| Age | Commit message (Collapse) | Author |
|---|
|
Implement the helpers for the new write code in 9p. There's now an
optional ->prepare_write() that allows the filesystem to set the parameters
for the next write, such as maximum size and maximum segment count, and an
->issue_write() that is called to initiate an (asynchronous) write
operation.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: v9fs@lists.linux.dev
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Implement the helpers for the new write code in afs. There's now an
optional ->prepare_write() that allows the filesystem to set the parameters
for the next write, such as maximum size and maximum segment count, and an
->issue_write() that is called to initiate an (asynchronous) write
operation.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Add some write-side stats to count buffered writes, buffered writethrough,
and writepages calls.
Whilst we're at it, clean up the naming on some of the existing stats
counters and organise the output into two sets.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
The current netfslib writeback implementation creates writeback requests of
contiguous folio data and then separately tiles subrequests over the space
twice, once for the server and once for the cache. This creates a few
issues:
(1) Every time there's a discontiguity or a change between writing to only
one destination or writing to both, it must create a new request.
This makes it harder to do vectored writes.
(2) The folios don't have the writeback mark removed until the end of the
request - and a request could be hundreds of megabytes.
(3) In future, I want to support a larger cache granularity, which will
require aggregation of some folios that contain unmodified data (which
only need to go to the cache) and some which contain modifications
(which need to be uploaded and stored to the cache) - but, currently,
these are treated as discontiguous.
There's also a move to get everyone to use writeback_iter() to extract
writable folios from the pagecache. That said, currently writeback_iter()
has some issues that make it less than ideal:
(1) there's no way to cancel the iteration, even if you find a "temporary"
error that means the current folio and all subsequent folios are going
to fail;
(2) there's no way to filter the folios being written back - something
that will impact Ceph with it's ordered snap system;
(3) and if you get a folio you can't immediately deal with (say you need
to flush the preceding writes), you are left with a folio hanging in
the locked state for the duration, when really we should unlock it and
relock it later.
In this new implementation, I use writeback_iter() to pump folios,
progressively creating two parallel, but separate streams and cleaning up
the finished folios as the subrequests complete. Either or both streams
can contain gaps, and the subrequests in each stream can be of variable
size, don't need to align with each other and don't need to align with the
folios.
Indeed, subrequests can cross folio boundaries, may cover several folios or
a folio may be spanned by multiple folios, e.g.:
+---+---+-----+-----+---+----------+
Folios: | | | | | | |
+---+---+-----+-----+---+----------+
+------+------+ +----+----+
Upload: | | |.....| | |
+------+------+ +----+----+
+------+------+------+------+------+
Cache: | | | | | |
+------+------+------+------+------+
The progressive subrequest construction permits the algorithm to be
preparing both the next upload to the server and the next write to the
cache whilst the previous ones are already in progress. Throttling can be
applied to control the rate of production of subrequests - and, in any
case, we probably want to write them to the server in ascending order,
particularly if the file will be extended.
Content crypto can also be prepared at the same time as the subrequests and
run asynchronously, with the prepped requests being stalled until the
crypto catches up with them. This might also be useful for transport
crypto, but that happens at a lower layer, so probably would be harder to
pull off.
The algorithm is split into three parts:
(1) The issuer. This walks through the data, packaging it up, encrypting
it and creating subrequests. The part of this that generates
subrequests only deals with file positions and spans and so is usable
for DIO/unbuffered writes as well as buffered writes.
(2) The collector. This asynchronously collects completed subrequests,
unlocks folios, frees crypto buffers and performs any retries. This
runs in a work queue so that the issuer can return to the caller for
writeback (so that the VM can have its kswapd thread back) or async
writes.
(3) The retryer. This pauses the issuer, waits for all outstanding
subrequests to complete and then goes through the failed subrequests
to reissue them. This may involve reprepping them (with cifs, the
credits must be renegotiated, and a subrequest may need splitting),
and doing RMW for content crypto if there's a conflicting change on
the server.
