| Age | Commit message (Collapse) | Author |
|---|
|
The upcoming nested virtualization can share g-stage page table
management with the current host g-stage implementation hence
factor-out g-stage page table management as separate sources
and also use "kvm_riscv_mmu_" prefix for host g-stage functions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250618113532.471448-12-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Currently, the struct kvm_riscv_hfence does not have vmid field
and various hfence processing functions always pick vmid assigned
to the guest/VM. This prevents us from doing hfence operation on
arbitrary vmid hence add vmid field to struct kvm_riscv_hfence
and use it wherever applicable.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250618113532.471448-11-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Introduce struct kvm_gstage_mapping which represents a g-stage
mapping at a particular g-stage page table level. Also, update
the kvm_riscv_gstage_map() to return the g-stage mapping upon
success.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250618113532.471448-10-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The MMU, TLB, and VMID management for KVM RISC-V already exists as
seprate sources so create separate headers along these lines. This
further simplifies asm/kvm_host.h header.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250618113532.471448-9-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The H-extension CSRs accessed by kvm_riscv_vcpu_trap_redirect() will
trap when KVM RISC-V is running as Guest/VM hence remove these traps
by using ncsr_xyz() instead of csr_xyz().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250618113532.471448-8-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The kvm_arch_flush_remote_tlbs_range() expected by KVM core can be
easily implemented for RISC-V using kvm_riscv_hfence_gvma_vmid_gpa()
hence provide it.
Also with kvm_arch_flush_remote_tlbs_range() available for RISC-V, the
mmu_wp_memory_region() can happily use kvm_flush_remote_tlbs_memslot()
instead of kvm_flush_remote_tlbs().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250618113532.471448-7-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The gstage_set_pte() and gstage_op_pte() should flush TLB only when
a leaf PTE changes so that unnecessary TLB flushes can be avoided.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250618113532.471448-6-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM_REQ_HFENCE_GVMA_VMID_ALL is same as KVM_REQ_TLB_FLUSH so
to avoid confusion let's replace KVM_REQ_HFENCE_GVMA_VMID_ALL with
KVM_REQ_TLB_FLUSH. Also, rename kvm_riscv_hfence_gvma_vmid_all_process()
to kvm_riscv_tlb_flush_process().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250618113532.471448-5-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The kvm_riscv_local_tlb_sanitize() deals with sanitizing current
VMID related TLB mappings when a VCPU is moved from one host CPU
to another.
Let's move kvm_riscv_local_tlb_sanitize() to VMID management
sources and rename it to kvm_riscv_gstage_vmid_sanitize().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250618113532.471448-4-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The kvm_riscv_vcpu_aia_init() does not return any failure so drop
the return value which is always zero.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250618113532.471448-3-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The kvm_riscv_vcpu_alloc_vector_context() does return an error code
upon failure so don't ignore this in kvm_arch_vcpu_create().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250618113532.471448-2-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull rpc_pipefs updates from Al Viro:
"Massage rpc_pipefs to use saner primitives and clean up the APIs
provided to the rest of the kernel"
* tag 'pull-rpc_pipefs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
rpc_create_client_dir(): return 0 or -E...
rpc_create_client_dir(): don't bother with rpc_populate()
rpc_new_dir(): the last argument is always NULL
rpc_pipe: expand the calls of rpc_mkdir_populate()
rpc_gssd_dummy_populate(): don't bother with rpc_populate()
rpc_mkpipe_dentry(): switch to simple_start_creating()
rpc_pipe: saner primitive for creating regular files
rpc_pipe: saner primitive for creating subdirectories
rpc_pipe: don't overdo directory locking
rpc_mkpipe_dentry(): saner calling conventions
rpc_unlink(): saner calling conventions
rpc_populate(): lift cleanup into callers
rpc_unlink(): use simple_recursive_removal()
rpc_{rmdir_,}depopulate(): use simple_recursive_removal() instead
rpc_pipe: clean failure exits in fill_super
new helper: simple_start_creating()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull simple_recursive_removal() update from Al Viro:
"Removing subtrees of kernel filesystems is done in quite a few places;
unfortunately, it's easy to get wrong. A number of open-coded attempts
are out there, with varying amount of bogosities.
simple_recursive_removal() had been introduced for doing that with all
precautions needed; it does an equivalent of rm -rf, with sufficient
locking, eviction of anything mounted on top of the subtree, etc.
