summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-10-29virtio-pci: fix per-vq MSI-X request logicMichael S. Tsirkin
Commit f68d24082e22ccee3077d11aeb6dc5354f0ca7f1 in 2.6.32-rc1 broke requesting IRQs for per-VQ MSI-X vectors: - vector number was used instead of the vector itself - we try to request an IRQ for VQ which does not have a callback handler This is a regression that causes warnings in kernel log, potentially lower performance as we need to scan vq list, and might cause system failure if the interrupt requested is in fact needed by another system. This was not noticed earlier because in most cases we were falling back on shared interrupt for all vqs. The warnings often look like this: virtio-pci 0000:00:03.0: irq 26 for MSI/MSI-X virtio-pci 0000:00:03.0: irq 27 for MSI/MSI-X virtio-pci 0000:00:03.0: irq 28 for MSI/MSI-X IRQ handler type mismatch for IRQ 1 current handler: i8042 Pid: 2400, comm: modprobe Tainted: G W 2.6.32-rc3-11952-gf3ed8d8-dirty #1 Call Trace: [<ffffffff81072aed>] ? __setup_irq+0x299/0x304 [<ffffffff81072ff3>] ? request_threaded_irq+0x144/0x1c1 [<ffffffff813455af>] ? vring_interrupt+0x0/0x30 [<ffffffff81346598>] ? vp_try_to_find_vqs+0x583/0x5c7 [<ffffffffa0015188>] ? skb_recv_done+0x0/0x34 [virtio_net] [<ffffffff81346609>] ? vp_find_vqs+0x2d/0x83 [<ffffffff81345d00>] ? vp_get+0x3c/0x4e [<ffffffffa0016373>] ? virtnet_probe+0x2f1/0x428 [virtio_net] [<ffffffffa0015188>] ? skb_recv_done+0x0/0x34 [virtio_net] [<ffffffffa00150d8>] ? skb_xmit_done+0x0/0x39 [virtio_net] [<ffffffff8110ab92>] ? sysfs_do_create_link+0xcb/0x116 [<ffffffff81345cc2>] ? vp_get_status+0x14/0x16 [<ffffffff81345464>] ? virtio_dev_probe+0xa9/0xc8 [<ffffffff8122b11c>] ? driver_probe_device+0x8d/0x128 [<ffffffff8122b206>] ? __driver_attach+0x4f/0x6f [<ffffffff8122b1b7>] ? __driver_attach+0x0/0x6f [<ffffffff8122a9f9>] ? bus_for_each_dev+0x43/0x74 [<ffffffff8122a374>] ? bus_add_driver+0xea/0x22d [<ffffffff8122b4a3>] ? driver_register+0xa7/0x111 [<ffffffffa001a000>] ? init+0x0/0xc [virtio_net] [<ffffffff81009051>] ? do_one_initcall+0x50/0x148 [<ffffffff8106e117>] ? sys_init_module+0xc5/0x21a [<ffffffff8100af02>] ? system_call_fastpath+0x16/0x1b virtio-pci 0000:00:03.0: irq 26 for MSI/MSI-X virtio-pci 0000:00:03.0: irq 27 for MSI/MSI-X Reported-by: Marcelo Tosatti <mtosatti@redhat.com> Reported-by: Shirley Ma <xma@us.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-10-28futex: Fix spurious wakeup for requeue_pi reallyThomas Gleixner
The requeue_pi path doesn't use unqueue_me() (and the racy lock_ptr == NULL test) nor does it use the wake_list of futex_wake() which where the reason for commit 41890f2 (futex: Handle spurious wake up) See debugging discussing on LKML Message-ID: <4AD4080C.20703@us.ibm.com> The changes in this fix to the wait_requeue_pi path were considered to be a likely unecessary, but harmless safety net. But it turns out that due to the fact that for unknown $@#!*( reasons EWOULDBLOCK is defined as EAGAIN we built an endless loop in the code path which returns correctly EWOULDBLOCK. Spurious wakeups in wait_requeue_pi code path are unlikely so we do the easy solution and return EWOULDBLOCK^WEAGAIN to user space and let it deal with the spurious wakeup. Cc: Darren Hart <dvhltc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: John Stultz <johnstul@linux.vnet.ibm.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> LKML-Reference: <4AE23C74.1090502@us.ibm.com> Cc: stable@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-10-28ARM: S3C2410: Fix sparse warnings in arch/arm/mach-s3c2410/gpio.cBen Dooks
Fix sparse warning in arch/arm/mach-s3c2410/gpio.c due to missing include of <mach/gpio-fns.h>. Fixes the following warning: warning: symbol 's3c2410_gpio_irqfilter' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: S3C2440: mini2440: Fix spare warningsBen Dooks
