summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-04-11igc: add lock preventing multiple simultaneous PTM transactionsChristopher S M Hall
Add a mutex around the PTM transaction to prevent multiple transactors Multiple processes try to initiate a PTM transaction, one or all may fail. This can be reproduced by running two instances of the following: $ sudo phc2sys -O 0 -i tsn0 -m PHC2SYS exits with: "ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction fails Note: Normally two instance of PHC2SYS will not run, but one process should not break another. Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()") Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com> Reviewed-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-11igc: cleanup PTP module if probe failsChristopher S M Hall
Make sure that the PTP module is cleaned up if the igc_probe() fails by calling igc_ptp_stop() on exit. Fixes: d89f88419f99 ("igc: Add skeletal frame for Intel(R) 2.5G Ethernet Controller support") Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com> Reviewed-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-11igc: handle the IGC_PTP_ENABLED flag correctlyChristopher S M Hall
All functions in igc_ptp.c called from igc_main.c should check the IGC_PTP_ENABLED flag. Adding check for this flag to stop and reset functions. Fixes: 5f2958052c58 ("igc: Add basic skeleton for PTP") Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com> Reviewed-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-11igc: move ktime snapshot into PTM retry loopChristopher S M Hall
Move ktime_get_snapshot() into the loop. If a retry does occur, a more recent snapshot will result in a more accurate cross-timestamp. Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com> Reviewed-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-11igc: increase wait time before retrying PTMChristopher S M Hall
The i225/i226 hardware retries if it receives an inappropriate response from the upstream device. If the device retries too quickly, the root port does not respond. The wait between attempts was reduced from 10us to 1us in commit 6b8aa753a9f9 ("igc: Decrease PTM short interval from 10 us to 1 us"), which said: With the 10us interval, we were seeing PTM transactions take around 12us. Hardware team suggested this interval could be lowered to 1us which was confirmed with PCIe sniffer. With the 1us interval, PTM dialogs took around 2us. While a 1us short cycle time was thought to be theoretically sufficient, it turns out in practice it is not quite long enough. It is unclear if the problem is in the root port or an issue in i225/i226. Increase the wait from 1us to 4us. Increasing to 2us appeared to work in practice on the setups we have available. A value of 4us was chosen due to the limited hardware available for testing, with a goal of ensuring we wait long enough without overly penalizing the response time when unnecessary. The issue can be reproduced with the following: $ sudo phc2sys -R 1000 -O 0 -i tsn0 -m Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to quickly reproduce the issue. PHC2SYS exits with: "ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction fails Fixes: 6b8aa753a9f9 ("igc: Decrease PTM short interval from 10 us to 1 us") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com> Reviewed-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-11igc: fix PTM cycle trigger logicChristopher S M Hall
Writing to clear the PTM status 'valid' bit while the PTM cycle is triggered results in unreliable PTM operation. To fix this, clear the PTM 'trigger' and status after each PTM transaction. The issue can be reproduced with the following: $ sudo phc2sys -R 1000 -O 0 -i tsn0 -m Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to quickly reproduce the issue. PHC2SYS exits with: "ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction fails This patch also fixes a hang in igc_probe() when loading the igc driver in the kdump kernel on systems supporting PTM. The igc driver running in the base kernel enables PTM trigger in igc_probe(). Therefore the driver is always in PTM trigger mode, except in brief periods when manually triggering a PTM cycle. When a crash occurs, the NIC is reset while PTM trigger is enabled. Due to a hardware problem, the NIC is subsequently in a bad busmaster state and doesn't handle register reads/writes. When running igc_probe() in the kdump kernel, the first register access to a NIC register hangs driver probing and ultimately breaks kdump. With this patch, igc has PTM trigger disabled most of the time, and the trigger is only enabled for very brief (10 - 100 us) periods when manually triggering a PTM cycle. Chances that a crash occurs during a PTM trigger are not 0, but extremely reduced. Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Tested-by: Avigail Dahan <avigailx.dahan@intel.com> Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com> Reviewed-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Corinna Vinschen <vinschen@redhat.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-04-11Merge tag 'spi-fix-v6.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A couple of cleanups for the error handling in the Freescale drivers" * tag 'spi-fix-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fsl-spi: Remove redundant probe error message spi: fsl-qspi: Fix double cleanup in probe error path
