| Age | Commit message (Collapse) | Author |
|---|
|
During an eeh call to cxl_remove can result in double free_irq of
psl,slice interrupts. This can happen if perst_reloads_same_image == 1
and call to cxl_configure_adapter() fails during slot_reset
callback. In such a case we see a kernel oops with following back-trace:
Oops: Kernel access of bad area, sig: 11 [#1]
Call Trace:
free_irq+0x88/0xd0 (unreliable)
cxl_unmap_irq+0x20/0x40 [cxl]
cxl_native_release_psl_irq+0x78/0xd8 [cxl]
pci_deconfigure_afu+0xac/0x110 [cxl]
cxl_remove+0x104/0x210 [cxl]
pci_device_remove+0x6c/0x110
device_release_driver_internal+0x204/0x2e0
pci_stop_bus_device+0xa0/0xd0
pci_stop_and_remove_bus_device+0x28/0x40
pci_hp_remove_devices+0xb0/0x150
pci_hp_remove_devices+0x68/0x150
eeh_handle_normal_event+0x140/0x580
eeh_handle_event+0x174/0x360
eeh_event_handler+0x1e8/0x1f0
This patch fixes the issue of double free_irq by checking that
variables that hold the virqs (err_hwirq, serr_hwirq, psl_virq) are
not '0' before un-mapping and resetting these variables to '0' when
they are un-mapped.
Cc: stable@vger.kernel.org
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Currently tsk->thread.load_tm is not initialized in the task creation
and can contain garbage on a new task.
This is an undesired behaviour, since it affects the timing to enable
and disable the transactional memory laziness (disabling and enabling
the MSR TM bit, which affects TM reclaim and recheckpoint in the
scheduling process).
Fixes: 5d176f751ee3 ("powerpc: tm: Enable transactional memory (TM) lazily for userspace")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The description of the CSI_SEL bit in the i.MX6 reference manual is
incorrect. It states "This bit defines which CSI is the input to the
IC. This bit is effective only if IC_INPUT is bit cleared".
From experiment it was found this is in fact not correct. The CSI_SEL
bit selects which CSI is input to _both_ the VDIC _and_ the IC. If the
IC_INPUT bit is set so that the IC is receiving from the VDIC, the IC
ignores the CSI_SEL bit, but CSI_SEL still selects which CSI the VDIC
receives from in that case.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Not having an endpoint bound in DT should not cause a failure here,
there are fallbacks. So explicitly accept a missing endpoint.
This behavior change was introduced by refactoring in drm_of parsing
code and it should not require dts changes.
In particular this fixes imx6qdl-sabreauto boards.
Link: https://lists.freedesktop.org/archives/dri-devel/2017-May/141233.html
Fixes: ebc944613567 ("drm: convert drivers to use drm_of_find_panel_or_bridge")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
By setting the SFTRST bit, the PRE will be held in the lowest power state
with clocks to the internal blocks gated. When external clock gating is
used (from the external clock controller, or by setting the CLKGATE bit)
the PRE will sporadically fail to start.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Fixes: d2a34232580a ("gpu: ipu-v3: add driver for Prefetch Resolve Engine")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
git://anongit.freedesktop.org/git/drm-misc into drm-fixes
Core Changes:
- Grab locks in drm_atomic_helper_resume() (Daniel)
- Fix oops when unplugging USB device (expand cleanup in drm_unplug_dev) (Hans)
Driver Changes:
- rockchip: Don't output 10-bit format to 8-bit encoders (Mark)
Cc: Mark yao <mark.yao@rock-chips.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans de Goede <hdegoede@redhat.com>
* tag 'drm-misc-fixes-2017-06-02' of git://anongit.freedesktop.org/git/drm-misc:
drm: Fix oops + Xserver hang when unplugging USB drm devices
drm: Fix locking in drm_atomic_helper_resume
drm/rockchip: Correct vop out_mode configure
|
|
4 nouveau regression fixes.
