summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-09-30GFS2 fatal: filesystem consistency error on renameBob Peterson
This patch fixes a GFS2 problem whereby the first rename after a mount can result in a file system consistency error being flagged improperly and cause the file system to withdraw. The problem is that the rename code tries to run the rgrp list with function gfs2_blk2rgrpd before the rgrp list is guaranteed to be read in from disk. The patch makes the rename function hold the rindex glock (as the gfs2_unlink code does today) which reads in the rgrp list if need be. There were a total of three places in the rename code that improperly referenced the rgrp list without the rindex glock and this patch fixes all three. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-09-30Fix up more fallout form alpha signal cleanupsLinus Torvalds
Commit c52c2ddc1dfa ("alpha: switch osf_sigprocmask() to use of sigprocmask()") had several problems. The more obvious compile issues got fixed in commit 0f44fbd297e1 ("alpha: fix compile problem in arch/alpha/kernel/signal.c"), but it also caused a regression. Since _BLOCKABLE is already the set of signals that can be blocked, the code should do "newmask & _BLOCKABLE" rather than inverting _BLOCKABLE before masking. Reported-by: Michael Cree <mcree@orcon.net.nz> Patch-by: Al Viro <viro@zeniv.linux.org.uk> Patch-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-30Bluetooth: Fix deadlock in the ERTM logicGustavo F. Padovan
The Enhanced Retransmission Mode(ERTM) is a realiable mode of operation of the Bluetooth L2CAP layer. Think on it like a simplified version of TCP. The problem we were facing here was a deadlock. ERTM uses a backlog queue to queue incomimg packets while the user is helding the lock. At some moment the sk_sndbuf can be exceeded and we can't alloc new skbs then the code sleep with the lock to wait for memory, that stalls the ERTM connection once we can't read the acknowledgements packets in the backlog queue to free memory and make the allocation of outcoming skb successful. This patch actually affect all users of bt_skb_send_alloc(), i.e., all L2CAP modes and SCO. We are safe against socket states changes or channels deletion while the we are sleeping wait memory. Checking for the sk->sk_err and sk->sk_shutdown make the code safe, since any action that can leave the socket or the channel in a not usable state set one of the struct members at least. Then we can check both of them when getting the lock again and return with the proper error if something unexpected happens. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi>
2010-09-30Revert "Bluetooth: Don't accept ConfigReq if we aren't in the BT_CONFIG state"Gustavo F. Padovan
This reverts commit 8cb8e6f1684be13b51f8429b15f39c140326b327. That commit introduced a regression with the Bluetooth Profile Tuning Suite(PTS), Reverting this make sure that L2CAP is in a qualificable state. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-09-30Bluetooth: Fix inconsistent lock state with RFCOMMGustavo F. Padovan
When receiving a rfcomm connection with the old dund deamon a inconsistent lock state happens. That's because interrupts were already disabled by l2cap_conn_start() when rfcomm_sk_state_change() try to lock the spin_lock. As result we may have a inconsistent lock state for l2cap_conn_start() after rfcomm_sk_state_change() calls bh_lock_sock() and disable interrupts as well. [ 2833.151999] [ 2833.151999] ================================= [ 2833.151999] [ INFO: inconsistent lock state ] [ 2833.151999] 2.6.36-rc3 #2 [ 2833.151999] --------------------------------- [ 2833.151999] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 2833.151999] krfcommd/2306 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 2833.151999] (slock-AF_BLUETOOTH){+.?...