| Age | Commit message (Collapse) | Author |
|---|
|
The driver supports many hw statistics. This patch supports
dump statistics through ethtool_ops and ndo.get_stats64().
The type of hw statistics register is u32,
To prevent the statistics register from overflowing,
the driver dump the statistics every 30 seconds.
in a scheduled task.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Lorenzo Bianconi says:
====================
Introduce flowtable hw offloading in airoha_eth driver
Introduce netfilter flowtable integration in airoha_eth driver to
offload 5-tuple flower rules learned by the PPE module if the user
accelerates them using a nft configuration similar to the one reported
below:
table inet filter {
flowtable ft {
hook ingress priority filter
devices = { lan1, lan2, lan3, lan4, eth1 }
flags offload;
}
chain forward {
type filter hook forward priority filter; policy accept;
meta l4proto { tcp, udp } flow add @ft
}
}
Packet Processor Engine (PPE) module available on EN7581 SoC populates
the PPE table with 5-tuples flower rules learned from traffic forwarded
between the GDM ports connected to the Packet Switch Engine (PSE) module.
airoha_eth driver configures and collects data from the PPE module via a
Network Processor Unit (NPU) RISC-V module available on the EN7581 SoC.
Move airoha_eth driver in a dedicated folder
(drivers/net/ethernet/airoha).
v7: https://lore.kernel.org/r/20250224-airoha-en7581-flowtable-offload-v7-0-b4a22ad8364e@kernel.org
v6: https://lore.kernel.org/r/20250221-airoha-en7581-flowtable-offload-v6-0-d593af0e9487@kernel.org
v5: https://lore.kernel.org/r/20250217-airoha-en7581-flowtable-offload-v5-0-28be901cb735@kernel.org
v4: https://lore.kernel.org/r/20250213-airoha-en7581-flowtable-offload-v4-0-b69ca16d74db@kernel.org
v3: https://lore.kernel.org/r/20250209-airoha-en7581-flowtable-offload-v3-0-dba60e755563@kernel.org
v2: https://lore.kernel.org/r/20250207-airoha-en7581-flowtable-offload-v2-0-3a2239692a67@kernel.org
v1: https://lore.kernel.org/r/20250205-airoha-en7581-flowtable-offload-v1-0-d362cfa97b01@kernel.org
====================
Link: https://patch.msgid.link/20250228-airoha-en7581-flowtable-offload-v8-0-01dc1653f46e@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Similar to PPE support for Mediatek devices, introduce PPE debugfs
in order to dump binded and unbinded flows.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Enable hw redirection for traffic received on GDM2 port to GDM{3,4}.
This is required to apply Qdisc offloading (HTB or ETS) for traffic to
and from GDM{3,4} port.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce netfilter flowtable integration in order to allow airoha_eth
driver to offload 5-tuple flower rules learned by the PPE module if the
user accelerates them using a nft configuration similar to the one reported
below:
table inet filter {
flowtable ft {
hook ingress priority filter
devices = { lan1, lan2, lan3, lan4, eth1 }
flags offload;
}
chain forward {
type filter hook forward priority filter; policy accept;
meta l4proto { tcp, udp } flow add @ft
}
}
Tested-by: Sayantan Nandy <sayantan.nandy@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Packet Processor Engine (PPE) module available on EN7581 SoC populates
the PPE table with 5-tuples flower rules learned from traffic forwarded
between the GDM ports connected to the Packet Switch Engine (PSE) module.
The airoha_eth driver can enable hw acceleration of learned 5-tuples
rules if the user configure them in netfilter flowtable (netfilter
flowtable support will be added with subsequent patches).
airoha_eth driver configures and collects data from the PPE module via a
Network Processor Unit (NPU) RISC-V module available on the EN7581 SoC.
Introduce basic support for Airoha NPU module.
Tested-by: Sayantan Nandy <sayantan.nandy@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce the airoha,npu property for the NPU node available on
EN7581 SoC. The airoha Network Processor Unit (NPU) is used to
offload network traffic forwarded between Packet Switch Engine
(PSE) ports.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch adds the NPU document binding for EN7581 SoC.
