summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-22ARC: perf: Accommodate big-endian CPUAlexey Brodkin
8-letter strings representing ARC perf events are stores in two 32-bit registers as ASCII characters like that: "IJMP", "IALL", "IJMPTAK" etc. And the same order of bytes in the word is used regardless CPU endianness. Which means in case of big-endian CPU core we need to swap bytes to get the same order as if it was on little-endian CPU. Otherwise we're seeing the following error message on boot: ------------------------->8---------------------- ARC perf : 8 counters (32 bits), 40 conditions, [overflow IRQ support] sysfs: cannot create duplicate filename '/devices/arc_pct/events/pmji' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3 Stack Trace: arc_unwind_core+0xd4/0xfc dump_stack+0x64/0x80 sysfs_warn_dup+0x46/0x58 sysfs_add_file_mode_ns+0xb2/0x168 create_files+0x70/0x2a0 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/events/core.c:12144 perf_event_sysfs_init+0x70/0xa0 Failed to register pmu: arc_pct, reason -17 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3 Stack Trace: arc_unwind_core+0xd4/0xfc dump_stack+0x64/0x80 __warn+0x9c/0xd4 warn_slowpath_fmt+0x22/0x2c perf_event_sysfs_init+0x70/0xa0 ---[ end trace a75fb9a9837bd1ec ]--- ------------------------->8---------------------- What happens here we're trying to register more than one raw perf event with the same name "PMJI". Why? Because ARC perf events are 4 to 8 letters and encoded into two 32-bit words. In this particular case we deal with 2 events: * "IJMP____" which counts all jump & branch instructions * "IJMPC___" which counts only conditional jumps & branches Those strings are split in two 32-bit words this way "IJMP" + "____" & "IJMP" + "C___" correspondingly. Now if we read them swapped due to CPU core being big-endian then we read "PMJI" + "____" & "PMJI" + "___C". And since we interpret read array of ASCII letters as a null-terminated string on big-endian CPU we end up with 2 events of the same name "PMJI". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-22ARC: [plat-hsdk]: Enable on-boardi SPI ADC ICEugeniy Paltsev
HSDK board has adc108s102 SPI ADC IC installed, enable it. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-22ARC: [plat-hsdk]: Enable on-board SPI NOR flash ICEugeniy Paltsev
HSDK board has sst26wf016b SPI NOR flash IC installed, enable it. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-22xen/netback: cleanup init and deinit codeJuergen Gross
Do some cleanup of the netback init and deinit code: - add an omnipotent queue deinit function usable from xenvif_disconnect_data() and the error path of xenvif_connect_data() - only install the irq handlers after initializing all relevant items (especially the kthreads related to the queue) - there is no need to use get_task_struct() after creating a kthread and using put_task_struct() again after having stopped it. - use kthread_run() instead of kthread_create() to spare the call of wake_up_process(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Paul Durrant <pdurrant@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22KVM: SVM: Fix potential wrong physical id in avic_handle_ldr_updateMiaohe Lin
Guest physical APIC ID may not equal to vcpu->vcpu_id in some case. We may set the wrong physical id in avic_handle_ldr_update as we always use vcpu->vcpu_id. Get physical APIC ID from vAPIC page instead. Export and use kvm_xapic_id here and in avic_handle_apic_id_update as suggested by Vitaly. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22Merge branch 'r8152-phy-firmware'Jakub Kicinski
Hayes Wang says: ==================== Support loading the firmware of the PHY with the type of RTL_FW_PHY_NC. ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22r8152: support firmware of PHY NC for RTL8153AHayes Wang
Support the firmware of PHY NC which is used to fix the issue found for PHY. Currently, only RTL_VER_04, RTL_VER_05, and RTL_VER_06 need it. The order of loading PHY firmware would be RTL_FW_PHY_START RTL_FW_PHY_NC RTL_FW_PHY_STOP The RTL_FW_PHY_START/RTL_FW_PHY_STOP are used to lock/unlock the PHY, and set/clear the patch key from the firmware file. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22r8152: move r8153_patch_request forwardHayes Wang
Move r8153_patch_request() forward for later patch. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22r8152: add checking fw_offset field of struct fw_macHayes Wang
Make sure @fw_offset field of struct fw_mac is more than the size of struct fw_mac. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22r8152: rename fw_type_1 with fw_macHayes Wang
The struct fw_type_1 is used by MAC only, so rename it to a meaningful one. Besides, adjust two messages. Replace "load xxx fail" with "check xxx fail" Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22Merge branch 'misc' into fixesRussell King