}, at: [<ffffffffa00bcb56>] rfcomm_sk_state_change+0x46/0x170 [rfcomm] [ 2833.151999] {IN-SOFTIRQ-W} state was registered at: [ 2833.151999] [<ffffffff81094346>] __lock_acquire+0x5b6/0x1560 [ 2833.151999] [<ffffffff8109534a>] lock_acquire+0x5a/0x70 [ 2833.151999] [<ffffffff81392b6c>] _raw_spin_lock+0x2c/0x40 [ 2833.151999] [<ffffffffa00a5092>] l2cap_conn_start+0x92/0x640 [l2cap] [ 2833.151999] [<ffffffffa00a6a3f>] l2cap_sig_channel+0x6bf/0x1320 [l2cap] [ 2833.151999] [<ffffffffa00a9173>] l2cap_recv_frame+0x133/0x770 [l2cap] [ 2833.151999] [<ffffffffa00a997b>] l2cap_recv_acldata+0x1cb/0x390 [l2cap] [ 2833.151999] [<ffffffffa000db4b>] hci_rx_task+0x2ab/0x450 [bluetooth] [ 2833.151999] [<ffffffff8106b22b>] tasklet_action+0xcb/0xe0 [ 2833.151999] [<ffffffff8106b91e>] __do_softirq+0xae/0x150 [ 2833.151999] [<ffffffff8102bc0c>] call_softirq+0x1c/0x30 [ 2833.151999] [<ffffffff8102ddb5>] do_softirq+0x75/0xb0 [ 2833.151999] [<ffffffff8106b56d>] irq_exit+0x8d/0xa0 [ 2833.151999] [<ffffffff8104484b>] smp_apic_timer_interrupt+0x6b/0xa0 [ 2833.151999] [<ffffffff8102b6d3>] apic_timer_interrupt+0x13/0x20 [ 2833.151999] [<ffffffff81029dfa>] cpu_idle+0x5a/0xb0 [ 2833.151999] [<ffffffff81381ded>] rest_init+0xad/0xc0 [ 2833.151999] [<ffffffff817ebc4d>] start_kernel+0x2dd/0x2e8 [ 2833.151999] [<ffffffff817eb2e6>] x86_64_start_reservations+0xf6/0xfa [ 2833.151999] [<ffffffff817eb3ce>] x86_64_start_kernel+0xe4/0xeb [ 2833.151999] irq event stamp: 731 [ 2833.151999] hardirqs last enabled at (731): [<ffffffff8106b762>] local_bh_enable_ip+0x82/0xe0 [ 2833.151999] hardirqs last disabled at (729): [<ffffffff8106b93e>] __do_softirq+0xce/0x150 [ 2833.151999] softirqs last enabled at (730): [<ffffffff8106b96e>] __do_softirq+0xfe/0x150 [ 2833.151999] softirqs last disabled at (711): [<ffffffff8102bc0c>] call_softirq+0x1c/0x30 [ 2833.151999] [ 2833.151999] other info that might help us debug this: [ 2833.151999] 2 locks held by krfcommd/2306: [ 2833.151999] #0: (rfcomm_mutex){+.+.+.}, at: [<ffffffffa00bb744>] rfcomm_run+0x174/0xb20 [rfcomm] [ 2833.151999] #1: (&(&d->lock)->rlock){+.+...}, at: [<ffffffffa00b9223>] rfcomm_dlc_accept+0x53/0x100 [rfcomm] [ 2833.151999] [ 2833.151999] stack backtrace: [ 2833.151999] Pid: 2306, comm: krfcommd Tainted: G W 2.6.36-rc3 #2 [ 2833.151999] Call Trace: [ 2833.151999] [<ffffffff810928e1>] print_usage_bug+0x171/0x180 [ 2833.151999] [<ffffffff810936c3>] mark_lock+0x333/0x400 [ 2833.151999] [<ffffffff810943ca>] __lock_acquire+0x63a/0x1560 [ 2833.151999] [<ffffffff810948b5>] ? __lock_acquire+0xb25/0x1560 [ 2833.151999] [<ffffffff8109534a>] lock_acquire+0x5a/0x70 [ 2833.151999] [<ffffffffa00bcb56>] ? rfcomm_sk_state_change+0x46/0x170 [rfcomm] [ 2833.151999] [<ffffffff81392b6c>] _raw_spin_lock+0x2c/0x40 [ 2833.151999] [<ffffffffa00bcb56>] ? rfcomm_sk_state_change+0x46/0x170 [rfcomm] [ 2833.151999] [<ffffffffa00bcb56>] rfcomm_sk_state_change+0x46/0x170 [rfcomm] [ 2833.151999] [<ffffffffa00b9239>] rfcomm_dlc_accept+0x69/0x100 [rfcomm] [ 2833.151999] [<ffffffffa00b9a49>] rfcomm_check_accept+0x59/0xd0 [rfcomm] [ 2833.151999] [<ffffffffa00bacab>] rfcomm_recv_frame+0x9fb/0x1320 [rfcomm] [ 2833.151999] [<ffffffff813932bb>] ? _raw_spin_unlock_irqrestore+0x3b/0x60 [ 2833.151999] [<ffffffff81093acd>] ? trace_hardirqs_on_caller+0x13d/0x180 [ 2833.151999] [<ffffffff81093b1d>] ? trace_hardirqs_on+0xd/0x10 [ 2833.151999] [<ffffffffa00bb7f1>] rfcomm_run+0x221/0xb20 [rfcomm] [ 2833.151999] [<ffffffff813905e7>] ? schedule+0x287/0x780 [ 2833.151999] [<ffffffffa00bb5d0>] ? rfcomm_run+0x0/0xb20 [rfcomm] [ 2833.151999] [<ffffffff81081026>] kthread+0x96/0xa0 [ 2833.151999] [<ffffffff8102bb14>] kernel_thread_helper+0x4/0x10 [ 2833.151999] [<ffffffff813936bc>] ? restore_args+0x0/0x30 [ 2833.151999] [<ffffffff81080f90>] ? kthread+0x0/0xa0 [ 2833.151999] [<ffffffff8102bb10>] ? kernel_thread_helper+0x0/0x10 Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-09-30Bluetooth: Simplify L2CAP Streaming mode sendingGustavo F. Padovan
As we don't have any error control on the Streaming mode, i.e., we don't need to keep a copy of the skb for later resending we don't need to call skb_clone() on it. Then we can go one further here, and dequeue the skb before sending it, that also means we don't need to look to sk->sk_send_head anymore. The patch saves memory and time when sending Streaming mode data, so it is good to mainline. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-09-30Bluetooth: fix MTU L2CAP configuration parameterAndrei Emeltchenko
