summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-04-29net: dlink: Correct endianness handling of led_modeSimon Horman
As it's name suggests, parse_eeprom() parses EEPROM data. This is done by reading data, 16 bits at a time as follows: for (i = 0; i < 128; i++) ((__le16 *) sromdata)[i] = cpu_to_le16(read_eeprom(np, i)); sromdata is at the same memory location as psrom. And the type of psrom is a pointer to struct t_SROM. As can be seen in the loop above, data is stored in sromdata, and thus psrom, as 16-bit little-endian values. However, the integer fields of t_SROM are host byte order integers. And in the case of led_mode this leads to a little endian value being incorrectly treated as host byte order. Looking at rio_set_led_mode, this does appear to be a bug as that code masks led_mode with 0x1, 0x2 and 0x8. Logic that would be effected by a reversed byte order. This problem would only manifest on big endian hosts. Found by inspection while investigating a sparse warning regarding the crc field of t_SROM. I believe that warning is a false positive. And although I plan to send a follow-up to use little-endian types for other the integer fields of PSROM_t I do not believe that will involve any bug fixes. Compile tested only. Fixes: c3f45d322cbd ("dl2k: Add support for IP1000A-based cards") Signed-off-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250425-dlink-led-mode-v1-1-6bae3c36e736@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-29Merge tag 'fsnotify_for_v6.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify fix from Jan Kara: "A fix for the recently merged mount notification support" * tag 'fsnotify_for_v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: selftests/fs/mount-notify: test also remove/flush of mntns marks fanotify: fix flush of mntns marks
2025-04-29Merge tag 'platform-drivers-x86-v6.15-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers fixes from Ilpo Järvinen: "Fixes and new HW support - amd/pmc: Require at least 2.5 seconds between HW sleep cycles - alienware-wmi-wmax: - Add support for Alienware m15 R7 - Fix error handling to avoid uninitialized variable - asus-wmi: Disable OOBE state also on resume - ideapad-laptop: Support a few new buttons - intel/hid: Add Panther Lake support - intel-uncore-freq: Fix missing uncore sysfs during CPU hotplug" * tag 'platform-drivers-x86-v6.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: ideapad-laptop: add support for some new buttons platform/x86: asus-wmi: Disable OOBE state after resume from hibernation platform/x86: alienware-wmi-wmax: Add support for Alienware m15 R7 platform/x86/intel: hid: Add Pantherlake support platform/x86: alienware-wmi-wmax: Fix uninitialized variable due to bad error handling platform/x86/intel-uncore-freq: Fix missing uncore sysfs during CPU hotplug platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles
2025-04-29Merge tag 'fixes-2025-04-29' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock fixes from Mike Rapoport: "Fixes for nid setting in memmap_init_reserved_pages(): - pass 'size' rather than 'end' to memblock_set_node() as that function expects - fix a corner case when memblock.reserved is doubled at memmap_init_reserved_pages() and the newly reserved block won't have nid assigned" * tag 'fixes-2025-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock tests: add test for memblock_set_node mm/memblock: repeat setting reserved region nid if array is doubled mm/memblock: pass size instead of end to memblock_set_node()
2025-04-28Merge tag 'v6.15-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull smb server fixes from Steve French: - Fix three potential use after frees: in session logoff, in krb5 auth, and in RPC open - Fix missing rc check in session setup authentication * tag 'v6.15-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: fix use-after-free in session logoff ksmbd: fix use-after-free in kerberos authentication ksmbd: fix use-after-free in ksmbd_session_rpc_open smb: server: smb2pdu: check return value of xa_store()
2025-04-28Merge branch 'intel-net-queue-100GbE'Jakub Kicinski
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-04-22 (ice, idpf) For ice: Paul removes setting of ICE_AQ_FLAG_RD in ice_get_set_tx_topo() on E830 devices. Xuanqiang Luo adds error check for NULL VF VSI. For idpf: Madhu fixes misreporting of, currently, unsupported encapsulated packets. ==================== Link: https://patch.msgid.link/20250425222636.3188441-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-28idpf: fix offloads support for encapsulated packetsMadhu Chittim
Split offloads into csum, tso and other offloads so that tunneled packets do not by default have all the offloads enabled. Stateless offloads for encapsulated packets are not yet supported in firmware/software but in the driver we were setting the features same as non encapsulated features. Fixed naming to clarify CSUM bits are being checked for Tx. Inherit netdev features to VLAN interfaces as well. Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration") Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Madhu Chittim <madhu.chittim@intel.com> Tested-by: Zachary Goldstein <zachmgoldstein@google.com> Tested-by: Samuel Salin <Samuel.salin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250425222636.3188441-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-28ice: Check VF VSI Pointer Value in ice_vc_add_fdir_fltr()Xuanqiang Luo
