summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-09Revert "net: sctp: convert sctp_checksum_disable module param into sctp sysctl"David S. Miller
This reverts commit cda5f98e36576596b9230483ec52bff3cc97eb21. As per Vlad's request. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09ath9k: Run the LNA combining algorithm properlySujith Manoharan
The LNA combining algorithm has to be run for cards that support the required diversity features, make sure that that correct conditions are met before enabing this algorithm. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: Fix BTCOEX usage for RX diversitySujith Manoharan
BTCOEX has to be *disabled* for WLAN RX diversity to work on combo cards. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: use software queueing for multicast trafficFelix Fietkau
Create a per-vif dummy node entry for keeping the multicast software queues. This helps in setups with a lot of mulitcast traffic that could otherwise potentially drown out unicast traffic to stations. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: improve tx scheduling fairnessFelix Fietkau
Instead of trying to schedule the same TID multiple times in a loop, iterate over other TIDs/stations first. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: use software queues for un-aggregated data packetsFelix Fietkau
This is a first step for improving fairness between legacy and 802.11n traffic, and it should also improve reliability of resets and channel changes by keeping the hardware queue depth very short. When an aggregation session is torn down, all packets in the retry queue will be removed from the BAW and freed. For all subframes that have not been transmitted yet, the A-MPDU flag will be cleared, and a sequence number allocated. This ensures that the next A-MPDU session will get the correct initial sequence number. This happens both on aggregation session start and stop. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: always clear ps filter bit on new assocFelix Fietkau
Otherwise in some cases, EAPOL frames might be filtered during the initial handshake, causing delays and assoc failures. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: fix clearing expired A-MPDU subframes in tx completionFelix Fietkau
When the tid aggregation state has been marked as inactive, free completed tx packets immediately. When a new aggregation session has not been initialized yet, the BAW checks do not recognize it as expired. Might fix potential stalls in setting up a new aggregation session. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: prepare queueing code for handling unaggregated trafficFelix Fietkau
- Allow ath_tx_get_tid_subframe to return non-AMPDU subframes. - Reset the tid paused state on aggregation stop - Initialize software queues even when HT is not supported Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: fix block ack window tracking checkFelix Fietkau
When a packet has been tracked as part of the BlockAck window and added to the hardware queue, it can end up back in the TID queue again with fi->retries still set to 0 (e.g. if the frame was filtered). Keep an extra bit for the BAW tracking status to fix this corner case. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: simplify ath_tx_form_aggrFelix Fietkau
The check for ATH_AMPDU_SUBFRAME_DEFAULT is unnecessary, since it's set to half the maximum BlockAck Window size, which is already the maximum value that h_baw could possibly have. Also remove unnecessary variables. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: add CAB queue info to debugfsFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: add function for getting the tx tid for a packetFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: split tid retry packets into a separate queueFelix Fietkau
Improves packet retry order and helps with further tx queueing improvements. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: add utility functions for accessing tid queuesFelix Fietkau
Useful for further fixes / cleanups Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09brcmfmac: use CFG80211_TESTMODE_CMDJohannes Berg
This is essentially the same, but written shorter. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09net: wireless: rt2x00: Staticize rt2x00queue_pause_queue_nocheck()Jingoo Han
rt2x00queue_pause_queue_nocheck()is used only in this file. Fix the following sparse warning: drivers/net/wireless/rt2x00/rt2x00queue.c:939:6: warning: symbol 'rt2x00queue_pause_queue_nocheck' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09ath9k: Fix build failureSujith Manoharan
Make sure that CONFIG_ATH9K_BTCOEX_SUPPORT is used for the WLAN/BT RX diversity hooks. Reported by the kernel build testing backend. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09mwifiex: add packet coalesce supportAmitkumar Karwar
Coalesce filters are configured in firmware based on settings received from cfg80211. Packet type which is required by firmware is determined based on provided patterns in a rule: Unicast: if pattern '01' with offset 0 is found Multicast: if pattern '33:33' or '01:00:5e' with offset 0 is found Broadcast: if pattern 'ff:ff:ff:ff' with offset 0 is found Some example coalesce configuration files: 1) Coalesce Rx data packets from 192.168.0.88 mac address of our device is 00:50:43:21:53:7A Source IP address offset comes out as 52 after following calculations: 32 bytes of HW 802.11 header + 8 bytes LLC + 12 bytes in IPV4 header till source IP address Destination mac is at offset 6 in HW header. delay=100 condition=1 patterns=01,6+00:50:43:22,10+53:7A,52+c0:a8:00:58 2) Coalesce all broadcast and multicast packets(Multiple packet types are not allowed in a single rule. Hence created separate rules) delay=400 condition=1 patterns=33:33 delay=400 condition=1 patterns=ff:ff:ff:ff Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09mwifiex: increase max supported pattern offsetAmitkumar Karwar