Fix the following sparse warnings in arch/arm/mach-s3c2440/mach-mini2440.c due to missing 'static'. warning: symbol 'mini2440_lcd_cfg' was not declared. Should it be static? warning: symbol 'mini2440_fb_info' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: S3C24XX: Fix warnings in arch/arm/plat-s3c24xx/gpio.cBen Dooks
Fix the following warnings from sparse in arch/arm/plat-s3c24xx/gpio. due to the missing include of <mach/gpio-fns.h> gpio.c:36:6: warning: symbol 's3c2410_gpio_cfgpin' was not declared. Should it be static? gpio.c:84:14: warning: symbol 's3c2410_gpio_getcfg' was not declared. Should it be static? gpio.c:103:6: warning: symbol 's3c2410_gpio_pullup' was not declared. Should it be static? gpio.c:125:5: warning: symbol 's3c2410_gpio_getpull' was not declared. Should it be static? gpio.c:138:6: warning: symbol 's3c2410_gpio_setpin' was not declared. Should it be static? gpio.c:157:14: warning: symbol 's3c2410_gpio_getpin' was not declared. Should it be static? gpio.c:184:5: warning: symbol 's3c2410_gpio_getirq' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: S3C2440: mini2440: Fix missing CONFIG_S3C_DEV_USB_HOSTBen Dooks
Fix missing select of S3C_DEV_USB_HOST when building for mini2440 only. Fixes the following error: built-in.o: undefined reference to `s3c_device_usb` Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: Merge fixes-s3c64xx-dmaBen Dooks
Merge branch 'fixes-s3c64xx-dma' into fixes-s3c-2632-rc5
2009-10-28ARM: Merge fixes-s3c64xxBen Dooks
Merge branch 'fixes-s3c64xx' into fixes-s3c-2632-rc5
2009-10-28ARM: S3C24XX: arch/arm/plat-s3c24xx: Move dereference after NULL testJulia Lawall
If the NULL test on buf is needed, then the dereference should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: S3C: Fix adc function exportsRyan Mallon
Fix the export of s3c_adc_read. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> [ben-linux@fluff.org: remove unexport of s3c_adc_start, needed for ts] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: S3C2410: Fix link if CONFIG_S3C2410_IOTIMING is not setBen Dooks
Fix the link errors if cpu-frequency support is enabled on s3c2410 systems but there is no CONFIG_S3C2410_IOTIMING set. Fix this by ensuring the relevant symbols are defined NULL if the code is not being built in. Fixes the following error: arch/arm/mach-s3c2410/built-in.o: undefined reference to `s3c2410_iotiming_get' arch/arm/mach-s3c2410/built-in.o: undefined reference to `s3c2410_iotiming_set' arch/arm/mach-s3c2410/built-in.o: undefined reference to `s3c2410_iotiming_calc' Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: S3C24XX: Introduce S3C2442B CPUHarald Welte
Add the S3C2442B CPU ID to aid support the Openmoko GTA02 / Freerunner. Signed-off-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: Andy Green <andy@warmcat.com> Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net> [ben-linux@fluff.org: edit description for clarity and S3C2442B as uppercase] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: S3C24XX: Define a macro to avoid compilation errorRamax Lo
Define a macro to avoid the following error during kernel build process for platforms other than s3c2410: arch/arm/plat-s3c24xx/cpu.c:84: error: ‘s3c2410a_init’ undeclared here (not in a function) Signed-off-by: Ramax Lo <ramaxlo@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-10-28ARM: S3C: Add info for supporting circular DMA buffersBen Dooks
The S3C64XX DMA implementation will work a lot better with the ability to enqueue circular buffers as the hardware can do it's own linked-list management. Add a function s3c_dma_has_circular() to show that the system can do this and a flag for the channel. Update the s3c24xx/s3c64xx I2S DMA code to deal with this. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Mark Brown <broonie@@opensource.wolfsonmicro.com>
