summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-02-13ext4: add cond_resched() to ext4_protect_reserved_inodeShijie Luo
When journal size is set too big by "mkfs.ext4 -J size=", or when we mount a crafted image to make journal inode->i_size too big, the loop, "while (i < num)", holds cpu too long. This could cause soft lockup. [ 529.357541] Call trace: [ 529.357551] dump_backtrace+0x0/0x198 [ 529.357555] show_stack+0x24/0x30 [ 529.357562] dump_stack+0xa4/0xcc [ 529.357568] watchdog_timer_fn+0x300/0x3e8 [ 529.357574] __hrtimer_run_queues+0x114/0x358 [ 529.357576] hrtimer_interrupt+0x104/0x2d8 [ 529.357580] arch_timer_handler_virt+0x38/0x58 [ 529.357584] handle_percpu_devid_irq+0x90/0x248 [ 529.357588] generic_handle_irq+0x34/0x50 [ 529.357590] __handle_domain_irq+0x68/0xc0 [ 529.357593] gic_handle_irq+0x6c/0x150 [ 529.357595] el1_irq+0xb8/0x140 [ 529.357599] __ll_sc_atomic_add_return_acquire+0x14/0x20 [ 529.357668] ext4_map_blocks+0x64/0x5c0 [ext4] [ 529.357693] ext4_setup_system_zone+0x330/0x458 [ext4] [ 529.357717] ext4_fill_super+0x2170/0x2ba8 [ext4] [ 529.357722] mount_bdev+0x1a8/0x1e8 [ 529.357746] ext4_mount+0x44/0x58 [ext4] [ 529.357748] mount_fs+0x50/0x170 [ 529.357752] vfs_kern_mount.part.9+0x54/0x188 [ 529.357755] do_mount+0x5ac/0xd78 [ 529.357758] ksys_mount+0x9c/0x118 [ 529.357760] __arm64_sys_mount+0x28/0x38 [ 529.357764] el0_svc_common+0x78/0x130 [ 529.357766] el0_svc_handler+0x38/0x78 [ 529.357769] el0_svc+0x8/0xc [ 541.356516] watchdog: BUG: soft lockup - CPU#0 stuck for 23s! [mount:18674] Link: https://lore.kernel.org/r/20200211011752.29242-1-luoshijie1@huawei.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Shijie Luo <luoshijie1@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2020-02-13ext4: fix checksum errors with indexed dirsJan Kara
DIR_INDEX has been introduced as a compat ext4 feature. That means that even kernels / tools that don't understand the feature may modify the filesystem. This works because for kernels not understanding indexed dir format, internal htree nodes appear just as empty directory entries. Index dir aware kernels then check the htree structure is still consistent before using the data. This all worked reasonably well until metadata checksums were introduced. The problem is that these effectively made DIR_INDEX only ro-compatible because internal htree nodes store checksums in a different place than normal directory blocks. Thus any modification ignorant to DIR_INDEX (or just clearing EXT4_INDEX_FL from the inode) will effectively cause checksum mismatch and trigger kernel errors. So we have to be more careful when dealing with indexed directories on filesystems with checksumming enabled. 1) We just disallow loading any directory inodes with EXT4_INDEX_FL when DIR_INDEX is not enabled. This is harsh but it should be very rare (it means someone disabled DIR_INDEX on existing filesystem and didn't run e2fsck), e2fsck can fix the problem, and we don't want to answer the difficult question: "Should we rather corrupt the directory more or should we ignore that DIR_INDEX feature is not set?" 2) When we find out htree structure is corrupted (but the filesystem and the directory should in support htrees), we continue just ignoring htree information for reading but we refuse to add new entries to the directory to avoid corrupting it more. Link: https://lore.kernel.org/r/20200210144316.22081-1-jack@suse.cz Fixes: dbe89444042a ("ext4: Calculate and verify checksums for htree nodes") Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2020-02-13ext4: fix support for inode sizes > 1024 bytesTheodore Ts'o
A recent commit, 9803387c55f7 ("ext4: validate the debug_want_extra_isize mount option at parse time"), moved mount-time checks around. One of those changes moved the inode size check before the blocksize variable was set to the blocksize of the file system. After 9803387c55f7 was set to the minimum allowable blocksize, which in practice on most systems would be 1024 bytes. This cuased file systems with inode sizes larger than 1024 bytes to be rejected with a message: EXT4-fs (sdXX): unsupported inode size: 4096 Fixes: 9803387c55f7 ("ext4: validate the debug_want_extra_isize mount option at parse time") Link: https://lore.kernel.org/r/20200206225252.GA3673@mit.edu Reported-by: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2020-02-13crypto/testmgr: enable selftests for paes-s390 ciphersHarald Freudenberger
This patch enables the selftests for the s390 specific protected key AES (PAES) cipher implementations: * cbc-paes-s390 * ctr-paes-s390 * ecb-paes-s390 * xts-paes-s390 PAES is an AES cipher but with encrypted ('protected') key material. However, the paes ciphers are able to derive an protected key from clear key material with the help of the pkey kernel module. So this patch now enables the generic AES tests for the paes ciphers. Under the hood the setkey() functions rearrange the clear key values as clear key token and so the pkey kernel module is able to provide protected key blobs from the given clear key values. The derived protected key blobs are then used within the paes cipers and should produce the very same results as the generic AES implementation with the clear key values. The s390-paes cipher testlist entries are surrounded by #if IS_ENABLED(CONFIG_CRYPTO_PAES_S390) because they don't make any sense on non s390 platforms or without the PAES cipher implementation. Link: http://lkml.kernel.org/r/20200213083946.zicarnnt3wizl5ty@gondor.apana.org.au Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-13ext4: simplify checking quota limits in ext4_statfs()Jan Kara
