summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-01-17drm/amdgpu: Add gfx ras function on gfx v11_0_3YiPeng Chai
Add gfx ras function on gfx v11_0_3. V2: 1. Add separate source files for gfx v11_0_3. 2. Create a common function to initialize gfx ras block. V3: 1. Rename amdgpu_gfx_ras_block_init to amdgpu_gfx_ras_sw_init. 2. Adjust the calling position of amdgpu_gfx_ras_sw_init. 3. Remove gfx_v11_0_3_ras_ops. V4: Revert changes in amdgpu_ras_interrupt_poison_consumption_handler. V5: 1. Remove invalid include file in gfx_v11_0_3.c. 2. Reduce the number of parameters of amdgpu_gfx_ras_sw_init. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd: Fix renoir/green sardine MP0 IP version detectionMario Limonciello
The existing codebase never had a case for detecting MP0 version on Renoir and instead relied upon hardcoded chip name. This was missed as part of the changes to migrate all IP blocks to build filenames from `amdgpu_ucode.c`. Consequently, Renoir tries to fetch a binary with 11_0_3 in the filename and since it's supposed to have "renoir" in the filename fails to probe. The fbdev still works though so the series worked. Add a case for Renoir into the legacy table to ensure the right ASD and TA firmware load again. Reported-by: Ekene Akuneme <Ekene.Akuneme@amd.com> Reported-by: Nicholas Choi <Nicholas.Choi@amd.com> Cc: Alex Hung <Alex.Hung@amd.com> Fixes: 994a97447e38 ("drm/amd: Parse both v1 and v2 TA microcode headers using same function") Fixes: 54a3e032340e ("drm/amd: Add a legacy mapping to "amdgpu_ucode_ip_version_decode"") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: 3.2.218Aric Cyr
This version brings along following fixes: - Revert patches that caused regressions associated with audio and an old change that checks the DCN version. - Refactor DDC and HDP. - Move DPIA and DPCD logic to new files. - Updates to DMUB. - Optimization and bug fixes for SUBVP/DRR. - Drop legacy code. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: hdcp not enabled on connector 0hersen wu
[Why] incorrect skip when drm_connector.index = 0 within event_property_validate and update [How] handle hdcp validate and update for connector 0 Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: hersen wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: phase2 enable mst hdcp multiple displayshersen wu
[why] For MST topology with 1 physical link and multiple connectors (>=2), e.g. daisy cahined MST + SST, or 1-to-multi MST hub, if userspace set to enable the HDCP simultaneously on all connected outputs, the commit tail iteratively call the hdcp_update_display() for each display (connector). However, the hdcp workqueue data structure for each link has only one DM connector and encryption status members, which means the work queue of property_validate/update() would only be triggered for the last connector within this physical link, and therefore the HDCP property value of other connectors would stay on DESIRED instead of switching to ENABLED, which is NOT as expected. [how] Use array of AMDGPU_DM_MAX_DISPLAY_INDEX for both aconnector and encryption status in hdcp workqueue data structure for each physical link. For property validate/update work queue, we iterates over the array and do similar operation/check for each connected display. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Signed-off-by: hersen wu <hersenxs.wu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Account for MPO planes in dcn32 mall alloc calculationsDillon Varone
[WHY?] Cannot only consider the MALL required from top pipes because of the MPO case. [HOW?] Only count a pipe if it fits the following criteria: 1) does not have a top pipe (is the topmost pipe for that plane) 2) it does have a top pipe, but that pipe is associated with a different plane Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Allow subvp on vactive pipes that are 2560x1440@60Alvin Lee
Enable subvp on specifically 1440p@60hz displays even though it can switch in vactive. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Request min clocks after disabling pipes on initAlvin Lee
[Description] - Request min clocks after disabling pipes on init - This optimizes for power savings during init sequence - Also handles the case where we boot up with no display connected Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: fix mapping to non-allocated addressBrandon Syu