2009-10-28x86/amd-iommu: Un__init function required on shutdownJoerg Roedel
The function iommu_feature_disable is required on system shutdown to disable the IOMMU but it is marked as __init. This may result in a panic if the memory is reused. This patch fixes this bug. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-10-28ACPI: clean up video.c boundary checks and typesArjan van de Ven
proc.c and video.c are a bit sloppy around types and style, confusing gcc for a new feature that'll be in 2.6.33 and will cause a warning on the current code. This patch changes if (foo + 1 > sizeof bar) into if (foo >= sizeof(bar)) which is more kernel-style. it also changes a variable in proc.c to unsigned; it gets assigned a value from an unsigned type, and is then only compared for > not for negative, so using unsigned is just outright the right type Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-10-29sched: move rq_weight data array out of .percpuJiri Kosina
Commit 34d76c41 introduced percpu array update_shares_data, size of which being proportional to NR_CPUS. Unfortunately this blows up ia64 for large NR_CPUS configuration, as ia64 allows only 64k for .percpu section. Fix this by allocating this array dynamically and keep only pointer to it percpu. The per-cpu handling doesn't impose significant performance penalty on potentially contented path in tg_shares_up(). ... ffffffff8104337c: 65 48 8b 14 25 20 cd mov %gs:0xcd20,%rdx ffffffff81043383: 00 00 ffffffff81043385: 48 c7 c0 00 e1 00 00 mov $0xe100,%rax ffffffff8104338c: 48 c7 45 a0 00 00 00 movq $0x0,-0x60(%rbp) ffffffff81043393: 00 ffffffff81043394: 48 c7 45 a8 00 00 00 movq $0x0,-0x58(%rbp) ffffffff8104339b: 00 ffffffff8104339c: 48 01 d0 add %rdx,%rax ffffffff8104339f: 49 8d 94 24 08 01 00 lea 0x108(%r12),%rdx ffffffff810433a6: 00 ffffffff810433a7: b9 ff ff ff ff mov $0xffffffff,%ecx ffffffff810433ac: 48 89 45 b0 mov %rax,-0x50(%rbp) ffffffff810433b0: bb 00 04 00 00 mov $0x400,%ebx ffffffff810433b5: 48 89 55 c0 mov %rdx,-0x40(%rbp) ... After: ... ffffffff8104337c: 65 8b 04 25 28 cd 00 mov %gs:0xcd28,%eax ffffffff81043383: 00 ffffffff81043384: 48 98 cltq ffffffff81043386: 49 8d bc 24 08 01 00 lea 0x108(%r12),%rdi ffffffff8104338d: 00 ffffffff8104338e: 48 8b 15 d3 7f 76 00 mov 0x767fd3(%rip),%rdx # ffffffff817ab368 <update_shares_data> ffffffff81043395: 48 8b 34 c5 00 ee 6d mov -0x7e921200(,%rax,8),%rsi ffffffff8104339c: 81 ffffffff8104339d: 48 c7 45 a0 00 00 00 movq $0x0,-0x60(%rbp) ffffffff810433a4: 00 ffffffff810433a5: b9 ff ff ff ff mov $0xffffffff,%ecx ffffffff810433aa: 48 89 7d c0 mov %rdi,-0x40(%rbp) ffffffff810433ae: 48 c7 45 a8 00 00 00 movq $0x0,-0x58(%rbp) ffffffff810433b5: 00 ffffffff810433b6: bb 00 04 00 00 mov $0x400,%ebx ffffffff810433bb: 48 01 f2 add %rsi,%rdx ffffffff810433be: 48 89 55 b0 mov %rdx,-0x50(%rbp) ... Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-10-29percpu: allow pcpu_alloc() to be called with IRQs offJiri Kosina
pcpu_alloc() and pcpu_extend_area_map() perform a series of spin_lock_irq()/spin_unlock_irq() calls, which make them unsafe with respect to being called from contexts which have IRQs off. This patch converts the code to perform save/restore of flags instead, making pcpu_alloc() (or __alloc_percpu() respectively) to be called from early kernel startup stage, where IRQs are off. This is needed for proper initialization of per-cpu rq_weight data from sched_init(). tj: added comment explaining why irqsave/restore is used in alloc path. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-10-28virtio-net: fix data corruption with OOMMichael S. Tsirkin
virtio net used to unlink skbs from send queues on error, but ever since 48925e372f04f5e35fec6269127c62b2c71ab794 we do not do this. This causes guest data corruption and crashes with vhost since net core can requeue the skb or free it without it being taken off the list. This patch fixes this by queueing the skb after successful transmit. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28sfc: Set ip_summed correctly for page buffers passed to GROBen Hutchings
