: - H-series: 0xe323 - P-series: 0xe423 - U-series: 0xe423 Signed-off-by: Aapo Vienamo <aapo.vienamo@iki.fi> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://patch.msgid.link/20241204080208.1036537-1-mika.westerberg@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-12-04dmaengine: amd: qdma: Remove using the private get and set dma_ops APIsLizhi Hou
The get_dma_ops and set_dma_ops APIs were never for driver to use. Remove these calls from QDMA driver. Instead, pass the DMA device pointer from the qdma_platdata structure. Fixes: 73d5fc92a11c ("dmaengine: amd: qdma: Add AMD QDMA driver") Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240918181022.2155715-1-lizhi.hou@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-04net: sched: fix ordering of qlen adjustmentLion Ackermann
Changes to sch->q.qlen around qdisc_tree_reduce_backlog() need to happen _before_ a call to said function because otherwise it may fail to notify parent qdiscs when the child is about to become empty. Signed-off-by: Lion Ackermann <nnamrec@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-04dmaengine: apple-admac: Avoid accessing registers in probeSasha Finkelstein
The ADMAC attached to the AOP has complex power sequencing, and is power gated when the probe callback runs. Move the register reads to other functions, where we can guarantee that the hardware is switched on. Fixes: 568aa6dd641f ("dmaengine: apple-admac: Allocate cache SRAM to channels") Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com> Link: https://lore.kernel.org/r/20241124-admac-power-v1-1-58f2165a4d55@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-04linux/dmaengine.h: fix a few kernel-doc warningsRandy Dunlap
The comment block for "Interleaved Transfer Request" should not begin with "/**" since it is not in kernel-doc format. Fix doc name for enum sum_check_flags. Fix all (4) missing struct member warnings. Use "Warning:" for one "Note:" in enum dma_desc_metadata_mode since scripts/kernel-doc does not allow more than one Note: per function or identifier description. This leaves around 49 kernel-doc warnings like: include/linux/dmaengine.h:43: warning: Enum value 'DMA_OUT_OF_ORDER' not described in enum 'dma_status' and another scripts/kernel-doc problem with it not being able to parse some typedefs. Fixes: b14dab792dee ("DMAEngine: Define interleaved transfer request api") Fixes: ad283ea4a3ce ("async_tx: add sum check flags") Fixes: 272420214d26 ("dmaengine: Add DMA_CTRL_REUSE") Fixes: f067025bc676 ("dmaengine: add support to provide error result from a DMA transation") Fixes: d38a8c622a1b ("dmaengine: prepare for generic 'unmap' data") Fixes: 5878853fc938 ("dmaengine: Add API function dmaengine_prep_peripheral_dma_vec()") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Nuno Sa <nuno.sa@analog.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Link: https://lore.kernel.org/r/20241202172004.76020-1-rdunlap@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-04drm/i915/display: Use struct intel_display instead of struct drm_i915_privateMika Kahola
Let's start using struct intel_display instead of struct drm_i915_private when introducing new code. No functional changes. v2: Drop tc_to_intel_display() helper function (Jani) Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241127073200.124907-3-mika.kahola@intel.com
2024-12-04drm/i915/xe3lpd: Power request asserting/deassertingMika Kahola
There is a HW issue that arises when there are race conditions between TCSS entering/exiting TC7 or TC10 states while the driver is asserting/deasserting TCSS power request. As a workaround, Display driver will implement a mailbox sequence to ensure that the TCSS is in TC0 when TCSS power request is asserted/deasserted. The sequence is the following 1. Read mailbox command status and wait until run/busy bit is clear 2. Write mailbox data value '1' for power request asserting and '0' for power request deasserting 3. Write mailbox command run/busy bit and command value with 0x1 4. Read mailbox command and wait until run/busy bit is clear before continuing power request. v2: Rename WA function (Gustavo) Limit WA only for PTL platform with a TODO note (Gustavo) Add TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY for clarity when writing register data (Gustavo) Move register defs from i915_reg.h to intel_cx0_phy_regs.h (Gustavo) v3: Use "struct intel_display" instead of "struct drm_i915_private" (Jani) Move defs above C10 definitions in the intel_cx0_phy_regs.h file (Gustavo) Move drm_WARN_ON() inside WA function (Gustavo) Rename workaround function as wa_14020908590() (Gustvo) Use boolean enable instead of if-else structure (Raag) v4: Drop drm_WARN_ON() (Raag) Fix function definition to fit into a single line (Raag) v5: Drop TCSS_DISP_MAILBOX_IN_CMD_RUN_BUSY from TCSS_DISP_MAILBOX_IN_CMD_DATA(val) macro (Jani) Rename WA function with some meaningful name and add comment on WA number (Jani) Use struct intel_display on WA calling function (Jani) Reviewed-by: Raag Jadav <raag.jadav@intel.com> (v4) Acked-by: Jani Nikula <jani.nikula@intel.com> (v5) Signed-off-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241127073200.124907-2-mika.kahola@intel.com
