summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-03-16Merge branch 'master' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2022-03-16 1) Fix a kernel-info-leak in pfkey. From Haimin Zhang. 2) Fix an incorrect check of the return value of ipv6_skip_exthdr. From Sabrina Dubroca. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: esp6: fix check on ipv6_skip_exthdr's return value af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register ==================== Link: https://lore.kernel.org/r/20220316121142.3142336-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16thermal: int340x: Increase bitmap sizeSrinivas Pandruvada
The number of policies are 10, so can't be supported by the bitmap size of u8. Even though there are no platfoms with these many policies, but for correctness increase to u32. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Fixes: 16fc8eca1975 ("thermal/int340x_thermal: Add additional UUIDs") Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-16Documentation: thermal: DPTF DocumentationSrinivas Pandruvada
Document Intel Dynamic Platform and Thermal Framework (DPTF) ABI. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-16PM: hibernate: Honour ACPI hardware signature by default for virtual guestsDavid Woodhouse
The ACPI specification says that OSPM should refuse to restore from hibernate if the hardware signature changes, and should boot from scratch. However, real BIOSes often vary the hardware signature in cases where we *do* want to resume from hibernate, so Linux doesn't follow the spec by default. However, in a virtual environment there's no reason for the VMM to vary the hardware signature *unless* it wants to trigger a clean reboot as defined by the ACPI spec. So enable the check by default if a hypervisor is detected. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-16cpufreq: intel_pstate: Use firmware default EPPSrinivas Pandruvada
For some specific platforms (E.g. AlderLake) the balance performance EPP is updated from the hard coded value in the driver. This acts as the default and balance_performance EPP. The purpose of this EPP update is to reach maximum 1 core turbo frequency (when possible) out of the box. Although we can achieve the objective by using hard coded value in the driver, there can be other EPP which can be better in terms of power. But that will be very subjective based on platform and use cases. This is not practical to have a per platform specific default hard coded in the driver. If a platform wants to specify default EPP, it can be set in the firmware. If this EPP is not the chipset default of 0x80 (balance_perf_epp unless driver changed it) and more performance oriented but not 0, the driver can use this as the default and balanced_perf EPP. In this case no driver update is required every time there is some new platform and default EPP. If the firmware didn't update the EPP from the chipset default then the hard coded value is used as per existing implementation. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-16Merge tag 'wireless-2022-03-16' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v5.17 Third set of fixes for v5.17. We have only one revert to fix an ath10k regression. * tag 'wireless-2022-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: Revert "ath10k: drop beacon and probe response which leak from other channel" ==================== Link: https://lore.kernel.org/r/20220316130249.B5225C340EC@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16ice: add trace events for tx timestampsJacob Keller
We've previously run into many issues related to the latency of a Tx timestamp completion with the ice hardware. It can be difficult to determine the root cause of a slow Tx timestamp. To aid in this, introduce new trace events which capture timing data about when the driver reaches certain points while processing a transmit timestamp * ice_tx_tstamp_request: Trace when the stack initiates a new timestamp request. * ice_tx_tstamp_fw_req: Trace when the driver begins a read of the timestamp register in the work thread. * ice_tx_tstamp_fw_done: Trace when the driver finishes reading a timestamp register in the work thread. * ice_tx_tstamp_complete: Trace when the driver submits the skb back to the stack with a completed Tx timestamp. These trace events can be enabled using the standard trace event subsystem exposed by the ice driver. If they are disabled, they become no-ops with no run time cost. The following is a simple GNU AWK script which can highlight one potential way to use the trace events to capture latency data from the trace buffer about how long the driver takes to process a timestamp: ----- BEGIN { PREC=256 } # Detect requests /tx_tstamp_request/ { time=strtonum($4) skb=$7 # Store the time of request for this skb requests[skb] = time printf("skb %s: idx %d at %.6f\n", skb, idx, time) } # Detect completions /tx_tstamp_complete/ { time=strtonum($4) skb=$7 idx=$9 if (skb in requests) { latency = (time - requests[skb]) * 1000 printf("skb %s: %.3f to complete\n", skb, latency) if (latency > 4) { printf(">>> HIGH LATENCY <<<\n") } printf("\n") } else { printf("!!! skb %s (idx %d) at %.6f\n", skb, idx, time) } } ----- Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-16ice: fix return value check in ice_gnss.cYang Yingliang
