summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-27wlcore: Refactor probeIdo Yariv
Move most of the device-specific probe functionality into setup(), a new op. By doing this, wlcore_probe will be the first to request a firmware from userspace, making it easier to load the NVS file asynchronously. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: Allow memory access when the FW crashesIdo Yariv
When the no_recovery flag is used, the recovery work will not restart the FW and the state will not be set to 'on'. To enable post-mortem analysis, allow memory access in the 'restarting' state. Also, since the FW might not be operational, don't fail the read/write operations if elp_wakeup fails. Reported-by: Arkady Miasnikov <a-miasnikov@ti.com> Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: use dynamic keep-alive template idsEliad Peller
Currently, all the (station) roles use the same keep-alive template id (0). However, the klv template ids shouldn't be shared by different roles. Implement a simple klv_templates bitmap, and let each role allocate its own klv template id on role initialization. [Arik - remove invalidation of KLV template when getting into "idle". This is already handled in unjoin] Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: invalidate keep-alive template on disconnectionEliad Peller
Previously, invalidation of the keep-alive template was done when going idle. However, while removing the idle-handling we didn't move the keep-alive template invalidation to another place. This finally resulted in fw error when trying to use the keep-alive template by another role. (Note that we still have an error here - each role should have its unique keep-alive template id, while currently they all use CMD_TEMPL_KLV_IDX_NULL_DATA (0). This only works now because we don't support concurrent connected stations yet) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wl18xx: default to siso40 in 2.4ghz with a single antennaArik Nemtsov
The driver used siso20 in this case for legacy reasons. Reported-by: Ido Reis <idor@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: Fix unbalanced interrupts enablementIdo Yariv
The interrupt line is enabled by wl12xx_enable_interrupts and wl18xx_enable_interrupts, but it will not be disabled in all failure paths. Fix this. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: Don't recover during bootIdo Yariv
While recursive recovery is avoided during shutdown, a new recovery may be queued when the FW boots. The recovery work will then try to stop an already stopped hardware, which will most likely result in a kernel panic. Fix this by verifying that wl->state is on before queueing a new recovery. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore/wl18xx: add phy_fw_version_str to debugfs driver_stateYair Shapira
add phy_fw_version_str to debugfs driver_state file. information is taken during boot and stored in wl->chip.phy_fw_ver_str. Signed-off-by: Yair Shapira <yair.shapira@ti.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: spi: use private max-buf-size limitArik Nemtsov
Limit SPI transmissions to the wl12xx max buffer size, as only 12xx was tested with SPI. This allows us to remove the global aggregation buffer constant. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wl18xx: number_of_assembled_ant5 indicates if A band is enabledYair Shapira
Use number_of_assembled_ant5 phy param to indicate if A band is enabled: if number_of_assembled_ant5 != 0 then it is enabled otherwise it is disabled. This aligns with phy implementation that uses this param both to indicate if band is active and the number of antennas. This parameter replaces enable_11a module param that was removed. User-Space applications can use wlconf and/or INI files to disable A band using this parameter. Signed-off-by: Yair Shapira <yair.shapira@ti.com> Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: allow up to 3 running STA interfaces in combinationsArik Nemtsov
This allows us to have a p2p-management interface (in STA mode), as we as a group dedicated interface. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: lazy-enable device rolesEliad Peller
Enable device roles just before starting it. This way, a single device role should be enough for all vifs, as we can't use concurrent device roles (which require ROC) anyway. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: always use wlvif->role_id for scansEliad Peller
enabled (but not-started) sta role should be good enough for scanning (both normal and scheduled), so use it instead of the device_role. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: make debug prints work without dynamic debugArik Nemtsov
Make debug prints operational when dynamic debug is not defined. This allows better debugging in production environments. Change the driver prefix to "wlcore" while were at it. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore/wl18xx/wl12xx: allow up to 3 mac addressesArik Nemtsov
Allow 3 native mac addresses on 18xx. On 12xx allow 2 native mac addresses and set the LAA bit to create a third mac address. This enabled operation with a separate group interface. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: resume() only if sta is associatedEliad Peller
