summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-05-21misc: amd-sbi: Add support for read MCA register protocolAkshay Gupta
- AMD provides custom protocol to read Machine Check Architecture(MCA) registers over sideband. The information is accessed for range of MCA registers by passing register address and thread ID to the protocol. MCA register read command using the register address to access Core::X86::Msr::MCG_CAP which determines the number of MCA banks. Access is read-only Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Signed-off-by: Akshay Gupta <akshay.gupta@amd.com> Link: https://lore.kernel.org/r/20250428063034.2145566-9-akshay.gupta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21misc: amd-sbi: Add support for CPUID protocolAkshay Gupta
- AMD provides custom protocol to read Processor feature capabilities and configuration information through side band. The information is accessed by providing CPUID Function, extended function and thread ID to the protocol. Undefined function returns 0. Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Signed-off-by: Akshay Gupta <akshay.gupta@amd.com> Link: https://lore.kernel.org/r/20250428063034.2145566-8-akshay.gupta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21misc: amd-sbi: Add support for AMD_SBI IOCTLAkshay Gupta
The present sbrmi module only support reporting power via hwmon. However, AMD data center range of processors support various system management functionality using custom protocols defined in Advanced Platform Management Link (APML) specification. Register a miscdevice, which creates a device /dev/sbrmiX with an IOCTL interface for the user space to invoke the APML Mailbox protocol, which is already defined in sbrmi_mailbox_xfer(). The APML protocols depend on a set of RMI registers. Having an IOCTL as a single entry point will help in providing synchronization among these protocols as multiple transactions on RMI register set may create race condition. Support for other protocols will be added in subsequent patches. APML mailbox protocol returns additional error codes written by SMU firmware in the out-bound register 0x37. These errors include, invalid core, message not supported over platform and others. This additional error codes can be used to provide more details to user space. Open-sourced and widely used https://github.com/amd/esmi_oob_library will continue to provide user-space programmable API. Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Signed-off-by: Akshay Gupta <akshay.gupta@amd.com> Link: https://lore.kernel.org/r/20250428063034.2145566-7-akshay.gupta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21misc: amd-sbi: Optimize the wait condition for mailbox command completionAkshay Gupta
- optimize the wait condition to indicate command completion by replacing the do while loop with regmap subsystem API regmap_read_poll_timeout() Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Signed-off-by: Akshay Gupta <akshay.gupta@amd.com> Link: https://lore.kernel.org/r/20250428063034.2145566-6-akshay.gupta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21misc: amd-sbi: Use regmap subsystemAkshay Gupta
- regmap subsystem provides multiple benefits over direct smbus APIs - subsystem adds another abstraction layer on top of struct i2c_client to make it easy to read or write registers. - The subsystem can be helpful in following cases - Different types of bus (i2c/i3c), we have plans to support i3c. - Different Register address size (1byte/2byte) Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Signed-off-by: Akshay Gupta <akshay.gupta@amd.com> Link: https://lore.kernel.org/r/20250428063034.2145566-5-akshay.gupta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21misc: amd-sbi: Move hwmon device sensor as separate entityAkshay Gupta
- Move hwmon device sensor to misc as only power is reported through hwmon sensor. Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Signed-off-by: Akshay Gupta <akshay.gupta@amd.com> Link: https://lore.kernel.org/r/20250428063034.2145566-4-akshay.gupta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21misc: amd-sbi: Move protocol functionality to core fileAkshay Gupta
- This is done to utilize the protocol functionality into other domains. - Increase the scalability of the module with different bus(i2c/i3c) Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Signed-off-by: Akshay Gupta <akshay.gupta@amd.com> Link: https://lore.kernel.org/r/20250428063034.2145566-3-akshay.gupta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21hwmon/misc: amd-sbi: Move core sbrmi from hwmon to miscAkshay Gupta
