summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-19staging: comedi: amplc_pc236: cleanup "find pci device" codeH Hartley Sweeten
For aesthetic reasons, rename the function and pass the comedi_devconfig struct instead of pre-parsing out the bus/slot information. Use for_each_pci_dev() instead of open-coding the loop using pci_get_device(). Consolidate the dev_err messages when a pci device is not found. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: amplc_dio200: store the pci_dev in the comedi_deviceH Hartley Sweeten
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Since the pci_dev is no longer held in the provate data, we can also cleanup the detach a bit. Remove the IS_ENABLED() tests in the detach. If the pci_dev is non NULL it's a PCI device otherwise it's an ISA device. Using IS_ENABLED() to omit the code paths makes the code a bit confusing and doesn't save much. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: amplc_dio200: cleanup "find pci device" codeH Hartley Sweeten
For aesthetic reasons, rename the function and pass the comedi_devconfig struct instead of pre-parsing out the bus/slot information. Use for_each_pci_dev() instead of open-coding the loop using pci_get_device(). Consolidate the dev_err messages when a pci device is not found. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: cb_pcidio: store the pci_dev in the comedi_deviceH Hartley Sweeten
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: cb_pcidio: cleanup "find pci device" codeH Hartley Sweeten
Add a couple local variables to make the tests more concise. Reorder the tests to make the for() loop checking for a matching boardtype quicker. Drop the dev_dbg for a match. It's just add noise. Reword the dev_err when no match is found. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: cb_pcidio: factor out the "find pci device" codeH Hartley Sweeten
Factor the "find pci device" code out of the attach function. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: cb_pcidas: store the pci_dev in the comedi_deviceH Hartley Sweeten
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adv_pci_dio: store the pci_dev in the comedi_deviceH Hartley Sweeten
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adv_pci_dio: cleanup "find pci device" codeH Hartley Sweeten
Add a couple local variables to make the tests more concise. Reorder the tests to make the for() loop checking for a matching boardtype quicker. Drop the dev_dbg message for a match. It's just add noise. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adv_pci_dio: remove CheckAndAllocCard()H Hartley Sweeten
This driver creates a linked list of all the pci devices in the system while it's looking for a match. It's only use is to determine if a device is "free" to use. The pci_is_enabled() helper can give us the same information. Use that instead and remove the linked list. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adv_pci_dio: factor out the "find pci device" codeH Hartley Sweeten
Factor the "find pci device" code out of the attach function. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adv_pci1710: store the pci_dev in the comedi_deviceH Hartley Sweeten
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adv_pci1710: move comedi_pci_enable() into the attachH Hartley Sweeten
Use pci_is_enabled() in the "find pci device" function to determine if the found pci device is not in use and move the comedi_pci_enable() call into the attach. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adv_pci1710: cleanup "find pci device" codeH Hartley Sweeten
Use for_each_pci_dev() instead of open-coding the loop using pci_get_device(). Drop the printk error messages. They just add noise. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adv_pci1710: factor out the "find pci device" codeH Hartley Sweeten
Factor the "find pci device" code out of the attach function. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adv_pci1723: store the pci_dev in the comedi_deviceH Hartley Sweeten
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adv_pci1723: move comedi_pci_enable() into the attachH Hartley Sweeten
Use pci_is_enabled() in the "find pci device" function to determine if the found pci device is not in use and move the comedi_pci_enable() call into the attach. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adv_pci1723: cleanup "find pci device" codeH Hartley Sweeten
Use for_each_pci_dev() instead of open-coding the loop using pci_get_device(). Drop the printk error messages. They just add noise. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adv_pci1723: factor out the "find pci device" codeH Hartley Sweeten
Factor the "find pci device" code out of the attach function. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adl_pci9118: store the pci_dev in the comedi_deviceH Hartley Sweeten
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adl_pci9111: store the pci_dev in the comedi_deviceH Hartley Sweeten
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adl_pci8164: remove the private dataH Hartley Sweeten
The private data is no longer needed by this driver. Remove the struct, devpriv macro, and the allocation. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adl_pci8164: store the pci_dev in the comedi_deviceH Hartley Sweeten
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adl_pci7432: remove the private dataH Hartley Sweeten
The private data is no longer needed by this driver. Remove the struct, devpriv macro, and the allocation. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adl_pci7432: store the pci_dev in the comedi_deviceH Hartley Sweeten