As mentioned in the commit baeb705fd6a7 ("ice: always check VF VSI pointer values"), we need to perform a null pointer check on the return value of ice_get_vf_vsi() before using it. Fixes: 6ebbe97a4881 ("ice: Add a per-VF limit on number of FDIR filters") Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250425222636.3188441-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-28ice: fix Get Tx Topology AQ command error on E830Paul Greenwalt
The Get Tx Topology AQ command (opcode 0x0418) has different read flag requirements depending on the hardware/firmware. For E810, E822, and E823 firmware the read flag must be set, and for newer hardware (E825 and E830) it must not be set. This results in failure to configure Tx topology and the following warning message during probe: DDP package does not support Tx scheduling layers switching feature - please update to the latest DDP package and try again The current implementation only handles E825-C but not E830. It is confusing as we first check ice_is_e825c() and then set the flag in the set case. Finally, we check ice_is_e825c() again and set the flag for all other hardware in both the set and get case. Instead, notice that we always need the read flag for set, but only need the read flag for get on E810, E822, and E823 firmware. Fix the logic to check the MAC type and set the read flag in get only on the older devices which require it. Fixes: ba1124f58afd ("ice: Add E830 device IDs, MAC type and registers") Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250425222636.3188441-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-28Merge branch 'net_sched-adapt-qdiscs-for-reentrant-enqueue-cases'Jakub Kicinski
Victor Nogueira says: ==================== net_sched: Adapt qdiscs for reentrant enqueue cases As described in Gerrard's report [1], there are cases where netem can make the qdisc enqueue callback reentrant. Some qdiscs (drr, hfsc, ets, qfq) break whenever the enqueue callback has reentrant behaviour. This series addresses these issues by adding extra checks that cater for these reentrant corner cases. This series has passed all relevant test cases in the TDC suite. [1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/ ==================== Link: https://patch.msgid.link/20250425220710.3964791-1-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-28selftests: tc-testing: Add TDC tests that exercise reentrant enqueue behaviourVictor Nogueira
Add 5 TDC tests that exercise the reentrant enqueue behaviour in drr, ets, qfq, and hfsc: - Test DRR's enqueue reentrant behaviour with netem (which caused a double list add) - Test ETS's enqueue reentrant behaviour with netem (which caused a double list add) - Test QFQ's enqueue reentrant behaviour with netem (which caused a double list add) - Test HFSC's enqueue reentrant behaviour with netem (which caused a UAF) - Test nested DRR's enqueue reentrant behaviour with netem (which caused a double list add) Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20250425220710.3964791-6-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-28net_sched: qfq: Fix double list add in class with netem as child qdiscVictor Nogueira
As described in Gerrard's report [1], there are use cases where a netem child qdisc will make the parent qdisc's enqueue callback reentrant. In the case of qfq, there won't be a UAF, but the code will add the same classifier to the list twice, which will cause memory corruption. This patch checks whether the class was already added to the agg->active list (cl_is_active) before doing the addition to cater for the reentrant case. [1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/ Fixes: 37d9cf1a3ce3 ("sched: Fix detection of empty queues in child qdiscs") Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20250425220710.3964791-5-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-28net_sched: ets: Fix double list add in class with netem as child qdiscVictor Nogueira
As described in Gerrard's report [1], there are use cases where a netem child qdisc will make the parent qdisc's enqueue callback reentrant. In the case of ets, there won't be a UAF, but the code will add the same classifier to the list twice, which will cause memory corruption. In addition to checking for qlen being zero, this patch checks whether the class was already added to the active_list (cl_is_active) before doing the addition to cater for the reentrant case. [1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/ Fixes: 37d9cf1a3ce3 ("sched: Fix detection of empty queues in child qdiscs") Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20250425220710.3964791-4-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-28net_sched: hfsc: Fix a UAF vulnerability in class with netem as child qdiscVictor Nogueira
