summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-03-07tty: serial: Use GFP_ATOMIC instead of GFP_KERNEL in serial8250_em485_init()Matwey V. Kornilov
serial8250_em485_init() is supposed to be protected with p->port.lock spinlock. This may lead to issues when kmalloc sleeps, so it is better to use GFP_ATOMIC in this spinlocked context. Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250") Reported-by: Ильяс Гасанов <torso.nafi@gmail.com> Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07tty: serial: 8250: Cleanup p->em485 in serial8250_unregister_portMatwey V. Kornilov
Formally, currently there is no memory leak, but if serial8250_ports[line] is reused with other 8250 driver, then em485 will be already activated and it will cause issues. Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250") Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07tty: audit: remove unused variableSudip Mukherjee
While building with W=1 we were getting build warning: drivers/tty/tty_audit.c:149:16: warning: variable 'sessionid' set but not used The local variable sessionid was only assigned the value of current->sessionid but was never reused. On further inspection it turned out that there is no need of audit_get_loginuid() also. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07Revert "sc16is7xx: implemented get_mctrl"Greg Kroah-Hartman
This reverts commit a3f0b77f36ca5c5871fb8daf7e66fa409abe1ed5. Maarten writes: It appears to be wrong and I don't have a good idea how to fix it yet. Cc: Maarten Brock <m.brock@vanmierlo.com> Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
2016-03-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix ordering of WEXT netlink messages so we don't see a newlink after a dellink, from Johannes Berg. 2) Out of bounds access in minstrel_ht_set_best_prob_rage, from Konstantin Khlebnikov. 3) Paging buffer memory leak in iwlwifi, from Matti Gottlieb. 4) Wrong units used to set initial TCP rto from cached metrics, also from Konstantin Khlebnikov. 5) Fix stale IP options data in the SKB control block from leaking through layers of encapsulation, from Bernie Harris. 6) Zero padding len miscalculated in bnxt_en, from Michael Chan. 7) Only CHECKSUM_PARTIAL packets should be passed down through GSO, fix from Hannes Frederic Sowa. 8) Fix suspend/resume with JME networking devices, from Diego Violat and Guo-Fu Tseng. 9) Checksums not validated properly in bridge multicast support due to the placement of the SKB header pointers at the time of the check, fix from Álvaro Fernández Rojas. 10) Fix hang/tiemout with r8169 if a stats fetch is done while the device is runtime suspended. From Chun-Hao Lin. 11) The forwarding database netlink dump facilities don't track the state of the dump properly, resulting in skipped/missed entries. From Minoura Makoto. 12) Fix regression from a recent 3c59x bug fix, from Neil Horman. 13) Fix list corruption in bna driver, from Ivan Vecera. 14) Big endian machines crash on vlan add in bnx2x, fix from Michal Schmidt. 15) Ethtool RSS configuration not propagated properly in mlx5 driver, from Tariq Toukan. 16) Fix regression in PHY probing in stmmac driver, from Gabriel Fernandez. 17) Fix SKB tailroom calculation in igmp/mld code, from Benjamin Poirier. 18) A past change to skip empty routing headers in ipv6 extention header parsing accidently caused fragment headers to not be matched any longer. Fix from Florian Westphal. 19) eTSEC-106 erratum needs to be applied to more gianfar chips, from Atsushi Nemoto. 20) Fix netdev reference after free via workqueues in usb networking drivers, from Oliver Neukum and Bjørn Mork. 21) mdio->irq is now an array rather than a pointer to dynamic memory, but several drivers were still trying to free it :-/ Fixes from Colin Ian King. 22) act_ipt iptables action forgets to set the family field, thus LOG netfilter targets don't work with it. Fix from Phil Sutter. 23) SKB leak in ibmveth when skb_linearize() fails, from Thomas Falcon. 24) pskb_may_pull() cannot be called with interrupts disabled, fix code that tries to do this in vmxnet3 driver, from Neil Horman. 25) be2net driver leaks iomap'd memory on removal, fix from Douglas Miller. 26) Forgotton RTNL mutex unlock in ppp_create_interface() error paths, from Guillaume Nault. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (97 commits) ppp: release rtnl mutex when interface creation fails cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind tcp: fix tcpi_segs_in after connection establishment net: hns: fix the bug about loopback jme: Fix device PM wakeup API usage jme: Do not enable NIC WoL functions on S0 udp6: fix UDP/IPv6 encap resubmit path be2net: Don't leak iomapped memory on removal. vmxnet3: avoid calling pskb_may_pull with interrupts disabled net: ethernet: Add missing MFD_SYSCON dependency on HAS_IOMEM ibmveth: check return of skb_linearize in ibmveth_start_xmit cdc_ncm: toggle altsetting to force reset before setup usbnet: cleanup after bind() in probe() mlxsw: pci: Correctly determine if descriptor queue is full mlxsw: spectrum: Always decrement bridge's ref count tipc: fix nullptr crash during subscription cancel net: eth: altera: do not free array priv->mdio->irq net/ethoc: do not free array priv->mdio->irq net: sched: fix act_ipt for LOG target asix: do not free array priv->mdio->irq ...