[Why] There is an issue mapping non-allocated location of memory. It would allocate gpio registers from an array out of bounds. [How] Patch correct numbers of bounds for using. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Brandon Syu <Brandon.Syu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Skip backlight control delay on external powered linksTony Tascioglu
[Why] When an eDP panel is powered externally from a different GPU, we can avoid waiting for hardware sequencing delays when switching the backlight on/off as the display backlight is no longer powered by the original source. [How] This commit extends the 'link_powered_externally' variable to allow bypassing hardware delays for additional backlight commands and force the backlight on/off when a link is powered by another GPU. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Felipe Clark <felipe.clark@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tony Tascioglu <tony.tascioglu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: contional remove disable dig_fifo when blankCharlene Liu
keep dig_fifo enable for test pattern generation. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Remove DISPCLK dentist programming for dcn32Dillon Varone
[WHY?] For dcn32, SMU handles DISPCLK dentist programming. [HOW?] Only use calls to SMU to set DISPCLK. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Add extra mblk for DCCSaaem Rizvi
[Why] DCC meta was found to be detached from usable pixel data. Due to this DCC meta and the end of the fetched part of the frame will be on not be on the same mblk. Furthermore if the meta is not aligned to the mblk size, then we require an extra mblk in MALL to account for this. [How] Always add an additional mblk when DCC is enabled for detachment and misalignment. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: set active bit for desktop with VSDBv3Dillon Varone
When using freesync on desktop, need to set freesync active bit for AMD VSDBv3 infopacket. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Remove unused codeRodrigo Siqueira
Remove some code that is never used from freesync file. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Optimize link power-down when link powered externallyTony Tascioglu
[Why] When an eDP panel is powered externally by a different GPU, we don't need to wait for hardware sequencing delays when powering down a link, as the display is not dependent on the GPU being powered down. [How] This commit adds a variable 'link_powered_externally' to indicate when a link is being powered by another GPU. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Felipe Clark <felipe.clark@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tony Tascioglu <tony.tascioglu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: fix an error check condition for synced pipesAurabindo Pillai
Checking for disabled master pipe on a timing synchronized pipe is incorrect in the case of ODM combine. This case is acceptable as long as the disabled master pipe is part of the ODM tree. Skip printing error message if this condition holds true. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17Revert "drm/amd/display: Demote Error Level When ODM Transition Supported"Aurabindo Pillai
This reverts commit e81b6a4427f3ca37859f5b9fdb6a66683bb84e2e. Reverting to put in a better solution which does not involve checking DCN version. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: move dp capability related logic to link_dp_capabilityWenjing Liu
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: move dp phy related logic to link_dp_phyWenjing Liu
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: move dp link training logic to link_dp_trainingWenjing Liu
[why] Extract dp link training logic out to their own files. link_dp_training - high level training sequence and helper functions. link_dp_training_8b_10b - dp1.x training link_dp_training_auxless - aux-less training link_dp_traininig_dpia - dpia training link_dp_training_fixed_vs_pe_retimer - fixed vs pe retimer training link_dp_training_128b_132b - dp2.1 training Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Remove SubVp support if src/dst rect does not equal stream ↵Saaem Rizvi
timing Current implementation of SubVP does not support cases where stream timing matched neither the destination rect nor the source rect. Will need to further debug to see how we can support these cases. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Change i2c speed for hdcpBhawanpreet Lakha
[why] HDCP 1.4 failed on SL8800 SW w/a test driver use. [how] slower down the HW i2c speed when used by HW i2c. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: cleanup function args in dmlDillon Varone