2025-04-11Merge tag 'ata-6.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata fixes from Damien Le Moal: - Fix missing error checks during controller probe in the sata_sx4 driver (Wentao) - Fix missing error checks during controller probe in the pata_pxa driver (Henry) * tag 'ata-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: sata_sx4: Add error handling in pdc20621_i2c_read() ata: pata_pxa: Fix potential NULL pointer dereference in pxa_ata_probe()
2025-04-11Merge tag 'block-6.15-20250411' of git://git.kernel.dk/linuxLinus Torvalds
Pull more block fixes from Jens Axboe: "Apparently my internal clock was off, or perhaps it was just wishful thinking, but I sent out block fixes yesterday as my brain assumed it was Friday. Subsequently, that missed the NVMe fixes that should go into this weeks release as well. Hence, here's a followup with those, and another simple fix. - NVMe pull request via Christoph: - nvmet fc/fcloop refcounting fixes (Daniel Wagner) - fix missed namespace/ANA scans (Hannes Reinecke) - fix a use after free in the new TCP netns support (Kuniyuki Iwashima) - fix a NULL instead of false review in multipath (Uday Shankar) - Use strscpy() for null_blk disk name copy" * tag 'block-6.15-20250411' of git://git.kernel.dk/linux: null_blk: Use strscpy() instead of strscpy_pad() in null_add_dev() nvmet-fc: put ref when assoc->del_work is already scheduled nvmet-fc: take tgtport reference only once nvmet-fc: update tgtport ref per assoc nvmet-fc: inline nvmet_fc_free_hostport nvmet-fc: inline nvmet_fc_delete_assoc nvmet-fcloop: add ref counting to lport nvmet-fcloop: replace kref with refcount nvmet-fcloop: swap list_add_tail arguments nvme-tcp: fix use-after-free of netns by kernel TCP socket. nvme: multipath: fix return value of nvme_available_path nvme: re-read ANA log page after ns scan completes nvme: requeue namespace scan on missed AENs
2025-04-11Merge tag 'iommu-fixes-v6.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux Pull iommu fixes from Joerg Roedel: - Fix two crashes, one in core code and a NULL-ptr dereference in the Mediatek IOMMU driver - Dma_ops cleanup fix for core code - Two fixes for Intel VT-d driver: - Fix posted MSI issue when users change cpu affinity - Remove invalid set_dma_ops() call in the iommu driver - Warning fix for Tegra IOMMU driver - Suspend/Resume fix for Exynos IOMMU driver - Probe failure fix for Renesas IOMMU driver - Cosmetic fix * tag 'iommu-fixes-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: iommu/tegra241-cmdqv: Fix warnings due to dmam_free_coherent() iommu: remove unneeded semicolon iommu/mediatek: Fix NULL pointer deference in mtk_iommu_device_group iommu/exynos: Fix suspend/resume with IDENTITY domain iommu/ipmmu-vmsa: Register in a sensible order iommu: Clear iommu-dma ops on cleanup iommu/vt-d: Remove an unnecessary call set_dma_ops() iommu/vt-d: Wire up irq_ack() to irq_move_irq() for posted MSIs iommu: Fix crash in report_iommu_fault()
2025-04-11Merge tag 'acpi-6.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix a recent regression in the ACPI button driver, add quirks related to EC wakeups from suspend-to-idle and fix coding mistakes related to the usage of sizeof() in the PPTT parser code: Summary: - Add suspend-to-idle EC wakeup quirks for Lenovo Go S (Mario Limonciello) - Prevent ACPI button from sending spurions KEY_POWER events to user space in some cases after a recent update (Mario Limonciello) - Compute the size of a structure instead of the size of a pointer in two places in the PPTT parser code (Jean-Marc Eurin)" * tag 'acpi-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI PPTT: Fix coding mistakes in a couple of sizeof() calls ACPI: EC: Set ec_no_wakeup for Lenovo Go S ACPI: button: Only send `KEY_POWER` for `ACPI_BUTTON_NOTIFY_STATUS`
2025-04-11Merge tag 's390-6.15-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: "Note that besides two bug fixes this includes three commits for IBM z17, which was announced this week. - Add IBM z17 bits: - Setup elf_platform for new machine types - Allow to compile the kernel with z17 optimizations - Add new performance counters - Fix mismatch between indicator bits and queue indexes in virtio CCW code - Fix double free in pmu setup error path" * tag 's390-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cpumf: Fix double free on error in cpumf_pmu_event_init() s390/cpumf: Update CPU Measurement facility extended counter set support s390: Allow to compile with z17 optimizations s390: Add z17 elf platform s390/virtio_ccw: Don't allocate/assign airqs for non-existing queues
