summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-04-19drm/xe: Define all possible engines in media IP descriptorsMatt Roper
Rather than trying to identify exactly which engines are available on each platform in the IP descriptor, just include the list of all media engines that the IP could theoretically support (i.e., 8 VCS + 4 VECS). We still rely on the media fuse registers to tell us which specific engine instances are actually present on a given platform, so there shouldn't be any functional change. This will help prevent mistakes with engine numbering (for example ambiguity about whether the 2nd VCS engine on a platform with exactly two engines is numbered "VCS1" or "VCS2") and will also future-proof the code a bit more in case new SKUs or platform refreshes extend the engine list in the future. Note that the media fuse register technically has an 8-bit field for VECS engine presence starting on Xe2. However there's still no MMIO register range reserved for VE engines above VECS3, so VE0-VE3 is still consider the "maximum" VE engine mask that the driver can support for now. Bspec: 52614, 52615, 62567 Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417152621.3357990-2-matthew.d.roper@intel.com
2024-04-19drm/i915/dp_mst: Enable HBLANK expansion quirk for UHBR ratesImre Deak
Enabling the 5k@60Hz uncompressed mode on the MediaTek/Dell U3224KBA monitor results in a blank screen, at least on MTL platforms on UHBR link rates with some (<30) uncompressed bpp values. Enabling compression fixes the problem, so do that for now. Windows enables DSC always if the sink supports it and forcing it to enable the mode without compression leads to the same problem above (which suggests a panel issue with uncompressed mode). The same 5k mode on non-UHBR link rates is not affected and lower resolution modes are not affected either. The problem is similar to the one fixed by the HBLANK expansion quirk on Synaptics hubs, with the difference that the problematic mode has a longer HBLANK duration. Also the monitor doesn't report supporting HBLANK expansion; either its internal MST hub does the expansion internally - similarly to the Synaptics hub - or the issue has another root cause, but still related to the mode's short HBLANK duration. Enable the quirk for the monitor adjusting the detection for the above differences. v2: Rebase on drm_dp_128132b_supported() change. Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417142217.457902-1-imre.deak@intel.com
2024-04-19drm/i915/dp_mst: Make HBLANK expansion quirk work for logical portsImre Deak
The DPCD OUI of the logical port on a Dell UHBR monitor - on which the AUX device is used to enable DSC - is all 0. To detect if the HBLANK expansion quirk is required for this monitor use the OUI of the port's parent instead. Since in the above case the DPCD of both the logical port and the parent port reports being a sink device (vs. branch device) type, read the proper sink/branch OUI based on the DPCD device type. This is required by a follow-up patch enabling the quirk for the above Dell monitor. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-11-imre.deak@intel.com
2024-04-19drm/dp_mst: Add drm_dp_mst_aux_for_parent()Imre Deak
Add a function to get the AUX device of the parent of an MST port, used by a follow-up i915 patch in the patchset. v2: Move drm_dp_mst_aux_for_parent() forward declaration to this patch (Ankit) Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-10-imre.deak@intel.com
2024-04-19drm/dp_mst: Factor out drm_dp_mst_port_is_logical()Imre Deak
Factor out a function to check if an MST port is logical, used by a follow-up i915 patch in the patchset. v2: Move drm_dp_mst_aux_for_parent() forward declaration to the next patch. (Ankit) Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-9-imre.deak@intel.com
2024-04-19drm/dp: Add drm_dp_128b132b_supported()Imre Deak
Factor out a function to check for 128b/132b channel coding support used by a follow-up patch in the patchset. v2: s/drm_dp_uhbr_channel_coding_supported()/drm_dp128b132b_supported() (Jani) Cc: dri-devel@lists.freedesktop.org Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417141936.457796-1-imre.deak@intel.com
2024-04-19drm/i915/dp_mst: Sanitize calculating the DSC DPT bpp limitImre Deak
Instead of checking each compressed bpp value against the maximum DSC/DPT bpp, simplify things by calculating the maximum bpp upfront and limiting the range of bpps looped over using this maximum. While at it add a comment about the origin of the DSC/DPT bpp limit. Bspec: 49259, 68912 Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-7-imre.deak@intel.com
2024-04-19drm/i915/dp_mst: Account with the DSC DPT bpp limit on MTLImre Deak