Page buffers containing packets with an incorrect checksum or using a protocol not handled by hardware checksum offload were previously not passed to LRO. The conversion to GRO changed this, but did not set the ip_summed value accordingly. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28cnic: Fix L2CTX_STATUSB_NUM offset in context memory.Michael Chan
The BNX2_L2CTX_STATUSB_NUM definition needs to be changed to match the recent firmware update: commit 078b0735881c7969aaf21469f3577831cddd9f8c bnx2: Update firmware to 5.0.0.j3. Without the fix, bnx2 can crash intermittently in bnx2_rx_int() when iSCSI is enabled. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28drm/radeon/kms: fix rc410 suspend/resume.Dave Airlie
This fixes suspend/resume on my rc410 motherboard, it restores the memory controller setup before posting the GPU, since it seems to need the MC_FB_LOCATION setup correctly. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28drm/radeon/kms: add quirk for hp dc5750Alex Deucher
Doesn't have a tv-out port Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28drm/radeon/kms/atom: fix potential oops in spread spectrum codeAlex Deucher
Make sure we have an LVDS encoder before casting enc_priv. [airlied: also fix two missing cpu_to_le16 casts we noticed on irc] Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28drm/kms: typo fixJames Simmons
I believe this is a typo. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28powerpc: perf_event: Cleanup output by adding symbolsAnton Blanchard
Add some dummy symbols for the branches at 0xf00, 0xf20 and 0xf40, otherwise hits end up in trap_0e which is confusing to the user. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28powerpc: perf_event: Hide iseries_check_pending_irqsAnton Blanchard
If CONFIG_PPC_ISERIES isn't defined we end up with iseries_check_pending_irqs and do_work at the same address. perf ends up picking iseries_check_pending_irqs which creates confusing backtraces. Hide it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28powerpc: perf_event: Cleanup copy_page output by hiding setup symbolAnton Blanchard
A lot of hits in "setup" doesn't make much sense, so hide this symbol and allow all the hits to end up in copy_4k_page. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28powerpc: Export powerpc_debugfs_rootAnton Blanchard
Kernel modules should be able to place their debug output inside our powerpc debugfs directory. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28powerpc: Disable HCALL_STATS by defaultAnton Blanchard
The overhead of HCALL_STATS is quite high and the functionality is very rarely used. Key statistics are also missing (eg min/max). With the new hcall tracepoints much more powerful tracing can be done in a kernel module. Lets disable this by default. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28powerpc: tracing: Give hypervisor call tracepoints access to argumentsAnton Blanchard
While most users of the hcall tracepoints will only want the opcode and return code, some will want all the arguments. To avoid the complexity of using varargs we pass a pointer to the register save area, which contains all the arguments. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28powerpc: tracing: Add hypervisor call tracepointsAnton Blanchard
Add hcall_entry and hcall_exit tracepoints. This replaces the inline assembly HCALL_STATS code and converts it to use the new tracepoints. To keep the disabled case as quick as possible, we embed a status word in the TOC so we can get at it with a single load. By doing so we keep the overhead at a minimum. Time taken for a null hcall: No tracepoint code: 135.79 cycles Disabled tracepoints: 137.95 cycles For reference, before this patch enabling HCALL_STATS resulted in a null hcall of 201.44 cycles! Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28powerpc: tracing: Add powerpc tracepoints for timer entry and exitAnton Blanchard
