| Age | Commit message (Collapse) | Author |
|---|
|
Pull ARM and clkdev fixes from Russell King:
- Fix clkdev - erroring out on long strings causes boot failures, so
don't do this. Still warn about the over-sized strings (which will
never match and thus their registration with clkdev is useless)
- Fix for ftrace with frame pointer unwinder with recent GCC changing
the way frames are stacked.
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9405/1: ftrace: Don't assume stack frames are contiguous in memory
clkdev: don't fail clkdev_alloc() if over-sized
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 fixes insufficient sanitization of netlink attributes for the
inner expression which can trigger nul-pointer dereference,
from Davide Ornaghi.
Patch #2 address a report that there is a race condition between
namespace cleanup and the garbage collection of the list:set
type. This patch resolves this issue with other minor issues
as well, from Jozsef Kadlecsik.
Patch #3 ip6_route_me_harder() ignores flowlabel/dsfield when ip dscp
has been mangled, this unbreaks ip6 dscp set $v,
from Florian Westphal.
All of these patches address issues that are present in several releases.
* tag 'nf-24-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: Use flowlabel flow key when re-routing mangled packets
netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
netfilter: nft_inner: validate mandatory meta and payload
====================
Link: https://lore.kernel.org/r/20240611220323.413713-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull bcachefs fixes from Kent Overstreet:
- fix kworker explosion, due to calling submit_bio() (which can block)
from a multithreaded workqueue
- fix error handling in btree node scan
- forward compat fix: kill an old debug assert
- key cache shrinker fixes
This is a partial fix for stalls doing multithreaded creates - there
were various O(n^2) issues the key cache shrinker was hitting [1].
There's more work coming here; I'm working on a patch to delete the
key cache lock, which initial testing shows to be a pretty drastic
performance improvement
- assorted syzbot fixes
Link: https://lore.kernel.org/linux-bcachefs/CAGudoHGenxzk0ZqPXXi1_QDbfqQhGHu+wUwzyS6WmfkUZ1HiXA@mail.gmail.com/ [1]
* tag 'bcachefs-2024-06-12' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix rcu_read_lock() leak in drop_extra_replicas
bcachefs: Add missing bch_inode_info.ei_flags init
bcachefs: Add missing synchronize_srcu_expedited() call when shutting down
bcachefs: Check for invalid bucket from bucket_gen(), gc_bucket()
bcachefs: Replace bucket_valid() asserts in bucket lookup with proper checks
bcachefs: Fix snapshot_create_lock lock ordering
bcachefs: Fix refcount leak in check_fix_ptrs()
bcachefs: Leave a buffer in the btree key cache to avoid lock thrashing
bcachefs: Fix reporting of freed objects from key cache shrinker
bcachefs: set sb->s_shrinker->seeks = 0
bcachefs: increase key cache shrinker batch size
bcachefs: Enable automatic shrinking for rhashtables
bcachefs: fix the display format for show-super
bcachefs: fix stack frame size in fsck.c
bcachefs: Delete incorrect BTREE_ID_NR assertion
bcachefs: Fix incorrect error handling found_btree_node_is_readable()
bcachefs: Split out btree_write_submit_wq
|
|
In order to improve performance of typical scenarios we can try to insert
the entire vma on fault. This accelerates typical cases, such as when
the MMIO region is DMA mapped by QEMU. The vfio_iommu_type1 driver will
fault in the entire DMA mapped range through fixup_user_fault().
In synthetic testing, this improves the time required to walk a PCI BAR
mapping from userspace by roughly 1/3rd.
This is likely an interim solution until vmf_insert_pfn_{pmd,pud}() gain
support for pfnmaps.
Suggested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/all/Zl6XdUkt%2FzMMGOLF@yzhao56-desk.sh.intel.com/
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20240607035213.2054226-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Make it again possible for sparse to verify that blk_status_t and Unix
error codes are used in the proper context by making nbd_send_cmd()
return a blk_status_t instead of an integer.
No functionality has been changed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[ bvanassche: added description and made two small formatting changes ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240604221531.327131-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The X-Powers AXP717 PMIC has separate input supply pins for each group
of LDOs, so they are not all using the same DCDC1 input, as described
currently.
Replace the "supply" member of each LDO description with the respective
group supply name, so that the supply dependencies can be correctly
described in the devicetree.
Also fix two off-by-ones in the regulator macros, after some double
checking the numbers against the datasheet. This uncovered a bug in the
datasheet: add a comment to document this.