As described in Gerrard's report [1], we have a UAF case when an hfsc class has a netem child qdisc. The crux of the issue is that hfsc is assuming that checking for cl->qdisc->q.qlen == 0 guarantees that it hasn't inserted the class in the vttree or eltree (which is not true for the netem duplicate case). This patch checks the n_active class variable to make sure that the code won't insert the class in the vttree or eltree twice, catering for the reentrant case. [1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/ Fixes: 37d9cf1a3ce3 ("sched: Fix detection of empty queues in child qdiscs") Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20250425220710.3964791-3-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-28net_sched: drr: Fix double list add in class with netem as child qdiscVictor Nogueira
As described in Gerrard's report [1], there are use cases where a netem child qdisc will make the parent qdisc's enqueue callback reentrant. In the case of drr, there won't be a UAF, but the code will add the same classifier to the list twice, which will cause memory corruption. In addition to checking for qlen being zero, this patch checks whether the class was already added to the active_list (cl_is_active) before adding to the list to cover for the reentrant case. [1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/ Fixes: 37d9cf1a3ce3 ("sched: Fix detection of empty queues in child qdiscs") Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20250425220710.3964791-2-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-28pds_core: remove write-after-free of client_idShannon Nelson
A use-after-free error popped up in stress testing: [Mon Apr 21 21:21:33 2025] BUG: KFENCE: use-after-free write in pdsc_auxbus_dev_del+0xef/0x160 [pds_core] [Mon Apr 21 21:21:33 2025] Use-after-free write at 0x000000007013ecd1 (in kfence-#47): [Mon Apr 21 21:21:33 2025] pdsc_auxbus_dev_del+0xef/0x160 [pds_core] [Mon Apr 21 21:21:33 2025] pdsc_remove+0xc0/0x1b0 [pds_core] [Mon Apr 21 21:21:33 2025] pci_device_remove+0x24/0x70 [Mon Apr 21 21:21:33 2025] device_release_driver_internal+0x11f/0x180 [Mon Apr 21 21:21:33 2025] driver_detach+0x45/0x80 [Mon Apr 21 21:21:33 2025] bus_remove_driver+0x83/0xe0 [Mon Apr 21 21:21:33 2025] pci_unregister_driver+0x1a/0x80 The actual device uninit usually happens on a separate thread scheduled after this code runs, but there is no guarantee of order of thread execution, so this could be a problem. There's no actual need to clear the client_id at this point, so simply remove the offending code. Fixes: 10659034c622 ("pds_core: add the aux client API") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250425203857.71547-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-28Merge tag 'for-net-2025-04-25' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btmtksdio: Check function enabled before doing close - btmtksdio: Do close if SDIO card removed without close - btusb: avoid NULL pointer dereference in skb_dequeue() - btintel_pcie: Avoid redundant buffer allocation - btintel_pcie: Add additional to checks to clear TX/RX paths - hci_conn: Fix not setting conn_timeout for Broadcast Receiver - hci_conn: Fix not setting timeout for BIG Create Sync * tag 'for-net-2025-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: L2CAP: copy RX timestamp to new fragments Bluetooth: btintel_pcie: Add additional to checks to clear TX/RX paths Bluetooth: btmtksdio: Do close if SDIO card removed without close Bluetooth: btmtksdio: Check function enabled before doing close Bluetooth: btusb: avoid NULL pointer dereference in skb_dequeue() Bluetooth: btintel_pcie: Avoid redundant buffer allocation Bluetooth: hci_conn: Fix not setting timeout for BIG Create Sync Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver ==================== Link: https://patch.msgid.link/20250425192412.1578759-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-28netlink: specs: ethtool: Remove UAPI duplication of phy-upstream enumKory Maincent
The phy-upstream enum is already defined in the ethtool.h UAPI header and used by the ethtool userspace tool. However, the ethtool spec does not reference it, causing YNL to auto-generate a duplicate and redundant enum. Fix this by updating the spec to reference the existing UAPI enum in ethtool.h. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20250425171419.947352-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-28net: ethernet: mtk_eth_soc: sync mtk_clks_source_name arrayDaniel Golle
When removing the clock bits for clocks which aren't used by the Ethernet driver their names should also have been removed from the mtk_clks_source_name array. Remove them now as enum mtk_clks_map needs to match the mtk_clks_source_name array so the driver can make sure that all required clocks are present and correctly name missing clocks. Fixes: 887b1d1adb2e ("net: ethernet: mtk_eth_soc: drop clocks unused by Ethernet driver") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/d075e706ff1cebc07f9ec666736d0b32782fd487.1745555321.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-28amd-xgbe: Fix to ensure dependent features are toggled with RX checksum offloadVishal Badole
