| Age | Commit message (Collapse) | Author |
|---|
|
Prarit reported that depending on the affinity setting the
' irq $N: Affinity broken due to vector space exhaustion.'
message is showing up in dmesg, but the vector space on the CPUs in the
affinity mask is definitely not exhausted.
Shung-Hsi provided traces and analysis which pinpoints the problem:
The ordering of trying to assign an interrupt vector in
assign_irq_vector_any_locked() is simply wrong if the interrupt data has a
valid node assigned. It does:
1) Try the intersection of affinity mask and node mask
2) Try the node mask
3) Try the full affinity mask
4) Try the full online mask
Obviously #2 and #3 are in the wrong order as the requested affinity
mask has to take precedence.
In the observed cases #1 failed because the affinity mask did not contain
CPUs from node 0. That made it allocate a vector from node 0, thereby
breaking affinity and emitting the misleading message.
Revert the order of #2 and #3 so the full affinity mask without the node
intersection is tried before actually affinity is broken.
If no node is assigned then only the full affinity mask and if that fails
the full online mask is tried.
Fixes: d6ffc6ac83b1 ("x86/vector: Respect affinity mask in irq descriptor")
Reported-by: Prarit Bhargava <prarit@redhat.com>
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87ft4djtyp.fsf@nanos.tec.linutronix.de
|
|
Tom Parkin says:
====================
add ppp_generic ioctl(s) to bridge channels
Following on from my previous RFC[1], this series adds two ioctl calls
to the ppp code to implement "channel bridging".
When two ppp channels are bridged, frames presented to ppp_input() on
one channel are passed to the other channel's ->start_xmit function for
transmission.
The primary use-case for this functionality is in an L2TP Access
Concentrator where PPP frames are typically presented in a PPPoE session
(e.g. from a home broadband user) and are forwarded to the ISP network in
a PPPoL2TP session.
The two new ioctls, PPPIOCBRIDGECHAN and PPPIOCUNBRIDGECHAN form a
symmetric pair.
Userspace code testing and illustrating use of the ioctl calls is
available in the go-l2tp[2] and l2tp-ktest[3] repositories.
[1]. Previous RFC series:
https://lore.kernel.org/netdev/20201106181647.16358-1-tparkin@katalix.com/
[2]. go-l2tp: a Go library for building L2TP applications on Linux
systems. Support for the PPPIOCBRIDGECHAN ioctl is on a branch:
https://github.com/katalix/go-l2tp/tree/tp_002_pppoe_2
[3]. l2tp-ktest: a test suite for the Linux Kernel L2TP subsystem.
Support for the PPPIOCBRIDGECHAN ioctl is on a branch:
https://github.com/katalix/l2tp-ktest/tree/tp_ac_pppoe_tests_2
Changelog:
v4:
* Fix NULL-pointer access in PPPIOCBRIDGECHAN in the case that the
ID of the channel to be bridged wasn't found.
* Add comment in ppp_unbridge_channels to better document the
unbridge process.
v3:
* Use rcu_dereference_protected for accessing struct channel
'bridge' field during updates with lock 'upl' held.
* Avoid race in ppp_unbridge_channels by ensuring that each channel
in the bridge points to it's peer before decrementing refcounts.
v2:
* Add missing __rcu annotation to struct channel 'bridge' field in
order to squash a sparse warning from a C=1 build
* Integrate review comments from gnault@redhat.com
* Have ppp_unbridge_channels return -EINVAL if the channel isn't
part of a bridge: this better aligns with the return code from
ppp_disconnect_channel.
* Improve docs update by including information on ioctl arguments
and error return codes.
====================
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add documentation of the newly-added PPPIOCBRIDGECHAN and
PPPIOCUNBRIDGECHAN ioctls.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This new ioctl pair allows two ppp channels to be bridged together:
frames arriving in one channel are transmitted in the other channel
and vice versa.