This series converts a bunch of open-coded instances to using that"
* tag 'pull-simple_recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
functionfs, gadgetfs: use simple_recursive_removal()
kill binderfs_remove_file()
fuse_ctl: use simple_recursive_removal()
pstore: switch to locked_recursive_removal()
binfmt_misc: switch to locked_recursive_removal()
spufs: switch to locked_recursive_removal()
add locked_recursive_removal()
better lockdep annotations for simple_recursive_removal()
simple_recursive_removal(): saner interaction with fsnotify
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dentry d_flags updates from Al Viro:
"The current exclusion rules for dentry->d_flags stores are rather
unpleasant. The basic rules are simple:
- stores to dentry->d_flags are OK under dentry->d_lock
- stores to dentry->d_flags are OK in the dentry constructor, before
becomes potentially visible to other threads
Unfortunately, there's a couple of exceptions to that, and that's
where the headache comes from.
The main PITA comes from d_set_d_op(); that primitive sets ->d_op of
dentry and adjusts the flags that correspond to presence of individual
methods. It's very easy to misuse; existing uses _are_ safe, but proof
of correctness is brittle.
Use in __d_alloc() is safe (we are within a constructor), but we might
as well precalculate the initial value of 'd_flags' when we set the
default ->d_op for given superblock and set 'd_flags' directly instead
of messing with that helper.
The reasons why other uses are safe are bloody convoluted; I'm not
going to reproduce it here. See [1] for gory details, if you care. The
critical part is using d_set_d_op() only just prior to
d_splice_alias(), which makes a combination of d_splice_alias() with
setting ->d_op, etc a natural replacement primitive.
Better yet, if we go that way, it's easy to take setting ->d_op and
modifying 'd_flags' under ->d_lock, which eliminates the headache as
far as 'd_flags' exclusion rules are concerned. Other exceptions are
minor and easy to deal with.
What this series does:
- d_set_d_op() is no longer available; instead a new primitive
(d_splice_alias_ops()) is provided, equivalent to combination of
d_set_d_op() and d_splice_alias().
- new field of struct super_block - 's_d_flags'. This sets the
default value of 'd_flags' to be used when allocating dentries on
this filesystem.
- new primitive for setting 's_d_op': set_default_d_op(). This
replaces stores to 's_d_op' at mount time.
All in-tree filesystems converted; out-of-tree ones will get caught
by the compiler ('s_d_op' is renamed, so stores to it will be
caught). 's_d_flags' is set by the same primitive to match the
's_d_op'.
- a lot of filesystems had sb->s_d_op->d_delete equal to
always_delete_dentry; that is equivalent to setting
DCACHE_DONTCACHE in 'd_flags', so such filesystems can bloody well
set that bit in 's_d_flags' and drop 'd_delete()' from
dentry_operations.
In quite a few cases that results in empty dentry_operations, which
means that we can get rid of those.
- kill simple_dentry_operations - not needed anymore
- massage d_alloc_parallel() to get rid of the other exception wrt
'd_flags' stores - we can set DCACHE_PAR_LOOKUP as soon as we
allocate the new dentry; no need to delay that until we commit to
using the sucker.
As the result, 'd_flags' stores are all either under ->d_lock or done
before the dentry becomes visible in any shared data structures"
Link: https://lore.kernel.org/all/20250224010624.GT1977892@ZenIV/ [1]
* tag 'pull-dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (21 commits)
configfs: use DCACHE_DONTCACHE
debugfs: use DCACHE_DONTCACHE
efivarfs: use DCACHE_DONTCACHE instead of always_delete_dentry()
9p: don't bother with always_delete_dentry
ramfs, hugetlbfs, mqueue: set DCACHE_DONTCACHE
kill simple_dentry_operations
devpts, sunrpc, hostfs: don't bother with ->d_op
shmem: no dentry retention past the refcount reaching zero
d_alloc_parallel(): set DCACHE_PAR_LOOKUP earlier
make d_set_d_op() static
simple_lookup(): just set DCACHE_DONTCACHE
tracefs: Add d_delete to remove negative dentries
set_default_d_op(): calculate the matching value for ->d_flags
correct the set of flags forbidden at d_set_d_op() time
split d_flags calculation out of d_set_d_op()
new helper: set_default_d_op()
fuse: no need for special dentry_operations for root dentry
switch procfs from d_set_d_op() to d_splice_alias_ops()
new helper: d_splice_alias_ops()
procfs: kill ->proc_dops
...