2025-04-11tty: Require CAP_SYS_ADMIN for all usages of TIOCL_SELMOUSEREPORTGünther Noack
This requirement was overeagerly loosened in commit 2f83e38a095f ("tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN"), but as it turns out, (1) the logic I implemented there was inconsistent (apologies!), (2) TIOCL_SELMOUSEREPORT might actually be a small security risk after all, and (3) TIOCL_SELMOUSEREPORT is only meant to be used by the mouse daemon (GPM or Consolation), which runs as CAP_SYS_ADMIN already. In more detail: 1. The previous patch has inconsistent logic: In commit 2f83e38a095f ("tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN"), we checked for sel_mode == TIOCL_SELMOUSEREPORT, but overlooked that the lower four bits of this "mode" parameter were actually used as an additional way to pass an argument. So the patch did actually still require CAP_SYS_ADMIN, if any of the mouse button bits are set, but did not require it if none of the mouse buttons bits are set. This logic is inconsistent and was not intentional. We should have the same policies for using TIOCL_SELMOUSEREPORT independent of the value of the "hidden" mouse button argument. I sent a separate documentation patch to the man page list with more details on TIOCL_SELMOUSEREPORT: https://lore.kernel.org/all/20250223091342.35523-2-gnoack3000@gmail.com/ 2. TIOCL_SELMOUSEREPORT is indeed a potential security risk which can let an attacker simulate "keyboard" input to command line applications on the same terminal, like TIOCSTI and some other TIOCLINUX "selection mode" IOCTLs. By enabling mouse reporting on a terminal and then injecting mouse reports through TIOCL_SELMOUSEREPORT, an attacker can simulate mouse movements on the same terminal, similar to the TIOCSTI keystroke injection attacks that were previously possible with TIOCSTI and other TIOCL_SETSEL selection modes. Many programs (including libreadline/bash) are then prone to misinterpret these mouse reports as normal keyboard input because they do not expect input in the X11 mouse protocol form. The attacker does not have complete control over the escape sequence, but they can at least control the values of two consecutive bytes in the binary mouse reporting escape sequence. I went into more detail on that in the discussion at https://lore.kernel.org/all/20250221.0a947528d8f3@gnoack.org/ It is not equally trivial to simulate arbitrary keystrokes as it was with TIOCSTI (commit 83efeeeb3d04 ("tty: Allow TIOCSTI to be disabled")), but the general mechanism is there, and together with the small number of existing legit use cases (see below), it would be better to revert back to requiring CAP_SYS_ADMIN for TIOCL_SELMOUSEREPORT, as it was already the case before commit 2f83e38a095f ("tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN"). 3. TIOCL_SELMOUSEREPORT is only used by the mouse daemons (GPM or Consolation), and they are the only legit use case: To quote console_codes(4): The mouse tracking facility is intended to return xterm(1)-compatible mouse status reports. Because the console driver has no way to know the device or type of the mouse, these reports are returned in the console input stream only when the virtual terminal driver receives a mouse update ioctl. These ioctls must be generated by a mouse-aware user-mode application such as the gpm(8) daemon. Jared Finder has also confirmed in https://lore.kernel.org/all/491f3df9de6593df8e70dbe77614b026@finder.org/ that Emacs does not call TIOCL_SELMOUSEREPORT directly, and it would be difficult to find good reasons for doing that, given that it would interfere with the reports that GPM is sending. More information on the interaction between GPM, terminals and the kernel with additional pointers is also available in this patch: https://lore.kernel.org/all/a773e48920aa104a65073671effbdee665c105fc.1603963593.git.tammo.block@gmail.com/ For background on who else uses TIOCL_SELMOUSEREPORT: Debian Code search finds one page of results, the only two known callers are the two mouse daemons GPM and Consolation. (GPM does not show up in the search results because it uses literal numbers to refer to TIOCLINUX-related enums. I looked through GPM by hand instead. TIOCL_SELMOUSEREPORT is also not used from libgpm.) https://codesearch.debian.net/search?q=TIOCL_SELMOUSEREPORT Cc: Jared Finder <jared@finder.org> Cc: Jann Horn <jannh@google.com> Cc: Hanno Böck <hanno@hboeck.de> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Kees Cook <kees@kernel.org> Cc: stable <stable@kernel.org> Fixes: 2f83e38a095f ("tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN") Signed-off-by: Günther Noack <gnoack3000@gmail.com> Link: https://lore.kernel.org/r/20250411070144.3959-2-gnoack3000@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11serial: msm: Configure correct working mode before starting earlyconStephan Gerhold