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adl_pci7296: remove the private dataH Hartley Sweeten
The private data is no longer needed by this driver. Remove the struct, devpriv macro, and the allocation. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adl_pci7296: store the pci_dev in the comedi_deviceH Hartley Sweeten
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adl_pci7230: remove the private dataH Hartley Sweeten
The private data is no longer needed by this driver. Remove the struct, devpriv macro, and the allocation. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adl_pci7230: store the pci_dev in the comedi_deviceH Hartley Sweeten
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: adl_pci6208: store the pci_dev in the comedi_deviceH Hartley Sweeten
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: comedi: comedidev.h: introduce comedi_to_pci_dev() helperH Hartley Sweeten
Introduce a wrapper for to_pci_dev() to allow the comedi_pci_drivers to store the pci_dev pointer in the comedi_device hw_dev variable and retrieve it easily. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbot <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull last minute Ceph fixes from Sage Weil: "The important one fixes a bug in the socket failure handling behavior that was turned up in some recent failure injection testing. The other two are minor bug fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: endian bug in rbd_req_cb() rbd: Fix ceph_snap_context size calculation libceph: fix messenger retry
2012-07-19staging/cptm1217: fix checkpatch warningsToshiaki Yamane
The below checkpatch error was fixed, drivers/staging/cptm1217/cp_tm1217.h:5: ERROR: open brace '{' following struct go on the same line Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: csr: remove unneeded PCI dependencyLauri Hintsala
Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging/frontier: fix checkpatch warningsToshiaki Yamane
The below checkpatch warns was fixed, drivers/staging/frontier/tranzport.c:356: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... drivers/staging/frontier/tranzport.c:523: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... drivers/staging/frontier/tranzport.c:696: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... drivers/staging/frontier/alphatrack.c:336: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... drivers/staging/frontier/alphatrack.c:497: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... drivers/staging/frontier/alphatrack.c:568: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging/et131x: fix checkpatch warningsToshiaki Yamane
The below checkpatch warns was fixed, drivers/staging/et131x/et131x.c:2556: WARNING: Prefer pr_info(... to printk(KERN_INFO, ... drivers/staging/et131x/et131x.c:2577: WARNING: Prefer pr_info(... to printk(KERN_INFO, ... drivers/staging/et131x/et131x.c:5189: WARNING: Prefer pr_info(... to printk(KERN_INFO, ... And fixed below, -added pr_fmt -fixed printk formats for dma_addr_t -converted printk to netdev_info Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: sbe-2t3e3: Remove code that will never executeMarcos Paulo de Souza
This patch removes all references of "if 0" blocks in the sbe-2t3e3 driver. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19mm: frontswap: split out function to clear a page outSasha Levin
Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-07-19usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcamsLaurent Pinchart
Most Logitech UVC webcams (both early models that don't advertise UVC compatibility and newer UVC-advertised devices) require the RESET_RESUME quirk. Instead of listing each and every model, match the devices based on the UVC interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19usb: Add quirk detection based on interface informationLaurent Pinchart
When a whole class of devices (possibly from a specific vendor, or across multiple vendors) require a quirk, explictly listing all devices in the class make the quirks table unnecessarily large. Fix this by allowing matching devices based on interface information. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19vme_user.c: remove duplicated includeDuan Jiong
Signed-off-by: Duan Jiong <djduanjiong@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19VME: Prevent D16 cycles being split into 8-bit blocksMartyn Welch
The memcpy_fromio() and memcpy_toio() functions use the __memcpy() function, at least on x86. This function carries out transfers smaller than 32 bits as multiple 8 bit transfers, causing a single (aligned) 16 bit transfer to be split into 2 8 bit transfers which may not be supported by the target VME device. The commit 53059aa05988761a738fa8bc082bbf3c5d4462d1 fixed this for the ca91cx42, however this was not fixed for the tsi148 at the time. This patch uses the same algorithm to fix the tsi148. Reported-by: Daniel Lambert <daniel.lambert@clermont.in2p3.fr> Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19staging: sm7xxfb: fix for "rename smtc_screen_info to smtc_scr_info"Stephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Javier Muñoz <jmunhoz@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19mei: use module_pci_driverTomas Winkler
use module_pci_driver() macro to wrap standard pci module registration into a single line Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19Drivers: hv: Change the hex constant to a decimal constantK. Y. Srinivasan