The offset number is increased to accomodate requests from user to match more fields in a Rx packet. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09mwifiex: modify mwifiex_is_pattern_supported() routineAmitkumar Karwar
It is modified so that it can be reused for coalesce feature. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09mwifiex: rename mef macrosAmitkumar Karwar
Their names were generic. We need to define similar macros for coalesce feature. Hence they are renamed here. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-08-09Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-08-09Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2013-08-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fix from Jiri Kosina: "Revert of a patch which breaks enumeration workaround in hid-logitech-dj" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: Revert "HID: hid-logitech-dj: querying_devices was never set"
2013-08-09Merge tag 'fbdev-fixes-3.11-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev fixes from Tomi Valkeinen: - omapdss: compilation fix and DVI fix for PandaBoard - mxsfb: fix colors when using 18bit LCD bus * tag 'fbdev-fixes-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: ARM: OMAP: dss-common: fix Panda's DVI DDC channel video: mxsfb: fix color settings for 18bit data bus and 32bpp OMAPDSS: analog-tv-connector: compile fix
2013-08-09Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Mostly radeon, more fixes for dynamic power management which is is off by default for this release anyways, but there are a large number of testers, so I'd like to keep merging the fixes. Otherwise, radeon UVD fixes affecting suspend/resume regressions, i915 regression fixes, one for your mac mini, ast, mgag200, cirrus ttm fix and one regression fix in the core" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (25 commits) drm: Don't pass negative delta to ktime_sub_ns() drm/radeon: make missing smc ucode non-fatal drm/radeon/dpm: require rlc for dpm drm/radeon/cik: use a mutex to properly lock srbm instanced registers drm/radeon: remove unnecessary unpin drm/radeon: add more UVD CS checking drm/radeon: stop sending invalid UVD destroy msg drm/radeon: only save UVD bo when we have open handles drm/radeon: always program the MC on startup drm/radeon: fix audio dto calculation on DCE3+ (v3) drm/radeon/dpm: disable sclk ss on rv6xx drm/radeon: fix halting UVD drm/radeon/dpm: adjust power state properly for UVD on SI drm/radeon/dpm: fix spread spectrum setup (v2) drm/radeon/dpm: adjust thermal protection requirements drm/radeon: select audio dto based on encoder id for DCE3 drm/radeon: properly handle pm on gpu reset drm/i915: do not disable backlight on vgaswitcheroo switch off drm/i915: Don't call encoder's get_config unless encoder is active drm/i915: avoid brightness overflow when doing scale ...
2013-08-09vxlan: fix a soft lockup in vxlan module removalCong Wang
This is a regression introduced by: commit fe5c3561e6f0ac7c9546209f01351113c1b77ec8 Author: stephen hemminger <stephen@networkplumber.org> Date: Sat Jul 13 10:18:18 2013 -0700 vxlan: add necessary locking on device removal The problem is that vxlan_dellink(), which is called with RTNL lock held, tries to flush the workqueue synchronously, but apparently igmp_join and igmp_leave work need to hold RTNL lock too, therefore we have a soft lockup! As suggested by Stephen, probably the flush_workqueue can just be removed and let the normal refcounting work. The workqueue has a reference to device and socket, therefore the cleanups should work correctly. Suggested-by: Stephen Hemminger <stephen@networkplumber.org> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Tested-by: Cong Wang <amwang@redhat.com> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09vxlan: fix a regression of igmp joinCong Wang
This is a regression introduced by: commit 3fc2de2faba387218bdf9dbc6b13f513ac3b060a Author: stephen hemminger <stephen@networkplumber.org> Date: Thu Jul 18 08:40:15 2013 -0700 vxlan: fix igmp races Before this commit, the old code was: if (vxlan_group_used(vn, vxlan->default_dst.remote_ip)) ip_mc_join_group(sk, &mreq); else ip_mc_leave_group(sk, &mreq); therefore we shoud check vxlan_group_used(), not its opposite, for igmp_join. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09net: rename busy poll MIB counterEliezer Tamir
Rename mib counter from "low latency" to "busy poll" v1 also moved the counter to the ip MIB (suggested by Shawn Bohrer) Eric Dumazet suggested that the current location is better. So v2 just renames the counter to fit the new naming convention. Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09net: sctp: trivial: update bug report in header commentDaniel Borkmann
With the restructuring of the lksctp.org site, we only allow bug reports through the SCTP mailing list linux-sctp@vger.kernel.org, not via SF, as SF is only used for web hosting and nothing more. While at it, also remove the obvious statement that bugs will be fixed and incooperated into the kernel. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09net: sctp: convert sctp_checksum_disable module param into sctp sysctlDaniel Borkmann