The MSM UART DM controller supports different working modes, e.g. DMA or the "single-character mode", where all reads/writes operate on a single character rather than 4 chars (32-bit) at once. When using earlycon, __msm_console_write() always writes 4 characters at a time, but we don't know which mode the bootloader was using and we don't set the mode either. This causes garbled output if the bootloader was using the single-character mode, because only every 4th character appears in the serial console, e.g. "[ 00oni pi 000xf0[ 00i s 5rm9(l)l s 1 1 SPMTA 7:C 5[ 00A ade k d[ 00ano:ameoi .Q1B[ 00ac _idaM00080oo'" If the bootloader was using the DMA ("DM") mode, output would likely fail entirely. Later, when the full serial driver probes, the port is re-initialized and output works as expected. Fix this also for earlycon by clearing the DMEN register and reset+re-enable the transmitter to apply the change. This ensures the transmitter is in the expected state before writing any output. Cc: stable <stable@kernel.org> Fixes: 0efe72963409 ("tty: serial: msm: Add earlycon support") Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250408-msm-serial-earlycon-v1-1-429080127530@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11dt-bindings: timer: renesas,tpu: remove obsolete bindingKuninori Morimoto
Commit 1c4b5ecb7ea1 ("remove the h8300 architecture") removed Renesas TPU timer driver. Let's remove its binding. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/877c3vnq0k.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-04-11Merge tag 'ovl-fixes-6.15-rc2' of ↵Christian Brauner
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs Bring in overlayfs fixes for the current cycle. * tag 'ovl-fixes-6.15-rc2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs: ovl: remove unused forward declaration ovl: don't allow datadir only Link: https://lore.kernel.org/CAJfpegt-EE4RROKDXA3g5GxAYXQrWcLAL1TfTPK-%3DVmPC7U13g@mail.gmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-04-11USB: wdm: add annotationOliver Neukum
This is not understandable without a comment on endianness Fixes: afba937e540c9 ("USB: CDC WDM driver") Cc: stable <stable@kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20250401084749.175246-5-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11USB: wdm: wdm_wwan_port_tx_complete mutex in atomic contextOliver Neukum
wdm_wwan_port_tx_complete is called from a completion handler with irqs disabled and possible in IRQ context usb_autopm_put_interface can take a mutex. Hence usb_autopm_put_interface_async must be used. Fixes: cac6fb015f71 ("usb: class: cdc-wdm: WWAN framework integration") Cc: stable <stable@kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20250401084749.175246-4-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11USB: wdm: close race between wdm_open and wdm_wwan_port_stopOliver Neukum
Clearing WDM_WWAN_IN_USE must be the last action or we can open a chardev whose URBs are still poisoned Fixes: cac6fb015f71 ("usb: class: cdc-wdm: WWAN framework integration") Cc: stable <stable@kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20250401084749.175246-3-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11USB: wdm: handle IO errors in wdm_wwan_port_startOliver Neukum
In case submitting the URB fails we must undo what we've done so far. Fixes: cac6fb015f71 ("usb: class: cdc-wdm: WWAN framework integration") Cc: stable <stable@kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20250401084749.175246-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11USB: VLI disk crashes if LPM is usedOliver Neukum
This device needs the NO_LPM quirk. Cc: stable <stable@kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20250408135800.792515-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11usb: dwc3: gadget: check that event count does not exceed event buffer lengthFrode Isaksen
The event count is read from register DWC3_GEVNTCOUNT. There is a check for the count being zero, but not for exceeding the event buffer length. Check that event count does not exceed event buffer length, avoiding an out-of-bounds access when memcpy'ing the event. Crash log: Unable to handle kernel paging request at virtual address ffffffc0129be000 pc : __memcpy+0x114/0x180 lr : dwc3_check_event_buf+0xec/0x348 x3 : 0000000000000030 x2 : 000000000000dfc4 x1 : ffffffc0129be000 x0 : ffffff87aad60080 Call trace: __memcpy+0x114/0x180 dwc3_interrupt+0x24/0x34 Signed-off-by: Frode Isaksen <frode@meta.com> Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable <stable@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20250403072907.448524-1-fisaksen@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11USB: storage: quirk for ADATA Portable HDD CH94Oliver Neukum
