| Age | Commit message (Collapse) | Author |
|---|
|
Enable InterTouch mode on Dynabook Portege X30L-G by adding "TOS01f6" to
the list of SMBus-enabled variants.
Reported-by: Xuntao Chi <chotaotao1qaz2wsx@gmail.com>
Tested-by: Xuntao Chi <chotaotao1qaz2wsx@gmail.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/PN3PR01MB959786E4AC797160CDA93012B888A@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
[ 5.989588] psmouse serio1: synaptics: Your touchpad (PNP: TOS0213 PNP0f03) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 6.039923] psmouse serio1: synaptics: Touchpad model: 1, fw: 9.32, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x52d884, board id: 3322, fw id: 2658004
The board is labelled TM3322.
Present on the Toshiba / Dynabook Portege X30-D and possibly others.
Confirmed working well with psmouse.synaptics_intertouch=1 and local build.
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/PN3PR01MB9597711E7933A08389FEC31DB888A@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The kernel reports that the touchpad for this device can support
SMBus mode.
Reported-by: jt <enopatch@gmail.com>
Link: https://lore.kernel.org/r/iys5dbv3ldddsgobfkxldazxyp54kay4bozzmagga6emy45jop@2ebvuxgaui4u
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
We frequently use 'bcachefs list_journal -a' for debugging, as it
provides a record of all btree transactions, and a history of what
happened.
But it's not so useful if we immediately discard journal buckets right
after they're no longer dirty.
This tweaks journal reclaim to only discard when we're low on space,
keeping the journal mostly un-discarded.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When we go emergency read-only, make sure we do a final write_super() to
persist counters and error counts - this can be critical for piecing
together what fsck was doing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
These just indicate that we're shutting down.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We often filter out EROFS errors to avoid log spew after an emergency
shutdown - journal_shutdown is just another emergency shutdown error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
A pre-existing valid cfid returned from find_or_create_cached_dir might
race with a lease break, meaning open_cached_dir doesn't consider it
valid, and thinks it's newly-constructed. This leaks a dentry reference
if the allocation occurs before the queued lease break work runs.
Avoid the race by extending holding the cfid_list_lock across
find_or_create_cached_dir and when the result is checked.
Cc: stable@vger.kernel.org
Reviewed-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In 'lookup_or_create_module_kobject()', an internal kobject is created
using 'module_ktype'. So call to 'kobject_put()' on error handling
path causes an attempt to use an uninitialized completion pointer in
'module_kobject_release()'. In this scenario, we just want to release
kobject without an extra synchronization required for a regular module
unloading process, so adding an extra check whether 'complete()' is
actually required makes 'kobject_put()' safe.
Reported-by: syzbot+7fb8a372e1f6add936dd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7fb8a372e1f6add936dd
Fixes: 942e443127e9 ("module: Fix mod->mkobj.kobj potentially freed too early")
Cc: stable@vger.kernel.org
Suggested-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20250507065044.86529-1-dmantipov@yandex.ru
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Add a new reviewer, Hongbo Li, for better community development
- Fix an I/O hang out of file-backed mounts
- Address a rare data corruption caused by concurrent I/Os on the same
deduplicated compressed data
- Minor cleanup
* tag 'erofs-for-6.15-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: ensure the extra temporary copy is valid for shortened bvecs
erofs: remove unused enum type
fs/erofs/fileio: call erofs_onlinefolio_split() after bio_add_folio()
MAINTAINERS: erofs: add myself as reviewer
|
|
Device flags could be updated in the meantime while MGMT_OP_ADD_DEVICE
is pending on hci_update_passive_scan_sync so instead of setting the
current_flags as cmd->user_data just do a lookup using
hci_conn_params_lookup and use the latest stored flags.
Fixes: a182d9c84f9c ("Bluetooth: MGMT: Fix Add Device to responding before completing")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
BPF programs may call next() and destroy() on BPF iterators even after new()
returns an error value (e.g. bpf_for_each() macro ignores error returns from
new()). bpf_iter_scx_dsq_new() could leave the iterator in an uninitialized
state after an error return causing bpf_iter_scx_dsq_next() to dereference
garbage data. Make bpf_iter_scx_dsq_new() always clear $kit->dsq so that
next() and destroy() become noops.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 650ba21b131e ("sched_ext: Implement DSQ iterator")
Cc: stable@vger.kernel.org # v6.12+
Acked-by: Andrea Righi <arighi@nvidia.com>
|
|
Marek reported seeing a NULL pointer fault in the xenbus_thread
callstack:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: e030:__wake_up_common+0x4c/0x180
Call Trace:
<TASK>
__wake_up_common_lock+0x82/0xd0
process_msg+0x18e/0x2f0
xenbus_thread+0x165/0x1c0
process_msg+0x18e is req->cb(req). req->cb is set to xs_wake_up(), a
thin wrapper around wake_up(), or xenbus_dev_queue_reply(). It seems
like it was xs_wake_up() in this case.
