summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-08-20LoongArch: KVM: Make function kvm_own_lbt() robustBibo Mao
Add the flag KVM_LARCH_LBT checking in function kvm_own_lbt(), so that it can be called safely rather than duplicated enabling again. Cc: stable@vger.kernel.org Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-20tracing: fprobe-event: Sanitize wildcard for fprobe event nameMasami Hiramatsu (Google)
Fprobe event accepts wildcards for the target functions, but unless user specifies its event name, it makes an event with the wildcards. /sys/kernel/tracing # echo 'f mutex*' >> dynamic_events /sys/kernel/tracing # cat dynamic_events f:fprobes/mutex*__entry mutex* /sys/kernel/tracing # ls events/fprobes/ enable filter mutex*__entry To fix this, replace the wildcard ('*') with an underscore. Link: https://lore.kernel.org/all/175535345114.282990.12294108192847938710.stgit@devnote2/ Fixes: 334e5519c375 ("tracing/probes: Add fprobe events for tracing function entry and exit.") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: stable@vger.kernel.org
2025-08-20s390/mm: Do not map lowcore with identity mappingHeiko Carstens
Since the identity mapping is pinned to address zero the lowcore is always also mapped to address zero, this happens regardless of the relocate_lowcore command line option. If the option is specified the lowcore is mapped twice, instead of only once. This means that NULL pointer accesses will succeed instead of causing an exception (low address protection still applies, but covers only parts). To fix this never map the first two pages of physical memory with the identity mapping. Fixes: 32db401965f1 ("s390/mm: Pin identity mapping base to zero") Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-08-20s390/sclp: Fix SCCB present checkPeter Oberparleiter
Tracing code called by the SCLP interrupt handler contains early exits if the SCCB address associated with an interrupt is NULL. This check is performed after physical to virtual address translation. If the kernel identity mapping does not start at address zero, the resulting virtual address is never zero, so that the NULL checks won't work. Subsequently this may result in incorrect accesses to the first page of the identity mapping. Fix this by introducing a function that handles the NULL case before address translation. Fixes: ada1da31ce34 ("s390/sclp: sort out physical vs virtual pointers usage") Cc: stable@vger.kernel.org Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-08-20s390/configs: Set HZ=1000Heiko Carstens
Similar to powerpc set HZ to 1000. See also commit a206d2334012 ("powerpc/defconfigs: Set HZ=1000 on ppc64 and powernv defconfigs"). Besides other this will reduce the latency seen with synchronize_rcu(). Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-08-20s390/configs: Update defconfigsHeiko Carstens
The usual defconfig updates. Notable changes: - Enable ZONE_DEVICE, and with that DEV_DAX, FS_DAX, and FUSE_DAX - Enable CRYPTO_SELFTESTS_FULL for debug_defconfig - Enable CRASH_DM_CRYPT - Disable legacy IP_NF_FILTER Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-08-20ASoC: cs35l56: Remove SoundWire Clock Divider workaround for CS35L63Stefan Binding
Production silicon for CS36L63 has some small differences compared to pre-production silicon. Remove soundwire clock workaround as no longer necessary. We don't want to do tricks with low-level clocking controls if we don't need to. Fixes: 978858791ced ("ASoC: cs35l56: Add initial support for CS35L63 for I2C and SoundWire") Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://patch.msgid.link/20250820142209.127575-4-sbinding@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-08-20ASoC: cs35l56: Handle new algorithms IDs for CS35L63Richard Fitzgerald
CS35L63 uses different algorithm IDs from CS35L56. Add a new mechanism to handle different alg IDs between parts in the CS35L56 driver. Fixes: 978858791ced ("ASoC: cs35l56: Add initial support for CS35L63 for I2C and SoundWire") Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://patch.msgid.link/20250820142209.127575-3-sbinding@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-08-20ASoC: cs35l56: Update Firmware Addresses for CS35L63 for production siliconStefan Binding
Production silicon for CS36L63 has some small differences compared to pre-production silicon. Update firmware addresses, which are different. No product was ever released with pre-production silicon so there is no need for the driver to include support for it. Fixes: 978858791ced ("ASoC: cs35l56: Add initial support for CS35L63 for I2C and SoundWire") Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://patch.msgid.link/20250820142209.127575-2-sbinding@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-08-20LoongArch: Rename GCC_PLUGIN_STACKLEAK to KSTACK_ERASEHuacai Chen
Commit 57fbad15c2eee772 ("stackleak: Rename STACKLEAK to KSTACK_ERASE") misses the stackframe.h part for LoongArch, so fix it. Fixes: 57fbad15c2eee772 ("stackleak: Rename STACKLEAK to KSTACK_ERASE") Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-20LoongArch: Save LBT before FPU in setup_sigcontext()Huacai Chen
Now if preemption happens between protected_save_fpu_context() and protected_save_lbt_context(), FTOP context is lost. Because FTOP is saved by protected_save_lbt_context() but protected_save_fpu_context() disables TM before that. So save LBT before FPU in setup_sigcontext() to avoid this potential risk. Signed-off-by: Hanlu Li <lihanlu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-20LoongArch: Optimize module load time by optimizing PLT/GOT countingKanglong Wang
