summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-05-06cpufreq: mediatek: Refine mtk_cpufreq_voltage_tracking()Jia-Wei Chang
Because the difference of sram and proc should in a range of min_volt_shift and max_volt_shift. We need to adjust the sram and proc step by step. We replace VOLT_TOL (voltage tolerance) with the platform data and update the logic to determine the voltage boundary and invoking regulator_set_voltage. - Use 'sram_min_volt' and 'sram_max_volt' to determine the voltage boundary of sram regulator. - Use (sram_min_volt - min_volt_shift) and 'proc_max_volt' to determine the voltage boundary of vproc regulator. Moreover, to prevent infinite loop when tracking voltage, we calculate the maximum value for each platform data. We assume min voltage is 0 and tracking target voltage using min_volt_shift for each iteration. The retry_max is 3 times of expeted iteration count. Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-05-06cpufreq: mediatek: Move voltage limits to platform dataRex-BC Chen
Voltages and shifts are defined as macros originally. There are different requirements of these values for each MediaTek SoCs. Therefore, we add the platform data and move these values into it. Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-05-06cpufreq: mediatek: Unregister platform device on exitRex-BC Chen
We register the platform device when driver inits. However, we do not unregister it when driver exits. To resolve this, we declare the platform data to be a global static variable and rename it to be "cpufreq_pdev". With this global variable, we can do platform_device_unregister() when driver exits. Fixes: 501c574f4e3a ("cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoC") Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> [ Viresh: Commit log and Subject ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-27cpufreq: mediatek: Fix NULL pointer dereference in mediatek-cpufreqWan Jiabing
Fix following coccicheck error: drivers/cpufreq/mediatek-cpufreq.c:464:16-23: ERROR: info is NULL but dereferenced. Use pr_err instead of dev_err to avoid dereferring a NULL pointer. Fixes: f52b16ba9fe4 ("cpufreq: mediatek: Use device print to show logs") Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-26cpufreq: mediatek: Make sram regulator optionalJia-Wei Chang
For some MediaTek SoCs, like MT8186, it's possible that the sram regulator is shared between CPU and CCI. We hope regulator framework can return error for error handling rather than a dummy handler from regulator_get api. Therefore, we choose to use regulator_get_optional. Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-26cpufreq: mediatek: Record previous target vproc valueJia-Wei Chang
We found the buck voltage may not be exactly the same with what we set because CPU may share the same buck with other module. Therefore, we need to record the previous desired value instead of reading it from regulators. Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng@mediatek.com> Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-26cpufreq: mediatek: Replace old_* with pre_*Rex-BC Chen
To make driver more readable, replace old_* with pre_*. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-26cpufreq: mediatek: Use device print to show logsRex-BC Chen
- Replace pr_* with dev_* to show logs. - Remove usage of __func__. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-26cpufreq: mediatek: Enable clocks and regulatorsJia-Wei Chang
We need to enable regulators so that the max and min requested values will be recorded. The intermediate clock is not always enabled by CCF in different projects, so we should enable it in the cpufreq driver. Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng@mediatek.com> Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-26cpufreq: mediatek: Remove unused headersJia-Wei Chang
Remove unused headers. Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-26cpufreq: mediatek: Cleanup variables and error handling in ↵Jia-Wei Chang