This is done to support other functionality provided by the SBRMI, which does not fit in the hwmon subsystem. Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Signed-off-by: Akshay Gupta <akshay.gupta@amd.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20250428063034.2145566-2-akshay.gupta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21misc: microchip: pci1xxxx: Add GPIO Wakeup SupportRengarajan S
The patch adds PIO asynchronous wakeup support while PIO PCIe Endpoint function is in D3 state. When such a wakeup event occurs, the PIO asserts a PIO_WAKE signal, which in turn triggers PCIe Wake signaling. This wake request should trigger the PCIe Host to take the PIO PCIe Endpoint function into the D0 device state. The device supports up to 96 PIOs distributed across three GPIO banks. During suspend and resume, the driver checks the status of each GPIO bank to determine if any GPIOs with wake masking enabled have triggered an event. Upon resume, PIOxx_STATUS register must be cleared by software explicitly to enable the detection of the next transition. Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://lore.kernel.org/r/20250513091557.3660-3-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21misc: microchip: pci1xxxx: Add PCIe Hot reset disable support for Rev C0 and ↵Rengarajan S
later devices Systems that issue PCIe hot reset requests during a suspend/resume cycle cause PCI1XXXX device revisions prior to C0 to get its GPIO configuration registers reset to hardware default values. This results in device inaccessibility and GPIO read/write failure. Starting with Revision C0, support was added in the device hardware (via the Hot Reset Disable Bit) to allow resetting only the PCIe interface and its associated logic, but preserving the GPIO configurations during a hot reset. This patch enables the hot reset disable feature during suspend/ resume for C0 and later revisions of the device. mchp_pci1xxxx_gpio is an auxiliary child of mchp_pci1xxxx_gp and does not have access to system register address space for reading the device revision. Hence, the device revision is retrieved directly from PCIe config space. Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://lore.kernel.org/r/20250513091557.3660-2-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21misc: lis3lv02d: Fix correct sysfs directory path for lis3lv02dRoxana Nicolescu
The lis3lv02d driver does not create a platform device anymore. It was recently changed to use a faux device instead. Therefore the sysfs path has changed from /sys/devices/platform/lis3lv02d to /sys/devices/faux/lis3lv02d. Fixes: 3b18ccb5472b ("misc: lis3lv02d: convert to use faux_device") Signed-off-by: Roxana Nicolescu <nicolescu.roxana@protonmail.com> Link: https://lore.kernel.org/r/20250506110002.36477-1-nicolescu.roxana@protonmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21binder: Create safe versions of binder log filesTiffany Y. Yang
Binder defines several seq_files that can be accessed via debugfs or binderfs. Some of these files (e.g., 'state' and 'transactions') contain more granular information about binder's internal state that is helpful for debugging, but they also leak userspace address data through user-defined 'cookie' or 'ptr' values. Consequently, access to these files must be heavily restricted. Add two new files, 'state_hashed' and 'transactions_hashed', that reproduce the information in the original files but use the kernel's raw pointer obfuscation to hash any potential user addresses. This approach allows systems to grant broader access to the new files without having to change the security policy around the existing ones. In practice, userspace populates these fields with user addresses, but within the driver, these values only serve as unique identifiers for their associated binder objects. Consequently, binder logs can obfuscate these values and still retain meaning. While this strategy prevents leaking information about the userspace memory layout in the existing log files, it also decouples log messages about binder objects from their user-defined identifiers. Acked-by: Carlos Llamas <cmllamas@google.com> Tested-by: Carlos Llamas <cmllamas@google.com> Signed-off-by: "Tiffany Y. Yang" <ynaffit@google.com> Link: https://lore.kernel.org/r/20250510013435.1520671-7-ynaffit@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21binder: Refactor binder_node print synchronizationTiffany Y. Yang
The binder driver outputs information about each dead binder node by iterating over the dead nodes list, and it prints the state of each live node in the system by traversing each binder_proc's proc->nodes tree. Both cases require similar logic to maintain the global lock ordering while accessing each node. Create a helper function to synchronize around printing binder nodes in a list. Opportunistically make minor cosmetic changes to binder print functions. Acked-by: Carlos Llamas <cmllamas@google.com> Signed-off-by: "Tiffany Y. Yang" <ynaffit@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250510013435.1520671-5-ynaffit@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21binder: fix use-after-free in binderfs_evict_inode()Dmitry Antipov