The DPT/DSC bpp limit should be accounted for on MTL platforms as well, do so. Bspec: 49259 Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-6-imre.deak@intel.com
2024-04-19drm/i915/dp_mst: Account for channel coding efficiency in the DSC DPT bpp limitImre Deak
The DSC DPT interface BW limit check should take into account the link clock's (aka DDI clock in bspec) channel coding efficiency overhead. Bspec suggests that the FEC overhead needs to be applied, however HW people claim this isn't the case, nor is any overhead applicable. However based on testing various 5k/6k modes both on the DELL U3224KBA monitor and the Unigraf UCD-500 CTS test device, both the channel coding efficiency (which includes the FEC overhead) and an additional 3% overhead must be accounted for to get these modes working. Bspec: 49259 v2: - Apply an additional 3% overhead, add a commit log and code comment about these overheads and the relation to the Bspec BW limit formula. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-5-imre.deak@intel.com
2024-04-19Merge tag 'usb-serial-6.9-rc5' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial device ids for 6.9-rc5 Here are some new modem device ids for 6.9-rc5. All have been in linux-next with no reported issues. * tag 'usb-serial-6.9-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Telit FN920C04 rmnet compositions USB: serial: option: add Rolling RW101-GL and RW135-GL support USB: serial: option: add Lonsung U8300/U9300 product USB: serial: option: add support for Fibocom FM650/FG650 USB: serial: option: support Quectel EM060K sub-models USB: serial: option: add Fibocom FM135-GL variants
2024-04-19blk-iocost: do not WARN if iocg was already offlinedLi Nan
In iocg_pay_debt(), warn is triggered if 'active_list' is empty, which is intended to confirm iocg is active when it has debt. However, warn can be triggered during a blkcg or disk removal, if iocg_waitq_timer_fn() is run at that time: WARNING: CPU: 0 PID: 2344971 at block/blk-iocost.c:1402 iocg_pay_debt+0x14c/0x190 Call trace: iocg_pay_debt+0x14c/0x190 iocg_kick_waitq+0x438/0x4c0 iocg_waitq_timer_fn+0xd8/0x130 __run_hrtimer+0x144/0x45c __hrtimer_run_queues+0x16c/0x244 hrtimer_interrupt+0x2cc/0x7b0 The warn in this situation is meaningless. Since this iocg is being removed, the state of the 'active_list' is irrelevant, and 'waitq_timer' is canceled after removing 'active_list' in ioc_pd_free(), which ensures iocg is freed after iocg_waitq_timer_fn() returns. Therefore, add the check if iocg was already offlined to avoid warn when removing a blkcg or disk. Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20240419093257.3004211-1-linan666@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-19drm/i915/dp_mst: Fix BW limit check when calculating DSC DPT bppImre Deak
The DSC DPT bpp limit check should only fail if the available DPT BW is less than the required BW, fix the check accordingly. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-4-imre.deak@intel.com
2024-04-19drm/i915/dp_mst: Fix symbol clock when calculating the DSC DPT bpp limitImre Deak
The expected link symbol clock unit when calculating the DSC DPT bpp limit is kSymbols/sec, aligning with the dotclock's kPixels/sec unit based on the crtc clock. As opposed to this port_clock is used - which has a 10 kbits/sec unit - with the resulting symbol clock in 10 kSymbols/sec units (disregarding the rounding error for the 13.5Gbps rate). Fix the calculation using the expected 10x factor. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-3-imre.deak@intel.com
2024-04-19drm/i915/dp: Fix DSC line buffer depth programmingImre Deak
Fix the calculation of the DSC line buffer depth. This is limited both by the source's and sink's maximum line buffer depth, but the former one was not taken into account. On all Intel platform's the source's maximum buffer depth is 13, so the overall limit is simply the minimum of the source/sink's limit, regardless of the DSC version. This leaves the DSI DSC line buffer depth calculation as-is, trusting VBT. On DSC version 1.2 for sinks reporting a maximum line buffer depth of 16 the line buffer depth was incorrectly programmed as 0, leading to a corruption in color gradients / lines on the decompressed screen image. Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Manasi Navare <navaremanasi@chromium.org> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-2-imre.deak@intel.com
2024-04-19drm/i915/display: force qgv check after the hw state readoutVinod Govindapillai
The current intel_bw_atomic_check do not check the possbility of a sagv configuration change after the hw state readout. Hence cannot update the sagv configuration until some other relevant changes like data rates, number of planes etc. happen. Introduce a flag to force qgv check in such cases. Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-7-vinod.govindapillai@intel.com