|
|
The most unlikely watched permission event is FAN_ACCESS_PERM, because
at the time that it was introduced there were no evictable ignore mark,
so subscribing to FAN_ACCESS_PERM would have incured a very high
overhead.
Yet, when we set the fmode to FMODE_NOTIFY_HSM(), we never skip trying
to send FAN_ACCESS_PERM, which is almost always a waste of cycles.
We got to this logic because of bundling FAN_OPEN*_PERM and
FAN_ACCESS_PERM in the same category and because FAN_OPEN_PERM is a
commonly used event.
By open coding fsnotify_open_perm() in fsnotify_open_perm_and_set_mode(),
we no longer need to regard FAN_OPEN*_PERM when calculating fmode.
This leaves the case of having pre-content events and not having any
other permission event in the object masks a more likely case than the
other way around.
Rework the fmode macros and code so that their meaning now refers only
to hooks on an already open file:
- FMODE_NOTIFY_NONE() skip all events
- FMODE_NOTIFY_ACCESS_PERM() send all permission events including
FAN_ACCESS_PERM
- FMODE_NOTIFY_HSM() send pre-content permission events
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250708143641.418603-3-amir73il@gmail.com
|
|
Create helper fsnotify_open_perm_and_set_mode() that moves the
fsnotify_open_perm() hook into file_set_fsnotify_mode_from_watchers().
This will allow some more optimizations.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250708143641.418603-2-amir73il@gmail.com
|
|
samples/fanotify/fs-monitor.c:22:9: error: unknown type name '__s32'
22 | __s32 error;
| ^~~~~
samples/fanotify/fs-monitor.c:23:9: error: unknown type name '__u32'
23 | __u32 error_count;
| ^~~~~
samples/fanotify/fs-monitor.c: In function 'handle_notifications':
samples/fanotify/fs-monitor.c:98:50: error: 'fsid_t' has no member named 'val';
did you mean '__val'?
98 | fid->fsid.val[0],
fid->fsid.val[1]);
| ^~~
| __val
samples/fanotify/fs-monitor.c:98:68: error: 'fsid_t' has no member named 'val';
did you mean '__val'?
98 | fid->fsid.val[0],
fid->fsid.val[1]);
| ^~~
| __val
This is due to sys/fanotify.h on musl does not include
linux/fanotify.h[0] unlike glibc which includes it. This also results in
fsid not being of type __kernel_fsid_t, rather the libc's definition of
it which does not have val, but instead __val.
[0]: https://git.musl-libc.org/cgit/musl/tree/include/sys/fanotify.h
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250630103011.27484-1-listout@listout.xyz
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull asm/param cleanup from Al Viro:
"This massages asm/param.h to simpler and more uniform shape:
- all arch/*/include/uapi/asm/param.h are either generated includes
of <asm-generic/param.h> or a #define or two followed by such
include
- no arch/*/include/asm/param.h anywhere, generated or not
- include <asm/param.h> resolves to arch/*/include/uapi/asm/param.h
of the architecture in question (or that of host in case of uml)
- include/asm-generic/param.h pulls uapi/asm-generic/param.h and
deals with USER_HZ, CLOCKS_PER_SEC and with HZ redefinition after
that"
* tag 'pull-headers_param' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
loongarch, um, xtensa: get rid of generated arch/$ARCH/include/asm/param.h
alpha: regularize the situation with asm/param.h
xtensa: get rid uapi/asm/param.h
|
|
Pull nfsd updates from Chuck Lever:
"NFSD is finally able to offer write delegations to clients that open
files with O_WRONLY, thanks to patches from Dai Ngo. We're expecting
this to accelerate a few interesting corner cases.
