| Age | Commit message (Collapse) | Author |
|---|
|
Add UAPI to provide set of flags for matching, where the flags
provided from user-space are mapped to flow-dissector flags.
The 1st flag allows to match on whether the packet is an
IP fragment and corresponds to the FLOW_DIS_IS_FRAGMENT flag.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These two statements were not indented correctly so it's sort of
confusing.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We never set "slots" in this function.
Fixes: a9380b0f7be8 ("drivers: net: xgene: Add support for Jumbo frame")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
test_and_set_bit() already implies a memory barrier.
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, icmp_rcv() always return zero on a packet delivery upcall.
To make its behavior more compliant with the way this API should be
used, this patch changes this to let it return NET_RX_SUCCESS when the
packet is proper handled, and NET_RX_DROP otherwise.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Marvell Armada 3700 SoC comprises an SPI Controller. This Controller
supports up to 4 SPI slave devices, with dedicated chip selects,supports
SPI mode 0/1/2 and 3, CPIO or Fifo mode with DMA transfers and different
SPI transfer mode (Single, Dual or Quad).
This commit adds basic driver support for FIFO mode. In this mode,
dedicated registers are used to store the instruction, the address, the
read mode and the data. Write and Read FIFO are used to store the
outcoming or incoming data. The data FIFOs are accessible via DMA or by
the CPU. Only the CPU is supported for now.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This adds the devicetree bindings documentation for the SPI controller
present in the Marvell Armada 3700 SoCs.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
qcom_smd_send() should return -EAGAIN for non-blocking channels with
insufficient space, so that we can propagate this event to user space.
Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Fix for bad memory access while disconnecting. netdev is freed before
private data free, and dev is accessed after freeing netdev.
This makes a slub problem, and it raise kernel oops with slub debugger
config.
Signed-off-by: Jiho Chu <jiho.chu@samsung.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Use the new API to create and destroy the "kvm-pit" kthread
worker. The API hides some implementation details.
In particular, kthread_create_worker() allocates and initializes
struct kthread_worker. It runs the kthread the right way
and stores task_struct into the worker structure.
kthread_destroy_worker() flushes all pending works, stops
the kthread and frees the structure.
This patch does not change the existing behavior except for
dynamically allocating struct kthread_worker and storing
only the pointer of this structure.
It is compile tested only because I did not find an easy
way how to run the code. Well, it should be pretty safe
given the nature of the change.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Message-Id: <1476877847-11217-1-git-send-email-pmladek@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- Expose all invalidation types to the L1
- Reject invvpid instruction, if L1 passed zero vpid value to single
context invalidations
Signed-off-by: Jan Dakinevich <jan.dakinevich@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This commit adds missing host CR3 checks. Before entering guest mode, the value
of CR3 is checked for reserved bits. After returning, nested_vmx_load_cr3 is
called to set the new CR3 value and check and load PDPTRs.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Loading CR3 as part of emulating vmentry is different from regular CR3 loads,
as implemented in kvm_set_cr3, in several ways.
* different rules are followed to check CR3 and it is desirable for the caller
to distinguish between the possible failures
* PDPTRs are not loaded if PAE paging and nested EPT are both enabled
* many MMU operations are not necessary
This patch introduces nested_vmx_load_cr3 suitable for CR3 loads as part of
nested vmentry and vmexit, and makes use of it on the nested vmentry path.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
It is possible that prepare_vmcs02 fails to load the guest state. This
patch adds the proper error handling for such a case. L1 will receive
an INVALID_STATE vmexit with the appropriate exit qualification if it
happens.
A failure to set guest CR3 is the only error propagated from prepare_vmcs02
at the moment.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
KVM does not correctly handle L1 hypervisors that emulate L2 real mode with
PAE and EPT, such as Hyper-V. In this mode, the L1 hypervisor populates guest
PDPTE VMCS fields and leaves guest CR3 uninitialized because it is not used
(see 26.3.2.4 Loading Page-Directory-Pointer-Table Entries). KVM always
dereferences CR3 and tries to load PDPTEs if PAE is on. This leads to two
related issues:
1) On the first nested vmentry, the guest PDPTEs, as populated by L1, are
overwritten in ept_load_pdptrs because the registers are believed to have
been loaded in load_pdptrs as part of kvm_set_cr3. This is incorrect. L2 is
running with PAE enabled but PDPTRs have been set up by L1.