Coverity reports that conditions checking quota limits in ext4_statfs() contain dead code. Indeed it is right and current conditions can be simplified. Link: https://lore.kernel.org/r/20200130111148.10766-1-jack@suse.cz Reported-by: Coverity <scan-admin@coverity.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2020-02-13ext4: don't assume that mmp_nodename/bdevname have NULAndreas Dilger
Don't assume that the mmp_nodename and mmp_bdevname strings are NUL terminated, since they are filled in by snprintf(), which is not guaranteed to do so. Link: https://lore.kernel.org/r/1580076215-1048-1-git-send-email-adilger@dilger.ca Signed-off-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2020-02-13RDMA/core: Fix protection fault in get_pkey_idx_qp_listLeon Romanovsky
We don't need to set pkey as valid in case that user set only one of pkey index or port number, otherwise it will be resulted in NULL pointer dereference while accessing to uninitialized pkey list. The following crash from Syzkaller revealed it. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 14753 Comm: syz-executor.2 Not tainted 5.5.0-rc5 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:get_pkey_idx_qp_list+0x161/0x2d0 Code: 01 00 00 49 8b 5e 20 4c 39 e3 0f 84 b9 00 00 00 e8 e4 42 6e fe 48 8d 7b 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 01 0f 8e d0 00 00 00 48 8d 7d 04 48 b8 RSP: 0018:ffffc9000bc6f950 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff82c8bdec RDX: 0000000000000002 RSI: ffffc900030a8000 RDI: 0000000000000010 RBP: ffff888112c8ce80 R08: 0000000000000004 R09: fffff5200178df1f R10: 0000000000000001 R11: fffff5200178df1f R12: ffff888115dc4430 R13: ffff888115da8498 R14: ffff888115dc4410 R15: ffff888115da8000 FS: 00007f20777de700(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2f721000 CR3: 00000001173ca002 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: port_pkey_list_insert+0xd7/0x7c0 ib_security_modify_qp+0x6fa/0xfc0 _ib_modify_qp+0x8c4/0xbf0 modify_qp+0x10da/0x16d0 ib_uverbs_modify_qp+0x9a/0x100 ib_uverbs_write+0xaa5/0xdf0 __vfs_write+0x7c/0x100 vfs_write+0x168/0x4a0 ksys_write+0xc8/0x200 do_syscall_64+0x9c/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: d291f1a65232 ("IB/core: Enforce PKey security on QPs") Link: https://lore.kernel.org/r/20200212080651.GB679970@unreal Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Message-Id: <20200212080651.GB679970@unreal>
2020-02-13Merge tag 'fixes-for-v5.6-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: USB: fixes for v5.6-rc1 DWC3 learned that we can't always depend on Event Status bits. A problem was solved which would only surface with scatter list on IN endpoints. DWC2 got a fix for feature requests (both set and clear) and GetStatus request. The serial gadget got a fix for a TX stall bug. Composite framework now works better for SSP devices. * tag 'fixes-for-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: dwc3: debug: fix string position formatting mixup with ret and len usb: gadget: serial: fix Tx stall after buffer overflow usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags usb: dwc2: Fix SET/CLEAR_FEATURE and GET_STATUS flows usb: dwc2: Fix in ISOC request length checking usb: gadget: composite: Support more than 500mA MaxPower usb: gadget: composite: Fix bMaxPower for SuperSpeedPlus usb: gadget: u_audio: Fix high-speed max packet size usb: dwc3: gadget: Check for IOC/LST bit in TRB->ctrl fields
2020-02-13bcache: remove macro nr_to_fifo_front()Coly Li
Macro nr_to_fifo_front() is only used once in btree_flush_write(), it is unncessary indeed. This patch removes this macro and does calculation directly in place. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-13bcache: Revert "bcache: shrink btree node cache after bch_btree_check()"Coly Li
This reverts commit 1df3877ff6a4810054237c3259d900ded4468969. In my testing, sometimes even all the cached btree nodes are freed, creating gc and allocator kernel threads may still fail. Finally it turns out that kthread_run() may fail if there is pending signal for current task. And the pending signal is sent from OOM killer which is triggered by memory consuption in bch_btree_check(). Therefore explicitly shrinking bcache btree node here does not help, and after the shrinker callback is improved, as well as pending signals are ignored before creating kernel threads, now such operation is unncessary anymore. This patch reverts the commit 1df3877ff6a4 ("bcache: shrink btree node cache after bch_btree_check()") because we have better improvement now. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-13bcache: ignore pending signals when creating gc and allocator threadColy Li
When run a cache set, all the bcache btree node of this cache set will be checked by bch_btree_check(). If the bcache btree is very large, iterating all the btree nodes will occupy too much system memory and the bcache registering process might be selected and killed by system OOM killer. kthread_run() will fail if current process has pending signal, therefore the kthread creating in run_cache_set() for gc and allocator kernel threads are very probably failed for a very large bcache btree. Indeed such OOM is safe and the registering process will exit after the registration done. Therefore this patch flushes pending signals during the cache set start up, specificly in bch_cache_allocator_start() and bch_gc_thread_start(), to make sure run_cache_set() won't fail for large cahced data set. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-13ALSA: pcm: Fix double hw_free callsTakashi Iwai