The practical use for this is primarily to support the L2TP Access
Concentrator use-case. The end-user session is presented as a ppp
channel (typically PPPoE, although it could be e.g. PPPoA, or even PPP
over a serial link) and is switched into a PPPoL2TP session for
transmission to the LNS. At the LNS the PPP session is terminated in
the ISP's network.
When a PPP channel is bridged to another it takes a reference on the
other's struct ppp_file. This reference is dropped when the channels
are unbridged, which can occur either explicitly on userspace calling
the PPPIOCUNBRIDGECHAN ioctl, or implicitly when either channel in the
bridge is unregistered.
In order to implement the channel bridge, struct channel is extended
with a new field, 'bridge', which points to the other struct channel
making up the bridge.
This pointer is RCU protected to avoid adding another lock to the data
path.
To guard against concurrent writes to the pointer, the existing struct
channel lock 'upl' coverage is extended rather than adding a new lock.
The 'upl' lock is used to protect the existing unit pointer. Since the
bridge effectively replaces the unit (they're mutually exclusive for a
channel) it makes coding easier to use the same lock to cover them
both.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We've been seeing failures with xfstests generic/091 and generic/263
when using READ_PLUS. I've made some progress on these issues, and the
tests fail later on but still don't pass. Let's disable READ_PLUS by
default until we can work out what is going on.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Since commit b4868b44c5628 ("NFSv4: Wait for stateid updates after
CLOSE/OPEN_DOWNGRADE"), every inter server copy operation suffers 5
seconds delay regardless of the size of the copy. The delay is from
nfs_set_open_stateid_locked when the check by nfs_stateid_is_sequential
fails because the seqid in both nfs4_state and nfs4_stateid are 0.
Fix __nfs42_ssc_open to delay setting of NFS_OPEN_STATE in nfs4_state,
until after the call to update_open_stateid, to indicate this is the 1st
open. This fix is part of a 2 patches, the other patch is the fix in the
source server to return the stateid for COPY_NOTIFY request with seqid 1
instead of 0.
Fixes: ce0887ac96d3 ("NFSD add nfs4 inter ssc to nfsd4_copy")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
By switching to an XFS-backed export, I am able to reproduce the
ibcomp worker crash on my client with xfstests generic/013.
For the failing LISTXATTRS operation, xdr_inline_pages() is called
with page_len=12 and buflen=128.
- When ->send_request() is called, rpcrdma_marshal_req() does not
set up a Reply chunk because buflen is smaller than the inline
threshold. Thus rpcrdma_convert_iovs() does not get invoked at
all and the transport's XDRBUF_SPARSE_PAGES logic is not invoked
on the receive buffer.
- During reply processing, rpcrdma_inline_fixup() tries to copy
received data into rq_rcv_buf->pages because page_len is positive.
But there are no receive pages because rpcrdma_marshal_req() never
allocated them.
The result is that the ibcomp worker faults and dies. Sometimes that
causes a visible crash, and sometimes it results in a transport hang
without other symptoms.
RPC/RDMA's XDRBUF_SPARSE_PAGES support is not entirely correct, and
should eventually be fixed or replaced. However, my preference is
that upper-layer operations should explicitly allocate their receive
buffers (using GFP_KERNEL) when possible, rather than relying on
XDRBUF_SPARSE_PAGES.
Reported-by: Olga kornievskaia <kolga@netapp.com>
Suggested-by: Olga kornievskaia <kolga@netapp.com>
Fixes: c10a75145feb ("NFSv4.2: add the extended attribute proc functions.")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Olga kornievskaia <kolga@netapp.com>
Reviewed-by: Frank van der Linden <fllinden@amazon.com>
Tested-by: Olga kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
We use rcu_assign_pointer to assign both the table and the entries,
but the entries are not marked as __rcu. This generates sparse
warnings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 0a4e9ce17ba77847e5a9f87eed3c0ba46e3f82eb.
The code was developed and tested on an MSC313E SoC, which seems to be
half-way between the AT91RM9200 and the AT91SAM9260 in that it supports
both the 2-descriptors mode and a Tx ring.