Fixes: d2ac3df75c3a ("regulator: axp20x: add support for the AXP717")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/r/20240418000736.24338-3-andre.przywara@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to BSpec we now should call "master" pipes, "primary" pipes
and "slave" pipes, should be "secondary" pipes.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
[vsyrjala: Don't rename port sync stuff, catch a few more things]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603112551.6481-3-stanislav.lisovskiy@intel.com
|
|
Lets unify both bigjoiner and ultrajoiner under simple "joiner" name,
because in future we might have multiple configurations, involving
multiple bigjoiners, ultrajoiner, however it is possible to use
same api for handling both.
v2: - Renamed back some bigjoiner specific parts for now(Ville)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
[vsyrjala: Catch a few more cases]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607075457.15700-1-stanislav.lisovskiy@intel.com
|
|
There is a report of io_rsrc_ref_quiesce() locking a mutex while not
TASK_RUNNING, which is due to forgetting restoring the state back after
io_run_task_work_sig() and attempts to break out of the waiting loop.
do not call blocking ops when !TASK_RUNNING; state=1 set at
[<ffffffff815d2494>] prepare_to_wait+0xa4/0x380
kernel/sched/wait.c:237
WARNING: CPU: 2 PID: 397056 at kernel/sched/core.c:10099
__might_sleep+0x114/0x160 kernel/sched/core.c:10099
RIP: 0010:__might_sleep+0x114/0x160 kernel/sched/core.c:10099
Call Trace:
<TASK>
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0xb4/0x940 kernel/locking/mutex.c:752
io_rsrc_ref_quiesce+0x590/0x940 io_uring/rsrc.c:253
io_sqe_buffers_unregister+0xa2/0x340 io_uring/rsrc.c:799
__io_uring_register io_uring/register.c:424 [inline]
__do_sys_io_uring_register+0x5b9/0x2400 io_uring/register.c:613
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd8/0x270 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x6f/0x77
Reported-by: Li Shi <sl1589472800@gmail.com>
Fixes: 4ea15b56f0810 ("io_uring/rsrc: use wq for quiescing")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/77966bc104e25b0534995d5dbb152332bc8f31c0.1718196953.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 537db05da2ca8ccc1243c9dd1d0c148b84aa0432.
This change seems to result in a memory leak / RCU race and the following
kernel splat when the batman-adv kernel module is unloaded:
```
[ 112.208633] =============================================================================
[ 112.210359] BUG batadv_tl_cache (Tainted: G OE ): Objects remaining in batadv_tl_cache on __kmem_cache_shutdown()
[ 112.211943] -----------------------------------------------------------------------------
[ 112.212517] Slab 0xffffe8afc0216d00 objects=16 used=1 fp=0xffff93f4085b4340 flags=0xfffffc0000a00(workingset|slab|node=0|zone=1|lastcpupid=0x1fffff)
[ 112.212517] CPU: 1 PID: 776 Comm: rmmod Tainted: G OE 6.8.12-amd64 #1 Debian 6.8.12-1
[ 112.212517] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 112.212517] Call Trace:
[ 112.212517] <TASK>
[ 112.212517] dump_stack_lvl+0x64/0x80
[ 112.212517] slab_err+0xe6/0x120
[ 112.212517] __kmem_cache_shutdown+0x160/0x2e0
[ 112.212517] kmem_cache_destroy+0x55/0x160
[ 112.220849] batadv_tt_cache_destroy+0x15/0x60 [batman_adv]
[ 112.220849] __do_sys_delete_module+0x1d5/0x320
[ 112.220849] do_syscall_64+0x83/0x190
[ 112.220849] ? do_syscall_64+0x8f/0x190
[ 112.220849] ? exc_page_fault+0x7f/0x180
[ 112.220849] entry_SYSCALL_64_after_hwframe+0x78/0x80
[ 112.224478] RIP: 0033:0x7f2ac8434977
[ 112.224478] Code: 73 01 c3 48 8b 0d a9 94 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 79 94 0c 00 f7 d8 64 89 01 48
[ 112.224478] RSP: 002b:00007ffe0adf6138 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ 112.224478] RAX: ffffffffffffffda RBX: 000055db9018e770 RCX: 00007f2ac8434977
[ 112.224478] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055db9018e7d8
