| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Just a few more changes:
- mac80211: allow non-standard VHT MCSes 10/11
- mac80211: add sleepable station iterator for drivers
- nl80211: clarify a comment
- mac80211: small cleanup to use typed element helpers
* tag 'mac80211-next-for-net-next-2022-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next:
mac80211: use ieee80211_bss_get_elem()
nl80211: clarify comment for mesh PLINK_BLOCKED state
mac80211: Add stations iterator where the iterator function may sleep
mac80211: allow non-standard VHT MCS-10/11
====================
Link: https://lore.kernel.org/r/20220104153403.69749-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current EPB "normal" is defined as 6 and set whenever power-up EPB
value is 0. This setting resulted in the desired out of box power and
performance for several CPU generations. But this value is not suitable
for AlderLake mobile CPUs, as this resulted in higher uncore power.
Since EPB is model specific, this is not unreasonable to have different
behavior.
Allow a capability where "normal" EPB can be redefined. For AlderLake
mobile CPUs this desired normal value is 7.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Two more changes:
- mac80211: initialize a variable to avoid using it uninitialized
- mac80211 mesh: put some data structures into the container to
fix bugs with and not have to deal with allocation failures
* tag 'mac80211-for-net-2022-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
mac80211: initialize variable have_higher_than_11mbit
====================
Link: https://lore.kernel.org/r/20220104144449.64937-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit e2012600810c ("arm64: perf: Add userspace counter access disable
switch") introduced a new 'perf_user_access' sysctl file to enable and
disable direct userspace access to the PMU counters. Sadly, Geert
reports that on his big.LITTLE SoC ('Renesas Salvator-XS w/ R-Car H3'),
the file is created for each PMU type probed, resulting in a splat
during boot:
| hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
| sysctl duplicate entry: /kernel//perf_user_access
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.16.0-rc3-arm64-renesas-00003-ge2012600810c #1420
| Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
| Call trace:
| dump_backtrace+0x0/0x190
| show_stack+0x14/0x20
| dump_stack_lvl+0x88/0xb0
| dump_stack+0x14/0x2c
| __register_sysctl_table+0x384/0x818
| register_sysctl+0x20/0x28
| armv8_pmu_init.constprop.0+0x118/0x150
| armv8_a57_pmu_init+0x1c/0x28
| arm_pmu_device_probe+0x1b4/0x558
| armv8_pmu_device_probe+0x18/0x20
| platform_probe+0x64/0xd0
| hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7 counters available
Introduce a state variable to track creation of the sysctl file and
ensure that it is only created once.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: e2012600810c ("arm64: perf: Add userspace counter access disable switch")
Link: https://lore.kernel.org/r/CAMuHMdVcDxR9sGzc5pcnORiotonERBgc6dsXZXMd6wTvLGA9iw@mail.gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Instead of ieee80211_bss_get_ie(), use the more typed
ieee80211_bss_get_elem().
Link: https://lore.kernel.org/r/20211220113609.56f8e2a70152.Id5a56afb8a4f9b38d10445e5a1874e93e84b5251@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When a mesh link is in blocked state, it is very useful to still allow
auth requests from the peer to re-establish it.
When a remote node is power cycled, the peer state can easily end up
in blocked state if multiple auth attempts are performed. Since this
can lead to several minutes of downtime, we should accept auth attempts
of the peer after it has come back.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20211220105147.88625-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
ieee80211_iterate_active_interfaces() and
ieee80211_iterate_active_interfaces_atomic() already exist, where the
former allows the iterator function to sleep. Add
ieee80211_iterate_stations() which is similar to
ieee80211_iterate_stations_atomic() but allows the iterator to sleep.
This is needed for adding SDIO support to the rtw88 driver. Some
interators there are reading or writing registers. With the SDIO ops
(sdio_readb, sdio_writeb and friends) this means that the iterator
function may sleep.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20211228211501.468981-2-martin.blumenstingl@googlemail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some AP can possibly try non-standard VHT rate and mac80211 warns and drops
packets, and leads low TCP throughput.