2016-03-07Merge branch 'overlayfs-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs fixes from Miklos Szeredi: "Overlayfs bug fixes. All marked as -stable material" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: copy new uid/gid into overlayfs runtime inode ovl: ignore lower entries when checking purity of non-directory entries ovl: fix getcwd() failure after unsuccessful rmdir ovl: fix working on distributed fs as lower layer
2016-03-07HID: multitouch: force retrieving of Win8 signature blobBenjamin Tissoires
The Synaptics 0x11e5 over I2C found in the Asus T100-CHI requires to fetch the signature blob to actually start sending events. With this patch, we should be close enough to the Windows driver which checks the content of the blob at plugin to validate or not the touchscreen. Link: https://bugzilla.kernel.org/show_bug.cgi?id=113481 Fixes: 6d4f5440 ("HID: multitouch: Fetch feature reports on demand for Win8 devices") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-07Revert "drm/radeon: call hpd_irq_event on resume"Linus Torvalds
This reverts commit dbb17a21c131eca94eb31136eee9a7fe5aff00d9. It turns out that commit can cause problems for systems with multiple GPUs, and causes X to hang on at least a HP Pavilion dv7 with hybrid graphics. This got noticed originally in 4.4.4, where this patch had already gotten back-ported, but 4.5-rc7 was verified to have the same problem. Alexander Deucher says: "It looks like you have a muxed system so I suspect what's happening is that one of the display is being reported as connected for both the IGP and the dGPU and then the desktop environment gets confused or there some sort problem in the detect functions since the mux is not switched to the dGPU. I don't see an easy fix unless Dave has any ideas. I'd say just revert for now" Reported-by: Jörg-Volker Peetz <jvpeetz@web.de> Acked-by: Alexander Deucher <Alexander.Deucher@amd.com> Cc: Dave Airlie <airlied@gmail.com> Cc: stable@kernel.org # wherever dbb17a21c131 got back-ported Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-07ppp: release rtnl mutex when interface creation failsGuillaume Nault
Add missing rtnl_unlock() in the error path of ppp_create_interface(). Fixes: 58a89ecaca53 ("ppp: fix lockdep splat in ppp_dev_uninit()") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07cdc_ncm: do not call usbnet_link_change from cdc_ncm_bindBjørn Mork
usbnet_link_change will call schedule_work and should be avoided if bind is failing. Otherwise we will end up with scheduled work referring to a netdev which has gone away. Instead of making the call conditional, we can just defer it to usbnet_probe, using the driver_info flag made for this purpose. Fixes: 8a34b0ae8778 ("usbnet: cdc_ncm: apply usbnet_link_change") Reported-by: Andrey Konovalov <andreyknvl@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07tcp: fix tcpi_segs_in after connection establishmentEric Dumazet
If final packet (ACK) of 3WHS is lost, it appears we do not properly account the following incoming segment into tcpi_segs_in While we are at it, starts segs_in with one, to count the SYN packet. We do not yet count number of SYN we received for a request sock, we might add this someday. packetdrill script showing proper behavior after fix : // Tests tcpi_segs_in when 3rd packet (ACK) of 3WHS is lost 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK> +.020 < P. 1:1001(1000) ack 1 win 32792 +0 accept(3, ..., ...) = 4 +.000 %{ assert tcpi_segs_in == 2, 'tcpi_segs_in=%d' % tcpi_segs_in }% Fixes: 2efd055c53c06 ("tcp: add tcpi_segs_in and tcpi_segs_out to tcp_info") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07net: hns: fix the bug about loopbackyankejian
It will always be passed if the soc is tested the loopback cases. This patch will fix this bug. Signed-off-by: Kejian Yan <yankejian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07jme: Fix device PM wakeup API usageGuo-Fu Tseng