The cap on the number of operations per NFSv4 COMPOUND has been
lifted. Now, clients that send COMPOUNDs containing dozens of
operations (for example, a long stream of LOOKUP operations to walk a
pathname in a single round trip) will no longer be rejected.
This release re-enables the ability for NFSD to perform NFSv4.2 COPY
operations asynchronously. This feature has been disabled to mitigate
the risk of denial-of-service when too many such requests arrive.
Many thanks to the contributors, reviewers, testers, and bug reporters
who participated during the v6.17 development cycle"
* tag 'nfsd-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (32 commits)
nfsd: Drop dprintk in blocklayout xdr functions
sunrpc: make svc_tcp_sendmsg() take a signed sentp pointer
sunrpc: rearrange struct svc_rqst for fewer cachelines
sunrpc: return better error in svcauth_gss_accept() on alloc failure
sunrpc: reset rq_accept_statp when starting a new RPC
sunrpc: remove SVC_SYSERR
sunrpc: fix handling of unknown auth status codes
NFSD: Simplify struct knfsd_fh
NFSD: Access a knfsd_fh's fsid by pointer
Revert "NFSD: Force all NFSv4.2 COPY requests to be synchronous"
NFSD: Avoid multiple -Wflex-array-member-not-at-end warnings
NFSD: Use vfs_iocb_iter_write()
NFSD: Use vfs_iocb_iter_read()
NFSD: Clean up kdoc for nfsd_open_local_fh()
NFSD: Clean up kdoc for nfsd_file_put_local()
NFSD: Remove definition for trace_nfsd_ctl_maxconn
NFSD: Remove definition for trace_nfsd_file_gc_recent
NFSD: Remove definitions for unused trace_nfsd_file_lru trace points
NFSD: Remove definition for trace_nfsd_file_unhash_and_queue
nfsd: Use correct error code when decoding extents
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Prevent cluster nodes from trying to recover their own filesystems
during a withdraw
- Add two missing migrate_folio aops and an additional exhash directory
consistency check (both triggered by syzbot bug reports)
- Sanitize how dlm results are processed and clean up a few quirks in
the glock code
- Minor stuff: Get rid of the GIF_ALLOC_FAILED flag; use SECTOR_SIZE
and SECTOR_SHIFT
* tag 'gfs2-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: No more self recovery
gfs2: Validate i_depth for exhash directories
gfs2: Set .migrate_folio in gfs2_{rgrp,meta}_aops
gfs2: a minor finish_xmote cleanup
gfs2: simplify finish_xmote
gfs2: sanitize the gdlm_ast -> finish_xmote interface
gfs2: Minor do_xmote cancelation fix
gfs2: Remove GIF_ALLOC_FAILED flag
gfs2: Use SECTOR_SIZE and SECTOR_SHIFT
|
|
Pull xfs updates from Carlos Maiolino:
"This doesn't contain any new features. It mostly is a collection of
clean ups and code refactoring that I preferred to postpone to the
merge window.
It includes removal of several unused tracepoints, refactoring key
comparing routines under the B-Trees management and cleanup of xfs
journaling code"
* tag 'xfs-merge-6.17' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (44 commits)
xfs: don't use a xfs_log_iovec for ri_buf in log recovery
xfs: don't use a xfs_log_iovec for attr_item names and values
xfs: use better names for size members in xfs_log_vec
xfs: cleanup the ordered item logic in xlog_cil_insert_format_items
xfs: don't pass the old lv to xfs_cil_prepare_item
xfs: remove unused trace event xfs_reflink_cow_enospc
xfs: remove unused trace event xfs_discard_rtrelax
xfs: remove unused trace event xfs_log_cil_return
xfs: remove unused trace event xfs_dqreclaim_dirty
fs/xfs: replace strncpy with memtostr_pad()
xfs: Remove unused label in xfs_dax_notify_dev_failure
xfs: improve the comments in xfs_select_zone_nowait
xfs: improve the comments in xfs_max_open_zones
xfs: stop passing an inode to the zone space reservation helpers
xfs: rename oz_write_pointer to oz_allocated
xfs: use a uint32_t to cache i_used_blocks in xfs_init_zone
xfs: improve the xg_active_ref check in xfs_group_free
xfs: remove the xlog_ticket_t typedef
xfs: remove xrep_trans_{alloc,cancel}_hook_dummy
xfs: return the allocated transaction from xchk_trans_alloc_empty
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"We now support metadata compression. It can be useful for embedded use
cases or archiving a large number of small files.