Rate marked as a VHT rate but data is invalid: MCS: 10, NSS: 2
WARNING: CPU: 1 PID: 7817 at net/mac80211/rx.c:4856 ieee80211_rx_list+0x223/0x2f0 [mac8021
Since commit c27aa56a72b8 ("cfg80211: add VHT rate entries for MCS-10 and MCS-11")
has added, mac80211 adds this support as well.
After this patch, throughput is good and iw can get the bitrate:
rx bitrate: 975.1 MBit/s VHT-MCS 10 80MHz short GI VHT-NSS 2
or
rx bitrate: 1083.3 MBit/s VHT-MCS 11 80MHz short GI VHT-NSS 2
Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192891
Reported-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20220103013623.17052-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
So far all of the tablets for which the skip i2c-client/serdev enumeration
quirks have been added also all have broken ACPI AC / battery devices
extend the existing quirks for these tablets to also skip the broken
AC / battery devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some x86 ACPI boards have broken AC and battery ACPI devices in their ACPI
tables. This is often tied to these devices using certain PMICs where the
factory OS image seems to be using native charger and fuel-gauge drivers
instead.
So far both the AC and battery drivers have almost identical checks for
these PMICs including both of them having a DMI based mechanism to force
usage of the ACPI AC and battery drivers on some boards even though one
of these PMICs is present, with the same 2 boards listed in both driver's
DMI tables for this.
The only difference is that the AC driver checks for 2 PMICs and the
battery driver only for one. This has grown this way because the other
(Whiskey Cove) PMIC is only used on a few boards (3 known boards) and
although some of these do have non working ACPI battery devices, their
_STA method always returns 0, but that really should not be relied on.
This patch factors out the shared checks into a new
acpi_quirk_skip_acpi_ac_and_battery() helper and moves the AC and
battery drivers over to this new helper.
Note the DMI table is shared with acpi_quirk_skip_i2c_client_enumeration()
and acpi_quirk_skip_serdev_enumeration(), because boards needing DMI quirks
for either of these typically also have broken AC and battery ACPI devices.
The ACPI_QUIRK_SKIP_ACPI_AC_AND_BATTERY quirk is not set yet on boards
already in this DMI table, to avoid introducing any functional changes
in this refactoring patch.
Besided sharing the code between the AC and battery drivers this
refactoring also moves this quirk handling to under #ifdef CONFIG_X86,
removing this x86 specific code from non x86 ACPI builds.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge recent device enumeration changes to satisfy dependencies.
|
|
The same rxe_map_set could be freed twice:
rxe_reg_user_mr()
-> rxe_mr_init_user()
-> rxe_mr_free_map_set() # 1st
-> rxe_drop_ref()
...
-> rxe_mr_cleanup()
-> rxe_mr_free_map_set() # 2nd
Follow normal convection and put resource cleanup either in the error
unwind of the allocator, or the overall free function. Leave the object
unchanged with a NULL cur_map_set on failure and remove the unncessary
free in rxe_mr_init_user().
Link: https://lore.kernel.org/r/20211228014406.1033444-1-lizhijian@cn.fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Syzbot hit NULL deref in rhashtable_free_and_destroy(). The problem was
in mesh_paths and mpp_paths being NULL.
mesh_pathtbl_init() could fail in case of memory allocation failure, but
nobody cared, since ieee80211_mesh_init_sdata() returns void. It led to
leaving 2 pointers as NULL. Syzbot has found null deref on exit path,
but it could happen anywhere else, because code assumes these pointers are
valid.
Since all ieee80211_*_setup_sdata functions are void and do not fail,
let's embedd mesh_paths and mpp_paths into parent struct to avoid
adding error handling on higher levels and follow the pattern of others
setup_sdata functions
Fixes: 60854fd94573 ("mac80211: mesh: convert path table to rhashtable")
Reported-and-tested-by: syzbot+860268315ba86ea6b96b@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20211230195547.23977-1-paskripkin@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Clang static analysis reports this warnings
mlme.c:5332:7: warning: Branch condition evaluates to a
garbage value
have_higher_than_11mbit)
^~~~~~~~~~~~~~~~~~~~~~~
have_higher_than_11mbit is only set to true some of the time in
ieee80211_get_rates() but is checked all of the time. So
have_higher_than_11mbit needs to be initialized to false.