We can monitor the effectiveness of our power management of both the kernel and hypervisor by probing the timer interrupt. For example, on this box we see 10.37s timer interrupts on an idle core: <idle>-0 [010] 3900.671297: timer_interrupt_entry: pt_regs=c0000000ce1e7b10 <idle>-0 [010] 3900.671302: timer_interrupt_exit: pt_regs=c0000000ce1e7b10 <idle>-0 [010] 3911.042963: timer_interrupt_entry: pt_regs=c0000000ce1e7b10 <idle>-0 [010] 3911.042968: timer_interrupt_exit: pt_regs=c0000000ce1e7b10 <idle>-0 [010] 3921.414630: timer_interrupt_entry: pt_regs=c0000000ce1e7b10 <idle>-0 [010] 3921.414635: timer_interrupt_exit: pt_regs=c0000000ce1e7b10 Since we have a 207MHz decrementer it will go negative and fire every 10.37s even if Linux is completely idle. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28powerpc: tracing: Add powerpc tracepoints for interrupt entry and exitAnton Blanchard
This adds powerpc-specific tracepoints for interrupt entry and exit. While we already have generic irq_handler_entry and irq_handler_exit tracepoints there are cases on our virtualised powerpc machines where an interrupt is presented to the OS, but subsequently handled by the hypervisor. This means no OS interrupt handler is invoked. Here is an example on a POWER6 machine with the patch below applied: <idle>-0 [006] 3243.949840744: irq_entry: pt_regs=c0000000ce31fb10 <idle>-0 [006] 3243.949850520: irq_exit: pt_regs=c0000000ce31fb10 <idle>-0 [007] 3243.950218208: irq_entry: pt_regs=c0000000ce323b10 <idle>-0 [007] 3243.950224080: irq_exit: pt_regs=c0000000ce323b10 <idle>-0 [000] 3244.021879320: irq_entry: pt_regs=c000000000a63aa0 <idle>-0 [000] 3244.021883616: irq_handler_entry: irq=87 handler=eth0 <idle>-0 [000] 3244.021887328: irq_handler_exit: irq=87 return=handled <idle>-0 [000] 3244.021897408: irq_exit: pt_regs=c000000000a63aa0 Here we see two phantom interrupts (no handler was invoked), followed by a real interrupt for eth0. Without the tracepoints in this patch we would have missed the phantom interrupts. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28powerpc: perf_event: Add alignment-faults and emulation-faults software eventsAnton Blanchard
Hook up the alignment-faults and emulation-faults events for powerpc. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28powerpc: Create PPC_WARN_ALIGNMENT to match PPC_WARN_EMULATEDAnton Blanchard
perf_event wants a separate event for alignment and emulation faults, so create another emulation event. This will make it easy to hook in perf_event at one spot. We pass in regs which will be required for these events. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28perf_event: Add alignment-faults and emulation-faults software eventsAnton Blanchard
Add two more software events that are common to many cpus. Alignment faults: When a load or store is not aligned properly. Emulation faults: When an instruction is emulated in software. Both cause a very significant slowdown (100x or worse), so identifying and fixing them is very important. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28powerpc: perf_event: Enable SDAR in continous sample modeAnton Blanchard
In continuous sampling mode we want the SDAR to update. While we can select between dcache misses and ERAT (L1-TLB) misses, a decent default is to enable both. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28powerpc: perf_event: Log invalid data addresses as all 1sAnton Blanchard