2) When L2 is about to enable paging and loads its CR3, we, again, attempt
to load PDPTEs in load_pdptrs called from kvm_set_cr3. There are no guarantees
that this will succeed (it's just a CR3 load, paging is not enabled yet) and
if it doesn't, kvm_set_cr3 returns early without persisting the CR3 which is
then lost and L2 crashes right after it enables paging.
This patch replaces the kvm_set_cr3 call with a simple register write if PAE
and EPT are both on. CR3 is not to be interpreted in this case.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
vmx_set_cr0() modifies GUEST_EFER and "IA-32e mode guest" in the current
VMCS. Call vmx_set_efer() after vmx_set_cr0() so that emulated VM-entry
is more faithful to VMCS12.
This patch correctly causes VM-entry to fail when "IA-32e mode guest" is
1 and GUEST_CR0.PG is 0. Previously this configuration would succeed and
"IA-32e mode guest" would silently be disabled by KVM.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
MSR_IA32_CR{0,4}_FIXED1 define which bits in CR0 and CR4 are allowed to
be 1 during VMX operation. Since the set of allowed-1 bits is the same
in and out of VMX operation, we can generate these MSRs entirely from
the guest's CPUID. This lets userspace avoiding having to save/restore
these MSRs.
This patch also initializes MSR_IA32_CR{0,4}_FIXED1 from the CPU's MSRs
by default. This is a saner than the current default of -1ull, which
includes bits that the host CPU does not support.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
KVM emulates MSR_IA32_VMX_CR{0,4}_FIXED1 with the value -1ULL, meaning
all CR0 and CR4 bits are allowed to be 1 during VMX operation.
This does not match real hardware, which disallows the high 32 bits of
CR0 to be 1, and disallows reserved bits of CR4 to be 1 (including bits
which are defined in the SDM but missing according to CPUID). A guest
can induce a VM-entry failure by setting these bits in GUEST_CR0 and
GUEST_CR4, despite MSR_IA32_VMX_CR{0,4}_FIXED1 indicating they are
valid.
Since KVM has allowed all bits to be 1 in CR0 and CR4, the existing
checks on these registers do not verify must-be-0 bits. Fix these checks
to identify must-be-0 bits according to MSR_IA32_VMX_CR{0,4}_FIXED1.
This patch should introduce no change in behavior in KVM, since these
MSRs are still -1ULL.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
The VMX capability MSRs advertise the set of features the KVM virtual
CPU can support. This set of features varies across different host CPUs
and KVM versions. This patch aims to addresses both sources of
differences, allowing VMs to be migrated across CPUs and KVM versions
without guest-visible changes to these MSRs. Note that cross-KVM-
version migration is only supported from this point forward.
When the VMX capability MSRs are restored, they are audited to check
that the set of features advertised are a subset of what KVM and the
CPU support.
Since the VMX capability MSRs are read-only, they do not need to be on
the default MSR save/restore lists. The userspace hypervisor can set
the values of these MSRs or read them from KVM at VCPU creation time,
and restore the same value after every save/restore.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
The "non-true" VMX capability MSRs can be generated from their "true"
counterparts, by OR-ing the default1 bits. The default1 bits are fixed
and defined in the SDM.
Since we can generate the non-true VMX MSRs from the true versions,
there's no need to store both in struct nested_vmx. This also lets
userspace avoid having to restore the non-true MSRs.
Note this does not preclude emulating MSR_IA32_VMX_BASIC[55]=0. To do so,
we simply need to set all the default1 bits in the true MSRs (such that
the true MSRs and the generated non-true MSRs are equal).
Signed-off-by: David Matlack <dmatlack@google.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
The trap flag stays set until software clears it.
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
kvm_skip_emulated_instruction calls both
kvm_x86_ops->skip_emulated_instruction and kvm_vcpu_check_singlestep,
skipping the emulated instruction and generating a trap if necessary.
Replacing skip_emulated_instruction calls with
kvm_skip_emulated_instruction is straightforward, except for:
- ICEBP, which is already inside a trap, so avoid triggering another trap.
- Instructions that can trigger exits to userspace, such as the IO insns,
MOVs to CR8, and HALT. If kvm_skip_emulated_instruction does trigger a
KVM_GUESTDBG_SINGLESTEP exit, and the handling code for
IN/OUT/MOV CR8/HALT also triggers an exit to userspace, the latter will
take precedence. The singlestep will be triggered again on the next
instruction, which is the current behavior.