When enabling CONFIG_KASAN, CONFIG_PREEMPT_VOLUNTARY_BUILD and CONFIG_PREEMPT_VOLUNTARY at the same time, there will be soft deadlock, the relevant logs are as follows: rcu: INFO: rcu_sched self-detected stall on CPU ... Call Trace: [<900000000024f9e4>] show_stack+0x5c/0x180 [<90000000002482f4>] dump_stack_lvl+0x94/0xbc [<9000000000224544>] rcu_dump_cpu_stacks+0x1fc/0x280 [<900000000037ac80>] rcu_sched_clock_irq+0x720/0xf88 [<9000000000396c34>] update_process_times+0xb4/0x150 [<90000000003b2474>] tick_nohz_handler+0xf4/0x250 [<9000000000397e28>] __hrtimer_run_queues+0x1d0/0x428 [<9000000000399b2c>] hrtimer_interrupt+0x214/0x538 [<9000000000253634>] constant_timer_interrupt+0x64/0x80 [<9000000000349938>] __handle_irq_event_percpu+0x78/0x1a0 [<9000000000349a78>] handle_irq_event_percpu+0x18/0x88 [<9000000000354c00>] handle_percpu_irq+0x90/0xf0 [<9000000000348c74>] handle_irq_desc+0x94/0xb8 [<9000000001012b28>] handle_cpu_irq+0x68/0xa0 [<9000000001def8c0>] handle_loongarch_irq+0x30/0x48 [<9000000001def958>] do_vint+0x80/0xd0 [<9000000000268a0c>] kasan_mem_to_shadow.part.0+0x2c/0x2a0 [<90000000006344f4>] __asan_load8+0x4c/0x120 [<900000000025c0d0>] module_frob_arch_sections+0x5c8/0x6b8 [<90000000003895f0>] load_module+0x9e0/0x2958 [<900000000038b770>] __do_sys_init_module+0x208/0x2d0 [<9000000001df0c34>] do_syscall+0x94/0x190 [<900000000024d6fc>] handle_syscall+0xbc/0x158 After analysis, this is because the slow speed of loading the amdgpu module leads to the long time occupation of the cpu and then the soft deadlock. When loading a module, module_frob_arch_sections() tries to figure out the number of PLTs/GOTs that will be needed to handle all the RELAs. It will call the count_max_entries() to find in an out-of-order date which counting algorithm has O(n^2) complexity. To make it faster, we sort the relocation list by info and addend. That way, to check for a duplicate relocation, it just needs to compare with the previous entry. This reduces the complexity of the algorithm to O(n log n), as done in commit d4e0340919fb ("arm64/module: Optimize module load time by optimizing PLT counting"). This gives sinificant reduction in module load time for modules with large number of relocations. After applying this patch, the soft deadlock problem has been solved, and the kernel starts normally without "Call Trace". Using the default configuration to test some modules, the results are as follows: Module Size ip_tables 36K fat 143K radeon 2.5MB amdgpu 16MB Without this patch: Module Module load time (ms) Count(PLTs/GOTs) ip_tables 18 59/6 fat 0 162/14 radeon 54 1221/84 amdgpu 1411 4525/1098 With this patch: Module Module load time (ms) Count(PLTs/GOTs) ip_tables 18 59/6 fat 0 162/14 radeon 22 1221/84 amdgpu 45 4525/1098 Fixes: fcdfe9d22bed ("LoongArch: Add ELF and module support") Signed-off-by: Kanglong Wang <wangkanglong@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-20LoongArch: Add cpuhotplug hooks to fix high cpu usage of vCPU threadsXianglai Li
When the CPU is offline, the timer of LoongArch is not correctly closed. This is harmless for real machines, but resulting in an excessively high cpu usage rate of the offline vCPU thread in the virtual machines. To correctly close the timer, we have made the following modifications: Register the cpu hotplug event (CPUHP_AP_LOONGARCH_ARCH_TIMER_STARTING) for LoongArch. This event's hooks will be called to close the timer when the CPU is offline. Clear the timer interrupt when the timer is turned off. Since before the timer is turned off, there may be a timer interrupt that has already been in the pending state due to the interruption of the disabled, which also affects the halt state of the offline vCPU. Signed-off-by: Xianglai Li <lixianglai@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-20LoongArch: Increase COMMAND_LINE_SIZE up to 4096Ming Wang
The default COMMAND_LINE_SIZE of 512, inherited from asm-generic, is too small for modern use cases. For example, kdump configurations or extensive debugging parameters can easily exceed this limit. Therefore, increase the command line size to 4096 bytes, aligning LoongArch with the MIPS architecture. This change follows a broader trend among architectures to raise this limit to support modern needs; for instance, PowerPC increased its value for similar reasons in the commit a5980d064fe2 ("powerpc: Bump COMMAND_LINE_SIZE to 2048"). Similar to the change made for RISC-V in the commit 61fc1ee8be26 ("riscv: Bump COMMAND_LINE_SIZE value to 1024"), this is considered a safe change. The broader kernel community has reached a consensus that modifying COMMAND_LINE_SIZE from UAPI headers does not constitute a uABI breakage, as well-behaved userspace applications should not rely on this macro. Suggested-by: Huang Cun <cunhuang@tencent.com> Signed-off-by: Ming Wang <wangming01@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-20LoongArch: Pass annotate-tablejump option if LTO is enabledTiezhu Yang
When compiling with LLVM and CONFIG_LTO_CLANG is set, there exist many objtool warnings "sibling call from callable instruction with modified stack frame". For this special case, the related object file shows that there is no generated relocation section '.rela.discard.tablejump_annotate' for the table jump instruction jirl, thus objtool can not know that what is the actual destination address. It needs to do something on the LLVM side to make sure that there is the relocation section '.rela.discard.tablejump_annotate' if LTO is enabled, but in order to maintain compatibility for the current LLVM compiler, this can be done in the kernel Makefile for now. Ensure it is aware of linker with LTO, '--loongarch-annotate-tablejump' needs to be passed via '-mllvm' to ld.lld. Note that it should also pass the compiler option -mannotate-tablejump rather than only pass '-mllvm --loongarch-annotate-tablejump' to ld.lld if LTO is enabled, otherwise there are no jump info for some table jump instructions. Fixes: e20ab7d454ee ("LoongArch: Enable jump table for objtool") Closes: https://lore.kernel.org/loongarch/20250731175655.GA1455142@ax162/ Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Co-developed-by: WANG Rui <wangrui@loongson.cn> Signed-off-by: WANG Rui <wangrui@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-20objtool/LoongArch: Get table size correctly if LTO is enabledTiezhu Yang
When compiling with LLVM and CONFIG_LTO_CLANG is set, there exist many objtool warnings "sibling call from callable instruction with modified stack frame". For this special case, the related object file shows that there is no generated relocation section '.rela.discard.tablejump_annotate' for the table jump instruction jirl, thus objtool can not know that what is the actual destination address. It needs to do something on the LLVM side to make sure that there is the relocation section '.rela.discard.tablejump_annotate' if LTO is enabled, but in order to maintain compatibility for the current LLVM compiler, this can be done in the kernel Makefile for now. Ensure it is aware of linker with LTO, '--loongarch-annotate-tablejump' needs to be passed via '-mllvm' to ld.lld. Before doing the above changes, it should handle the special case of the relocation section '.rela.discard.tablejump_annotate' to get the correct table size first, otherwise there are many objtool warnings and errors if LTO is enabled. There are many different rodata for each function if LTO is enabled, it is necessary to enhance get_rodata_table_size_by_table_annotate(). Fixes: b95f852d3af2 ("objtool/LoongArch: Add support for switch table") Closes: https://lore.kernel.org/loongarch/20250731175655.GA1455142@ax162/ Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-08-20Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard
Update drm-misc-fixes to -rc2. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-08-20drivers/xen/xenbus: remove quirk for Xen 3.xJuergen Gross
The kernel is not supported to run as a Xen guest on Xen versions older than 4.0. Remove xen_strict_xenbus_quirk() which is testing the Xen version to be at least 4.0. Acked-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Jason Andryuk <jason.andryuk@amd.com> Signed-off-by: Juergen Gross <jgross@suse.com> Message-ID: <20250815074052.13792-1-jgross@suse.com>
2025-08-20ACPI: pfr_update: Fix the driver update version checkChen Yu
The security-version-number check should be used rather than the runtime version check for driver updates. Otherwise, the firmware update would fail when the update binary had a lower runtime version number than the current one. Fixes: 0db89fa243e5 ("ACPI: Introduce Platform Firmware Runtime Update device driver") Cc: 5.17+ <stable@vger.kernel.org> # 5.17+ Reported-by: "Govindarajulu, Hariganesh" <hariganesh.govindarajulu@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Link: https://patch.msgid.link/20250722143233.3970607-1-yu.c.chen@intel.com [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-08-20trace/fgraph: Fix the warning caused by missing unregister notifierYe Weihua
This warning was triggered during testing on v6.16: notifier callback ftrace_suspend_notifier_call already registered WARNING: CPU: 2 PID: 86 at kernel/notifier.c:23 notifier_chain_register+0x44/0xb0 ... Call Trace: <TASK> blocking_notifier_chain_register+0x34/0x60 register_ftrace_graph+0x330/0x410 ftrace_profile_write+0x1e9/0x340 vfs_write+0xf8/0x420 ? filp_flush+0x8a/0xa0 ? filp_close+0x1f/0x30 ? do_dup2+0xaf/0x160 ksys_write+0x65/0xe0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f When writing to the function_profile_enabled interface, the notifier was not unregistered after start_graph_tracing failed, causing a warning the next time function_profile_enabled was written. Fixed by adding unregister_pm_notifier in the exception path. Link: https://lore.kernel.org/20250818073332.3890629-1-yeweihua4@huawei.com Fixes: 4a2b8dda3f870 ("tracing/function-graph-tracer: fix a regression while suspend to disk") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Ye Weihua <yeweihua4@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-08-20ring-buffer: Remove redundant semicolonsLiao Yuanhong
Remove unnecessary semicolons. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20250813095114.559530-1-liaoyuanhong@vivo.com Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-08-20tracing: Limit access to parser->buffer when trace_get_user failedPu Lehui
When the length of the string written to set_ftrace_filter exceeds FTRACE_BUFF_MAX, the following KASAN alarm will be triggered: BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0 Read of size 1 at addr ffff0000d00bd5ba by task ash/165 CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x34/0x50 (C) dump_stack_lvl+0xa0/0x158 print_address_description.constprop.0+0x88/0x398 print_report+0xb0/0x280 kasan_report+0xa4/0xf0 __asan_report_load1_noabort+0x20/0x30 strsep+0x18c/0x1b0 ftrace_process_regex.isra.0+0x100/0x2d8 ftrace_regex_release+0x484/0x618 __fput+0x364/0xa58 ____fput+0x28/0x40 task_work_run+0x154/0x278 do_notify_resume+0x1f0/0x220 el0_svc+0xec/0xf0 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1ac/0x1b0 The reason is that trace_get_user will fail when processing a string longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0. Then an OOB access will be triggered in ftrace_regex_release-> ftrace_process_regex->strsep->strpbrk. We can solve this problem by limiting access to parser->buffer when trace_get_user failed. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20250813040232.1344527-1-pulehui@huaweicloud.com Fixes: 8c9af478c06b ("ftrace: Handle commands when closing set_ftrace_filter file") Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-08-20Merge tag 'iio-fixes-for-6.17a' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus Jonathan writes: IIO: 1st set of fixes for 6.17 Usual mixed bunch of ancient issues and relatively new ones. adi,ad7124 - Fix channel lookup to use chan->address for indexing array. adi,ad7173 - Stop accidentally enabling more configs than supported at one time. adi,ad7380 - Fill in missing max_conversion_rate_hz for adaq4381-4 ams,as73211 - Fix uninitialized holes in scan data exposed to userspace. bosch,bmp280 - Check for error when requesting optional GPIO rather than simply assuming success or a NULL return when no GPIO provided. invensense,icm42600 - Change error code returned to -EBUSY on a temperature read with neither accelerometer nor gyroscope in use. Reduces chance of misinterpretation by userspace. kionix,sca3300 - Fix uninitialized holes in scan data exposed to userspace. maxim,thermocouple - Use a DMA-safe buffer for spi_read(). renesas,isl29501 - Fix ordering issue for big endian systems renesas,rsg2l - Fix an underflow issue around suspend/resume. - Make sure driver data is in place before enabling runtime PM that uses it. rohm,bd79124 - Add missing GPIOLIB dependency. May rework in future to allow this to be optional in future but for now this is the least invasive build fix. * tag 'iio-fixes-for-6.17a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: pressure: bmp280: Use IS_ERR() in bmp280_common_probe() iio: light: as73211: Ensure buffer holes are zeroed iio: adc: rzg2l_adc: Set driver data before enabling runtime PM iio: adc: rzg2l: Cleanup suspend/resume path iio: adc: ad7380: fix missing max_conversion_rate_hz on adaq4381-4 iio: adc: bd79124: Add GPIOLIB dependency iio: imu: inv_icm42600: change invalid data error to -EBUSY iio: adc: ad7124: fix channel lookup in syscalib functions iio: temperature: maxim_thermocouple: use DMA-safe buffer for spi_read() iio: adc: ad7173: prevent scan if too many setups requested iio: proximity: isl29501: fix buffered read on big-endian systems iio: accel: sca3300: fix uninitialized iio scan data