It turns out that after the code was merged I could notice that the
controller would sometimes lock up, and only when dealing with sustained
bidirectional transfers, in which case it would report a Tx overrun
condition right after having reported being ready, and will stop sending
even after the status is cleared (a down/up cycle fixes it though).
After adding lots of traces I couldn't spot a sequence pattern allowing
to predict that this situation would happen. The chip comes with no
documentation and other bits are often reported with no conclusive
pattern either.
It is possible that my change is wrong just like it is possible that
the controller on the chip is bogus or at least unpredictable based on
existing docs from other chips. I do not have an RM9200 at hand to test
at the moment and a few tests run on a more recent 9G20 indicate that
this code path cannot be used there to test the code on a 3rd platform.
Since the MSC313E works fine in the single-descriptor mode, and that
people using the old RM9200 very likely favor stability over performance,
better revert this patch until we can test it on the original platform
this part of the driver was written for. Note that the reverted patch
was actually tested on MSC313E.
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Daniel Palmer <daniel@0x0f.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/netdev/20201206092041.GA10646@1wt.eu/
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Packets sent by rmnet to the real device have variable MAP header
lengths based on the data format configured. This patch adds checks
to ensure that the real device MTU is sufficient to transmit the MAP
packet comprising of the MAP header and the IP packet. This check
is enforced when rmnet devices are created and updated and during
MTU updates of both the rmnet and real device.
Additionally, rmnet devices now have a default MTU configured which
accounts for the real device MTU and the headroom based on the data
format.
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Tested-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The test program udpgso_bench_rx always invokes the poll()
syscall with a timeout of 10ms. If a larger timeout is specified
via the command line, udpgso_bench_rx is supposed to do multiple
poll() calls till the timeout is expired or an event is received.
Currently the poll() loop errors out after the first invocation with
no events, and may causes self-tests failure alike:
failed
GRO with custom segment size ./udpgso_bench_rx: poll: 0x0 expected 0x1
This change addresses the issue allowing the poll() loop to consume
all the configured timeout.
Fixes: ada641ff6ed3 ("selftests: fixes for UDP GRO")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
(dis)connected
When the upper layer instruct us to connect (or disconnect), but we have
already connected (or disconnected), consider this operation successful
rather than failed.
This can help the upper layer to correct its record about whether we are
connected or not here in layer 2.
The upper layer may not have the correct information about whether we are
connected or not. This can happen if this driver has already been running
for some time when the "x25" module gets loaded.
Another X.25 driver (hdlc_x25) is already doing this, so we make this
driver do this, too.
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new device ID for the next step of the silicon and
reflect the I226_K part.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The verifier trace changed following a bugfix. After checking the 64-bit
sign, only the upper bit mask is known, not bit 31. Update the test
accordingly.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The test fails because of a recent fix to the verifier, even though this
program is valid. In details what happens is:
7: (61) r1 = *(u32 *)(r0 +0)
Load a 32-bit value, with signed bounds [S32_MIN, S32_MAX]. The bounds
of the 64-bit value are [0, U32_MAX]...
8: (65) if r1 s> 0xffffffff goto pc+1
... therefore this is always true (the operand is sign-extended).
10: (b4) w2 = 11
11: (6d) if r2 s> r1 goto pc+1
When true, the 64-bit bounds become [0, 10]. The 32-bit bounds are still
[S32_MIN, 10].
13: (64) w1 <<= 2
Because this is a 32-bit operation, the verifier propagates the new
32-bit bounds to the 64-bit ones, and the knowledge gained from insn 11
is lost.
14: (0f) r0 += r1
15: (7a) *(u64 *)(r0 +0) = 4
Then the verifier considers r0 unbounded here, rejecting the test. To
make the test work, change insn 8 to check the sign of the 32-bit value.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After a 32-bit load followed by a branch, the verifier would reduce the
maximum bound of the register to 0x7fffffff, allowing a user to bypass
bound checks. Ensure such a program is rejected.