mtk_cpu_dvfs_info_init() - Remove several unnecessary varaibles in mtk_cpu_dvfs_info_init(). - Unify error message format and use dev_err_probe() if possible. Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com> Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-26cpufreq: mediatek: Use module_init and add module_exitJia-Wei Chang
- Use module_init instead of device_initcall. - Add a function for module_exit to unregister driver. Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-26arm64: tegra: add node for tegra234 cpufreqSumit Gupta
Adding cclpex node to represent Tegra234 cpufreq. Tegra234 uses some of the CRAB (Control Register Access Bus) registers for cpu frequency requests. These registers are memory mapped to CCPLEX_MMCRAB_ARM region. In this node, mapping the range of MMCRAB registers required only for cpu frequency info. Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-26cpufreq: tegra194: Add support for Tegra234Sumit Gupta
This patch adds driver support for Tegra234 cpufreq. Tegra234 has per core MMIO registers instead of system registers for cpu frequency requests and to read the counters for re-constructing the cpu frequency. Also, MPIDR affinity info in Tegra234 is different from Tegra194. Added ops hooks and soc data for Tegra234. This will help to easily add variants of Tegra234 and future SoC's which use similar logic to {get|set} the cpu frequency. Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-26cpufreq: tegra194: add soc data to support multiple socSumit Gupta
Adding SoC data and ops to support multiple SoC's in same driver. Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-26dt-bindings: Document Tegra CCPLEX ClusterSumit Gupta
The Tegra CPU COMPLEX CLUSTER area contains memory-mapped registers that initiate CPU frequency/voltage transitions. Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-26cpufreq: qcom-cpufreq-hw: Clear dcvs interruptsVladimir Zapolskiy
It's noted that dcvs interrupts are not self-clearing, thus an interrupt handler runs constantly, which leads to a severe regression in runtime. To fix the problem an explicit write to clear interrupt register is required, note that on OSM platforms the register may not be present. Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support") Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-25cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probeXiaobing Luo
-------------------------------------------- unreferenced object 0xffff000010742a00 (size 128): comm "swapper/0", pid 1, jiffies 4294902015 (age 1187.652s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000b4dfebaa>] __kmalloc+0x338/0x474 [<00000000d6e716db>] sun50i_cpufreq_nvmem_probe+0xc4/0x36c [<000000007d6082a0>] platform_probe+0x98/0x11c [<00000000c990f549>] really_probe+0x234/0x5a0 [<000000002d9fecc6>] __driver_probe_device+0x194/0x224 [<00000000cf0b94fa>] driver_probe_device+0x64/0x13c [<00000000f238e4cf>] __device_attach_driver+0xf8/0x180 [<000000006720e418>] bus_for_each_drv+0xf8/0x160 [<00000000df4f14f6>] __device_attach+0x174/0x29c [<00000000782002fb>] device_initial_probe+0x20/0x30 [<00000000c2681b06>] bus_probe_device+0xfc/0x110 [<00000000964cf3bd>] device_add+0x5f0/0xcd0 [<000000004b9264e3>] platform_device_add+0x198/0x390 [<00000000fa82a9d0>] platform_device_register_full+0x178/0x210 [<000000009a5daf13>] sun50i_cpufreq_init+0xf8/0x168 [<000000000377cc7c>] do_one_initcall+0xe4/0x570 -------------------------------------------- if sun50i_cpufreq_get_efuse failed, then opp_tables leak. Fixes: f328584f7bff ("cpufreq: Add sun50i nvmem based CPU scaling driver") Signed-off-by: Xiaobing Luo <luoxiaobing0926@gmail.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-04cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS platformsVladimir Zapolskiy
On QCOM platforms with EPSS flavour of cpufreq IP a throttled frequency is obtained from another register REG_DOMAIN_STATE, thus the helper function qcom_lmh_get_throttle_freq() should be modified accordingly, as for now it returns gibberish since .reg_current_vote is unset for EPSS hardware. To exclude a hardcoded magic number 19200 it is replaced by "xo" clock rate in KHz. Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support") Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-04cpufreq: qcom-hw: provide online/offline operationsDmitry Baryshkov