Version 1.60 specifically needs this quirk. Version 2.00 is known good. Cc: stable <stable@kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20250403180004.343133-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11Revert "wifi: mac80211: Update skb's control block key in ↵Johannes Berg
ieee80211_tx_dequeue()" This reverts commit a104042e2bf6528199adb6ca901efe7b60c2c27f. Since the original bug seems to have been around for years, but a new issue was report with the fix, revert the fix for now. We have a couple of weeks to figure it out for this release, if needed. Reported-by: Bert Karwatzki <spasswolf@web.de> Closes: https://lore.kernel.org/linux-wireless/20250410215527.3001-1-spasswolf@web.de Fixes: a104042e2bf6 ("wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-11usb: quirks: add DELAY_INIT quirk for Silicon Motion Flash DriveMiao Li
Silicon Motion Flash Drive connects to Huawei hisi platforms and performs a system reboot test for two thousand circles, it will randomly work incorrectly on boot, set DELAY_INIT quirk can workaround this issue. Signed-off-by: Miao Li <limiao@kylinos.cn> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20250401023027.44894-1-limiao870622@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11USB: OHCI: Add quirk for LS7A OHCI controller (rev 0x02)Huacai Chen
The OHCI controller (rev 0x02) under LS7A PCI host has a hardware flaw. MMIO register with offset 0x60/0x64 is treated as legacy PS2-compatible keyboard/mouse interface, which confuse the OHCI controller. Since OHCI only use a 4KB BAR resource indeed, the LS7A OHCI controller's 32KB BAR is wrapped around (the second 4KB BAR space is the same as the first 4KB internally). So we can add an 4KB offset (0x1000) to the OHCI registers (from the PCI BAR resource) as a quirk. Cc: stable <stable@kernel.org> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Mingcong Bai <baimingcong@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://lore.kernel.org/r/20250328040059.3672979-1-chenhuacai@loongson.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11usb: dwc3: xilinx: Prevent spike in reset signalMike Looijmans
The "reset" GPIO controls the RESET signal to an external, usually ULPI PHY, chip. The original code path acquires the signal in LOW state, and then immediately asserts it HIGH again, if the reset signal defaulted to asserted, there'd be a short "spike" before the reset. Here is what happens depending on the pre-existing state of the reset signal: Reset (previously asserted): ~~~|_|~~~~|_______ Reset (previously deasserted): _____|~~~~|_______ ^ ^ ^ A B C At point A, the low going transition is because the reset line is requested using GPIOD_OUT_LOW. If the line is successfully requested, the first thing we do is set it high _without_ any delay. This is point B. So, a glitch occurs between A and B. Requesting the line using GPIOD_OUT_HIGH eliminates the A and B transitions. Instead we get: Reset (previously asserted) : ~~~~~~~~~~|______ Reset (previously deasserted): ____|~~~~~|______ ^ ^ A C Where A and C are the points described above in the code. Point B has been eliminated. The issue was found during code inspection. Also remove the cryptic "toggle ulpi .." comment. Fixes: ca05b38252d7 ("usb: dwc3: xilinx: Add gpio-reset support") Cc: stable <stable@kernel.org> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20250318064518.9320-1-mike.looijmans@topic.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11usb: cdns3: Fix deadlock when using NCM gadgetRalph Siemsen
The cdns3 driver has the same NCM deadlock as fixed in cdnsp by commit 58f2fcb3a845 ("usb: cdnsp: Fix deadlock issue during using NCM gadget"). Under PREEMPT_RT the deadlock can be readily triggered by heavy network traffic, for example using "iperf --bidir" over NCM ethernet link. The deadlock occurs because the threaded interrupt handler gets preempted by a softirq, but both are protected by the same spinlock. Prevent deadlock by disabling softirq during threaded irq handler. Cc: stable <stable@kernel.org> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Acked-by: Peter Chen <peter.chen@kernel.org> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20250318-rfs-cdns3-deadlock-v2-1-bfd9cfcee732@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11usb: chipidea: ci_hdrc_imx: implement usb_phy_init() error handlingFedor Pchelkin