The commit 66f2d19f8116 ("ALSA: pcm: Fix memory leak at closing a stream without hw_free") tried to fix the regression wrt the missing hw_free call at closing without SNDRV_PCM_IOCTL_HW_FREE ioctl. However, the code change dropped mistakenly the state check, resulting in calling hw_free twice when SNDRV_PCM_IOCTL_HW_FRE got called beforehand. For most drivers, this is almost harmless, but the drivers like SOF show another regression now. This patch adds the state condition check before calling do_hw_free() at releasing the stream for avoiding the double hw_free calls. Fixes: 66f2d19f8116 ("ALSA: pcm: Fix memory leak at closing a stream without hw_free") Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/s5hd0ajyprg.wl-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-02-13RDMA/rxe: Fix soft lockup problem due to using tasklets in softirqZhu Yanjun
When run stress tests with RXE, the following Call Traces often occur watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [swapper/2:0] ... Call Trace: <IRQ> create_object+0x3f/0x3b0 kmem_cache_alloc_node_trace+0x129/0x2d0 __kmalloc_reserve.isra.52+0x2e/0x80 __alloc_skb+0x83/0x270 rxe_init_packet+0x99/0x150 [rdma_rxe] rxe_requester+0x34e/0x11a0 [rdma_rxe] rxe_do_task+0x85/0xf0 [rdma_rxe] tasklet_action_common.isra.21+0xeb/0x100 __do_softirq+0xd0/0x298 irq_exit+0xc5/0xd0 smp_apic_timer_interrupt+0x68/0x120 apic_timer_interrupt+0xf/0x20 </IRQ> ... The root cause is that tasklet is actually a softirq. In a tasklet handler, another softirq handler is triggered. Usually these softirq handlers run on the same cpu core. So this will cause "soft lockup Bug". Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200212072635.682689-8-leon@kernel.org Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-13RDMA/mlx5: Prevent overflow in mmap offset calculationsLeon Romanovsky
The cmd and index variables declared as u16 and the result is supposed to be stored in u64. The C arithmetic rules doesn't promote "(index >> 8) << 16" to be u64 and leaves the end result to be u16. Fixes: 7be76bef320b ("IB/mlx5: Introduce VAR object and its alloc/destroy methods") Link: https://lore.kernel.org/r/20200212072635.682689-10-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-13IB/umad: Fix kernel crash while unloading ib_umadYonatan Cohen
When disassociating a device from umad we must ensure that the sysfs access is prevented before blocking the fops, otherwise assumptions in syfs don't hold: CPU0 CPU1 ib_umad_kill_port() ibdev_show() port->ib_dev = NULL dev_name(port->ib_dev) The prior patch made an error in moving the device_destroy(), it should have been split into device_del() (above) and put_device() (below). At this point we already have the split, so move the device_del() back to its original place. kernel stack PF: error_code(0x0000) - not-present page Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI RIP: 0010:ibdev_show+0x18/0x50 [ib_umad] RSP: 0018:ffffc9000097fe40 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffffa0441120 RCX: ffff8881df514000 RDX: ffff8881df514000 RSI: ffffffffa0441120 RDI: ffff8881df1e8870 RBP: ffffffff81caf000 R08: ffff8881df1e8870 R09: 0000000000000000 R10: 0000000000001000 R11: 0000000000000003 R12: ffff88822f550b40 R13: 0000000000000001 R14: ffffc9000097ff08 R15: ffff8882238bad58 FS: 00007f1437ff3740(0000) GS:ffff888236940000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000004e8 CR3: 00000001e0dfc001 CR4: 00000000001606e0 Call Trace: dev_attr_show+0x15/0x50 sysfs_kf_seq_show+0xb8/0x1a0 seq_read+0x12d/0x350 vfs_read+0x89/0x140 ksys_read+0x55/0xd0 do_syscall_64+0x55/0x1b0 entry_SYSCALL_64_after_hwframe+0x44/0xa9: Fixes: cf7ad3030271 ("IB/umad: Avoid destroying device while it is accessed") Link: https://lore.kernel.org/r/20200212072635.682689-9-leon@kernel.org Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-13RDMA/mlx5: Fix async events cleanup flowsYishai Hadas
As in the prior patch, the devx code is not fully cleaning up its event_lists before finishing driver_destroy allowing a later read to trigger user after free conditions. Re-arrange things so that the event_list is always empty after destroy and ensure it remains empty until the file is closed. Fixes: f7c8416ccea5 ("RDMA/core: Simplify destruction of FD uobjects") Link: https://lore.kernel.org/r/20200212072635.682689-7-leon@kernel.org Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-13RDMA/core: Add missing list deletion on freeing event queueMichael Guralnik
When the uobject file scheme was revised to allow device disassociation from the file it became possible for read() to still happen the driver destroys the uobject. The old clode code was not tolerant to concurrent read, and when it was moved to the driver destroy it creates a bug. Ensure the event_list is empty after driver destroy by adding the missing list_del(). Otherwise read() can trigger a use after free and double kfree. Fixes: f7c8416ccea5 ("RDMA/core: Simplify destruction of FD uobjects") Link: https://lore.kernel.org/r/20200212072635.682689-6-leon@kernel.org Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-13ASoC: codec2codec: avoid invalid/double-free of pcm runtimeSamuel Holland