Additionally, readdir performance has been improved by enabling
readahead (note that it was already common practice for ext3/4 non-dx
and f2fs directories). We may consider further improvements later to
align with ext4's s_inode_readahead_blks behavior for slow devices
too.
The remaining commits are minor.
Summary:
- Add support for metadata compression
- Enable readahead for directories to improve readdir performance
- Minor fixes and cleanups"
* tag 'erofs-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: support to readahead dirent blocks in erofs_readdir()
erofs: implement metadata compression
erofs: add on-disk definition for metadata compression
erofs: fix build error with CONFIG_EROFS_FS_ZIP_ACCEL=y
erofs: remove ENOATTR definition
erofs: refine erofs_iomap_begin()
erofs: unify meta buffers in z_erofs_fill_inode()
erofs: remove need_kmap in erofs_read_metabuf()
erofs: do sanity check on m->type in z_erofs_load_compact_lcluster()
erofs: get rid of {get,put}_page() for ztailpacking data
|
|
https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
"Added:
- sanity check for file name
- mark live inode as bad and avoid any operations
Fixed:
- handling of symlinks created in windows
- creation of symlinks for relative path
Changed:
- cancel setting inode as bad after removing name fails
- revert 'replace inode_trylock with inode_lock'"
* tag 'ntfs3_for_6.17' of https://github.com/Paragon-Software-Group/linux-ntfs3:
Revert "fs/ntfs3: Replace inode_trylock with inode_lock"
fs/ntfs3: Exclude call make_bad_inode for live nodes.
fs/ntfs3: cancle set bad inode after removing name fails
fs/ntfs3: Add sanity check for file name
fs/ntfs3: correctly create symlink for relative path
fs/ntfs3: fix symlinks cannot be handled correctly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"A number of usability and feature updates, scattered performance
improvements and fixes. Highlight of the core changes is getting
closer to enabling large folios (now behind a config option).
User visible changes:
- update defrag ioctl, add new flag to request no compression on
existing extents
- restrict writes to block devices after mount
- in experimental config, enable large folios for data, almost
complete but not widely tested
- add stats tracking duration of critical section in transaction
commit to /sys/fs/btrfs/FSID/commit_stats
Performance improvements:
- caching of lookup results of free space bitmap (20% runtime
improvement on an empty file creation benchmark)
- accessors to metadata (b-tree items) simplified and optimized,
minor improvement in metadata-heavy workloads
- readahead on compressed data improves sequential read
- the xarray for extent buffers is indexed by denser keys, leading to
better packing of the nodes (50-70% reduction of leaf nodes)
Notable fixes:
- stricter compression mount option parsing
- send properly emits fallocate command for file holes when protocol
v2 is used
- fix overallocation of chunks with mount option 'ssd_spread', due to
interaction with size classes not finding the right chunk
(workaround: manual reclaim by 'usage' balance filter)
- various quota enable/disable races with rescan, more verbose
notifications about inconsistent state
- populate otime in tree-log during log replay
- handle ENOSPC when NOCOW file is used with mmap()
Core:
- large data folios enabled in experimental config
- improved error handling, transaction abort call sites
- in zoned mode, allocate reloc block group on mount to make sure