2019-10-22cpufreq: Cancel policy update work scheduled before freeingSudeep Holla
Scheduled policy update work may end up racing with the freeing of the policy and unregistering the driver. One possible race is as below, where the cpufreq_driver is unregistered, but the scheduled work gets executed at later stage when, cpufreq_driver is NULL (i.e. after freeing the policy and driver). Unable to handle kernel NULL pointer dereference at virtual address 0000001c pgd = (ptrval) [0000001c] *pgd=80000080204003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP THUMB2 Modules linked in: CPU: 0 PID: 34 Comm: kworker/0:1 Not tainted 5.4.0-rc3-00006-g67f5a8081a4b #86 Hardware name: ARM-Versatile Express Workqueue: events handle_update PC is at cpufreq_set_policy+0x58/0x228 LR is at dev_pm_qos_read_value+0x77/0xac Control: 70c5387d Table: 80203000 DAC: fffffffd Process kworker/0:1 (pid: 34, stack limit = 0x(ptrval)) (cpufreq_set_policy) from (refresh_frequency_limits.part.24+0x37/0x48) (refresh_frequency_limits.part.24) from (handle_update+0x2f/0x38) (handle_update) from (process_one_work+0x16d/0x3cc) (process_one_work) from (worker_thread+0xff/0x414) (worker_thread) from (kthread+0xff/0x100) (kthread) from (ret_from_fork+0x11/0x28) Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> [ rjw: Cancel the work before dropping the QoS requests ] Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-22s390/kaslr: add support for R_390_GLOB_DAT relocation typeGerald Schaefer
Commit "bpf: Process in-kernel BTF" in linux-next introduced an undefined __weak symbol, which results in an R_390_GLOB_DAT relocation type. That is not yet handled by the KASLR relocation code, and the kernel stops with the message "Unknown relocation type". Add code to detect and handle R_390_GLOB_DAT relocation types and undefined symbols. Fixes: 805bc0bc238f ("s390/kernel: build a relocatable kernel") Cc: <stable@vger.kernel.org> # v5.2+ Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-22s390/zcrypt: fix memleak at releaseJohan Hovold
If a process is interrupted while accessing the crypto device and the global ap_perms_mutex is contented, release() could return early and fail to free related resources. Fixes: 00fab2350e6b ("s390/zcrypt: multiple zcrypt device nodes support") Cc: <stable@vger.kernel.org> # 4.19 Cc: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-22ALSA: usb-audio: Fix copy&paste error in the validatorTakashi Iwai
The recently introduced USB-audio descriptor validator had a stupid copy&paste error that may lead to an unexpected overlook of too short descriptors for processing and extension units. It's likely the cause of the report triggered by syzkaller fuzzer. Let's fix it. Fixes: 57f8770620e9 ("ALSA: usb-audio: More validations of descriptor units") Reported-by: syzbot+0620f79a1978b1133fd7@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/s5hsgnkdbsl.wl-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-22tools: gpio: Use !building_out_of_srctree to determine srctreeShuah Khan
make TARGETS=gpio kselftest fails with: Makefile:23: tools/build/Makefile.include: No such file or directory When the gpio tool make is invoked from tools Makefile, srctree is cleared and the current logic check for srctree equals to empty string to determine srctree location from CURDIR. When the build in invoked from selftests/gpio Makefile, the srctree is set to "." and the same logic used for srctree equals to empty is needed to determine srctree. Check building_out_of_srctree undefined as the condition for both cases to fix "make TARGETS=gpio kselftest" build failure. Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-10-22perf/aux: Fix AUX output stoppingAlexander Shishkin
Commit: 8a58ddae2379 ("perf/core: Fix exclusive events' grouping") allows CAP_EXCLUSIVE events to be grouped with other events. Since all of those also happen to be AUX events (which is not the case the other way around, because arch/s390), this changes the rules for stopping the output: the AUX event may not be on its PMU's context any more, if it's grouped with a HW event, in which case it will be on that HW event's context instead. If that's the case, munmap() of the AUX buffer can't find and stop the AUX event, potentially leaving the last reference with the atomic context, which will then end up freeing the AUX buffer. This will then trip warnings: Fix this by using the context's PMU context when looking for events to stop, instead of the event's PMU context. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20191022073940.61814-1-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-22Merge tag 'kvm-ppc-fixes-5.4-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD PPC KVM fix for 5.4 - Fix a bug in the XIVE code which can cause a host crash.