The PCM runtime was freed during PMU in the case that the event hook encountered an error. However, it is also unconditionally freed during PMD. Avoid a double-free by dropping the call to kfree in the PMU hook. Fixes: a72706ed8208 ("ASoC: codec2codec: remove ephemeral variables") Cc: stable@vger.kernel.org Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20200213061147.29386-2-samuel@sholland.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-13thunderbolt: Prevent crash if non-active NVMem file is readMika Westerberg
The driver does not populate .reg_read callback for the non-active NVMem because the file is supposed to be write-only. However, it turns out NVMem subsystem does not yet support this and expects that the .reg_read callback is provided. If user reads the binary attribute it triggers NULL pointer dereference like this one: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: bin_attr_nvmem_read+0x64/0x80 kernfs_fop_read+0xa7/0x180 vfs_read+0xbd/0x170 ksys_read+0x5a/0xd0 do_syscall_64+0x43/0x150 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this in the driver by providing .reg_read callback that always returns an error. Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Fixes: e6b245ccd524 ("thunderbolt: Add support for host and device NVM firmware upgrade") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200213095604.1074-1-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-13Merge tag 'usb-serial-5.6-rc2' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.6-rc2 Here's a fix for a ch341 regression in 5.5 which people have started to hit, and a fix for a logic error in an ir-usb error path. Both have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.6-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: ch341: fix receiver regression USB: serial: ir-usb: Silence harmless uninitialized variable warning
2020-02-13EDAC/sysfs: Remove csrow objects on errorsRobert Richter
All created csrow objects must be removed in the error path of edac_create_csrow_objects(). The objects have been added as devices. They need to be removed by doing a device_del() *and* put_device() call to also free their memory. The missing put_device() leaves a memory leak. Use device_unregister() instead of device_del() which properly unregisters the device doing both. Fixes: 7adc05d2dc3a ("EDAC/sysfs: Drop device references properly") Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: John Garry <john.garry@huawei.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200212120340.4764-4-rrichter@marvell.com
2020-02-13EDAC/mc: Fix use-after-free and memleaks during device removalRobert Richter
A test kernel with the options DEBUG_TEST_DRIVER_REMOVE, KASAN and DEBUG_KMEMLEAK set, revealed several issues when removing an mci device: 1) Use-after-free: On 27.11.19 17:07:33, John Garry wrote: > [ 22.104498] BUG: KASAN: use-after-free in > edac_remove_sysfs_mci_device+0x148/0x180 The use-after-free is caused by the mci_for_each_dimm() macro called in edac_remove_sysfs_mci_device(). The iterator was introduced with c498afaf7df8 ("EDAC: Introduce an mci_for_each_dimm() iterator"). The iterator loop calls device_unregister(&dimm->dev), which removes the sysfs entry of the device, but also frees the dimm struct in dimm_attr_release(). When incrementing the loop in mci_for_each_dimm(), the dimm struct is accessed again, after having been freed already. The fix is to free all the mci device's subsequent dimm and csrow objects at a later point, in _edac_mc_free(), when the mci device itself is being freed. This keeps the data structures intact and the mci device can be fully used until its removal. The change allows the safe usage of mci_for_each_dimm() to release dimm devices from sysfs. 2) Memory leaks: Following memory leaks have been detected: # grep edac /sys/kernel/debug/kmemleak | sort | uniq -c 1 [<000000003c0f58f9>] edac_mc_alloc+0x3bc/0x9d0 # mci->csrows 16 [<00000000bb932dc0>] edac_mc_alloc+0x49c/0x9d0 # csr->channels 16 [<00000000e2734dba>] edac_mc_alloc+0x518/0x9d0 # csr->channels[chn] 1 [<00000000eb040168>] edac_mc_alloc+0x5c8/0x9d0 # mci->dimms 34 [<00000000ef737c29>] ghes_edac_register+0x1c8/0x3f8 # see edac_mc_alloc() All leaks are from memory allocated by edac_mc_alloc(). Note: The test above shows that edac_mc_alloc() was called here from ghes_edac_register(), thus both functions show up in the stack trace but the module causing the leaks is edac_mc. The comments with the data structures involved were made manually by analyzing the objdump. The data structures listed above and created by edac_mc_alloc() are not properly removed during device removal, which is done in edac_mc_free(). There are two paths implemented to remove the device depending on device registration, _edac_mc_free() is called if the device is not registered and edac_unregister_sysfs() otherwise. The implemenations differ. For the sysfs case, the mci device removal lacks the removal of subsequent data structures (csrows, channels, dimms). This causes the memory leaks (see mci_attr_release()). [ bp: Massage commit message. ] Fixes: c498afaf7df8 ("EDAC: Introduce an mci_for_each_dimm() iterator") Fixes: faa2ad09c01c ("edac_mc: edac_mc_free() cannot assume mem_ctl_info is registered in sysfs.") Fixes: 7a623c039075 ("edac: rewrite the sysfs code to use struct device") Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: John Garry <john.garry@huawei.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200212120340.4764-3-rrichter@marvell.com
