summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-11-10nvme: unexport starting async event workKeith Busch
Async event work is for core use only and should not be called directly from drivers. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: remove handling of multiple AEN requestsKeith Busch
The driver can handle tracking only one AEN request, so this patch removes handling for multiple ones. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme-fc: remove unused "queue_size" fieldKeith Busch
This was being saved in a structure, but never used anywhere. The queue size is obtained through other means, so there's no reason to duplicate this without a user for it. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: centralize AEN definesKeith Busch
All the transports were unnecessarilly duplicating the AEN request accounting. This patch defines everything in one place. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvmet: remove redundant local variableSagi Grimberg
the status is either success or some status id and we don't need a local variable for it. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvmet: remove redundant memset if failed to get_smart_log failedSagi Grimberg
We already allocated the buffer with kzalloc. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10blk-mq: Avoid that request queue removal can trigger list corruptionBart Van Assche
Avoid that removal of a request queue sporadically triggers the following warning: list_del corruption. next->prev should be ffff8807d649b970, but was 6b6b6b6b6b6b6b6b WARNING: CPU: 3 PID: 342 at lib/list_debug.c:56 __list_del_entry_valid+0x92/0xa0 Call Trace: process_one_work+0x11b/0x660 worker_thread+0x3d/0x3b0 kthread+0x129/0x140 ret_from_fork+0x27/0x40 Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: fix eui_show() print formatJavier González
Fix print formatting, but keep the original output to prevent user breakage as suggested by Joe Perches. Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: compare NQN string with right sizeJavier González
Copy subnqns using NVMF_NQN_SIZE as it is < 256 Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10blk-mq: put driver tag if dispatch budget can't be gotMing Lei
We have to put the driver tag if dispatch budget can't be got, otherwise it might cause IO deadlock, especially in case that size of tags is very small. Fixes: de1482974080(blk-mq: introduce .get_budget and .put_budget in blk_mq_ops) Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: pass full fmode_t to blk_verify_commandChristoph Hellwig
Use the obvious calling convention. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: remove __bio_kmap_atomicChristoph Hellwig
This helper doesn't buy us much over calling kmap_atomic directly. In fact in the only caller it does a bit of useless work as the caller already has the bvec at hand, and said caller would even buggy for a multi-segment bio due to the use of this helper. So just remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: kill bio_kmap/kunmap_irq()Jens Axboe
There are no users of it anymore. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10Revert "blk-mq: don't handle TAG_SHARED in restart"Jens Axboe
This reverts commit 358a3a6bccb74da9d63a26b2dd5f09f1e9970e0b. We have cases that aren't covered 100% in the drivers, so for now we have to retain the shared tag restart loops. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10kthread: zero the kthread data structureShaohua Li
kthread() could bail out early before we initialize blkcg_css (if the kthread is killed very early. Please see xchg() statement in kthread()), which confuses free_kthread_struct. Instead of moving the blkcg_css initialization early, we simply zero the whole 'self' data structure, which doesn't sound much overhead. Reported-by: syzbot <syzkaller@googlegroups.com> Fixes: 05e3db95ebfc ("kthread: add a mechanism to store cgroup info") Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Dmitry Vyukov <dvyukov@google.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvmet: fix comment typos in admin-cmd.cMinwoo Im
small typos fixed in admin-cmd.c Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme-rdma: fix nvme_rdma_create_queue_ib error flowMax Gurtovoy
QP object is created using rdma_cm api, therefore the destruction should use the same api for symmetry. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvmet-rdma: update queue list during ib_device removalIsrael Rukshin
A NULL deref happens when nvmet_rdma_remove_one() is called more than once (e.g. while connected via 2 ports). The first call frees the queues related to the first ib_device but doesn't remove them from the queue list. While calling nvmet_rdma_remove_one() for the second ib_device it goes over the full queue list again and we get the NULL deref. Fixes: f1d4ef7d ("nvmet-rdma: register ib_client to not deadlock in device removal") Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grmberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10lpfc: tie in to new dev_loss_tmo interface in nvme transportJames Smart