usb_phy_init() may return an error code if e.g. its implementation fails to prepare/enable some clocks. And properly rollback on probe error path by calling the counterpart usb_phy_shutdown(). Found by Linux Verification Center (linuxtesting.org). Fixes: be9cae2479f4 ("usb: chipidea: imx: Fix ULPI on imx53") Cc: stable <stable@kernel.org> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20250316102658.490340-4-pchelkin@ispras.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11usb: chipidea: ci_hdrc_imx: fix call balance of regulator routinesFedor Pchelkin
Upon encountering errors during the HSIC pinctrl handling section the regulator should be disabled. Use devm_add_action_or_reset() to let the regulator-disabling routine be handled by device resource management stack. Found by Linux Verification Center (linuxtesting.org). Fixes: 4d6141288c33 ("usb: chipidea: imx: pinctrl for HSIC is optional") Cc: stable <stable@kernel.org> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20250316102658.490340-3-pchelkin@ispras.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11usb: chipidea: ci_hdrc_imx: fix usbmisc handlingFedor Pchelkin
usbmisc is an optional device property so it is totally valid for the corresponding data->usbmisc_data to have a NULL value. Check that before dereferencing the pointer. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool. Fixes: 74adad500346 ("usb: chipidea: ci_hdrc_imx: decrement device's refcount in .remove() and in the error path of .probe()") Cc: stable <stable@kernel.org> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20250316102658.490340-2-pchelkin@ispras.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11wifi: iwlwifi: mld: Restart firmware on iwl_mld_no_wowlan_resume() errorLukas Wunner
Commit 44605365f935 ("iwlwifi: mld: fix building with CONFIG_PM_SLEEP disabled") sought to fix build breakage, but inadvertently introduced a new issue: iwl_mld_mac80211_start() no longer calls iwl_mld_start_fw() after having called iwl_mld_stop_fw() in the error path of iwl_mld_no_wowlan_resume(). Fix it. Fixes: 44605365f935 ("iwlwifi: mld: fix building with CONFIG_PM_SLEEP disabled") Reported-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Closes: https://lore.kernel.org/r/MW5PR11MB58106D6BC6403845C330C7AAA3A22@MW5PR11MB5810.namprd11.prod.outlook.com/ Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/d3ba1006a1b72ceb58c593fa62b9bd7c73e2e4ed.1744366815.git.lukas@wunner.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-11fs: use namespace_{lock,unlock} in dissolve_on_fput()Jan Stancek
In commit b73ec10a4587 ("fs: add fastpath for dissolve_on_fput()"), the namespace_{lock,unlock} has been replaced with scoped_guard using the namespace_sem. This however now also skips processing of 'unmounted' list in namespace_unlock(), and mount is not (immediately) cleaned up. For example, this causes LTP move_mount02 fail: ... move_mount02.c:80: TPASS: invalid-from-fd: move_mount() failed as expected: EBADF (9) move_mount02.c:80: TPASS: invalid-from-path: move_mount() failed as expected: ENOENT (2) move_mount02.c:80: TPASS: invalid-to-fd: move_mount() failed as expected: EBADF (9) move_mount02.c:80: TPASS: invalid-to-path: move_mount() failed as expected: ENOENT (2) move_mount02.c:80: TPASS: invalid-flags: move_mount() failed as expected: EINVAL (22) tst_test.c:1833: TINFO: === Testing on ext3 === tst_test.c:1170: TINFO: Formatting /dev/loop0 with ext3 opts='' extra opts='' mke2fs 1.47.2 (1-Jan-2025) /dev/loop0 is apparently in use by the system; will not make a filesystem here! tst_test.c:1170: TBROK: mkfs.ext3 failed with exit code 1 The test makes number of move_mount() calls but these are all designed to fail with specific errno. Even after test, 'losetup -d' can't detach loop device. Define a new guard for dissolve_on_fput, that will use namespace_{lock,unlock}. Fixes: b73ec10a4587 ("fs: add fastpath for dissolve_on_fput()") Signed-off-by: Jan Stancek <jstancek@redhat.com> Link: https://lore.kernel.org/cad2f042b886bf0ced3d8e3aff120ec5e0125d61.1744297468.git.jstancek@redhat.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-04-11wifi: iwlwifi: pcie: set state to no-FW before reset handshakeJohannes Berg
The reset handshake attempts to kill the firmware, and it'll go into a pretty much dead state once we do that. However, if it times out, then we'll attempt to dump the firmware to be able to see why it didn't respond. During this dump, we cannot treat it as if it was still running, since we just tried to kill it, otherwise dumping will attempt to send a DBGC stop command. As this command will time out, we'll go into a reset loop. For now, fix this by setting the trans->state to say firmware isn't running before doing the reset handshake. In the longer term, we should clean up the way this state is handled. It's not entirely clear but it seems likely that this issue was introduced by my rework of the error handling, prior to that it would've been synchronous at that point and (I think) not have attempted to reset since it was already doing down. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219967 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219968 Fixes: 7391b2a4f7db ("wifi: iwlwifi: rework firmware error handling") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20250411104054.63aa4f56894d.Ife70cfe997db03f0d07fdef2b164695739a05a63@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-04-11iomap: skip unnecessary ifs_block_is_uptodate checkGou Hao