The Airoha Network Processor Unit (NPU) provides a configuration interface
to implement wired and wireless hardware flow offloading programming Packet
Processor Engine (PPE) flow table.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
airoha_set_vip_for_gdm_port()
Rename airoha_set_gdm_port() in airoha_set_vip_for_gdm_port().
Get rid of airoha_set_gdm_ports routine.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move REG_GDM_FWD_CFG() register initialization in airoha_dev_init
routine. Moreover, always send traffic PPE module in order to be
processed by hw accelerator.
This is a preliminary patch to enable netfilter flowtable hw offloading
on EN7581 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In the current codebase airoha_eth driver supports just a single
net_device connected to the Packet Switch Engine (PSE) lan port (GDM1).
As shown in commit 23020f049327 ("net: airoha: Introduce ethernet
support for EN7581 SoC"), PSE can switch packets between four GDM ports.
Enable the capability to create a net_device for each GDM port of the
PSE module. Moreover, since the QDMA blocks can be shared between
net_devices, do not stop TX/RX DMA in airoha_dev_stop() if there are
active net_devices for this QDMA block.
This is a preliminary patch to enable flowtable hw offloading for EN7581
SoC.
Co-developed-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Packet Processor Engine (PPE) module used for hw acceleration on EN7581
mac block, in order to properly parse packets, requires DSA untagged
packets on TX side and read DSA tag from DMA descriptor on RX side.
For this reason, enable RX Special Tag (SPTAG) for EN7581 SoC.
This is a preliminary patch to enable netfilter flowtable hw offloading
on EN7581 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Packet Processor Engine (PPE) module reads DSA tags from the DMA descriptor
and requires untagged DSA packets to properly parse them. Move DSA tag
in the DMA descriptor on TX side and read DSA tag from DMA descriptor
on RX side. In order to avoid skb reallocation, store tag in skb_dst on
RX side.
This is a preliminary patch to enable netfilter flowtable hw offloading
on EN7581 SoC.
Tested-by: Sayantan Nandy <sayantan.nandy@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move common airoha_eth register definitions in airoha_regs.h in order
to reuse them for Packet Processor Engine (PPE) codebase.
PPE module is used to enable support for flowtable hw offloading in
airoha_eth driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This is a preliminary patch to introduce flowtable hw offloading
support for airoha_eth driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move common airoha_eth definitions in airoha_eth.h in order to reuse
them for Packet Processor Engine (PPE) codebase.
PPE module is used to enable support for flowtable hw offloading in
airoha_eth driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The airoha_eth driver has no codebase shared with mtk_eth_soc one.
Moreover, the upcoming features (flowtable hw offloading, PCS, ..) will
not reuse any code from MediaTek driver. Move the Airoha driver in a
dedicated folder.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
hclge_ptp_get_cycle returns an error
During the initialization of ptp, hclge_ptp_get_cycle might return an error
and returned directly without unregister clock and free it. To avoid that,
call hclge_ptp_destroy_clock to unregist and free clock if
hclge_ptp_get_cycle failed.
Fixes: 8373cd38a888 ("net: hns3: change the method of obtaining default ptp cycle")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250228105258.1243461-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Both the APIs in cfg80211 and the implementation in mac80211
aren't really ready yet, we have a large number of fixes. In
addition, it's not possible right now to discover support for
this feature from userspace. Disable it for now, there's no
rush.
Link: https://patch.msgid.link/20250303110538.fbeef42a5687.Iab122c22137e5675ebd99f5c031e30c0e5c7af2e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Nicolas Dichtel says:
====================
net: notify users when an iface cannot change its netns
This series adds a way to see if an interface cannot be moved to another netns.