2025-08-20ALSA: hda: tas2781: Fix wrong reference of tasdevice_privTakashi Iwai
During the conversion to unify the calibration data management, the reference to tasdevice_priv was wrongly set to h->hda_priv instead of h->priv. This resulted in memory corruption and crashes eventually. Unfortunately it's a void pointer, hence the compiler couldn't know that it's wrong. Fixes: 4fe238513407 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib") Link: https://bugzilla.suse.com/show_bug.cgi?id=1248270 Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20250820051902.4523-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-08-19Merge branch 'fixes-on-the-microchip-s-lan865x-driver'Jakub Kicinski
Parthiban Veerasooran says: ==================== Fixes on the Microchip's LAN865x driver This patch series includes two bug fixes for the LAN865x Ethernet MAC-PHY driver: 1. Fix missing transmit queue restart on device reopen This patch addresses an issue where the transmit queue is not restarted when the network interface is brought back up after being taken down (e.g., via ip or ifconfig). As a result, packet transmission hangs after the first down/up cycle. The fix ensures netif_start_queue() is explicitly called in lan865x_net_open() to properly restart the queue on every reopen. 2. Fix missing configuration in the Microchip LAN865x driver for silicon revisions B0 and B1, as documented in Microchip Application Note AN1760 (Rev F, June 2024). These revisions require the MAC to be configured for timestamping at the end of the Start of Frame Delimiter (SFD) and the Timer Increment register to be set to 40 ns, corresponding to a 25 MHz internal clock. Both patches address issues introduced with the initial driver support and are marked with the appropriate Fixes: tag. ==================== Link: https://patch.msgid.link/20250818060514.52795-1-parthiban.veerasooran@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19microchip: lan865x: fix missing Timer Increment config for Rev.B0/B1Parthiban Veerasooran
Fix missing configuration for LAN865x silicon revisions B0 and B1 as per Microchip Application Note AN1760 (Rev F, June 2024). The Timer Increment register was not being set, which is required for accurate timestamping. As per the application note, configure the MAC to set timestamping at the end of the Start of Frame Delimiter (SFD), and set the Timer Increment register to 40 ns (corresponding to a 25 MHz internal clock). Link: https://www.microchip.com/en-us/application-notes/an1760 Fixes: 5cd2340cb6a3 ("microchip: lan865x: add driver support for Microchip's LAN865X MAC-PHY") Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250818060514.52795-3-parthiban.veerasooran@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19microchip: lan865x: fix missing netif_start_queue() call on device openParthiban Veerasooran
This fixes an issue where the transmit queue is started implicitly only the very first time the device is registered. When the device is taken down and brought back up again (using `ip` or `ifconfig`), the transmit queue is not restarted, causing packet transmission to hang. Adding an explicit call to netif_start_queue() in lan865x_net_open() ensures the transmit queue is properly started every time the device is reopened. Fixes: 5cd2340cb6a3 ("microchip: lan865x: add driver support for Microchip's LAN865X MAC-PHY") Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com> Link: https://patch.msgid.link/20250818060514.52795-2-parthiban.veerasooran@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19Merge branch 'mlx5-hws-fixes-2025-08-17'Jakub Kicinski
Mark Bloch says: ==================== mlx5 HWS fixes 2025-08-17 The following patch set focuses on hardware steering fixes found by the team. ==================== Link: https://patch.msgid.link/20250817202323.308604-1-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19net/mlx5: CT: Use the correct counter offsetVlad Dogaru
Specifying the counter action is not enough, as it is used by multiple counters that were allocated in a bulk. By omitting the offset, rules will be associated with a different counter from the same bulk. Subsequently, the CT subsystem checks the correct counter, assumes that no traffic has triggered the rule, and ages out the rule. The end result is intermittent offloading of long lived connections, as rules are aged out then promptly re-added. Fix this by specifying the correct offset along with the counter rule. Fixes: 34eea5b12a10 ("net/mlx5e: CT: Add initial support for Hardware Steering") Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250817202323.308604-8-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19net/mlx5: HWS, Fix table creation UIDAlex Vesker
During table creation, caller passes a UID using ft_attr. The UID value was ignored, which leads to problems when the caller sets the UID to a non-zero value, such as SHARED_RESOURCE_UID (0xffff) - the internal FT objects will be created with UID=0. Fixes: 0869701cba3d ("net/mlx5: HWS, added FW commands handling") Signed-off-by: Alex Vesker <valex@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250817202323.308604-7-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19net/mlx5: HWS, don't rehash on every kind of insertion failureYevgeny Kliteynik
If rule creation failed due to a full queue, due to timeout in polling for completion, or due to matcher being in resize, don't try to initiate rehash sequence - rehash would have failed anyway. Fixes: 2111bb970c78 ("net/mlx5: HWS, added backward-compatible API handling") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250817202323.308604-6-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19net/mlx5: HWS, prevent rehash from filling up the queuesYevgeny Kliteynik
While moving the rules during rehash, CQ is not drained. The flush and drain happens only when all the rules of a certain queue have been moved. This behaviour can lead to accumulating large quantity of rules that haven't got their completion yet, and eventually will fill up the queue and will cause the rehash to fail. Fix this problem by requiring drain once the number of outstanding completions reaches a certain threshold. Fixes: ef94799a8741 ("net/mlx5: HWS, rework rehash loop") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250817202323.308604-5-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19net/mlx5: HWS, fix complex rules rehash error flowYevgeny Kliteynik