2024-04-19drm/i915/display: handle systems with duplicate psf gv pointsStanislav Lisovskiy
There could be multiple qgv and psf gv points with similar values. Apparently pcode's handling of psf and qgv points are different. For qgv case, pcode sets whatever is asked by the driver. But in case of psf gv points, it compares the bw from points before setting the mask. This can cause problems in scenarios where we have to disable sagv by setting the highest bw point and there could be multiple points with highest bw. So to set the maximum psf gv point, find out all the points with the highest bw and set all together. v1: - use the same treatment to qgv points as well (Vinod) v2: - pcode confirms that for qgv points, it sets whatever the driver sets (Vinod) Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-6-vinod.govindapillai@intel.com
2024-04-19drm/i915/display: Disable SAGV on bw init, to force QGV point recalculationStanislav Lisovskiy
Problem is that on some platforms, we do get QGV point mask in wrong state on boot. However driver assumes it is set to 0 (i.e all points allowed), however in reality we might get them all restricted, causing issues. Lets disable SAGV initially to force proper QGV point state. If more QGV points are available, driver will recalculate and update those then after next commit. v2: - Added trace to see which QGV/PSF GV point is used when SAGV is disabled. v3: - Move force disable function to intel_bw_init in order to initialize bw state as well, so that hw/sw are immediately in sync after init. v4: - Don't try sending PCode request, seems like it is not possible at intel_bw_init, however assigning bw->state to be restricted as if SAGV is off, still forces driveer to send PCode request anyway on next modeset, so the solution still works. However we still need to address the case, when no display is connected, which anyway requires much more changes. v5: - Put PCode request back and apply temporary hack to make the request succeed(in case if there 2 PSF GV points with same BW, PCode accepts only if both points are restricted/unrestricted same time) - Fix argument sequence for adl_qgv_bw(Ville Syrjälä) v6: - Fix wrong platform checks, not to break everything else. v7: - Split the handling of quplicate QGV/PSF GV points (Vinod) Restrict force disable to display version below 14 (Vinod) v8: - Simplify icl_force_disable_sagv (Vinod) Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-5-vinod.govindapillai@intel.com
2024-04-19drm/i915/display: extract code to prepare qgv points maskVinod Govindapillai
Extract the code to prepare the QGV points mask as per the format expected by the pcode as this could be utlized from multiple points. Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-4-vinod.govindapillai@intel.com
2024-04-19drm/i915/display: Extract code required to calculate max qgv/psf gv pointStanislav Lisovskiy
We need that in order to force disable SAGV in next patch. Also it is beneficial to separate that code, as in majority cases, when SAGV is enabled, we don't even need those calculations. Also we probably need to determine max PSF GV point as well, however currently we don't do that when we disable SAGV, which might be actually causing some issues in that case. v2: - Introduce helper adl_qgv_bw(counterpart to adl_psf_bw) (Ville Syrjälä) - Don't restrict psf gv points for SAGV disable case (Ville Syrjälä) v3: - Update icl_max_bw_qgv_point_mask to return max qgv point mask (Vinod) v4: - Minor changes in icl_find_qgv_points (Vinod) v5: - use max_bw_point instead of max_bw_point_mask (stan) Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-3-vinod.govindapillai@intel.com
2024-04-19thermal/debugfs: Add missing count increment to thermal_debug_tz_trip_up()Rafael J. Wysocki
The count field in struct trip_stats, representing the number of times the zone temperature was above the trip point, needs to be incremented in thermal_debug_tz_trip_up(), for two reasons. First, if a trip point is crossed on the way up for the first time, thermal_debug_update_temp() called from update_temperature() does not see it because it has not been added to trips_crossed[] array in the thermal zone's struct tz_debugfs object yet. Therefore, when thermal_debug_tz_trip_up() is called after that, the trip point's count value is 0, and the attempt to divide by it during the average temperature computation leads to a divide error which causes the kernel to crash. Setting the count to 1 before the division by incrementing it fixes this problem. Second, if a trip point is crossed on the way up, but it has been crossed on the way up already before, its count value needs to be incremented to make a record of the fact that the zone temperature is above the trip now. Without doing that, if the mitigations applied after crossing the trip cause the zone temperature to drop below its threshold, the count will not be updated for this episode at all and the average temperature in the trip statistics record will be somewhat higher than it should be. Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes") Cc :6.8+ <stable@vger.kernel.org> # 6.8+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-19drm/i915/display: Add meaningful traces for QGV point info error handlingStanislav Lisovskiy
For debug purposes we need those - error path won't flood the log, however there has been already numerous cases, when due to lack of debugs, we couldn't immediately tell what was the problem on customer machine, which slowed down the investigation, requiring to get access to target device and adding those traces manually. v2: - Make the debug more generic and move it to intel_dram_detect (Gustavo Sousa) v3: - Use %u for unsigned variable in debug prints (Gustavo) Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-2-vinod.govindapillai@intel.com
2024-04-19vxlan: drop packets from invalid src-addressDavid Bauer
The VXLAN driver currently does not check if the inner layer2 source-address is valid. In case source-address snooping/learning is enabled, a entry in the FDB for the invalid address is created with the layer3 address of the tunnel endpoint. If the frame happens to have a non-unicast address set, all this non-unicast traffic is subsequently not flooded to the tunnel network but sent to the learnt host in the FDB. To make matters worse, this FDB entry does not expire. Apply the same filtering for packets as it is done for bridges. This not only drops these invalid packets but avoids them from being learnt into the FDB. Fixes: d342894c5d2f ("vxlan: virtual extensible lan") Suggested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-19drm/rockchip: cdn-dp: drop driver owner assignmentKrzysztof Kozlowski
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240330202754.83907-1-krzysztof.kozlowski@linaro.org
2024-04-19drm/rockchip: lvds: Remove include of drm_dp_helper.hAndy Yan
drm_dp_helper.h is not used by lvds driver Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240414120841.837661-1-andyshrk@163.com
2024-04-19dt-bindings: display: add #sound-dai-cells property to rockchip inno hdmiJohan Jonker
The Rockchip inno HDMI controller can take one I2S input and transmit it over the HDMI output. Add #sound-dai-cells (= 0) to the binding for it. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/521d4229-7490-4494-8191-cd5f3119249e@gmail.com
2024-04-19dt-bindings: display: add #sound-dai-cells property to rockchip rk3066 hdmiJohan Jonker
The Rockchip rk3066 HDMI controller can take one I2S input and transmit it over the HDMI output. Add #sound-dai-cells (= 0) to the binding for it. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/b9864655-7c60-4066-8305-f291a3551872@gmail.com
2024-04-19dt-bindings: display: add #sound-dai-cells property to rockchip dw hdmiJohan Jonker
The Rockchip DWC HDMI TX Encoder can take one I2S input and transmit it over the HDMI output. Add #sound-dai-cells (= 0) to the binding for it. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/3a035c16-75b5-471d-aa9d-e91c2bb9f8d0@gmail.com
2024-04-19drm/rockchip: vop2: Do not divide height twice for YUVDetlev Casanova
For the cbcr format, gt2 and gt4 are computed again after src_h has been divided by vsub. As src_h as already been divided by 2 before, introduce cbcr_src_h and cbcr_src_w to keep a copy of those values to be used for cbcr gt2 and gt4 computation. This fixes yuv planes being unaligned vertically when down scaling to 1080 pixels from 2160. Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver") Acked-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240414182706.655270-1-detlev.casanova@collabora.com
2024-04-19net: libwx: fix alloc msix vectors failedDuanqiang Wen
driver needs queue msix vectors and one misc irq vector, but only queue vectors need irq affinity. when num_online_cpus is less than chip max msix vectors, driver will acquire (num_online_cpus + 1) vecotrs, and call pci_alloc_irq_vectors_affinity functions with affinity params without setting pre_vectors or post_vectors, it will cause return error code -ENOSPC. Misc irq vector is vector 0, driver need to set affinity params .pre_vectors = 1. Fixes: 3f703186113f ("net: libwx: Add irq flow functions") Signed-off-by: Duanqiang Wen <duanqiangwen@net-swift.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-19ALSA: seq: ump: Fix conversion from MIDI2 to MIDI1 UMP messagesTakashi Iwai