there's always one available for zone reclaim under heavy load
- rework device opening, they're always open as read-only and delayed
until the super block is created, allowing the restricted writes
after mount
- preparatory work for adding blk_holder_ops, allowing device
freeze/thaw in the future
Cleanups, refactoring:
- type and naming unifications (int/bool, return variables)
- rb-tree helper refactoring and simplifications
- reorder memory allocations to less critical places
- RCU string (used for device name) refactoring and API removal
- replace all remaining use of strcpy()"
* tag 'for-6.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (209 commits)
btrfs: send: use fallocate for hole punching with send stream v2
btrfs: unfold transaction aborts when writing dirty block groups
btrfs: use saner variable type and name to indicate extrefs at add_inode_ref()
btrfs: don't skip remaining extrefs if dir not found during log replay
btrfs: don't ignore inode missing when replaying log tree
btrfs: enable large data folios for data reloc inode
btrfs: output more info when btrfs_subpage_assert() failed
btrfs: reloc: unconditionally invalidate the page cache for each cluster
btrfs: defrag: add flag to force no-compression
btrfs: fix ssd_spread overallocation
btrfs: zoned: requeue to unused block group list if zone finish failed
btrfs: zoned: do not remove unwritten non-data block group
btrfs: remove btrfs_clear_extent_bits()
btrfs: use cached state when falling back from NOCoW write to CoW write
btrfs: set EXTENT_NORESERVE before range unlock in btrfs_truncate_block()
btrfs: don't print relocation messages from auto reclaim
btrfs: remove redundant auto reclaim log message
btrfs: make btrfs_check_nocow_lock() check more than one extent
btrfs: assert we can NOCOW the range in btrfs_truncate_block()
btrfs: update function comment for btrfs_check_nocow_lock()
...
|
|
VDISR_EL2 and VSESR_EL2 are now visible to userspace for nested VMs. Add
them to get-reg-list.
Link: https://lore.kernel.org/r/20250728152603.2823699-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/vgic-v4-ctl:
: Userspace control of nASSGIcap, courtesy of Raghavendra Rao Ananta
:
: Allow userspace to decide if support for SGIs without an active state is
: advertised to the guest, allowing VMs from GICv3-only hardware to be
: migrated to to GICv4.1 capable machines.
Documentation: KVM: arm64: Describe VGICv3 registers writable pre-init
KVM: arm64: selftests: Add test for nASSGIcap attribute
KVM: arm64: vgic-v3: Allow userspace to write GICD_TYPER2.nASSGIcap
KVM: arm64: vgic-v3: Allow access to GICD_IIDR prior to initialization
KVM: arm64: vgic-v3: Consolidate MAINT_IRQ handling
KVM: arm64: Disambiguate support for vSGIs v. vLPIs
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
It's more flexible to have a get_viommu_size op. Replace static vsmmu_size
and vsmmu_type with that.
Link: https://patch.msgid.link/r/20250724221002.1883034-3-nicolinc@nvidia.com
Suggested-by: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When viommu type is IOMMU_VIOMMU_TYPE_ARM_SMMUV3, always return or init the
standard struct arm_vsmmu, instead of going through impl_ops that must have
its own viommu type than the standard IOMMU_VIOMMU_TYPE_ARM_SMMUV3.
Given that arm_vsmmu_init() is called after arm_smmu_get_viommu_size(), any
unsupported viommu->type must be a corruption. And it must be a driver bug
that its vsmmu_size and vsmmu_init ops aren't paired. Warn these two cases.