In the second test, the 64-bit compare should not sufficient to
determine whether the signed 32-bit lower bound is 0, so the verifier
should reject the second branch.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A prior patch increased the size of struct tcp_zerocopy_receive
but did not update do_tcp_getsockopt() handling to properly account
for this.
This patch simply reintroduces content erroneously cut from the
referenced prior patch that handles the new struct size.
Fixes: 18fb76ed5386 ("net-zerocopy: Copy straggler unaligned data for TCP Rx. zerocopy.")
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 64-bit signed bounds should not affect 32-bit signed bounds unless the
verifier knows that upper 32-bits are either all 1s or all 0s. For example the
register with smin_value==1 doesn't mean that s32_min_value is also equal to 1,
since smax_value could be larger than 32-bit subregister can hold.
The verifier refines the smax/s32_max return value from certain helpers in
do_refine_retval_range(). Teach the verifier to recognize that smin/s32_min
value is also bounded. When both smin and smax bounds fit into 32-bit
subregister the verifier can propagate those bounds.
Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the return expression.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2020-12-10
here's a pull request of 7 patches for net-next/master.
The first patch is by Oliver Hartkopp for the CAN ISOTP, which adds support for
functional addressing.
A patch by Antonio Quartulli removes an unneeded unlikely() annotation from the
rx-offload helper.
The next three patches target the m_can driver. Sean Nyekjaers's patch removes
a double clearing of clock stop request bit, Patrik Flykt's patch moves the
runtime PM enable/disable to m_can_platform and Jarkko Nikula's patch adds a
PCI glue code driver.
Fabio Estevam's patch converts the flexcan driver to DT only.
And Manivannan Sadhasivam's patchd for the mcp251xfd driver adds internal
loopback mode support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The definition of IS_ERR() already applies the unlikely() notation
when checking the error status of the passed pointer. For this
reason there is no need to have the same notation outside of
IS_ERR() itself.
Clean up code by removing redundant notation.
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages
using cma") added support for allocating gigantic hugepages using CMA,
by specifying the hugetlb_cma= kernel parameter, which will disable any
boot-time allocation of gigantic hugepages.
This patch enables that option also for s390.
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The random longs to be pulled by arch_get_random_long() are
prepared in an 4K buffer which is filled from the NIST 800-90
compliant s390 drbg. By default the random long buffer is refilled
256 times before the drbg itself needs a reseed. The reseed of the
drbg is done with 32 bytes fetched from the high quality (but slow)
trng which is assumed to deliver 100% entropy. So the 32 * 8 = 256
bits of entropy are spread over 256 * 4KB = 1MB serving 131072
arch_get_random_long() invocations before reseeded.
How often the 4K random long buffer is refilled with the drbg
before the drbg is reseeded can be adjusted. There is a module
parameter 's390_arch_rnd_long_drbg_reseed' accessible via
/sys/module/arch_random/parameters/rndlong_drbg_reseed
or as kernel command line parameter
arch_random.rndlong_drbg_reseed=<value>
This parameter tells how often the drbg fills the 4K buffer before
it is re-seeded by fresh entropy from the trng.
A value of 16 results in reseeding the drbg at every 16 * 4 KB = 64
KB with 32 bytes of fresh entropy pulled from the trng. So a value
of 16 would result in 256 bits entropy per 64 KB.
A value of 256 results in 1MB of drbg output before a reseed of the
drbg is done. So this would spread the 256 bits of entropy among 1MB.