Documentation/netlink/specs/rt_link.yaml | 3 ++
.../networking/net_cachelines/net_device.rst | 2 +-
Documentation/networking/switchdev.rst | 2 +-
drivers/net/amt.c | 2 +-
drivers/net/bonding/bond_main.c | 2 +-
drivers/net/ethernet/adi/adin1110.c | 2 +-
.../net/ethernet/marvell/prestera/prestera_main.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 4 +-
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 +-
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 2 +-
drivers/net/ethernet/rocker/rocker_main.c | 2 +-
drivers/net/ethernet/ti/cpsw_new.c | 2 +-
drivers/net/loopback.c | 2 +-
drivers/net/net_failover.c | 2 +-
drivers/net/team/team_core.c | 2 +-
drivers/net/vrf.c | 2 +-
include/linux/netdevice.h | 9 +++--
include/uapi/linux/if_link.h | 1 +
net/batman-adv/soft-interface.c | 2 +-
net/bridge/br_device.c | 2 +-
net/core/dev.c | 45 +++++++++++++++++-----
net/core/rtnetlink.c | 5 ++-
net/hsr/hsr_device.c | 2 +-
net/ieee802154/6lowpan/core.c | 2 +-
net/ieee802154/core.c | 10 ++---
net/ipv4/ip_tunnel.c | 2 +-
net/ipv4/ipmr.c | 2 +-
net/ipv6/ip6_gre.c | 2 +-
net/ipv6/ip6_tunnel.c | 2 +-
net/ipv6/ip6mr.c | 2 +-
net/ipv6/sit.c | 2 +-
net/openvswitch/vport-internal_dev.c | 2 +-
net/wireless/core.c | 10 ++---
tools/testing/selftests/net/forwarding/README | 2 +-
34 files changed, 86 insertions(+), 53 deletions(-)
Comments are welcome.
Regards,
Nicolas
====================
Link: https://patch.msgid.link/20250228102144.154802-1-nicolas.dichtel@6wind.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It could be hard to understand why the netlink command fails. For example,
if dev->netns_immutable is set, the error is "Invalid argument".
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since commit 05c1280a2bcf ("netdev_features: convert NETIF_F_NETNS_LOCAL to
dev->netns_local"), there is no way to see if the netns_immutable property
s set on a device. Let's add a netlink attribute to advertise it.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The name 'netns_local' is confusing. A following commit will export it via
netlink, so let's use a more explicit name.
Reported-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make NET_DSA_REALTEK_RTL8366RB_LEDS a hidden symbol.
It seems very unlikely user would want to intentionally
disable it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250228004534.3428681-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Partially revert commit b71724147e73 ("be2net: replace polling with
sleeping in the FW completion path") w.r.t mcc mutex it introduces and the
use of usleep_range. The be2net be_ndo_bridge_getlink() callback is
called with rcu_read_lock, so this code has been broken for a long time.
Both the mutex_lock and the usleep_range can cause the issue Ian Kumlien
reported[1]. The call path is:
be_ndo_bridge_getlink -> be_cmd_get_hsw_config -> be_mcc_notify_wait ->
be_mcc_wait_compl -> usleep_range()
[1] https://lore.kernel.org/netdev/CAA85sZveppNgEVa_FD+qhOMtG_AavK9_mFiU+jWrMtXmwqefGA@mail.gmail.com/
Tested-by: Ian Kumlien <ian.kumlien@gmail.com>
Fixes: b71724147e73 ("be2net: replace polling with sleeping in the FW completion path")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250227164129.1201164-1-razor@blackwall.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Peter Seiderer says:
====================
Some pktgen fixes/improvments (part II)
While taking a look at '[PATCH net] pktgen: Avoid out-of-range in
get_imix_entries' ([1]) and '[PATCH net v2] pktgen: Avoid out-of-bounds
access in get_imix_entries' ([2], [3]) and doing some tests and code review
I detected that the /proc/net/pktgen/... parsing logic does not honour the
user given buffer bounds (resulting in out-of-bounds access).
This can be observed e.g. by the following simple test (sometimes the
old/'longer' previous value is re-read from the buffer):
$ echo add_device lo@0 > /proc/net/pktgen/kpktgend_0
$ echo "min_pkt_size 12345" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0
Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0
Result: OK: min_pkt_size=12345
$ echo -n "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0
Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0
Result: OK: min_pkt_size=12345
$ echo "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0
Params: count 1000 min_pkt_size: 123 max_pkt_size: 0
Result: OK: min_pkt_size=123
So fix the out-of-bounds access (and some minor findings) and add a simple
proc_net_pktgen selftest...