Running 'stress-ng --binderfs 16 --timeout 300' under KASAN-enabled kernel, I've noticed the following: BUG: KASAN: slab-use-after-free in binderfs_evict_inode+0x1de/0x2d0 Write of size 8 at addr ffff88807379bc08 by task stress-ng-binde/1699 CPU: 0 UID: 0 PID: 1699 Comm: stress-ng-binde Not tainted 6.14.0-rc7-g586de92313fc-dirty #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1c2/0x2a0 ? __pfx_dump_stack_lvl+0x10/0x10 ? __pfx__printk+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __virt_addr_valid+0x18c/0x540 ? __virt_addr_valid+0x469/0x540 print_report+0x155/0x840 ? __virt_addr_valid+0x18c/0x540 ? __virt_addr_valid+0x469/0x540 ? __phys_addr+0xba/0x170 ? binderfs_evict_inode+0x1de/0x2d0 kasan_report+0x147/0x180 ? binderfs_evict_inode+0x1de/0x2d0 binderfs_evict_inode+0x1de/0x2d0 ? __pfx_binderfs_evict_inode+0x10/0x10 evict+0x524/0x9f0 ? __pfx_lock_release+0x10/0x10 ? __pfx_evict+0x10/0x10 ? do_raw_spin_unlock+0x4d/0x210 ? _raw_spin_unlock+0x28/0x50 ? iput+0x697/0x9b0 __dentry_kill+0x209/0x660 ? shrink_kill+0x8d/0x2c0 shrink_kill+0xa9/0x2c0 shrink_dentry_list+0x2e0/0x5e0 shrink_dcache_parent+0xa2/0x2c0 ? __pfx_shrink_dcache_parent+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 do_one_tree+0x23/0xe0 shrink_dcache_for_umount+0xa0/0x170 generic_shutdown_super+0x67/0x390 kill_litter_super+0x76/0xb0 binderfs_kill_super+0x44/0x90 deactivate_locked_super+0xb9/0x130 cleanup_mnt+0x422/0x4c0 ? lockdep_hardirqs_on+0x9d/0x150 task_work_run+0x1d2/0x260 ? __pfx_task_work_run+0x10/0x10 resume_user_mode_work+0x52/0x60 syscall_exit_to_user_mode+0x9a/0x120 do_syscall_64+0x103/0x210 ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0xcac57b Code: c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 f3 0f 1e fa 31 f6 e9 05 00 00 00 0f 1f 44 00 00 f3 0f 1e fa b8 RSP: 002b:00007ffecf4226a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 00007ffecf422720 RCX: 0000000000cac57b RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007ffecf422850 RBP: 00007ffecf422850 R08: 0000000028d06ab1 R09: 7fffffffffffffff R10: 3fffffffffffffff R11: 0000000000000246 R12: 00007ffecf422718 R13: 00007ffecf422710 R14: 00007f478f87b658 R15: 00007ffecf422830 </TASK> Allocated by task 1705: kasan_save_track+0x3e/0x80 __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x213/0x3e0 binderfs_binder_device_create+0x183/0xa80 binder_ctl_ioctl+0x138/0x190 __x64_sys_ioctl+0x120/0x1b0 do_syscall_64+0xf6/0x210 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1705: kasan_save_track+0x3e/0x80 kasan_save_free_info+0x46/0x50 __kasan_slab_free+0x62/0x70 kfree+0x194/0x440 evict+0x524/0x9f0 do_unlinkat+0x390/0x5b0 __x64_sys_unlink+0x47/0x50 do_syscall_64+0xf6/0x210 entry_SYSCALL_64_after_hwframe+0x77/0x7f This 'stress-ng' workload causes the concurrent deletions from 'binder_devices' and so requires full-featured synchronization to prevent list corruption. I've found this issue independently but pretty sure that syzbot did the same, so Reported-by: and Closes: should be applicable here as well. Cc: stable@vger.kernel.org Reported-by: syzbot+353d7b75658a95aa955a@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=353d7b75658a95aa955a Fixes: e77aff5528a18 ("binderfs: fix use-after-free in binder_devices") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Carlos Llamas <cmllamas@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250517170957.1317876-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21nvmem: Add apple-spmi-nvmem driverHector Martin
Add a driver for a series of SPMI-attached PMICs present on Apple devices Reviewed-by: Neal Gompa <neal@gompa.dev> Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Hector Martin <marcan@marcan.st> Co-developed-by: Sasha Finkelstein <fnkl.kernel@gmail.com> Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com> Signed-off-by: Srinivas Kandagatla <srini@kernel.org> Link: https://lore.kernel.org/r/20250509122452.11827-4-srini@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21dt-bindings: spmi: Add Apple SPMI NVMEMSasha Finkelstein
Add bindings for exposing SPMI registers of Apple PMICs as NVMEM cells Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Srinivas Kandagatla <srini@kernel.org> Link: https://lore.kernel.org/r/20250509122452.11827-3-srini@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21nvmem: Remove unused nvmem cell table supportGeert Uytterhoeven