According to the XGMAC specification, enabling features such as Layer 3 and Layer 4 Packet Filtering, Split Header and Virtualized Network support automatically selects the IPC Full Checksum Offload Engine on the receive side. When RX checksum offload is disabled, these dependent features must also be disabled to prevent abnormal behavior caused by mismatched feature dependencies. Ensure that toggling RX checksum offload (disabling or enabling) properly disables or enables all dependent features, maintaining consistent and expected behavior in the network device. Cc: stable@vger.kernel.org Fixes: 1a510ccf5869 ("amd-xgbe: Add support for VXLAN offload capabilities") Signed-off-by: Vishal Badole <Vishal.Badole@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250424130248.428865-1-Vishal.Badole@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-28Merge tag 'for-6.15/dm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mikulas Patocka: - always update the array size in realloc_argv on success - dm-integrity: fix a warning on invalid table line - dm-bufio: don't schedule in atomic context - Fix W=1 build with clang * tag 'for-6.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: always update the array size in realloc_argv on success dm-integrity: fix a warning on invalid table line dm-bufio: don't schedule in atomic context dm table: Fix W=1 build warning when mempool_needs_integrity is unused
2025-04-28Merge tag 'powerpc-6.15-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Madhavan Srinivasan: - fix to handle patchable function entries during module load - fix to align vmemmap start to page size - fixes to handle compilation errors and warnings Thanks to Anthony Iliopoulos, Donet Tom, Ritesh Harjani (IBM), Venkat Rao Bagalkote, and Stephen Rothwell. * tag 'powerpc-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/boot: Fix dash warning powerpc/boot: Check for ld-option support powerpc: Add check to select PPC_RADIX_BROADCAST_TLBIE powerpc64/ftrace: fix module loading without patchable function entries book3s64/radix : Align section vmemmap start address to PAGE_SIZE book3s64/radix: Fix compile errors when CONFIG_ARCH_WANT_OPTIMIZE_DAX_VMEMMAP=n
2025-04-28Merge tag 'hyperv-fixes-signed-20250427' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Bug fixes for the Hyper-V driver and kvp_daemon * tag 'hyperv-fixes-signed-20250427' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: Fix bad ref to hv_synic_eventring_tail when CPU goes offline tools/hv: update route parsing in kvp daemon Drivers: hv: Fix bad pointer dereference in hv_get_partition_id
2025-04-28dm: always update the array size in realloc_argv on successBenjamin Marzinski
realloc_argv() was only updating the array size if it was called with old_argv already allocated. The first time it was called to create an argv array, it would allocate the array but return the array size as zero. dm_split_args() would think that it couldn't store any arguments in the array and would call realloc_argv() again, causing it to reallocate the initial slots (this time using GPF_KERNEL) and finally return a size. Aside from being wasteful, this could cause deadlocks on targets that need to process messages without starting new IO. Instead, realloc_argv should always update the allocated array size on success. Fixes: a0651926553c ("dm table: don't copy from a NULL pointer in realloc_argv()") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2025-04-27Linux 6.15-rc4v6.15-rc4Linus Torvalds
2025-04-26Merge tag 'pci-v6.15-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI fixes from Bjorn Helgaas: - When releasing a start-aligned resource, e.g., a bridge window, save start/end/flags for the next assignment attempt; fixes a v6.15-rc1 regression (Ilpo Järvinen) - Move set_pcie_speed.sh from TEST_PROGS to TEST_FILE; fixes a bwctrl selftest v6.15-rc1 regression (Ilpo Järvinen) - Add Manivannan Sadhasivam as maintainer of native host bridge and endpoint drivers (Manivannan Sadhasivam) - In endpoint test driver, defer IRQ allocation from .probe() until ioctl() to fix a regression on platforms where the Vendor/Device ID match doesn't include driver_data (Niklas Cassel) * tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE) MAINTAINERS: Move Manivannan Sadhasivam as PCI Native host bridge and endpoint maintainer selftests/pcie_bwctrl: Fix test progs list PCI: Restore assigned resources fully after release
2025-04-26Merge tag 'nfsd-6.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fix from Chuck Lever: - Revert a v6.15 patch due to a report of SELinux test failures * tag 'nfsd-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: Revert "sunrpc: clean cache_detail immediately when flush is written frequently"
2025-04-26Merge tag 'x86-urgent-2025-04-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 fixes from Ingo Molnar: - Fix 32-bit kernel boot crash if passed physical memory with more than 32 address bits - Fix Xen PV crash - Work around build bug in certain limited build environments - Fix CTEST instruction decoding in insn_decoder_test * tag 'x86-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/insn: Fix CTEST instruction decoding x86/boot: Work around broken busybox 'truncate' tool x86/mm: Fix _pgd_alloc() for Xen PV mode x86/e820: Discard high memory that can't be addressed by 32-bit systems