Remove array size on array passed to CalculateDETSwathFillLatencyHiding. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Use DML for MALL SS and Subvp allocation calculationsDillon Varone
MALL SS and Subvp use the same calculations for determining the size of the required allocation for a given surface, which is already done in DML. Add an interface to extract this information from VBA variables and use in their respective helper functions. Also refactor existing code to remove stale workarounds. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Account for Subvp Phantoms in DML MALL surface calculationsDillon Varone
DML does not explicitly consider support for space in MALL required for subvp phantom pipes. This adds a check to make sure portion of phantom surface can fit in MALL. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Account for DCC Meta pitch in DML MALL surface calculationsDillon Varone
DML incorrectly uses surface width for determining DCC meta size in MALL allocation calculations. Meta pitch should be used instead. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amd/display: Optimize subvp and drr validationDillon Varone
Two issues existed: 1) Configs that support DRR, but have it disabled will fail subvp+vblank validation incorrectly. Use subvp+vblank path for this case. 2) Configs that support DRR and have it enabled can use higher voltage level than required if they also support subvp+vblank. Use lowest supported voltage level for this case. Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amdgpu: Add a missing tabDan Carpenter
This tab was deleted accidentally and triggers a Smatch warning: drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:1006 gfx_v8_0_init_microcode() warn: inconsistent indenting Add it back. Fixes: 0aaafb7359d2 ("drm/amd: Use `amdgpu_ucode_*` helpers for GFX8") Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm: panel: visionox: add backlight dependencyArnd Bergmann
The newly added driver uses the backlight subsystem but is missing the corresponding Kconfig dependency: arm-linux-gnueabi-ld: drivers/gpu/drm/panel/panel-visionox-vtdr6130.o: in function `visionox_vtdr6130_probe': panel-visionox-vtdr6130.c:(.text+0xdee): undefined reference to `devm_backlight_device_register' Fixes: 65dc9360f741 ("drm: panel: Add Himax HX8394 panel controller driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230117165522.2104380-1-arnd@kernel.org
2023-01-17drm/bridge: cdns-dsi: Add support for J721E wrapperRahul T R
Add support for wrapper settings for DSI bridge on j721e. Also enable DPI0 --------------- ----------------------- | -------| |------- | | DSS | DPI2 |----->| DPI0 | DSI Wrapper | | -------| |------- | --------------- ----------------------- As shown above DPI2 output of DSS is connected to DPI0 input of DSI Wrapper, DSI wrapper gives control wheather to enable/disable DPI0 input. In j721e above is the only configuration supported Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-6-r-ravikumar@ti.com
2023-01-17drm/bridge: cdns-dsi: Create a header fileRahul T R
Create a header file for cdns dsi and move structure definations to prepare for adding j721e wrapper support Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-5-r-ravikumar@ti.com
2023-01-17drm/bridge: cdns-dsi: Move to drm/bridge/cadenceRahul T R
Move the cadence dsi bridge under drm/bridge/cadence directory, to prepare for adding j721e wrapper support Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-4-r-ravikumar@ti.com
2023-01-17dt-bindings: display: bridge: cdns,dsi: Add compatible for dsi on j721eRahul T R
Add compatible to support dsi bridge on j721e Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-3-r-ravikumar@ti.com
2023-01-17dt-bindings: display: bridge: Convert cdns,dsi.txt to yamlRahul T R
Convert cdns,dsi.txt binding to yaml format Signed-off-by: Rahul T R <r-ravikumar@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-2-r-ravikumar@ti.com
2023-01-17drm/omap: Fix kernel docsTomi Valkeinen
Fix doc related warnings seen with W=1: the function names have changed but the docs have not been changed accordingly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220916082206.167427-2-tomi.valkeinen@ideasonboard.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-17drm/ttm: fix some minor kerneldoc issuesChristian König
Pointed out by the kernel test robot while merging ttm_bo_api.h and ttm_bo_driver.h. Signed-off-by: Christian König <christian.koenig@amd.com> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230117123345.387078-1-christian.koenig@amd.com