[!] Note that some of the functions are prefixed with "new_" to avoid
clashes with existing functions. These will be renamed in a later patch
that cuts over to the new algorithm.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Switch to using unsigned long long rather than loff_t in netfslib to avoid
problems with the sign flipping in the maths when we're dealing with the
byte at position 0x7fffffffffffffff.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: netfs@lists.linux.dev
cc: ceph-devel@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
|
|
Export writeback_iter() so that it can be used by netfslib as a module.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: Christoph Hellwig <hch@lst.de>
cc: linux-mm@kvack.org
|
|
Use mempools for allocating requests and subrequests in an effort to make
sure that allocation always succeeds so that when performing writeback we
can always make progress.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Remove support for ->launder_folio() from netfslib and expect filesystems
to use filemap_invalidate_inode() instead. netfs_launder_folio() can then
be got rid of.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Steve French <sfrench@samba.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
cc: netfs@lists.linux.dev
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: ceph-devel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: devel@lists.orangefs.org
|
|
Use writepages-based flushing invalidation instead of
invalidate_inode_pages2() and ->launder_folio(). This will allow
->launder_folio() to be removed eventually.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-afs@lists.infradead.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Use writepages-based flushing invalidation instead of
invalidate_inode_pages2() and ->launder_folio(). This will allow
->launder_folio() to be removed eventually.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: v9fs@lists.linux.dev
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
|
|
Implement a replacement for launder_folio. The key feature of
invalidate_inode_pages2() is that it locks each folio individually, unmaps
it to prevent mmap'd accesses interfering and calls the ->launder_folio()
address_space op to flush it. This has problems: firstly, each folio is
written individually as one or more small writes; secondly, adjacent folios
cannot be added so easily into the laundry; thirdly, it's yet another op to
implement.
Instead, use the invalidate lock to cause anyone wanting to add a folio to
the inode to wait, then unmap all the folios if we have mmaps, then,
conditionally, use ->writepages() to flush any dirty data back and then
discard all pages.
The invalidate lock prevents ->read_iter(), ->write_iter() and faulting
through mmap all from adding pages for the duration.
This is then used from netfslib to handle the flusing in unbuffered and
direct writes.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Miklos Szeredi <miklos@szeredi.hu>
cc: Trond Myklebust <trond.myklebust@hammerspace.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Christian Brauner <brauner@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
cc: netfs@lists.linux.dev
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: ceph-devel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: devel@lists.orangefs.org
|
|
Viktor Malik says:
====================
libbpf: support "module:function" syntax for tracing programs
In some situations, it is useful to explicitly specify a kernel module
to search for a tracing program target (e.g. when a function of the same
name exists in multiple modules or in vmlinux).
This change enables that by allowing the "module:function" syntax for
the find_kernel_btf_id function. Thanks to this, the syntax can be used
both from a SEC macro (i.e. `SEC(fentry/module:function)`) and via the
bpf_program__set_attach_target API call.
---
Changes in v2:
- stylistic changes (suggested by Andrii)
- added Andrii's ack to the second patch
====================
Link: https://lore.kernel.org/r/cover.1714469650.git.vmalik@redhat.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
The previous patch added support for the "module:function" syntax for
tracing programs. This adds tests for explicitly specifying the module
name via the SEC macro and via the bpf_program__set_attach_target call.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8a076168ed847f7c8a6c25715737b1fea84e38be.1714469650.git.vmalik@redhat.com
|
|
In some situations, it is useful to explicitly specify a kernel module
to search for a tracing program target (e.g. when a function of the same
name exists in multiple modules or in vmlinux).
This patch enables that by allowing the "module:function" syntax for the
find_kernel_btf_id function. Thanks to this, the syntax can be used both
from a SEC macro (i.e. `SEC(fentry/module:function)`) and via the
bpf_program__set_attach_target API call.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/9085a8cb9a552de98e554deb22ff7e977d025440.1714469650.git.vmalik@redhat.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.9
This is much larger than is ideal, partly due to your holiday but also
due to several vendors having come in with relatively large fixes at
similar times. It's all driver specific stuff.
The meson fixes from Jerome fix some rare timing issues with blocking
operations happening in triggers, plus the continuous clock support
which fixes clocking for some platforms. The SOF series from Peter
builds to the fix to avoid spurious resets of ChainDMA which triggered
errors in cleanup paths with both PulseAudio and PipeWire, and there's
also some simple new debugfs files from Pierre which make support a lot
eaiser.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"There's a few simple driver specific fixes here, plus some core
cleanups from Matti which fix issues found with client drivers due to
the API being confusing.
The two fixes for the stubs provide more constructive behaviour with
!REGULATOR configurations, issues were noticed with some hwmon drivers
which would otherwise have needed confusing bodges in the users.