Patch set splited into part I (now already applied to net-next)
- net: pktgen: replace ENOTSUPP with EOPNOTSUPP
- net: pktgen: enable 'param=value' parsing
- net: pktgen: fix hex32_arg parsing for short reads
- net: pktgen: fix 'rate 0' error handling (return -EINVAL)
- net: pktgen: fix 'ratep 0' error handling (return -EINVAL)
- net: pktgen: fix ctrl interface command parsing
- net: pktgen: fix access outside of user given buffer in pktgen_thread_write()
nd part II (this one):
- net: pktgen: use defines for the various dec/hex number parsing digits lengths
- net: pktgen: fix mix of int/long
- net: pktgen: remove extra tmp variable (re-use len instead)
- net: pktgen: remove some superfluous variable initializing
- net: pktgen: fix mpls maximum labels list parsing
- net: pktgen: fix access outside of user given buffer in pktgen_if_write()
- net: pktgen: fix mpls reset parsing
- net: pktgen: remove all superfluous index assignements
- selftest: net: add proc_net_pktgen
[1] https://lore.kernel.org/netdev/20241006221221.3744995-1-artem.chernyshev@red-soft.ru/
[2] https://lore.kernel.org/netdev/20250109083039.14004-1-pchelkin@ispras.ru/
[3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76201b5979768500bca362871db66d77cb4c225e
====================
Link: https://patch.msgid.link/20250227135604.40024-1-ps.report@gmx.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add some test for /proc/net/pktgen/... interface.
- enable 'CONFIG_NET_PKTGEN=m' in tools/testing/selftests/net/config
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove all superfluous index ('i += len') assignements (value not used
afterwards).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix mpls list reset parsing to work as describe in
Documentation/networking/pktgen.rst:
pgset "mpls 0" turn off mpls (or any invalid argument works too!)
- before the patch
$ echo "mpls 00000001,00000002" > /proc/net/pktgen/lo\@0
$ grep mpls /proc/net/pktgen/lo\@0
mpls: 00000001, 00000002
Result: OK: mpls=00000001,00000002
$ echo "mpls 00000001,00000002" > /proc/net/pktgen/lo\@0
$ echo "mpls 0" > /proc/net/pktgen/lo\@0
$ grep mpls /proc/net/pktgen/lo\@0
mpls: 00000000
Result: OK: mpls=00000000
$ echo "mpls 00000001,00000002" > /proc/net/pktgen/lo\@0
$ echo "mpls invalid" > /proc/net/pktgen/lo\@0
$ grep mpls /proc/net/pktgen/lo\@0
Result: OK: mpls=
- after the patch
$ echo "mpls 00000001,00000002" > /proc/net/pktgen/lo\@0
$ grep mpls /proc/net/pktgen/lo\@0
mpls: 00000001, 00000002
Result: OK: mpls=00000001,00000002
$ echo "mpls 00000001,00000002" > /proc/net/pktgen/lo\@0
$ echo "mpls 0" > /proc/net/pktgen/lo\@0
$ grep mpls /proc/net/pktgen/lo\@0
Result: OK: mpls=
$ echo "mpls 00000001,00000002" > /proc/net/pktgen/lo\@0
$ echo "mpls invalid" > /proc/net/pktgen/lo\@0
$ grep mpls /proc/net/pktgen/lo\@0
Result: OK: mpls=
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Honour the user given buffer size for the hex32_arg(), num_arg(),
strn_len(), get_imix_entries() and get_labels() calls (otherwise they will
access memory outside of the user given buffer).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix mpls maximum labels list parsing up to MAX_MPLS_LABELS entries (instead
of up to MAX_MPLS_LABELS - 1).
Addresses the following:
$ echo "mpls 00000f00,00000f01,00000f02,00000f03,00000f04,00000f05,00000f06,00000f07,00000f08,00000f09,00000f0a,00000f0b,00000f0c,00000f0d,00000f0e,00000f0f" > /proc/net/pktgen/lo\@0
-bash: echo: write error: Argument list too long
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove some superfluous variable initializing before hex32_arg call (as the
same init is done here already).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove extra tmp variable in pktgen_if_write (re-use len instead).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix mix of int/long (and multiple conversion from/to) by using consequently
size_t for i and max and ssize_t for len and adjust function signatures
of hex32_arg(), count_trail_chars(), num_arg() and strn_len() accordingly.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
CPUID leaf 0x2's one-byte TLB descriptors report the number of entries
for specific TLB types, among other properties.