Moving rules from matcher to matcher should not fail. However, if it does fail due to various reasons, the error flow should allow the kernel to continue functioning (albeit with broken steering rules) instead of going into series of soft lock-ups or some other problematic behaviour. Similar to the simple rules, complex rules rehash logic suffers from the same problems. This patch fixes the error flow for moving complex rules: - If new rule creation fails before it was even enqeued, do not poll for completion - If TIMEOUT happened while moving the rule, no point trying to poll for completions for other rules. Something is broken, completion won't come, just abort the rehash sequence. - If some other completion with error received, don't give up. Continue handling rest of the rules to minimize the damage. - Make sure that the first error code that was received will be actually returned to the caller instead of replacing it with the generic error code. All the aforementioned issues stem from the same bad error flow, so no point fixing them one by one and leaving partially broken code - fixing them in one patch. Fixes: 17e0accac577 ("net/mlx5: HWS, support complex matchers") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250817202323.308604-4-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19net/mlx5: HWS, fix simple rules rehash error flowYevgeny Kliteynik
Moving rules from matcher to matcher should not fail. However, if it does fail due to various reasons, the error flow should allow the kernel to continue functioning (albeit with broken steering rules) instead of going into series of soft lock-ups or some other problematic behaviour. This patch fixes the error flow for moving simple rules: - If new rule creation fails before it was even enqeued, do not poll for completion - If TIMEOUT happened while moving the rule, no point trying to poll for completions for other rules. Something is broken, completion won't come, just abort the rehash sequence. - If some other completion with error received, don't give up. Continue handling rest of the rules to minimize the damage. - Make sure that the first error code that was received will be actually returned to the caller instead of replacing it with the generic error code. All the aforementioned issues stem from the same bad error flow, so no point fixing them one by one and leaving partially broken code - fixing them in one patch. Fixes: ef94799a8741 ("net/mlx5: HWS, rework rehash loop") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250817202323.308604-3-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19net/mlx5: HWS, fix bad parameter in CQ creationYevgeny Kliteynik
'cqe_sz' valid value should be 0 for 64-byte CQE. Fixes: 2ca62599aa0b ("net/mlx5: HWS, added send engine and context handling") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by: Vlad Dogaru <vdogaru@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250817202323.308604-2-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19net/smc: fix UAF on smcsk after smc_listen_out()D. Wythe
BPF CI testing report a UAF issue: [ 16.446633] BUG: kernel NULL pointer dereference, address: 000000000000003 0 [ 16.447134] #PF: supervisor read access in kernel mod e [ 16.447516] #PF: error_code(0x0000) - not-present pag e [ 16.447878] PGD 0 P4D 0 [ 16.448063] Oops: Oops: 0000 [#1] PREEMPT SMP NOPT I [ 16.448409] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Tainted: G OE 6.13.0-rc3-g89e8a75fda73-dirty #4 2 [ 16.449124] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODUL E [ 16.449502] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/201 4 [ 16.450201] Workqueue: smc_hs_wq smc_listen_wor k [ 16.450531] RIP: 0010:smc_listen_work+0xc02/0x159 0 [ 16.452158] RSP: 0018:ffffb5ab40053d98 EFLAGS: 0001024 6 [ 16.452526] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 000000000000030 0 [ 16.452994] RDX: 0000000000000280 RSI: 00003513840053f0 RDI: 000000000000000 0 [ 16.453492] RBP: ffffa097808e3800 R08: ffffa09782dba1e0 R09: 000000000000000 5 [ 16.453987] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa0978274640 0 [ 16.454497] R13: 0000000000000000 R14: 0000000000000000 R15: ffffa09782d4092 0 [ 16.454996] FS: 0000000000000000(0000) GS:ffffa097bbc00000(0000) knlGS:000000000000000 0 [ 16.455557] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003 3 [ 16.455961] CR2: 0000000000000030 CR3: 0000000102788004 CR4: 0000000000770ef 0 [ 16.456459] PKRU: 5555555 4 [ 16.456654] Call Trace : [ 16.456832] <TASK > [ 16.456989] ? __die+0x23/0x7 0 [ 16.457215] ? page_fault_oops+0x180/0x4c 0 [ 16.457508] ? __lock_acquire+0x3e6/0x249 0 [ 16.457801] ? exc_page_fault+0x68/0x20 0 [ 16.458080] ? asm_exc_page_fault+0x26/0x3 0 [ 16.458389] ? smc_listen_work+0xc02/0x159 0 [ 16.458689] ? smc_listen_work+0xc02/0x159 0 [ 16.458987] ? lock_is_held_type+0x8f/0x10 0 [ 16.459284] process_one_work+0x1ea/0x6d 0 [ 16.459570] worker_thread+0x1c3/0x38 0 [ 16.459839] ? __pfx_worker_thread+0x10/0x1 0 [ 16.460144] kthread+0xe0/0x11 0 [ 16.460372] ? __pfx_kthread+0x10/0x1 0 [ 16.460640] ret_from_fork+0x31/0x5 0 [ 16.460896] ? __pfx_kthread+0x10/0x1 0 [ 16.461166] ret_from_fork_asm+0x1a/0x3 0 [ 16.461453] </TASK > [ 16.461616] Modules linked in: bpf_testmod(OE) [last unloaded: bpf_testmod(OE) ] [ 16.462134] CR2: 000000000000003 0 [ 16.462380] ---[ end trace 0000000000000000 ]--- [ 16.462710] RIP: 0010:smc_listen_work+0xc02/0x1590 The direct cause of this issue is that after smc_listen_out_connected(), newclcsock->sk may be NULL since it will releases the smcsk. Therefore, if the application closes the socket immediately after accept, newclcsock->sk can be NULL. A possible execution order could be as follows: smc_listen_work | userspace ----------------------------------------------------------------- lock_sock(sk) | smc_listen_out_connected() | | \- smc_listen_out | | | \- release_sock | | |- sk->sk_data_ready() | | fd = accept(); | close(fd); | \- socket->sk = NULL; /* newclcsock->sk is NULL now */ SMC_STAT_SERV_SUCC_INC(sock_net(newclcsock->sk)) Since smc_listen_out_connected() will not fail, simply swapping the order of the code can easily fix this issue. Fixes: 3b2dec2603d5 ("net/smc: restructure client and server code in af_smc") Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Reviewed-by: Guangguan Wang <guangguan.wang@linux.alibaba.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Dust Li <dust.li@linux.alibaba.com> Link: https://patch.msgid.link/20250818054618.41615-1-alibuda@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19net: stmmac: thead: Enable TX clock before MAC initializationYao Zi