mac80211's resume() callback might get called even if the sta is not associated (but only up). The resume sequence in this case results in configuring the wake-up conditions of a non-started role, which causes fw assertion. Fix it by bailing out if the STA is not connected (like we do on suspend()). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: configure wowlan regardless of wakeup conditionsEyal Shapira
wowlan filters should be configured in any case in suspend/resume. This shouldn't be dependent on whether wakeup conditions are the same for suspend and resume states. Only the FW command to reconfigure wakeup conditions should be avoided in such a case. Reported-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore/wl18xx/wl12xx: aggregation buffer size setIgal Chernobelsky
Aggregation buffer size is set separately per 18xx/12xx chip family. For 18xx aggragation buffer is set to 13 pages to utilize all the available tx/rx descriptors for aggregation. [Arik - remove redundant parts from the patch] Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wl18xx/wl12xx: defines for Tx/Rx descriptors numIgal Chernobelsky
Use defines for number of Tx/Rx descriptors. Signed-off-by: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: tx_flush - optimize flow and force Tx during the flushArik Nemtsov
Force Tx during the flush if there are packets pending in the driver. This actually solves a bug where we would get called from the mac80211 wq context, which would prevent tx_work from getting queued, even when the mutex is unlocked. Don't stop the queues needlessly if there's nothing to flush. Use a larger delay when sleeping to give the driver a chance to flush and avoid cpu busy looping. Re-arrange the loop so the last iteration is not wasted. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: make Tx flush timings more verboseArik Nemtsov
Print how much time a flush took. This will help debug the time it takes to switch between channels. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: allow only the lowest OFDM rate for p2p setup framesArik Nemtsov
The IEEE80211_TX_CTL_NO_CCK_RATE flag is only set for mgmt packets transmitted during p2p connection setup. Make sure to use the lowest OFDM rate guarantee the peer always hears us. Change the p2p rate policy to contain only the 6mpbs rate to acheive this effect. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: AP mode - send non-data packets with basic ratesArik Nemtsov
This solves interoperability issues with peer that don't seem to "hear" management packets transmitted in higher rates. Based on a previous patch by Igal Chernobelsky. Cc: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: cancel recovery_work on stop() instead of remove_interface()Eliad Peller
recovery_work should be cancelled when stopping the device, not when removing an interface (this is probably a leftover from the single-role days) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wl18xx: increase rx_ba_win_size to 32Ido Reis
The new FWs support a bigger BA window. Signed-off-by: Ido Reis <idor@ti.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: Prevent interaction with HW after recovery is queuedIdo Yariv
When a function requests to recover, it would normally abort and will not send any additional commands to the HW. However, other threads may not be aware of the failure and could try to communicate with the HW after a recovery was queued, but before the recovery work began. Fix this by introducing an intermediate state which is set when recovery is queued, and modify all state checks accordingly. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: consider single fw caseEliad Peller
When a single fw is being used for both single-role and multi-role cases (e.g. 18xx), wl->mr_fw_name is NULL, which results in NULL dereference while trying to load the multi-role fw. In this case, always use the single-role fw, and avoid redundant fw switch by checking for this case in wl12xx_need_fw_change() as well. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wl18xx: update default phy configuration for pg2Ido Reis
default switch configuration set to pg2 chips (rdl 1/2/3/4). removed hacks for specific board types. pg1.x boards are now supported only using module params or specific conf files. Signed-off-by: Ido Reis <idor@ti.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wl12xx: remove duplicated include from main.cWei Yongjun
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: Declare MODULE_FIRMWARE usageTim Gardner
Declare any firmware that might be used by this driver. If all drivers declare their firmware usage, then a sufficiently complete list of firmware files can then be used to pare down the external linux-firmware package to just the files in actual use. Cc: Luciano Coelho <coelho@ti.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wl12xx: use module_platform_driverLuciano Coelho