2023-01-17drm/ttm: Include <linux/vmalloc.h> to fix MIPS buildThomas Zimmermann
On MIPS, vmap() and vunmap() are undeclared in ttm_bo_util.c. An error message is shown below. CC drivers/gpu/drm/ttm/ttm_bo_util.o ../drivers/gpu/drm/ttm/ttm_bo_util.c: In function 'ttm_bo_kmap_ttm': ../drivers/gpu/drm/ttm/ttm_bo_util.c:364:32: error: implicit declaration of function 'vmap'; did you mean 'kmap'? [-Werror=implicit-function-declaration] 364 | map->virtual = vmap(ttm->pages + start_page, num_pages, | ^~~~ | kmap ../drivers/gpu/drm/ttm/ttm_bo_util.c:364:30: warning: assignment to 'void *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 364 | map->virtual = vmap(ttm->pages + start_page, num_pages, | ^ ../drivers/gpu/drm/ttm/ttm_bo_util.c: In function 'ttm_bo_kunmap': ../drivers/gpu/drm/ttm/ttm_bo_util.c:429:17: error: implicit declaration of function 'vunmap'; did you mean 'kunmap'? [-Werror=implicit-function-declaration] 429 | vunmap(map->virtual); | ^~~~~~ | kunmap ../drivers/gpu/drm/ttm/ttm_bo_util.c: In function 'ttm_bo_vmap': ../drivers/gpu/drm/ttm/ttm_bo_util.c:509:23: warning: assignment to 'void *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 509 | vaddr = vmap(ttm->pages, ttm->num_pages, 0, prot); | ^ Fix this by including <linux/vmalloc.h>. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230116121023.14245-1-tzimmermann@suse.de
2023-01-17Merge tag 'drm-intel-next-2023-01-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 feature pull #1 for v6.3: Features and functionality: - Meteorlake display enabling (Animesh, Luca, Stan, Jouni, Anusha) - DP MST DSC support (Stan) - Gamma/degamma readout support for the state checker (Ville) - Enable SDP split support for DP 2.0 (Vinod) - Add probe blocking support to i915.force_probe parameter (Rodrigo) - Enable Xe HP 4tile support (Jonathan) Refactoring and cleanups: - Color refactoring, especially related to DSB usage (Ville) - DSB refactoring (Ville) - DVO refactoring (Ville) - Backlight register and logging cleanups (Jani) - Avoid display direct calls to uncore (Maarten, Jani) - Add new "soc" sub-directory (Jani) - Refactor DSC platform support checks (Swati) Fixes: - Interlace modes are no longer supported starting at display version 12 (Ankit) - Use polling read for aux control (Arun) - DMC firmware no longer requires specific versions (Gustavo) - Fix PSR flickering and freeze issues (Jouni) - Fix ICL+ DSI GPIO handling (Jani) - Ratelimit errors in display engine irqs (Lucas) - Fix DP MST DSC bpp and timeslot calculations (Stan) - Fix CDCLK squash and crawl sequences (Ville, Anusha) - Fix bigjoiner checks for fused pipes (Ville) - Fix ADP+ degamma LUT size (Ville) - Fix DVO ch7xxx and sil164 suspend/resume (Ville) - Fix memory leak in VBT parsing (Xia Fukun) - Fix VBT packet port selection for dual link DSI (Mikko Kovanen) - Fix SDP infoframe product string for discrete graphics (Clint) - Fix VLV/CHV HDMI/DP audio enable (Ville) - Fix VRR delays and calculations (Ville) - No longer disable transcoder for PHY test pattern change (Khaled) - Fix dual PPS handling (Ville) - Fix timeout and wait for DDI BUF CTL active after enabling (Ankit) Merges: - Backmerge drm-next to sync up with v6.2-rc1 (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87tu0wez34.fsf@intel.com
2023-01-16drm/nouveau/fb/ga102: Replace zero-length array of trailing structs with ↵Kees Cook
flex-array Zero-length arrays are deprecated[1] and are being replaced with flexible array members in support of the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy(), correctly instrument array indexing with UBSAN_BOUNDS, and to globally enable -fstrict-flex-arrays=3. Replace zero-length array with flexible-array member. This results in no differences in binary output. [1] https://github.com/KSPP/linux/issues/78 Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Gourav Samaiya <gsamaiya@nvidia.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230103234835.never.378-kees@kernel.org
2023-01-16drm/bridge: tc358767: Set default CLRSIPO countMarek Vasut
The current CLRSIPO count is still marginal and does not work with high DSI clock rates in burst mode. Increase it further to allow the DSI link to work at up to 1Gbps lane speed. This returns the counts to defaults as provided by datasheet. Fixes: ea6490b02240b ("drm/bridge: tc358767: increase CLRSIPO count") Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221016003556.406441-1-marex@denx.de