It seems like req may have woken up the xs_wait_for_reply(), which
kfree()ed the req. When xenbus_thread resumes, it faults on the zero-ed
data.
Linux Device Drivers 2nd edition states:
"Normally, a wake_up call can cause an immediate reschedule to happen,
meaning that other processes might run before wake_up returns."
... which would match the behaviour observed.
Change to keeping two krefs on each request. One for the caller, and
one for xenbus_thread. Each will kref_put() when finished, and the last
will free it.
This use of kref matches the description in
Documentation/core-api/kref.rst
Link: https://lore.kernel.org/xen-devel/ZO0WrR5J0xuwDIxW@mail-itl/
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Fixes: fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250506210935.5607-1-jason.andryuk@amd.com>
|
|
Make xenbus_init() allow a non-local xenstore for a PVH dom0 - it is
currently forced to XS_LOCAL. With Hyperlaunch booting dom0 and a
xenstore stubdom, dom0 can be handled as a regular XS_HVM following the
late init path.
Ideally we'd drop the use of xen_initial_domain() and just check for the
event channel instead. However, ARM has a xen,enhanced no-xenstore
mode, where the event channel and PFN would both be 0. Retain the
xen_initial_domain() check, and use that for an additional check when
the event channel is 0.
Check the full 64bit HVM_PARAM_STORE_EVTCHN value to catch the off
chance that high bits are set for the 32bit event channel.
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Change-Id: I5506da42e4c6b8e85079fefb2f193c8de17c7437
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250506204456.5220-1-jason.andryuk@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Some Kconfig dependency fixes"
* tag 'media/v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: cec: tda9950: add back i2c dependency
media: i2c: lt6911uxe: add two selects to Kconfig
media: platform: synopsys: VIDEO_SYNOPSYS_HDMIRX should depend on ARCH_ROCKCHIP
media: i2c: lt6911uxe: Fix Kconfig dependencies:
media: vivid: fix FB dependency
|
|
Multishot normally uses io_req_post_cqe() to post completions, but when
stopping it, it may finish up with a deferred completion. This is fine,
except if another multishot event triggers before the deferred completions
get flushed. If this occurs, then CQEs may get reordered in the CQ ring,
as new multishot completions get posted before the deferred ones are
flushed. This can cause confusion on the application side, if strict
ordering is required for the use case.
When multishot posting via io_req_post_cqe(), flush any pending deferred
completions first, if any.
Cc: stable@vger.kernel.org # 6.1+
Reported-by: Norman Maurer <norman_maurer@apple.com>
Reported-by: Christian Mazakas <christian.mazakas@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Xen swiotlb support was missed when the patch set starting with
4ab5f8ec7d71 ("mm/slab: decouple ARCH_KMALLOC_MINALIGN from
ARCH_DMA_MINALIGN") was merged.
When running Xen on iMX8QXP, a SoC without IOMMU, the effect was that USB
transfers ended up corrupted when there was more than one URB inflight at
the same time.
Add a call to dma_kmalloc_needs_bounce() to make sure that allocations too
small for DMA get bounced via swiotlb.
Closes: https://lore.kernel.org/linux-usb/ab2776f0-b838-4cf6-a12a-c208eb6aad59@actia.se/
Fixes: 4ab5f8ec7d71 ("mm/slab: decouple ARCH_KMALLOC_MINALIGN from ARCH_DMA_MINALIGN")
Cc: stable@kernel.org # v6.5+
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250502114043.1968976-2-john.ernberg@actia.se>
|
|
The wlan_ctrl_by_user detection was introduced by commit a50bd128f28c
("asus-wmi: record wlan status while controlled by userapp").
Quoting from that commit's commit message:
"""
When you call WMIMethod(DSTS, 0x00010011) to get WLAN status, it may return
(1) 0x00050001 (On)
(2) 0x00050000 (Off)
(3) 0x00030001 (On)
(4) 0x00030000 (Off)
(5) 0x00000002 (Unknown)
(1), (2) means that the model has hardware GPIO for WLAN, you can call
WMIMethod(DEVS, 0x00010011, 1 or 0) to turn WLAN on/off.
(3), (4) means that the model doesn’t have hardware GPIO, you need to use
API or driver library to turn WLAN on/off, and call
WMIMethod(DEVS, 0x00010012, 1 or 0) to set WLAN LED status.
After you set WLAN LED status, you can see the WLAN status is changed with
WMIMethod(DSTS, 0x00010011). Because the status is recorded lastly
(ex: Windows), you can use it for synchronization.
(5) means that the model doesn’t have WLAN device.
WLAN is the ONLY special case with upper rule.
"""
The wlan_ctrl_by_user flag should be set on 0x0003000? ((3), (4) above)
return values, but the flag mistakenly also gets set on laptops with
0x0005000? ((1), (2)) return values. This is causing rfkill problems on
laptops where 0x0005000? is returned.
Fix the check to only set the wlan_ctrl_by_user flag for 0x0003000?
return values.