Board files are deprecated by DT, and the last user of nvmem_add_cell_table() was removed by commit 2af4fcc0d3574482 ("ARM: davinci: remove unused board support") in v6.3. Hence remove all support for nvmem cell tables, and update the documentation. Device drivers can still register a single cell using nvmem_add_one_cell() (which was not documented before). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Srinivas Kandagatla <srini@kernel.org> Link: https://lore.kernel.org/r/20250509122452.11827-2-srini@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21nvmem: zynqmp_nvmem: unbreak driver after cleanupPeter Korsgaard
Commit 29be47fcd6a0 ("nvmem: zynqmp_nvmem: zynqmp_nvmem_probe cleanup") changed the driver to expect the device pointer to be passed as the "context", but in nvmem the context parameter comes from nvmem_config.priv which is never set - Leading to null pointer exceptions when the device is accessed. Fixes: 29be47fcd6a0 ("nvmem: zynqmp_nvmem: zynqmp_nvmem_probe cleanup") Cc: stable <stable@kernel.org> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Reviewed-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Srinivas Kandagatla <srini@kernel.org> Link: https://lore.kernel.org/r/20250509122407.11763-3-srini@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21nvmem: rmem: select CONFIG_CRC32Arnd Bergmann
The newly added crc checking leads to a link failure if CRC32 itself is disabled: x86_64-linux-ld: vmlinux.o: in function `rmem_eyeq5_checksum': rmem.c:(.text+0x52341b): undefined reference to `crc32_le_arch' Fixes: 7e606c311f70 ("nvmem: rmem: add CRC validation for Mobileye EyeQ5 NVMEM") Cc: stable <stable@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Srinivas Kandagatla <srini@kernel.org> Link: https://lore.kernel.org/r/20250509122407.11763-2-srini@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21mux: MAINTAINERS: Mark as Odd FixesKrzysztof Kozlowski
Over last year, several patches for drivers/mux/ were not picked up, even after multiple pings or resends, so mark the mux subsystem as odd fixes to clarify actual status of lack of maintainers with dedicated time and indicate that someone could help here. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250501175303.144102-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21Merge tag 'iio-fixes-for-6.15b' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO: 2nd set of fixes for 6.15 (or 6.16 merge window) Usual mixed bag. adi,ad4851 - Avoid a buffer overrun due to bug in pointer arithmetic. adi,ad7173 - Fix compiling if gpiolib is not enabled adi,ad7606 - Fix raw reads for 18-bit chips by ensuring we mask out upper bits as some SPI controllers do not do so for 18bit words. - Fix wrong masking for register writes. adi,ad7944 - Mask high bits for raw reads. adi,axi-adc - Add check on whether the busy flag has cleared before first access. invensense,icm42600 - Fix the temperature offset to take scale into account. nxp,fxls8962af - Fix temperature to be in milli degrees Celsius not degrees. - Fix sign of temperature channel. * tag 'iio-fixes-for-6.15b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: accel: fxls8962af: Fix temperature scan element sign iio: accel: fxls8962af: Fix temperature calculation iio: adc: ad7944: mask high bits on direct read iio: adc: ad4851: fix ad4858 chan pointer handling iio: imu: inv_icm42600: Fix temperature calculation iio: dac: adi-axi-dac: fix bus read iio: adc: ad7606_spi: fix reg write value mask iio: adc: ad7606: fix raw read for 18-bit chips iio: adc: ad7173: fix compiling without gpiolib
2025-05-21w1: Avoid -Wflex-array-member-not-at-end warningsGustavo A. R. Silva
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. Use the `DEFINE_RAW_FLEX()` helper for on-stack definitions of a flexible structure where the size of the flexible-array member is known at compile-time, and refactor the rest of the code, accordingly. So, with these changes, fix the following warnings: drivers/w1/w1_netlink.c:198:31: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] drivers/w1/w1_netlink.c:219:31: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Reviewed-by: Kees Cook <kees@kernel.org> Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org> Link: https://lore.kernel.org/r/Z_RflBe5iDGTMFjV@kspp Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250513105326.27385-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-21Merge tag 'mux-drv-6.16' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into char-misc-next Krzysztof writes: Mux drivers for v6.16 Few cleanups and fixes for the mux drivers: 1. Simplify with spi_get_device_match_data(). 2. Fix -Wunused-const-variable and -Wvoid-pointer-to-enum-cast warnings. 3. GPIO mux: add optional regulator for Lenovo T14s laptop headset. 4. MMIO mux: avoid using syscon's device_node_to_regmap(), due to changes in the syscon code. * tag 'mux-drv-6.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux: mux: adgs1408: fix Wvoid-pointer-to-enum-cast warning mux: gpio: add optional regulator support dt-bindings: mux: add optional regulator binding to gpio mux mux: mmio: Do not use syscon helper to build regmap mux: adg792a: remove incorrect of_match_ptr annotation mux: adgs1408: simplify with spi_get_device_match_data() mux: mmio: Add missing word in error message