2024-12-04drm/i915: Fix NULL pointer dereference in capture_engineEugene Kobyak
When the intel_context structure contains NULL, it raises a NULL pointer dereference error in drm_info(). Fixes: e8a3319c31a1 ("drm/i915: Allow error capture without a request") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12309 Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: <stable@vger.kernel.org> # v6.3+ Signed-off-by: Eugene Kobyak <eugene.kobyak@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/xmsgfynkhycw3cf56akp4he2ffg44vuratocsysaowbsnhutzi@augnqbm777at
2024-12-04drm/v3d: Add DRM_IOCTL_V3D_PERFMON_SET_GLOBALChristian Gmeiner
Add a new ioctl, DRM_IOCTL_V3D_PERFMON_SET_GLOBAL, to allow configuration of a global performance monitor (perfmon). Use the global perfmon for all jobs to ensure consistent performance tracking across submissions. This feature is needed to implement a Perfetto datasources in user-space. Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241202140615.74802-1-christian.gmeiner@gmail.com
2024-12-04Merge patch series "jbd2: two straightforward fixes"Christian Brauner
Two simple fixes for jdb2. * patches from https://lore.kernel.org/r/20241203014407.805916-1-yi.zhang@huaweicloud.com: jbd2: flush filesystem device before updating tail sequence jbd2: increase IO priority for writing revoke records Link: https://lore.kernel.org/r/20241203014407.805916-1-yi.zhang@huaweicloud.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-12-04jbd2: flush filesystem device before updating tail sequenceZhang Yi
When committing transaction in jbd2_journal_commit_transaction(), the disk caches for the filesystem device should be flushed before updating the journal tail sequence. However, this step is missed if the journal is not located on the filesystem device. As a result, the filesystem may become inconsistent following a power failure or system crash. Fix it by ensuring that the filesystem device is flushed appropriately. Fixes: 3339578f0578 ("jbd2: cleanup journal tail after transaction commit") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20241203014407.805916-3-yi.zhang@huaweicloud.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-12-04jbd2: increase IO priority for writing revoke recordsZhang Yi
Commit '6a3afb6ac6df ("jbd2: increase the journal IO's priority")' increases the priority of journal I/O by marking I/O with the JBD2_JOURNAL_REQ_FLAGS. However, that commit missed the revoke buffers, so also addresses that kind of I/Os. Fixes: 6a3afb6ac6df ("jbd2: increase the journal IO's priority") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20241203014407.805916-2-yi.zhang@huaweicloud.com Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-12-04net: sched: fix erspan_opt settings in cls_flowerXin Long
When matching erspan_opt in cls_flower, only the (version, dir, hwid) fields are relevant. However, in fl_set_erspan_opt() it initializes all bits of erspan_opt and its mask to 1. This inadvertently requires packets to match not only the (version, dir, hwid) fields but also the other fields that are unexpectedly set to 1. This patch resolves the issue by ensuring that only the (version, dir, hwid) fields are configured in fl_set_erspan_opt(), leaving the other fields to 0 in erspan_opt. Fixes: 79b1011cb33d ("net: sched: allow flower to match erspan options") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-12-04drm/xe/display: fix ttm_bo_access() usageMatthew Auld
ttm_bo_access() returns the size on success, account for that otherwise the caller incorrectly thinks this is an error in intel_atomic_prepare_plane_clear_colors(). v2 (Thomas) - Make sure we check for the partial copy case. Also since this api is easy to get wrong, wrap the whole thing in a new helper to hide the details and then convert the existing users over. Fixes: b6308aaa24a7 ("drm/xe/display: Update intel_bo_read_from_page to use ttm_bo_access") Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3661 Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241202170102.88893-2-matthew.auld@intel.com