When receiving L2CAP negative configuration response with respect to MTU parameter we modify wrong field. MTU here means proposed value of MTU that the remote device intends to transmit. So for local L2CAP socket it is pi->imtu. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-09-30Bluetooth: Only enable L2CAP FCS for ERTM or streamingMat Martineau
This fixes a bug which caused the FCS setting to show L2CAP_FCS_CRC16 with L2CAP modes other than ERTM or streaming. At present, this only affects the FCS value shown with getsockopt() for basic mode. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-09-30of/i2c: Fix module load order issue caused by of_i2c.cGrant Likely
Commit 959e85f7, "i2c: add OF-style registration and binding" caused a module dependency loop where of_i2c.c calls functions in i2c-core, and i2c-core calls of_i2c_register_devices() in of_i2c. This means that when i2c support is built as a module when CONFIG_OF is set, then neither i2c_core nor of_i2c are able to be loaded. This patch fixes the problem by moving the of_i2c_register_devices() calls back into the device drivers. Device drivers already specifically request the core code to parse the device tree for devices anyway by setting the of_node pointer, so it isn't a big deal to also call the registration function. The drivers just become slightly more verbose. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-30i2c: Fix checks which cause legacy suspend to never get calledRajendra Nayak
For devices which are not adapted to runtime PM a call to pm_runtime_suspended always returns true. Hence the pm_runtime_suspended checks below prevent legacy suspend from getting called. So do a pm_runtime_suspended check only for devices with a dev_pm_ops populated (which hence do not rely on the legacy suspend.) Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-30i2c-pca: Fix waitforcompletion() return valueYegor Yefremov
ret is still -1, if during the polling read_byte() returns at once with I2C_PCA_CON_SI set. So ret > 0 would lead *_waitforcompletion() to return 0, in spite of the proper behavior. The routine was rewritten, so that ret has always a proper value, before returning. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Cc: stable@kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-30i2c: Fix for suspend/resume issueVishwanath BS
In current i2c core driver, call to pm_runtime_set_active from i2c_device_pm_resume will unconditionally enable i2c module and increment child count of the parent. Because of this, in CPU Idle path, i2c does not idle, preventing Core to enter retention. Also i2c module will not be suspended upon system suspend as pm_runtime_set_suspended is not called from i2c_device_pm_suspend. This issue is fixed by removing pm_runtime_set_active call from resume path which is not necessary. This fix has been tested on OMAP4430. Signed-off-by: Partha Basak <p-basak2@ti.com> Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-30i2c: Remove obsolete cleanup for clientdataWolfram Sang
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit. This is obsolete meanwhile, so fix it and hope the word will spread. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-09-30V4L/DVB: v4l: radio: si470x: fix unneeded free_irq() callMarek Szyprowski
In case of error during probe() the driver calls free_irq() function on not yet allocated irq. This patches fixes the call sequence in case of the error. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-30V4L/DVB: v4l: videobuf: prevent passing a NULL to dma_free_coherent()Pawel Osciak
When a driver that uses videobuf-dma-contig is used with the USERPTR memory access method a kernel oops might happen: a NULL address may be passed to dma_free_coherent(). This happens when an application calls REQBUFS and then exits without queuing any buffers. This patch fixes that bug. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-30V4L/DVB: ir-core: Fix null dereferences in the protocols sysfs interfaceBrian Rogers
For some cards, ir_dev->props and ir_dev->raw are both NULL. These cards are using built-in IR decoding instead of raw, and can't easily be made to switch protocols. So upon reading /sys/class/rc/rc?/protocols on such a card, return 'builtin' as the supported and enabled protocol. Return -EINVAL on any attempts to change the protocol. And most important of all, don't crash. Signed-off-by: Brian Rogers <brian@xyzw.org> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-30perf, x86: Handle in flight NMIs on P4 platformCyrill Gorcunov