According to Documentation/power/devices.txt The driver should not use device_set_wakeup_enable() which is the policy for user to decide. Using device_init_wakeup() to initialize dev->power.should_wakeup and dev->power.can_wakeup on driver initialization. And use device_may_wakeup() on suspend to decide if WoL function should be enabled on NIC. Reported-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07jme: Do not enable NIC WoL functions on S0Guo-Fu Tseng
Otherwise it might be back on resume right after going to suspend in some hardware. Reported-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07PCI: Allow a NULL "parent" pointer in pci_bus_assign_domain_nr()Krzysztof =?utf-8?Q?Ha=C5=82asa?=
pci_create_root_bus() passes a "parent" pointer to pci_bus_assign_domain_nr(). When CONFIG_PCI_DOMAINS_GENERIC is defined, pci_bus_assign_domain_nr() dereferences that pointer. Many callers of pci_create_root_bus() supply a NULL "parent" pointer, which leads to a NULL pointer dereference error. 7c674700098c ("PCI: Move domain assignment from arm64 to generic code") moved the "parent" dereference from arm64 to generic code. Only arm64 used that code (because only arm64 defined CONFIG_PCI_DOMAINS_GENERIC), and it always supplied a valid "parent" pointer. Other arches supplied NULL "parent" pointers but didn't defined CONFIG_PCI_DOMAINS_GENERIC, so they used a no-op version of pci_bus_assign_domain_nr(). 8c7d14746abc ("ARM/PCI: Move to generic PCI domains") defined CONFIG_PCI_DOMAINS_GENERIC on ARM, and many ARM platforms use pci_common_init(), which supplies a NULL "parent" pointer. These platforms (cns3xxx, dove, footbridge, iop13xx, etc.) crash with a NULL pointer dereference like this while probing PCI: Unable to handle kernel NULL pointer dereference at virtual address 000000a4 PC is at pci_bus_assign_domain_nr+0x10/0x84 LR is at pci_create_root_bus+0x48/0x2e4 Kernel panic - not syncing: Attempted to kill init! [bhelgaas: changelog, add "Reported:" and "Fixes:" tags] Reported: http://forum.doozan.com/read.php?2,17868,22070,quote=1 Fixes: 8c7d14746abc ("ARM/PCI: Move to generic PCI domains") Fixes: 7c674700098c ("PCI: Move domain assignment from arm64 to generic code") Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> CC: stable@vger.kernel.org # v4.0+
2016-03-07udp6: fix UDP/IPv6 encap resubmit pathBill Sommerfeld
IPv4 interprets a negative return value from a protocol handler as a request to redispatch to a new protocol. In contrast, IPv6 interprets a negative value as an error, and interprets a positive value as a request for redispatch. UDP for IPv6 was unaware of this difference. Change __udp6_lib_rcv() to return a positive value for redispatch. Note that the socket's encap_rcv hook still needs to return a negative value to request dispatch, and in the case of IPv6 packets, adjust IP6CB(skb)->nhoff to identify the byte containing the next protocol. Signed-off-by: Bill Sommerfeld <wsommerfeld@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07be2net: Don't leak iomapped memory on removal.Douglas Miller
The adapter->pcicfg resource is either mapped via pci_iomap() or derived from adapter->db. During be_remove() this resource was ignored and so could remain mapped after remove. Add a flag to track whether adapter->pcicfg was mapped or not, then use that flag in be_unmap_pci_bars() to unmap if required. Fixes: 25848c901 ("use PCI MMIO read instead of config read for errors") Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07vmxnet3: avoid calling pskb_may_pull with interrupts disabledNeil Horman
vmxnet3 has a function vmxnet3_parse_and_copy_hdr which, among other operations, uses pskb_may_pull to linearize the header portion of an skb. That operation eventually uses local_bh_disable/enable to ensure that it doesn't race with the drivers bottom half handler. Unfortunately, vmxnet3 preforms this parse_and_copy operation with a spinlock held and interrupts disabled. This causes us to run afoul of the WARN_ON_ONCE(irqs_disabled()) warning in local_bh_enable, resulting in this: WARNING: at kernel/softirq.c:159 local_bh_enable+0x59/0x90() (Not tainted) Hardware name: VMware Virtual Platform Modules linked in: ipv6 ppdev parport_pc parport microcode e1000 vmware_balloon vmxnet3 i2c_piix4 sg ext4 jbd2 mbcache sd_mod crc_t10dif sr_mod cdrom mptspi mptscsih mptbase scsi_transport_spi pata_acpi