The irq_helpers fix to duplicate the provided name for the interrupt
controller was found because a driver got this wrong and it's again a
case where the core is the sensible place to put the fix"
* tag 'regulator-fix-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: change devm_regulator_get_enable_optional() stub to return Ok
regulator: change stubbed devm_regulator_get_enable to return Ok
regulator: vqmmc-ipq4019: fix module autoloading
regulator: qcom-refgen: fix module autoloading
regulator: mt6360: De-capitalize devicetree regulator subnodes
regulator: irq_helpers: duplicate IRQ name
|
|
Currently, if an automatically freed allocation is an error pointer that
will lead to a crash. An example of this is in wm831x_gpio_dbg_show().
171 char *label __free(kfree) = gpiochip_dup_line_label(chip, i);
172 if (IS_ERR(label)) {
173 dev_err(wm831x->dev, "Failed to duplicate label\n");
174 continue;
175 }
The auto clean up function should check for error pointers as well,
otherwise we're going to keep hitting issues like this.
Fixes: 54da6a092431 ("locking: Introduce __cleanup() based infrastructure")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Commit 284f17ac13fe ("mm/slub: handle bulk and single object freeing
separately") splits single and bulk object freeing in two functions
slab_free() and slab_free_bulk() which leads slab_free() to call
slab_free_hook() directly instead of slab_free_freelist_hook().
If `init_on_free` is set, slab_free_hook() zeroes the object.
Afterward, if `slub_debug=F` and `CONFIG_SLAB_FREELIST_HARDENED` are
set, the do_slab_free() slowpath executes freelist consistency
checks and try to decode a zeroed freepointer which leads to a
"Freepointer corrupt" detection in check_object().
During bulk free, slab_free_freelist_hook() isn't affected as it always
sets it objects freepointer using set_freepointer() to maintain its
reconstructed freelist after `init_on_free`.
For single free, object's freepointer thus needs to be avoided when
stored outside the object if `init_on_free` is set. The freepointer left
as is, check_object() may later detect an invalid pointer value due to
objects overflow.
To reproduce, set `slub_debug=FU init_on_free=1 log_level=7` on the
command line of a kernel build with `CONFIG_SLAB_FREELIST_HARDENED=y`.
dmesg sample log:
[ 10.708715] =============================================================================
[ 10.710323] BUG kmalloc-rnd-05-32 (Tainted: G B T ): Freepointer corrupt
[ 10.712695] -----------------------------------------------------------------------------
[ 10.712695]
[ 10.712695] Slab 0xffffd8bdc400d580 objects=32 used=4 fp=0xffff9d9a80356f80 flags=0x200000000000a00(workingset|slab|node=0|zone=2)
[ 10.716698] Object 0xffff9d9a80356600 @offset=1536 fp=0x7ee4f480ce0ecd7c
[ 10.716698]
[ 10.716698] Bytes b4 ffff9d9a803565f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 10.720703] Object ffff9d9a80356600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 10.720703] Object ffff9d9a80356610: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 10.724696] Padding ffff9d9a8035666c: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 10.724696] Padding ffff9d9a8035667c: 00 00 00 00 ....
[ 10.724696] FIX kmalloc-rnd-05-32: Object at 0xffff9d9a80356600 not freed
Fixes: 284f17ac13fe ("mm/slub: handle bulk and single object freeing separately")
Cc: <stable@vger.kernel.org>
Co-developed-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Nicolas Bouchinet <nicolas.bouchinet@ssi.gouv.fr>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
We flush the rebind worker during the vm close phase, however in places
like preempt_fence_work_func() we seem to queue the rebind worker
without first checking if the vm has already been closed. The concern
here is the vm being closed with the worker flushed, but then being
rearmed later, which looks like potential uaf, since there is no actual
refcounting to track the queued worker. We can't take the vm->lock here
in preempt_rebind_work_func() to first check if the vm is closed since
that will deadlock, so instead flush the worker again when the vm
refcount reaches zero.
v2:
- Grabbing vm->lock in the preempt worker creates a deadlock, so
checking the closed state is tricky. Instead flush the worker when
the refcount reaches zero. It should be impossible to queue the
preempt worker without already holding vm ref.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1676
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1591
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1364
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1304
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1249
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423074721.119633-4-matthew.auld@intel.com
(cherry picked from commit 3d44d67c441a9fe6f81a1d705f7de009a32a5b35)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
npcm7xx_cooling_device
In "struct npcm7xx_cooling_device", the 'pwm_clk_freq' field is only
written and never used.