2025-05-21Merge tag 'mhi-for-v6.16' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next Manivannan writes: MHI Host ======== - Fix conflict between MHI power up and SYSERR state transitions by issuing MHI reset only if the device is in SYSERR state while in SBL/PBL EEs. The device won't respond to reset if it is not in SYSERR state in SBL/PBL EEs. - Remove redundant call to pci_assign_resource() since PCI core calls this API internally. - Add Telit FN920C04 modem which is based on Qcom SDX35 chipset. * tag 'mhi-for-v6.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi: bus: mhi: host: pci_generic: Add Telit FN920C04 modem support bus: mhi: host: pci_generic: Remove redundant assign resource usage bus: mhi: host: Fix conflict between power_up and SYSERR
2025-05-21Merge tag 'mhi-fixes-for-v6.15' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next Manivannan writes: MHI Endpoint ============ - Increment the rd_offset after writing the buffer to avoid MHI host accessing the incomplete/wrong buffer element. * tag 'mhi-fixes-for-v6.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi: bus: mhi: ep: Update read pointer only after buffer is written
2025-05-21Merge tag 'fpga-for-6.16-rc1' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next Xu writes: FPGA Manager changes for 6.16-rc1 - Peter hands over the maintain role of m10bmc-sec driver to Matthew. - Qasim's change fix potential NULL pointer for fpga test. All patches have been reviewed on the mailing list, and have been in the last linux-next releases (as part of our for-next branch). Signed-off-by: Xu Yilun <yilun.xu@intel.com> * tag 'fpga-for-6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga: fpga: fix potential null pointer deref in fpga_mgr_test_img_load_sgt() fpga: m10bmc-sec: change contact for secure update driver
2025-05-21Merge tag 'counter-updates-for-6.16' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next William writes: Counter updates for 6.16 An update to allow for larger count values in interrupt-cnt. * tag 'counter-updates-for-6.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter: counter: interrupt-cnt: Convert atomic_t -> atomic_long_t
2025-05-21Merge tag 'counter-fixes-for-6.15' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next William writes: Counter fixes for 6.15 A fix to prevent a race condition when accessing the Count enable component in interrupt-cnt. * tag 'counter-fixes-for-6.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wbg/counter: counter: interrupt-cnt: Protect enable/disable OPs with mutex
2025-05-21rust: miscdevice: fix typo in MiscDevice::ioctl documentationChristian Schrefl
Fixes one small typo (`utilties` to `utilities`) in the documentation of `MiscDevice::ioctl`. Fixes: f893691e7426 ("rust: miscdevice: add base miscdevice abstraction") Signed-off-by: Christian Schrefl <chrisi.schrefl@gmail.com> Reviewed-by: Benno Lossin <lossin@kernel.org> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250517-rust_miscdevice_fix_typo-v1-1-8c30a6237ba9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-15iio: accel: fxls8962af: Fix temperature scan element signSean Nyekjaer
Mark the temperature element signed, data read from the TEMP_OUT register is in two's complement format. This will avoid the temperature being mishandled and miss displayed. Fixes: a3e0b51884ee ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers") Suggested-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Signed-off-by: Sean Nyekjaer <sean@geanix.com> Link: https://patch.msgid.link/20250505-fxls-v4-2-a38652e21738@geanix.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-15iio: accel: fxls8962af: Fix temperature calculationSean Nyekjaer
According to spec temperature should be returned in milli degrees Celsius. Add in_temp_scale to calculate from Celsius to milli Celsius. Fixes: a3e0b51884ee ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers") Cc: stable@vger.kernel.org Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Signed-off-by: Sean Nyekjaer <sean@geanix.com> Link: https://patch.msgid.link/20250505-fxls-v4-1-a38652e21738@geanix.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-15iio: adc: ad7944: mask high bits on direct readDavid Lechner
Apply a mask to the raw value received over the SPI bus for unsigned direct reads. As we found recently, SPI controllers may not set unused bits to 0 when reading with bits_per_word != {8,16,32}. The ad7944 uses bits_per_word of 14 and 18, so we need to mask the value to be sure we returning the correct value to userspace during a direct read. Fixes: d1efcf8871db ("iio: adc: ad7944: add driver for AD7944/AD7985/AD7986") Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250505-iio-adc-ad7944-max-high-bits-on-direct-read-v1-1-b173facceefe@baylibre.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-14bus: mhi: host: pci_generic: Add Telit FN920C04 modem supportDaniele Palmas