ata_generic ata_piix vmwgfx ttm drm_kms_helper drm i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: mperf] Pid: 6229, comm: sshd Not tainted 2.6.32-616.el6.i686 #1 Call Trace: [<c04624d9>] ? warn_slowpath_common+0x89/0xe0 [<c0469e99>] ? local_bh_enable+0x59/0x90 [<c046254b>] ? warn_slowpath_null+0x1b/0x20 [<c0469e99>] ? local_bh_enable+0x59/0x90 [<c07bb936>] ? skb_copy_bits+0x126/0x210 [<f8d1d9fe>] ? ext4_ext_find_extent+0x24e/0x2d0 [ext4] [<c07bc49e>] ? __pskb_pull_tail+0x6e/0x2b0 [<f95a6164>] ? vmxnet3_xmit_frame+0xba4/0xef0 [vmxnet3] [<c05d15a6>] ? selinux_ip_postroute+0x56/0x320 [<c0615988>] ? cfq_add_rq_rb+0x98/0x110 [<c0852df8>] ? packet_rcv+0x48/0x350 [<c07c5839>] ? dev_queue_xmit_nit+0xc9/0x140 ... Fix it by splitting vmxnet3_parse_and_copy_hdr into two functions: vmxnet3_parse_hdr, which sets up the internal/on stack ctx datastructure, and pulls the skb (both of which can be done without holding the spinlock with irqs disabled and vmxnet3_copy_header, which just copies the skb to the tx ring under the lock safely. tested and shown to correct the described problem. Applies cleanly to the head of the net tree Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Shrikrishna Khare <skhare@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> Acked-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07Merge tag 'wireless-drivers-for-davem-2016-03-04' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.5 iwlwifi * free firmware paging memory when the module is unloaded or device removed * fix pending frames counter to fix an issue when removing stations ssb * fix a build problem related to ssb_fill_sprom_with_fallback() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07net: ethernet: Add missing MFD_SYSCON dependency on HAS_IOMEMKrzysztof Kozlowski
The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet direct dependencies. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07ibmveth: check return of skb_linearize in ibmveth_start_xmitThomas Falcon
If skb_linearize fails, the driver should drop the packet instead of trying to copy it into the bounce buffer. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07cdc_ncm: toggle altsetting to force reset before setupBjørn Mork
Some devices will silently fail setup unless they are reset first. This is necessary even if the data interface is already in altsetting 0, which it will be when the device is probed for the first time. Briefly toggling the altsetting forces a function reset regardless of the initial state. This fixes a setup problem observed on a number of Huawei devices, appearing to operate in NTB-32 mode even if we explicitly set them to NTB-16 mode. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07EDAC, sb_edac: Fix logic when computing DIMM sizes on Xeon PhiHubert Chrzaniuk
Correct a typo introduced by d0cdf9003140 ("EDAC, sb_edac: Add Knights Landing (Xeon Phi gen 2) support") As a result under some configurations DIMMs were not correctly recognized. Problem affects only Xeon Phi architecture. Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: lukasz.anaczkowski@intel.com Link: http://lkml.kernel.org/r/1457361045-26221-1-git-send-email-hubert.chrzaniuk@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2016-03-07PCI: Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.hBjorn Helgaas
Christoph added a generic include/linux/pci-dma-compat.h, so now there's one place with most of the PCI DMA interfaces. Move more PCI DMA-related things there: - The PCI_DMA_* direction constants from linux/pci.h - The pci_set_dma_max_seg_size() and pci_set_dma_seg_boundary() CONFIG_PCI implementations from drivers/pci/pci.c - The pci_set_dma_max_seg_size() and pci_set_dma_seg_boundary() !CONFIG_PCI stubs from linux/pci.h - The pci_set_dma_mask() and pci_set_consistent_dma_mask() !CONFIG_PCI stubs from linux/pci.h Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-07drm/i915: Fix bogus dig_port_map[] assignment for pre-HSWTakashi Iwai