2019-10-22Merge tag 'kvmarm-fixes-5.4-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.4, take #2 Special PMU edition: - Fix cycle counter truncation - Fix cycle counter overflow limit on pure 64bit system - Allow chained events to be actually functional - Correct sample period after overflow
2019-10-22kvm: clear kvmclock MSR on resetPaolo Bonzini
After resetting the vCPU, the kvmclock MSR keeps the previous value but it is not enabled. This can be confusing, so fix it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22KVM: x86: fix bugon.cocci warningskbuild test robot
Use BUG_ON instead of a if condition followed by BUG. Generated by: scripts/coccinelle/misc/bugon.cocci Fixes: 4b526de50e39 ("KVM: x86: Check kvm_rebooting in kvm_spurious_fault()") CC: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22KVM: VMX: Remove specialized handling of unexpected exit-reasonsLiran Alon
Commit bf653b78f960 ("KVM: vmx: Introduce handle_unexpected_vmexit and handle WAITPKG vmexit") introduced specialized handling of specific exit-reasons that should not be raised by CPU because KVM configures VMCS such that they should never be raised. However, since commit 7396d337cfad ("KVM: x86: Return to userspace with internal error on unexpected exit reason"), VMX & SVM exit handlers were modified to generically handle all unexpected exit-reasons by returning to userspace with internal error. Therefore, there is no need for specialized handling of specific unexpected exit-reasons (This specialized handling also introduced inconsistency for these exit-reasons to silently skip guest instruction instead of return to userspace on internal-error). Fixes: bf653b78f960 ("KVM: vmx: Introduce handle_unexpected_vmexit and handle WAITPKG vmexit") Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22selftests: kvm: fix sync_regs_test with newer gccsVitaly Kuznetsov
Commit 204c91eff798a ("KVM: selftests: do not blindly clobber registers in guest asm") was intended to make test more gcc-proof, however, the result is exactly the opposite: on newer gccs (e.g. 8.2.1) the test breaks with ==== Test Assertion Failure ==== x86_64/sync_regs_test.c:168: run->s.regs.regs.rbx == 0xBAD1DEA + 1 pid=14170 tid=14170 - Invalid argument 1 0x00000000004015b3: main at sync_regs_test.c:166 (discriminator 6) 2 0x00007f413fb66412: ?? ??:0 3 0x000000000040191d: _start at ??:? rbx sync regs value incorrect 0x1. Apparently, compile is still free to play games with registers even when they have variables attached. Re-write guest code with 'asm volatile' by embedding ucall there and making sure rbx is preserved. Fixes: 204c91eff798a ("KVM: selftests: do not blindly clobber registers in guest asm") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22selftests: kvm: vmx_dirty_log_test: skip the test when VMX is not supportedVitaly Kuznetsov
vmx_dirty_log_test fails on AMD and this is no surprise as it is VMX specific. Bail early when nested VMX is unsupported. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22selftests: kvm: consolidate VMX support checksVitaly Kuznetsov
vmx_* tests require VMX and three of them implement the same check. Move it to vmx library. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22selftests: kvm: vmx_set_nested_state_test: don't check for VMX support twiceVitaly Kuznetsov
vmx_set_nested_state_test() checks if VMX is supported twice: in the very beginning (and skips the whole test if it's not) and before doing test_vmx_nested_state(). One should be enough. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22KVM: Don't shrink/grow vCPU halt_poll_ns if host side polling is disabledWanpeng Li
Don't waste cycles to shrink/grow vCPU halt_poll_ns if host side polling is disabled. Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22selftests: kvm: synchronize .gitignore to MakefileVitaly Kuznetsov
Because "Untracked files:" are annoying. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUIDJim Mattson
When the RDPID instruction is supported on the host, enumerate it in KVM_GET_SUPPORTED_CPUID. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22Merge tag 'pinctrl-v5.4-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Here is a bunch of pin control fixes. I was lagging behind on this one, some fixes should have come in earlier, sorry about that. Anyways here it is, pretty straight-forward fixes, the Strago fix stand out as something serious affecting a lot of machines. Summary: - Handle multiple instances of Intel chips without complaining. - Restore the Intel Strago DMI workaround - Make the Armada 37xx handle pins over 32 - Fix the polarity of the LED group on Armada 37xx - Fix an off-by-one bug in the NS2 driver - Fix error path for iproc's platform_get_irq() - Fix error path on the STMFX driver - Fix a typo in the Berlin AS370 driver - Fix up misc errors in the Aspeed 