Typically, each emitted descriptor implies the same number of entries
for its respective TLB type(s). An emitted 0x63 descriptor is an
exception: it implies 4 data TLB entries for 1GB pages and 32 data TLB
entries for 2MB or 4MB pages.
For the TLB descriptors parsing code, the entry count for 1GB pages is
encoded at the intel_tlb_table[] mapping, but the 2MB/4MB entry count is
totally ignored.
Update leaf 0x2's parsing logic 0x2 to account for 32 data TLB entries
for 2MB/4MB pages implied by the 0x63 descriptor.
Fixes: e0ba94f14f74 ("x86/tlb_info: get last level TLB entry number of CPU")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304085152.51092-4-darwi@linutronix.de
|
|
CPUID leaf 0x2 emits one-byte descriptors in its four output registers
EAX, EBX, ECX, and EDX. For these descriptors to be valid, the most
significant bit (MSB) of each register must be clear.
Leaf 0x2 parsing at intel.c only validated the MSBs of EAX, EBX, and
ECX, but left EDX unchecked.
Validate EDX's most-significant bit as well.
Fixes: e0ba94f14f74 ("x86/tlb_info: get last level TLB entry number of CPU")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304085152.51092-3-darwi@linutronix.de
|
|
CPUID leaf 0x2 emits one-byte descriptors in its four output registers
EAX, EBX, ECX, and EDX. For these descriptors to be valid, the most
significant bit (MSB) of each register must be clear.
The historical Git commit:
019361a20f016 ("- pre6: Intel: start to add Pentium IV specific stuff (128-byte cacheline etc)...")
introduced leaf 0x2 output parsing. It only validated the MSBs of EAX,
EBX, and ECX, but left EDX unchecked.
Validate EDX's most-significant bit.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304085152.51092-2-darwi@linutronix.de
|
|
Currently kvfree_rcu() APIs use a system workqueue which is
"system_unbound_wq" to driver RCU machinery to reclaim a memory.
Recently, it has been noted that the following kernel warning can
be observed:
<snip>
workqueue: WQ_MEM_RECLAIM nvme-wq:nvme_scan_work is flushing !WQ_MEM_RECLAIM events_unbound:kfree_rcu_work
WARNING: CPU: 21 PID: 330 at kernel/workqueue.c:3719 check_flush_dependency+0x112/0x120
Modules linked in: intel_uncore_frequency(E) intel_uncore_frequency_common(E) skx_edac(E) ...
CPU: 21 UID: 0 PID: 330 Comm: kworker/u144:6 Tainted: G E 6.13.2-0_g925d379822da #1
Hardware name: Wiwynn Twin Lakes MP/Twin Lakes Passive MP, BIOS YMM20 02/01/2023
Workqueue: nvme-wq nvme_scan_work
RIP: 0010:check_flush_dependency+0x112/0x120
Code: 05 9a 40 14 02 01 48 81 c6 c0 00 00 00 48 8b 50 18 48 81 c7 c0 00 00 00 48 89 f9 48 ...