2024-12-04firmware: arm_ffa: Fix the race around setting ffa_dev->propertiesLevi Yun
Currently, ffa_dev->properties is set after the ffa_device_register() call return in ffa_setup_partitions(). This could potentially result in a race where the partition's properties is accessed while probing struct ffa_device before it is set. Update the ffa_device_register() to receive ffa_partition_info so all the data from the partition information received from the firmware can be updated into the struct ffa_device before the calling device_register() in ffa_device_register(). Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration") Signed-off-by: Levi Yun <yeoreum.yun@arm.com> Message-Id: <20241203143109.1030514-2-yeoreum.yun@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-12-04drm/i915/cx0: split out mtl_get_cx0_buf_trans() to c10 and c20 variantsJani Nikula
The PHY is either c10 or c20, there's no need to check at runtime and complicate the conditions in mtl_get_cx0_buf_trans(). While at it, replace the direct port clock check with intel_dp_is_uhbr(). Cc: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241129114158.486418-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-12-03ethtool: Fix access to uninitialized fields in set RXNFC commandGal Pressman
The check for non-zero ring with RSS is only relevant for ETHTOOL_SRXCLSRLINS command, in other cases the check tries to access memory which was not initialized by the userspace tool. Only perform the check in case of ETHTOOL_SRXCLSRLINS. Without this patch, filter deletion (for example) could statistically result in a false error: # ethtool --config-ntuple eth3 delete 484 rmgr: Cannot delete RX class rule: Invalid argument Cannot delete classification rule Fixes: 9e43ad7a1ede ("net: ethtool: only allow set_rxnfc with rss + ring_cookie if driver opts in") Link: https://lore.kernel.org/netdev/871a9ecf-1e14-40dd-bbd7-e90c92f89d47@nvidia.com/ Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20241202164805.1637093-1-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-03Revert "udp: avoid calling sock_def_readable() if possible"Fernando Fernandez Mancera
This reverts commit 612b1c0dec5bc7367f90fc508448b8d0d7c05414. On a scenario with multiple threads blocking on a recvfrom(), we need to call sock_def_readable() on every __udp_enqueue_schedule_skb() otherwise the threads won't be woken up as __skb_wait_for_more_packets() is using prepare_to_wait_exclusive(). Link: https://bugzilla.redhat.com/2308477 Fixes: 612b1c0dec5b ("udp: avoid calling sock_def_readable() if possible") Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241202155620.1719-1-ffmancera@riseup.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-03net: Make napi_hash_lock irq safeJoe Damato
Make napi_hash_lock IRQ safe. It is used during the control path, and is taken and released in napi_hash_add and napi_hash_del, which will typically be called by calls to napi_enable and napi_disable. This change avoids a deadlock in pcnet32 (and other any other drivers which follow the same pattern): CPU 0: pcnet32_open spin_lock_irqsave(&lp->lock, ...) napi_enable napi_hash_add <- before this executes, CPU 1 proceeds spin_lock(napi_hash_lock) [...] spin_unlock_irqrestore(&lp->lock, flags); CPU 1: pcnet32_close napi_disable napi_hash_del spin_lock(napi_hash_lock) < INTERRUPT > pcnet32_interrupt spin_lock(lp->lock) <- DEADLOCK Changing the napi_hash_lock to be IRQ safe prevents the IRQ from firing on CPU 1 until napi_hash_lock is released, preventing the deadlock. Cc: stable@vger.kernel.org Fixes: 86e25f40aa1e ("net: napi: Add napi_config") Reported-by: Guenter Roeck <linux@roeck-us.net> Closes: https://lore.kernel.org/netdev/85dd4590-ea6b-427d-876a-1d8559c7ad82@roeck-us.net/ Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Joe Damato <jdamato@fastly.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241202182103.363038-1-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-03KVM: arm64: vgic-its: Add error handling in vgic_its_cache_translationKeisuke Nishimura
The return value of xa_store() needs to be checked. This fix adds an error handling path that resolves the kref inconsistency on failure. As suggested by Oliver Upton, this function does not return the error code intentionally because the translation cache is best effort. Fixes: 8201d1028caa ("KVM: arm64: vgic-its: Maintain a translation cache per ITS") Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr> Suggested-by: Oliver Upton <oliver.upton@linux.dev> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20241130144952.23729-1-keisuke.nishimura@inria.fr Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2024-12-03KVM: arm64: Do not allow ID_AA64MMFR0_EL1.ASIDbits to be overriddenMarc Zyngier