Stephane reported we've forgot to guard the P4 platform against spurious in-flight performance IRQs. Fix it. This fixes potential spurious 'dazed and confused' NMI messages. Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: fweisbec@gmail.com Cc: peterz@infradead.org Cc: Robert Richter <robert.richter@amd.com> Cc: Lin Ming <ming.m.lin@intel.com> LKML-Reference: <1285815698-4298-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-30oprofile, ARM: Release resources on failureRobert Richter
This patch fixes a resource leak on failure, where the oprofilefs and some counters may not released properly. Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: <stable@kernel.org> # .35.x LKML-Reference: <20100929145225.GJ13563@erda.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-29Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2: Don't walk off the end of fast symlinks.
2010-09-30drm: i810/i830: fix locked ioctl variantArnd Bergmann
The i810 and i830 device drivers may replace their file operations on an open file descriptor. My previous patch to move the BKL out of the common DRM code into these drivers only caught the default file operations, not the ones that actually end up being used. Found while trying to come up with a way to kill the BKL for good in these drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-29Phonet: Correct header retrieval after pskb_may_pullKumar Sanghvi
Retrieve the header after doing pskb_may_pull since, pskb_may_pull could change the buffer structure. This is based on the comment given by Eric Dumazet on Phonet Pipe controller patch for a similar problem. Signed-off-by: Kumar Sanghvi <kumar.sanghvi@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-29um: Proper Fix for f25c80a4: remove duplicate structure field initializationBoaz Harrosh
uml_net_set_mac() was broken and luckily it was never used, before. What it was trying to do is spin_lock before memcopy the mac address. Linus attempted to fix it in assumption that someone decided the lock was needed. But since it was never ever used at all, and was just dead code, I think we can assume that it is not needed, after all. On the other hand patch [f25c80a4] was trying to use eth_mac_addr() in eth_configure(), *which was the real fallout*. Because of state checks done inside eth_mac_addr() the address was never set. I have not reintroduced the memcpy wrapper, but I've put a comment for future cats. The code now is back to exactly as it was before [f25c80a4]. With the cleanup applied. If the spin_lock is indeed needed then a contender should supply a test case that fails, then fix it with the proper locking, as a separate unrelated patch. CC: Julia Lawall <julia@diku.dk> CC: David S. Miller <davem@davemloft.net> CC: Andrew Morton <akpm@linux-foundation.org> CC: Al Viro <viro@ZenIV.linux.org.uk> Tested-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-29Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dmaengine: fix interrupt clearing for mv_xor missing inline keyword for static function in linux/dmaengine.h dma/shdma: move dereference below the NULL check
2010-09-29ocfs2: Don't walk off the end of fast symlinks.Joel Becker
ocfs2 fast symlinks are NUL terminated strings stored inline in the inode data area. However, disk corruption or a local attacker could, in theory, remove that NUL. Because we're using strlen() (my fault, introduced in a731d1 when removing vfs_follow_link()), we could walk off the end of that string. Signed-off-by: Joel Becker <joel.becker@oracle.com> Cc: stable@kernel.org
2010-09-29Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: force background CIL push under sustained load
2010-09-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Fix max8925 irq control bit incorrect setting mfd: Ignore non-GPIO IRQs when setting wm831x IRQ types
2010-09-29fix OMAP2 MTD build failureDaniel J Blueman
Fix build failure from recent interface change and merge. Tested on OMAP3430. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-29cifs: set backing_dev_info on new S_ISREG inodesJeff Layton