* 'linux-4.12' of git://github.com/skeggsb/linux:
drm/nouveau/tmr: fully separate alarm execution/pending lists
drm/nouveau: enable autosuspend only when it'll actually be used
drm/nouveau: replace multiple open-coded runpm support checks with function
drm/nouveau/kms/nv50: add null check before pointer dereference
|
|
Reusing the list_head for both is a bad idea. Callback execution is done
with the lock dropped so that alarms can be rescheduled from the callback,
which means that with some unfortunate timing, lists can get corrupted.
The execution list should not require its own locking, the single function
that uses it can only be called from a single context.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
|
|
This prevents a deadlock that somehow results from the suspend() ->
forbid() -> resume() callchain.
[ 125.266960] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 1
[ 370.120872] INFO: task kworker/4:1:77 blocked for more than 120 seconds.
[ 370.120920] Tainted: G O 4.12.0-rc3 #20
[ 370.120947] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 370.120982] kworker/4:1 D13808 77 2 0x00000000
[ 370.120998] Workqueue: pm pm_runtime_work
[ 370.121004] Call Trace:
[ 370.121018] __schedule+0x2bf/0xb40
[ 370.121025] ? mark_held_locks+0x5f/0x90
[ 370.121038] schedule+0x3d/0x90
[ 370.121044] rpm_resume+0x107/0x870
[ 370.121052] ? finish_wait+0x90/0x90
[ 370.121065] ? pci_pm_runtime_resume+0xa0/0xa0
[ 370.121070] pm_runtime_forbid+0x4c/0x60
[ 370.121129] nouveau_pmops_runtime_suspend+0xaf/0xc0 [nouveau]
[ 370.121139] pci_pm_runtime_suspend+0x5f/0x170
[ 370.121147] ? pci_pm_runtime_resume+0xa0/0xa0
[ 370.121152] __rpm_callback+0xb9/0x1e0
[ 370.121159] ? pci_pm_runtime_resume+0xa0/0xa0
[ 370.121166] rpm_callback+0x24/0x80
[ 370.121171] ? pci_pm_runtime_resume+0xa0/0xa0
[ 370.121176] rpm_suspend+0x138/0x6e0
[ 370.121192] pm_runtime_work+0x7b/0xc0
[ 370.121199] process_one_work+0x253/0x6a0
[ 370.121216] worker_thread+0x4d/0x3b0
[ 370.121229] kthread+0x133/0x150
[ 370.121234] ? process_one_work+0x6a0/0x6a0
[ 370.121238] ? kthread_create_on_node+0x70/0x70
[ 370.121246] ret_from_fork+0x2a/0x40
[ 370.121283]
Showing all locks held in the system:
[ 370.121291] 2 locks held by kworker/4:1/77:
[ 370.121298] #0: ("pm"){.+.+.+}, at: [<ffffffffac0d3530>] process_one_work+0x1d0/0x6a0
[ 370.121315] #1: ((&dev->power.work)){+.+.+.}, at: [<ffffffffac0d3530>] process_one_work+0x1d0/0x6a0
[ 370.121330] 1 lock held by khungtaskd/81:
[ 370.121333] #0: (tasklist_lock){.+.+..}, at: [<ffffffffac10fc8d>] debug_show_all_locks+0x3d/0x1a0
[ 370.121355] 1 lock held by dmesg/1639:
[ 370.121358] #0: (&user->lock){+.+.+.}, at: [<ffffffffac124b6d>] devkmsg_read+0x4d/0x360
[ 370.121377] =============================================
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Add null check before dereferencing pointer asyc
Addresses-Coverity-ID: 1397932
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The new per-cpu counter for writes_pending is initialised in
md_alloc(), which is not called by dm-raid.
So dm-raid fails when md_write_start() is called.
Move the initialization to the personality modules
that need it. This way it is always initialised when needed,
but isn't unnecessarily initialized (requiring memory allocation)
when the personality doesn't use writes_pending.
Reported-by: Heinz Mauelshagen <heinzm@redhat.com>
Fixes: 4ad23a976413 ("MD: use per-cpu counter for writes_pending")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"Two cgroup fixes. One to address RCU delay of cpuset removal affecting
userland visible behaviors. The other fixes a race condition between
controller disable and cgroup removal"
* 'for-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: consider dying css as offline
cgroup: Prevent kill_css() from being called more than once
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
- Revert of sata_mv devm_ioremap_resource() conversion. It made init
fail if there are overlapping resources which led to detection
failures on some setups.