The clk_tx_i clock must be supplied to the MAC for successful initialization. On TH1520 SoC, the clock is provided by an internal divider configured through GMAC_PLLCLK_DIV register when using RGMII interface. However, currently we don't setup the divider before initialization of the MAC, resulting in DMA reset failures if the bootloader/firmware doesn't enable the divider, [ 7.839601] thead-dwmac ffe7060000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 7.938338] thead-dwmac ffe7060000.ethernet eth0: PHY [stmmac-0:02] driver [RTL8211F Gigabit Ethernet] (irq=POLL) [ 8.160746] thead-dwmac ffe7060000.ethernet eth0: Failed to reset the dma [ 8.170118] thead-dwmac ffe7060000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed [ 8.179384] thead-dwmac ffe7060000.ethernet eth0: __stmmac_open: Hw setup failed Let's simply write GMAC_PLLCLK_DIV_EN to GMAC_PLLCLK_DIV to enable the divider before MAC initialization. Note that for reconfiguring the divisor, the divider must be disabled first and re-enabled later to make sure the new divisor take effect. The exact clock rate doesn't affect MAC's initialization according to my test. It's set to the speed required by RGMII when the linkspeed is 1Gbps and could be reclocked later after link is up if necessary. Fixes: 33a1a01e3afa ("net: stmmac: Add glue layer for T-HEAD TH1520 SoC") Signed-off-by: Yao Zi <ziyao@disroot.org> Reviewed-by: Drew Fustini <fustini@kernel.org> Link: https://patch.msgid.link/20250815104803.55294-1-ziyao@disroot.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19gve: prevent ethtool ops after shutdownJordan Rhee
A crash can occur if an ethtool operation is invoked after shutdown() is called. shutdown() is invoked during system shutdown to stop DMA operations without performing expensive deallocations. It is discouraged to unregister the netdev in this path, so the device may still be visible to userspace and kernel helpers. In gve, shutdown() tears down most internal data structures. If an ethtool operation is dispatched after shutdown(), it will dereference freed or NULL pointers, leading to a kernel panic. While graceful shutdown normally quiesces userspace before invoking the reboot syscall, forced shutdowns (as observed on GCP VMs) can still trigger this path. Fix by calling netif_device_detach() in shutdown(). This marks the device as detached so the ethtool ioctl handler will skip dispatching operations to the driver. Fixes: 974365e51861 ("gve: Implement suspend/resume/shutdown") Signed-off-by: Jordan Rhee <jordanrhee@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://patch.msgid.link/20250818211245.1156919-1-jeroendb@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19net: usb: asix_devices: Fix PHY address mask in MDIO bus initializationYuichiro Tsuji
Syzbot reported shift-out-of-bounds exception on MDIO bus initialization. The PHY address should be masked to 5 bits (0-31). Without this mask, invalid PHY addresses could be used, potentially causing issues with MDIO bus operations. Fix this by masking the PHY address with 0x1f (31 decimal) to ensure it stays within the valid range. Fixes: 4faff70959d5 ("net: usb: asix_devices: add phy_mask for ax88772 mdio bus") Reported-by: syzbot+20537064367a0f98d597@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=20537064367a0f98d597 Tested-by: syzbot+20537064367a0f98d597@syzkaller.appspotmail.com Signed-off-by: Yuichiro Tsuji <yuichtsu@amazon.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250818084541.1958-1-yuichtsu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19phy: mscc: Fix timestamping for vsc8584Horatiu Vultur
There was a problem when we received frames and the frames were timestamped. The driver is configured to store the nanosecond part of the timestmap in the ptp reserved bits and it would take the second part by reading the LTC. The problem is that when reading the LTC we are in atomic context and to read the second part will go over mdio bus which might sleep, so we get an error. The fix consists in actually put all the frames in a queue and start the aux work and in that work to read the LTC and then calculate the full received time. Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250818081029.1300780-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19net/sched: sch_dualpi2: Run prob update timer in softirq to avoid deadlockVictor Nogueira
When a user creates a dualpi2 qdisc it automatically sets a timer. This timer will run constantly and update the qdisc's probability field. The issue is that the timer acquires the qdisc root lock and runs in hardirq. The qdisc root lock is also acquired in dev.c whenever a packet arrives for this qdisc. Since the dualpi2 timer callback runs in hardirq, it may interrupt the packet processing running in softirq. If that happens and it runs on the same CPU, it will acquire the same lock and cause a deadlock. The following splat shows up when running a kernel compiled with lock debugging: [ +0.000224] WARNING: inconsistent lock state [ +0.000224] 6.16.0+ #10 Not tainted [ +0.000169] -------------------------------- [ +0.000029] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ +0.000000] ping/156 [HC0[0]:SC0[2]:HE1:SE0] takes: [ +0.000000] ffff897841242110 (&sch->root_lock_key){?.-.}-{3:3}, at: __dev_queue_xmit+0x86d/0x1140 [ +0.000000] {IN-HARDIRQ-W} state was registered at: [ +0.000000] lock_acquire.part.0+0xb6/0x220 [ +0.000000] _raw_spin_lock+0x31/0x80 [ +0.000000] dualpi2_timer+0x6f/0x270 [ +0.000000] __hrtimer_run_queues+0x1c5/0x360 [ +0.000000] hrtimer_interrupt+0x115/0x260 [ +0.000000] __sysvec_apic_timer_interrupt+0x6d/0x1a0 [ +0.000000] sysvec_apic_timer_interrupt+0x6e/0x80 [ +0.000000] asm_sysvec_apic_timer_interrupt+0x1a/0x20 [ +0.000000] pv_native_safe_halt+0xf/0x20 [ +0.000000] default_idle+0x9/0x10 [ +0.000000] default_idle_call+0x7e/0x1e0 [ +0.000000] do_idle+0x1e8/0x250 [ +0.000000] cpu_startup_entry+0x29/0x30 [ +0.000000] rest_init+0x151/0x160 [ +0.000000] start_kernel+0x6f3/0x700 [ +0.000000] x86_64_start_reservations+0x24/0x30 [ +0.000000] x86_64_start_kernel+0xc8/0xd0 [ +0.000000] common_startup_64+0x13e/0x148 [ +0.000000] irq event stamp: 6884 [ +0.000000] hardirqs last enabled at (6883): [<ffffffffa75700b3>] neigh_resolve_output+0x223/0x270 [ +0.000000] hardirqs last disabled at (6882): [<ffffffffa7570078>] neigh_resolve_output+0x1e8/0x270 [ +0.000000] softirqs last enabled at (6880): [<ffffffffa757006b>] neigh_resolve_output+0x1db/0x270 [ +0.000000] softirqs last disabled at (6884): [<ffffffffa755b533>] __dev_queue_xmit+0x73/0x1140 [ +0.000000] other info that might help us debug this: [ +0.000000] Possible unsafe locking scenario: [ +0.000000] CPU0 [ +0.000000] ---- [ +0.000000] lock(&sch->root_lock_key); [ +0.000000] <Interrupt> [ +0.000000] lock(&sch->root_lock_key); [ +0.000000] *** DEADLOCK *** [ +0.000000] 4 locks held by ping/156: [ +0.000000] #0: ffff897842332e08 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x41e/0xf40 [ +0.000000] #1: ffffffffa816f880 (rcu_read_lock){....