Setting this parameter to 0 forces the reseed to take place every
time the 4K buffer is depleted, so the entropy rises to 256 bits
entropy per 4K or 0.5 bit entropy per arch_get_random_long(). With
setting this parameter to negative values all this effort is
disabled, arch_get_random long() returns false and thus indicating
that the arch_get_random_long() feature is disabled at all.
arch_get_random_long() is used by random.c among others to provide
an initial hash value to be mixed with the entropy pool on every
random data pull. For about 64 bytes read from /dev/urandom there
is one call to arch_get_random_long(). So these additional random
long values count for performance of /dev/urandom with measurable
but low penalty.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Pull rdma fixes from Jason Gunthorpe:
"Two user triggerable crashers and a some EFA related regressions:
- Syzkaller found a bug in CM
- Restore access to the GID table and fix modify_qp for EFA
- Crasher in qedr"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait
RDMA/core: Fix empty gid table for non IB/RoCE devices
RDMA/efa: Use the correct current and new states in modify QP
RDMA/qedr: iWARP invalid(zero) doorbell address fix
|
|
A problem exists in enabling silent stream when connection type is
DisplayPort. Silent stream programming is completed when a new DP
receiver is connected, but infoframe transmission does not actually
start until PCM is opened for the first time. This can result in audible
gap of multiple seconds. This only affects the first PCM open.
Fix the issue by properly assigning a converter to the silent stream,
and modifying the required stream ID programming sequence.
This change only affects Intel display audio codecs.
BugLink: https://github.com/thesofproject/linux/issues/2468
Fixes: 951894cf30f4 ("ALSA: hda/hdmi: Add Intel silent stream support")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201210174445.3134104-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Change the Input Source enumerated control's strings to make it play
nice with pulseaudio.
Fixes: 7cb9d94c05de9 ("ALSA: hda/ca0132: add alt_select_in/out for R3Di + SBZ")
Cc: <stable@kernel.org>
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201208195223.424753-2-conmanx360@gmail.com
Link: https://lore.kernel.org/r/20201210173550.2968-2-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Windows driver sets the pincfg for the AE-5's rear-headphone to
report as a microphone. This causes issues with Pulseaudio mistakenly
believing there is no headphone plugged in. In Linux, we should instead
set it to be a headphone.
Fixes: a6b0961b39896 ("ALSA: hda/ca0132 - fix AE-5 pincfg")
Cc: <stable@kernel.org>
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201208195223.424753-1-conmanx360@gmail.com
Link: https://lore.kernel.org/r/20201210173550.2968-1-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Steinberg UR22 (with USB ID 0499:1509) requires the implicit feedback
for the proper playback, otherwise it causes occasional cracks.
This patch adds the corresponding the quirk table entry with the
recently added generic implicit fb support.
Reported-and-tested-by: Kilian <meschi@posteo.de>
Link: https://lore.kernel.org/r/20201209161835.13625-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It seems that the HD-audio clear and reconfig sysfs don't work any
longer after the recent driver core change. There are multiple issues
around that: the linked list corruption and the dead device handling.
The former issue is fixed by another patch for the driver core itself,
while the latter patch needs to be addressed in HD-audio side.
This patch corresponds to the latter, it recovers those broken
functions by replacing the device detach and attach actions with the
standard core API functions, which are almost equivalent with unbind
and bind actions.
Fixes: 654888327e9f ("driver core: Avoid binding drivers to dead devices")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209207
Link: https://lore.kernel.org/r/20201209150119.7705-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201209135550.2004-1-zhengyongjun3@huawei.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A couple of fixes:
- videobuf2: fix a DMABUF bug, preventing it to properly handle cache
sync/flush
- vidtv: an usage after free and a few sparse/smatch warning fixes
- pulse8-cec: a duplicate free and a bug related to new firmware
usage
- mtk-cir: fix a regression on a clock setting"
* tag 'media/v5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: vidtv: fix some warnings
media: vidtv: fix kernel-doc markups
media: [next] media: vidtv: fix a read from an object after it has been freed
media: vb2: set cache sync hints when init buffers
media: pulse8-cec: add support for FW v10 and up
media: pulse8-cec: fix duplicate free at disconnect or probe error
media: mtk-cir: fix calculation of chk period
|
|
Added retry mechanism to ensure VMM enable bit is set during the
block transfer of data between host and WILC FW.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201208103739.28597-1-ajay.kathat@microchip.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
iwlwifi patches intended for v5.11
* A few fixes and improvements in the FW debugging framework;
* A fix in the HE capabilities settings;
* Small fix in the logs for SAR;
* Move queue code to a common place;
* Support for 6GHz;
* Improve validation of firmware notifications;
* Debugging improvements and fixes;
* Replace terminology with inclusive words determined by the guidelines;
* Convert copyright notices to SPDX tags;
* Added more validations for firmware notifications;
* A couple of debugging/recovery fixes;
* Added some more validations for firmware notifications;
* Support for a new type of HW;
* A couple of channel switch fixes;
* Support new FW reset handshake;
* Add a couple of RX handlers that were accidentally left out;
* Some other clean-ups and small fixes;
# gpg: Signature made Thu 10 Dec 2020 12:19:59 AM EET using RSA key ID 1A3CC5FA
# gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>"
# gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"
|
|
The MBA software controller (mba_sc) is a feedback loop which
periodically reads MBM counters and tries to restrict the bandwidth
below a user-specified value. It tags along the MBM counter overflow
handler to do the updates with 1s interval in mbm_update() and
update_mba_bw().
