summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-06-21[media] em28xx: Add the DRX-K at I2C address 0x29 to the list of known I2C ↵Martin Blumenstingl
devices Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-21[media] Add support for downloading the firmware of the Terratec Cinergy HTC ↵Martin Blumenstingl
Stick HD's firmware As of June 2012 it uses the same firmware as the Hauppauge WinTV HVR 930C. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-21[media] radio-sf16fmi: Use LM7000 driverOndrej Zary
Convert radio-sf16fmi to use generic LM7000 driver. Tested with SF16-FMI, SF16-FMP and SF16-FMD. radio."); @@ -48,37 +50,40 @@ struct fmi bool mute; unsigned long curfreq; /* freq in kHz */ struct mutex lock; + struct lm7000 lm; }; static struct fmi fmi_card; static struct pnp_dev *dev; bool pnp_attached; -/* freq is in 1/16 kHz to internal number, hw precision is 50 kHz */ -/* It is only useful to give freq in interval of 800 (=0.05Mhz), - * other bits will be truncated, e.g 92.7400016 -> 92.7, but - * 92.7400017 -> 92.75 - */ -#define RSF16_ENCODE(x) ((x) / 800 + 214) #define RSF16_MINFREQ (87 * 16000) #define RSF16_MAXFREQ (108 * 16000) -static void outbits(int bits, unsigned int data, int io) +#define FMI_BIT_TUN_CE (1 << 0) +#define FMI_BIT_TUN_CLK (1 << 1) +#define FMI_BIT_TUN_DATA (1 << 2) +#define FMI_BIT_VOL_SW (1 << 3) +#define FMI_BIT_TUN_STRQ (1 << 4) + +void fmi_set_pins(struct lm7000 *lm, u8 pins) { - while (bits--) { - if (data & 1) { - outb(5, io); - udelay(6); - outb(7, io); - udelay(6); - } else { - outb(1, io); - udelay(6); - outb(3, io); - udelay(6); - } - data >>= 1; - } Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-21[media] radio-aimslab: Use LM7000 driverOndrej Zary
Convert radio-aimslab to use generic LM7000 driver. Tested with Reveal RA300. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-21[media] radio: Add Sanyo LM7000 tuner driverOndrej Zary
Add very simple driver for Sanyo LM7000 AM/FM tuner chip. Only FM is supported as there is no known HW with AM implemented. This will be used by radio-aimslab and radio-sf16fmi. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-21[media] em28xx: Make a few drxk_config structs staticEzequiel García
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-21[media] em28xx: Remove unused AC97 register definitionsEzequiel García
There is a specific header sound/ac97_codec.h that defines these. All drivers should use it instead of rolling its own set of macros. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-21[media] em28xx: Rename AC97 registers to use sound/ac97_codec.h definitionsEzequiel García
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-21[media] em28xx: Fix wrong AC97 mic register usageEzequiel García
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-21[media] zr364xx: add suspend/resume supportHans Verkuil
And fix initial control setup. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-21[media] zr364xx: allow multiple opensHans Verkuil
This driver allowed only one open filehandle. This is against the spec, so fix the driver by assigning proper ownership when streaming. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-21[media] zr364xx: add support for control eventsHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-21[media] zr364xx: fix querycap and fill in colorspaceHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-21[media] zr364xx: convert to the control frameworkHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-21[media] zr364xx: introduce v4l2_deviceHans Verkuil
Implement struct v4l2_device: use the core lock and use the v4l2_device release() callback. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-21[media] zr364xx: embed video_device and register it at the end of probeHans Verkuil
Embed the video_device struct instead of allocating it and register it as the last thing in probe(). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-21[media] media: pms.c needs linux/slab.hRandy Dunlap
drivers/media/video/pms.c uses kzalloc() and kfree() so it should include <linux/slab.h> to fix build errors and a warning. drivers/media/video/pms.c:1047:2: error: implicit declaration of function 'kzalloc' drivers/media/video/pms.c:1047:6: warning: assignment makes pointer from integer without a cast drivers/media/video/pms.c:1116:2: error: implicit declaration of function 'kfree' Found in mmotm but applies to mainline. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-21[media] smiapp-core: fix compilation build errorMauro Carvalho Chehab
smiapp-core.c:2472:3: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] V4L2 Spec: fix typo: NTSC -> NRSCHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] V4L2 spec: clarify a few modulator issuesHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] S_HW_FREQ_SEEK: set capability flags and return ENODATA instead of ↵Hans Verkuil
EAGAIN Set the new capability flags in G_TUNER and return ENODATA if no channels were found. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] v4l2 spec: document the new v4l2_tuner capabilitiesHans Verkuil
Update the spec with the new capabilities and specify new error codes for S_HW_FREQ_SEEK. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] videodev2.h: add new hwseek capability bitsHans Verkuil
Tell the application whether the hardware seek is bounded and/or wraps around. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] tvaudio: don't report mono when stereo is receivedDaniel Glöckner
The V4L2 spec says reporting mono and stereo at the same time means the hardware can not distinguish between the two. So when we can, we should report only one of them. Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] tvaudio: support V4L2_TUNER_MODE_LANG1_LANG2Daniel Glöckner
Many of the audio decoders handled by the driver support this mode, so the driver should support it as well. Coding style errors are done to blend into the surrounding code. Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] tvaudio: obey V4L2 tuner audio matrixDaniel Glöckner
V4L2 specifies the audio mode to use for combinations of possible (rxsubchans) and requested (audmode) audio modes. Up to now tvaudio has made these decisions automatically based on the possible audio modes from setting of the frequency until VIDIOC_S_TUNER was called. It then forced the hardware to use the mode requested by the user. With this patch it continues to adjust the audio mode while taking the requested mode into account. Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] tvaudio: use V4L2_TUNER_SUB_* for bitfieldsDaniel Glöckner