2600 BMC support - Fix a stray SPDX tag" * tag 'pinctrl-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: aspeed-g6: Rename SD3 to EMMC and rework pin groups pinctrl: aspeed-g6: Fix UART13 group pinmux pinctrl: aspeed-g6: Make SIG_DESC_CLEAR() behave intuitively pinctrl: aspeed-g6: Fix I3C3/I3C4 pinmux configuration pinctrl: aspeed-g6: Fix I2C14 SDA description pinctrl: aspeed-g6: Sort pins for sanity dt-bindings: pinctrl: aspeed-g6: Rework SD3 function and groups pinctrl: berlin: as370: fix a typo s/spififib/spdifib pinctrl: armada-37xx: swap polarity on LED group pinctrl: stmfx: fix null pointer on remove pinctrl: iproc: allow for error from platform_get_irq() pinctrl: ns2: Fix off by one bugs in ns2_pinmux_enable() pinctrl: bcm-iproc: Use SPDX header pinctrl: armada-37xx: fix control of pins 32 and up pinctrl: cherryview: restore Strago DMI workaround for all versions pinctrl: intel: Allocate IRQ chip dynamic
2019-10-22cpuidle: haltpoll: Take 'idle=' override into accountZhenzhong Duan
Currenly haltpoll isn't aware of the 'idle=' override, the priority is 'idle=poll' > haltpoll > 'idle=halt'. When 'idle=poll' is used, cpuidle driver is bypassed but current_driver in sys still shows 'haltpoll'. When 'idle=halt' is used, haltpoll takes precedence and makes 'idle=halt' have no effect. Add a check to prevent the haltpoll driver from loading if 'idle=' is present. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Co-developed-by: Joao Martins <joao.m.martins@oracle.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-22ACPI: NFIT: Fix unlock on error in scrub_show()Dan Carpenter
We change the locking in this function and forgot to update this error path so we are accidentally still holding the "dev->lockdep_mutex". Fixes: 87a30e1f05d7 ("driver-core, libnvdimm: Let device subsystems add local lockdep coverage") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: 5.3+ <stable@vger.kernel.org> # 5.3+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-22rtl8xxxu: fix RTL8723BU connection failure issue after warm rebootChris Chiu
The RTL8723BU has problems connecting to AP after each warm reboot. Sometimes it returns no scan result, and in most cases, it fails the authentication for unknown reason. However, it works totally fine after cold reboot. Compare the value of register SYS_CR and SYS_CLK_MAC_CLK_ENABLE for cold reboot and warm reboot, the registers imply that the MAC is already powered and thus some procedures are skipped during driver initialization. Double checked the vendor driver, it reads the SYS_CR and SYS_CLK_MAC_CLK_ENABLE also but doesn't skip any during initialization based on them. This commit only tells the RTL8723BU to do full initialization without checking MAC status. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-21Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2019-10-21 This series contains updates to e1000e and igc only. Sasha adds stream control transmission protocol (SCTP) CRC checksum support for igc. Also added S0ix support to the e1000e driver. Then added multicast support by adding the address list to the MTA table and providing the option for IPv6 address for igc. In addition, added receive checksum support to igc as well. Lastly, cleaned up some code that was not fully implemented yet for the VLAN filter table array. v2: Dropped patch 1 & 2 from the original series. Patch 1 is being sent to 'net' tree as a fix and patch 2 implementation needs to be re-worked. Updated the patch to add support for S0ix to fix the reverse Xmas tree issues and made the entry/exit functions void since they constantly returned success. All based on community feedback. v3: Cleaned up patch 4 of the series based on feedback from the community. Cleaned up a stray comma in a code comment and removed the 'inline' of a function that would be inlined by the compiler anyways. ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-21tracing: Fix race in perf_trace_buf initializationPrateek Sood
A race condition exists while initialiazing perf_trace_buf from perf_trace_init() and perf_kprobe_init(). CPU0 CPU1 perf_trace_init() mutex_lock(&event_mutex) perf_trace_event_init() perf_trace_event_reg() total_ref_count == 0 buf = alloc_percpu() perf_trace_buf[i] = buf tp_event->class->reg() //fails perf_kprobe_init() goto fail perf_trace_event_init() perf_trace_event_reg() fail: total_ref_count == 0 total_ref_count == 0 buf = alloc_percpu() perf_trace_buf[i] = buf tp_event->class->reg() total_ref_count++ free_percpu(perf_trace_buf[i]) perf_trace_buf[i] = NULL Any subsequent call to perf_trace_event_reg() will observe total_ref_count > 0, causing the perf_trace_buf to be always NULL. This can result in perf_trace_buf getting accessed from perf_trace_buf_alloc() without being initialized. Acquiring event_mutex in perf_kprobe_init() before calling