The conversion from MIDI2 to MIDI1 UMP messages had a leftover artifact (superfluous bit shift), and this resulted in the bogus type check, leading to empty outputs. Let's fix it. Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events") Cc: <stable@vger.kernel.org> Link: https://github.com/alsa-project/alsa-utils/issues/262 Message-ID: <20240419100442.14806-1-tiwai@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-04-19ALSA: hda/realtek - Enable audio jacks of Haier Boyue G42 with ALC269VCAi Chao
The Haier Boyue G42 with ALC269VC cannot detect the MIC of headset, the line out and internal speaker until ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS quirk applied. Signed-off-by: Ai Chao <aichao@kylinos.cn> Cc: <stable@vger.kernel.org> Message-ID: <20240419082159.476879-1-aichao@kylinos.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-04-19drm/i915: Convert intel_runtime_pm_get_noresume towards raw wakerefRodrigo Vivi
In the past, the noresume function was used by the GEM code to ensure wakelocks were held and bump its usage. This is no longer the case and this function was totally unused until it started to be used again by display with commit 77e619a82fc3 ("drm/i915/display: convert inner wakeref get towards get_if_in_use") However, on the display code, most of the callers are using the raw wakeref, rather then the wakelock version. What caused a major regression caught by CI. Another option to this patch is to go with the original plan and use the get_if_in_use variant in the display code, what is enough to fulfil our needs. Then, an extra patch to delete the unused _noresume variant. v2: Keep grabbing wakelock but only assert for wakeref. (Imre) Cc: Imre Deak <imre.deak@intel.com> Cc: Francois Dugast <francois.dugast@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: 77e619a82fc3 ("drm/i915/display: convert inner wakeref get towards get_if_in_use") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10875 Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240418223756.68427-1-rodrigo.vivi@intel.com
2024-04-19wifi: mac80211: fix unaligned le16 accessJohannes Berg
The AP removal timer field need not be aligned, so the code shouldn't access it directly, but use unaligned loads. Use get_unaligned_le16(), which even is shorter than the current code since it doesn't need a cast. Fixes: 8eb8dd2ffbbb ("wifi: mac80211: Support link removal using Reconfiguration ML element") Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240418105220.356788ba0045.I2b3cdb3644e205d5bb10322c345c0499171cf5d2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: mac80211: remove link before APJohannes Berg
If the AP removal timer is long, we don't really want to remove the link immediately. However, we really should do it _before_ the AP removes it (which happens at or after count reaches 0), so subtract 1 from the countdown when scheduling the timer. This causes the link removal work to run just after the beacon with value 1 is received. If the counter is already zero, do it immediately. This fixes an issue where we do the removal too late and receive a beacon from the AP that's no longer associated with the MLD, but thus removed EHT and ML elements, and then we disconnect instead from the whole MLD, since one of the associated APs changed mode from EHT to HE. Fixes: 8eb8dd2ffbbb ("wifi: mac80211: Support link removal using Reconfiguration ML element") Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240418105220.03ac4a09fa74.Ifb8c8d38e3402721a81ce5981568f47b5c5889cb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: mac80211_hwsim: init peer measurement resultJohannes Berg
If we don't get all the values here, we might pass them to cfg80211 uninitialized. Fix that, even if the input might then not make much sense. Fixes: 2af3b2a631b1 ("mac80211_hwsim: add PMSR report support via virtio") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240418105220.e1317621c1f9.If7dd447de24d7493d133284db5e9e482e4e299f8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: nl80211: don't free NULL coalescing ruleJohannes Berg
If the parsing fails, we can dereference a NULL pointer here. Cc: stable@vger.kernel.org Fixes: be29b99a9b51 ("cfg80211/nl80211: Add packet coalesce support") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240418105220.b328f80406e7.Id75d961050deb05b3e4e354e024866f350c68103@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: mac80211: mlme: re-parse if AP mode is less than clientJohannes Berg