Fixes: a50bd128f28c ("asus-wmi: record wlan status while controlled by userapp")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219786
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250501131702.103360-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
(GX4HRXL)
MECHREVO Wujie 14XA (GX4HRXL) wakes up immediately after s2idle entry.
This happens regardless of whether the laptop is plugged into AC power,
or whether any peripheral is plugged into the laptop.
Similar to commit a55bdad5dfd1 ("platform/x86/amd/pmc: Disable keyboard
wakeup on AMD Framework 13"), the MECHREVO Wujie 14XA wakes up almost
instantly after s2idle suspend entry (IRQ1 is the keyboard):
2025-04-18 17:23:57,588 DEBUG: PM: Triggering wakeup from IRQ 9
2025-04-18 17:23:57,588 DEBUG: PM: Triggering wakeup from IRQ 1
Add this model to the spurious_8042 quirk to workaround this.
This patch does not affect the wake-up function of the built-in keyboard.
Because the firmware of this machine adds an insurance for keyboard
wake-up events, as it always triggers an additional IRQ 9 to wake up the
system.
Suggested-by: Mingcong Bai <jeffbai@aosc.io>
Suggested-by: Xinhui Yang <cyan@cyano.uk>
Suggested-by: Rong Zhang <i@rong.moe>
Fixes: a55bdad5dfd1 ("platform/x86/amd/pmc: Disable keyboard wakeup on AMD Framework 13")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4166
Cc: Mario Limonciello <mario.limonciello@amd.com>
Link: https://zhuanldan.zhihu.com/p/730538041
Tested-by: Yemu Lu <prcups@krgm.moe>
Signed-off-by: Runhua He <hua@aosc.io>
Link: https://lore.kernel.org/r/20250507100103.995395-1-hua@aosc.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Change get_thinkpad_model_data() to check for additional vendor name
"NEC" in order to support NEC Lavie X1475JAS notebook (and perhaps
more).
The reason of this works with minimal changes is because NEC Lavie
X1475JAS is a Thinkpad inside. ACPI dumps reveals its OEM ID to be
"LENOVO", BIOS version "R2PET30W" matches typical Lenovo BIOS version,
the existence of HKEY of LEN0268, with DMI fw string is "R2PHT24W".
I compiled and tested with my own machine, attached the dmesg
below as proof of work:
[ 6.288932] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 6.288937] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 6.288938] thinkpad_acpi: ThinkPad BIOS R2PET30W (1.11 ), EC R2PHT24W
[ 6.307000] thinkpad_acpi: radio switch found; radios are enabled
[ 6.307030] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 6.307033] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 6.320322] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 6.371963] thinkpad_acpi: secondary fan control detected & enabled
[ 6.391922] thinkpad_acpi: battery 1 registered (start 0, stop 85, behaviours: 0x7)
[ 6.398375] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input13
Signed-off-by: John Chau <johnchau@0atlas.com>
Link: https://lore.kernel.org/r/20250504165513.295135-1-johnchau@0atlas.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
With commit bcb5d6c76903 ("s390/pci: introduce lock to synchronize state
of zpci_dev's") the code to ignore power off of a PF that has child VFs
was changed from a direct return to a goto to the unlock and
pci_dev_put() section. The change however left the existing pci_dev_put()
untouched resulting in a doubple put. This can subsequently cause a use
after free if the struct pci_dev is released in an unexpected state.
Fix this by removing the extra pci_dev_put().
Cc: stable@vger.kernel.org
Fixes: bcb5d6c76903 ("s390/pci: introduce lock to synchronize state of zpci_dev's")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The zpci_create_device() function returns an error pointer that needs to
be checked before dereferencing it as a struct zpci_dev pointer. Add the
missing check in __clp_add() where it was missed when adding the
scan_list in the fixed commit. Simply not adding the device to the scan
list results in the previous behavior.
Cc: stable@vger.kernel.org
Fixes: 0467cdde8c43 ("s390/pci: Sort PCI functions prior to creating virtual busses")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
UDF maintains total length of all extents in i_lenExtents. Generally we
keep extent lengths (and thus i_lenExtents) block aligned because it
makes the file appending logic simpler. However the standard mandates
that the inode size must match the length of all extents and thus we
trim the last extent when closing the file. To catch possible bugs we
also verify that i_lenExtents matches i_size when evicting inode from
memory. Commit b405c1e58b73 ("udf: refactor udf_next_aext() to handle
error") however broke the code updating i_lenExtents and thus
udf_evict_inode() ended up spewing lots of errors about incorrectly
sized extents although the extents were actually sized properly. Fix the
updating of i_lenExtents to silence the errors.
Fixes: b405c1e58b73 ("udf: refactor udf_next_aext() to handle error")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
I found this simple bug while preparing some patches for pKVM.