In iomap_adjust_read_range, i is either the first !uptodate block, or it is past last for the second loop looking for trailing uptodate blocks. Assuming there's no overflow (there's no combination of huge folios and tiny blksize) then yeah, there is no point in retesting that the same block pointed to by i is uptodate since we hold the folio lock so nobody else could have set it uptodate. Signed-off-by: Gou Hao <gouhao@uniontech.com> Link: https://lore.kernel.org/20250410071236.16017-1-gouhao@uniontech.com Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-04-11fs: Fix filename init after recent refactoringSong Liu
getname_flags() should save __user pointer "filename" in filename->uptr. However, this logic is broken by a recent refactoring. Fix it by passing __user pointer filename to helper initname(). Fixes: 611851010c74 ("fs: dedup handling of struct filename init and refcounts bumps") Cc: Mateusz Guzik <mjguzik@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/20250409220534.3635801-1-song@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-04-11netfs: Only create /proc/fs/netfs with CONFIG_PROC_FSSong Liu
When testing a special config: CONFIG_NETFS_SUPPORTS=y CONFIG_PROC_FS=n The system crashes with something like: [ 3.766197] ------------[ cut here ]------------ [ 3.766484] kernel BUG at mm/mempool.c:560! [ 3.766789] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 3.767123] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W [ 3.767777] Tainted: [W]=WARN [ 3.767968] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), [ 3.768523] RIP: 0010:mempool_alloc_slab.cold+0x17/0x19 [ 3.768847] Code: 50 fe ff 58 5b 5d 41 5c 41 5d 41 5e 41 5f e9 93 95 13 00 [ 3.769977] RSP: 0018:ffffc90000013998 EFLAGS: 00010286 [ 3.770315] RAX: 000000000000002f RBX: ffff888100ba8640 RCX: 0000000000000000 [ 3.770749] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 00000000ffffffff [ 3.771217] RBP: 0000000000092880 R08: 0000000000000000 R09: ffffc90000013828 [ 3.771664] R10: 0000000000000001 R11: 00000000ffffffea R12: 0000000000092cc0 [ 3.772117] R13: 0000000000000400 R14: ffff8881004b1620 R15: ffffea0004ef7e40 [ 3.772554] FS: 0000000000000000(0000) GS:ffff8881b5f3c000(0000) knlGS:0000000000000000 [ 3.773061] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.773443] CR2: ffffffff830901b4 CR3: 0000000004296001 CR4: 0000000000770ef0 [ 3.773884] PKRU: 55555554 [ 3.774058] Call Trace: [ 3.774232] <TASK> [ 3.774371] mempool_alloc_noprof+0x6a/0x190 [ 3.774649] ? _printk+0x57/0x80 [ 3.774862] netfs_alloc_request+0x85/0x2ce [ 3.775147] netfs_readahead+0x28/0x170 [ 3.775395] read_pages+0x6c/0x350 [ 3.775623] ? srso_alias_return_thunk+0x5/0xfbef5 [ 3.775928] page_cache_ra_unbounded+0x1bd/0x2a0 [ 3.776247] filemap_get_pages+0x139/0x970 [ 3.776510] ? srso_alias_return_thunk+0x5/0xfbef5 [ 3.776820] filemap_read+0xf9/0x580 [ 3.777054] ? srso_alias_return_thunk+0x5/0xfbef5 [ 3.777368] ? srso_alias_return_thunk+0x5/0xfbef5 [ 3.777674] ? find_held_lock+0x32/0x90 [ 3.777929] ? netfs_start_io_read+0x19/0x70 [ 3.778221] ? netfs_start_io_read+0x19/0x70 [ 3.778489] ? srso_alias_return_thunk+0x5/0xfbef5 [ 3.778800] ? lock_acquired+0x1e6/0x450 [ 3.779054] ? srso_alias_return_thunk+0x5/0xfbef5 [ 3.779379] netfs_buffered_read_iter+0x57/0x80 [ 3.779670] __kernel_read+0x158/0x2c0 [ 3.779927] bprm_execve+0x300/0x7a0 [ 3.780185] kernel_execve+0x10c/0x140 [ 3.780423] ? __pfx_kernel_init+0x10/0x10 [ 3.780690] kernel_init+0xd5/0x150 [ 3.780910] ret_from_fork+0x2d/0x50 [ 3.781156] ? __pfx_kernel_init+0x10/0x10 [ 3.781414] ret_from_fork_asm+0x1a/0x30 [ 3.781677] </TASK> [ 3.781823] Modules linked in: [ 3.782065] ---[ end trace 0000000000000000 ]--- This is caused by the following error path in netfs_init(): if (!proc_mkdir("fs/netfs", NULL)) goto error_proc; Fix this by adding ifdef in netfs_main(), so that /proc/fs/netfs is only created with CONFIG_PROC_FS. Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/20250409170015.2651829-1-song@kernel.org Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-04-11Merge tag 'asoc-fix-v6.15-rc1' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.15 A set of small fixes, quirks and device ID additions that came in since -rc1, none of them super stand out. There's also a change to Srini's email address in MAINTAINERS.