- Task switch instructions which would require additional handling (e.g.
the task switch bit) and are instead left alone.
- Cases where VMLAUNCH/VMRESUME do not proceed to the next instruction,
which do not trigger singlestep traps as mentioned previously.
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
We can't return both the pass/fail boolean for the vmcs and the upcoming
continue/exit-to-userspace boolean for skip_emulated_instruction out of
nested_vmx_check_vmcs, so move skip_emulated_instruction out of it instead.
Additionally, VMENTER/VMRESUME only trigger singlestep exceptions when
they advance the IP to the following instruction, not when they a) succeed,
b) fail MSR validation or c) throw an exception. Add a separate call to
skip_emulated_instruction that will later not be converted to the variant
that checks the singlestep flag.
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
The functions being moved ahead of skip_emulated_instruction here don't
need updated IPs, and skipping the emulated instruction at the end will
make it easier to return its value.
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Once skipping the emulated instruction can potentially trigger an exit to
userspace (via KVM_GUESTDBG_SINGLESTEP) kvm_emulate_cpuid will need to
propagate a return value.
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
Add a driver for the Cadence SD4HC SD/SDIO/eMMC Controller.
For SD, it basically relies on the SDHCI standard code.
For eMMC, this driver provides some callbacks to support the
hardware part that is specific to this IP design.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Some SDHCI-compat controllers support not only SD, but also eMMC,
but they use different commands for tuning: CMD19 for SD, CMD21 for
eMMC.
Due to the difference of the underlying mechanism, some controllers
(at least, the Cadence IP is the case) provide their own registers
for the eMMC tuning.
This commit will be useful when we want to override .execute_tuning
callback (for eMMC HS200 tuning), but still let it fall back to
sdhci_execute_tuning() for SD timing.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
kthread_create_on_cpu() sets KTHREAD_IS_PER_CPU and kthread->cpu, this
only makes sense if this kthread can be parked/unparked by cpuhp code.
kthread workers never call kthread_parkme() so this has no effect.
Change __kthread_create_worker() to simply call kthread_bind(task, cpu).
The very fact that kthread_create_on_cpu() doesn't accept a generic fmt
shows that it should not be used outside of smpboot.c.
Now, the only reason we can not unexport this helper and move it into
smpboot.c is that it sets kthread->cpu and struct kthread is not exported.
And the only reason we can not kill kthread->cpu is that kthread_unpark()
is used by drivers/gpu/drm/amd/scheduler/gpu_scheduler.c and thus we can
not turn _unpark into kthread_unpark(struct smp_hotplug_thread *, cpu).
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Chunming Zhou <David1.Zhou@amd.com>
Cc: Roman Pen <roman.penyaev@profitbricks.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20161129175110.GA5342@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Now that to_kthread() is always validm change kthread_park() and
kthread_unpark() to use it and kill to_live_kthread().
The conversion of kthread_unpark() is trivial. If KTHREAD_IS_PARKED is set
then the task has called complete(&self->parked) and there the function
cannot race against a concurrent kthread_stop() and exit.
kthread_park() is more tricky, because its semantics are not well
defined. It returns -ENOSYS if the thread exited but this can never happen
and as Roman pointed out kthread_park() can obviously block forever if it
would race with the exiting kthread.
The usage of kthread_park() in cpuhp code (cpu.c, smpboot.c, stop_machine.c)
is fine. It can never see an exiting/exited kthread, smpboot_destroy_threads()
clears *ht->store, smpboot_park_thread() checks it is not NULL under the same
smpboot_threads_lock. cpuhp_threads and cpu_stop_threads never exit, so other
callers are fine too.
But it has two more users:
- watchdog_park_threads():
The code is actually correct, get_online_cpus() ensures that
kthread_park() can't race with itself (note that kthread_park() can't
handle this race correctly), but it should not use kthread_park()
directly.
- drivers/gpu/drm/amd/scheduler/gpu_scheduler.c should not use
kthread_park() either.
kthread_park() must not be called after amd_sched_fini() which does
kthread_stop(), otherwise even to_live_kthread() is not safe because
task_struct can be already freed and sched->thread can point to nowhere.
The usage of kthread_park/unpark should either be restricted to core code
which is properly protected against the exit race or made more robust so it
is safe to use it in drivers.