AFAICT, it should be harmless (besides crashing the kernel if it
was misbehaving)
Fixes: e94a7dea2972 ("KVM: arm64: Move host page ownership tracking to the hyp vmemmap")
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20250501162450.2784043-1-smostafa@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
HCRX_HOST_FLAGS, like most of these hardcoded setups, are not
a good match for options that can be selectively enabled or
disabled.
Nothing but the early setup is relying on it now, so kill the
macro and move the bag of bits where they belong.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250430105916.3815157-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Rather than restoring HCRX_EL2 to a fixed value on vcpu exit,
perform a full save/restore of the register, ensuring that
we don't lose bits that would have been set at some point in
the host kernel lifetime, such as the GCSEn bit.
Fixes: ff5181d8a2a82 ("arm64/gcs: Provide basic EL2 setup to allow GCS usage at EL0 and EL1")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250430105916.3815157-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The original nvme subsystem design didn't have a CONNECTING state; the
state machine allowed transitions from RESETTING to LIVE directly.
With the introduction of nvme fabrics the CONNECTING state was
introduce. Over time the nvme-pci started to use the CONNECTING state as
well.
Eventually, a bug fix for the nvme-fc started to depend that the only
valid transition to LIVE was from CONNECTING. Though this change didn't
update the firmware update handler which was still depending on
RESETTING to LIVE transition.
The simplest way to address it for the time being is to switch into
CONNECTING state before going to LIVE state.
Fixes: d2fe192348f9 ("nvme: only allow entering LIVE from CONNECTING state")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Closes: https://lore.kernel.org/all/0134ea15-8d5f-41f7-9e9a-d7e6d82accaa@roeck-us.net
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of fixes:
* iwlwifi: add two missing device entries
* cfg80211: fix a potential out-of-bounds access
* mac80211: fix format of TID to link mapping action frames
* tag 'wireless-2025-05-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: add support for Killer on MTL
wifi: mac80211: fix the type of status_code for negotiated TID to Link Mapping
wifi: cfg80211: fix out-of-bounds access during multi-link element defragmentation
====================
Link: https://patch.msgid.link/20250506203506.158818-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-05-06
The first patch is by Antonios Salios and adds a missing
spin_lock_init() to the m_can driver.
The next 3 patches are by me and fix the unregistration order in the
mcp251xfd, rockchip_canfd and m_can driver.
The last patch is by Oliver Hartkopp and fixes RCU and BH
locking/handling in the CAN gw protocol.
* tag 'linux-can-fixes-for-6.15-20250506' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: gw: fix RCU/BH usage in cgw_create_job()
can: mcan: m_can_class_unregister(): fix order of unregistration calls
can: rockchip_canfd: rkcanfd_remove(): fix order of unregistration calls
can: mcp251xfd: mcp251xfd_remove(): fix order of unregistration calls
can: mcp251xfd: fix TDC setting for low data bit rates
can: m_can: m_can_class_allocate_dev(): initialize spin lock on device probe
====================
Link: https://patch.msgid.link/20250506135939.652543-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Accidentally spotted while trying to understand what else needs
to be renamed to netif_ prefix. Most of the calls to dev_set_promiscuity
are adjacent to dev_set_allmulti or dev_disable_lro so it should
be safe to add the lock. Note that new netif_set_promiscuity is
currently unused, the locked paths call __dev_set_promiscuity directly.
Fixes: ad7c7b2172c3 ("net: hold netdev instance lock during sysfs operations")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250506011919.2882313-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When compressed data deduplication is enabled, multiple logical extents
may reference the same compressed physical cluster.
The previous commit 94c43de73521 ("erofs: fix wrong primary bvec
selection on deduplicated extents") already avoids using shortened
bvecs. However, in such cases, the extra temporary buffers also
need to be preserved for later use in z_erofs_fill_other_copies() to
to prevent data corruption.
IOWs, extra temporary buffers have to be retained not only due to
varying start relative offsets (`pageofs_out`, as indicated by
`pcl->multibases`) but also because of shortened bvecs.
android.hardware.graphics.composer@2.1.so : 270696 bytes
0: 0.. 204185 | 204185 : 628019200.. 628084736 | 65536
-> 1: 204185.. 225536 | 21351 : 544063488.. 544129024 | 65536
2: 225536.. 270696 | 45160 : 0.. 0 | 0
com.android.vndk.v28.apex : 93814897 bytes
...
364: 53869896..54095257 | 225361 : 543997952.. 544063488 | 65536
-> 365: 54095257..54309344 | 214087 : 544063488.. 544129024 | 65536
366: 54309344..54514557 | 205213 : 544129024.. 544194560 | 65536
...
Both 204185 and 54095257 have the same start relative offset of 3481,
but the logical page 55 of `android.hardware.graphics.composer@2.1.so`
ranges from 225280 to 229632, forming a shortened bvec [225280, 225536)
that cannot be used for decompressing the range from 54095257 to
54309344 of `com.android.vndk.v28.apex`.
Since `pcl->multibases` is already meaningless, just mark `be->keepxcpy`
on demand for simplicity.