The purpose of mbm_update() is to periodically read the MBM counters to
make sure that the hardware counter doesn't wrap around more than once
between user samplings. mbm_update() calls __mon_event_count() for local
bandwidth updating when mba_sc is not enabled, but calls mbm_bw_count()
instead when mba_sc is enabled. __mon_event_count() will not be called
for local bandwidth updating in MBM counter overflow handler, but it is
still called when reading MBM local bandwidth counter file
'mbm_local_bytes', the call path is as below:
rdtgroup_mondata_show()
mon_event_read()
mon_event_count()
__mon_event_count()
In __mon_event_count(), m->chunks is updated by delta chunks which is
calculated from previous MSR value (m->prev_msr) and current MSR value.
When mba_sc is enabled, m->chunks is also updated in mbm_update() by
mistake by the delta chunks which is calculated from m->prev_bw_msr
instead of m->prev_msr. But m->chunks is not used in update_mba_bw() in
the mba_sc feedback loop.
When reading MBM local bandwidth counter file, m->chunks was changed
unexpectedly by mbm_bw_count(). As a result, the incorrect local
bandwidth counter which calculated from incorrect m->chunks is shown to
the user.
Fix this by removing incorrect m->chunks updating in mbm_bw_count() in
MBM counter overflow handler, and always calling __mon_event_count() in
mbm_update() to make sure that the hardware local bandwidth counter
doesn't wrap around.
Test steps:
# Run workload with aggressive memory bandwidth (e.g., 10 GB/s)
git clone https://github.com/intel/intel-cmt-cat && cd intel-cmt-cat
&& make
./tools/membw/membw -c 0 -b 10000 --read
# Enable MBA software controller
mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl
# Create control group c1
mkdir /sys/fs/resctrl/c1
# Set MB throttle to 6 GB/s
echo "MB:0=6000;1=6000" > /sys/fs/resctrl/c1/schemata
# Write PID of the workload to tasks file
echo `pidof membw` > /sys/fs/resctrl/c1/tasks
# Read local bytes counters twice with 1s interval, the calculated
# local bandwidth is not as expected (approaching to 6 GB/s):
local_1=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes`
sleep 1
local_2=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes`
echo "local b/w (bytes/s):" `expr $local_2 - $local_1`
Before fix:
local b/w (bytes/s): 11076796416
After fix:
local b/w (bytes/s): 5465014272
Fixes: ba0f26d8529c (x86/intel_rdt/mba_sc: Prepare for feedback loop)
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/1607063279-19437-1-git-send-email-xiaochen.shen@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
kvm/arm64 fixes for 5.10, take #5
- Don't leak page tables on PTE update
- Correctly invalidate TLBs on table to block transition
- Only update permissions if the fault level matches the
expected mapping size
|
|
We can't compile test_core_reloc_module.c selftest with clang 11, compile
fails with:
CLNG-LLC [test_maps] test_core_reloc_module.o
progs/test_core_reloc_module.c:57:21: error: use of unknown builtin \
'__builtin_preserve_type_info' [-Wimplicit-function-declaration]
out->read_ctx_sz = bpf_core_type_size(struct bpf_testmod_test_read_ctx);
Skipping these tests if __builtin_preserve_type_info() is not supported
by compiler.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201209142912.99145-1-jolsa@kernel.org
|
|
This patch adds *xdpxceiver* to selftests/bpf/.gitignore
Reported-by: Yonghong Song <yhs@fb.com>
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Weqaar Janjua <weqaar.a.janjua@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201210115435.3995-1-weqaar.a.janjua@intel.com
|
|
The files don't exist anymore so this breaks generic kselftest builds
when using "make install" or "make gen_tar".