kthread_create_worker() and tty_alloc_driver() return ERR_PTR() and never return NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 43113ff73453 ("ice: add TTY for GNSS module for E810T device") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-16fs: Remove aops ->set_page_dirtyMatthew Wilcox (Oracle)
With all implementations converted to ->dirty_folio, we can stop calling this fallback method and remove it entirely. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs
2022-03-16fb_defio: Use noop_dirty_folio()Matthew Wilcox (Oracle)
Remove the custom implementation of set_page_dirty. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs
2022-03-16fs: Convert __set_page_dirty_no_writeback to noop_dirty_folioMatthew Wilcox (Oracle)
This is a mechanical change. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs
2022-03-16fs: Convert __set_page_dirty_buffers to block_dirty_folioMatthew Wilcox (Oracle)
Convert all callers; mostly this is just changing the aops to point at it, but a few implementations need a little more work. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs
2022-03-16nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio()Matthew Wilcox (Oracle)
The comment about the page always being locked is wrong, so copy the locking protection from __set_page_dirty_buffers(). That means moving the call to nilfs_set_file_dirty() down the function so as to not acquire a new dependency between the mapping->private_lock and the ns_inode_lock. That might be a harmless dependency to add, but it's not necessary. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs Tested-by: David Howells <dhowells@redhat.com> # afs
2022-03-16ice: Fix inconsistent indenting in ice_switchWojciech Drewek
Fix the following warning as reported by smatch: smatch warnings: drivers/net/ethernet/intel/ice/ice_switch.c:5568 ice_find_dummy_packet() warn: inconsistent indenting Fixes: 9a225f81f540 ("ice: Support GTP-U and GTP-C offload in switchdev") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-16mt76: mt7921: move mt7921_init_hw in a dedicated workLorenzo Bianconi
Firmware initialization can take a while. Move mt7921_init_hw routine in a dedicated work in order to not slow down bootstrap process. Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: add mt7921u driverLorenzo Bianconi
Introduce support for MT7921U 802.11ax 2x2:2SS wireless devices. Tested-by: Sean Wang <sean.wang@mediatek.com> Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: move mt7921_usb_sdio_tx_status_data in mac common code.Lorenzo Bianconi
This is a preliminary patch to add mt7921u driver support. Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: move mt7921_usb_sdio_tx_complete_skb in common mac code.Lorenzo Bianconi
This is a preliminary patch to add mt7921u driver support. Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: move mt7921_usb_sdio_tx_prepare_skb in common mac codeLorenzo Bianconi
This is a preliminary patch to add mt7921u driver support. Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: update mt7921_skb_add_usb_sdio_hdr to support usbLorenzo Bianconi
This is a preliminary patch to add mt7921u driver support. Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: disable runtime pm for usbLorenzo Bianconi
Runtime-pm is not currently supported by usb driver Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: usb: introduce __mt76u_init utility routineLorenzo Bianconi
Introduce __mt76u_init unitility routine and move mt7615 usb bus ops into mt7615 module in order to allow specifying driver specific parameter. This is a preliminary patch to add usb support to mt7921 driver. Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: usb: add req_type to ___mt76u_wr signatureLorenzo Bianconi
This is a preliminary patch to add usb support to mt7921 driver. Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: usb: add req_type to ___mt76u_rr signatureLorenzo Bianconi
This is a preliminary patch to add usb support to mt7921 driver. Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7915: fix typos in commentsJulia Lawall
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7915: fix phy cap in mt7915_set_stream_he_txbf_caps()Peter Chiu
This patch fixes performance issue of beamforming tx on bandwidth 160MHz. Fixes: 99ad32a4ca3a ("mt76: mt7915: add support for MT7986") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7915: fix beamforming mib statsShayne Chen
Some of beamforming mib counters are moved to different offsets or registers in newer chipsets. Fixes: 99ad32a4ca3a ("mt76: mt7915: add support for MT7986") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7915: set band1 TGID field in tx descriptorShayne Chen
Set proper group index of tx descriptor for band1. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: fix invalid rssi reportDeren Wu
Drop invalid rssi value to calculate a reasonable report Fixes: 4550fb9e9810 ("mt76: improve signal strength reporting") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: use le32/16_get_bits() whenever possibleRyder Lee
Switch to use le32/16_get_bits() to simplfy codes and specify the size explicitly to avoid potential issues. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: connac: make read-only array ba_range static constColin Ian King
Don't populate the read-only array ba_range on the stack but instead make it static const. Also makes the object code a little smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7915: check for devm_pinctrl_get() failureDan Carpenter