Get rid of the last module parameter for SCTP and make this configurable via sysctl for SCTP like all the rest of SCTP's configuration knobs. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09net: igmp: Allow user-space configuration of igmp unsolicited report intervalWilliam Manley
Adds the new procfs knobs: /proc/sys/net/ipv4/conf/*/igmpv2_unsolicited_report_interval /proc/sys/net/ipv4/conf/*/igmpv3_unsolicited_report_interval Which will allow userspace configuration of the IGMP unsolicited report interval (see below) in milliseconds. The defaults are 10000ms for IGMPv2 and 1000ms for IGMPv3 in accordance with RFC2236 and RFC3376. Background: If an IGMP join packet is lost you will not receive data sent to the multicast group so if no data arrives from that multicast group in a period of time after the IGMP join a second IGMP join will be sent. The delay between joins is the "IGMP Unsolicited Report Interval". Prior to this patch this value was hard coded in the kernel to 10s for IGMPv2 and 1s for IGMPv3. 10s is unsuitable for some use-cases, such as IPTV as it can cause channel change to be slow in the presence of packet loss. This patch allows the value to be overridden from userspace for both IGMPv2 and IGMPv3 such that it can be tuned accoding to the network. Tested with Wireshark and a simple program to join a (non-existent) multicast group. The distribution of timings for the second join differ based upon setting the procfs knobs. igmpvX_unsolicited_report_interval is intended to follow the pattern established by force_igmp_version, and while a procfs entry has been added a corresponding sysctl knob has not as it is my understanding that sysctl is deprecated[1]. [1]: http://lwn.net/Articles/247243/ Signed-off-by: William Manley <william.manley@youview.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09net: igmp: Don't flush routing cache when force_igmp_version is modifiedWilliam Manley
The procfs knob /proc/sys/net/ipv4/conf/*/force_igmp_version allows the IGMP protocol version to use to be explicitly set. As a side effect this caused the routing cache to be flushed as it was declared as a DEVINET_SYSCTL_FLUSHING_ENTRY. Flushing is unnecessary and this patch makes it so flushing does not occur. Requested by Hannes Frederic Sowa as he was reviewing other patches adding procfs entries. Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: William Manley <william.manley@youview.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09net: igmp: Reduce Unsolicited report interval to 1s when using IGMPv3William Manley
If an IGMP join packet is lost you will not receive data sent to the multicast group so if no data arrives from that multicast group in a period of time after the IGMP join a second IGMP join will be sent. The delay between joins is the "IGMP Unsolicited Report Interval". Previously this value was hard coded to be chosen randomly between 0-10s. This can be too long for some use-cases, such as IPTV as it can cause channel change to be slow in the presence of packet loss. The value 10s has come from IGMPv2 RFC2236, which was reduced to 1s in IGMPv3 RFC3376. This patch makes the kernel use the 1s value from the later RFC if we are operating in IGMPv3 mode. IGMPv2 behaviour is unaffected. Tested with Wireshark and a simple program to join a (non-existent) multicast group. The distribution of timings for the second join differ based upon setting /proc/sys/net/ipv4/conf/eth0/force_igmp_version. Signed-off-by: William Manley <william.manley@youview.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-098139cp: Fix skb leak in rx_status_loop failure path.Dave Jones
Introduced in cf3c4c03060b688cbc389ebc5065ebcce5653e96 ("8139cp: Add dma_mapping_error checking") Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09net: flow_dissector: add 802.1ad supportEric Dumazet
Same behavior than 802.1q : finds the encapsulated protocol and skip 32bit header. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09ip_gre: fix ipgre_header to return correct offsetTimo Teräs
Fix ipgre_header() (header_ops->create) to return the correct amount of bytes pushed. Most callers of dev_hard_header() seem to care only if it was success, but af_packet.c uses it as offset to the skb to copy from userspace only once. In practice this fixes packet socket sendto()/sendmsg() to gre tunnels. Regression introduced in c54419321455631079c7d6e60bc732dd0c5914c5 ("GRE: Refactor GRE tunneling code.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09Hostap: copying wrong data prism2_ioctl_giwaplist()Dan Carpenter
We want the data stored in "addr" and "qual", but the extra ampersands mean we are copying stack data instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09zd1201: do not use stack as URB transfer_bufferJussi Kivilinna
Patch fixes zd1201 not to use stack as URB transfer_buffer. URB buffers need to be DMA-able, which stack is not. Patch is only compile tested. Cc: stable@vger.kernel.org Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2013-08-09dlm: kill the unnecessary and wrong device_close()->recalc_sigpending()Oleg Nesterov