This patch calls the new nvme transport routine for dev_loss_tmo whenever the SCSI fc transport calls the lldd to make a dynamic change to a remote ports dev_loss_tmo. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme-fc: decouple ns references from lldd referencesJames Smart
In the lldd api, a lldd may unregister a remoteport (loss of connectivity or driver unload) or localport (driver unload). The lldd must wait for the remoteport_delete or localport_delete before completing its actions post the unregister. The xxx_deletes currently occur only when the xxxport structure is fully freed after all references are removed. Thus the lldd may be held hostage until an app or in-kernel entity that has a namespace open finally closes so the namespace can be removed, the controller removed, thus the transport objects, thus the lldd. This patch decouples the transport and os-facing objects from the lldd and the remoteport and localport. There is a point in all deletions where the transport will no longer interact with the lldd on behalf of a controller. That point centers around the association established with the target/subsystem. It will access the lldd whenever it attempts to create an association and while the association is active. New associations may only be created if the remoteport is live (thus the localport is live). It will not access the lldd after deleting the association. Therefore, the patch tracks the count of active controllers - those with associations being created or that are active - on a remoteport. It also tracks the number of remoteports that have active controllers, on a a localport. When a remoteport is unregistered, as soon as there are no active controllers, the lldd's remoteport_delete may be called and the lldd may continue. Similarly, when a localport is unregistered, as soon as there are no remoteports with active controllers, the localport_delete callback may be made. This significantly speeds up unregistration with the lldd. The transport objects continue in suspended status with reconnect timers running, and upon expiration, normal ref-counting will occur and the objects will be freed. The transport object may still be held hostage by the application/kernel module, but that is acceptable. With this change, the lldd may be fully unloaded and reloaded, and if registrations occur prior to the timeouts, the nvme controller and namespaces will resume normally as if a link bounce. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme-fc: fix localport resume using stale valuesJames Smart
The localport resume was not updating the lldd ops structure. If the lldd is unloaded and reloaded, the ops pointers will differ. Additionally, as there are device references taken by the localport, ensure that resume only resumes if the device matches as well. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: check admin passthru command effectsKeith Busch
The NVMe standard provides a command effects log page so the host may be aware of special requirements it may need to do for a particular command. For example, the command may need to run with IO quiesced to prevent timeouts or undefined behavior, or it may change the logical block formats that determine how the host needs to construct future commands. This patch saves the nvme command effects log page if the controller supports it, and performs appropriate actions before and after an admin passthrough command is completed. If the controller does not support the command effects log page, the driver will define the effects for known opcodes. The nvme format and santize are the only commands in this patch with known effects. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: factor get log into a helperKeith Busch
And fix the warning on a successful firmware log. Reviewed-by: Javier González <javier@cnexlabs.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: fix and clarify the check for missing metadataChristoph Hellwig
Update the check in nvme_setup_rw for missing metadata so that it is together with the other metadata handling, does not contain impossible to reach conditions and warns if we get an impossible requests for a (non-PI) metadata-enabled namespace when CONFIG_BLK_DEV_INTEGRITY is not set. Also add a little helper that checks if a given metadata configuration contains protection information Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Javier González <jg@lightnvm.io> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: split __nvme_revalidate_diskChristoph Hellwig