2025-04-26Merge tag 'sched-urgent-2025-04-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "Fix sporadic crashes in dequeue_entities() due to ... bad math. [ Arguably if pick_eevdf()/pick_next_entity() was less trusting of complex math being correct it could have de-escalated a crash into a warning, but that's for a different patch ]" * tag 'sched-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/eevdf: Fix se->slice being set to U64_MAX and resulting crash
2025-04-26Merge tag 'perf-urgent-2025-04-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc perf events fixes from Ingo Molnar: - Use POLLERR for events in error state, instead of the ambiguous POLLHUP error value - Fix non-sampling (counting) events on certain x86 platforms * tag 'perf-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix non-sampling (counting) events on certain x86 platforms perf/core: Change to POLLERR for pinned events with error
2025-04-26Merge tag 'irq-urgent-2025-04-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Ingo Molnar: "Fix crashes in the gic-v2m irqchip driver, caused by an incorrect __init annotation" * tag 'irq-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v2m: Prevent use after free of gicv2m_get_fwnode()
2025-04-26Merge tag 'loongarch-fixes-6.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Add a missing Kconfig option, fix some bugs in exception handlers, memory management and KVM" * tag 'loongarch-fixes-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: KVM: Fix PMU pass-through issue if VM exits to host finally LoongArch: KVM: Fully clear some CSRs when VM reboot LoongArch: KVM: Fix multiple typos of KVM code LoongArch: Return NULL from huge_pte_offset() for invalid PMD LoongArch: Remove a bogus reference to ZONE_DMA LoongArch: Handle fp, lsx, lasx and lbt assembly symbols LoongArch: Make do_xyz() exception handlers more robust LoongArch: Make regs_irqs_disabled() more clear LoongArch: Select ARCH_USE_MEMTEST
2025-04-26Merge tag 'for-linus' of https://github.com/openrisc/linuxLinus Torvalds
Pull OpenRISC updates from Stafford Horne: - Support for cacheinfo API to expose OpenRISC cache info via sysfs, this also translated to some cleanups to OpenRISC cache flush and invalidate API's - Documentation updates for new mailing list and toolchain binaries * tag 'for-linus' of https://github.com/openrisc/linux: Documentation: openrisc: Update toolchain binaries URL Documentation: openrisc: Update mailing list openrisc: Add cacheinfo support openrisc: Introduce new utility functions to flush and invalidate caches openrisc: Refactor struct cpuinfo_or1k to reduce duplication
2025-04-26Revert "sunrpc: clean cache_detail immediately when flush is written frequently"Chuck Lever
Ondrej reports that certain SELinux tests are failing after commit fc2a169c56de ("sunrpc: clean cache_detail immediately when flush is written frequently"), merged during the v6.15 merge window. Reported-by: Ondrej Mosnacek <omosnace@redhat.com> Fixes: fc2a169c56de ("sunrpc: clean cache_detail immediately when flush is written frequently") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2025-04-26Merge tag 'move-lib-kunit-v6.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kunit fix from Kees Cook: "A single fix for the kunit lib/tests/ relocation: - Ensure prime numbers tests are included in KUnit test runs (Mark Brown)" * tag 'move-lib-kunit-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lib: Ensure prime numbers tests are included in KUnit test runs
2025-04-26Merge tag 'drm-fixes-2025-04-26' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly drm fixes, mostly amdgpu, with some exynos cleanups and a couple of minor fixes, seems a bit quiet, but probably some lag from Easter holidays. amdgpu: - P2P DMA fixes - Display reset fixes - DCN 3.5 fixes - ACPI EDID fix - LTTPR fix - mode_valid() fix exynos: - fix spelling error - remove redundant error handling in exynos_drm_vidi.c module - marks struct decon_data as const in the exynos7_drm_decon driver since it is only read - Remove unnecessary checking in exynos_drm_drv.c module meson: - Fix VCLK calculation panel: - jd9365a: Fix reset polarity" * tag 'drm-fixes-2025-04-26' of https://gitlab.freedesktop.org/drm/kernel: drm/exynos: Fix spelling mistake "enqueu" -> "enqueue" drm/exynos: exynos7_drm_decon: Consstify struct decon_data drm/exynos: fixed a spelling error drm/exynos/vidi: Remove redundant error handling in vidi_get_modes() drm/exynos: Remove unnecessary checking drm/amd/display: do not copy invalid CRTC timing info drm/amd/display: Default IPS to RCG_IN_ACTIVE_IPS2_IN_OFF drm/amd/display: Use 16ms AUX read interval for LTTPR with old sinks drm/amd/display: Fix ACPI edid parsing on some Lenovo systems drm/amdgpu: Allow P2P access through XGMI drm/amd/display: Enable urgent latency adjustment on DCN35 drm/amd/display: Force full update in gpu reset drm/amd/display: Fix gpu reset in multidisplay config drm/amdgpu: Don't pin VRAM without DMABUF_MOVE_NOTIFY drm/amdgpu: Use allowed_domains for pinning dmabufs drm: panel: jd9365da: fix reset signal polarity in unprepare drm/meson: use unsigned long long / Hz for frequency types Revert "drm/meson: vclk: fix calculation of 59.94 fractional rates"
2025-04-26sched/eevdf: Fix se->slice being set to U64_MAX and resulting crashOmar Sandoval