Testing on very recent kernel (2.6.36-rc6) made this warning pop: WARNING: at fs/fs-writeback.c:87 inode_to_bdi+0x65/0x70() Hardware name: Dirtiable inode bdi default != sb bdi cifs ...the following patch fixes it and seems to be the obviously correct thing to do for cifs. Cc: stable@kernel.org Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-29Merge branches 'apei', 'battery-mwh-fix', 'bugzilla-10807', ↵Len Brown
'bugzilla-14736', 'bugzilla-14679', 'bugzilla-16396', 'launchpad-613381' and 'misc' into release
2010-09-29ACPI: invoke DSDT corruption workaround on all Toshiba SatelliteLen Brown
Our list of Toshiba Satellite models that require this workaround is growing -- so invoke the workaround for the entire product line. https://bugzilla.kernel.org/show_bug.cgi?id=14679 Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-29ACPI, APEI, Fix ERST MOVE_DATA instruction implementationHuang Ying
The src_base and dst_base fields in apei_exec_context are physical address, so they should be ioremaped before being used in ERST MOVE_DATA instruction. Reported-by: Javier Martinez Canillas <martinez.javier@gmail.com> Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-29ACPI: fan: Fix more unbalanced code blockLuis Henriques
commit 934231de706d2579fae14f5857fcd8de991009ff fixes an unbalanced CONFIG_ACPI_PROCFS code block during module initialisation. This patch fixes similar issue but for the module exit. Signed-off-by: Luis Henriques <luis.henrix@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-29ACPI: acpi_pad: simplify code to avoid false gcc build warningLen Brown
acpi_pad.c:432: warning: ‘num_cpus’ may be used uninitialized in this function gcc 4.4.4 was unable to notice that num_cpus is always set. Re-arrange the code to un-confuse gcc, and also make it easier for humans to read.... Signed-off-by: Len Brown <len.browns@intel.com>
2010-09-29ACPI, APEI, Fix error path for memory allocationHuang Ying
In ERST debug/test support patch, a dynamic allocated buffer is used. The may-failed memory allocation should be tried firstly before free the previous buffer. APEI resource management memory allocation related error path is fixed too. v2: - Fix error messages for APEI resources management Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-29ACPI, APEI, HEST Fix the unsuitable usage of platform_dataJin Dongming
platform_data in hest_parse_ghes() is used for saving the address of entry information of erst_tab. When the device is failed to be added, platform_data will be freed by platform_device_put(). But the value saved in platform_data should not be freed here. If it is done, it will make system panic. So I think platform_data should save the address of allocated memory which saves entry information of erst_tab. This patch fixed it and I confirmed it on x86_64 next-tree. v2: Transport the pointer of hest_hdr to platform_data using platform_device_add_data() Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-29ACPI, APEI, Fix acpi_pre_map() return valueJin Dongming
After we ioremap() a new region, we call __acpi_try_ioremap() to see whether another thread has already mapped the same region. This check clobbers "vaddr", so compute the return value of acpi_pre_map() using the ioremap() result "map->vaddr" instead. v2: Modified the unsuitable description of patch. v3: Removed unlikely() check and made description simpler. Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-29ACPI, APEI, Fix APEI related table size checkingHuang Ying
On Huang Ying's machine: erst_tab->header_length == sizeof(struct acpi_table_einj) but Yinghai reported that on his machine, erst_tab->header_length == sizeof(struct acpi_table_einj) - sizeof(struct acpi_table_header) To make erst table size checking code works on all systems, both testing are treated as PASS. Same situation applies to einj_tab->header_length, so corresponding table size checking is changed in similar way too. v2: - Treat both table size as valid Originally-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-29pcmcia: add a few debug statementsDominik Brodowski
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: remove obsolete and wrong commentsDominik Brodowski