Again, this issue can only lead to data corruption if `-Ededupe` is on.
Fixes: 94c43de73521 ("erofs: fix wrong primary bvec selection on deduplicated extents")
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250506101850.191506-1-hsiangkao@linux.alibaba.com
|
|
__qdisc_destroy() calls into various qdiscs .destroy() op, which in turn
can call .ndo_setup_tc(), which requires the netdev instance lock.
This commit extends the critical section in
unregister_netdevice_many_notify() to cover dev_shutdown() (and
dev_tcx_uninstall() as a side-effect) and acquires the netdev instance
lock in __dev_change_net_namespace() for the other dev_shutdown() call.
This should now guarantee that for all qdisc ops, the netdev instance
lock is held during .ndo_setup_tc().
Fixes: a0527ee2df3f ("net: hold netdev instance lock during qdisc ndo_setup_tc")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250505194713.1723399-1-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use Device Serial Number instead of PCI bus/device/function for
the index of struct ice_adapter.
Functions on the same physical device should point to the very same
ice_adapter instance, but with two PFs, when at least one of them is
PCI-e passed-through to a VM, it is no longer the case - PFs will get
seemingly random PCI BDF values, and thus indices, what finally leds to
each of them being on their own instance of ice_adapter. That causes them
to don't attempt any synchronization of the PTP HW clock usage, or any
other future resources.
DSN works nicely in place of the index, as it is "immutable" in terms of
virtualization.
Fixes: 0e2bddf9e5f9 ("ice: add ice_adapter for shared data across PFs on the same NIC")
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250505161939.2083581-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Calling core::fmt::write() from rust code while FineIBT is enabled
results in a kernel panic:
[ 4614.199779] kernel BUG at arch/x86/kernel/cet.c:132!
[ 4614.205343] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 4614.211781] CPU: 2 UID: 0 PID: 6057 Comm: dmabuf_dump Tainted: G U O 6.12.17-android16-0-g6ab38c534a43 #1 9da040f27673ec3945e23b998a0f8bd64c846599
[ 4614.227832] Tainted: [U]=USER, [O]=OOT_MODULE
[ 4614.241247] RIP: 0010:do_kernel_cp_fault+0xea/0xf0
...
[ 4614.398144] RIP: 0010:_RNvXs5_NtNtNtCs3o2tGsuHyou_4core3fmt3num3impyNtB9_7Display3fmt+0x0/0x20
[ 4614.407792] Code: 48 f7 df 48 0f 48 f9 48 89 f2 89 c6 5d e9 18 fd ff ff 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 41 81 ea 14 61 af 2c 74 03 0f 0b 90 <66> 0f 1f 00 55 48 89 e5 48 89 f2 48 8b 3f be 01 00 00 00 5d e9 e7
[ 4614.428775] RSP: 0018:ffffb95acfa4ba68 EFLAGS: 00010246
[ 4614.434609] RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000000
[ 4614.442587] RDX: 0000000000000007 RSI: ffffb95acfa4ba70 RDI: ffffb95acfa4bc88
[ 4614.450557] RBP: ffffb95acfa4bae0 R08: ffff0a00ffffff05 R09: 0000000000000070
[ 4614.458527] R10: 0000000000000000 R11: ffffffffab67eaf0 R12: ffffb95acfa4bcc8
[ 4614.466493] R13: ffffffffac5d50f0 R14: 0000000000000000 R15: 0000000000000000
[ 4614.474473] ? __cfi__RNvXs5_NtNtNtCs3o2tGsuHyou_4core3fmt3num3impyNtB9_7Display3fmt+0x10/0x10
[ 4614.484118] ? _RNvNtCs3o2tGsuHyou_4core3fmt5write+0x1d2/0x250
This happens because core::fmt::write() calls
core::fmt::rt::Argument::fmt(), which currently has CFI disabled:
library/core/src/fmt/rt.rs:
171 // FIXME: Transmuting formatter in new and indirectly branching to/calling
172 // it here is an explicit CFI violation.
173 #[allow(inline_no_sanitize)]
174 #[no_sanitize(cfi, kcfi)]
175 #[inline]
176 pub(super) unsafe fn fmt(&self, f: &mut Formatter<'_>) -> Result {
This causes a Control Protection exception, because FineIBT has sealed
off the original function's endbr64.
This makes rust currently incompatible with FineIBT. Add a Kconfig
dependency that prevents FineIBT from getting turned on by default
if rust is enabled.
[ Rust 1.88.0 (scheduled for 2025-06-26) should have this fixed [1],
and thus we relaxed the condition with Rust >= 1.88.
When `objtool` lands checking for this with e.g. [2], the plan is
to ideally run that in upstream Rust's CI to prevent regressions
early [3], since we do not control `core`'s source code.
Alice tested the Rust PR backported to an older compiler.
Peter would like that Rust provides a stable `core` which can be
pulled into the kernel: "Relying on that much out of tree code is
'unfortunate'".