To catch eventual exit issues, add a WARN_ON(PF_EXITING) for now.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chunming Zhou <David1.Zhou@amd.com>
Cc: Roman Pen <roman.penyaev@profitbricks.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20161129175107.GA5339@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
kthread_stop() had to use to_live_kthread() simply because it was not
possible to access kthread->exited after the exiting task clears
task_struct->vfork_done. Now that to_kthread() is always valid,
wake_up_process() + wait_for_completion() can be done
ununconditionally. It's not an issue anymore if the task has already issued
complete_vfork_done() or died.
The exiting task can get the spurious wakeup after mm_release() but this is
possible without this change too and is fine; do_task_dead() ensures that
this can't make any harm.
As a further enhancement this could be converted to task_work_add() later,
so ->vfork_done can be avoided completely.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chunming Zhou <David1.Zhou@amd.com>
Cc: Roman Pen <roman.penyaev@profitbricks.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20161129175103.GA5336@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
to_live_kthread() function"
This reverts commit 23196f2e5f5d810578a772785807dcdc2b9fdce9.
Now that struct kthread is kmalloc'ed and not longer on the task stack
there is no need anymore to pin the stack.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chunming Zhou <David1.Zhou@amd.com>
Cc: Roman Pen <roman.penyaev@profitbricks.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20161129175100.GA5333@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
commit 23196f2e5f5d "kthread: Pin the stack via try_get_task_stack() /
put_task_stack() in to_live_kthread() function" is a workaround for the
fragile design of struct kthread being allocated on the task stack.
struct kthread in its current form should be removed, but this needs
cleanups outside of kthread.c.
As a first step move struct kthread away from the task stack by making it
kmalloc'ed. This allows to access kthread.exited without the magic of
trying to pin task stack and the try logic in to_live_kthread().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chunming Zhou <David1.Zhou@amd.com>
Cc: Roman Pen <roman.penyaev@profitbricks.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20161129175057.GA5330@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This function sets req->r_locked_dir which is supposed to indicate to
ceph_fill_trace that the parent's i_rwsem is locked for write.
Unfortunately, there is no guarantee that the dir will be locked when
d_revalidate is called, so we really don't want ceph_fill_trace to do
any dcache manipulation from this context. Clear req->r_locked_dir since
it's clearly not safe to do that.
What we really want to know with d_revalidate is whether the dentry
still points to the same inode. ceph_fill_trace installs a pointer to
the inode in req->r_target_inode, so we can just compare that to
d_inode(dentry) to see if it's the same one after the lookup.
Also, since we aren't generally interested in the parent here, we can
switch to using a GETATTR to hint that to the MDS, which also means that
we only need to reserve one cap.
Finally, just remove the d_unhashed check. That's really outside the
purview of a filesystem's d_revalidate. If the thing became unhashed
while we're checking it, then that's up to the VFS to handle anyway.
Fixes: 200fd27c8fa2 ("ceph: use lookup request to revalidate dentry")
Link: http://tracker.ceph.com/issues/18041
Reported-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
In case the user provided insufficient data, the code may return
prematurely without any operation. In this case, the processed
data indicated with outlen is zero.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
tpd12s015 driver is missing error value handling for gpio
initialization, causing 0 to be returned as an error if gpiod_get_*
fails. This may cause deferred probing to fail.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
We set the possible_crtc for all planes to "(1 << priv->num_crtcs) - 1",
which is fine as the HW planes can be used fro all crtcs. However, when
we're doing that, we are still incrementing 'num_crtcs', and we'll end
up with bad possible_crtcs, preventing the use of the primary planes.
This patch passes a possible_crtcs mask to plane init function so that
we get correct possible_crtc.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
drm_universal_plane_init() and drm_plane_init() take "unsigned long
possible_crtcs" parameter, but then stuff it into uint32_t. Change the
parameter to uint32_t.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
|
|
The make variables asflags-y and ccflags-y are appended with -O2 and
$(LINUXINCLUDE). But the build already picks up -O2 from the top Makefile
and $(LINUXINCLUDE) from scripts/Makefile.lib. The net effect is that -O2
and the (long) list of include directories are used twice.