The hex constant chosen for HV_LINUX_GUEST_ID_HI was offensive, update to use the decimal equivalent instead. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-19Merge branch 'board' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into late/board From "Rafael J. Wysocki" <rjw@sisk.pl>: updates for Renesas ARM-based boards for v3.6. Included are: * Regulator support changes for multiple boards from Guennadi Liakhovetski. * armadillo800eva and kzm9g support updates from Kuninori Morimoto and Tetsuyuki Kobayashi. * GPIO support update for multiple boards from Kuninori Morimoto. * defconfig updates from Magnus Damm and Simon Horman. This is based on the 'soc' branch I've just sent a pull request for and on the following topic branch from the Mark Brown's regulator tree: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git tags/topic/fixed which is requisite for the merge. * 'board' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas: (35 commits) ARM: shmobile: kzm9g: defconfig enable INOTIFY_USER ARM: mach-shmobile: armadillo800eva: defconfig Allow use of armhf userspace ARM: shmobile: armadillo800eva: A3SP domain includes USB ARM: shmobile: armadillo800eva: A4LC domain includes LCDC ARM: shmobile: armadillo800eva: USB Func enables external IRQ mode ARM: mach-shmobile: kzm9d: Add defconfig ARM: mach-shmobile: select the fixed regulator driver on several boards ARM: mach-shmobile: add SDHI2 to the 2.8V fixed regulator consumers on kzm9g ARM: mach-shmobile: add fixed voltage regulators to marzen ARM: mach-shmobile: add fixed voltage regulators to kzm9g ARM: mach-shmobile: add fixed voltage regulators to kzm9d ARM: mach-shmobile: add fixed voltage regulators to kota2 ARM: mach-shmobile: add fixed voltage regulators to g4evm ARM: mach-shmobile: add fixed voltage regulators to bonito ARM: mach-shmobile: add fixed voltage regulators to armadillo800eva ARM: mach-shmobile: add fixed voltage regulators to ap4evb ARM: mach-shmobile: add fixed voltage regulators to ag5evm ARM: mach-shmobile: add 3.3V and 1.8V fixed regulators to mackerel ARM: shmobile: use common extra gpio functions on g4evm ARM: shmobile: use common extra gpio functions on ap4evb ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-19Merge tag 'topic/fixed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into late/board regulator: Fixed voltage regulator registration APIs Some new convenience APIs for registering fixed voltage regulators. * tag 'topic/fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: extend the fixed dummy voltage regulator to accept voltage regulator: support multiple dummy fixed regulators Dependency for renesas/board branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-19Merge branch 'soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into late/soc updates for Renesas ARM-based SoCs for v3.6. Included are: * Updates for the r8a7740, sh73a0 and sh7372 SoCs from Kuninori Morimoto. * Low-level power management code reorganization from Kuninori Morimoto. * Wakeup signaling rework for sh7372 and DT support bits for r8a7740 and sh7377 from Magnus Damm. * Assorted fixes. This branch also includes fixes based on top of v3.5-rc3 that have been already merged into arm-soc and mainline, which are not listed below. * 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas: (43 commits) ARM: shmobile: Fix build problem in pm-sh7372.c for unusual .config ARM: shmobile: Take cpuidle dependencies into account correctly ARM: mach-shmobile: sh7377 generic board support via DT ARM: mach-shmobile: r8a7740 generic board support via DT ARM: shmobile: sh7372: completely switch over to using pm-rmobile API ARM: shmobile: ap4evb: switch to using pm-rmobile API ARM: shmobile: mackerel: switch to using pm-rmobile API ARM: shmobile: sh7372: add pm-rmobile domain support ARM: shmobile: r8a7740: add A4LC pm domain support ARM: shmobile: r8a7740: add A3SP pm domain support ARM: shmobile: r8a7740: add A4S pm domain support ARM: shmobile: r8a7740: fixup: MSEL1CR 7bit control ARM: shmobile: soc-core: add R-mobile PM domain common APIs ARM: shmobile: sh7372 A3SM CPUIdle support ARM: shmobile: Use INTCA with sh7372 A3SM power domain ARM: mach-shmobile: Convert sh_clk_mstp32_register to sh_clk_mstp_register ARM: shmobile: use common DMAEngine definitions on sh7372 ARM: shmobile: use common DMAEngine definitions on sh73a0 ARM: shmobile: sh73a0: add DMAEngine support for MPDMAC ARM: shmobile: sh73a0: add USB clock support ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-19clk: fix compile for OF && !COMMON_CLKRob Herring
With commit 766e6a4ec602d0c107 (clk: add DT clock binding support), compiling with OF && !COMMON_CLK is broken. Reported-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Reported-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-07-19clk: fix clk_get on of_clk_get_by_name return checkShawn Guo
The commit 766e6a4 (clk: add DT clock binding support) plugs device tree clk lookup of_clk_get_by_name into clk_get, and fall on non-DT lookup clk_get_sys if DT lookup fails. The return check on of_clk_get_by_name takes (clk != NULL) as a successful DT lookup. But it's not the case. For any system that does not define clk lookup in device tree, ERR_PTR(-ENOENT) will be returned, and consequently, all the client drivers calling clk_get in their probe functions will fail to probe with error code -ENOENT returned. Fix the issue by checking of_clk_get_by_name return with !IS_ERR(clk), and update of_clk_get and of_clk_get_by_name for !CONFIG_OF build correspondingly. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Tested-by: Marek Vasut <marex@denx.de> Tested-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-23 17:44:32 +0000