RSP: 0018:ffffc90000df7bd8 EFLAGS: 00010082
RAX: 000000000000006a RBX: ffffffff81622390 RCX: 0000000000000027
RDX: 00000000fffeffff RSI: 000000000057ffa8 RDI: ffff88907f960c88
RBP: 0000000000000000 R08: ffffffff83068e50 R09: 000000000002fffd
R10: 0000000000000004 R11: 0000000000000000 R12: ffff8881001a4400
R13: 0000000000000000 R14: ffff88907f420fb8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88907f940000(0000) knlGS:0000000000000000
CR2: 00007f60c3001000 CR3: 000000107d010005 CR4: 00000000007726f0
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0xa4/0x140
? check_flush_dependency+0x112/0x120
? report_bug+0xe1/0x140
? check_flush_dependency+0x112/0x120
? handle_bug+0x5e/0x90
? exc_invalid_op+0x16/0x40
? asm_exc_invalid_op+0x16/0x20
? timer_recalc_next_expiry+0x190/0x190
? check_flush_dependency+0x112/0x120
? check_flush_dependency+0x112/0x120
__flush_work.llvm.1643880146586177030+0x174/0x2c0
flush_rcu_work+0x28/0x30
kvfree_rcu_barrier+0x12f/0x160
kmem_cache_destroy+0x18/0x120
bioset_exit+0x10c/0x150
disk_release.llvm.6740012984264378178+0x61/0xd0
device_release+0x4f/0x90
kobject_put+0x95/0x180
nvme_put_ns+0x23/0xc0
nvme_remove_invalid_namespaces+0xb3/0xd0
nvme_scan_work+0x342/0x490
process_scheduled_works+0x1a2/0x370
worker_thread+0x2ff/0x390
? pwq_release_workfn+0x1e0/0x1e0
kthread+0xb1/0xe0
? __kthread_parkme+0x70/0x70
ret_from_fork+0x30/0x40
? __kthread_parkme+0x70/0x70
ret_from_fork_asm+0x11/0x20
</TASK>
---[ end trace 0000000000000000 ]---
<snip>
To address this switch to use of independent WQ_MEM_RECLAIM
workqueue, so the rules are not violated from workqueue framework
point of view.
Apart of that, since kvfree_rcu() does reclaim memory it is worth
to go with WQ_MEM_RECLAIM type of wq because it is designed for
this purpose.
Fixes: 6c6c47b063b5 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"),
Reported-by: Keith Busch <kbusch@kernel.org>
Closes: https://lore.kernel.org/all/Z7iqJtCjHKfo8Kho@kbusch-mbp/
Cc: stable@vger.kernel.org
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
After phy initialization, some phy operations can only be executed while
in lower P states. Ensure GUSB3PIPECTL.SUSPENDENABLE and
GUSB2PHYCFG.SUSPHY are set soon after initialization to avoid blocking
phy ops.
Previously the SUSPENDENABLE bits are only set after the controller
initialization, which may not happen right away if there's no gadget
driver or xhci driver bound. Revise this to clear SUSPENDENABLE bits
only when there's mode switching (change in GCTL.PRTCAPDIR).
Fixes: 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init")
Cc: stable <stable@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/633aef0afee7d56d2316f7cc3e1b2a6d518a8cc9.1738280911.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add quirk for a copper SFP that identifies itself as "FS" "SFP-10GM-T".
It uses RollBall protocol to talk to the PHY and needs 4 sec wait before
probing the PHY.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://patch.msgid.link/20250227071058.1520027-1-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 6639498ed85f ("mptcp: cleanup mem accounting")
removed the implementation but leave declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250228095148.4003065-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Geliang Tang says:
====================
add sock_kmemdup helper
While developing MPTCP BPF path manager [1], I found it's useful to
add a new sock_kmemdup() helper.
My use case is this:
In mptcp_userspace_pm_append_new_local_addr() function (see patch 3
in this patchset), it uses sock_kmalloc() to allocate an address
entry "e", then immediately duplicate the input "entry" to it:
'''
e = sock_kmalloc(sk, sizeof(*e), GFP_ATOMIC);
if (!e) {
ret = -ENOMEM;
goto append_err;
}
*e = *entry;
'''
When I implemented MPTCP BPF path manager, I needed to implement a
code similar to this in BPF.
The kfunc sock_kmalloc() can be easily invoked in BPF to allocate
an entry "e", but the code "*e = *entry;" that assigns "entry" to
"e" is not easy to implemented.