If devm_pinctrl_get() fails then it leads to an error pointer dereference. Add a check to prevent that. Fixes: 99ad32a4ca3a ("mt76: mt7915: add support for MT7986") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: get rid of mt7921_wait_for_mcu_init declarationLorenzo Bianconi
mt7921_wait_for_mcu_init is no longer used. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7915: add txpower init for 6GHzShayne Chen
Add support to init txpower values of 6GHz band. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7915: fix eeprom fields of txpower init valuesShayne Chen
A-die 7976 has different offset and uses different channel group definition on txpower init values. Fixes: 99ad32a4ca3a ("mt76: mt7915: add support for MT7986") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7915: add 6 GHz supportMeiChia Chiu
Basic 6 GHz support is added to mt76. Modification includes: 1. Add 6 GHz E2P definition 2. Register 6 GHz HE cap 3. Refactor existing code of adding a STA This adds support for Wi-Fi 6E on MT7986/MT7916. Detailed link: https://www.mediatek.com/products/mediatek-filogic-830 Detailed link: https://www.mediatek.com/products/products/broadband-wifi/mediatek-filogic-630 Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <Shayne.Chen@mediatek.com> Signed-off-by: Peter Chiu <Chui-Hao.Chiu@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: connac: add 6 GHz support for wtbl and starec configurationMeiChia Chiu
Since there are no HT & VHT IEs being sent in 6ghz, some capabilities judgement and parsing for wtbl & starec configuration should be modified to reflect such changes. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7915: allow beaconing on all chainsRyder Lee
This improves rate reach performance on units with polarized antennas. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: fix monitor mode crash with sdio driverDeren Wu
mt7921s driver may receive frames with fragment buffers. If there is a CTS packet received in monitor mode, the payload is 10 bytes only and need 6 bytes header padding after RXD buffer. However, only RXD in the first linear buffer, if we pull buffer size RXD-size+6 bytes with skb_pull(), that would trigger "BUG_ON(skb->len < skb->data_len)" in __skb_pull(). To avoid the nonlinear buffer issue, enlarge the RXD size from 128 to 256 to make sure all MCU operation in linear buffer. [ 52.007562] kernel BUG at include/linux/skbuff.h:2313! [ 52.007578] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 52.007987] pc : skb_pull+0x48/0x4c [ 52.008015] lr : mt7921_queue_rx_skb+0x494/0x890 [mt7921_common] [ 52.008361] Call trace: [ 52.008377] skb_pull+0x48/0x4c [ 52.008400] mt76s_net_worker+0x134/0x1b0 [mt76_sdio 35339a92c6eb7d4bbcc806a1d22f56365565135c] [ 52.008431] __mt76_worker_fn+0xe8/0x170 [mt76 ef716597d11a77150bc07e3fdd68eeb0f9b56917] [ 52.008449] kthread+0x148/0x3ac [ 52.008466] ret_from_fork+0x10/0x30 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: fix mt7921_queues_acq implementationLorenzo Bianconi
Fix mt7921_queues_acq implementation according to the vendor sdk. Fixes: 474a9f21e2e20 ("mt76: mt7921: add debugfs support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: fix xmit-queue dump for usb and sdioLorenzo Bianconi
Use proper xmit queue handler to dump queue stats. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: make mt7921_init_tx_queues staticLorenzo Bianconi
mt7921 is only used in mt7921_dma_init routine. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: split single ldpc cap bit into bitsMeiChia Chiu
The original single LDPC cap bit cannot be used to differentiate LDPC cap in each PHY mode. This modification split the single bit into 3 bits, ht_ldpc, vht_ldpc, and he_ldpc. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Suggested-by: Money Wang <Money.Wang@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7915: fix DFS no radar detection eventEvelyn Tsai
Driver needs to carry region definition when radar detection starts. Need to remap nl80211 DFS regions to chip region definition. Signed-off-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Rubio Lu <Rubio-DW.Lu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: use mt76_hw instead of open coding itSean Wang
use mt76_hw instead of open coding it Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: fix up the monitor modeSean Wang
Properly set up the monitor mode the firmware can support to fix up RTS/CTS and beacon frames cannot be captured and forwarded to the host. Tested-by: Deren Wu <deren.wu@mediatek.com> Tested-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7663u: introduce mt7663u_mcu_power_on routineLorenzo Bianconi
Introduce mt7663u_mcu_power_on utility routine since the code is shared between mt7663u_mcu_init() and mt7663u_probe(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7615: honor ret from mt7615_mcu_restart in mt7663u_mcu_initLorenzo Bianconi
Check return value of mt7615_mcu_restart routine in mt7663u_mcu_init(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16spi: tegra20: Use of_device_get_match_data()Minghao Chi
Use of_device_get_match_data() to simplify the code. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220315023138.2118293-1-chi.minghao@zte.com.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2022-03-16ASoC: ak4642: Use of_device_get_match_data()Minghao Chi
Use of_device_get_match_data() to simplify the code. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220315023226.2118354-1-chi.minghao@zte.com.cn Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-24 10:51:51 +0000