Provide lightweight online and offline operations. This saves us from parsing and tearing down the OPP tables each time the CPU is put online or offline. Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-04cpufreq: qcom-hw: fix the opp entries refcountingDmitry Baryshkov
The qcom_lmh_dcvs_notify() will get the dev_pm_opp instance for throttling, but will not put it, ending up with leaking a reference count and the following backtrace when putting the CPU offline. Correctly put the reference count of the returned opp instance. [ 84.418025] ------------[ cut here ]------------ [ 84.422770] WARNING: CPU: 7 PID: 43 at drivers/opp/core.c:1396 _opp_table_kref_release+0x188/0x190 [ 84.431966] Modules linked in: [ 84.435106] CPU: 7 PID: 43 Comm: cpuhp/7 Tainted: G S 5.17.0-rc6-00388-g7cf3c0d89c44-dirty #721 [ 84.451631] pstate: 82400005 (Nzcv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--) [ 84.458781] pc : _opp_table_kref_release+0x188/0x190 [ 84.463878] lr : _opp_table_kref_release+0x78/0x190 [ 84.468885] sp : ffff80000841bc70 [ 84.472294] x29: ffff80000841bc70 x28: ffff6664afe3d000 x27: ffff1db6729e5908 [ 84.479621] x26: 0000000000000000 x25: 0000000000000000 x24: ffff1db6729e58e0 [ 84.486946] x23: ffff8000080a5000 x22: ffff1db40aad80e0 x21: ffff1db4002fec80 [ 84.494277] x20: ffff1db40aad8000 x19: ffffb751c3186300 x18: ffffffffffffffff [ 84.501603] x17: 5300326563697665 x16: 645f676e696c6f6f x15: 00001186c1df5448 [ 84.508928] x14: 00000000000002e9 x13: 0000000000000000 x12: 0000000000000000 [ 84.516256] x11: ffffb751c3186368 x10: ffffb751c39a2a70 x9 : 0000000000000000 [ 84.523585] x8 : ffff1db4008edf00 x7 : ffffb751c328c000 x6 : 0000000000000001 [ 84.530916] x5 : 0000000000040000 x4 : 0000000000000001 x3 : ffff1db4008edf00 [ 84.538247] x2 : 0000000000000000 x1 : ffff1db400aa6100 x0 : ffff1db40aad80d0 [ 84.545579] Call trace: [ 84.548101] _opp_table_kref_release+0x188/0x190 [ 84.552842] dev_pm_opp_remove_all_dynamic+0x8c/0xc0 [ 84.557949] qcom_cpufreq_hw_cpu_exit+0x30/0xdc [ 84.562608] cpufreq_offline.isra.0+0x1b4/0x1d8 [ 84.567270] cpuhp_cpufreq_offline+0x10/0x6c [ 84.571663] cpuhp_invoke_callback+0x16c/0x2b0 [ 84.576231] cpuhp_thread_fun+0x190/0x250 [ 84.580353] smpboot_thread_fn+0x12c/0x230 [ 84.584568] kthread+0xfc/0x100 [ 84.587810] ret_from_fork+0x10/0x20 [ 84.591490] irq event stamp: 3482 [ 84.594901] hardirqs last enabled at (3481): [<ffffb751c13c3db0>] call_rcu+0x39c/0x50c [ 84.603119] hardirqs last disabled at (3482): [<ffffb751c236b518>] el1_dbg+0x24/0x8c [ 84.611074] softirqs last enabled at (310): [<ffffb751c1290410>] _stext+0x410/0x588 [ 84.619028] softirqs last disabled at (305): [<ffffb751c131bf68>] __irq_exit_rcu+0x158/0x174 [ 84.627691] ---[ end trace 0000000000000000 ]--- Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support") Reported-by: kernel test robot <lkp@intel.com> Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-04cpufreq: qcom-hw: fix the race between LMH worker and cpuhpDmitry Baryshkov
The driver would disable the worker when cpu is being put offline, but it happens closer to the end of cpufreq_offline(). The function qcom_lmh_dcvs_poll() can be running in parallel with this, when policy->cpus already has been updated. Read policy->related_cpus instead. [ 37.122433] ------------[ cut here ]------------ [ 37.127225] WARNING: CPU: 0 PID: 187 at drivers/base/arch_topology.c:180 topology_update_thermal_pressure+0xec/0x100 [ 37.138098] Modules linked in: [ 37.141279] CPU: 0 PID: 187 Comm: kworker/0:3 Tainted: G S 5.17.0-rc6-00389-g37c83d0b8710-dirty #713 [ 37.158306] Workqueue: events qcom_lmh_dcvs_poll [ 37.163095] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 37.170278] pc : topology_update_thermal_pressure+0xec/0x100 [ 37.176131] lr : topology_update_thermal_pressure+0x20/0x100 [ 37.181977] sp : ffff800009b6bce0 [ 37.185402] x29: ffff800009b6bce0 x28: ffffd87abe92b000 x27: ffff04bd7292e205 [ 37.192792] x26: ffffd87abe930af8 x25: ffffd87abe94e4c8 x24: 0000000000000000 [ 37.200180] x23: ffff04bb01177018 x22: ffff04bb011770c0 x21: ffff04bb01177000 [ 37.207567] x20: ffff04bb0a419000 x19: 00000000000c4e00 x18: 0000000000000000 [ 37.214954] x17: 000000040044ffff x16: 004000b2b5503510 x15: 0000006aaa1326d2 [ 37.222333] x14: 0000000000000232 x13: 0000000000000001 x12: 0000000000000040 [ 37.229718] x11: ffff04bb00400000 x10: 968f57bd39f701c8 x9 : ffff04bb0acc8674 [ 37.237095] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffffd87abd90092c [ 37.244478] x5 : 0000000000000016 x4 : 0000000000000000 x3 : 0000000000000100 [ 37.251852] x2 : ffff04bb0a419020 x1 : 0000000000000100 x0 : 0000000000000100 [ 37.259235] Call trace: [ 37.261771] topology_update_thermal_pressure+0xec/0x100 [ 37.267266] qcom_lmh_dcvs_poll+0xbc/0x154 [ 37.271505] process_one_work+0x288/0x69c [ 37.275654] worker_thread+0x74/0x470 [ 37.279450] kthread+0xfc/0x100 [ 37.282712] ret_from_fork+0x10/0x20 [ 37.286417] irq event stamp: 74 [ 37.289664] hardirqs last enabled at (73): [<ffffd87abdd78af4>] _raw_spin_unlock_irq+0x44/0x80 [ 37.298632] hardirqs last disabled at (74): [<ffffd87abdd71fc0>] __schedule+0x710/0xa10 [ 37.306885] softirqs last enabled at (58): [<ffffd87abcc90410>] _stext+0x410/0x588 [ 37.314778] softirqs last disabled at (51): [<ffffd87abcd1bf68>] __irq_exit_rcu+0x158/0x174 [ 37.323386] ---[ end trace 0000000000000000 ]--- Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-04cpufreq: qcom-hw: drop affinity hint before freeing the IRQDmitry Baryshkov
Drop affinity hint before freeing the throttling IRQ to fix the following trace: [ 185.114773] ------------[ cut here ]------------ [ 185.119517] WARNING: CPU: 7 PID: 43 at kernel/irq/manage.c:1887 free_irq+0x3a4/0x3dc [ 185.127474] Modules linked in: [ 185.130618] CPU: 7 PID: 43 Comm: cpuhp/7 Tainted: G S W 5.17.0-rc6-00386-g67382a5b705d-dirty #690 [ 185.147125] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 185.154269] pc : free_irq+0x3a4/0x3dc [ 185.158031] lr : free_irq+0x33c/0x3dc [ 185.161792] sp : ffff80000841bc90 [ 185.165195] x29: ffff80000841bc90 x28: ffffa6edc5c3d000 x27: ffff6d93729e5908 [ 185.172515] x26: 0000000000000000 x25: ffff6d910109fc00 x24: ffff6d91011490e0 [ 185.179838] x23: ffff6d9101149218 x22: 0000000000000080 x21: 0000000000000000 [ 185.187163] x20: ffff6d9101149000 x19: ffff6d910ab61500 x18: ffffffffffffffff [ 185.194487] x17: 2e35202020202020 x16: 2020202020202020 x15: ffff80008841b9a7 [ 185.201805] x14: 00000000000003c9 x13: 0000000000000001 x12: 0000000000000040 [ 185.209135] x11: ffff6d91005aab58 x10: ffff6d91005aab5a x9 : ffffc6a5ad1c5408 [ 185.216455] x8 : ffff6d91005adb88 x7 : 0000000000000000 x6 : ffffc6a5ab5a91f4 [ 185.223776] x5 : 0000000000000000 x4 : ffff6d91011490a8 x3 : ffffc6a5ad266108 [ 185.231098] x2 : 0000000013033204 x1 : ffff6d9101149000 x0 : ffff6d910a9cc000 [ 185.238421] Call trace: [ 185.240932] free_irq+0x3a4/0x3dc [ 185.244334] qcom_cpufreq_hw_cpu_exit+0x78/0xcc [ 185.248985] cpufreq_offline.isra.0+0x228/0x270 [ 185.253639] cpuhp_cpufreq_offline+0x10/0x20 [ 185.258027] cpuhp_invoke_callback+0x16c/0x2b0 [ 185.262592] cpuhp_thread_fun+0x190/0x250 [ 185.266710] smpboot_thread_fn+0x12c/0x230 [ 185.270914] kthread+0xfc/0x100 [ 185.274145] ret_from_fork+0x10/0x20 [ 185.277820] irq event stamp: 212 [ 185.281136] hardirqs last enabled at (211): [<ffffc6a5ac57973c>] _raw_spin_unlock_irqrestore+0x8c/0xa0 [ 185.290775] hardirqs last disabled at (212): [<ffffc6a5ac572100>] __schedule+0x710/0xa10 [ 185.299081] softirqs last enabled at (0): [<ffffc6a5ab50f7b0>] copy_process+0x7d0/0x1a14 [ 185.307475] softirqs last disabled at (0): [<0000000000000000>] 0x0 Fixes: 3ed6dfbd3bb98 ("cpufreq: qcom-hw: Set CPU affinity of dcvsh interrupts") Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-03Linux 5.18-rc1v5.18-rc1Linus Torvalds