I had to implement such a "copy entry" helper in BPF:
'''
static void mptcp_pm_copy_addr(struct mptcp_addr_info *dst,
struct mptcp_addr_info *src)
{
dst->id = src->id;
dst->family = src->family;
dst->port = src->port;
if (src->family == AF_INET) {
dst->addr.s_addr = src->addr.s_addr;
} else if (src->family == AF_INET6) {
dst->addr6.s6_addr32[0] = src->addr6.s6_addr32[0];
dst->addr6.s6_addr32[1] = src->addr6.s6_addr32[1];
dst->addr6.s6_addr32[2] = src->addr6.s6_addr32[2];
dst->addr6.s6_addr32[3] = src->addr6.s6_addr32[3];
}
}
static void mptcp_pm_copy_entry(struct mptcp_pm_addr_entry *dst,
struct mptcp_pm_addr_entry *src)
{
mptcp_pm_copy_addr(&dst->addr, &src->addr);
dst->flags = src->flags;
dst->ifindex = src->ifindex;
}
'''
And add "write permission" for BPF to each field of mptcp_pm_addr_entry:
'''
@@ static int bpf_mptcp_pm_btf_struct_access(struct bpf_verifier_log *log,
case offsetof(struct mptcp_pm_addr_entry, addr.port):
end = offsetofend(struct mptcp_pm_addr_entry, addr.port);
break;
#if IS_ENABLED(CONFIG_MPTCP_IPV6)
case offsetof(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[0]):
end = offsetofend(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[0]);
break;
case offsetof(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[1]):
end = offsetofend(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[1]);
break;
case offsetof(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[2]):
end = offsetofend(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[2]);
break;
case offsetof(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[3]):
end = offsetofend(struct mptcp_pm_addr_entry, addr.addr6.s6_addr32[3]);
break;
#else
case offsetof(struct mptcp_pm_addr_entry, addr.addr.s_addr):
end = offsetofend(struct mptcp_pm_addr_entry, addr.addr.s_addr);
break;
#endif
'''
But if there's a sock_kmemdup() helper, it will become much simpler,
only need to call kfunc sock_kmemdup() instead in BPF.
So this patchset adds this new helper and uses it in several places.
[1]
https://lore.kernel.org/mptcp/cover.1738924875.git.tanggeliang@kylinos.cn/
====================
Link: https://patch.msgid.link/cover.1740735165.git.tanggeliang@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of using sock_kmalloc() to allocate an address
entry "e" and then immediately duplicate the input "entry"
to it, the newly added sock_kmemdup() helper can be used in
mptcp_userspace_pm_append_new_local_addr() to simplify the code.
More importantly, the code "*e = *entry;" that assigns "entry"
to "e" is not easy to implemented in BPF if we use the same code
to implement an append_new_local_addr() helper of a BFP path
manager. This patch avoids this type of memory assignment
operation.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/3e5a307aed213038a87e44ff93b5793229b16279.1740735165.git.tanggeliang@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of using sock_kmalloc() to allocate an ip_options and then
immediately duplicate another ip_options to the newly allocated one in
ipv6_dup_options(), mptcp_copy_ip_options() and sctp_v4_copy_ip_options(),
the newly added sock_kmemdup() helper can be used to simplify the code.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/91ae749d66600ec6fb679e0e518fda6acb5c3e6f.1740735165.git.tanggeliang@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds the sock version of kmemdup() helper, named sock_kmemdup(),
to duplicate the input "src" memory block using the socket's option memory
buffer.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/f828077394c7d1f3560123497348b438c875b510.1740735165.git.tanggeliang@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
tcp: misc changes
Minor changes, following recent changes in TCP stack.
====================
Link: https://patch.msgid.link/20250301201424.2046477-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove one indentation level.
Use max_t() and clamp() macros.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250301201424.2046477-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 8d52da23b6c6 ("tcp: Defer ts_recent changes
until req is owned"), req->ts_recent is not changed anymore.
It is set once in tcp_openreq_init(), bpf_sk_assign_tcp_reqsk()
or cookie_tcp_reqsk_alloc() before the req can be seen by other
cpus/threads.
This completes the revert of eba20811f326 ("tcp: annotate
data-races around tcp_rsk(req)->ts_recent").
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250301201424.2046477-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp4_check_fraglist_gro(), tcp6_check_fraglist_gro(),
udp4_gro_lookup_skb() and udp6_gro_lookup_skb()
assume RCU is held so that the net structure does not disappear.
Use dev_net_rcu() instead of dev_net() to get LOCKDEP support.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250301201424.2046477-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TCP uses of dev_net() are under RCU protection, change them
to dev_net_rcu() to get LOCKDEP support.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250301201424.2046477-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