This is harmless but pointless. So stop appending to these flags.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
|
|
Currently the reference for the dmabuf->obj is incremented for the
dmabuf in drm_gem_prime_handle_to_fd() (at the high level userspace
interface), but is released in drm_gem_dmabuf_release() (the lowlevel
handler). Improve the symmetry of the dmabuf->obj ownership by acquiring
the reference in drm_gem_dmabuf_export(). This makes it easier to use
the prime functions directly.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Update kerneldoc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161207214527.22533-1-chris@chris-wilson.co.uk
|
|
Yu Zhao has noticed that __unregister_cpu_notifier only unregisters its
notifiers when HOTPLUG_CPU=y while the registration might succeed even
when HOTPLUG_CPU=n if MODULE is enabled. This means that e.g. zswap
might keep a stale notifier on the list on the manual clean up during
the pool tear down and thus corrupt the list. Resulting in the following
[ 144.964346] BUG: unable to handle kernel paging request at ffff880658a2be78
[ 144.971337] IP: [<ffffffffa290b00b>] raw_notifier_chain_register+0x1b/0x40
<snipped>
[ 145.122628] Call Trace:
[ 145.125086] [<ffffffffa28e5cf8>] __register_cpu_notifier+0x18/0x20
[ 145.131350] [<ffffffffa2a5dd73>] zswap_pool_create+0x273/0x400
[ 145.137268] [<ffffffffa2a5e0fc>] __zswap_param_set+0x1fc/0x300
[ 145.143188] [<ffffffffa2944c1d>] ? trace_hardirqs_on+0xd/0x10
[ 145.149018] [<ffffffffa2908798>] ? kernel_param_lock+0x28/0x30
[ 145.154940] [<ffffffffa2a3e8cf>] ? __might_fault+0x4f/0xa0
[ 145.160511] [<ffffffffa2a5e237>] zswap_compressor_param_set+0x17/0x20
[ 145.167035] [<ffffffffa2908d3c>] param_attr_store+0x5c/0xb0
[ 145.172694] [<ffffffffa290848d>] module_attr_store+0x1d/0x30
[ 145.178443] [<ffffffffa2b2b41f>] sysfs_kf_write+0x4f/0x70
[ 145.183925] [<ffffffffa2b2a5b9>] kernfs_fop_write+0x149/0x180
[ 145.189761] [<ffffffffa2a99248>] __vfs_write+0x18/0x40
[ 145.194982] [<ffffffffa2a9a412>] vfs_write+0xb2/0x1a0
[ 145.200122] [<ffffffffa2a9a732>] SyS_write+0x52/0xa0
[ 145.205177] [<ffffffffa2ff4d97>] entry_SYSCALL_64_fastpath+0x12/0x17
This can be even triggered manually by changing
/sys/module/zswap/parameters/compressor multiple times.
Fix this issue by making unregister APIs symmetric to the register so
there are no surprises.
Fixes: 47e627bc8c9a ("[PATCH] hotplug: Allow modules to use the cpu hotplug notifiers even if !CONFIG_HOTPLUG_CPU")
Reported-and-tested-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Link: http://lkml.kernel.org/r/20161207135438.4310-1-mhocko@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
vgem (and our igt tests using vgem) need this. I suspect etnaviv will
fare similarly.
v2. Make it build. Oops.
Fixes: d5264ed3823a ("drm: Return -ENOTSUPP when called for KMS cap with a non-KMS driver")
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161207144939.22756-1-daniel.vetter@ffwll.ch
|
|
Remove Tomi Valkeinen from fbdev maintainer and mark fbdev as orphan.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
The function is never called under PV guests, and only shows up
when MSI (or MSI-X) cannot be allocated. Convert the message
to include the error value.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Variable err is initialized with 0. As a result, the return value may
be 0 even if get_zeroed_page() fails to allocate memory. This patch fixes
the bug, initializing err with "-ENOMEM".
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Variable rc is reset in the loop, and its value will be non-negative
during the second and after repeat of the loop. If it fails to allocate
memory then, it may return a non-negative integer, which indicates no
error. This patch fixes the bug, assigning "-ENOMEM" to rc when
kzalloc() or alloc_page() returns NULL, and removing the initialization
of rc outside of the loop.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Bluetooth 5.0 introduces a new H7 key generation function that's used
when both sides of the pairing set the CT2 authentication flag to 1.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Drop duplicate header slab.h from btmrvl_drv.h.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
From firmware version 0.3 onwards we use the TX_ARET mode allowing for automatic
frame retransmissions. To actually make use of this feature we need to implement
the callback for setting the frame retries.
If the firmware version is to old print a warning and return with invalid value.
Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
With version 0.3 the atusb firmware offers an interface to read a permanent
EUI64 address from the devices EEPROM. This patch checks if the firmware is
new enough and tries to read out and use the address. If this does not work
we fall back to the original randomly generated address.
Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