Link: https://patch.msgid.link/r/20250724221002.1883034-2-nicolinc@nvidia.com
Suggested-by: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
* kvm-arm64/el2-reg-visibility:
: Fixes to EL2 register visibility, courtesy of Marc Zyngier
:
: - Expose EL2 VGICv3 registers via the VGIC attributes accessor, not the
: KVM_{GET,SET}_ONE_REG ioctls
:
: - Condition visibility of FGT registers on the presence of FEAT_FGT in
: the VM
KVM: arm64: selftest: vgic-v3: Add basic GICv3 sysreg userspace access test
KVM: arm64: Enforce the sorting of the GICv3 system register table
KVM: arm64: Clarify the check for reset callback in check_sysreg_table()
KVM: arm64: vgic-v3: Fix ordering of ICH_HCR_EL2
KVM: arm64: Document registers exposed via KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS
KVM: arm64: selftests: get-reg-list: Add base EL2 registers
KVM: arm64: selftests: get-reg-list: Simplify feature dependency
KVM: arm64: Advertise FGT2 registers to userspace
KVM: arm64: Condition FGT registers on feature availability
KVM: arm64: Expose GICv3 EL2 registers via KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS
KVM: arm64: Let GICv3 save/restore honor visibility attribute
KVM: arm64: Define helper for ICH_VTR_EL2
KVM: arm64: Define constant value for ICC_SRE_EL2
KVM: arm64: Don't advertise ICH_*_EL2 registers through GET_ONE_REG
KVM: arm64: Make RVBAR_EL2 accesses UNDEF
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/config-masks:
: More config-driven mask computation, courtesy of Marc Zyngier
:
: Converts more system registers to the config-driven computation of RESx
: masks based on the advertised feature set
KVM: arm64: Tighten the definition of FEAT_PMUv3p9
KVM: arm64: Convert MDCR_EL2 to config-driven sanitisation
KVM: arm64: Convert SCTLR_EL1 to config-driven sanitisation
KVM: arm64: Convert TCR2_EL2 to config-driven sanitisation
arm64: sysreg: Add THE/ASID2 controls to TCR2_ELx
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Steal string reference from @param->string rather than duplicating it.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Steal string reference from @param->string rather than duplicating it.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Steal string reference from @param->string rather than duplicating it.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Steal string reference from @param->string rather than duplicating it.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Steal string reference from @param->string rather than duplicating it.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Argument 'p' of reactors_show() and monitor_reactor_show() is not a pointer
to struct rv_reactor, it is actually a pointer to the list_head inside
struct rv_reactor. Therefore it's wrong to cast 'p' to struct rv_reactor *.
This wrong type cast has been there since the beginning. But it still
worked because the list_head was the first field in struct rv_reactor_def.
This is no longer true since commit 3d3c376118b5 ("rv: Merge struct
rv_reactor_def into struct rv_reactor") moved the list_head, and this wrong
type cast became a functional problem.
Properly use container_of() instead.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/b4febbd6844311209e4c8768b65d508b81bd8c9b.1753625621.git.namcao@linutronix.de
Fixes: 3d3c376118b5 ("rv: Merge struct rv_reactor_def into struct rv_reactor")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Argument 'p' of monitors_show() is not a pointer to struct rv_monitor, it
is actually a pointer to the list_head inside struct rv_monitor. Therefore
it is wrong to cast 'p' to struct rv_monitor *.
This wrong type cast has been there since the beginning. But it still
worked because the list_head was the first field in struct rv_monitor_def.
This is no longer true since commit 24cbfe18d55a ("rv: Merge struct
rv_monitor_def into struct rv_monitor") moved the list_head, and this wrong
type cast became a functional problem.
Properly use container_of() instead.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/35e49e97696007919ceacf73796487a2e15a3d02.1753625621.git.namcao@linutronix.de
Fixes: 24cbfe18d55a ("rv: Merge struct rv_monitor_def into struct rv_monitor")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Note that kernel.h is discouraged to be included as it's written
at the top of that file.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Before commit df6d7277e552 ("i2c: core: Do not dereference fwnode in struct
device"), i2c_unregister_device() only called fwnode_handle_put() on
of_node-s in the form of calling of_node_put(client->dev.of_node).
But after this commit the i2c_client's fwnode now unconditionally gets
fwnode_handle_put() on it.
When the i2c_client has no primary (ACPI / OF) fwnode but it does have
a software fwnode, the software-node will be the primary node and
fwnode_handle_put() will put() it.
But for the software fwnode device_remove_software_node() will also put()
it leading to a double free:
[ 82.665598] ------------[ cut here ]------------
[ 82.665609] refcount_t: underflow; use-after-free.
[ 82.665808] WARNING: CPU: 3 PID: 1502 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x11
...
[ 82.666830] RIP: 0010:refcount_warn_saturate+0xba/0x110
...
[ 82.666962] <TASK>
[ 82.666971] i2c_unregister_device+0x60/0x90
Fix this by not calling fwnode_handle_put() when the primary fwnode is
a software-node.