- A workaround for an Acer laptop which sometimes reports corrupt port
map.
- Other non-critical fixes.
* 'for-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata: fix error checking in in ata_parse_force_one()
Revert "ata: sata_mv: Convert to devm_ioremap_resource()"
ata: libahci: properly propagate return value of platform_get_irq()
ata: sata_rcar: Handle return value of clk_prepare_enable
ahci: Acer SA5-271 SSD Not Detected Fix
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
Fixes for 4.12:
* Some memory leaks;
* IBSS support;
* Some bugzilla bugs;
* Some runtime PM fixes;
* Rate-scaling issues;
* Some locking problems;
|
|
Sending host command with CMD_WANT_SKB flag demands the release of the
response buffer with iwl_free_resp function.
The patch adds the memory release in all the relevant places
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
In a previous commit, we removed support for API versions earlier than
22 for these NICs. By mistake, the *_UCODE_API_MIN definitions were
set to 17. Fix that.
Fixes: 4b87e5af638b ("iwlwifi: remove support for fw older than -17 and -22")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Clear the struct so that all reserved fields are zero when we
send the struct down to the device.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
The iwl_mvm_remove_sta_key() function handles removing a key when the
sta doesn't exist anymore. Mistakenly, this was changed to return an
error while fixing another bug.
If the mvm_sta doesn't exist, we continue normally, but just don't try
to remove the igtk key.
Fixes: cd4d23c1ea9b ("iwlwifi: mvm: Fix removal of IGTK")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
We only need to handle d0i3 entry and exit during suspend resume if
system_pm is set to IWL_PLAT_PM_MODE_D0I3, otherwise d0i3 entry
failures will cause suspend to fail.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=194791
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
When we want to stop the recording of the firmware debug
and restart it later without reloading the firmware we
don't need to resend the configuration that comes with
host commands.
Sending those commands confused the hardware and led to
an NMI 0x66.
Change the flow as following:
* read the relevant registers (DBGC_IN_SAMPLE, DBGC_OUT_CTRL)
* clear those registers
* wait for the hardware to complete its write to the buffer
* get the data
* restore the value of those registers (to restart the
recording)
For early start (where the configuration is already
compiled in the firmware), we don't need to set those
registers after the firmware has been loaded, but only
when we want to restart the recording without having
restarted the firmware.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
The ucode_loaded check should be under the mutex, since it can
otherwise change state after we looked at it and before we got
the mutex. Fix that.
Fixes: 5c89e7bc557e ("iwlwifi: mvm: add registration to cooling device")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Allow working IBSS also when working in DQA mode.
This is done by setting it to treat the queues the
same as a BSS AP treats the queues.
Fixes: 7948b87308a4 ("iwlwifi: mvm: enable dynamic queue allocation mode")
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
During d0i3 flow we flush all the queue except from the command queue.
Currently, in this flow the command queue is hard coded to 9.
In DQA the command queue number has changed from 9 to 0.
Fix that.
This fixes a problem in runtime PM resume flow.
Fixes: 097129c9e625 ("iwlwifi: mvm: move cmd queue to be #0 in dqa mode")
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Up until now, the driver was comparing the rate reported by the FW and
the rate of the latest LQ command to avoid processing data belonging
to the old LQ command. Recently, FW changed the meaning of the initial
rate field in tx response and it holds the actual rate (which is not
necessarily the initial rate of LQ's rate table). Use instead LQ cmd
color to be able to filter out tx responses/BA notifications which
where sent during earlier LQ commands' time frame.
This fixes some throughput degradation in noisy environments.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Reported-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull ARM fixes from Russell King:
"Three fixes this time around:
- Two fixes for noMMU, fixing the decompressor header layout, and
preventing a build error with some configurations.