The V4L2_TUNER_MODE_* constants are not suited for use in bitfields. Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] tvaudio: don't use thread for TA8874ZDaniel Glöckner
Judging from the data sheet it will automatically switch to the next best audio mode in accordance with the V4L2 tuner audio matrix. Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] tvaudio: remove watch_stereoDaniel Glöckner
It is never read and only assigned 0. Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] tvaudio: use V4L2_TUNER_MODE_SAP for TDA985x SAPDaniel Glöckner
As V4L2_TUNER_MODE_SAP == V4L2_TUNER_MODE_LANG2, we make V4L2_TUNER_MODE_LANG1 equal to V4L2_TUNER_MODE_STEREO. Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] tvaudio: fix tda8425_setmodeDaniel Glöckner
The passed audio mode is not a bitfield. Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] tvaudio: fix TDA9873 constantsDaniel Glöckner
These constants were unused so far but need | instead of &. Signed-off-by: Daniel Glöckner <daniel-gl@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] pms: fix build error in pms_probe()Fengguang Wu
Fix a compiler breakage introduced by commit 8173090acb33: drivers/media/video/pms.c: In function ‘pms_probe’: drivers/media/video/pms.c:1047:2: error: implicit declaration of function ‘kzalloc’ [-Werror=implicit-function-declaration] drivers/media/video/pms.c:1116:2: error: implicit declaration of function ‘kfree’ [-Werror=implicit-function-declaration] Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] saa7146: Variable set but not usedPeter Senna Tschudin
In function fops_open variable type was set but not used. Tested by compilation only. Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Michael Hunold <michael@mihu.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] em28xx: Make em28xx_ir_change_protocol a static functionEzequiel García
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] staging: solo6x10: fix | vs &Dan Carpenter
The test here is never true because '&' was used instead of '|'. It was the same as: if (status & ((1<<16) & (1<<17)) ... Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] videobuf2: correct the #ifndef text mistake in videobuf2-dma-contig.hAlbert Wang
It should be a mistake due to copy & paste in header file Correct it in videobuf2-dma-config.h for avoiding duplicate include it Change-Id: I1f71fcec2889c033c7db380c58d9a1369c5afb35 Signed-off-by: Albert Wang <twang13@marvell.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] smia: Fix compile failuresAlan Cox
Fix compile of smia code. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=43337 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] Fix VIDIOC_DQEVENT docbook entryHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] s5p-fimc: Fix control creation functionKamil Debski
Fixed the size of the V4L2_CID_COLORFX control cluster. Prior to this fix V4L2_CID_ROTATE was also icluded in the cluster preventing application from enabling rotation. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] s5p-mfc: Fix checkpatch error in s5p_mfc_shm.h fileSachin Kamat
Fixes the following error: ERROR: open brace '{' following enum go on the same line +enum MFC_SHM_OFS +{ Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] s5p-mfc: Fix setting controlsKamil Debski
Fixed s_ctrl function when setting the following controls: - V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER - V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] v4l/s5p-mfc: added image size align in VIDIOC_TRY_FMTAndrzej Hajda
Image size for MFC encoder should have size between 8x4 and 1920x1080 with even width and height. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] v4l/s5p-mfc: corrected encoder v4l control definitionsAndrzej Hajda
Patch corrects definition of H264 level control and changes bare numbers to enums in two other cases. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] v4l: mem2mem_testdev: Fix race conditions in driverTomasz Moń
The mem2mem_testdev allows multiple instances to be opened in parallel. Source and destination queue data are being shared between all instances, which can lead to kernel oops due to race conditions (most likely to happen inside device_run()). Attached patch fixes mentioned problem by storing queue data per device context. Signed-off-by: Tomasz Moń <desowin@gmail.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] s5p-mfc: Bug fix of timestamp/timecode copy mechanismKamil Debski
Fixed the code copying timecode/timestamp to corresponding frames between OUTPUT and CAPTURE. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] lirc_sir: make device registration workJarod Wilson
For one, the driver device pointer needs to be filled in, or the lirc core will refuse to load the driver. And we really need to wire up all the platform_device bits. This has been tested via the lirc sourceforge tree and verified to work, been sitting there for months, finally getting around to sending it. :\ CC: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] DVB: stb0899: speed up getting BER valuesKlaus Schmidinger
stb0899_read_ber() takes 500ms (half a second!) to deliver the current BER value. Apparently it takes 5 subsequent readings, with a 100ms pause between them (and even before the first one). This is a real performance brake if an application freqeuently reads the BER of several devices. The attached patch reduces this to a single reading, with no more pausing. I didn't observe any negative side effects of this change. Signed-off-by: Klaus Schmidinger <Klaus.Schmidinger@tvdr.de> Cc: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] media: video: bt8xx: Remove duplicated pixel format entryvolokh
Signed-off-by: Volokh Konstantin <volokh84@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-18[media] cxd2820r: Fix an incorrect modulation type bitmaskJanne Huttunen
Fix an incorrect modulation type bitmask. This allows QAM256 also to be correctly reported. Signed-off-by: Janne Huttunen <jahuttun@gmail.com> Acked-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-28 22:50:06 +0000