device_close()->recalc_sigpending() is not needed, sigprocmask() takes care of TIF_SIGPENDING correctly. And without ->siglock it is racy and wrong, it can wrongly clear TIF_SIGPENDING and miss a signal. But even with this patch device_close() is still buggy: 1. sigprocmask() should not be used, we have set_task_blocked(), but this is minor. 2. We should never block SIGKILL or SIGSTOP, and this is what the code tries to do. 3. This can't protect against SIGKILL or SIGSTOP anyway. Another thread can do signal_wake_up(), say, do_signal_stop() or complete_signal() or debugger. 4. sigprocmask(SIG_BLOCK, allsigs) doesn't necessarily clears TIF_SIGPENDING, say, freezing() or ->jobctl. 5. device_write() looks equally wrong by the same reason. Looks like, this tries to protect some wait_event_interruptible() logic from signals, it should be turned into uninterruptible wait. Or we need to implement something like signals_stop/start for such a use-case. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-09arm64: KVM: use 'int' instead of 'u32' for variable 'target' in kvm_host.h.Chen Gang
'target' will be set to '-1' in kvm_arch_vcpu_init(), and it need check 'target' whether less than zero or not in kvm_vcpu_initialized(). So need define target as 'int' instead of 'u32', just like ARM has done. The related warning: arch/arm64/kvm/../../../arch/arm/kvm/arm.c:497:2: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] Signed-off-by: Chen Gang <gang.chen@asianux.com> [Marc: reformated the Subject line to fit the series] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-08-09arm64: KVM: add missing dsb before invalidating Stage-2 TLBsMarc Zyngier
When performing a Stage-2 TLB invalidation, it is necessary to make sure the write to the page tables is observable by all CPUs. For this purpose, add dsb instructions to __kvm_tlb_flush_vmid_ipa and __kvm_flush_vm_context before doing the TLB invalidation itself. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-08-09arm64: KVM: perform save/restore of PAR_EL1Marc Zyngier
Not saving PAR_EL1 is an unfortunate oversight. If the guest performs an AT* operation and gets scheduled out before reading the result of the translation from PAREL1, it could become corrupted by another guest or the host. Saving this register is made slightly more complicated as KVM also uses it on the permission fault handling path, leading to an ugly "stash and restore" sequence. Fortunately, this is already a slow path so we don't really care. Also, Linux doesn't do any AT* operation, so Linux guests are not impacted by this bug. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-08-09netfilter: nf_conntrack: don't send destroy events from iteratorFlorian Westphal
Let nf_ct_delete handle delivery of the DESTROY event. Based on earlier patch from Pablo Neira. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-08-09Revert "HID: hid-logitech-dj: querying_devices was never set"Jiri Kosina
This reverts commit 407a2c2a4d85100c8c67953e4bac2f4a6c942335. Explanation provided by Benjamin Tissoires: Commit "HID: hid-logitech-dj, querying_devices was never set" activate a flag which guarantees that we do not ask the receiver for too many enumeration. When the flag is set, each following enumeration call is discarded (the usb request is not forwarded to the receiver). The flag is then released when the driver receive a pairing information event, which normally follows the enumeration request. However, the USB3 bug makes the driver think the enumeration request has been forwarded to the receiver. However, it is actually not the case because the USB stack returns -EPIPE. So, when a new unknown device appears, the workaround consisting in asking for a new enumeration is not working anymore: this new enumeration is discarded because of the flag, which is never reset. A solution could be to trigger a timeout before releasing it, but for now, let's just revert the patch. Reported-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Tested-by: Sune Mølgaard <sune@molgaard.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-09powerpc/tm: Fix context switching TAR, PPR and DSCR SPRsMichael Neuling
If a transaction is rolled back, the Target Address Register (TAR), Processor Priority Register (PPR) and Data Stream Control Register (DSCR) should be restored to the checkpointed values before the transaction began. Any changes to these SPRs inside the transaction should not be visible in the abort handler. Currently Linux doesn't save or restore the checkpointed TAR, PPR or DSCR. If we preempt a processes inside a transaction which has modified any of these, on process restore, that same transaction may be aborted we but we won't see the checkpointed versions of these SPRs. This adds checkpointed versions of these SPRs to the thread_struct and adds the save/restore of these three SPRs to the treclaim/trechkpt code. Without this if any of these SPRs are modified during a transaction, users may incorrectly see a speculated SPR value even if the transaction is aborted. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> [v3.10] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-09powerpc: Save the TAR register earlierMichael Neuling
This moves us to save the Target Address Register (TAR) a earlier in __switch_to. It introduces a new function save_tar() to do this. We need to save the TAR earlier as we will overwrite it in the transactional memory reclaim/recheckpoint path. We are going to do this in a subsequent patch which will fix saving the TAR register when it's modified inside a transaction. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> [v3.10] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit (git 2.34.1) at 2025-09-14 15:04:08 +0000