What's worse than no comment? A wrong comment. Several PCMCIA device drivers contained the same comments, which were based on how the PCMCIA subsystem worked in the old days of 2.4., and which were originally part of a "dummy_cs" driver. These comments no longer matched at all what is happening now, and therefore should be removed. Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: avoid messages on module (un)loadingDominik Brodowski
printk() statements on module load or unload are frowned upon. Also, add a few __init or __exit declarations. Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: move driver name to struct pcmcia_driverDominik Brodowski
Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: remove the "Finally, report what we've done" messageDominik Brodowski
Remove this unnecessary message -- this info is either available in sysfs or by enabling dynamic debug from the PCMCIA core. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-scsi@vger.kernel.org CC: linux-usb@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: use autoconfiguration feature for ioports and iomemDominik Brodowski
When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding fields in struct pcmcia_device *p_dev->resource[0,1,2] are set accordinly. Drivers wishing to override certain settings may do so in the callback function, but they no longer need to parse the CIS entries stored in cistpl_cftable_entry_t themselves. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: introduce autoconfiguration featureDominik Brodowski
Introduce an autoconfiguration feature to set certain values in pcmcia_loop_config(), instead of copying the same code over and over in each PCMCIA driver. At first, introduce the following options: CONF_AUTO_CHECK_VCC check or matching Vcc entry CONF_AUTO_SET_VPP set Vpp CONF_AUTO_AUDIO enable the speaker line CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: Documentation updateDominik Brodowski
Fill in missing descriptions and update some others for functions in pcmcia_resource.c. Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: convert pcmcia_request_configuration to pcmcia_enable_deviceDominik Brodowski
pcmcia_enable_device() now replaces pcmcia_request_configuration(). Instead of config_req_t, all necessary flags are either passed as a parameter to pcmcia_enable_device(), or (in rare circumstances) set in struct pcmcia_device -> flags. With the last remaining user of include/pcmcia/cs.h gone, remove all references. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: move config_{base,index,regs} to struct pcmcia_deviceDominik Brodowski
Several drivers prefer to explicitly set config_{base,index,regs}, formerly known as ConfigBase, ConfigIndex and Present. Instead of passing these values inside config_req_t, store it in struct pcmcia_device. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: simplify IntTypeDominik Brodowski
IntType was only set to INT_MEMORY (driver pcmciamtd) or INT_MEMORY_AND_IO (all other drivers). As this flags seems to relate to ioport access, make it conditional to the driver having requested IO port access. There are two drivers which do not request IO ports, but did set INT_MEMORY_AND_IO: ray_cs and b43. For those, we consistently only set INT_MEMORY in future. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: simplify Status, ExtStatus register accessDominik Brodowski
The Status (CISREG_CCSR) and ExtStatus (CISREG_ESR) registers were only accessed to enable audio output for some drivers and IRQ for serial_cs.c. The former also required setting config_req_t.Attributes to CONF_ENABLE_SPKR; the latter can be simplified to setting this field to CONF_ENABLE_ESR. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-09-29pcmcia: remove Pin, Copy configuration register accessDominik Brodowski
The "Pin" and "Copy" configuration registers (CISREG_SCR, CISREG_PPR) do not seem to be utilized anywhere. If a device would request a write to these registers, "0" would be written. Continue to do so, but warn of unexpected behavior -- and remove the "Pin" and "Copy" entries from config_req_t. Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
generated by cgit (git 2.34.1) at 2025-09-16 17:08:40 +0000