If the AP mode ends up being determined less than the client mode, there may be different reasons for this, e.g. AP misconfiguration. If this happens in a way that causes e.g. EHT to be rejected, the elements need to be re-parsed since we'll connect as HE, but not reparsing means that we'll still think it's OK to use multi-link, so we can connect in a non-sensical configuration of advertising only HE on a secondary link. This normally won't happen for the assoc link because that reuses the mode from authentication, and if that's not EHT, multi-link association is rejected. Fix this inconsistency by parsing the elements again if the mode was different from the first parsing attempt. Print the message a bit later to avoid printing "determined AP ... to be HE" twice in cases where ieee80211_determine_ap_chan() returned a lesser mode, rather than the regulatory downgrades below changing it. Fixes: 310c8387c638 ("wifi: mac80211: clean up connection process") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240418105220.d1f25d92cfe7.Ia21eff6cdcae2f5aca13cf8e742a986af5e70f89@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: mac80211: mlme: fix memory leakJohannes Berg
When re-parsing the elements here (with changed mode), free the original ones first to avoid leaking memory. Fixes: 310c8387c638 ("wifi: mac80211: clean up connection process") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240418105220.458421e3bbff.Icb5b84cba3ea420794cf009cf18ec3d76e434736@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: mac80211: mlme: re-parse with correct modeJohannes Berg
When doing re-parsing in ieee80211_determine_chan_mode(), the conn->mode is changed, and the whole point of doing the parsing again was to parse as the downgraded mode. However, that didn't actually work, because the setting was copied before and never changed again. Fix that. Fixes: 310c8387c638 ("wifi: mac80211: clean up connection process") Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240418105220.5e0d1fcb5622.Ib0673e0bc90033fd6d387b6a5f107c040eb907cf@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: mac80211: fix idle calculation with multi-linkJohannes Berg
The vif's idle state doesn't automatically go to true when any link removes the channel context, it's only idle when _all_ links no longer have a channel context. Fix that. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240418105220.90df97557702.I05d2228ce85c203b9f2d6da8538cc16dce46752a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19Revert "wifi: iwlwifi: bump FW API to 90 for BZ/SC devices"Johannes Berg
Revert the API version bump, the kernel doesn't actually have all the code to deal with that version yet. Fixes: 653a90f6b226 ("wifi: iwlwifi: bump FW API to 90 for BZ/SC devices") Link: https://msgid.link/20240419085147.cd756fadab03.Ibccbb65be8e05b516cae1b9fb27a959662f9f51a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19Merge tag 'drm-intel-next-2024-04-17-1' of ↵Dave Airlie
https://anongit.freedesktop.org/git/drm/drm-intel into drm-next Core Changes (DRM): - Fix documentation of DP tunnel functions (Imre) - DP MST read sideband messaging cap (Jani) - Preparation patches for Adaptive Sync SDP Support for DP (Mitul) Driver Changes: i915 core (non-display): - Documentation improvements (Nirmoy) - Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c (Joonas) - Do not print 'pxp init failed with 0' when it succeed (Jose) - Clean-up, including removal of dead code for unsupported platforms (Lucas) - Adding new DG2 PCI ID (Ravi) {i915,xe} display: - Spelling fix (Colin Ian) - Document CDCLK components (Gustavo) - Lunar Lake display enabling, including cdclk and other refactors (Gustavo, Bala) - BIOS/VBT/opregion related refactor (Jani, Ville, RK) - Save a few bytes of memory using {kstrdup,kfree}_const variant (Christophe) - Digital port related refactor/clean-up (Ville) - Fix 2s boot time regression on DP panel replay init (Animesh) - Remove redundant drm_rect_visible() overlay use (Arthur) - DSC HW state readout fixes (Imre) - Remove duplication on audio enable/disable on SDVO and g4x+ DP (Ville) - Disable AuxCCS framebuffers if built for Xe (Juha-Pekka) - Fix DSI init order (Ville) - DRRS related refactor and fixes (Bhanuprakash) - Fix DSB vblank waits with VRR (Ville) - General improvements on register name and use of REG_BIT (Ville) - Some display power well related improvements (Ville) - FBC changes for better w/a handling (Ville) - Make crtc disable more atomic (Ville) - Fix hwmon locking inversion in sysfs getter (Janusz) - Increase DP idle pattern wait timeout to 2ms (Shekhar) - PSR related fixes and improvents (Jouni) - Start using container_of_const() for some extra const safety (Ville) - Use drm_printer more on display code (Ville) - Fix Jasper Lake boot freeze (Jonathon) - Update Pipe src size check in skl_update_scaler (Ankit) - Enable MST mode for 128b/132b single-stream sideband (Jani) - Pass encoder around more for port/phy checks (Jani) - Some initial work to make display code more independent from i915 (Jani) - Pre-populate the cursor physical dma address (Ville) - Do not bump min backlight brightness to max on enable (Gareth) - Fix MTL supported DP rates - removal of UHBR13.5 (Arun) - Fix the computation for compressed_bpp for DISPLAY < 1 (Ankit) - Bigjoiner modeset sequence redesign and MST support (Ville) - Enable Adaptive Sync SDP Support for DP (Mitul) - Implemnt vblank sycnhronized mbus joining changes (Ville, Stanislav) - HDCP related fixes (Suraj) - Fix i915_display_info debugfs when connectors are not active (Ville) - Clean up on Xe compat layer (Jani) - Add jitter WAs for MST/FEC/DSC links (Imre) - DMC wakelock implementation (Luca) Signed-off-by: Dave Airlie <airlied@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmYfzQEACgkQ+mJfZA7r # E8qYvAf/T8KrEewHOWz7NOaKcFRCNYaF4QTdVOfgHUYBX5NPDF/xzwFdHCL8QWQu # bwKwE2b94VEyruG3DYwTMd8GNcDxrsOrmU0IZe3PVkm+BvHLTmrOqL6BlCd85zXF # 02IuE+LCaWREmmpLMcsDMxsaaq8yp+cw9/F0jJDrH6LiyfxFriefxyZYpGYjRCuv # 8GP1fHXLFV2yys4rveR/+y9xIhgy82mVcg3/Kfk0+er7gALkY6Vc0N38wedET9MZ # ZPfVidBeaTkIKcCDFKnFzGjG+9rNQ7NFrXyS7Hl97VolGt2l03qGGPNW1PouDiUx # 7Y8CJOc+1k9wyBMKl0a/NQBRAqSZBQ== # =JvZN # -----END PGP SIGNATURE----- # gpg: Signature made Wed 17 Apr 2024 23:22:09 AEST # gpg: using RSA key 6D207068EEDD65091C2CE2A3FA625F640EEB13CA # gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" [unknown] # gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Zh_Q72gYKMMbge9A@intel.com
2024-04-18drm/amdkfd: make sure VM is ready for updating operationsLang Yu
When page table BOs were evicted but not validated before updating page tables, VM is still in evicting state, amdgpu_vm_update_range returns -EBUSY and restore_process_worker runs into a dead loop. v2: Split the BO validation and page table update into two separate loops in amdgpu_amdkfd_restore_process_bos. (Felix) 1.Validate BOs 2.Validate VM (and DMABuf attachments) 3.Update page tables for the BOs validated above Fixes: 50661eb1a2c8 ("drm/amdgpu: Auto-validate DMABuf imports in compute VMs") Signed-off-by: Lang Yu <Lang.Yu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-18drm/amdgpu: Fix leak when GPU memory allocation failsMukul Joshi
Free the sync object if the memory allocation fails for any reason. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-18drm/amdkfd: Fix eviction fence handlingFelix Kuehling
Handle case that dma_fence_get_rcu_safe returns NULL. If restore work is already scheduled, only update its timer. The same work item cannot be queued twice, so undo the extra queue eviction. Fixes: 9a1c1339abf9 ("drm/amdkfd: Run restore_workers on freezable WQs") Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Tested-by: Gang BA <Gang.Ba@amd.com> Reviewed-by: Gang BA <Gang.Ba@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-18drm/amdgpu: remove virt_init_data_exchange from poison consumption handlerZhigang Luo
Host will initiate an FLR for all poison consumption. Guest should wait for FLR message to re-init data exchange. Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-18drm/amdgpu: Change AID detection logicLijo Lazar
On GFX 9.4.3 SOCs, only 2 SDMA instances need to be available to be considered as a valid AID. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-18drm/amd/display: Set color_mgmt_changed to true on unsuspendJoshua Ashton
Otherwise we can end up with a frame on unsuspend where color management is not applied when userspace has not committed themselves. Fixes re-applying color management on Steam Deck/Gamescope on S3 resume. Signed-off-by: Joshua Ashton <joshua@froggi.es> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-18drm/amdgpu: enable redirection of irq's for IH V6.1Sunil Khatri
Enable redirection of irq for pagefaults for specific clients to avoid overflow without dropping interrupts. So here we redirect the interrupts to another IH ring i.e ring1 where only these interrupts are processed. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-18drm/amdgpu: Skip the coredump collection on reset during driver reloadAhmad Rehman
In passthrough environment, the driver triggers the mode-1 reset on reload. The reset causes the core dump collection which is delayed task and prevents driver from unloading until it is completed. Since we do not need to collect data on "reset on reload" case, we can skip core dump collection. v2: Use the same flag to avoid calling amdgpu_reset_reg_dumps as well. Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-14 13:24:42 +0000