2022-04-03Merge tag 'trace-v5.18-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing updates from Steven Rostedt: - Rename the staging files to give them some meaning. Just stage1,stag2,etc, does not show what they are for - Check for NULL from allocation in bootconfig - Hold event mutex for dyn_event call in user events - Mark user events to broken (to work on the API) - Remove eBPF updates from user events - Remove user events from uapi header to keep it from being installed. - Move ftrace_graph_is_dead() into inline as it is called from hot paths and also convert it into a static branch. * tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Move user_events.h temporarily out of include/uapi ftrace: Make ftrace_graph_is_dead() a static branch tracing: Set user_events to BROKEN tracing/user_events: Remove eBPF interfaces tracing/user_events: Hold event_mutex during dyn_event_add proc: bootconfig: Add null pointer check tracing: Rename the staging files for trace_events
2022-04-03Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "A single revert to fix a boot regression seen when clk_put() started dropping rate range requests. It's best to keep various systems booting so we'll kick this out and try again next time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Revert "clk: Drop the rate range on clk_put()"
2022-04-03Merge tag 'x86-urgent-2022-04-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes and updates: - Make the prctl() for enabling dynamic XSTATE components correct so it adds the newly requested feature to the permission bitmap instead of overwriting it. Add a selftest which validates that. - Unroll string MMIO for encrypted SEV guests as the hypervisor cannot emulate it. - Handle supervisor states correctly in the FPU/XSTATE code so it takes the feature set of the fpstate buffer into account. The feature sets can differ between host and guest buffers. Guest buffers do not contain supervisor states. So far this was not an issue, but with enabling PASID it needs to be handled in the buffer offset calculation and in the permission bitmaps. - Avoid a gazillion of repeated CPUID invocations in by caching the values early in the FPU/XSTATE code. - Enable CONFIG_WERROR in x86 defconfig. - Make the X86 defconfigs more useful by adapting them to Y2022 reality" * tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu/xstate: Consolidate size calculations x86/fpu/xstate: Handle supervisor states in XSTATE permissions x86/fpu/xsave: Handle compacted offsets correctly with supervisor states x86/fpu: Cache xfeature flags from CPUID x86/fpu/xsave: Initialize offset/size cache early x86/fpu: Remove unused supervisor only offsets x86/fpu: Remove redundant XCOMP_BV initialization x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO x86/config: Make the x86 defconfigs a bit more usable x86/defconfig: Enable WERROR selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
2022-04-03Merge tag 'core-urgent-2022-04-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RT signal fix from Thomas Gleixner: "Revert the RT related signal changes. They need to be reworked and generalized" * tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
2022-04-03Merge tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull more dma-mapping updates from Christoph Hellwig: - fix a regression in dma remap handling vs AMD memory encryption (me) - finally kill off the legacy PCI DMA API (Christophe JAILLET) * tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: move pgprot_decrypted out of dma_pgprot PCI/doc: cleanup references to the legacy PCI DMA API PCI: Remove the deprecated "pci-dma-compat.h" API
2022-04-03Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: - avoid unnecessary rebuilds for library objects - fix return value of __setup handlers - fix invalid input check for "crashkernel=" kernel option - silence KASAN warnings in unwind_frame * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame() ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0' ARM: 9187/1: JIVE: fix return value of __setup handler ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects
2022-04-02Revert "clk: Drop the rate range on clk_put()"Stephen Boyd