- Fixing the hyp-stub updates that went in during the merge window
for platforms that use MCPM"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8677/1: boot/compressed: fix decompressor header layout for v7-M
ARM: 8676/1: NOMMU: provide pgprot_device() macro
ARM: 8675/1: MCPM: ensure not to enter __hyp_soft_restart from loopback and cpu_power_down
|
|
In some situations the libdw unwinder stopped working properly. I.e.
with libunwind we see:
~~~~~
heaptrack_gui 2228 135073.400112: 641314 cycles:
e8ed _dl_fixup (/usr/lib/ld-2.25.so)
15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so)
ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0)
608f3 _GLOBAL__sub_I_kdynamicjobtracker.cpp (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0)
f199 call_init.part.0 (/usr/lib/ld-2.25.so)
f2a5 _dl_init (/usr/lib/ld-2.25.so)
db9 _dl_start_user (/usr/lib/ld-2.25.so)
~~~~~
But with libdw and without this patch this sample is not properly
unwound:
~~~~~
heaptrack_gui 2228 135073.400112: 641314 cycles:
e8ed _dl_fixup (/usr/lib/ld-2.25.so)
15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so)
ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0)
~~~~~
Debug output showed me that libdw found a module for the last frame
address, but it thinks it belongs to /usr/lib/ld-2.25.so. This patch
double-checks what libdw sees and what perf knows. If the mappings
mismatch, we now report the elf known to perf. This fixes the situation
above, and the libdw unwinder produces the same stack as libunwind.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20170602143753.16907-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So far the whole stack was thrown away when any error occurred before
the maximum stack depth was unwound. This is actually a very common
scenario though. The stacks that got unwound so far are still
interesting. This removes a large chunk of differences when comparing
perf script output for libunwind and libdw perf unwinding.
E.g. with libunwind:
~~~~~
heaptrack_gui 2228 135073.388524: 479408 cycles:
ffffffff811749ed perf_iterate_ctx ([kernel.kallsyms])
ffffffff81181662 perf_event_mmap ([kernel.kallsyms])
ffffffff811cf5ed mmap_region ([kernel.kallsyms])
ffffffff811cfe6b do_mmap ([kernel.kallsyms])
ffffffff811b0dca vm_mmap_pgoff ([kernel.kallsyms])
ffffffff811cdb0c sys_mmap_pgoff ([kernel.kallsyms])
ffffffff81033acb sys_mmap ([kernel.kallsyms])
ffffffff81631d37 entry_SYSCALL_64_fastpath ([kernel.kallsyms])
192ca mmap64 (/usr/lib/ld-2.25.so)
59a9 _dl_map_object_from_fd (/usr/lib/ld-2.25.so)
83d0 _dl_map_object (/usr/lib/ld-2.25.so)
cda1 openaux (/usr/lib/ld-2.25.so)
1834f _dl_catch_error (/usr/lib/ld-2.25.so)
cfe2 _dl_map_object_deps (/usr/lib/ld-2.25.so)
3481 dl_main (/usr/lib/ld-2.25.so)
17387 _dl_sysdep_start (/usr/lib/ld-2.25.so)
4d37 _dl_start (/usr/lib/ld-2.25.so)
d87 _start (/usr/lib/ld-2.25.so)
heaptrack_gui 2228 135073.388677: 611329 cycles:
1a3e0 strcmp (/usr/lib/ld-2.25.so)
82b2 _dl_map_object (/usr/lib/ld-2.25.so)
cda1 openaux (/usr/lib/ld-2.25.so)
1834f _dl_catch_error (/usr/lib/ld-2.25.so)
cfe2 _dl_map_object_deps (/usr/lib/ld-2.25.so)
3481 dl_main (/usr/lib/ld-2.25.so)
17387 _dl_sysdep_start (/usr/lib/ld-2.25.so)
4d37 _dl_start (/usr/lib/ld-2.25.so)
d87 _start (/usr/lib/ld-2.25.so)
~~~~~
With libdw without this patch:
~~~~~
heaptrack_gui 2228 135073.388524: 479408 cycles:
ffffffff811749ed perf_iterate_ctx ([kernel.kallsyms])
ffffffff81181662 perf_event_mmap ([kernel.kallsyms])
ffffffff811cf5ed mmap_region ([kernel.kallsyms])
ffffffff811cfe6b do_mmap ([kernel.kallsyms])
ffffffff811b0dca vm_mmap_pgoff ([kernel.kallsyms])
ffffffff811cdb0c sys_mmap_pgoff ([kernel.kallsyms])
ffffffff81033acb sys_mmap ([kernel.kallsyms])
ffffffff81631d37 entry_SYSCALL_64_fastpath ([kernel.kallsyms])
heaptrack_gui 2228 135073.388677: 611329 cycles:
~~~~~
With this patch applied, the libdw unwinder will produce the same
output as the libunwind unwinder.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20170601210021.20046-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
On an Ubuntu xenial system, 'perf annotate' says to install powerpc
objdump on a system that already has binutils-powerpc-linux-gnu
installed. Make perf aware of the missing triplet for the
powerpc-linux-gnu target.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170529142754.7fbfb1152fd8f2663de0ea70@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The following tests are failing on powerpc:
# perf test break
18: Breakpoint overflow signal handler : FAILED!