Fixes: 5d6a1b069b7f ("mac80211: set basic rates earlier")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20211223162848.3243702-1-trix@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The devm_ioremap() function does not return error pointers. It returns
NULL.
Fixes: 036a7584bede ("drivers: perf: Add LLC-TAD perf counter support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211217145907.GA16611@kili
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The kbuild robot reports that building the SMMUv3 PMU driver with
CONFIG_OF=n results in a warning for W=1 builds:
>> drivers/perf/arm_smmuv3_pmu.c:889:34: warning: unused variable 'smmu_pmu_of_match' [-Wunused-const-variable]
static const struct of_device_id smmu_pmu_of_match[] = {
^
Guard the match table with #ifdef CONFIG_OF.
Link: https://lore.kernel.org/r/202201041700.01KZEzhb-lkp@intel.com
Fixes: 3f7be4356176 ("perf/smmuv3: Add devicetree support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Return value from efx_mcdi_rpc() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
xu xin says:
====================
ipv4: Namespaceify two sysctls related with mtu
The following patch series enables the min_pmtu and mtu_expires to
be visible and configurable per net namespace. Different namespace
application might have different requirements on the setting of
min_pmtu and mtu_expires.
If these two patches are applied, inside a net namespace we create,
we can see two more sysctls under /proc/sys/net/ipv4/route:
1. min_pmtu
2. mtu_expires
where min_pmtu and mtu_expires are configurable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch enables the sysctl mtu_expires to be configured per net
namespace.
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch enables the sysctl min_pmtu to be configured per net
namespace.
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tx_queue_len can be set to ~0U, we need to be more
careful about overflows.
__fls(0) is undefined, as this report shows:
UBSAN: shift-out-of-bounds in net/sched/sch_qfq.c:1430:24
shift exponent 51770272 is too large for 32-bit type 'int'
CPU: 0 PID: 25574 Comm: syz-executor.0 Not tainted 5.16.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x201/0x2d8 lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:151 [inline]
__ubsan_handle_shift_out_of_bounds+0x494/0x530 lib/ubsan.c:330
qfq_init_qdisc+0x43f/0x450 net/sched/sch_qfq.c:1430
qdisc_create+0x895/0x1430 net/sched/sch_api.c:1253
tc_modify_qdisc+0x9d9/0x1e20 net/sched/sch_api.c:1660
rtnetlink_rcv_msg+0x934/0xe60 net/core/rtnetlink.c:5571
netlink_rcv_skb+0x200/0x470 net/netlink/af_netlink.c:2496
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x814/0x9f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0xaea/0xe60 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x5b9/0x910 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmsg+0x280/0x370 net/socket.c:2492
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This code used to copy in an unsigned long worth of data before
the sockptr_t conversion, so restore that.
Fixes: a7b75c5a8c41 ("net: pass a sockptr_t into ->setsockopt")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recent bpf-next merge brought in header changes which uncovered
includes missing in net-next which were not present in bpf-next.
Build problems happen only on less-popular arches like hppa,
sparc, alpha etc.
I could repro the build problem with ice but not the mlx5 problem
Abdul was reporting. mlx5 does look like it should include filter.h,
anyway.
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Fixes: e63a02348958 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next")
Link: https://lore.kernel.org/all/7c03768d-d948-c935-a7ab-b1f963ac7eed@linux.vnet.ibm.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for scatter gather DMA. DMA in PMAC splits
the packet into several buffers when the MTU on the CPU port is
less than the MTU of the switch. The first buffer starts at an
offset of NET_IP_ALIGN. In subsequent buffers, dma ignores the
offset. Thanks to this patch, the user can still connect to the
device in such a situation. For normal configurations, the patch
has no effect on performance.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Andrew Lunn says:
====================
Fix traceroute in the presence of SRv6
When using SRv6 the destination IP address in the IPv6 header is not
always the true destination, it can be a router along the path that
SRv6 is using.