Add SDX35 based modem Telit FN920C04. $ lspci -vv 01:00.0 Unassigned class [ff00]: Qualcomm Device 011a Subsystem: Device 1c5d:2020 Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://patch.msgid.link/20250401093458.2953872-1-dnlplm@gmail.com
2025-05-14bus: mhi: host: pci_generic: Remove redundant assign resource usageSubramanian Ananthanarayanan
Avoid redundant usage of pci_assign_resource for BAR allocation. This is already taken care by PCI framework. Invocation of this API leads to unnecessary relocation of BAR space to a new memory address. Signed-off-by: Subramanian Ananthanarayanan <quic_skananth@quicinc.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com> Link: https://patch.msgid.link/20250416-remove_assin_resource-v1-1-e92dd361fa0a@quicinc.com
2025-05-14bus: mhi: host: Fix conflict between power_up and SYSERRJeffrey Hugo
When mhi_async_power_up() enables IRQs, it is possible that we could receive a SYSERR notification from the device if the firmware has crashed for some reason. Then the SYSERR notification queues a work item that cannot execute until the pm_mutex is released by mhi_async_power_up(). So the SYSERR work item will be pending. If mhi_async_power_up() detects the SYSERR, it will handle it. If the device is in PBL, then the PBL state transition event will be queued, resulting in a work item after the pending SYSERR work item. Once mhi_async_power_up() releases the pm_mutex, the SYSERR work item can run. It will blindly attempt to reset the MHI state machine, which is the recovery action for SYSERR. PBL/SBL are not interrupt driven and will ignore the MHI Reset unless SYSERR is actively advertised. This will cause the SYSERR work item to timeout waiting for reset to be cleared, and will leave the host state in SYSERR processing. The PBL transition work item will then run, and immediately fail because SYSERR processing is not a valid state for PBL transition. This leaves the device uninitialized. This issue has a fairly unique signature in the kernel log: mhi mhi3: Requested to power ON Qualcomm Cloud AI 100 0000:36:00.0: Fatal error received from device. Attempting to recover mhi mhi3: Power on setup success mhi mhi3: Device failed to exit MHI Reset state mhi mhi3: Device MHI is not in valid state We cannot remove the SYSERR handling from mhi_async_power_up() because the device may be in the SYSERR state, but we missed the notification as the irq was fired before irqs were enabled. We also can't queue the SYSERR work item from mhi_async_power_up() if SYSERR is detected because that may result in a duplicate work item, and cause the same issue since the duplicate item will blindly issue MHI reset even if SYSERR is no longer active. Instead, add a check in the SYSERR work item to make sure that MHI reset is only issued if the device is in SYSERR state for PBL or SBL EEs. Fixes: a6e2e3522f29 ("bus: mhi: core: Add support for PM state transitions") Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Troy Hanson <quic_thanson@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250328163526.3365497-1-jeff.hugo@oss.qualcomm.com
2025-05-13Merge 6.15-rc6 into char-misc-nextGreg Kroah-Hartman
We need the iio/hyperv fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-11Linux 6.15-rc6v6.15-rc6Linus Torvalds
2025-05-11Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "ARM: - Avoid use of uninitialized memcache pointer in user_mem_abort() - Always set HCR_EL2.xMO bits when running in VHE, allowing interrupts to be taken while TGE=0 and fixing an ugly bug on AmpereOne that occurs when taking an interrupt while clearing the xMO bits (AC03_CPU_36) - Prevent VMMs from hiding support for AArch64 at any EL virtualized by KVM - Save/restore the host value for HCRX_EL2 instead of restoring an incorrect fixed value - Make host_stage2_set_owner_locked() check that the entire requested range is memory rather than just the first page RISC-V: - Add missing reset of smstateen CSRs x86: - Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid causing problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to sanitize the VMCB as its state is undefined after SHUTDOWN, emulating INIT is the least awful choice). - Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM KVM doesn't goof a sanity check in the future. - Free obsolete roots when (re)loading the MMU to fix a bug where pre-faulting memory can get stuck due to always encountering a stale root. - When dumping GHCB state, use KVM's snapshot instead of the raw GHCB page to print state, so that KVM doesn't