Fixes: 247f0ec361b7 ("selftests/bpf: Drop python client/server in favor of threads")
Signed-off-by: Veronika Kabatova <vkabatov@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20201210120134.2148482-1-vkabatov@redhat.com
|
|
There is no use for OF headers in the driver, but mod_devicetable.h
must be included. Update driver accordingly.
Cc: Peng Hao <peng.hao2@zte.com.cn>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201209203642.27648-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is nothing special in the driver that requires to have
a special ACPI driver for it. Combine both into simple
platform driver.
Cc: Peng Hao <peng.hao2@zte.com.cn>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201209203642.27648-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Switch to use new platform_get_mem_or_io() instead of home grown analogue.
Note, the code has been moved upper in the function to allow farther cleanups,
such as resource sanity check.
Cc: linux-usb@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201209203642.27648-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Switch to use new platform_get_mem_or_io() instead of home grown analogue.
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: kvm@vger.kernel.org
Acked-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201209203642.27648-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are at least few existing users of the proposed API which
retrieves either MEM or IO resource from platform device.
Make it common to utilize in the existing and new users.
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: Peng Hao <peng.hao2@zte.com.cn>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201209203642.27648-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It has been observed that once per 300-1300 port openings the first
transmitted byte is being corrupted on AM3352 ("v" written to FIFO appeared
as "e" on the wire). It only happened if single byte has been transmitted
right after port open, which means, DMA is not used for this transfer and
the corruption never happened afterwards.
Therefore I've carefully re-read the MDR1 errata (link below), which says
"when accessing the MDR1 registers that causes a dummy under-run condition
that will freeze the UART in IrDA transmission. In UART mode, this may
corrupt the transferred data". Strictly speaking,
omap_8250_mdr1_errataset() performs a read access and if the value is the
same as should be written, exits without errata-recommended FIFO reset.
A brief check of the serial_omap_mdr1_errataset() from the competing
omap-serial driver showed it has no read access of MDR1. After removing the
read access from omap_8250_mdr1_errataset() the data corruption never
happened any more.
Link: https://www.ti.com/lit/er/sprz360i/sprz360i.pdf
Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20201210055257.1053028-1-alexander.sverdlin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the driver only probes via devicetree, we can move the
content of imx_uart_probe_dt() directly into imx_uart_probe() to
make the code simpler.
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201209214712.15247-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
platform_get_resource_byname() may fail and in this case a NULL
dereference will occur.
Fix it to use devm_platform_ioremap_resource_byname() instead of calling
platform_get_resource_byname() and devm_ioremap().
This is detected by Coccinelle semantic patch.
@@
expression pdev, res, n, t, e, e1, e2;
@@
res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t,
n);
+ if (!res)
+ return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);
Fixes: ad7fcbc308b0 ("slimbus: qcom: Add Qualcomm Slimbus controller driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/r/1607392473-20610-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver core ignores the return value of the remove callback, so
don't give siox drivers the chance to provide a value.
All siox drivers only allocate devm-managed resources in
.probe, so there is no .remove callback to fix.
Tested-by: Thorsten Scherer <t.scherer@eckelmann.de>
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20201125093106.240643-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The eventual goal is to get rid of the callbacks in struct
device_driver.
Tested-by: Thorsten Scherer <t.scherer@eckelmann.de>
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20201125093106.240643-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