19: Breakpoint overflow sampling : FAILED!
The powerpc kenel so far does not have support to even create
instruction breakpoints using the perf event interface, so those tests
fail early in the config phase.
I added a '->is_supported()' callback to test struct to be able to
disable specific tests. It seems better than putting ifdefs directly to
the test array.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170601205450.GA398@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The decompress_kmodule() decompresses kernel modules in order to load
symbols from it. In the DSO_BINARY_TYPE__BUILD_ID_CACHE case, it needs
the full file path to extract the file extension to determine the
decompression method. But overwriting 'name' will fail the
decompression since it might point to a non-existing old file.
Instead, use dso->long_name for having the correct extension and use the
real filename to decompress.
In the DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP case, both names should
be the same. This allows resolving symbols in the old modules.
Before:
$ perf report -i perf.data.old | grep scsi_mod
0.00% cc1 [scsi_mod] [k] 0x0000000000004aa6
0.00% as [scsi_mod] [k] 0x00000000000099e1
0.00% cc1 [scsi_mod] [k] 0x0000000000009830
0.00% cc1 [scsi_mod] [k] 0x0000000000001b8f
After:
0.00% cc1 [scsi_mod] [k] scsi_handle_queue_ramp_up
0.00% as [scsi_mod] [k] scsi_sg_alloc
0.00% cc1 [scsi_mod] [k] scsi_setup_cmnd
0.00% cc1 [scsi_mod] [k] scsi_get_command
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170531120105.21731-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Like machine__findnew_module_dso(), it should set necessary info for
kernel modules to find symbol info from the file. Factor out
dso__set_module_info() to do it.
This is needed for dso__needs_decompress() to detect such DSOs.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170531120105.21731-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When perf processes build-id event, it creates DSOs with the build-id.
But it didn't set the module short name (like '[module-name]') so when
processing a kernel mmap event of the module, it cannot found the DSO as
it only checks the short names.
That leads for perf to create a same DSO without the build-id info and
it'll lookup the system path even if the DSO is already in the build-id
cache. After kernel was updated, perf cannot find the DSO and cannot
show symbols in it anymore.
You can see this if you have an old data file (w/ old kernel version):
$ perf report -i perf.data.old -v |& grep scsi_mod
build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz : cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1
Failed to open /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz, continuing without symbols
...
The second message didn't show the build-id. With this patch:
$ perf report -i perf.data.old -v |& grep scsi_mod
build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz: cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1
/lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz with build id cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 not found, continuing without symbols
...
Now it shows the build-id but still cannot load the symbol table. This
is a different problem which will be fixed in the next patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170531120105.21731-1-namhyung@kernel.org
[ Fix the build on older compilers (debian <= 8, fedora <= 21, etc) wrt kmod_path var init ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
qos_vport
The Granular QoS per VF feature must be enabled in FW before it can be
used.
Thus, the driver cannot modify a QP's qos_vport value (via the UPDATE_QP FW
command) if the feature has not been enabled -- the FW returns an error if
this is attempted.
Fixes: 08068cd5683f ("net/mlx4: Added qos_vport QP configuration in VST mode")
Signed-off-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix kernel-doc warnings (typo) in drivers/net/phy/phy.c:
..//drivers/net/phy/phy.c:259: warning: No description found for parameter 'features'
..//drivers/net/phy/phy.c:259: warning: Excess function parameter 'feature' description in 'phy_lookup_setting'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We must free allocated skb when genlmsg_put() return fails.