There is a code path in dequeue_entities() that can set the slice of a sched_entity to U64_MAX, which sometimes results in a crash. The offending case is when dequeue_entities() is called to dequeue a delayed group entity, and then the entity's parent's dequeue is delayed. In that case: 1. In the if (entity_is_task(se)) else block at the beginning of dequeue_entities(), slice is set to cfs_rq_min_slice(group_cfs_rq(se)). If the entity was delayed, then it has no queued tasks, so cfs_rq_min_slice() returns U64_MAX. 2. The first for_each_sched_entity() loop dequeues the entity. 3. If the entity was its parent's only child, then the next iteration tries to dequeue the parent. 4. If the parent's dequeue needs to be delayed, then it breaks from the first for_each_sched_entity() loop _without updating slice_. 5. The second for_each_sched_entity() loop sets the parent's ->slice to the saved slice, which is still U64_MAX. This throws off subsequent calculations with potentially catastrophic results. A manifestation we saw in production was: 6. In update_entity_lag(), se->slice is used to calculate limit, which ends up as a huge negative number. 7. limit is used in se->vlag = clamp(vlag, -limit, limit). Because limit is negative, vlag > limit, so se->vlag is set to the same huge negative number. 8. In place_entity(), se->vlag is scaled, which overflows and results in another huge (positive or negative) number. 9. The adjusted lag is subtracted from se->vruntime, which increases or decreases se->vruntime by a huge number. 10. pick_eevdf() calls entity_eligible()/vruntime_eligible(), which incorrectly returns false because the vruntime is so far from the other vruntimes on the queue, causing the (vruntime - cfs_rq->min_vruntime) * load calulation to overflow. 11. Nothing appears to be eligible, so pick_eevdf() returns NULL. 12. pick_next_entity() tries to dereference the return value of pick_eevdf() and crashes. Dumping the cfs_rq states from the core dumps with drgn showed tell-tale huge vruntime ranges and bogus vlag values, and I also traced se->slice being set to U64_MAX on live systems (which was usually "benign" since the rest of the runqueue needed to be in a particular state to crash). Fix it in dequeue_entities() by always setting slice from the first non-empty cfs_rq. Fixes: aef6987d8954 ("sched/eevdf: Propagate min_slice up the cgroup hierarchy") Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/f0c2d1072be229e1bdddc73c0703919a8b00c652.1745570998.git.osandov@fb.com
2025-04-26irqchip/gic-v2m: Prevent use after free of gicv2m_get_fwnode()Suzuki K Poulose
With ACPI in place, gicv2m_get_fwnode() is registered with the pci subsystem as pci_msi_get_fwnode_cb(), which may get invoked at runtime during a PCI host bridge probe. But, the call back is wrongly marked as __init, causing it to be freed, while being registered with the PCI subsystem and could trigger: Unable to handle kernel paging request at virtual address ffff8000816c0400 gicv2m_get_fwnode+0x0/0x58 (P) pci_set_bus_msi_domain+0x74/0x88 pci_register_host_bridge+0x194/0x548 This is easily reproducible on a Juno board with ACPI boot. Retain the function for later use. Fixes: 0644b3daca28 ("irqchip/gic-v2m: acpi: Introducing GICv2m ACPI support") Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org
2025-04-25Merge branch 'net-ethernet-mtk-star-emac-fix-several-issues-on-rx-tx-poll'Jakub Kicinski
Louis-Alexis Eyraud says: ==================== net: ethernet: mtk-star-emac: fix several issues on rx/tx poll This patchset fixes two issues with the mtk-star-emac driver. The first patch fixes spin lock recursion issues I've observed on the Mediatek Genio 350-EVK board using this driver when the Ethernet functionality is enabled on the board (requires a correct jumper and DIP switch configuration, as well as enabling the device in the devicetree). The issues can be easily reproduced with apt install or ssh commands especially and with the CONFIG_DEBUG_SPINLOCK parameter, when one occurs, there is backtrace similar to this: ``` BUG: spinlock recursion on CPU#0, swapper/0/0 lock: 0xffff00000db9cf20, .magic: dead4ead, .owner: swapper/0/0, .owner_cpu: 0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.15.0-rc2-next-20250417-00001-gf6a27738686c-dirty #28 PREEMPT Hardware name: MediaTek MT8365 Open Platform EVK (DT) Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x60/0x80 dump_stack+0x18/0x24 spin_dump+0x78/0x88 do_raw_spin_lock+0x11c/0x120 _raw_spin_lock+0x20/0x2c mtk_star_handle_irq+0xc0/0x22c [mtk_star_emac] __handle_irq_event_percpu+0x48/0x140 handle_irq_event+0x4c/0xb0 handle_fasteoi_irq+0xa0/0x1bc handle_irq_desc+0x34/0x58 generic_handle_domain_irq+0x1c/0x28 gic_handle_irq+0x4c/0x120 do_interrupt_handler+0x50/0x84 el1_interrupt+0x34/0x68 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 regmap_mmio_read32le+0xc/0x20 (P) _regmap_bus_reg_read+0x6c/0xac _regmap_read+0x60/0xdc regmap_read+0x4c/0x80 mtk_star_rx_poll+0x2f4/0x39c [mtk_star_emac] __napi_poll+0x38/0x188 net_rx_action+0x164/0x2c0 handle_softirqs+0x100/0x244 __do_softirq+0x14/0x20 ____do_softirq+0x10/0x20 call_on_irq_stack+0x24/0x64 do_softirq_own_stack+0x1c/0x40 __irq_exit_rcu+0xd4/0x10c irq_exit_rcu+0x10/0x1c el1_interrupt+0x38/0x68 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 cpuidle_enter_state+0xac/0x320 (P) cpuidle_enter+0x38/0x50 do_idle+0x1e4/0x260 cpu_startup_entry+0x34/0x3c rest_init+0xdc/0xe0 console_on_rootfs+0x0/0x6c __primary_switched+0x88/0x90 ``` The second patch is a cleanup patch to fix a inconsistency in the mtk_star_rx_poll function between the napi_complete_done api usage and its description in documentation. I've tested this patchset on Mediatek Genio 350-EVK board with a kernel based on linux-next (tag: next-20250422). v1: https://lore.kernel.org/20250422-mtk_star_emac-fix-spinlock-recursion-issue-v1-0-1e94ea430360@collabora.com ==================== Link: https://patch.msgid.link/20250424-mtk_star_emac-fix-spinlock-recursion-issue-v2-0-f3fde2e529d8@collabora.