Use a module_platform_driver declaration instead of replicating the init and exit functions in the driver. Based on the patch for wl18xx by Devendra Naga. Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27NFC: Fix sleeping in atomic when releasing socketSzymon Janc
nfc_llcp_socket_release is calling lock_sock/release_sock while holding write lock for rwlock. Use bh_lock/unlock_sock instead. BUG: sleeping function called from invalid context at net/core/sock.c:2138 in_atomic(): 1, irqs_disabled(): 0, pid: 56, name: kworker/1:1 4 locks held by kworker/1:1/56: Pid: 56, comm: kworker/1:1 Not tainted 3.5.0-999-nfc+ #7 Call Trace: [<ffffffff810952c5>] __might_sleep+0x145/0x200 [<ffffffff815d7686>] lock_sock_nested+0x36/0xa0 [<ffffffff81731569>] ? _raw_write_lock+0x49/0x50 [<ffffffffa04aa100>] ? nfc_llcp_socket_release+0x30/0x200 [nfc] [<ffffffffa04aa122>] nfc_llcp_socket_release+0x52/0x200 [nfc] [<ffffffffa04ab9f0>] nfc_llcp_mac_is_down+0x20/0x30 [nfc] [<ffffffffa04a6fea>] nfc_dep_link_down+0xaa/0xf0 [nfc] [<ffffffffa04a9bb5>] nfc_llcp_timeout_work+0x15/0x20 [nfc] [<ffffffff810825f7>] process_one_work+0x197/0x7c0 [<ffffffff81082596>] ? process_one_work+0x136/0x7c0 [<ffffffff8172fbc9>] ? __schedule+0x419/0x9c0 [<ffffffffa04a9ba0>] ? nfc_llcp_build_gb+0x1b0/0x1b0 [nfc] [<ffffffff81083090>] worker_thread+0x190/0x4c0 [<ffffffff81082f00>] ? rescuer_thread+0x2a0/0x2a0 [<ffffffff81088d1e>] kthread+0xae/0xc0 [<ffffffff810caafd>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8173acc4>] kernel_thread_helper+0x4/0x10 [<ffffffff81732174>] ? retint_restore_args+0x13/0x13 [<ffffffff81088c70>] ? flush_kthread_worker+0x150/0x150 [<ffffffff8173acc0>] ? gs_change+0x13/0x13 Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-27NFC: Fix sleeping in invalid context when netlink socket is closedSzymon Janc
netlink_register_notifier requires notify functions to not sleep. nfc_stop_poll locks device mutex and must not be called from notifier. Create workqueue that will handle this for all devices. BUG: sleeping function called from invalid context at kernel/mutex.c:269 in_atomic(): 0, irqs_disabled(): 0, pid: 4497, name: neard 1 lock held by neard/4497: Pid: 4497, comm: neard Not tainted 3.5.0-999-nfc+ #5 Call Trace: [<ffffffff810952c5>] __might_sleep+0x145/0x200 [<ffffffff81743dde>] mutex_lock_nested+0x2e/0x50 [<ffffffff816ffd19>] nfc_stop_poll+0x39/0xb0 [<ffffffff81700a17>] nfc_genl_rcv_nl_event+0x77/0xc0 [<ffffffff8174aa8c>] notifier_call_chain+0x5c/0x120 [<ffffffff8174abd6>] __atomic_notifier_call_chain+0x86/0x140 [<ffffffff8174ab50>] ? notifier_call_chain+0x120/0x120 [<ffffffff815e1347>] ? skb_dequeue+0x67/0x90 [<ffffffff8174aca6>] atomic_notifier_call_chain+0x16/0x20 [<ffffffff8162119a>] netlink_release+0x24a/0x280 [<ffffffff815d7aa8>] sock_release+0x28/0xa0 [<ffffffff815d7be7>] sock_close+0x17/0x30 [<ffffffff811b2a7c>] __fput+0xcc/0x250 [<ffffffff811b2c0e>] ____fput+0xe/0x10 [<ffffffff81085009>] task_work_run+0x69/0x90 [<ffffffff8101b951>] do_notify_resume+0x81/0xd0 [<ffffffff8174ef22>] int_signal+0x12/0x17 Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-27NFC: Add dummy nfc_llc_shdlc_register definitionJohn W. Linville
This is used when CONFIG_NFC_SHDLC is disabled. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-27NFC: LLCP raw socket supportThierry Escande
This adds support for socket of type SOCK_RAW to LLCP. sk_buff are copied and sent to raw sockets with a 2 bytes extra header: The first byte header contains the nfc adapter index. The second one contains flags: - 0x01 - Direction (0=RX, 1=TX) - 0x02-0x80 - Reserved A raw socket has to be explicitly bound to a nfc adapter. This is achieved by specifying the adapter index to be bound to in the dev_idx field of the sockaddr_nfc_llcp struct passed to bind(). Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-27NFC: Fix missing mutex unlock in pn533_send_cmd_frame_asyncSzymon Janc
If command allocation failed cmd_lock was not released and deadlock would occur. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-27NFC: Use dynamic initialization for rwlocksSzymon Janc
If rwlock is dynamically allocated but statically initialized it is missing proper lockdep annotation. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 3352, comm: neard Not tainted 3.5.0-999-nfc+ #2 Call Trace: [<ffffffff810c8526>] __lock_acquire+0x8f6/0x1bf0 [<ffffffff81739045>] ? printk+0x4d/0x4f [<ffffffff810c9eed>] lock_acquire+0x9d/0x220 [<ffffffff81702bfe>] ? nfc_llcp_sock_from_sn+0x4e/0x160 [<ffffffff81746724>] _raw_read_lock+0x44/0x60 [<ffffffff81702bfe>] ? nfc_llcp_sock_from_sn+0x4e/0x160 [<ffffffff81702bfe>] nfc_llcp_sock_from_sn+0x4e/0x160 [<ffffffff817034a7>] nfc_llcp_get_sdp_ssap+0xa7/0x1b0 [<ffffffff81706353>] llcp_sock_bind+0x173/0x210 [<ffffffff815d9c94>] sys_bind+0xe4/0x100 [<ffffffff8139209e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8174ea69>] system_call_fastpath+0x16/0x1b Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-27wl18xx: use module_platform_driverDevendra Naga
the driver's init and exit routines can be implemented with the module_platform_driver, as the init and exit code is same as that of the module_platform_driver Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Another spurious dmesg quitening. * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN
2012-09-27sparc64: Add SPARC-T4 optimized memcpy.David S. Miller
Before After -------------- -------------- bw_tcp: 1288.53 MB/sec 1637.77 MB/sec bw_pipe: 1517.18 MB/sec 2107.61 MB/sec bw_unix: 1838.38 MB/sec 2640.91 MB/sec make -s -j128 allmodconfig 5min 49sec 5min 31sec Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27Merge branch 'rcu/idle' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull the RCU adaptive-idle feature from Paul E. McKenney: "This series adds RCU APIs that allow non-idle tasks to enter RCU idle mode and provides x86 code to make use of them, allowing RCU to treat user-mode execution as an extended quiescent state when the new RCU_USER_QS kernel configuration parameter is specified. Work is in progress to port this to a few other architectures, but is not part of this series." Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-27perf/x86: Fix typo in uncore_pmu_to_boxYan, Zheng
The variable box should not be declared as static. This could probably cause crashes with sufficiently parallel uncore PMU use. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Cc: eranian@google.com Cc: a.p.zijlstra@chello.nl Link: http://lkml.kernel.org/r/1348709606-2759-1-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-26CIFS: Fix possible freed pointer dereference in CIFS_SessSetupPavel Shilovsky
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-26CIFS: Fix possible freed pointer dereference in SMB2_sess_setupPavel Shilovsky
and remove redundant (rsp == NULL) checks after SendReceive2. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-26CIFS: Make ops->close return voidPavel Shilovsky
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-27md/raid10: fix "enough" function for detecting if array is failed.NeilBrown
The 'enough' function is written to work with 'near' arrays only in that is implicitly assumes that the offset from one 'group' of devices to the next is the same as the number of copies. In reality it is the number of 'near' copies. So change it to make this number explicit. This bug makes it possible to run arrays without enough drives present, which is dangerous. It is appropriate for an -stable kernel, but will almost certainly need to be modified for some of them. Cc: stable@vger.kernel.org Reported-by: Jakub Husák <jakub@gooseman.cz> Signed-off-by: NeilBrown <neilb@suse.de>
2012-09-26ARM: Orion5x: Fix too small coherent pool.Andrew Lunn
Some Orion5x devices allocate their coherent buffers from atomic context. Increase size of atomic coherent pool to make sure such the allocations won't fail during boot. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-26perf hists: Add missing period_* fields when collapsing a hist entryNamhyung Kim
So that the perf report won't lost the cpu utilization information. For example, if there're two process that have same name. $ perf report --stdio --showcpuutilization -s pid [SNIP] # Overhead sys us Command: Pid # ........ ........ ........ ............. # 55.12% 0.01% 55.10% noploop:28781 44.88% 0.06% 44.83% noploop:28782 Before: $ perf report --stdio --showcpuutilization -s comm [SNIP] # Overhead sys us # ........ ........ ........ # 100.00% 0.06% 44.83% After: $ perf report --stdio --showcpuutilization -s comm [SNIP] # Overhead sys us # ........ ........ ........ # 100.00% 0.07% 99.93% Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Arun Sharma <asharma@fb.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1348645663-25303-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-26perf trace: New toolArnaldo Carvalho de Melo
Initially should look loosely like the venerable 'strace' tool, but using the infrastructure in the perf tools to allow tracing extra targets: [acme@sandy linux]$ perf trace --hell Error: unknown option `hell' usage: perf trace <PID> -p, --pid <pid> trace events on existing process id --tid <tid> trace events on existing thread id --all-cpus system-wide collection from all CPUs --cpu <cpu> list of cpus to monitor --no-inherit child tasks do not inherit counters --mmap-pages <n> number of mmap data pages --uid <user> user to profile [acme@sandy linux]$ Those should have the same semantics as when using with 'perf record'. It gets stuck sometimes, but hey, it works sometimes too! In time it should support perf.data based workloads, i.e. it should have a: -o filename Command line option that will produce a perf.data file that can then be used with 'perf trace' or any of the other perf tools (script, report, etc). It will also eventually have the set of functionalities described in the previous 'trace' prototype by Thomas Gleixner: "Announcing a new utility: 'trace'" http://lwn.net/Articles/415728/ Also planned is to have some of the features suggested in the comments of that LWN article. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-26perf evsel: Export the event_format constructorArnaldo Carvalho de Melo
It'll be needed in the next patches, where it'll be not associated directly to an evsel. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-16 14:18:34 +0000