}-{1:3}, at: ip_output+0x2c/0x190 [ +0.000000] #2: ffffffffa816f880 (rcu_read_lock){....}-{1:3}, at: ip_finish_output2+0xad/0x950 [ +0.000000] #3: ffffffffa816f840 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x73/0x1140 I am able to reproduce it consistently when running the following: tc qdisc add dev lo handle 1: root dualpi2 ping -f 127.0.0.1 To fix it, make the timer run in softirq. Fixes: 320d031ad6e4 ("sched: Struct definition and parsing of dualpi2 qdisc") Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Victor Nogueira <victor@mojatatu.com> Link: https://patch.msgid.link/20250815135317.664993-1-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19rtla: Check pkg-config installTao Chen
The tool pkg-config used to check libtraceevent and libtracefs, if not installed, it will report the libs not found, even though they have already been installed. Before: libtraceevent is missing. Please install libtraceevent-dev/libtraceevent-devel libtracefs is missing. Please install libtracefs-dev/libtracefs-devel After: Makefile.config:10: *** Error: pkg-config needed by libtraceevent/libtracefs is missing on this system, please install it. Link: https://lore.kernel.org/20250808040527.2036023-2-chen.dylane@linux.dev Fixes: 01474dc706ca ("tools/rtla: Use tools/build makefiles to build rtla") Signed-off-by: Tao Chen <chen.dylane@linux.dev> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-08-19tools/latency-collector: Check pkg-config installTao Chen
The tool pkg-config used to check libtraceevent and libtracefs, if not installed, it will report the libs not found, even though they have already been installed. Before: libtraceevent is missing. Please install libtraceevent-dev/libtraceevent-devel libtracefs is missing. Please install libtracefs-dev/libtracefs-devel After: Makefile.config:10: *** Error: pkg-config needed by libtraceevent/libtracefs is missing on this system, please install it. Link: https://lore.kernel.org/20250808040527.2036023-1-chen.dylane@linux.dev Fixes: 9d56c88e5225 ("tools/tracing: Use tools/build makefiles on latency-collector") Signed-off-by: Tao Chen <chen.dylane@linux.dev> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-08-19cdc_ncm: Flag Intel OEM version of Fibocom L850-GL as WWANLubomir Rintel
This lets NetworkManager/ModemManager know that this is a modem and needs to be connected first. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://patch.msgid.link/20250814154214.250103-1-lkundrak@v3.sk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-08-19mm/mremap: fix WARN with uffd that has remap events disabledDavid Hildenbrand
Registering userfaultd on a VMA that spans at least one PMD and then mremap()'ing that VMA can trigger a WARN when recovering from a failed page table move due to a page table allocation error. The code ends up doing the right thing (recurse, avoiding moving actual page tables), but triggering that WARN is unpleasant: WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_normal_pmd mm/mremap.c:357 [inline] WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_pgt_entry mm/mremap.c:595 [inline] WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_page_tables+0x3832/0x44a0 mm/mremap.c:852 Modules linked in: CPU: 2 UID: 0 PID: 6133 Comm: syz.0.19 Not tainted 6.17.0-rc1-syzkaller-00004-g53e760d89498 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:move_normal_pmd mm/mremap.c:357 [inline] RIP: 0010:move_pgt_entry mm/mremap.c:595 [inline] RIP: 0010:move_page_tables+0x3832/0x44a0 mm/mremap.c:852 Code: ... RSP: 0018:ffffc900037a76d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000032930007 RCX: ffffffff820c6645 RDX: ffff88802e56a440 RSI: ffffffff820c7201 RDI: 0000000000000007 RBP: ffff888037728fc0 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000032930007 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc900037a79a8 R14: 0000000000000001 R15: dffffc0000000000 FS: 000055556316a500(0000) GS:ffff8880d68bc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30863fff CR3: 0000000050171000 CR4: 0000000000352ef0 Call Trace: <TASK> copy_vma_and_data+0x468/0x790 mm/mremap.c:1215 move_vma+0x548/0x1780 mm/mremap.c:1282 mremap_to+0x1b7/0x450 mm/mremap.c:1406 do_mremap+0xfad/0x1f80 mm/mremap.c:1921 __do_sys_mremap+0x119/0x170 mm/mremap.c:1977 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f00d0b8ebe9 Code: ... RSP: 002b:00007ffe5ea5ee98 EFLAGS: 00000246 ORIG_RAX: 0000000000000019 RAX: ffffffffffffffda RBX: 00007f00d0db5fa0 RCX: 00007f00d0b8ebe9 RDX: 0000000000400000 RSI: 0000000000c00000 RDI: 0000200000000000 RBP: 00007ffe5ea5eef0 R08: 0000200000c00000 R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000002 R13: 00007f00d0db5fa0 R14: 00007f00d0db5fa0 R15: 0000000000000005 </TASK> The underlying issue is that we recurse during the original page table move, but not during the recovery move. Fix it by checking for both VMAs and performing the check before the pmd_none() sanity check. Add a new helper where we perform+document that check for the PMD and PUD level. Thanks to Harry for bisecting. Link: https://lkml.kernel.org/r/20250818175358.1184757-1-david@redhat.com Fixes: 0cef0bb836e3 ("mm: clear uffd-wp PTE/PMD state on mremap()") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: syzbot+4d9a13f0797c46a29e42@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/689bb893.050a0220.7f033.013a.GAE@google.com Tested-by: Harry Yoo <harry.yoo@oracle.com> Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Pedro Falcato <pfalcato@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-08-19mm/damon/sysfs-schemes: put damos dests dir after removing its filesSeongJae Park