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-25net: ethernet: mtk-star-emac: rearm interrupts in rx_poll only when advisedLouis-Alexis Eyraud
In mtk_star_rx_poll function, on event processing completion, the mtk_star_emac driver calls napi_complete_done but ignores its return code and enable RX DMA interrupts inconditionally. This return code gives the info if a device should avoid rearming its interrupts or not, so fix this behaviour by taking it into account. Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver") Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://patch.msgid.link/20250424-mtk_star_emac-fix-spinlock-recursion-issue-v2-2-f3fde2e529d8@collabora.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-25net: ethernet: mtk-star-emac: fix spinlock recursion issues on rx/tx pollLouis-Alexis Eyraud
Use spin_lock_irqsave and spin_unlock_irqrestore instead of spin_lock and spin_unlock in mtk_star_emac driver to avoid spinlock recursion occurrence that can happen when enabling the DMA interrupts again in rx/tx poll. ``` BUG: spinlock recursion on CPU#0, swapper/0/0 lock: 0xffff00000db9cf20, .magic: dead4ead, .owner: swapper/0/0, .owner_cpu: 0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.15.0-rc2-next-20250417-00001-gf6a27738686c-dirty #28 PREEMPT Hardware name: MediaTek MT8365 Open Platform EVK (DT) Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x60/0x80 dump_stack+0x18/0x24 spin_dump+0x78/0x88 do_raw_spin_lock+0x11c/0x120 _raw_spin_lock+0x20/0x2c mtk_star_handle_irq+0xc0/0x22c [mtk_star_emac] __handle_irq_event_percpu+0x48/0x140 handle_irq_event+0x4c/0xb0 handle_fasteoi_irq+0xa0/0x1bc handle_irq_desc+0x34/0x58 generic_handle_domain_irq+0x1c/0x28 gic_handle_irq+0x4c/0x120 do_interrupt_handler+0x50/0x84 el1_interrupt+0x34/0x68 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 regmap_mmio_read32le+0xc/0x20 (P) _regmap_bus_reg_read+0x6c/0xac _regmap_read+0x60/0xdc regmap_read+0x4c/0x80 mtk_star_rx_poll+0x2f4/0x39c [mtk_star_emac] __napi_poll+0x38/0x188 net_rx_action+0x164/0x2c0 handle_softirqs+0x100/0x244 __do_softirq+0x14/0x20 ____do_softirq+0x10/0x20 call_on_irq_stack+0x24/0x64 do_softirq_own_stack+0x1c/0x40 __irq_exit_rcu+0xd4/0x10c irq_exit_rcu+0x10/0x1c el1_interrupt+0x38/0x68 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 cpuidle_enter_state+0xac/0x320 (P) cpuidle_enter+0x38/0x50 do_idle+0x1e4/0x260 cpu_startup_entry+0x34/0x3c rest_init+0xdc/0xe0 console_on_rootfs+0x0/0x6c __primary_switched+0x88/0x90 ``` Fixes: 0a8bd81fd6aa ("net: ethernet: mtk-star-emac: separate tx/rx handling with two NAPIs") Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://patch.msgid.link/20250424-mtk_star_emac-fix-spinlock-recursion-issue-v2-1-f3fde2e529d8@collabora.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-25rtase: Modify the condition used to detect overflow in ↵Justin Lai
rtase_calc_time_mitigation Fix the following compile error reported by the kernel test robot by modifying the condition used to detect overflow in rtase_calc_time_mitigation. In file included from include/linux/mdio.h:10:0, from drivers/net/ethernet/realtek/rtase/rtase_main.c:58: In function 'u16_encode_bits', inlined from 'rtase_calc_time_mitigation.constprop' at drivers/net/ ethernet/realtek/rtase/rtase_main.c:1915:13, inlined from 'rtase_init_software_variable.isra.41' at drivers/net/ ethernet/realtek/rtase/rtase_main.c:1961:13, inlined from 'rtase_init_one' at drivers/net/ethernet/realtek/ rtase/rtase_main.c:2111:2: >> include/linux/bitfield.h:178:3: error: call to '__field_overflow' declared with attribute error: value doesn't fit into mask __field_overflow(); \ ^~~~~~~~~~~~~~~~~~ include/linux/bitfield.h:198:2: note: in expansion of macro '____MAKE_OP' ____MAKE_OP(u##size,u##size,,) ^~~~~~~~~~~ include/linux/bitfield.h:200:1: note: in expansion of macro '__MAKE_OP' __MAKE_OP(16) ^~~~~~~~~ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202503182158.nkAlbJWX-lkp@intel.com/ Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module") Signed-off-by: Justin Lai <justinlai0215@realtek.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250424040444.5530-1-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-26LoongArch: KVM: Fix PMU pass-through issue if VM exits to host finallyBibo Mao
In function kvm_pre_enter_guest(), it prepares to enter guest and check whether there are pending signals or events. And it will not enter guest if there are, PMU pass-through preparation for guest should be cancelled and host should own PMU hardware. Cc: stable@vger.kernel.org Fixes: f4e40ea9f78f ("LoongArch: KVM: Add PMU support for guest") Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-04-26LoongArch: KVM: Fully clear some CSRs when VM rebootBibo Mao