The recent commit [0bdf5a05647a: drm/i915: Add reverse mapping between port and intel_encoder] introduced a reverse mapping to retrieve intel_dig_port object from the port number. The code assumed that the port vs intel_dig_port are 1:1 mapping. But in reality, this was a too naive assumption. As Martin reported about the missing HDMI audio on his SNB machine, pre-HSW chips may have multiple intel_dig_port objects corresponding to the same port. Since we assign the mapping statically at the init time and the multiple objects override the map, it may not match with the actually enabled output. This patch tries to address the regression above. The reverse mapping is provided basically only for the audio callbacks, so now we set / clear the mapping dynamically at enabling and disabling HDMI/DP audio, so that we can always track the latest and correct object corresponding to the given port. Fixes: 0bdf5a05647a ('drm/i915: Add reverse mapping between port and intel_encoder') Reported-and-tested-by: Martin Kepplinger <martink@posteo.de> Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456324522-21591-1-git-send-email-tiwai@suse.de (cherry picked from commit 9dfbffcf4ac0707097af9e6c1372192b9d03a357) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-03-07usbnet: cleanup after bind() in probe()Oliver Neukum
In case bind() works, but a later error forces bailing in probe() in error cases work and a timer may be scheduled. They must be killed. This fixes an error case related to the double free reported in http://www.spinics.net/lists/netdev/msg367669.html and needs to go on top of Linus' fix to cdc-ncm. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07PCI: Move pci_dma_* helpers to common codeChristoph Hellwig
For a long time all architectures implement the pci_dma_* functions using the generic DMA API, and they all use the same header to do so. Move this header, pci-dma-compat.h, to include/linux and include it from the generic pci.h instead of having each arch duplicate this include. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-07Merge branch 'mlxsw-fixes'David S. Miller
Jiri Pirko says: ==================== mlxsw: couple of fixes Couple of fixes from Ido. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07mlxsw: pci: Correctly determine if descriptor queue is fullIdo Schimmel
The descriptor queues for sending (SDQs) and receiving (RDQs) packets are managed by two counters - producer and consumer - which are both 16-bit in size. A queue is considered full when the difference between the two equals the queue's maximum number of descriptors. However, if the producer counter overflows, then it's possible for the full queue check to fail, as it doesn't take the overflow into account. In such a case, descriptors already passed to the device - but for which a completion has yet to be posted - will be overwritten, thereby causing undefined behavior. The above can be achieved under heavy load (~30 netperf instances). Fix that by casting the subtraction result to u16, preventing it from being treated as a signed integer. Fixes: eda6500a987a ("mlxsw: Add PCI bus implementation") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07mlxsw: spectrum: Always decrement bridge's ref countIdo Schimmel
Since we only support one VLAN filtering bridge we need to associate a reference count with it, so that when the last port netdev leaves it, we would know that a different bridge can be offloaded to hardware. When a LAG device is memeber in a bridge and port netdevs are leaving the LAG, we should always decrement the bridge's reference count, as it's incremented for any port in the LAG. Fixes: 4dc236c31733 ("mlxsw: spectrum: Handle port leaving LAG while bridged") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07frv/PCI: Remove stray pci_{alloc,free}_consistent() declarationChristoph Hellwig
FRV doesn't implement pci_{alloc,free}_consistent(), so remove the declarations for them. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: David Howells <dhowells@redhat.com>
2016-03-07s390/pci: add ioctl interface for CLPMartin Schwidefsky
Provide a user space interface to issue call logical-processor instructions. Only selected CLP commands are allowed, enough to get the full overview of the installed PCI functions. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-07ALSA: hda - Use snd_hdac namespace prefix for chmap exported APIsSubhransu S. Prusty