print stale/wrong information. - When changing memory attributes (e.g. shared <=> private), add potential hugepage ranges to the mmu_invalidate_range_{start,end} set so that KVM doesn't create a shared/private hugepage when the the corresponding attributes will become mixed (the attributes are commited *after* KVM finishes the invalidation). - Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM has at least one active VM. Effectively BP_SPEC_REDUCE when KVM is loaded led to very measurable performance regressions for non-KVM workloads" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Set/clear SRSO's BP_SPEC_REDUCE on 0 <=> 1 VM count transitions KVM: arm64: Fix memory check in host_stage2_set_owner_locked() KVM: arm64: Kill HCRX_HOST_FLAGS KVM: arm64: Properly save/restore HCRX_EL2 KVM: arm64: selftest: Don't try to disable AArch64 support KVM: arm64: Prevent userspace from disabling AArch64 support at any virtualisable EL KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort() KVM: x86/mmu: Prevent installing hugepages when mem attributes are changing KVM: SVM: Update dump_ghcb() to use the GHCB snapshot fields KVM: RISC-V: reset smstateen CSRs KVM: x86/mmu: Check and free obsolete roots in kvm_mmu_reload() KVM: x86: Check that the high 32bits are clear in kvm_arch_vcpu_ioctl_run() KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception
2025-05-11Merge tag 'mips-fixes_6.15_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - Fix delayed timers - Fix NULL pointer deref - Fix wrong range check * tag 'mips-fixes_6.15_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Fix MAX_REG_OFFSET MIPS: CPS: Fix potential NULL pointer dereferences in cps_prepare_cpus() MIPS: rename rollback_handler with skipover_handler MIPS: Move r4k_wait() to .cpuidle.text section MIPS: Fix idle VS timer enqueue
2025-05-11Merge tag 'x86-urgent-2025-05-11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "Fix a boot regression on very old x86 CPUs without CPUID support" * tag 'x86-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Consolidate the loader enablement checking
2025-05-11Merge tag 'timers-urgent-2025-05-11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc timers fixes from Ingo Molnar: - Fix time keeping bugs in CLOCK_MONOTONIC_COARSE clocks - Work around absolute relocations into vDSO code that GCC erroneously emits in certain arm64 build environments - Fix a false positive lockdep warning in the i8253 clocksource driver * tag 'timers-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/i8253: Use raw_spinlock_irqsave() in clockevent_i8253_disable() arm64: vdso: Work around invalid absolute relocations from GCC timekeeping: Prevent coarse clocks going backwards
2025-05-11Merge tag 'input-for-v6.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G, Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode - a number of new controllers added to xpad driver: HORI Drum controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller, 8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode Controller, Hyperkin DuchesS Xbox One controller - fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE Advanced and PDP Mirror's Edge Official controllers - fixes to xpad driver to properly handle "Share" button on some controllers - a fix for device initialization timing and for waking up the controller in cyttsp5 driver - a fix for hisi_powerkey driver to properly wake up from s2idle state - other assorted cleanups and fixes * tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - fix xpad_device sorting Input: xpad - add support for several more controllers Input: xpad - fix Share button on Xbox One controllers Input: xpad - fix two controller table values Input: hisi_powerkey - enable system-wakeup for s2idle Input: synaptics - enable InterTouch on Dell Precision M3800 Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5 Input: synaptics - enable InterTouch on Dynabook Portege X30L-G Input: synaptics - enable InterTouch on Dynabook Portege X30-D Input: synaptics - enable SMBus for HP Elitebook 850 G1 Input: mtk-pmic-keys - fix possible null pointer dereference Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller Input: cyttsp5 - fix power control issue on wakeup MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address Input: stmpe-ts - use module alias instead of device table Input: cyttsp5 - ensure minimum reset pulse width Input: sparcspkr - avoid unannotated fall-through input/joystick: magellan: Mark __nonstring look-up table
2025-05-11Merge tag 'fixes-2025-05-11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock fixes from Mike Rapoport: - Mark set_high_memory() as __init to fix section mismatch - Accept memory allocated in memblock_double_array() to mitigate crash of SNP guests * tag 'fixes-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock: Accept allocated memory before use in memblock_double_array() mm,mm_init: Mark set_high_memory as __init