[ 112.224478] RBP: 0000000000000000 R08: 1999999999999999 R09: 0000000000000000
[ 112.224478] R10: 00007f2ac84a6ac0 R11: 0000000000000206 R12: 00007ffe0adf6390
[ 112.224478] R13: 000055db9018e770 R14: 000055db9018d2a0 R15: 0000000000000000
[ 112.233961] </TASK>
[ 112.233961] Disabling lock debugging due to kernel taint
[ 112.233961] Object 0xffff93f4085b4140 @offset=320
[ 112.233961] Allocated in batadv_tt_local_add+0x297/0xa20 [batman_adv] age=15835 cpu=1 pid=755
[ 112.233961] batadv_tt_local_add+0x297/0xa20 [batman_adv]
[ 112.233961] batadv_interface_set_mac_addr+0xf6/0x120 [batman_adv]
[ 112.233961] dev_set_mac_address+0xde/0x140
[ 112.233961] dev_set_mac_address_user+0x30/0x50
[ 112.233961] do_setlink+0x261/0x12d0
[ 112.233961] rtnl_setlink+0x11f/0x1d0
[ 112.233961] rtnetlink_rcv_msg+0x152/0x3c0
[ 112.241772] netlink_rcv_skb+0x5b/0x110
[ 112.241772] netlink_unicast+0x1a6/0x290
[ 112.241772] netlink_sendmsg+0x223/0x490
[ 112.241772] __sys_sendto+0x1df/0x1f0
[ 112.241772] __x64_sys_sendto+0x24/0x30
[ 112.241772] do_syscall_64+0x83/0x190
[ 112.241772] entry_SYSCALL_64_after_hwframe+0x78/0x80
[ 112.245994] ------------[ cut here ]------------
[ 112.246650] kmem_cache_destroy batadv_tl_cache: Slab cache still has objects when called from batadv_tt_cache_destroy+0x15/0x60 [batman_adv]
[ 112.246668] WARNING: CPU: 1 PID: 776 at mm/slab_common.c:493 kmem_cache_destroy+0x14d/0x160
[ 112.249584] Modules linked in: veth batman_adv(OE-) cfg80211 rfkill bridge stp llc libcrc32c crc32c_generic crc16 rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver binfmt_misc pcspkr button joydev evdev serio_raw loop dm_mod efi_pstore nfnetlink vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vsock vmw_vmci qemu_fw_cfg ip_tables x_tables autofs4 nfsv3 nfs_acl nfs lockd grace sunrpc 9pnet_rdma rdma_cm iw_cm ib_cm ib_core configfs 9p netfs ata_generic ata_piix libata psmouse scsi_mod 9pnet_virtio i2c_piix4 9pnet e1000 scsi_common floppy crypto_simd cryptd
[ 112.256555] CPU: 1 PID: 776 Comm: rmmod Tainted: G B OE 6.8.12-amd64 #1 Debian 6.8.12-1
[ 112.258457] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 112.260410] RIP: 0010:kmem_cache_destroy+0x14d/0x160
[ 112.261687] Code: 00 eb be 5b 5d 41 5c 41 5d c3 cc cc cc cc 48 8b 53 60 48 8b 4c 24 20 48 c7 c6 60 d5 e3 98 48 c7 c7 b8 ec 2d 99 e8 43 0d d8 ff <0f> 0b e9 e2 fe ff ff c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90
[ 112.265219] RSP: 0018:ffffb3b2806e7e48 EFLAGS: 00010282
[ 112.266044] RAX: 0000000000000000 RBX: ffff93f4270a2640 RCX: 0000000000000027
[ 112.267157] RDX: ffff93f43c521708 RSI: 0000000000000001 RDI: ffff93f43c521700
[ 112.268268] RBP: 000055db9018e7d8 R08: 0000000000000000 R09: ffffb3b2806e7cd8
[ 112.269418] R10: ffffb3b2806e7cd0 R11: 0000000000000003 R12: 0000000080012d00
[ 112.270572] R13: ffffb3b2806e7f58 R14: 0000000000000000 R15: 0000000000000000
[ 112.271699] FS: 00007f2ac8308440(0000) GS:ffff93f43c500000(0000) knlGS:0000000000000000
[ 112.273001] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 112.273923] CR2: 00005584ef830110 CR3: 000000000787c000 CR4: 00000000000006f0
[ 112.275050] Call Trace:
[ 112.275464] <TASK>
[ 112.275810] ? kmem_cache_destroy+0x14d/0x160
[ 112.276518] ? __warn+0x81/0x130
[ 112.277043] ? kmem_cache_destroy+0x14d/0x160
[ 112.277730] ? report_bug+0x171/0x1a0
[ 112.278315] ? prb_read_valid+0x1b/0x30
[ 112.278919] ? handle_bug+0x3c/0x80
[ 112.279467] ? exc_invalid_op+0x17/0x70
[ 112.280071] ? asm_exc_invalid_op+0x1a/0x20
[ 112.280741] ? kmem_cache_destroy+0x14d/0x160
[ 112.281603] ? kmem_cache_destroy+0x14d/0x160
[ 112.282489] batadv_tt_cache_destroy+0x15/0x60 [batman_adv]
[ 112.283373] __do_sys_delete_module+0x1d5/0x320
[ 112.284080] do_syscall_64+0x83/0x190
[ 112.284696] ? do_syscall_64+0x8f/0x190
[ 112.285315] ? exc_page_fault+0x7f/0x180
[ 112.285970] entry_SYSCALL_64_after_hwframe+0x78/0x80
[ 112.286768] RIP: 0033:0x7f2ac8434977