- Miguel ]
Signed-off-by: Paweł Anikiel <panikiel@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://github.com/rust-lang/rust/pull/139632 [1]
Link: https://lore.kernel.org/rust-for-linux/20250410154556.GB9003@noisy.programming.kicks-ass.net/ [2]
Link: https://github.com/rust-lang/rust/pull/139632#issuecomment-2801950873 [3]
Link: https://lore.kernel.org/r/20250410115420.366349-1-panikiel@google.com
Link: https://lore.kernel.org/r/att0-CANiq72kjDM0cKALVy4POEzhfdT4nO7tqz0Pm7xM+3=_0+L1t=A@mail.gmail.com
[ Reduced splat. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Starting with Rust 1.88.0 (expected 2025-06-26) [1], `rustc` may move
back the `uninlined_format_args` to `style` from `pedantic` (it was
there waiting for rust-analyzer suppotr), and thus we will start to see
lints like:
warning: variables can be used directly in the `format!` string
--> rust/macros/kunit.rs:105:37
|
105 | let kunit_wrapper_fn_name = format!("kunit_rust_wrapper_{}", test);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#uninlined_format_args
help: change this to
|
105 - let kunit_wrapper_fn_name = format!("kunit_rust_wrapper_{}", test);
105 + let kunit_wrapper_fn_name = format!("kunit_rust_wrapper_{test}");
There is even a case that is a pure removal:
warning: variables can be used directly in the `format!` string
--> rust/macros/module.rs:51:13
|
51 | format!("{field}={content}\0", field = field, content = content)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#uninlined_format_args
help: change this to
|
51 - format!("{field}={content}\0", field = field, content = content)
51 + format!("{field}={content}\0")
The lints all seem like nice cleanups, thus just apply them.
We may want to disable `allow-mixed-uninlined-format-args` in the future.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust-clippy/pull/14160 [1]
Acked-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250502140237.1659624-6-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
configuration
Starting with Rust 1.88.0 (expected 2025-06-26) [1], Clippy may start
warning about paths that do not resolve in the `disallowed_macros`
configuration:
warning: `kernel::dbg` does not refer to an existing macro
--> .clippy.toml:10:5
|
10 | { path = "kernel::dbg", reason = "the `dbg!` macro is intended as a debugging tool" },
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This is a lint we requested at [2], due to the trouble debugging
the lint due to false negatives (e.g. [3]), which we use to emulate
`clippy::dbg_macro` [4]. See commit 8577c9dca799 ("rust: replace
`clippy::dbg_macro` with `disallowed_macros`") for more details.
Given the false negatives are not resolved yet, it is expected that
Clippy complains about not finding this macro.
Thus, until the false negatives are fixed (and, even then, probably we
will need to wait for the MSRV to raise enough), use the escape hatch
to allow an invalid path.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust-clippy/pull/14397 [1]
Link: https://github.com/rust-lang/rust-clippy/issues/11432 [2]
Link: https://github.com/rust-lang/rust-clippy/issues/11431 [3]
Link: https://github.com/rust-lang/rust-clippy/issues/11303 [4]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250502140237.1659624-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Starting with Rust 1.88.0 (expected 2025-06-26) [1][2], `rustc` may
introduce a new lint that catches unnecessary transmutes, e.g.:
error: unnecessary transmute
--> rust/uapi/uapi_generated.rs:23242:18
|
23242 | unsafe { ::core::mem::transmute(self._bitfield_1.get(0usize, 1u8) as u8) }
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace this with: `(self._bitfield_1.get(0usize, 1u8) as u8 == 1)`
|
= note: `-D unnecessary-transmutes` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(unnecessary_transmutes)]`
There are a lot of them (at least 300), but luckily they are all in
`bindgen`-generated code.
Thus clean all up by allowing it there.
Since unknown lints trigger a lint itself in older compilers, do it
conditionally so that we can keep the `unknown_lints` lint enabled.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/136083 [1]
Link: https://github.com/rust-lang/rust/issues/136067 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250502140237.1659624-4-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Starting with Rust 1.87.0 (expected 2025-05-15) [1], Clippy may expand
the `ptr_eq` lint, e.g.:
error: use `core::ptr::eq` when comparing raw pointers
--> rust/kernel/list.rs:438:12
|
438 | if self.first == item {
| ^^^^^^^^^^^^^^^^^^ help: try: `core::ptr::eq(self.first, item)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ptr_eq
= note: `-D clippy::ptr-eq` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::ptr_eq)]`
It is expected that a PR to relax the lint will be backported [2] by
the time Rust 1.87.0 releases, since the lint was considered too eager
(at least by default) [3].