2020-02-13ALSA: usb-audio: Add clock validity quirk for Denon MC7000/MCX8000Alexander Tsoy
It should be safe to ignore clock validity check result if the following conditions are met: - only one single sample rate is supported; - the terminal is directly connected to the clock source; - the clock type is internal. This is to deal with some Denon DJ controllers that always reports that clock is invalid. Tested-by: Tobias Oszlanyi <toszlanyi@yahoo.de> Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200212235450.697348-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-02-12cifs: Fix mode output in debugging statementsFrank Sorenson
A number of the debug statements output file or directory mode in hex. Change these to print using octal. Signed-off-by: Frank Sorenson <sorenson@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2020-02-12io-wq: don't call kXalloc_node() with non-online nodeJens Axboe
Glauber reports a crash on init on a box he has: RIP: 0010:__alloc_pages_nodemask+0x132/0x340 Code: 18 01 75 04 41 80 ce 80 89 e8 48 8b 54 24 08 8b 74 24 1c c1 e8 0c 48 8b 3c 24 83 e0 01 88 44 24 20 48 85 d2 0f 85 74 01 00 00 <3b> 77 08 0f 82 6b 01 00 00 48 89 7c 24 10 89 ea 48 8b 07 b9 00 02 RSP: 0018:ffffb8be4d0b7c28 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000e8e8 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000002080 RBP: 0000000000012cc0 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000dc0 R11: ffff995c60400100 R12: 0000000000000000 R13: 0000000000012cc0 R14: 0000000000000001 R15: ffff995c60db00f0 FS: 00007f4d115ca900(0000) GS:ffff995c60d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000002088 CR3: 00000017cca66002 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: alloc_slab_page+0x46/0x320 new_slab+0x9d/0x4e0 ___slab_alloc+0x507/0x6a0 ? io_wq_create+0xb4/0x2a0 __slab_alloc+0x1c/0x30 kmem_cache_alloc_node_trace+0xa6/0x260 io_wq_create+0xb4/0x2a0 io_uring_setup+0x97f/0xaa0 ? io_remove_personalities+0x30/0x30 ? io_poll_trigger_evfd+0x30/0x30 do_syscall_64+0x5b/0x1c0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f4d116cb1ed which is due to the 'wqe' and 'worker' allocation being node affine. But it isn't valid to call the node affine allocation if the node isn't online. Setup structures for even offline nodes, as usual, but skip them in terms of thread setup to not waste resources. If the node isn't online, just alloc memory with NUMA_NO_NODE. Reported-by: Glauber Costa <glauber@scylladb.com> Tested-by: Glauber Costa <glauber@scylladb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-12scsi: megaraid_sas: silence a warningTomas Henzl
Add a flag to DMA memory allocation to silence a warning. This driver allocates DMA memory for IO frames. This allocation may exceed MAX_ORDER pages for few megaraid_sas controllers (controllers with very high queue depth). Consequently, the driver has logic to keep reducing the controller queue depth until the DMA memory allocation succeeds. On impacted megaraid_sas controllers there would be multiple DMA allocation failures until driver settled on an allocation that fit. These failed DMA allocation requests caused stack traces in system logs. These were not harmful and this patch silences those warnings/stack traces. [mkp: clarified commit desc] Link: https://lore.kernel.org/r/20200204152413.7107-1-thenzl@redhat.com Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-12scsi: Revert "target/core: Inline transport_lun_remove_cmd()"Bart Van Assche
Commit 83f85b8ec305 postponed the percpu_ref_put(&se_cmd->se_lun->lun_ref) call from command completion to the time when the final command reference is dropped. That approach is not compatible with the iSCSI target driver because the iSCSI target driver keeps the command with the highest stat_sn after it has completed until the next command is received (see also iscsit_ack_from_expstatsn()). Fix this regression by reverting commit 83f85b8ec305. Fixes: 83f85b8ec305 ("scsi: target/core: Inline transport_lun_remove_cmd()") Cc: Pavel Zakharov <pavel.zakharov@delphix.com> Cc: Mike Christie <mchristi@redhat.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200210051202.12934-1-bvanassche@acm.org Reported-by: Pavel Zakharov <pavel.zakharov@delphix.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-12hwmon: (pmbus/xdpe12284) fix typo in compatible stringsJohan Hovold
Make sure that the driver compatible strings matches the binding by removing the space between the manufacturer and model. Fixes: aaafb7c8eb1c ("hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers") Cc: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20200212092426.24012-1-johan@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-02-12drm/panfrost: perfcnt: Reserve/use the AS attached to the perfcnt MMU contextBoris Brezillon
We need to use the AS attached to the opened FD when dumping counters. Reported-by: Antonio Caggiano <antonio.caggiano@collabora.com> Fixes: 7282f7645d06 ("drm/panfrost: Implement per FD address spaces") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Tested-by: Antonio Caggiano <antonio.caggiano@collabora.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200206141327.446127-1-boris.brezillon@collabora.com
2020-02-12tty: serial: qcom_geni_serial: Fix RX cancel command failuresatya priya