2023-01-16Merge tag 'drm-misc-next-2023-01-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.3: UAPI Changes: * fourcc: Document Open Source user waiver Cross-subsystem Changes: * firmware: fix color-format selection for system framebuffers Core Changes: * format-helper: Add conversion from XRGB8888 to various sysfb formats; Make XRGB8888 the only driver-emulated legacy format * fb-helper: Avoid blank consoles from selecting an incorrect color format * probe-helper: Enable/disable HPD on connectors plus driver updates * Use drm_dbg_ helpers in several places * docs: Document defaults for CRTC backgrounds; Document use of drm_minor Driver Changes: * arm/hdlcd: Use new debugfs helpers * gud: Use new debugfs helpers * panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert many drivers to common generic DSI write-sequence helper * v3d: Do not opencode drm_gem_object_lookup() * vc4: Various HVS an CRTC fixes * vkms: Fix SEGFAULT from incorrect GEM-buffer mapping * Convert various drivers to i2c probe_new() Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g
2023-01-16Merge tag 'amd-drm-next-6.3-2023-01-13' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.3-2023-01-13: amdgpu: - Fix possible segfault in failure case - Rework FW requests to happen in early_init for all IPs so that we don't lose the sbios console if FW is missing - PSR fixes - Misc cleanups - Unload fix - SMU13 fixes amdkfd: - Fix for cleared VRAM BOs - Fix cleanup if GPUVM creation fails - Memory accounting fix - Use resource_size rather than open codeing it - GC11 mGPU fix radeon: - Fix memory leak on shutdown Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230113225911.7776-1-alexander.deucher@amd.com
2023-01-16Merge tag 'amd-drm-next-6.3-2023-01-06' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.3-2023-01-06: amdgpu: - secure display support for multiple displays - DML optimizations - DCN 3.2 updates - PSR updates - DP 2.1 updates - SR-IOV RAS updates - VCN RAS support - SMU 13.x updates - Switch 1 element arrays to flexible arrays - Add RAS support for DF 4.3 - Stack size improvements - S0ix rework - Soft reset fix - Allow 0 as a vram limit on APUs - Display fixes - Misc code cleanups - Documentation fixes - Handle profiling modes for SMU13.x amdkfd: - Error handling fixes - PASID fixes radeon: - Switch 1 element arrays to flexible arrays drm: - Add DP adaptive sync DPCD definitions UAPI: - Add new INFO queries for peak and min sclk/mclk for profile modes on newer chips Proposed mesa patch: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/278 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230106222037.7870-1-alexander.deucher@amd.com
2023-01-13drm/amd/display: add hubbub_init relatedCharlene Liu
Required by display init, also update get_dig_mode Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd/display: Update dmub header to match DMUBMustapha Ghaddar
[WHY] Last PR missed name of a struct to match in DMUB [HOW] Update the logic in dmub_cmh.h header Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amdgpu: Skip specific mmhub and sdma registers accessing under sriovYifan Zha
[Why] SDMA0_CNTL and MMHUB system aperture related registers are blocked by L1 Policy. Therefore, they cannot be accessed by VF and loged in violation. [How] For MMHUB registers, they will be programmed by PF. So VF will skip to program them in mmhubv3_0. For SDMA0_CNTL which is a PF_only register, VF don't need to program it in sdma_v6_0. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd/pm: Support RAS fatal error mode1 reset on smu v13_0_0 and v13_0_10Candice Li
Support RAS fatal error mode1 reset on smu v13_0_0 and v13_0_10. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amdgpu: Correct the power calcultion for Renior/Cezanne.jie1zhan
From smu firmware,the value of power is transferred in units of watts. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2321 Fixes: 137aac26a2ed ("drm/amdgpu/smu12: fix power reporting on renoir") Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd: fix some dead code in `gfx_v9_0_init_cp_compute_microcode`Mario Limonciello
Some dead code was introduced as part of utilizing the `amdgpu_ucode_*` helpers. Adjust the control flow to make sure that firmware is released in the appropriate error flows. Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1530548 ("Control flow issues") Fixes: ec787deb2ddf ("drm/amd: Use `amdgpu_ucode_*` helpers for GFX9") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-11 19:12:15 +0000