Split out the code that applies the calculate value to a given disk/queue into new helper that can be reused by the multipath code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: set the chunk size before freezing the queueChristoph Hellwig
We don't need a frozen queue to update the chunk_size, which just is a hint, and moving it a little earlier will allow for some better code reuse with the multipath code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: don't pass struct nvme_ns to nvme_config_discardChristoph Hellwig
To allow reusing this function for the multipath node. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: don't pass struct nvme_ns to nvme_init_integrityChristoph Hellwig
To allow reusing this function for the multipath node. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: always unregister the integrity profile in __nvme_revalidate_diskChristoph Hellwig
This is safe because the queue is always frozen when we revalidate, and it simplifies both the existing code as well as the multipath implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10nvme: move the dying queue check from cancel to completionChristoph Hellwig
With multipath we don't want a hard DNR bit on a request that is cancelled by a controller reset, but instead want to be able to retry it on another patch. To archive this don't always set the DNR bit when the queue is dying in nvme_cancel_request, but defer that decision to nvme_req_needs_retry. Note that it applies to any command there and not just cancelled commands, but one the queue is dying that is the right thing to do anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10blktrace: fix unlocked registration of tracepointsJens Axboe
We need to ensure that tracepoints are registered and unregistered with the users of them. The existing atomic count isn't enough for that. Add a lock around the tracepoints, so we serialize access to them. This fixes cases where we have multiple users setting up and tearing down tracepoints, like this: CPU: 0 PID: 2995 Comm: syzkaller857118 Not tainted 4.14.0-rc5-next-20171018+ #36 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1c4/0x1e0 kernel/panic.c:546 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:177 do_trap_no_signal arch/x86/kernel/traps.c:211 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:260 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:297 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:310 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:tracepoint_add_func kernel/tracepoint.c:210 [inline] RIP: 0010:tracepoint_probe_register_prio+0x397/0x9a0 kernel/tracepoint.c:283 RSP: 0018:ffff8801d1d1f6c0 EFLAGS: 00010293 RAX: ffff8801d22e8540 RBX: 00000000ffffffef RCX: ffffffff81710f07 RDX: 0000000000000000 RSI: ffffffff85b679c0 RDI: ffff8801d5f19818 RBP: ffff8801d1d1f7c8 R08: ffffffff81710c10 R09: 0000000000000004 R10: ffff8801d1d1f6b0 R11: 0000000000000003 R12: ffffffff817597f0 R13: 0000000000000000 R14: 00000000ffffffff R15: ffff8801d1d1f7a0 tracepoint_probe_register+0x2a/0x40 kernel/tracepoint.c:304 register_trace_block_rq_insert include/trace/events/block.h:191 [inline] blk_register_tracepoints+0x1e/0x2f0 kernel/trace/blktrace.c:1043 do_blk_trace_setup+0xa10/0xcf0 kernel/trace/blktrace.c:542 blk_trace_setup+0xbd/0x180 kernel/trace/blktrace.c:564 sg_ioctl+0xc71/0x2d90 drivers/scsi/sg.c:1089 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x444339 RSP: 002b:00007ffe05bb5b18 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006d66c0 RCX: 0000000000444339 RDX: 000000002084cf90 RSI: 00000000c0481273 RDI: 0000000000000009 RBP: 0000000000000082 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000206 R12: ffffffffffffffff R13: 00000000c0481273 R14: 0000000000000000 R15: 0000000000000000 since we can now run these in parallel. Ensure that the exported helpers for doing this are grabbing the queue trace mutex. Reported-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10blktrace: fix unlocked access to init/start-stop/teardownJens Axboe
sg.c calls into the blktrace functions without holding the proper queue mutex for doing setup, start/stop, or teardown. Add internal unlocked variants, and export the ones that do the proper locking. Fixes: 6da127ad0918 ("blktrace: Add blktrace ioctls to SCSI generic devices") Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10Merge tag 'ceph-for-4.14-rc9' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph gix from Ilya Dryomov: "Memory allocation flags fix, marked for stable" * tag 'ceph-for-4.14-rc9' of git://github.com/ceph/ceph-client: rbd: use GFP_NOIO for parent stat and data requests