When ICMP reports an error, e.g, time exceeded, which is what
traceroute uses, it included the packet which invoked the error into
the ICMP message body. Upon receiving such an ICMP packet, the
invoking packet is examined and an attempt is made to find the socket
which sent the packet, so the error can be reported. Lookup is
performed using the source and destination address. If the
intermediary router IP address from the IP header is used, the lookup
fails. It is necessary to dig into the header and find the true
destination address in the Segment Router header, SRH.
v2:
Play games with the skb->network_header rather than clone the skb
v3:
Move helpers into seg6.c
v4:
Move short helper into header file.
Rework getting SRH destination address
v5:
Fix comment to describe function, not caller
Patch 1 exports a helper which can find the SRH in a packet
Patch 2 does the actual examination of the invoking packet
Patch 3 makes use of the results when trying to find the socket.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When finding the socket to report an error on, if the invoking packet
is using Segment Routing, the IPv6 destination address is that of an
intermediate router, not the end destination. Extract the ultimate
destination address from the segment address.
This change allows traceroute to function in the presence of Segment
Routing.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
RFC8754 says:
ICMP error packets generated within the SR domain are sent to source
nodes within the SR domain. The invoking packet in the ICMP error
message may contain an SRH. Since the destination address of a packet
with an SRH changes as each segment is processed, it may not be the
destination used by the socket or application that generated the
invoking packet.
For the source of an invoking packet to process the ICMP error
message, the ultimate destination address of the IPv6 header may be
required. The following logic is used to determine the destination
address for use by protocol-error handlers.
* Walk all extension headers of the invoking IPv6 packet to the
routing extension header preceding the upper-layer header.
- If routing header is type 4 Segment Routing Header (SRH)
o The SID at Segment List[0] may be used as the destination
address of the invoking packet.
Mangle the skb so the network header points to the invoking packet
inside the ICMP packet. The seg6 helpers can then be used on the skb
to find any segment routing headers. If found, mark this fact in the
IPv6 control block of the skb, and store the offset into the packet of
the SRH. Then restore the skb back to its old state.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An ICMP error message can contain in its message body part of an IPv6
packet which invoked the error. Such a packet might contain a segment
router header. Export get_srh() so the ICMP code can make use of it.
Since his changes the scope of the function from local to global, add
the seg6_ prefix to keep the namespace clean. And move it into seg6.c
so it is always available, not just when IPV6_SEG6_LWTUNNEL is
enabled.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for external timestamp and periodic signal output.
TJA1103 have one periodic signal and one external time stamp signal that
can be multiplexed on all 11 gpio pins.
The periodic signal can be only enabled or disabled. Have no start time
and if is enabled will be generated with a period of one second in sync
with the LTC seconds counter. The phase change is possible only with a
half of a second.
The external timestamp signal has no interrupt and no valid bit and
that's why the timestamps are handled by polling in .do_aux_work.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Paul Blakey says:
====================
net/sched: Pass originating device to drivers offloading ct connection
Currently, drivers register to a ct zone that can be shared by multiple
devices. This can be inefficient for the driver to offload, as it
needs to handle all the cases where the tuple can come from,
instead of where it's most likely will arive from.
For example, consider the following tc rules:
tc filter add dev dev1 ... flower action ct commit zone 5 \
action mirred egress redirect dev dev2
tc filter add dev dev2 ... flower action ct zone 5 \
action goto chain chain 2
tc filter add dev dev2 ... flower ct_state +trk+est ... \
action mirred egress redirect dev dev1
Both dev2 and dev1 register to the zone 5 flow table (created
by act_ct). A tuple originating on dev1, going to dev2, will
be offloaded to both devices, and both will need to offload
both directions, resulting in 4 total rules. The traffic
will only hit originiating tuple on dev1, and reply tuple
on dev2.
By passing the originating device that created the connection
with the tuple, dev1 can choose to offload only the originating
tuple, and dev2 only the reply tuple. Resulting in a more
efficient offload.