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-07ALSA: hda - Move chmap support helpers/ops to coreSubhransu S. Prusty
Chmap helpers, ops, controls are moved to core. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-07ALSA: hda - chmap helper args modified to use generic hdac objs.Subhransu S. Prusty
Chmap helper arguments are modified to use either hdac_device object or hdac_chmap object instead of codec specific object. With this moving these APIs to core will be easier. Helper added to access a specific channel_allocation object instead of directly accessing. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-07ALSA: hda - Add hdmi chmap verb programming ops to chmap objectSubhransu S. Prusty
Add slot and channel count programming to hdmi_chmap object and move the chmap_ops to core. Use register_chmap_ops API to register for default ops. Override specific chmap ops in the driver. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-07ALSA: hda - Use hdac name space for CEA spk alloc structureSubhransu S. Prusty
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-07ALSA: hda - Register chmap obj as priv data instead of codecSubhransu S. Prusty
With this chmap object is added as private data and new ops are added to access driver specific chmap. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-07ALSA: hda - Create common chmap objectSubhransu S. Prusty
chmap object represents multichannel capability and contains chmap ops. Legacy driver is updated to use this. With next set of patches chmap object is moved to common to be reused by other drivers (ex: skylake ASoC hdmi driver). Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-07s390: Use pr_warn instead of pr_warningJoe Perches
Convert the uses of pr_warning to pr_warn so there are fewer uses of the old pr_warning. Miscellanea: o Align arguments o Coalesce formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-07s390/dasd: remove casts to dasd_*_privateSebastian Ott
Convert dasd_device.private to be a void pointer to get rid of a lot of explicit casts. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-07s390/dasd: Refactor dasd format functionsJan Höppner
Prepare for new format checking function by renaming functions and moving reusable code to separate functions: - Move sanity checks into a new function and make it reusable. - Move common format code to a new function called dasd_eckd_format_process_data. - Create the generic function dasd_eckd_format_build_ccw_req, which itself will then decide what ccw request is being built according to the input data. (with upcoming functionality). Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-07s390/dasd: Simplify code in format logicJan Höppner
Currently, dasd_format is calling the format logic of a DASD discipline with PAV enabled. If that fails with an error code of -EAGAIN the value of retries is decremented and the discipline function is called with PAV turned off. The loop is supposed to try this up to 255 times until success. However, -EAGAIN can only occur once here and therefore the loop will never reach the 255 retries. So, replace the unnecessarily complicated loop logic and simply try again without PAV enabled in case of an -EAGAIN error. Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-07s390/dasd: Improve dasd format codeJan Höppner
- Make sure a calling function can rely on data in fdata by resetting to its initial values - Move special treatment for track 0 and 1 to dasd_eckd_build_format - Replace dangerous backward goto with a loop logic - Add define for number that specifies the maximum amount of CCWs per request and is used for format_step calculation - Remove unused variable Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-07Merge tag 'asoc-fix-v4.5-rc6' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.5 This is far too big a set of fixes for this late in the release cycle but the overwhelming bulk is essentially the same simple fix from Takashi for a cut'n'pasted 64 bit cleanliness issue in the userspace interface where drivers were