[ 112.287355] Code: 73 01 c3 48 8b 0d a9 94 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 79 94 0c 00 f7 d8 64 89 01 48
[ 112.290282] RSP: 002b:00007ffe0adf6138 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ 112.291465] RAX: ffffffffffffffda RBX: 000055db9018e770 RCX: 00007f2ac8434977
[ 112.292595] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055db9018e7d8
[ 112.293724] RBP: 0000000000000000 R08: 1999999999999999 R09: 0000000000000000
[ 112.294863] R10: 00007f2ac84a6ac0 R11: 0000000000000206 R12: 00007ffe0adf6390
[ 112.295982] R13: 000055db9018e770 R14: 000055db9018d2a0 R15: 0000000000000000
[ 112.297103] </TASK>
[ 112.297465] ---[ end trace 0000000000000000 ]---
```
So far, after some debugging, the actual cause for this could
not immediately be found within the batman-adv code.
Therefore reverting this for now until the underlying issue can be
found and better understood.
Some additional debugging information and discussions can be found
on our Redmine bugtracker, linked below.
Link: https://www.open-mesh.org/issues/428
Fixes: 537db05da2ca ("batman-adv: prefer kfree_rcu() over call_rcu() with free-only callbacks")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
The spec doesn't mandate that the first two double words (aka results)
for the command queue entry need to be set to 0 when they are not
used (not specified). Though, the target implemention returns 0 for TCP
and FC but not for RDMA.
Let's make RDMA behave the same and thus explicitly initializing the
result field. This prevents leaking any data from the stack.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The id override functions return a status which is not propagated to the
caller.
Fixes: c1fef73f793b ("nvmet: add passthru code to process commands")
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
If a discard request needs to be retried, and that retry may fail before
a new special payload is added, a double free will result. Clear the
RQF_SPECIAL_LOAD when the request is cleaned.
Signed-off-by: Chunguang Xu <chunguang.xu@shopee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add debounce time in headset type detection for better performance.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/7e502e9a9dd94122a1b60deb5ceb60fb@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the ipc_prepare() callback fails for a module instance, on error rewind
we must skip the ipc_unprepare() call for ones that has positive use count.
The positive use count means that the module instance is in active use, it
cannot be unprepared.
The issue affects capture direction paths with branches (single dai with
multiple PCMs), the affected widgets are in the shared part of the paths.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20240612121203.15468-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Jai Luthra <j-luthra@ti.com>:
This series fixes two patches:
1. Fix the dmaengine API usage by calling dmaengine_synchronize() after
dmaengine_terminate_async() when xrun events occur in application
2. Use the McASP AFIFO property from DT to refine the period size,
instead of hardcoding minimum to 64 samples
|
|
data
This patch prevents from registering thermal entries and letting the
driver misbehave if efuse data is invalid. A device is not properly
calibrated if the golden temperature is zero.
Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240604-mtk-thermal-calib-check-v2-1-8f258254051d@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The user mapped intergity is copied back and unpinned by
bio_integrity_free which is a low-level routine. Do it via the submitter
rather than doing it in the low-level block layer code, to split the
submitter side from the consumer side of the bio.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240610111144.14647-1-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Friedrich Weber reported a kernel crash problem and bisected to commit
81ada09cc25e ("blk-flush: reuse rq queuelist in flush state machine").