The first patch adds an act_ct nf conntrack extension, to
temporarily store the originiating device from the skb before
offloading the connection once the connection is established.
Once sent to offload, it fills the tuple originating device.
The second patch get this information from tuples
which pass in openvswitch.
The third patch is Mellanox driver ct offload implementation using
this information to provide a hint to firmware of where this
offloaded tuple packets will arrive from (LOCAL or UPLINK port),
and thus increase insertion rate.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Get originating device from tuple offload metadata match ingress_ifindex,
and set flow_source hint to either LOCAL for vf/sf reps, UPLINK for
uplink/wire/tunnel devices/bond, or ANY (as before this patch)
for all others.
This allows lower layer (software steering or firmware) to insert the tuple
rule only in one table (either rx or tx) instead of two (rx and tx).
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To give drivers the originating device information for optimized
connection tracking offload, fill in act ct extension with
ifindex from skb.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Driver offloading ct tuples can use the information of which devices
received the packets that created the offloaded connections, to
more efficiently offload them only to the relevant device.
Add new act_ct nf conntrack extension, which is used to store the skb
devices before offloading the connection, and then fill in the tuple
iifindex so drivers can get the device via metadata dissector match.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-5.16
Pull MD fix from Song, fixing a raid1 regression with missing bitmap
updates.
* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid1: fix missing bitmap update w/o WriteMostly devices
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- allow netlink usage in unprivileged containers, by Linus Lüssing
- remove unneeded variable, by Minghao Chi
* tag 'batadv-next-pullrequest-20220103' of git://git.open-mesh.org/linux-merge:
batman-adv: remove unneeded variable in batadv_nc_init
batman-adv: allow netlink usage in unprivileged containers
batman-adv: Start new development cycle
====================
Link: https://lore.kernel.org/r/20220103171722.1126109-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- avoid sending link-local multicast to multicast routers,
by Linus Lüssing
* tag 'batadv-net-pullrequest-20220103' of git://git.open-mesh.org/linux-merge:
batman-adv: mcast: don't send link-local multicast to mcast routers
====================
Link: https://lore.kernel.org/r/20220103171203.1124980-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On systems with large numbers of MDIO bus/muxes the message indicating
that a given MDIO bus has been successfully probed is repeated for as
many buses we have, which can eat up substantial boot time for no
reason, demote to a debug print.
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220103194024.2620-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__fixed_phy_register"
This reverts commit b45396afa4177f2b1ddfeff7185da733fade1dc3 ("net: phy:
fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register")
since it prevents any system that uses a fixed PHY without a GPIO
descriptor from properly working:
[ 5.971952] brcm-systemport 9300000.ethernet: failed to register fixed PHY
[ 5.978854] brcm-systemport: probe of 9300000.ethernet failed with error -22
[ 5.986047] brcm-systemport 9400000.ethernet: failed to register fixed PHY
[ 5.992947] brcm-systemport: probe of 9400000.ethernet failed with error -22
Fixes: b45396afa417 ("net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220103193453.1214961-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
commit [1] causes missing bitmap updates when there isn't any WriteMostly
devices.
Detailed steps to reproduce by Norbert (which somehow didn't make to lore):
# setup md10 (raid1) with two drives (1 GByte sparse files)
dd if=/dev/zero of=disk1 bs=1024k seek=1024 count=0
dd if=/dev/zero of=disk2 bs=1024k seek=1024 count=0
losetup /dev/loop11 disk1
losetup /dev/loop12 disk2
mdadm --create /dev/md10 --level=1 --raid-devices=2 /dev/loop11 /dev/loop12
# add bitmap (aka write-intent log)
mdadm /dev/md10 --grow --bitmap=internal
echo check > /sys/block/md10/md/sync_action
root:# cat /sys/block/md10/md/mismatch_cnt
0
root:#
# remove member drive disk2 (loop12)
mdadm /dev/md10 -f loop12 ; mdadm /dev/md10 -r loop12
# modify degraded md device
dd if=/dev/urandom of=/dev/md10 bs=512 count=1
# no blocks recorded as out of sync on the remaining member disk1/loop11
root:# mdadm -X /dev/loop11 | grep Bitmap
Bitmap : 16 bits (chunks), 0 dirty (0.0%)
root:#
# re-add disk2, nothing synced because of empty bitmap
mdadm /dev/md10 --re-add /dev/loop12
# check integrity again
echo check > /sys/block/md10/md/sync_action
# disk1 and disk2 are no longer in sync, reads return differend data
root:# cat /sys/block/md10/md/mismatch_cnt
128
root:#
# clean up
mdadm -S /dev/md10
losetup -d /dev/loop11
losetup -d /dev/loop12
rm disk1 disk2
Fix this by moving the WriteMostly check to the if condition for
alloc_behind_master_bio().