Remove it and update npcm7xx_pwm_init() accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/2ff738663d40ac5ae3d0b4d2e688ff7e36032be8.1714505655.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In "struct npcm7xx_cooling_device", the 'fan_clk_freq' field is unused.
Remove it.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/74eee8aa739f94b8c6425ce3e37a427ca92243ea.1714505655.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In "struct stts751_priv", the 'smbus_timeout' field is unused.
Remove it.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/94ccf9caaa6b0101351bf381f09f4428c5e0835c.1714511322.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240430085654.1028864-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Since the value for PWMOUT Target Duty Cycle register is a 9 bit
left-justified value that ranges from 0 to 511 and is contained in 2
bytes.
There is an issue that the PWM signal recorded by oscilloscope would
not be on consistently if we set PWM to 100% to the driver.
It is because the LSB of the 9 bit would always be zero if it just
left shift 8 bit for the value that write to PWMOUT Target Duty
Cycle register.
Therefore, revise the scale of the value that was written to pwm input
from 255 to 511 and modify the value to left-justified value.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Link: https://lore.kernel.org/r/20240416022211.859483-1-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The LDO's Vout is adjustable if the hardware setting allows it,
and it can be set either 1800mv or 3300mv.
Additionally, the discharge register has been moved to another position.
Signed-off-by: Alina Yu <alina_yu@richtek.com>
Link: https://lore.kernel.org/r/5d56b79c94de63fc86b5a70b7e374da4240fee8b.1714467553.git.alina_yu@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The maximum ramp up and down range of BUCK are shorten
from 64mVstep/us to 16mVstep/us.
Therefore, the RTQ2208_RAMP_VALUE_MAX_uV is modified
to 16000uV in this version.
Signed-off-by: Alina Yu <alina_yu@richtek.com>
Link: https://lore.kernel.org/r/1777b18c0faa1f6b7196630e679a03362686c301.1714467553.git.alina_yu@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Define the code for checking conventional and sequential write required
zones suing the functions blk_revalidate_conv_zone() and
blk_revalidate_seq_zone() respectively. This simplifies the zone type
switch-case in blk_revalidate_zone_cb().
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240501110907.96950-15-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When BIOs plugged in a zone write plug are aborted,
blk_zone_wplug_bio_io_error() clears the BIO BIO_ZONE_WRITE_PLUGGING
flag so that bio_io_error(bio) does not end up calling
blk_zone_write_plug_bio_endio() and we thus need to manually drop the
reference on the zone write plug held by the aborted BIO.
Move the call to disk_put_zone_wplug() that is alwasy following the call
to blk_zone_wplug_bio_io_error() inside that function to simplify the
code.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-14-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We already have the disk variable obtained from the bio when calling
disk_get_zone_wplug(). So use that variable instead of dereferencing the
bio bdev again for the disk argument of disk_get_zone_wplug().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-13-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_zone_complete_request() must be called to handle the completion of a
zone write request handled with zone write plugging. This function is
called from blk_complete_request(), blk_update_request() and also in
blk_mq_submit_bio() error path. Improve this by moving this function
call into blk_mq_finish_request() as all requests are processed with
this function when they complete as well as when they are freed without
being executed. This also improves blk_update_request() used by scsi
devices as these may repeatedly call this function to handle partial
completions.
To be consistent with this change, blk_zone_complete_request() is
renamed to blk_zone_finish_request() and
blk_zone_write_plug_complete_request() is renamed to
blk_zone_write_plug_finish_request().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-12-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Improve blk_zone_write_plug_bio_merged() to check that we succefully get
a reference on the zone write plug of the merged BIO, as expected since
for a merge we already have at least one request and one BIO referencing
the zone write plug. Comments in this function are also improved to
better explain the references to the BIO zone write plug.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-11-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Zone write plugging ignores empty (no data) flush operations but handles
flush BIOs that have data to ensure that the flush machinery generated
write is processed in order. However, the call to
blk_zone_write_plug_attempt_merge() which sets a request
RQF_ZONE_WRITE_PLUGGING flag is called after blk_insert_flush(), thus
missing indicating that a non empty flush request completion needs
handling by zone write plugging.