Fixes: 1555d204e743 ("devlink: Support for pipeline debug (dpipe)")
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update tcp.txt to fix mandatory congestion control ops and default
CCA selection. Also, fix comment in tcp.h for undo_cwnd.
Signed-off-by: Anmol Sarma <me@anmolsarma.in>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit c5a2ee7dde89 (cpufreq: intel_pstate: Active mode P-state
limits rework) incorrectly assumed that pstate.turbo_pstate would
always be nonzero for CPU0 in min_perf_pct_min() if
cpufreq_register_driver() had succeeded which may not be the case
in virtualized environments.
If that assumption doesn't hold, it leads to an early crash on boot
in intel_pstate_register_driver(), so add a sanity check to
min_perf_pct_min() to prevent the crash from happening.
Fixes: c5a2ee7dde89 (cpufreq: intel_pstate: Active mode P-state limits rework)
Reported-and-tested-by: Jongman Heo <jongman.heo@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
As reported by Patrice, the header layout of the decompressor is
incorrect when building for v7-M. In this case, the __nop macro
resolves to 'mov r0, r0', which is emitted as a narrow encoding,
resulting in the header data fields to end up at lower offsets than
required.
Given the variety of targets we need to support with the same code,
the startup sequence is a bit of a jumble, and uses instructions
and macros whose encoding widths cannot be specified (badr), or only
exist in a narrow encoding (bx)
So force the use of a wide encoding in __nop, and replace the start
sequence with a simple jump to the label marking the start of code,
preceded by a Thumb2 mode switch if required (using explicit wide
encodings where appropriate). The label itself can be moved to the
start of code [where it belongs] due to the larger range of branch
instructions as compared to adr instructions.
Reported-by: Patrice CHOTARD <patrice.chotard@st.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
NOMMU build leads to the following error:
CC drivers/pci/mmap.o
drivers/pci/mmap.c: In function 'pci_mmap_resource_range':
drivers/pci/mmap.c:60:3: error: implicit declaration of function 'pgprot_device' [-Werror=implicit-function-declaration]
vma->vm_page_prot = pgprot_device(vma->vm_page_prot);
^
cc1: some warnings being treated as errors
scripts/Makefile.build:302: recipe for target 'drivers/pci/mmap.o' failed
make[2]: *** [drivers/pci/mmap.o] Error 1
scripts/Makefile.build:561: recipe for target 'drivers/pci' failed
make[1]: *** [drivers/pci] Error 2
Makefile:1016: recipe for target 'drivers' failed
make: *** [drivers] Error 2
Fix it with support of pgprot_device() macro for NOMMU.
Fixes: 00d2904ffeac ("ARM/PCI: Use generic pci_mmap_resource_range()")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
When PCID is enabled, CR3's PCID bits can change during context
switches, so KVM won't be able to treat CR3 as a per-mm constant any
more.
I structured this like the existing CR4 handling. Under ordinary
circumstances (PCID disabled or if the current PCID and the value
that's already in the VMCS match), then we won't do an extra VMCS
write, and we'll never do an extra direct CR3 read. The overhead
should be minimal.
I disallowed using the new helper in non-atomic context because
PCID support will cause CR3 to stop being constant in non-atomic
process context.
(Frankly, it also scares me a bit that KVM ever treated CR3 as
constant, but it looks like it was okay before.)
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Nadav pointed out that some code used PAGE_SIZE and other code used
PAGE_SHIFT. Use PAGE_SHIFT instead of multiplying or dividing by
PAGE_SIZE.
Requested-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Lazy TLB state is currently managed in a rather baroque manner.
AFAICT, there are three possible states:
- Non-lazy. This means that we're running a user thread or a
kernel thread that has called use_mm(). current->mm ==
current->active_mm == cpu_tlbstate.active_mm and
cpu_tlbstate.state == TLBSTATE_OK.