Fixes: df6d7277e552 ("i2c: core: Do not dereference fwnode in struct device")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.17, part 1
Cleanups and refactorings:
- lpi2c, riic, st, stm32f7: general improvements
- riic: support more flexible IRQ configurations
- tegra: fix documentation
Improvements:
- lpi2c: improve register polling and add atomic transfer
- imx: use guarded spinlocks
New hardware support:
- Samsung Exynos 2200
- Renesas RZ/T2H (R9A09G077), RZ/N2H (R9A09G087)
DT binding:
- rk3x: enable power domains
- nxp: support clock property
|
|
Restricted pointers ("%pK") are not meant to be used through printk().
It can unintentionally expose security sensitive, raw pointer values.
Use regular pointer formatting instead.
Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
I am switching my address to a personal domain, so some files in the
SGI IP30 and IOC3 files need to be updated. I will send updates for
the MAINTAINERS file and rtc-ds1685 separately to linux-rtc.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The name should match the pattern defined in the mmc-controller binding.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507220336.JhvVLL7k-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202507220215.wVoUMK5B-lkp@intel.com/
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
remaining chips
Previous commit missed two other places that need converting, it only
came out in tests on autobuilders now. Convert the rest of the driver.
Fixes: 68bdc4dc1130 ("MIPS: alchemy: gpio: use new line value setter callbacks")
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://lore.kernel.org/r/20250727082442.13182-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Resolve overlapping context conflict between this upstream fix:
d8010d4ba43e ("x86/bugs: Add a Transient Scheduler Attacks mitigation")
And this pending commit in tip:x86/cpu:
65f55a301766 ("x86/CPU/AMD: Add CPUID faulting support")
Conflicts:
arch/x86/kernel/cpu/amd.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Emails to alexandru.tachici@analog.com bounce permanently:
Remote Server returned '550 5.1.10 RESOLVER.ADR.RecipientNotFound; Recipient not found by SMTP address lookup'
so replace him with Cedric Encarnacion from Analog.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250724113735.59148-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for the Texas Instruments INA228 Ultra-Precise
Power/Energy/Charge Monitor.
The INA228 is very similar to the INA238 but offers four bits of extra
precision in the temperature, voltage and current measurement fields.
It also supports energy and charge monitoring, the latter of which is
not supported through this patch.
While it seems in the datasheet that some constants such as LSB values
differ between the 228 and the 238, they differ only for those registers
where four bits of precision have been added and they differ by a factor
of 16 (VBUS, VSHUNT, DIETEMP, CURRENT).
Therefore, the INA238 constants are still applicable with regard
to the bit of the same significance.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://lore.kernel.org/r/20250718-ina228-v2-3-227feb62f709@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add the ina228 to ina2xx bindings.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://lore.kernel.org/r/20250718-ina228-v2-2-227feb62f709@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Some purely cosmetic changes in ina238.c:
- When aligning definitions, do so consistently with tab stop of 8.
- Use spaces instead of tabs around operators.
- Align wrapped lines.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://lore.kernel.org/r/20250718-ina228-v2-1-227feb62f709@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
SMB1 already supports querying reparse points and detecting types of
symlink, fifo, socket, block and char.
This change implements the missing part - ability to create a new reparse
points over SMB1. This includes everything which SMB2+ already supports:
- native SMB symlinks and sockets
- NFS style of special files (symlinks, fifos, sockets, char/block devs)
- WSL style of special files (symlinks, fifos, sockets, char/block devs)
Attaching a reparse point to an existing file or directory is done via
SMB1 SMB_COM_NT_TRANSACT/NT_TRANSACT_IOCTL/FSCTL_SET_REPARSE_POINT command
and implemented in a new cifs_create_reparse_inode() function.
This change introduce a new callback ->create_reparse_inode() which creates
a new reperse point file or directory and returns inode. For SMB1 it is
provided via that new cifs_create_reparse_inode() function.
Existing reparse.c code was only slightly updated to call new protocol
callback ->create_reparse_inode() instead of hardcoded SMB2+ function.
This make the whole reparse.c code to work with every SMB dialect.
The original callback ->create_reparse_symlink() is not needed anymore as
the implementation of new create_reparse_symlink() function is dialect
agnostic too. So the link.c code was updated to call that function directly
(and not via callback).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