Fix this by moving the call to blk_zone_write_plug_attempt_merge()
before blk_insert_flush(). And while at it, rename that function as
blk_zone_write_plug_init_request() to be clear that it is not just about
merging plugged BIOs in the request. While at it, also add a WARN_ONCE()
check that the zone write plug for the request is not NULL.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-10-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make sure that a request bio is not NULL before trying to restore the
request start sector.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: 6f8fd758de63 ("block: Restore sector of flush requests")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-9-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Large write BIOs that span a zone boundary are split in
blk_mq_submit_bio() before being passed to blk_zone_plug_bio() for zone
write plugging. Such split BIO will be chained with one fragment
targeting one zone and the remainder of the BIO targeting the next
zone. The two BIOs can be executed in parallel, without a predetermine
order relative to eachother and their completion may be reversed: the
remainder first completing and the first fragment then completing. In
such case, bio_endio() will not immediately execute
blk_zone_write_plug_bio_endio() for the parent BIO (the remainder of the
split BIO) as the BIOs are chained. blk_zone_write_plug_bio_endio() for
the parent BIO will be executed only once the first fragment completes.
In the case of a device with small zones and very large BIOs, uch
completion pattern can lead to disk_should_remove_zone_wplug() to return
true for the zone of the parent BIO when the parent BIO request
completes and blk_zone_write_plug_complete_request() is executed. This
triggers the removal of the zone write plug from the hash table using
disk_remove_zone_wplug(). With the zone write plug of the parent BIO
missing, the call to disk_get_zone_wplug() in
blk_zone_write_plug_bio_endio() returns NULL and triggers a warning.
This patterns can be recreated fairly easily using a scsi_debug device
with small zone and btrfs. E.g.
modprobe scsi_debug delay=0 dev_size_mb=1024 sector_size=4096 \
zbc=host-managed zone_cap_mb=3 zone_nr_conv=0 zone_size_mb=4
mkfs.btrfs -f -O zoned /dev/sda
mount -t btrfs /dev/sda /mnt
fio --name=wrtest --rw=randwrite --direct=1 --ioengine=libaio \
--bs=4k --iodepth=16 --size=1M --directory=/mnt --time_based \
--runtime=10
umount /dev/sda
Will result in the warning:
[ 29.035538] WARNING: CPU: 3 PID: 37 at block/blk-zoned.c:1207 blk_zone_write_plug_bio_endio+0xee/0x1e0
...
[ 29.058682] Call Trace:
[ 29.059095] <TASK>
[ 29.059473] ? __warn+0x80/0x120
[ 29.059983] ? blk_zone_write_plug_bio_endio+0xee/0x1e0
[ 29.060728] ? report_bug+0x160/0x190
[ 29.061283] ? handle_bug+0x36/0x70
[ 29.061830] ? exc_invalid_op+0x17/0x60
[ 29.062399] ? asm_exc_invalid_op+0x1a/0x20
[ 29.063025] ? blk_zone_write_plug_bio_endio+0xee/0x1e0
[ 29.063760] bio_endio+0xb7/0x150
[ 29.064280] btrfs_clone_write_end_io+0x2b/0x60 [btrfs]
[ 29.065049] blk_update_request+0x17c/0x500
[ 29.065666] scsi_end_request+0x27/0x1a0 [scsi_mod]
[ 29.066356] scsi_io_completion+0x5b/0x690 [scsi_mod]
[ 29.067077] blk_complete_reqs+0x3a/0x50
[ 29.067692] __do_softirq+0xcf/0x2b3
[ 29.068248] ? sort_range+0x20/0x20
[ 29.068791] run_ksoftirqd+0x1c/0x30
[ 29.069339] smpboot_thread_fn+0xcc/0x1b0
[ 29.069936] kthread+0xcf/0x100
[ 29.070438] ? kthread_complete_and_exit+0x20/0x20
[ 29.071314] ret_from_fork+0x31/0x50
[ 29.071873] ? kthread_complete_and_exit+0x20/0x20
[ 29.072563] ret_from_fork_asm+0x11/0x20
[ 29.073146] </TASK>
either when fio executes or when unmount is executed.
Fix this by modifying disk_should_remove_zone_wplug() to check that the
reference count to a zone write plug is not larger than 2, that is, that
the only references left on the zone are the caller held reference
(blk_zone_write_plug_complete_request()) and the initial extra reference
for the zone write plug taken when it was initialized (and that is
dropped when the zone write plug is removed from the hash table).
To be consistent with this change, make sure to drop the request or BIO
held reference to the zone write plug before calling
disk_zone_wplug_unplug_bio(). All references are also dropped using
disk_put_zone_wplug() instead of atomic_dec() to ensure that the zone
write plug is freed if it needs to be.