Thus allow the lint temporarily just in case.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust-clippy/pull/14339 [1]
Link: https://github.com/rust-lang/rust-clippy/pull/14526 [2]
Link: https://github.com/rust-lang/rust-clippy/issues/14525 [3]
Link: https://lore.kernel.org/r/20250502140237.1659624-3-ojeda@kernel.org
[ Converted to `allow`s since backport was confirmed. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Starting with Rust 1.87.0 (expected 2025-05-15), `objtool` may report:
rust/core.o: warning: objtool: _R..._4core9panicking9panic_fmt() falls
through to next function _R..._4core9panicking18panic_nounwind_fmt()
rust/core.o: warning: objtool: _R..._4core9panicking18panic_nounwind_fmt()
falls through to next function _R..._4core9panicking5panic()
The reason is that `rust_begin_unwind` is now mangled:
_R..._7___rustc17rust_begin_unwind
Thus add the mangled one to the list so that `objtool` knows it is
actually `noreturn`.
See commit 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Alternatively, we could remove the fixed one in `noreturn.h` and relax
this test to cover both, but it seems best to be strict as long as we can.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250502140237.1659624-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes
Pull a Rockchip clk driver fix from Heiko Stuebner:
Actually define the gate-clk for the otg-phy on rk3576 to make the nvmem-
support work, that was merged for 6.15.
* tag 'v6.15-rockchip-clkfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: rk3576: define clk_otp_phy_g
|
|
For now, we need another entry for these devices, this
will be changed completely for 6.16.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219926
Link: https://patch.msgid.link/20250506214258.2efbdc9e9a82.I31915ec252bd1c74bd53b89a0e214e42a74b6f2e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The status code should be type of __le16.
Fixes: 83e897a961b8 ("wifi: ieee80211: add definitions for negotiated TID to Link map")
Fixes: 8f500fbc6c65 ("wifi: mac80211: process and save negotiated TID to Link mapping request")
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20250505081946.3927214-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
defragmentation
Currently during the multi-link element defragmentation process, the
multi-link element length added to the total IEs length when calculating
the length of remaining IEs after the multi-link element in
cfg80211_defrag_mle(). This could lead to out-of-bounds access if the
multi-link element or its corresponding fragment elements are the last
elements in the IEs buffer.
To address this issue, correctly calculate the remaining IEs length by
deducting the multi-link element end offset from total IEs end offset.
Cc: stable@vger.kernel.org
Fixes: 2481b5da9c6b ("wifi: cfg80211: handle BSS data contained in ML probe responses")
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://patch.msgid.link/20250424-fix_mle_defragmentation_oob_access-v1-1-84412a1743fa@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The vfio-pci huge_fault handler doesn't make any attempt to insert a
mapping containing the faulting address, it only inserts mappings if the
faulting address and resulting pfn are aligned. This works in a lot of
cases, particularly in conjunction with QEMU where DMA mappings linearly
fault the mmap. However, there are configurations where we don't get
that linear faulting and pages are faulted on-demand.
The scenario reported in the bug below is such a case, where the physical
address width of the CPU is greater than that of the IOMMU, resulting in a
VM where guest firmware has mapped device MMIO beyond the address width of
the IOMMU. In this configuration, the MMIO is faulted on demand and
tracing indicates that occasionally the faults generate a VM_FAULT_OOM.
Given the use case, this results in a "error: kvm run failed Bad address",
killing the VM.
The host is not under memory pressure in this test, therefore it's
suspected that VM_FAULT_OOM is actually the result of a NULL return from
__pte_offset_map_lock() in the get_locked_pte() path from insert_pfn().
This suggests a potential race inserting a pte concurrent to a pmd, and
maybe indicates some deficiency in the mm layer properly handling such a
case.
Nevertheless, Peter noted the inconsistency of vfio-pci's huge_fault
handler where our mapping granularity depends on the alignment of the
faulting address relative to the order rather than aligning the faulting
address to the order to more consistently insert huge mappings. This
change not only uses the page tables more consistently and efficiently, but
as any fault to an aligned page results in the same mapping, the race
condition suspected in the VM_FAULT_OOM is avoided.
Reported-by: Adolfo <adolfotregosa@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220057
Fixes: 09dfc8a5f2ce ("vfio/pci: Fallback huge faults for unaligned pfn")
Cc: stable@vger.kernel.org
Tested-by: Adolfo <adolfotregosa@gmail.com>
Co-developed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20250502224035.3183451-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Call Trace:
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
strlen+0x93/0xa0 lib/string.c:420
__fortify_strlen include/linux/fortify-string.h:268 [inline]
get_kobj_path_length lib/kobject.c:118 [inline]
kobject_get_path+0x3f/0x2a0 lib/kobject.c:158
kobject_uevent_env+0x289/0x1870 lib/kobject_uevent.c:545
ib_register_device drivers/infiniband/core/device.c:1472 [inline]
ib_register_device+0x8cf/0xe00 drivers/infiniband/core/device.c:1393
rxe_register_device+0x275/0x320 drivers/infiniband/sw/rxe/rxe_verbs.c:1552
rxe_net_add+0x8e/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:550
rxe_newlink+0x70/0x190 drivers/infiniband/sw/rxe/rxe.c:225
nldev_newlink+0x3a3/0x680 drivers/infiniband/core/nldev.c:1796
rdma_nl_rcv_msg+0x387/0x6e0 drivers/infiniband/core/netlink.c:195
rdma_nl_rcv_skb.constprop.0.isra.0+0x2e5/0x450
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
____sys_sendmsg+0xa95/0xc70 net/socket.c:2566
___sys_sendmsg+0x134/0x1d0 net/socket.c:2620
__sys_sendmsg+0x16d/0x220 net/socket.c:2652
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This problem is similar to the problem that the
commit 1d6a9e7449e2 ("RDMA/core: Fix use-after-free when rename device name")
fixes.