This reverts commit 7dabfa2bc4803eed83d6f22bd6f045495f40636b. There are multiple reports that this breaks boot on various systems. The common theme is that orphan clks are having rates set on them when that isn't expected. Let's revert it out for now so that -rc1 boots. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Tony Lindgren <tony@atomide.com> Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org
2022-04-02Merge tag 'perf-tools-for-v5.18-2022-04-02' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Avoid SEGV if core.cpus isn't set in 'perf stat'. - Stop depending on .git files for building PERF-VERSION-FILE, used in 'perf --version', fixing some perf tools build scenarios. - Convert tracepoint.py example to python3. - Update UAPI header copies from the kernel sources: socket, mman-common, msr-index, KVM, i915 and cpufeatures. - Update copy of libbpf's hashmap.c. - Directly return instead of using local ret variable in evlist__create_syswide_maps(), found by coccinelle. * tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf python: Convert tracepoint.py example to python3 perf evlist: Directly return instead of using local ret variable perf cpumap: More cpu map reuse by merge. perf cpumap: Add is_subset function perf evlist: Rename cpus to user_requested_cpus perf tools: Stop depending on .git files for building PERF-VERSION-FILE tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools kvm headers arm64: Update KVM headers from the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers UAPI: Sync asm-generic/mman-common.h with the kernel perf beauty: Update copy of linux/socket.h with the kernel sources perf tools: Update copy of libbpf's hashmap.c perf stat: Avoid SEGV if core.cpus isn't set
2022-04-02Merge tag 'kbuild-fixes-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix empty $(PYTHON) expansion. - Fix UML, which got broken by the attempt to suppress Clang warnings. - Fix warning message in modpost. * tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: modpost: restore the warning message for missing symbol versions Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS" kbuild: Remove '-mno-global-merge' kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh kconfig: remove stale comment about removed kconfig_print_symbol()
2022-04-02Merge tag 'mips_5.18_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - build fix for gpio - fix crc32 build problems - check for failed memory allocations * tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: crypto: Fix CRC32 code MIPS: rb532: move GPIOD definition into C-files MIPS: lantiq: check the return value of kzalloc() mips: sgi-ip22: add a check for the return of kzalloc()
2022-04-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr - Documentation improvements - Prevent module exit until all VMs are freed - PMU Virtualization fixes - Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences - Other miscellaneous bugfixes * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits) KVM: x86: fix sending PV IPI KVM: x86/mmu: do compare-and-exchange of gPTE via the user address KVM: x86: Remove redundant vm_entry_controls_clearbit() call KVM: x86: cleanup enter_rmode() KVM: x86: SVM: fix tsc scaling when the host doesn't support it kvm: x86: SVM: remove unused defines KVM: x86: SVM: move tsc ratio definitions to svm.h KVM: x86: SVM: fix avic spec based definitions again KVM: MIPS: remove reference to trap&emulate virtualization KVM: x86: document limitations of MSR filtering KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr KVM: x86/emulator: Emulate RDPID only if it is enabled in guest KVM: x86/pmu: Fix and isolate TSX-specific performance event logic KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs KVM: x86: Trace all APICv inhibit changes and capture overall status KVM: x86: Add wrappers for setting/clearing APICv inhibits KVM: x86: Make APICv inhibit reasons an enum and cleanup naming KVM: X86: Handle implicit supervisor access with SMAP KVM: X86: Rename variable smap to not_smap in permission_fault() ...