Catalin reports that a hypervisor lying to a guest about the size of the ASID field may result in unexpected issues: - if the underlying HW does only supports 8 bit ASIDs, the ASID field in a TLBI VAE1* operation is only 8 bits, and the HW will ignore the other 8 bits - if on the contrary the HW is 16 bit capable, the ASID field in the same TLBI operation is always 16 bits, irrespective of the value of TCR_ELx.AS. This could lead to missed invalidations if the guest was lead to assume that the HW had 8 bit ASIDs while they really are 16 bit wide. In order to avoid any potential disaster that would be hard to debug, prenent the migration between a host with 8 bit ASIDs to one with wider ASIDs (the converse was obviously always forbidden). This is also consistent with what we already do for VMIDs. If it becomes absolutely mandatory to support such a migration path in the future, we will have to trap and emulate all TLBIs, something that nobody should look forward to. Fixes: d5a32b60dc18 ("KVM: arm64: Allow userspace to change ID_AA64MMFR{0-2}_EL1") Reported-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Oliver Upton <oliver.upton@linux.dev> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20241203190236.505759-1-maz@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2024-12-03drm/amdgpu: rework resume handling for display (v2)Alex Deucher
Split resume into a 3rd step to handle displays when DCC is enabled on DCN 4.0.1. Move display after the buffer funcs have been re-enabled so that the GPU will do the move and properly set the DCC metadata for DCN. v2: fix fence irq resume ordering Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.11.x
2024-12-04Merge tag 'drm-misc-fixes-2024-11-28' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes Short summary of fixes pull: dma-buf: - Fix dma_fence_array_signaled() to ensure forward progress dp_mst: - Fix MST sideband message body length check sti: - Add __iomem for mixer_dbg_mxn()'s parameter Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20241128135958.GA244627@linux.fritz.box
2024-12-04Merge tag 'drm-misc-fixes-2024-11-21' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes Short summary of fixes pull: dma-fence: - Fix reference leak on fence-merge failure path - Simplify fence merging with kernel's sort() Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20241121131810.GA54208@linux.fritz.box
2024-12-03drm/msm/dpu: fix x1e80100 intf_6 underrun/vsync interruptStephan Gerhold
The IRQ indexes for the intf_6 underrun/vsync interrupts are swapped. DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 16) is the actual underrun interrupt and DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 17) is the vsync interrupt. This causes timeout errors when using the DP2 controller, e.g. [dpu error]enc37 frame done timeout *ERROR* irq timeout id=37, intf_mode=INTF_MODE_VIDEO intf=6 wb=-1, pp=2, intr=0 *ERROR* wait disable failed: id:37 intf:6 ret:-110 Correct them to fix these errors and make DP2 work properly. Cc: stable@vger.kernel.org Fixes: e3b1f369db5a ("drm/msm/dpu: Add X1E80100 support") Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/624681/ Link: https://lore.kernel.org/r/20241115-x1e80100-dp2-fix-v1-1-727b9fe6f390@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-12-03clk: en7523: Initialize num before accessing hws in en7523_register_clocks()Haoyu Li
With the new __counted_by annotation in clk_hw_onecell_data, the "num" struct member must be set before accessing the "hws" array. Failing to do so will trigger a runtime warning when enabling CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE. Fixes: f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") Signed-off-by: Haoyu Li <lihaoyu499@gmail.com> Link: https://lore.kernel.org/r/20241203142915.345523-1-lihaoyu499@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-12-03clk: en7523: Fix wrong BUS clock for EN7581Christian Marangi