[1] commit fd3b6975e9c1 ("md/raid1: only allocate write behind bio for WriteMostly device")
Fixes: fd3b6975e9c1 ("md/raid1: only allocate write behind bio for WriteMostly device")
Cc: stable@vger.kernel.org # v5.12+
Cc: Guoqing Jiang <guoqing.jiang@linux.dev>
Cc: Jens Axboe <axboe@kernel.dk>
Reported-by: Norbert Warmuth <nwarmuth@t-online.de>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Song Liu <song@kernel.org>
|
|
As Nicolas noted, if gateway validation fails walking the multipath
attribute the code should jump to the cleanup to free previously
allocated memory.
Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route")
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220103170555.94638-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ip6_route_multipath_del loop continues processing the multipath
attribute even if delete of a nexthop path fails. For consistency,
do the same if the gateway attribute is invalid.
Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route")
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220103171911.94739-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().
Moreover, as stated in [1], dma_set_mask() with a 64-bit mask will never
fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
That said, 'high_dma' can only be 1 after a successful
dma_set_mask_and_coherent().
Simplify code and remove some dead code accordingly, including a now
useless parameter to vxge_device_register().
[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().
Moreover, as stated in [1], dma_set_mask() with a 64-bit mask will never
fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.
That said, 'dma_flag' can only be 'true' after a successful
dma_set_mask_and_coherent().
Simplify code and remove some dead code accordingly, including the now
useless 'high_dma_flag' field in 'struct s2io_nic'.
[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sorry for being rude but new vendors/drivers are supposed to be disabled
by default, otherwise we will have to manually keep track of all vendors
we are not interested in building.
Fixes: 2f207cbf0dd4 ("net: vertexcom: Add MSE102x SPI support")
CC: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add Doug and Florian as maintainers for gpio-brcmstb, and remove myself.
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Each aspeed sgpio bank has 64 gpio pins(32 input pins and 32 output pins).
The hwirq base for each sgpio bank should be multiples of 64 rather than
multiples of 32.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix TUI exit screen refresh race condition in 'perf top'.
- Fix parsing of Intel PT VM time correlation arguments.
- Honour CPU filtering command line request of a script's switch events
in 'perf script'.
- Fix printing of switch events in Intel PT python script.
- Fix duplicate alias events list printing in 'perf list', noticed on
heterogeneous arm64 systems.
- Fix return value of ids__new(), users expect NULL for failure, not
ERR_PTR(-ENOMEM).
* tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf top: Fix TUI exit screen refresh race condition
perf pmu: Fix alias events list
perf scripts python: intel-pt-events.py: Fix printing of switch events
perf script: Fix CPU filtering of a script's switch events
perf intel-pt: Fix parsing of VM time correlation arguments
perf expr: Fix return value of ids__new()
|
|
Colin Foster says:
====================
lynx pcs interface cleanup
The current Felix driver (and Seville) rely directly on the lynx_pcs
device. There are other possible PCS interfaces that can be used with
this hardware, so this should be abstracted from felix. The generic
phylink_pcs is used instead.
While going through the code, there were some opportunities to change
some misleading variable names. Those are included in this patch set.
v1->v2
* compile-time fixes for freescale parts
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pcs-lynx.c used lynx_pcs and lynx as a variable name within the same file.
This standardizes all internal variables to just "lynx"
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