2022-04-03modpost: restore the warning message for missing symbol versionsMasahiro Yamada
This log message was accidentally chopped off. I was wondering why this happened, but checking the ML log, Mark precisely followed my suggestion [1]. I just used "..." because I was too lazy to type the sentence fully. Sorry for the confusion. [1]: https://lore.kernel.org/all/CAK7LNAR6bXXk9-ZzZYpTqzFqdYbQsZHmiWspu27rtsFxvfRuVA@mail.gmail.com/ Fixes: 4a6795933a89 ("kbuild: modpost: Explicitly warn about unprototyped symbols") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2022-04-02Merge tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver fix from Jens Axboe: "Got two reports on nbd spewing warnings on load now, which is a regression from a commit that went into your tree yesterday. Revert the problematic change for now" * tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block: Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"
2022-04-02Merge tag 'pci-v5.18-changes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fix from Bjorn Helgaas: - Fix Hyper-V "defined but not used" build issue added during merge window (YueHaibing) * tag 'pci-v5.18-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: hv: Remove unused hv_set_msi_entry_from_desc()
2022-04-02Merge tag 'tag-chrome-platform-for-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros_ec_typec: - Check for EC device - Fix a crash when using the cros_ec_typec driver on older hardware not capable of typec commands - Make try power role optional - Mux configuration reorganization series from Prashant cros_ec_debugfs: - Fix use after free. Thanks Tzung-bi sensorhub: - cros_ec_sensorhub fixup - Split trace include file misc: - Add new mailing list for chrome-platform development: chrome-platform@lists.linux.dev Now with patchwork!" * tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_debugfs: detach log reader wq from devm platform: chrome: Split trace include file platform/chrome: cros_ec_typec: Update mux flags during partner removal platform/chrome: cros_ec_typec: Configure muxes at start of port update platform/chrome: cros_ec_typec: Get mux state inside configure_mux platform/chrome: cros_ec_typec: Move mux flag checks platform/chrome: cros_ec_typec: Check for EC device platform/chrome: cros_ec_typec: Make try power role optional MAINTAINERS: platform-chrome: Add new chrome-platform@lists.linux.dev list
2022-04-02Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"Jens Axboe
This reverts commit 6d35d04a9e18990040e87d2bbf72689252669d54. Both Gabriel and Borislav report that this commit casues a regression with nbd: sysfs: cannot create duplicate filename '/dev/block/43:0' Revert it before 5.18-rc1 and we'll investigage this separately in due time. Link: https://lore.kernel.org/all/YkiJTnFOt9bTv6A2@zn.tnic/ Reported-by: Gabriel L. Somlo <somlo@cmu.edu> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-02watch_queue: Free the page array when watch_queue is dismantledEric Dumazet
Commit 7ea1a0124b6d ("watch_queue: Free the alloc bitmap when the watch_queue is torn down") took care of the bitmap, but not the page array. BUG: memory leak unreferenced object 0xffff88810d9bc140 (size 32): comm "syz-executor335", pid 3603, jiffies 4294946994 (age 12.840s) hex dump (first 32 bytes): 40 a7 40 04 00 ea ff ff 00 00 00 00 00 00 00 00 @.@............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: kmalloc_array include/linux/slab.h:621 [inline] kcalloc include/linux/slab.h:652 [inline] watch_queue_set_size+0x12f/0x2e0 kernel/watch_queue.c:251 pipe_ioctl+0x82/0x140 fs/pipe.c:632 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] Reported-by: syzbot+25ea042ae28f3888727a@syzkaller.appspotmail.com Fixes: c73be61cede5 ("pipe: Add general notification queue support") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20220322004654.618274-1-eric.dumazet@gmail.com/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-02tracing: mark user_events as BROKENSteven Rostedt (Google)
After being merged, user_events become more visible to a wider audience that have concerns with the current API. It is too late to fix this for this release, but instead of a full revert, just mark it as BROKEN (which prevents it from being selected in make config). Then we can work finding a better API. If that fails, then it will need to be completely reverted. To not have the code silently bitrot, still allow building it with COMPILE_TEST. And to prevent the uapi header from being installed, then later changed, and then have an old distro user space see the old version, move the header file out of the uapi directory. Surround the include with CONFIG_COMPILE_TEST to the current location, but when the BROKEN tag is taken off, it will use the uapi directory, and fail to compile. This is a good way to remind us to move the header back. Link: https://lore.kernel.org/all/20220330155835.5e1f6669@gandalf.local.home Link: https://lkml.kernel.org/r/20220330201755.29319-1-mathieu.desnoyers@efficios.com Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-02tracing: Move user_events.h temporarily out of include/uapiSteven Rostedt (Google)