RX cancel command fails when BT is switched on and off multiple times. To handle this, poll for the cancel bit in SE_GENI_S_IRQ_STATUS register instead of SE_GENI_S_CMD_CTRL_REG. As per the HPG update, handle the RX last bit after cancel command and flush out the RX FIFO buffer. Signed-off-by: satya priya <skakit@codeaurora.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1581415982-8793-1-git-send-email-skakit@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-12serial: 8250: Check UPF_IRQ_SHARED in advanceAndy Shevchenko
The commit 54e53b2e8081 ("tty: serial: 8250: pass IRQ shared flag to UART ports") nicely explained the problem: ---8<---8<--- On some systems IRQ lines between multiple UARTs might be shared. If so, the irqflags have to be configured accordingly. The reason is: The 8250 port startup code performs IRQ tests *before* the IRQ handler for that particular port is registered. This is performed in serial8250_do_startup(). This function checks whether IRQF_SHARED is configured and only then disables the IRQ line while testing. This test is performed upon each open() of the UART device. Imagine two UARTs share the same IRQ line: On is already opened and the IRQ is active. When the second UART is opened, the IRQ line has to be disabled while performing IRQ tests. Otherwise an IRQ might handler might be invoked, but the IRQ itself cannot be handled, because the corresponding handler isn't registered, yet. That's because the 8250 code uses a chain-handler and invokes the corresponding port's IRQ handling routines himself. Unfortunately this IRQF_SHARED flag isn't configured for UARTs probed via device tree even if the IRQs are shared. This way, the actual and shared IRQ line isn't disabled while performing tests and the kernel correctly detects a spurious IRQ. So, adding this flag to the DT probe solves the issue. Note: The UPF_SHARE_IRQ flag is configured unconditionally. Therefore, the IRQF_SHARED flag can be set unconditionally as well. Example stack trace by performing `echo 1 > /dev/ttyS2` on a non-patched system: |irq 85: nobody cared (try booting with the "irqpoll" option) | [...] |handlers: |[<ffff0000080fc628>] irq_default_primary_handler threaded [<ffff00000855fbb8>] serial8250_interrupt |Disabling IRQ #85 ---8<---8<--- But unfortunately didn't fix the root cause. Let's try again here by moving IRQ flag assignment from serial_link_irq_chain() to serial8250_do_startup(). This should fix the similar issue reported for 8250_pnp case. Since this change we don't need to have custom solutions in 8250_aspeed_vuart and 8250_of drivers, thus, drop them. Fixes: 1c2f04937b3e ("serial: 8250: add IRQ trigger support") Reported-by: Li RongQing <lirongqing@baidu.com> Cc: Kurt Kanzenbach <kurt@linutronix.de> Cc: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable <stable@vger.kernel.org> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20200211135559.85960-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-12tty: serial: imx: setup the correct sg entry for tx dmaFugang Duan
There has oops as below happen on i.MX8MP EVK platform that has 6G bytes DDR memory. when (xmit->tail < xmit->head) && (xmit->head == 0), it setups one sg entry with sg->length is zero: sg_set_buf(sgl + 1, xmit->buf, xmit->head); if xmit->buf is allocated from >4G address space, and SDMA only support <4G address space, then dma_map_sg() will call swiotlb_map() to do bounce buffer copying and mapping. But swiotlb_map() don't allow sg entry's length is zero, otherwise report BUG_ON(). So the patch is to correct the tx DMA scatter list. Oops: [ 287.675715] kernel BUG at kernel/dma/swiotlb.c:497! [ 287.680592] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 287.686075] Modules linked in: [ 287.689133] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.3-00016-g3fdc4e0-dirty #10 [ 287.696872] Hardware name: FSL i.MX8MP EVK (DT) [ 287.701402] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 287.706199] pc : swiotlb_tbl_map_single+0x1fc/0x310 [ 287.711076] lr : swiotlb_map+0x60/0x148 [ 287.714909] sp : ffff800010003c00 [ 287.718221] x29: ffff800010003c00 x28: 0000000000000000 [ 287.723533] x27: 0000000000000040 x26: ffff800011ae0000 [ 287.728844] x25: ffff800011ae09f8 x24: 0000000000000000 [ 287.734155] x23: 00000001b7af9000 x22: 0000000000000000 [ 287.739465] x21: ffff000176409c10 x20: 00000000001f7ffe [ 287.744776] x19: ffff000176409c10 x18: 000000000000002e [ 287.750087] x17: 0000000000000000 x16: 0000000000000000 [ 287.755397] x15: 0000000000000000 x14: 0000000000000000 [ 287.760707] x13: ffff00017f334000 x12: 0000000000000001 [ 287.766018] x11: 00000000001fffff x10: 0000000000000000 [ 287.771328] x9 : 0000000000000003 x8 : 0000000000000000 [ 287.776638] x7 : 0000000000000000 x6 : 0000000000000000 [ 287.781949] x5 : 0000000000200000 x4 : 0000000000000000 [ 287.787259] x3 : 0000000000000001 x2 : 00000001b7af9000 [ 287.792570] x1 : 00000000fbfff000 x0 : 0000000000000000 [ 287.797881] Call trace: [ 287.800328] swiotlb_tbl_map_single+0x1fc/0x310 [ 287.804859] swiotlb_map+0x60/0x148 [ 287.808347] dma_direct_map_page+0xf0/0x130 [ 287.812530] dma_direct_map_sg+0x78/0xe0 [ 287.816453] imx_uart_dma_tx+0x134/0x2f8 [ 287.820374] imx_uart_dma_tx_callback+0xd8/0x168 [ 287.824992] vchan_complete+0x194/0x200 [ 287.828828] tasklet_action_common.isra.0+0x154/0x1a0 [ 287.833879] tasklet_action+0x24/0x30 [ 287.837540] __do_softirq+0x120/0x23c [ 287.841202] irq_exit+0xb8/0xd8 [ 287.844343] __handle_domain_irq+0x64/0xb8 [ 287.848438] gic_handle_irq+0x5c/0x148 [ 287.852185] el1_irq+0xb8/0x180 [ 287.855327] cpuidle_enter_state+0x84/0x360 [ 287.859508] cpuidle_enter+0x34/0x48 [ 287.863083] call_cpuidle+0x18/0x38 [ 287.866571] do_idle+0x1e0/0x280 [ 287.869798] cpu_startup_entry+0x20/0x40 [ 287.873721] rest_init+0xd4/0xe0 [ 287.876949] arch_call_rest_init+0xc/0x14 [ 287.880958] start_kernel+0x420/0x44c [ 287.884622] Code: 9124c021 9417aff8 a94363f7 17ffffd5 (d4210000) [ 287.890718] ---[ end trace 5bc44c4ab6b009ce ]--- [ 287.895334] Kernel panic - not syncing: Fatal exception in interrupt [ 287.901686] SMP: stopping secondary CPUs [ 288.905607] SMP: failed to stop secondary CPUs 0-1 [ 288.910395] Kernel Offset: disabled [ 288.913882] CPU features: 0x0002,2000200c [ 288.917888] Memory Limit: none [ 288.920944] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Reported-by: Eagle Zhou <eagle.zhou@nxp.com> Tested-by: Eagle Zhou <eagle.zhou@nxp.com> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Cc: stable <stable@vger.kernel.org> Fixes: 7942f8577f2a ("serial: imx: TX DMA: clean up sg initialization") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/1581401761-6378-1-git-send-email-fugang.duan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-12linux/pipe_fs_i.h: fix kernel-doc warnings after @wait was splitRandy Dunlap
Fix kernel-doc warnings in struct pipe_inode_info after @wait was split into @rd_wait and @wr_wait. include/linux/pipe_fs_i.h:66: warning: Function parameter or member 'rd_wait' not described in 'pipe_inode_info' include/linux/pipe_fs_i.h:66: warning: Function parameter or member 'wr_wait' not described in 'pipe_inode_info' Fixes: 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-12vt: vt_ioctl: fix race in VT_RESIZEXEric Dumazet
We need to make sure vc_cons[i].d is not NULL after grabbing console_lock(), or risk a crash. general protection fault, probably for non-canonical address 0xdffffc0000000068: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000340-0x0000000000000347] CPU: 1 PID: 19462 Comm: syz-executor.5 Not tainted 5.5.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:vt_ioctl+0x1f96/0x26d0 drivers/tty/vt/vt_ioctl.c:883 Code: 74 41 e8 bd a6 84 fd 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 e4 04 00 00 48 8b 03 48 8d b8 40 03 00 00 48 89 fa 48 c1 ea 03 <42> 0f b6 14 2a 84 d2 74 09 80 fa 03 0f 8e b1 05 00 00 44 89 b8 40 RSP: 0018:ffffc900086d7bb0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffffffff8c34ee88 RCX: ffffc9001415c000 RDX: 0000000000000068 RSI: ffffffff83f0e6e3 RDI: 0000000000000340 RBP: ffffc900086d7cd0 R08: ffff888054ce0100 R09: fffffbfff16a2f6d R10: ffff888054ce0998 R11: ffff888054ce0100 R12: 000000000000001d R13: dffffc0000000000 R14: 1ffff920010daf79 R15: 000000000000ff7f FS: 00007f7d13c12700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd477e3c38 CR3: 0000000095d0a000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tty_ioctl+0xa37/0x14f0 drivers/tty/tty_io.c:2660 vfs_ioctl fs/ioctl.c:47 [inline] ksys_ioctl+0x123/0x180 fs/ioctl.c:763 __do_sys_ioctl fs/ioctl.c:772 [inline] __se_sys_ioctl fs/ioctl.c:770 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:770 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45b399 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f7d13c11c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f7d13c126d4 RCX: 000000000045b399 RDX: 0000000020000080 RSI: 000000000000560a RDI: 0000000000000003 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000666 R14: 00000000004c7f04 R15: 000000000075bf2c Modules linked in: ---[ end trace 80970faf7a67eb77 ]--- RIP: 0010:vt_ioctl+0x1f96/0x26d0 drivers/tty/vt/vt_ioctl.c:883 Code: 74 41 e8 bd a6 84 fd 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 e4 04 00 00 48 8b 03 48 8d b8 40 03 00 00 48 89 fa 48 c1 ea 03 <42> 0f b6 14 2a 84 d2 74 09 80 fa 03 0f 8e b1 05 00 00 44 89 b8 40 RSP: 0018:ffffc900086d7bb0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffffffff8c34ee88 RCX: ffffc9001415c000 RDX: 0000000000000068 RSI: ffffffff83f0e6e3 RDI: 0000000000000340 RBP: ffffc900086d7cd0 R08: ffff888054ce0100 R09: fffffbfff16a2f6d R10: ffff888054ce0998 R11: ffff888054ce0100 R12: 000000000000001d R13: dffffc0000000000 R14: 1ffff920010daf79 R15: 000000000000ff7f FS: 00007f7d13c12700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd477e3c38 CR3: 0000000095d0a000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: stable <stable@vger.kernel.org> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20200210190721.200418-1-edumazet@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-12drm/panfrost: Remove set but not used variable 'bo'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/panfrost/panfrost_job.c: In function 'panfrost_job_cleanup': drivers/gpu/drm/panfrost/panfrost_job.c:278:31: warning: variable 'bo' set but not used [-Wunused-but-set-variable] commit bdefca2d8dc0 ("drm/panfrost: Add the panfrost_gem_mapping concept") involved this unused variable. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Alyssas Rosenzweig <alyssa.rosenzweig@collabora.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200203152724.42611-1-yuehaibing@huawei.com
2020-02-12ice: Trivial fixesTony Nguyen
This is a collection of trivial fixes including fixing whitespace, typos, function headers, reverse Christmas tree, etc. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Use correct netif error functionBen Shelton