damon_sysfs_scheme_rm_dirs() puts dests directory kobject before removing its internal files. Sincee putting the kobject frees its container struct, and the internal files removal accesses the container, use-after-free happens. Fix it by putting the reference _after_ removing the files. Link: https://lkml.kernel.org/r/20250816165559.2601-1-sj@kernel.org Fixes: 2cd0bf85a203 ("mm/damon/sysfs-schemes: implement DAMOS action destinations directory") Signed-off-by: SeongJae Park <sj@kernel.org> Reported-by: Alexandre Ghiti <alex@ghiti.fr> Closes: https://lore.kernel.org/2d39a734-320d-4341-8f8a-4019eec2dbf2@ghiti.fr Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-08-19mm/migrate: fix NULL movable_ops if CONFIG_ZSMALLOC=mHuacai Chen
After commit 84caf98838a3e5f4bdb34 ("mm: stop storing migration_ops in page->mapping") we get such an error message if CONFIG_ZSMALLOC=m: WARNING: CPU: 3 PID: 42 at mm/migrate.c:142 isolate_movable_ops_page+0xa8/0x1c0 CPU: 3 UID: 0 PID: 42 Comm: kcompactd0 Not tainted 6.16.0-rc5+ #2133 PREEMPT pc 9000000000540bd8 ra 9000000000540b84 tp 9000000100420000 sp 9000000100423a60 a0 9000000100193a80 a1 000000000000000c a2 000000000000001b a3 ffffffffffffffff a4 ffffffffffffffff a5 0000000000000267 a6 0000000000000000 a7 9000000100423ae0 t0 00000000000000f1 t1 00000000000000f6 t2 0000000000000000 t3 0000000000000001 t4 ffffff00010eb834 t5 0000000000000040 t6 900000010c89d380 t7 90000000023fcc70 t8 0000000000000018 u0 0000000000000000 s9 ffffff00010eb800 s0 ffffff00010eb800 s1 000000000000000c s2 0000000000043ae0 s3 0000800000000000 s4 900000000219cc40 s5 0000000000000000 s6 ffffff00010eb800 s7 0000000000000001 s8 90000000025b4000 ra: 9000000000540b84 isolate_movable_ops_page+0x54/0x1c0 ERA: 9000000000540bd8 isolate_movable_ops_page+0xa8/0x1c0 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) CPU: 3 UID: 0 PID: 42 Comm: kcompactd0 Not tainted 6.16.0-rc5+ #2133 PREEMPT Stack : 90000000021fd000 0000000000000000 9000000000247720 9000000100420000 90000001004236a0 90000001004236a8 0000000000000000 90000001004237e8 90000001004237e0 90000001004237e0 9000000100423550 0000000000000001 0000000000000001 90000001004236a8 725a84864a19e2d9 90000000023fcc58 9000000100420000 90000000024c6848 9000000002416848 0000000000000001 0000000000000000 000000000000000a 0000000007fe0000 ffffff00010eb800 0000000000000000 90000000021fd000 0000000000000000 900000000205cf30 000000000000008e 0000000000000009 ffffff00010eb800 0000000000000001 90000000025b4000 0000000000000000 900000000024773c 00007ffff103d748 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1d ... Call Trace: [<900000000024773c>] show_stack+0x5c/0x190 [<90000000002415e0>] dump_stack_lvl+0x70/0x9c [<90000000004abe6c>] isolate_migratepages_block+0x3bc/0x16e0 [<90000000004af408>] compact_zone+0x558/0x1000 [<90000000004b0068>] compact_node+0xa8/0x1e0 [<90000000004b0aa4>] kcompactd+0x394/0x410 [<90000000002b3c98>] kthread+0x128/0x140 [<9000000001779148>] ret_from_kernel_thread+0x28/0xc0 [<9000000000245528>] ret_from_kernel_thread_asm+0x10/0x88 The reason is that defined(CONFIG_ZSMALLOC) evaluates to 1 only when CONFIG_ZSMALLOC=y, we should use IS_ENABLED(CONFIG_ZSMALLOC) instead. But when I use IS_ENABLED(CONFIG_ZSMALLOC), page_movable_ops() cannot access zsmalloc_mops because zsmalloc_mops is in a module. To solve this problem, we define a set_movable_ops() interface to register and unregister offline_movable_ops / zsmalloc_movable_ops in mm/migrate.c, and call them at mm/balloon_compaction.c & mm/zsmalloc.c. Since offline_movable_ops / zsmalloc_movable_ops are always accessible, all #ifdef / #endif are removed in page_movable_ops(). Link: https://lkml.kernel.org/r/20250817151759.2525174-1-chenhuacai@loongson.cn Fixes: 84caf98838a3 ("mm: stop storing migration_ops in page->mapping") Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Acked-by: Zi Yan <ziy@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Huacai Chen <chenhuacai@loongson.cn> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-08-19mm/damon/core: fix damos_commit_filter not changing allowSang-Heon Jeon
Current damos_commit_filter() does not persist the `allow' value of the filter. As a result, changing the `allow' value of a filter and committing doesn't change the `allow' value. Add the missing `allow' value update, so committing the filter persistently changes the `allow' value well. Link: https://lkml.kernel.org/r/20250816015116.194589-1-ekffu200098@gmail.com Fixes: fe6d7fdd6249 ("mm/damon/core: add damos_filter->allow field") Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> [6.14.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-08-19mm/memory-failure: fix infinite UCE for VM_PFNMAP pfnJinjiang Tu
When memory_failure() is called for a already hwpoisoned pfn, kill_accessing_process() will be called to kill current task. However, if the vma of the accessing vaddr is VM_PFNMAP, walk_page_range() will skip the vma in walk_page_test() and return 0. Before commit aaf99ac2ceb7 ("mm/hwpoison: do not send SIGBUS to processes with recovered clean pages"), kill_accessing_process() will return EFAULT. For x86, the current task will be killed in kill_me_maybe(). However, after this commit, kill_accessing_process() simplies return 0, that means UCE is handled properly, but it doesn't actually. In such case, the user task will trigger UCE infinitely. To fix it, add .test_walk callback for hwpoison_walk_ops to scan all vmas. Link: https://lkml.kernel.org/r/20250815073209.1984582-1-tujinjiang@huawei.com Fixes: aaf99ac2ceb7 ("mm/hwpoison: do not send SIGBUS to processes with recovered clean pages") Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Jane Chu <jane.chu@oracle.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Shuai Xue <xueshuai@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-08-19MAINTAINERS: mark MGLRU as maintainedAxel Rasmussen
The three folks being added here are actively working on MGLRU within Google, so we can review patches for this feature and plan to contribute some improvements / extensions to it on an ongoing basis. With three of us we may have some hope filling Yu Zhao's shoes, since he has moved on to other projects these days. Link: https://lkml.kernel.org/r/20250815215914.3671925-1-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Wei Xu <weixugc@google.com> Cc: Yuanchu Xie <yuanchu@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-11 07:23:05 +0000