Comments are also improved to clarify zone write plugs reference
handling.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240501110907.96950-8-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix disk_remove_zone_wplug() to ensure that a zone write plug already
removed from a disk hash table of zone write plugs is not removed
again. Do this by checking the BLK_ZONE_WPLUG_UNHASHED flag of the plug
and calling hlist_del_init_rcu() only if the flag is not set.
Furthermore, since BIO completions can happen at any time, that is,
decrementing of the zone write plug reference count can happen at any
time, make sure to use disk_put_zone_wplug() instead of atomic_dec() to
ensure that the zone write plug is freed when its last reference is
dropped. In order to do this, disk_remove_zone_wplug() is moved after
the definition of disk_put_zone_wplug(). disk_should_remove_zone_wplug()
is moved as well to keep it together with disk_remove_zone_wplug().
To be consistent with this change, add a check in disk_put_zone_wplug()
to ensure that a zone write plug being freed was already removed from
the disk hash table.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-7-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since a zone write plug BIO work is a field of struct blk_zone_wplug, we
must ensure that a zone write plug is never freed when its BIO
submission work is queued or running. Do this by holding a reference on
the zone write plug when the submission work is scheduled for execution
with queue_work() and releasing the reference at the end of the
execution of the work function blk_zone_wplug_bio_work().
The helper function disk_zone_wplug_schedule_bio_work() is introduced to
get a reference on a zone write plug and queue its work. This helper is
used in disk_zone_wplug_unplug_bio() and disk_zone_wplug_handle_error().
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-6-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When zone is reset or finished, disk_zone_wplug_set_wp_offset() is
called to update the zone write plug write pointer offset and to clear
the zone error state (BLK_ZONE_WPLUG_ERROR flag) if it is set.
However, this processing is missing dropping the reference to the zone
write plug that was taken in disk_zone_wplug_set_error() when the error
flag was first set. Furthermore, the error state handling must release
the zone write plug lock to first execute a report zones command. When
the report zone races with a reset or finish operation that clears the
error, we can end up decrementing the zone write plug reference count
twice: once in disk_zone_wplug_set_wp_offset() for the reset/finish
operation and one more time in disk_zone_wplugs_work() once
disk_zone_wplug_handle_error() completes.
Fix this by introducing disk_zone_wplug_clear_error() as the symmetric
function of disk_zone_wplug_set_error(). disk_zone_wplug_clear_error()
decrements the zone write plug reference count obtained in
disk_zone_wplug_set_error() only if the error handling has not started
yet, that is, only if disk_zone_wplugs_work() has not yet taken the zone
write plug off the error list. This ensure that either
disk_zone_wplug_clear_error() or disk_zone_wplugs_work() drop the zone
write plug reference count.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-5-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When revalidating the zones of a zoned block device,
blk_revalidate_zone_cb() must allocate a zone write plug for any
sequential write required zone that is not empty nor full. However, the
current code tests the latter case by comparing the zone write pointer
offset to the zone size instead of the zone capacity. Furthermore,
disk_get_and_lock_zone_wplug() is called with a sector argument equal to
the zone start instead of the current zone write pointer position.
This commit fixes both issues by calling disk_get_and_lock_zone_wplug()
for a zone that is not empty and with a write pointer offset lower than
the zone capacity and use the zone capacity sector as the sector
argument for disk_get_and_lock_zone_wplug().
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For a device that has no limits for the maximum number of open and
active zones, we default to using the number of zones, limited to
BLK_ZONE_WPLUG_DEFAULT_POOL_SIZE (128), for the maximum number of open
zones indicated to the user. However, for a device that has conventional
zones and less zones than BLK_ZONE_WPLUG_DEFAULT_POOL_SIZE, we should
not account conventional zones and set the limit to the number of
sequential write required zones. Furthermore, for cases where the limit
is equal to the number of sequential write required zones, we can
advertize a limit of 0 to indicate "no limits".
Fix this by moving the zone write plug mempool resizing from
disk_revalidate_zone_resources() to disk_update_zone_resources() where
we can safely compute the number of conventional zones and update the
limits.