Use the correct netif_msg_[tx,rx]_error() function to determine whether to print the MDD event type. Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Cleanup ice_vsi_alloc_q_vectorsAnirudh Venkataramanan
1. Remove local variable num_q_vectors and use vsi->num_q_vectors instead 2. Remove local variable pf and pass vsi->back to ice_pf_to_dev Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Make print statements more compactAnirudh Venkataramanan
Formatting strings in print function calls (like dev_info, dev_err, etc.) can exceed 80 columns without making checkpatch unhappy. So remove newlines where applicable and make print statements more compact. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Use ice_pf_to_devAnirudh Venkataramanan
Use ice_pf_to_dev(pf) instead of &pf->pdev->dev Use ice_pf_to_dev(vsi->back) instead of &vsi->back->pdev->dev When a pointer to the pf instance is available, use ice_pf_to_dev instead of ice_hw_to_dev Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Remove possible null dereferenceTony Nguyen
Commit 1f45ebe0d8fb ("ice: add extra check for null Rx descriptor") moved the call to ice_construct_skb() under a null check as Coverity reported a possible use of null skb. However, the original call was not deleted, do so now. Fixes: 1f45ebe0d8fb ("ice: add extra check for null Rx descriptor") Reported-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: update Unit Load Status bitmask to check after resetBruce Allan
After a reset the Unit Load Status bits in the GLNVM_ULD register to check for completion should be 0x7FF before continuing. Update the mask to check (minus the three reserved bits that are always set). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: fix and consolidate logging of NVM/firmware version informationBruce Allan
Logging the firmware/NVM information during driver load is redundant since that information is also available via ethtool. Move the functionality found in ice_nvm_version_str() directly into ice_get_drvinfo() and remove calling the former and logging that info during driver probe. This also gets rid of a bug in ice_nvm_version_str() where it returns a pointer to a buffer which is free'ed when that function exits. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Modify link message loggingAkeem G Abodunrin
This patch modifies link message logging to include "Full Duplex" and "Negotiated" for FEC, so as to distinguish it from "Requested" FEC. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Remove CONFIG_PCI_IOV wrap in ice_set_pf_capsAnirudh Venkataramanan
Remove unnecessary CONFIG_PCI_IOV wrapping in ice_set_pf_caps. None of the data structures accessed within the block are wrapped with this flag. When CONFIG_PCI_IOV is undefined, pf->num_vfs_supported will be 0 anyway. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Remove ice_dev_onetime_setup()Brett Creeley
ice_dev_onetime_setup contains driver workarounds needed for firmware limitations. These issues have now been resolved in newer NVMs so remove the function. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Don't allow same value for Rx tail to be written twiceBrett Creeley
Currently we compare the value we are about to write to the Rx tail register with the previous value of next_to_use. The problem with this is we only write tail on 8 descriptor boundaries, but next_to_use is updated whenever we clean Rx descriptors. Fix this by comparing the value we are about to write to tail with the previously written tail value. This will prevent duplicate Rx tail bumps. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: display supported and advertised link modesPaul Greenwalt
Display all of the supported and advertised link modes based on the PHY capability with media. Displaying all supported modes is more informative then only displaying the current link mode. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Fix switch between FW and SW LLDPDave Ertman
When switching between FW and SW LLDP mode, the number of configured TLV apps in the driver's DCB configuration is getting out of synch with what lldpad thinks is configured. This is causing a problem when shutting down lldpad. The cleanup is trying to delete TLV apps that are not defined in the kernel. Since the driver is keeping an accurate account of the apps defined, use the drivers number of apps to determine if there is an app to delete. If the number of apps is <= 1, then do not attempt to delete. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Fix DCB rebuild after resetDave Ertman
The function ice_dcb_rebuild had some logic flaws in it, and also didn't differentiate between FW and SW modes needs. For FW flow, the willing setting was being forced to OFF and left that way. Unwilling in DCB FW mode is not a supported model. Leave the config alone and use the return value from the set command to determine if setting the config was successful. The SW DCB flow does not need to need to register for MIB change events (as they are not used in SW mode). Use !is_sw_lldp checks to only perform FW specific task while in FW mode. Also adding a reapplication of the current DCB config after a link event. Some NVMs are not maintaining their DCB configs across link events. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit (git 2.34.1) at 2025-09-11 20:30:16 +0000