2025-05-11iio: adc: ad4851: fix ad4858 chan pointer handlingAntoniu Miclaus
The pointer returned from ad4851_parse_channels_common() is incremented internally as each channel is populated. In ad4858_parse_channels(), the same pointer was further incremented while setting ext_scan_type fields for each channel. This resulted in indio_dev->channels being set to a pointer past the end of the allocated array, potentially causing memory corruption or undefined behavior. Fix this by iterating over the channels using an explicit index instead of incrementing the pointer. This preserves the original base pointer and ensures all channel metadata is set correctly. Fixes: 6250803fe2ec ("iio: adc: ad4851: add ad485x driver") Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250509101657.6742-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-10Input: xpad - fix xpad_device sortingVicki Pfau
A recent commit put one entry in the wrong place. This just moves it to the right place. Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20250328234345.989761-5-vi@endrift.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-05-10Input: xpad - add support for several more controllersVicki Pfau
This adds support for several new controllers, all of which include Share buttons: - HORI Drum controller - PowerA Fusion Pro 4 - 8BitDo Ultimate 3-mode Controller - Hyperkin DuchesS Xbox One controller - PowerA MOGA XP-Ultra controller Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20250328234345.989761-4-vi@endrift.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-05-10Input: xpad - fix Share button on Xbox One controllersVicki Pfau
The Share button, if present, is always one of two offsets from the end of the file, depending on the presence of a specific interface. As we lack parsing for the identify packet we can't automatically determine the presence of that interface, but we can hardcode which of these offsets is correct for a given controller. More controllers are probably fixable by adding the MAP_SHARE_BUTTON in the future, but for now I only added the ones that I have the ability to test directly. Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20250328234345.989761-2-vi@endrift.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-05-10Input: xpad - fix two controller table valuesVicki Pfau
Two controllers -- Mad Catz JOYTECH NEO SE Advanced and PDP Mirror's Edge Official -- were missing the value of the mapping field, and thus wouldn't detect properly. Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20250328234345.989761-1-vi@endrift.com Fixes: 540602a43ae5 ("Input: xpad - add a few new VID/PID combinations") Fixes: 3492321e2e60 ("Input: xpad - add multiple supported devices") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-05-10Input: hisi_powerkey - enable system-wakeup for s2idleUlf Hansson
To wake up the system from s2idle when pressing the power-button, let's convert from using pm_wakeup_event() to pm_wakeup_dev_event(), as it allows us to specify the "hard" in-parameter, which needs to be set for s2idle. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20250306115021.797426-1-ulf.hansson@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-05-10Merge tag 'mm-hotfixes-stable-2025-05-10-14-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc hotfixes from Andrew Morton: "22 hotfixes. 13 are cc:stable and the remainder address post-6.14 issues or aren't considered necessary for -stable kernels. About half are for MM. Five OCFS2 fixes and a few MAINTAINERS updates" * tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits) mm: fix folio_pte_batch() on XEN PV nilfs2: fix deadlock warnings caused by lock dependency in init_nilfs() mm/hugetlb: copy the CMA flag when demoting mm, swap: fix false warning for large allocation with !THP_SWAP selftests/mm: fix a build failure on powerpc selftests/mm: fix build break when compiling pkey_util.c mm: vmalloc: support more granular vrealloc() sizing tools/testing/selftests: fix guard region test tmpfs assumption ocfs2: stop quota recovery before disabling quotas ocfs2: implement handshaking with ocfs2 recovery thread ocfs2: switch osb->disable_recovery to enum mailmap: map Uwe's BayLibre addresses to a single one MAINTAINERS: add mm THP section mm/userfaultfd: fix uninitialized output field for -EAGAIN race selftests/mm: compaction_test: support platform with huge mount of memory MAINTAINERS: add core mm section ocfs2: fix panic in failed foilio allocation mm/huge_memory: fix dereferencing invalid pmd migration entry MAINTAINERS: add reverse mapping section x86: disable image size check for test builds ...
generated by cgit (git 2.34.1) at 2025-09-09 19:45:40 +0000