Fixes: 843283e96e5a ("block: Fake max open zones limit when there is no limit")
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240501110907.96950-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Using targets such as dm-linear, a mapped device can be created to
contain only conventional zones. Such device should not be treated as
zoned as it does not contain any mandatory sequential write required
zone. Since such device can be randomly written, we can modify
dm_set_zones_restrictions() to set the mapped device zoned queue limit
to false to expose it as a regular block device. The function
dm_check_zoned() does this after counting the number of conventional
zones of the mapped device and comparing it to the total number of zones
reported. The special dm_check_zoned_cb() report zones callback function
is used to count conventional zones.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Link: https://lore.kernel.org/r/20240501110907.96950-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge series from Wolfram Sang <wsa+renesas@sang-engineering.com>:
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_*() functions causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
obvious and self explaining.
This is part of a tree-wide series. The rest of the patches can be found here
(some parts may still be WIP):
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/time_left
Because these patches are generated, I audit them before sending. This is why I
will send series step by step. Build bot is happy with these patches, though.
No functional changes intended.
|
|
Merge series from Lorenzo Bianconi <lorenzo@kernel.org>:
Introduce support for SPI-NAND driver of the Airoha NAND Flash Interface
found on Airoha ARM EN7581 SoCs.
|
|
Panel replay was enabled by default in commit 5950efe25ee0
("drm/amd/display: Enable Panel Replay for static screen use case"), but
it isn't working properly at least on some BOE and AUO panels. Instead
of being static the screen is solid black when active. As it's a new
feature that was just introduced that regressed VRR disable it for now
so that problem can be properly root caused.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3344
Fixes: 5950efe25ee0 ("drm/amd/display: Enable Panel Replay for static screen use case")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix the output filenames of the combined device tree blobs generated by
applying *-csi2-dual-imx219-* overlays on the base dtbs during compile
test.
Fixes: f767eb918096 ("arm64: dts: ti: k3-j721e-sk: Add overlay for IMX219")
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/104fbdbc-a3f6-091a-72f4-17d4fa24ad92@ti.com/
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
'rcu-sync-normal-improve.2024.04.15a', 'rcu-tasks.2024.04.15a' and 'rcutorture.2024.04.15a' into rcu-merge.2024.04.15a
fixes.2024.04.15a: RCU fixes
misc.2024.04.12a: Miscellaneous fixes
rcu-sync-normal-improve.2024.04.15a: Improving synchronize_rcu() call
rcu-tasks.2024.04.15a: Tasks RCU updates
rcutorture.2024.04.15a: Torture-test updates
|
|
This is a followup of commit b5327b9a300e ("ipv6: use
call_rcu_hurry() in fib6_info_release()").
I had another pmtu.sh failure, and found another lazy
call_rcu() causing this failure.
aca_free_rcu() calls fib6_info_release() which releases
devices references.
We must not delay it too much or risk unregister_netdevice/ref_tracker
traces because references to netdev are not released in time.
This should speedup device/netns dismantles when CONFIG_RCU_LAZY=y
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become
invalid. Return NULL if such an skb is passed to skb_copy or
skb_copy_expand, in order to prevent a crash on a potential later
call to skb_gso_segment.
Fixes: 3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Calling skb_copy on a SKB_GSO_FRAGLIST skb is not valid, since it returns
an invalid linearized skb. This code only needs to change the ethernet
header, so pskb_copy is the right function to call here.
Fixes: 6db6f0eae605 ("bridge: multicast to unicast")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TLS requires a strict pdu pacing via MSG_EOR to signal the end
of a record and subsequent encryption. If we do not set MSG_EOR
at the end of a sequence the record won't be closed, encryption
doesn't start, and we end up with a send stall as the message
will never be passed on to the TCP layer.
So do not check for the queue status when TLS is enabled but
rather make the MSG_MORE setting dependent on the current
request only.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
If the user disabled a nvmet namespace, it is removed from the subsystem
namespaces list. When nvmet processes a command directed to an nsid that
was disabled, it cannot differentiate between a nsid that is disabled
vs. a non-existent namespace, and resorts to return NVME_SC_INVALID_NS
with the dnr bit set.
This translates to a non-retryable status for the host, which translates
to a user error. We should expect disabled namespaces to not cause an
I/O error in a multipath environment.
Address this by searching a configfs item for the namespace nvmet failed
to find, and if we found one, conclude that the namespace is disabled
(perhaps temporarily). Return NVME_SC_INTERNAL_PATH_ERROR in this case
and keep DNR bit cleared.
Reported-by: Jirong Feng <jirong.feng@easystack.cn>
Tested-by: Jirong Feng <jirong.feng@easystack.cn>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