While user_events API is under development and has been marked for broken to not let the API become fixed, move the header file out of the uapi directory. This is to prevent it from being installed, then later changed, and then have an old distro user space update with a new kernel, where applications see the user_events being available, but the old header is in place, and then they get compiled incorrectly. Also, surround the include with CONFIG_COMPILE_TEST to the current location, but when the BROKEN tag is taken off, it will use the uapi directory, and fail to compile. This is a good way to remind us to move the header back. Link: https://lore.kernel.org/all/20220330155835.5e1f6669@gandalf.local.home Link: https://lkml.kernel.org/r/20220330201755.29319-1-mathieu.desnoyers@efficios.com Link: https://lkml.kernel.org/r/20220401143903.188384f3@gandalf.local.home Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-04-02ftrace: Make ftrace_graph_is_dead() a static branchChristophe Leroy
ftrace_graph_is_dead() is used on hot paths, it just reads a variable in memory and is not worth suffering function call constraints. For instance, at entry of prepare_ftrace_return(), inlining it avoids saving prepare_ftrace_return() parameters to stack and restoring them after calling ftrace_graph_is_dead(). While at it using a static branch is even more performant and is rather well adapted considering that the returned value will almost never change. Inline ftrace_graph_is_dead() and replace 'kill_ftrace_graph' bool by a static branch. The performance improvement is noticeable. Link: https://lkml.kernel.org/r/e0411a6a0ed3eafff0ad2bc9cd4b0e202b4617df.1648623570.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-04-02tracing: Set user_events to BROKENSteven Rostedt (Google)
After being merged, user_events become more visible to a wider audience that have concerns with the current API. It is too late to fix this for this release, but instead of a full revert, just mark it as BROKEN (which prevents it from being selected in make config). Then we can work finding a better API. If that fails, then it will need to be completely reverted. Link: https://lore.kernel.org/all/2059213643.196683.1648499088753.JavaMail.zimbra@efficios.com/ Link: https://lkml.kernel.org/r/20220330155835.5e1f6669@gandalf.local.home Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-04-02tracing/user_events: Remove eBPF interfacesBeau Belgrave
Remove eBPF interfaces within user_events to ensure they are fully reviewed. Link: https://lore.kernel.org/all/20220329165718.GA10381@kbox/ Link: https://lkml.kernel.org/r/20220329173051.10087-1-beaub@linux.microsoft.com Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-04-02tracing/user_events: Hold event_mutex during dyn_event_addBeau Belgrave
Make sure the event_mutex is properly held during dyn_event_add call. This is required when adding dynamic events. Link: https://lkml.kernel.org/r/20220328223225.1992-1-beaub@linux.microsoft.com Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-04-02proc: bootconfig: Add null pointer checkLv Ruyi
kzalloc is a memory allocation function which can return NULL when some internal memory errors happen. It is safer to add null pointer check. Link: https://lkml.kernel.org/r/20220329104004.2376879-1-lv.ruyi@zte.com.cn Cc: stable@vger.kernel.org Fixes: c1a3c36017d4 ("proc: bootconfig: Add /proc/bootconfig to show boot config list") Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-04-02tracing: Rename the staging files for trace_eventsSteven Rostedt (Google)
When looking for implementation of different phases of the creation of the TRACE_EVENT() macro, it is pretty useless when all helper macro redefinitions are in files labeled "stageX_defines.h". Rename them to state which phase the files are for. For instance, when looking for the defines that are used to create the event fields, seeing "stage4_event_fields.h" gives the developer a good idea that the defines are in that file. Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-04-02KVM: x86: fix sending PV IPILi RongQing
If apic_id is less than min, and (max - apic_id) is greater than KVM_IPI_CLUSTER_SIZE, then the third check condition is satisfied but the new apic_id does not fit the bitmask. In this case __send_ipi_mask should send the IPI. This is mostly theoretical, but it can happen if the apic_ids on three iterations of the loop are for example 1, KVM_IPI_CLUSTER_SIZE, 0. Fixes: aaffcfd1e82 ("KVM: X86: Implement PV IPIs in linux guest") Signed-off-by: Li RongQing <lirongqing@baidu.com> Message-Id: <1646814944-51801-1-git-send-email-lirongqing@baidu.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-11 00:52:47 +0000