The root cause is that we use "list_move_tail(&rq->queuelist, pending)"
in the PREFLUSH/POSTFLUSH sequences. But rq->queuelist.next == xxx since
it's popped out from plug->cached_rq in __blk_mq_alloc_requests_batch().
We don't initialize its queuelist just for this first request, although
the queuelist of all later popped requests will be initialized.
Fix it by changing to use "list_add_tail(&rq->queuelist, pending)" so
rq->queuelist doesn't need to be initialized. It should be ok since rq
can't be on any list when PREFLUSH or POSTFLUSH, has no move actually.
Please note the commit 81ada09cc25e ("blk-flush: reuse rq queuelist in
flush state machine") also has another requirement that no drivers would
touch rq->queuelist after blk_mq_end_request() since we will reuse it to
add rq to the post-flush pending list in POSTFLUSH. If this is not true,
we will have to revert that commit IMHO.
This updated version adds "list_del_init(&rq->queuelist)" in flush rq
callback since the dm layer may submit request of a weird invalid format
(REQ_FSEQ_PREFLUSH | REQ_FSEQ_POSTFLUSH), which causes double list_add
if without this "list_del_init(&rq->queuelist)". The weird invalid format
problem should be fixed in dm layer.
Reported-by: Friedrich Weber <f.weber@proxmox.com>
Closes: https://lore.kernel.org/lkml/14b89dfb-505c-49f7-aebb-01c54451db40@proxmox.com/
Closes: https://lore.kernel.org/lkml/c9d03ff7-27c5-4ebd-b3f6-5a90d96f35ba@proxmox.com/
Fixes: 81ada09cc25e ("blk-flush: reuse rq queuelist in flush state machine")
Cc: Christoph Hellwig <hch@lst.de>
Cc: ming.lei@redhat.com
Cc: bvanassche@acm.org
Tested-by: Friedrich Weber <f.weber@proxmox.com>
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240608143115.972486-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For zoned block devices using zone write plugging, an rcu_barrier() call
is needed in disk_free_zone_resources() to synchronize freeing of zone
write plugs and the destrution of the mempool used to allocate the
plugs. The barrier call does slow down a little teardown of zoned block
devices but should not affect teardown of regular block devices or zoned
block devices that do not use zone write plugging (e.g. zoned DM devices
that do not require zone append emulation).
Modify disk_free_zone_resources() to return early if we do not have a
mempool to start with, that is, if the device does not use zone write
plugging. This avoids the costly rcu_barrier() and speeds up disk
teardown.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240607002126.104227-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the initial set of device IDs for Battlemage.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240603145430.1260817-1-balasubramani.vivekanandan@intel.com
|
|
Clang static checker (scan-build) warning:
block/sed-opal.c:line 317, column 3
Value stored to 'ret' is never read.
Fix this problem by returning the error code when keyring_search() failed.
Otherwise, 'key' will have a wrong value when 'kerf' stores the error code.
Fixes: 3bfeb6125664 ("block: sed-opal: keyring support for SED keys")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20240611073659.429582-1-suhui@nfschina.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is a couple of outdated addresses that are still visible
in the Git history, add them to .mailmap.
While at it, replace one in the comment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This will help debug register read/writes and provides
a way to trace all the mmio transactions.
v2: Fix kunit error
v3: Print devid to help in multi-gpu setup
v3: rebase and use variable sized variant to display
dev name(Gustavo)
v4: Pass single argument to __asign_str to fix kunit error
v5: Remove unrelated include xe_tile.h and remove cast in trace
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607182943.3572524-7-radhakrishna.sripada@intel.com
|
|
In multi-gpu environments it is important to know the device
gt events belongs to. The tracing information includes the device_id
to indicate the device the event is associated with.
v2: Use variable sized variant to display dev name(Gustavo)
v3: Pass single argument to __assign_str to fix kunit error
v4: Remove unused sting_helper library include
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607182943.3572524-6-radhakrishna.sripada@intel.com
|
|
In multi-gpu environments it is important to know the device
guc txn belongs to. The tracing information includes the device_id
to indicate the device the event is associated with.
v2: Use variable sized variant to display dev name(Gustavo)
v3: Pass single argument to __assign_str to fix kunit error
v4: Minor formatting tweaks
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607182943.3572524-5-radhakrishna.sripada@intel.com
|
|
In multi-gpu environments it is important to know the device
bo/vm belongs to. The tracing information includes the device_id
to indicate the device the event is associated with.