The Documentation for EN7581 had a typo and still referenced the EN7523 BUS base source frequency. This was in conflict with a different page in the Documentration that state that the BUS runs at 300MHz (600MHz source with divisor set to 2) and the actual watchdog that tick at half the BUS clock (150MHz). This was verified with the watchdog by timing the seconds that the system takes to reboot (due too watchdog) and by operating on different values of the BUS divisor. The correct values for source of BUS clock are 600MHz and 540MHz. This was also confirmed by Airoha. Cc: stable@vger.kernel.org Fixes: 66bc47326ce2 ("clk: en7523: Add EN7581 support") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20241116105710.19748-1-ansuelsmth@gmail.com Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-12-03bcache: revert replacing IS_ERR_OR_NULL with IS_ERR againLiequan Che
Commit 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations") leads a NULL pointer deference in cache_set_flush(). 1721 if (!IS_ERR_OR_NULL(c->root)) 1722 list_add(&c->root->list, &c->btree_cache); >From the above code in cache_set_flush(), if previous registration code fails before allocating c->root, it is possible c->root is NULL as what it is initialized. __bch_btree_node_alloc() never returns NULL but c->root is possible to be NULL at above line 1721. This patch replaces IS_ERR() by IS_ERR_OR_NULL() to fix this. Fixes: 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations") Signed-off-by: Liequan Che <cheliequan@inspur.com> Cc: stable@vger.kernel.org Cc: Zheng Wang <zyytlz.wz@163.com> Reviewed-by: Mingzhe Zou <mingzhe.zou@easystack.cn> Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20241202115638.28957-1-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-12-03drm/xe/xe_guc_ads: Add nonpriv registers to write listJonathan Cavitt
When performing a guc_mmio_regset_write, we add all the registers in the reg_sr list to the save/restore list, but do not do the same for the nonpriv registers. Add them in. v2: - Add all NONPRIV registers to avoid undefined behavior (Harrison) - s/whitelist/nonpriv v3: - Rebase Closes: https://gitlab.freedesktop.org/drm/xe/kernel/issues/2249 Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com> CC: Lucas de Marchi <lucas.demarchi@intel.com> CC: Matt Roper <matthew.d.roper@intel.com> CC: John Harrison <john.c.harrison@intel.com> CC: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> CC: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241122180826.7075-1-jonathan.cavitt@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-12-03samples/bpf: Remove unnecessary -I flags from libbpf EXTRA_CFLAGSEduard Zingerman
Commit [0] breaks samples/bpf build: $ make M=samples/bpf ... make -C /path/to/kernel/samples/bpf/../../tools/lib/bpf \ ... EXTRA_CFLAGS=" \ ... -fsanitize=bounds \ -I/path/to/kernel/usr/include \ ... /path/to/kernel/samples/bpf/libbpf/libbpf.a install_headers CC /path/to/kernel/samples/bpf/libbpf/staticobjs/libbpf.o In file included from libbpf.c:29: /path/to/kernel/tools/include/linux/err.h:35:8: error: 'inline' can only appear on functions 35 | static inline void * __must_check ERR_PTR(long error_) | ^ The error is caused by `objtree` variable changing definition from `.` (dot) to an absolute path: - The variable TPROGS_CFLAGS is constructed as follows: ... TPROGS_CFLAGS += -I$(objtree)/usr/include - It is passed as EXTRA_CFLAGS for libbpf compilation: $(LIBBPF): ... ... $(MAKE) -C $(LIBBPF_SRC) RM='rm -rf' EXTRA_CFLAGS="$(TPROGS_CFLAGS)" - Before commit [0], the line passed to libbpf makefile was '-I./usr/include', where '.' referred to LIBBPF_SRC due to -C flag. The directory $(LIBBPF_SRC)/usr/include does not exist and thus was never resolved by C compiler. - After commit [0], the line passed to libbpf makefile became: '<output-dir>/usr/include', this directory exists and is resolved by C compiler. - Both 'tools/include' and 'usr/include' define files err.h and types.h. - libbpf expects headers like 'linux/err.h' and 'linux/types.h' defined in 'tools/include', not 'usr/include', hence the compilation error. This commit removes unnecessary -I flags from libbpf compilation. (libbpf sets up the necessary includes at lib/bpf/Makefile:63). Changes v1 [1] -> v2: - dropped unnecessary replacement of KBUILD_OUTPUT with $(objtree) (Andrii) Changes v2 [2] -> v3: - make sure --sysroot option is set for libbpf's EXTRA_CFLAGS, if $(SYSROOT) is set (Stanislav) [0] commit 13b25489b6f8 ("kbuild: change working directory to external module directory with M=") [1] https://lore.kernel.org/bpf/20241202212154.3174402-1-eddyz87@gmail.com/ [2] https://lore.kernel.org/bpf/20241202234741.3492084-1-eddyz87@gmail.com/ Fixes: 13b25489b6f8 ("kbuild: change working directory to external module directory with M=") Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://lore.kernel.org/bpf/20241203182222.3915763-1-eddyz87@gmail.com
generated by cgit (git 2.34.1) at 2025-09-24 10:35:29 +0000