Some registers such as LOONGARCH_CSR_ESTAT and LOONGARCH_CSR_GINTC are partly cleared with function _kvm_setcsr(). This comes from the hardware specification, some bits are read only in VM mode, and however they can be written in host mode. So they are partly cleared in VM mode, and can be fully cleared in host mode. These read only bits show pending interrupt or exception status. When VM reset, the read-only bits should be cleared, otherwise vCPU will receive unknown interrupts in boot stage. Here registers LOONGARCH_CSR_ESTAT/LOONGARCH_CSR_GINTC are fully cleared in ioctl KVM_REG_LOONGARCH_VCPU_RESET vCPU reset path. Cc: stable@vger.kernel.org Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-04-26LoongArch: KVM: Fix multiple typos of KVM codeYulong Han
Fix multiple typos inside arch/loongarch/kvm. Cc: stable@vger.kernel.org Reviewed-by: Yuli Wang <wangyuli@uniontech.com> Reviewed-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Yulong Han <wheatfox17@icloud.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-04-26LoongArch: Return NULL from huge_pte_offset() for invalid PMDMing Wang
LoongArch's huge_pte_offset() currently returns a pointer to a PMD slot even if the underlying entry points to invalid_pte_table (indicating no mapping). Callers like smaps_hugetlb_range() fetch this invalid entry value (the address of invalid_pte_table) via this pointer. The generic is_swap_pte() check then incorrectly identifies this address as a swap entry on LoongArch, because it satisfies the "!pte_present() && !pte_none()" conditions. This misinterpretation, combined with a coincidental match by is_migration_entry() on the address bits, leads to kernel crashes in pfn_swap_entry_to_page(). Fix this at the architecture level by modifying huge_pte_offset() to check the PMD entry's content using pmd_none() before returning. If the entry is invalid (i.e., it points to invalid_pte_table), return NULL instead of the pointer to the slot. Cc: stable@vger.kernel.org Acked-by: Peter Xu <peterx@redhat.com> Co-developed-by: Hongchen Zhang <zhanghongchen@loongson.cn> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> Signed-off-by: Ming Wang <wangming01@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-04-26LoongArch: Remove a bogus reference to ZONE_DMAPetr Tesarik
Remove dead code. LoongArch does not have a DMA memory zone (24bit DMA). The architecture does not even define MAX_DMA_PFN. Cc: stable@vger.kernel.org Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Signed-off-by: Petr Tesarik <ptesarik@suse.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-04-26LoongArch: Handle fp, lsx, lasx and lbt assembly symbolsTiezhu Yang
Like the other relevant symbols, export some fp, lsx, lasx and lbt assembly symbols and put the function declarations in header files rather than source files. While at it, use "asmlinkage" for the other existing C prototypes of assembly functions and also do not use the "extern" keyword with function declarations according to the document coding-style.rst. Cc: stable@vger.kernel.org # 6.6+ Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-04-26LoongArch: Make do_xyz() exception handlers more robustTiezhu Yang
Currently, interrupts need to be disabled before single-step mode is set, it requires that CSR_PRMD_PIE be cleared in save_local_irqflag() which is called by setup_singlestep(), this is reasonable. But in the first kprobe breakpoint exception, if the irq is enabled at the beginning of do_bp(), it will not be disabled at the end of do_bp() due to the CSR_PRMD_PIE has been cleared in save_local_irqflag(). So for this case, it may corrupt exception context when restoring the exception after do_bp() in handle_bp(), this is not reasonable. In order to restore exception safely in handle_bp(), it needs to ensure the irq is disabled at the end of do_bp(), so just add a local variable to record the original interrupt status in the parent context, then use it as the check condition to enable and disable irq in do_bp(). While at it, do the similar thing for other do_xyz() exception handlers to make them more robust. Fixes: 6d4cc40fb5f5 ("LoongArch: Add kprobes support") Suggested-by: Jinyang He <hejinyang@loongson.cn> Suggested-by: Huacai Chen <chenhuacai@loongson.cn> Co-developed-by: Tianyang Zhang <zhangtianyang@loongson.cn> Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-04-26LoongArch: Make regs_irqs_disabled() more clearTiezhu Yang
In the current code, the definition of regs_irqs_disabled() is actually "!(regs->csr_prmd & CSR_CRMD_IE)" because arch_irqs_disabled_flags() is defined as "!(flags & CSR_CRMD_IE)", it looks a little strange. Define regs_irqs_disabled() as !(regs->csr_prmd & CSR_PRMD_PIE) directly to make it more clear, no functional change. While at it, the return value of regs_irqs_disabled() is true or false, so change its type to reflect that and also make it always inline. Fixes: 803b0fc5c3f2 ("LoongArch: Add process management") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
generated by cgit (git 2.34.1) at 2025-09-09 20:47:27 +0000