v2: Use variable sized variant to display dev name(Gustavo)
v3: Pass single argument to __assign_str to fix kunit error
v4: Minor cleanups(Gustavo)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607182943.3572524-4-radhakrishna.sripada@intel.com
|
|
xe_trace.h is starting to get over crowded. Move the traces
related to guc to its own file.
v2: Update year in License(Gustavo)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607182943.3572524-3-radhakrishna.sripada@intel.com
|
|
xe_trace.h is starting to get over crowded. Move the traces
related to bo, vm, vma's to its own file.
v2: Update year in License(Gustavo)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607182943.3572524-2-radhakrishna.sripada@intel.com
|
|
When an I2C adapter acts only as a slave, it should not claim to
support I2C master capabilities.
Fixes: 5b6d721b266a ("i2c: designware: enable SLAVE in platform module")
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Luis Oliveira <lolivei@synopsys.com>
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Jan Dabros <jsd@semihalf.com>
Cc: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
When an I2C adapter acts only as a slave, it should not claim to
support I2C master capabilities.
Fixes: 9d3ca54b550c ("i2c: at91: added slave mode support")
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Juergen Fitschen <me@jue.yt>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Cc: Andi Shyti <andi.shyti@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Needed to get tracing cleanup and add mmio tracing series.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
5 minutes is too short for a regular user to search and understand
what he needs to do to report capture devcoredump and report a bug to
us, so here increasing this timeout to 1 hour.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611174716.72660-2-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add function to set a custom coredump timeout.
For Xe driver usage, current 5 minutes timeout may be too short for
users to search and understand what needs to be done to capture
coredump to report bugs.
We have plans to automate(distribute a udev script) it but at the end
will be up to distros and users to pack it so having a option to
increase the timeout is a safer option.
v2:
- replace dev_coredump_timeout_set() by dev_coredumpm_timeout() (Mukesh)
v3:
- make dev_coredumpm() static inline (Johannes)
v5:
- rename DEVCOREDUMP_TIMEOUT -> DEVCD_TIMEOUT to avoid redefinition
in include/net/bluetooth/coredump.h
v6:
- fix definition of dev_coredumpm_timeout() when CONFIG_DEV_COREDUMP
is disabled
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611174716.72660-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Ramp values are inverted. This caused wrong values written to register
when ramp values were defined in device tree.
Invert values in table to fix this.
Signed-off-by: Kalle Niemi <kaleposti@gmail.com>
Fixes: 1aad39001e85 ("regulator: Support ROHM BD71815 regulators")
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/ZmmJXtuVJU6RgQAH@latitude5580
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
mipi_dsi_msleep should be modified to accept ctx as a pointer and the
function call should be adjusted accordingly.
Fixes: a2ab7cb169da ("drm/panel: himax-hx83102: use wrapped MIPI DCS functions")
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240612133550.473279-2-tejasvipin76@gmail.com
[narmstrong: fixed subject and fixes tag]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612133550.473279-2-tejasvipin76@gmail.com
|
|
ctx would be better off treated as a pointer to account for most of its
usage so far, and brackets should be added to account for operator
precedence for correct evaluation.
Fixes: f79d6d28d8fe ("drm/mipi-dsi: wrap more functions for streamline handling")
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240612133550.473279-3-tejasvipin76@gmail.com
[narmstrong: fixed fixes tag]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612133550.473279-3-tejasvipin76@gmail.com
|
|
After recent changes in intel_pstate, global.turbo_disabled is only set
at the initialization time and never changed. However, it turns out
that on some systems the "turbo disabled" bit in MSR_IA32_MISC_ENABLE,
the initial state of which is reflected by global.turbo_disabled, can be
flipped later and there should be a way to take that into account (other
than checking that MSR every time the driver runs which is costly and
useless overhead on the vast majority of systems).
For this purpose, notice that before the changes in question,
store_no_turbo() contained a turbo_is_disabled() check that was used
for updating global.turbo_disabled if the "turbo disabled" bit in
MSR_IA32_MISC_ENABLE had been flipped and that functionality can be
restored. Then, users will be able to reset global.turbo_disabled
by writing 0 to no_turbo which used to work before on systems with
flipping "turbo disabled" bit.
This guarantees the driver state to remain in sync, but READ_ONCE()
annotations need to be added in two places where global.turbo_disabled
is accessed locklessly, so modify the driver to make that happen.