- Lazy with user mm. We're running a kernel thread without an mm
and we're borrowing an mm_struct. We have current->mm == NULL,
current->active_mm == cpu_tlbstate.active_mm, cpu_tlbstate.state
!= TLBSTATE_OK (i.e. TLBSTATE_LAZY or 0). The current cpu is set
in mm_cpumask(current->active_mm). CR3 points to
current->active_mm->pgd. The TLB is up to date.
- Lazy with init_mm. This happens when we call leave_mm(). We
have current->mm == NULL, current->active_mm ==
cpu_tlbstate.active_mm, but that mm is only relelvant insofar as
the scheduler is tracking it for refcounting. cpu_tlbstate.state
!= TLBSTATE_OK. The current cpu is clear in
mm_cpumask(current->active_mm). CR3 points to swapper_pg_dir,
i.e. init_mm->pgd.
This patch simplifies the situation. Other than perf, x86 stops
caring about current->active_mm at all. We have
cpu_tlbstate.loaded_mm pointing to the mm that CR3 references. The
TLB is always up to date for that mm. leave_mm() just switches us
to init_mm. There are no longer any special cases for mm_cpumask,
and switch_mm() switches mms without worrying about laziness.
After this patch, cpu_tlbstate.state serves only to tell the TLB
flush code whether it may switch to init_mm instead of doing a
normal flush.
This makes fairly extensive changes to xen_exit_mmap(), which used
to look a bit like black magic.
Perf is unchanged. With or without this change, perf may behave a bit
erratically if it tries to read user memory in kernel thread context.
We should build on this patch to teach perf to never look at user
memory when cpu_tlbstate.loaded_mm != current->mm.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The UP asm/tlbflush.h generates somewhat nicer code than the SMP version.
Aside from that, it's fallen quite a bit behind the SMP code:
- flush_tlb_mm_range() didn't flush individual pages if the range
was small.
- The lazy TLB code was much weaker. This usually wouldn't matter,
but, if a kernel thread flushed its lazy "active_mm" more than
once (due to reclaim or similar), it wouldn't be unlazied and
would instead pointlessly flush repeatedly.
- Tracepoints were missing.
Aside from that, simply having the UP code around was a maintanence
burden, since it means that any change to the TLB flush code had to
make sure not to break it.
Simplify everything by deleting the UP code.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Now there's only one copy of the local tlb flush logic for
non-kernel pages on SMP kernels.
The only functional change is that arch_tlbbatch_flush() will now
leave_mm() on the local CPU if that CPU is in the batch and is in
TLBSTATE_LAZY mode.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The local flush path is very similar to the remote flush path.
Merge them.
This is intended to make no difference to behavior whatsoever. It
removes some code and will make future changes to the flushing
mechanics simpler.
This patch does remove one small optimization: flush_tlb_mm_range()
now has an unconditional smp_mb() instead of using MOV to CR3 or
INVLPG as a full barrier when applicable. I think this is okay for
a few reasons. First, smp_mb() is quite cheap compared to the cost
of a TLB flush. Second, this rearrangement makes a bigger
optimization available: with some work on the SMP function call
code, we could do the local and remote flushes in parallel. Third,
I'm planning a rework of the TLB flush algorithm that will require
an atomic operation at the beginning of each flush, and that
operation will replace the smp_mb().
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
On a remote TLB flush, we leave_mm() if we're TLBSTATE_LAZY. For a
local flush_tlb_mm_range(), we leave_mm() if !current->mm. These
are approximately the same condition -- the scheduler sets lazy TLB
mode when switching to a thread with no mm.
I'm about to merge the local and remote flush code, but for ease of
verifying and bisecting the patch, I want the local and remote flush
behavior to match first. This patch changes the local code to match
the remote code.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Rather than passing all the contents of flush_tlb_info to
flush_tlb_others(), pass a pointer to the structure directly. For
consistency, this also removes the unnecessary cpu parameter from
uv_flush_tlb_others() to make its signature match the other
*flush_tlb_others() functions.
This serves two purposes:
- It will dramatically simplify future patches that change struct
flush_tlb_info, which I'm planning to do.
- struct flush_tlb_info is an adequate description of what to do
for a local flush, too, so by reusing it we can remove duplicated
code between local and remove flushes in a future patch.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
[ Fix build warning. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