The root cause is: the function ib_device_rename() renames the name with
lock. But in the function kobject_uevent(), this name is accessed without
lock protection at the same time.
The solution is to add the lock protection when this name is accessed in
the function kobject_uevent().
Fixes: 779e0bf47632 ("RDMA/core: Do not indicate device ready when device enablement fails")
Link: https://patch.msgid.link/r/20250506151008.75701-1-yanjun.zhu@linux.dev
Reported-by: syzbot+e2ce9e275ecc70a30b72@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e2ce9e275ecc70a30b72
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
set_high_memory() touches arch_zone_lowest_possible_pfn which is
marked as __initdata, which creates a section mismatch.
Since the only user of the function is free_area_init() which is also marked
as __init, mark set_high_memory() as __init as well.
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505060901.Qcs06UoB-lkp@intel.com/
Link: https://lore.kernel.org/r/20250506111012.108743-1-osalvador@suse.de
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- revert device path canonicalization, this does not work as intended
with namespaces and is not reliable in all setups
- fix crash in scrub when checksum tree is not valid, e.g. when mounted
with rescue=ignoredatacsums
- fix crash when tracepoint btrfs_prelim_ref_insert is enabled
- other minor fixups:
- open code folio_index(), meant to be used in MM code
- use matching type for sizeof in compression allocation
* tag 'for-6.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: open code folio_index() in btree_clear_folio_dirty_tag()
Revert "btrfs: canonicalize the device path before adding it"
btrfs: avoid NULL pointer dereference if no valid csum tree
btrfs: handle empty eb->folios in num_extent_folios()
btrfs: correct the order of prelim_ref arguments in btrfs__prelim_ref
btrfs: compression: adjust cb->compressed_folios allocation type
|
|
With the possibility of intra-mode BHI via cBPF, complete mitigation for
BHI is to use IBHF (history fence) instruction with BHI_DIS_S set. Since
this new instruction is only available in 64-bit mode, setting BHI_DIS_S in
32-bit mode is only a partial mitigation.
Do not set BHI_DIS_S in 32-bit mode so as to avoid reporting misleading
mitigated status. With this change IBHF won't be used in 32-bit mode, also
remove the CONFIG_X86_64 check from emit_spectre_bhb_barrier().
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
Classic BPF programs can be run by unprivileged users, allowing
unprivileged code to execute inside the kernel. Attackers can use this to
craft branch history in kernel mode that can influence the target of
indirect branches.
BHI_DIS_S provides user-kernel isolation of branch history, but cBPF can be
used to bypass this protection by crafting branch history in kernel mode.
To stop intra-mode attacks via cBPF programs, Intel created a new
instruction Indirect Branch History Fence (IBHF). IBHF prevents the
predicted targets of subsequent indirect branches from being influenced by
branch history prior to the IBHF. IBHF is only effective while BHI_DIS_S is
enabled.
Add the IBHF instruction to cBPF jitted code's exit path. Add the new fence
when the hardware mitigation is enabled (i.e., X86_FEATURE_CLEAR_BHB_HW is
set) or after the software sequence (X86_FEATURE_CLEAR_BHB_LOOP) is being
used in a virtual machine. Note that X86_FEATURE_CLEAR_BHB_HW and
X86_FEATURE_CLEAR_BHB_LOOP are mutually exclusive, so the JIT compiler will
only emit the new fence, not the SW sequence, when X86_FEATURE_CLEAR_BHB_HW
is set.
Hardware that enumerates BHI_NO basically has BHI_DIS_S protections always
enabled, regardless of the value of BHI_DIS_S. Since BHI_DIS_S doesn't
protect against intra-mode attacks, enumerate BHI bug on BHI_NO hardware as
well.
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
Classic BPF programs have been identified as potential vectors for
intra-mode Branch Target Injection (BTI) attacks. Classic BPF programs can
be run by unprivileged users. They allow unprivileged code to execute
inside the kernel. Attackers can use unprivileged cBPF to craft branch
history in kernel mode that can influence the target of indirect branches.
Introduce a branch history buffer (BHB) clearing sequence during the JIT
compilation of classic BPF programs. The clearing sequence is the same as
is used in previous mitigations to protect syscalls. Since eBPF programs
already have their own mitigations in place, only insert the call on
classic programs that aren't run by privileged users.
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