2017-11-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer updates from Dmitry Torokhov: - a new ACPI ID for Elan touchpad found in yet another Ideapad model - Synaptics RMI4 will allow binding to controllers reporting SMB version 3 (note that we are not adding any new ACPI IDs to the Synaptics PS/2 drover so unless user explicitly enables intertouch support there is no user-visible change) - a fixup to TSC 2004/5 touchscreen driver to mark input devices as "direct" to help userspace identify the type of device they are dealing with * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - RMI4 can also use SMBUS version 3 Input: tsc200x-core - set INPUT_PROP_DIRECT Input: elan_i2c - add ELAN060C to the ACPI table
2017-11-10Merge remote-tracking branches 'spi/topic/sh-msiof', 'spi/topic/slave', ↵Mark Brown
'spi/topic/spreadtrum' and 'spi/topic/tegra114' into spi-next
2017-11-10Merge remote-tracking branches 'spi/topic/imx', 'spi/topic/mxs', ↵Mark Brown
'spi/topic/orion', 'spi/topic/rspi' and 'spi/topic/s3c64xx' into spi-next
2017-11-10Merge remote-tracking branches 'spi/topic/armada', 'spi/topic/axi', ↵Mark Brown
'spi/topic/davinci' and 'spi/topic/fsl-dspi' into spi-next
2017-11-10Merge remote-tracking branch 'spi/topic/core' into spi-nextMark Brown
2017-11-10Merge remote-tracking branches 'spi/fix/idr' and 'spi/fix/sh-msiof' into ↵Mark Brown
spi-linus
2017-11-10Merge remote-tracking branches 'regulator/topic/da9211', ↵Mark Brown
'regulator/topic/pfuze100' and 'regulator/topic/tps65218' into regulator-next
2017-11-10Merge remote-tracking branch 'regulator/topic/qcom-spmi' into regulator-nextMark Brown
2017-11-10Merge remote-tracking branch 'regulator/topic/axp20x' into regulator-nextMark Brown
2017-11-10Merge remote-tracking branch 'regulator/fix/qcom-spmi' into regulator-linusMark Brown
2017-11-10spi: imx: Don't require platform data chipselect arrayTrent Piepho
If the array is not present, assume all chip selects are native. This is the standard behavior for SPI masters configured via the device tree and the behavior of this driver as well when it is configured via device tree. This reduces platform data vs DT differences and allows most of the platform data based boards to remove their chip select arrays. CC: Shawn Guo <shawnguo@kernel.org> CC: Sascha Hauer <kernel@pengutronix.de> CC: Fabio Estevam <fabio.estevam@nxp.com> CC: Mark Brown <broonie@kernel.org> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-10spi: imx: Fix failure path leak on GPIO request errorTrent Piepho
If the code that requests any chip select GPIOs fails, the cleanup of spi_bitbang_start() by calling spi_bitbang_stop() is not done. Add this to the failure path. Note that spi_bitbang_start() has to be called before requesting GPIOs because the GPIO data in the spi master is populated when the master is registed, and that doesn't happen until spi_bitbang_start() is called. CC: Shawn Guo <shawnguo@kernel.org> CC: Sascha Hauer <kernel@pengutronix.de> CC: Fabio Estevam <fabio.estevam@nxp.com> CC: Mark Brown <broonie@kernel.org> CC: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-10spi: imx: GPIO based chip selects should not be requiredTrent Piepho
The driver will fail to load if no gpio chip selects are specified, this patch changes this so that it no longer fails. It's possible to use all native chip selects, in which case there is no reason to have a gpio chip select array. This is what happens if the *optional* device tree property "cs-gpios" is omitted. The spi core already checks for the absence of gpio chip selects in the master and assigns any slaves the gpio_cs value of -ENOENT. Also have the driver respect the standard SPI device tree property "num-cs" to allow setting the number of chip selects without using cs-gpios. CC: Mark Brown <broonie@kernel.org> CC: Shawn Guo <shawnguo@kernel.org> CC: Sascha Hauer <kernel@pengutronix.de> CC: Fabio Estevam <fabio.estevam@nxp.com> CC: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-10dm cache: lift common migration preparation code to alloc_migration()Mike Snitzer
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-11-10dm cache: remove usused deferred_cells member from struct cacheJoe Thornber
Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-11-10dm cache policy smq: allocate cache blocks in orderJoe Thornber
Previously, cache blocks were being allocated in reverse order. Fix this by pulling the block off the head of the free list. Shouldn't have any impact on performance or latency but it is more correct to have the cache blocks allocated/mapped in ascending order. This fix will slightly increase the chances of two adjacent oblocks being in adjacent cblocks. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-11-10dm cache policy smq: change max background work from 10240 to 4096 blocksJoe Thornber
10240 blocks was too much, lowering this reduces the latency of copying and consumes less memory. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-11 20:12:19 +0000