Fixes: 0940f1a8011f ("cpufreq: intel_pstate: Do not update global.turbo_disabled after initialization")
Closes: https://lore.kernel.org/linux-pm/bf3ebf1571a4788e97daf861eb493c12d42639a3.camel@xry111.site
Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reported-by: Xi Ruoyao <xry111@xry111.site>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When a monitor interface is started, ieee80211_recalc_offload() is
called and 802.11 encapsulation offloading support get disabled so
monitor interface could get native wifi frames directly. But when
this interface is stopped there is no need to keep the 802.11
encpasulation offloading off.
This call ieee80211_recalc_offload() when monitor interface is stopped
so 802.11 encapsulation offloading gets re-activated if possible.
Fixes: 6aea26ce5a4c ("mac80211: rework tx encapsulation offload API")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://msgid.link/840baab454f83718e6e16fd836ac597d924e85b9.1716048326.git.repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The control and ack force-wake registers are not accessible for
the VF drivers. To avoid changing existing code logic that tracks
woken domains, simply ignore all attempts to access control or ack
registers if we are running as a VF driver.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611163537.1944-6-michal.wajdeczko@intel.com
|
|
The code of 'control' and 'wait' force-wake operations are very
similar for both 'wake' and 'sleep' cases. Add helpers to maximize
code reuse.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611163537.1944-5-michal.wajdeczko@intel.com
|
|
For debug purposes it might be useful to look at the values of the
force-wake ack registers in case wake/sleep operations failures.
Move xe_gt_notice() from the caller to the helper function, where
we have the latest value of force-wake ack register available.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611163537.1944-4-michal.wajdeczko@intel.com
|
|
It's too simple to deserve separate helper.
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611163537.1944-3-michal.wajdeczko@intel.com
|
|
If possible, we should prefer xe_gt_notice() over drm_notice().
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611163537.1944-2-michal.wajdeczko@intel.com
|
|
The flags variable is incorrectly checked while it is still cleared and
has not been assigned any value yet.
Fix it.
Fixes: a615323f7f90 ("wifi: iwlwifi: mvm: always apply 6 GHz probe limitations")
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140556.291c33f9a283.Id651fe69828aebce177b49b2316c5780906f1b37@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For using the ROC command, check that the ROC version
is *greater or equal* to 3, rather than *equal* to 3.
The ROC version was added to the TLV starting from
version 3.
Fixes: 67ac248e4db0 ("wifi: iwlwifi: mvm: implement ROC version 3")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.93d86cd188ad.Iceadef5a2f3cfa4a127e94a0405eba8342ec89c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Unlock the mvm mutex before returning from a
function with the mutex locked.
Fixes: a1efeb823084 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.96cb956db4af.Ib468cbad38959910977b5581f6111ab0afae9880@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In 'cfg80211_wext_siwscan()', add extra check whether number of
channels passed via 'ioctl(sock, SIOCSIWSCAN, ...)' doesn't exceed
IW_MAX_FREQUENCIES and reject invalid request with -EINVAL otherwise.
Reported-by: syzbot+253cd2d2491df77c93ac@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=253cd2d2491df77c93ac
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://msgid.link/20240531032010.451295-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In nl80211, we always set the ssids of a scan request to
NULL when n_ssids==0 (passive scan). Drivers have relied
on this behaviour in the past, so we fixed it in 6 GHz
scan requests as well, and added a warning so we'd have
assurance the API would always be called that way.
syzbot found that wext doesn't ensure that, so we reach
the check and trigger the warning. Fix the wext code to
set the ssids pointer to NULL when there are none.
Reported-by: syzbot+cd6135193ba6bb9ad158@syzkaller.appspotmail.com
Fixes: f7a8b10bfd61 ("wifi: cfg80211: fix 6 GHz scan request building")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In order to let bridge chains implement HDMI connector infrastructure,
add necessary glue code to the drm_bridge_connector. In case there is a
bridge that sets DRM_BRIDGE_OP_HDMI, drm_bridge_connector will register
itself as a HDMI connector and provide proxy drm_connector_hdmi_funcs
implementation.
Note, to simplify implementation, there can be only one bridge in a
chain that sets DRM_BRIDGE_OP_HDMI. Setting more than one is considered
an error. This limitation can be lifted later, if the need arises.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607-bridge-hdmi-connector-v5-3-ab384e6021af@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