accessing things using the wrong element in a union which worked OK on 32 bit platforms as the correct element happened to be aligned the same way but with 64 bit platforms ABIs are different and the two members of the union are laid out in different places. They aren't all tagged to stable since some of these chips have vanishingly little chance of being used in 64 bit systems. The other changes are: - A fix for Qualcomm devices to work on big endian systems. The original change is actually correct but triggered a bug in regmap which is too invasive to fix for this cycle and can be worked around by just letting regmap pick the default. - A fix for the Samsung I2S driver locking which wasn't using IRQ safe spinlocks when it needed to. - A fix for the new Intel Sky Lake driver forgetting that C pointer arithmetic takes the type of the pointer into consideration. - A revert of a change to the FSL SSI driver that broke some systems. - A fix for the cleanup path of the wm9713 driver. - A fix for some incorrect register definitions in the ADAU17x1 driver that caused misclocking in some configurations. - A fix for the tracepoints for jack detection to avoid using an internal field of the core jack structure which is no longer present in all configurations. - A fix for another of the new Intel drivers which tried to write to a string literal.
2016-03-07ARM: dts: dra7: do not gate cpsw clock due to errata i877Mugunthan V N
Errata id: i877 Description: ------------ The RGMII 1000 Mbps Transmit timing is based on the output clock (rgmiin_txc) being driven relative to the rising edge of an internal clock and the output control/data (rgmiin_txctl/txd) being driven relative to the falling edge of an internal clock source. If the internal clock source is allowed to be static low (i.e., disabled) for an extended period of time then when the clock is actually enabled the timing delta between the rising edge and falling edge can change over the lifetime of the device. This can result in the device switching characteristics degrading over time, and eventually failing to meet the Data Manual Delay Time/Skew specs. To maintain RGMII 1000 Mbps IO Timings, SW should minimize the duration that the Ethernet internal clock source is disabled. Note that the device reset state for the Ethernet clock is "disabled". Other RGMII modes (10 Mbps, 100Mbps) are not affected Workaround: ----------- If the SoC Ethernet interface(s) are used in RGMII mode at 1000 Mbps, SW should minimize the time the Ethernet internal clock source is disabled to a maximum of 200 hours in a device life cycle. This is done by enabling the clock as early as possible in IPL (QNX) or SPL/u-boot (Linux/Android) by setting the register CM_GMAC_CLKSTCTRL[1:0]CLKTRCTRL = 0x2:SW_WKUP. So, do not allow to gate the cpsw clocks using ti,no-idle property in cpsw node assuming 1000 Mbps is being used all the time. If someone does not need 1000 Mbps and wants to gate clocks to cpsw, this property needs to be deleted in their respective board files. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2016-03-07ARM: OMAP2+: hwmod: Introduce ti,no-idle dt propertyLokesh Vutla
Introduce a dt property, ti,no-idle, that prevents an IP to idle at any point. This is to handle Errata i877, which tells that GMAC clocks cannot be disabled. Acked-by: Roger Quadros <rogerq@ti.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Rob Herring <robh@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2016-03-07Merge tag 'v4.5-rc7' into x86/asm, to pick up SMAP fixIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-07ASoC: rsnd: CMD TIMSEL support for CaptureKuninori Morimoto
CMD.out should use same as SRC.out for TIMSEL settings, but it cares Playback case only. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07ASoC: rsnd: SRC TIMSEL support for CaptureKuninori Morimoto
SRC has Sync/Async mode, and it can't use Sync mode when Capture with CMD. In Async mode, it needs to care about in/out SRC rate for settings, but current driver supporting Playback case only. This patch supports Capture case. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-22 01:37:32 +0000