2025-04-11Merge branches 'acpi-ec' and 'acpi-button'Rafael J. Wysocki
Merge updates of the ACPI EC and button drivers for 6.15-rc2: - Add suspend-to-idle EC wakeup quirks for Lenovo Go S (Mario Limonciello). - Prevent ACPI button from sending spurions KEY_POWER events to user space in some cases after a recent update (Mario Limonciello). * acpi-ec: ACPI: EC: Set ec_no_wakeup for Lenovo Go S * acpi-button: ACPI: button: Only send `KEY_POWER` for `ACPI_BUTTON_NOTIFY_STATUS`
2025-04-11mount: ensure we don't pointlessly walk the mount treeChristian Brauner
This logic got broken recently. Add it back. Fixes: 474f7825d533 ("fs: add copy_mount_setattr() helper") Link: https://lore.kernel.org/20250409-sektflaschen-gecko-27c021fbd222@brauner Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-04-11dcache: convert dentry flag macros to enumOmar Sandoval
Commit 9748cb2dc393 ("VFS: repack DENTRY_ flags.") changed the value of DCACHE_MOUNTED, which broke drgn's path_lookup() helper. drgn is forced to hard-code it because it's a macro, and macros aren't preserved in debugging information by default. Enums, on the other hand, are included in debugging information. Convert the DCACHE_* flag macros to an enum so that debugging tools like drgn and bpftrace can make use of them. Link: https://github.com/osandov/drgn/blob/2027d0fea84d74b835e77392f7040c2a333180c6/drgn/helpers/linux/fs.py#L43-L46 Signed-off-by: Omar Sandoval <osandov@fb.com> Link: https://lore.kernel.org/177665a082f048cf536b9cd6af467b3be6b6e6ed.1744141838.git.osandov@fb.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-04-11afs: Fix afs_dynroot_readdir() to not use the RCU read lockDavid Howells
afs_dynroot_readdir() uses the RCU read lock to walk the cell list whilst emitting cell automount entries - but dir_emit() may write to a userspace buffer, thereby causing a fault to occur and waits to happen. Fix afs_dynroot_readdir() to get a shared lock on net->cells_lock instead. This can be triggered by enabling lockdep, preconfiguring a number of cells, doing "mount -t afs none /afs -o dyn" (or using the kafs-client package with afs.mount systemd unit enabled) and then doing "ls /afs". Fixes: 1d0b929fc070 ("afs: Change dynroot to create contents on demand") Reported-by: syzbot+3b6c5c6a1d0119b687a1@syzkaller.appspotmail.com Reported-by: syzbot+8245611446194a52150d@syzkaller.appspotmail.com Reported-by: syzbot+1aa62e6852a6ad1c7944@syzkaller.appspotmail.com Reported-by: syzbot+54e6c2176ba76c56217e@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/1638014.1744145189@warthog.procyon.org.uk cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-04-11null_blk: Use strscpy() instead of strscpy_pad() in null_add_dev()Thorsten Blum
blk_mq_alloc_disk() already zero-initializes the destination buffer, making strscpy() sufficient for safely copying the disk's name. The additional NUL-padding performed by strscpy_pad() is unnecessary. If the destination buffer has a fixed length, strscpy() automatically determines its size using sizeof() when the argument is omitted. This makes the explicit size argument unnecessary. The source string is also NUL-terminated and meets the __must_be_cstr() requirement of strscpy(). No functional changes intended. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250410154727.883207-1-thorsten.blum@linux.dev Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-11usb: typec: class: Invalidate USB device pointers on partner unregistrationAndrei Kuchynski
To avoid using invalid USB device pointers after a Type-C partner disconnects, this patch clears the pointers upon partner unregistration. This ensures a clean state for future connections. Cc: stable@vger.kernel.org Fixes: 59de2a56d127 ("usb: typec: Link enumerated USB devices with Type-C partner") Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Benson Leung <bleung@chromium.org> Link: https://lore.kernel.org/r/20250321143728.4092417-3-akuchynski@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11usb: typec: class: Fix NULL pointer accessAndrei Kuchynski
Concurrent calls to typec_partner_unlink_device can lead to a NULL pointer dereference. This patch adds a mutex to protect USB device pointers and prevent this issue. The same mutex protects both the device pointers and the partner device registration. Cc: stable@vger.kernel.org Fixes: 59de2a56d127 ("usb: typec: Link enumerated USB devices with Type-C partner") Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250321143728.4092417-2-akuchynski@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11dt-bindings: nvmem: Add compatible for MSM8960Rudraksha Gupta
Document the QFPROM on MSM8960. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rudraksha Gupta <guptarud@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250411112251.68002-14-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11dt-bindings: nvmem: Add compatible for IPQ5018Sricharan Ramabadhran
Document the QFPROM block found on IPQ5018 Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Signed-off-by: George Moussalem <george.moussalem@outlook.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250411112251.68002-13-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11nvmem: qfprom: switch to 4-byte aligned readsDmitry Baryshkov
All platforms since Snapdragon 8 Gen1 (SM8450) require using 4-byte reads to access QFPROM data. While older platforms were more than happy with 1-byte reads, change the qfprom driver to use 4-byte reads for all the platforms. Specify stride and word size of 4 bytes. To retain compatibility with the existing DT and to simplify porting data from vendor kernels, use fixup_dt_cell_info in order to bump alignment requirements. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250411112251.68002-12-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11nvmem: core: update raw_len if the bit reading is requiredDmitry Baryshkov
If NVMEM cell uses bit offset or specifies bit truncation, update raw_len manually (following the cell->bytes update), ensuring that the NVMEM access is still word-aligned. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250411112251.68002-11-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-04-11nvmem: core: verify cell's raw_lenDmitry Baryshkov
Check that the NVMEM cell's raw_len is a aligned to word_size. Otherwise Otherwise drivers might face incomplete read while accessing the last part of the NVMEM cell. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20250411112251.68002-10-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-13 23:11:26 +0000