When we take an exception and the SDAR isn't synchronised we currently log 0 as the address. Unfortunately this is a pretty common value, so use ~0UL instead. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28drm/radeon/kms/atom: Make card_info per deviceMathias Fröhlich
Make the struct card_info, which is a per struct radeon_device dataset, a struct member of the radeon device instead of a static per kernel module value. This should avoid potential problems with two radeon cards installed in one system. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28drm/radeon/kms/atom: Fix DVO supportAlex Deucher
DVO in 12 bit mode (which seems to be the most common config) requires 2x ppll. Fixes fdo bug 21857. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28drm/radeon/kms/atom: loosen pll min output limitsAlex Deucher
Limiting the pll output range is a good thing generally as it limits the number of possible pll combinations for a given frequency presumably to the ones that work best on each card. That's why the limits are in the bios tables. However, certain duallink DVI monitors seem to like pll combinations that would be limited by this at least on pre-DCE 3.0 r6xx hardware. This might need to be adjusted per family or per clock range in the future. See fdo bug 24727. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28drm/kms: fix kms/fbdev colormap support properly.Dave Airlie
This sets the fbcon to use TRUECOLOR by default, it then only modifies the pseudo palette for fbcon, and only touches the real palette when in 8-bit pseudo color mode. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28drm: Add the basic check for the detailed timing in EDIDZhao Yakui
Sometimes we will get the incorrect display modeline when parsing the detailed timing in EDID. For example: >hsync/vsync width is zero >sync is beyond the blank. So add the basic check for the detailed timing in EDID to avoid the incorrect display modeline. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28drm/radeon/kms: ignore vga arbiter return.Dave Airlie
Since we register all radeon devices, and the arbiter only cares about VGA class ones, we will fail to startup on display controller class devices. We don't gain anything by using the return value here. this helps kms on sparc64 get started. Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-27xen: set up mmu_ops before trying to set any ptesJeremy Fitzhardinge
xen_setup_stackprotector() ends up trying to set page protections, so we need to have vm_mmu_ops set up before trying to do so. Failing to do so causes an early boot crash. [ Impact: Fix early crash under Xen. ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-10-28Merge commit 'gcl/merge' into mergeBenjamin Herrenschmidt
2009-10-27MAINTAINERS: rt2x00 list is moderatedBartlomiej Zolnierkiewicz
Cc: users@rt2x00.serialmonkey.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27airo: Reorder tests, check bounds before elementRoel Kluin
Test whether index is within bounds before reading the element Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27mac80211: fix for incorrect sequence number on hostapd injected framesBjörn Smedman
When hostapd injects a frame, e.g. an authentication or association response, mac80211 looks for a suitable access point virtual interface to associate the frame with based on its source address. This makes it possible e.g. to correctly assign sequence numbers to the frames. A small typo in the ethernet address comparison statement caused a failure to find a suitable ap interface. Sequence numbers on such frames where therefore left unassigned causing some clients (especially windows-based 11b/g clients) to reject them and fail to authenticate or associate with the access point. This patch fixes the typo in the address comparison statement. Signed-off-by: Björn Smedman <bjorn.smedman@venatech.se> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-10-01 22:14:54 +0000