perf_trace_event_init() should fix this race. The race caused the following bug: Unable to handle kernel paging request at virtual address 0000003106f2003c Mem abort info: ESR = 0x96000045 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000045 CM = 0, WnR = 1 user pgtable: 4k pages, 39-bit VAs, pgdp = ffffffc034b9b000 [0000003106f2003c] pgd=0000000000000000, pud=0000000000000000 Internal error: Oops: 96000045 [#1] PREEMPT SMP Process syz-executor (pid: 18393, stack limit = 0xffffffc093190000) pstate: 80400005 (Nzcv daif +PAN -UAO) pc : __memset+0x20/0x1ac lr : memset+0x3c/0x50 sp : ffffffc09319fc50 __memset+0x20/0x1ac perf_trace_buf_alloc+0x140/0x1a0 perf_trace_sys_enter+0x158/0x310 syscall_trace_enter+0x348/0x7c0 el0_svc_common+0x11c/0x368 el0_svc_handler+0x12c/0x198 el0_svc+0x8/0xc Ramdumps showed the following: total_ref_count = 3 perf_trace_buf = ( 0x0 -> NULL, 0x0 -> NULL, 0x0 -> NULL, 0x0 -> NULL) Link: http://lkml.kernel.org/r/1571120245-4186-1-git-send-email-prsood@codeaurora.org Cc: stable@vger.kernel.org Fixes: e12f03d7031a9 ("perf/core: Implement the 'perf_kprobe' PMU") Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Prateek Sood <prsood@codeaurora.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-10-22x86/cpu/vmware: Fix platform detection VMWARE_PORT macroThomas Hellstrom
The platform detection VMWARE_PORT macro uses the VMWARE_HYPERVISOR_PORT definition, but expects it to be an integer. However, when it was moved to the new vmware.h include file, it was changed to be a string to better fit into the VMWARE_HYPERCALL set of macros. This obviously breaks the platform detection VMWARE_PORT functionality. Change the VMWARE_HYPERVISOR_PORT and VMWARE_HYPERVISOR_PORT_HB definitions to be integers, and use __stringify() for their stringified form when needed. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: b4dd4f6e3648 ("Add a header file for hypercall definitions") Link: https://lkml.kernel.org/r/20191021172403.3085-3-thomas_os@shipmail.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-22x86/cpu/vmware: Use the full form of INL in VMWARE_HYPERCALL, for clang/llvmThomas Hellstrom
LLVM's assembler doesn't accept the short form INL instruction: inl (%%dx) but instead insists on the output register to be explicitly specified. This was previously fixed for the VMWARE_PORT macro. Fix it also for the VMWARE_HYPERCALL macro. Suggested-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: clang-built-linux@googlegroups.com Fixes: b4dd4f6e3648 ("Add a header file for hypercall definitions") Link: https://lkml.kernel.org/r/20191021172403.3085-2-thomas_os@shipmail.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-21xdp: Handle device unregister for devmap_hash map typeToke Høiland-Jørgensen
It seems I forgot to add handling of devmap_hash type maps to the device unregister hook for devmaps. This omission causes devices to not be properly released, which causes hangs. Fix this by adding the missing handler. Fixes: 6f9d451ab1a3 ("xdp: Add devmap_hash map type for looking up devices by hashed index") Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191019111931.2981954-1-toke@redhat.com
2019-10-21Merge tag 'arm-soc/for-5.4/devicetree-fixes-part2' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoC Device Tree fixes for 5.4, please pull the following: - Stefan removes the activity LED node from the CM3 DTS since there is no driver for that LED yet and leds-gpio cannot drive it either * tag 'arm-soc/for-5.4/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue Link: https://lore.kernel.org/r/20191021194302.21024-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'arm-soc/for-5.4/devicetree-fixes' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.4, please pull the following: - Stefan fixes the MMC controller bus-width property for the Raspberry Pi Zero Wireless which was incorrect after a prior refactoring * tag 'arm-soc/for-5.4/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci Link: https://lore.kernel.org/r/20191015172356.9650-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'davinci-fixes-for-v5.4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/fixes DaVinci fixes for v5.4 ====================== * fix GPIO backlight support on DA850 by enabling the needed config in davinci_all_defconfig. This is a fix because the driver and board support got converted to use BACKLIGHT_GPIO driver, but defconfig update is still missing in v5.4. * fix for McBSP DMA on DM365 * tag 'davinci-fixes-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci_all_defconfig: enable GPIO backlight ARM: davinci: dm365: Fix McBSP dma_slave_map entry Link: https://lore.kernel.org/r/7f3393f9-59be-a2d4-c1e1-ba6e407681d1@ti.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'v5.4-rockchip-dtsfixes1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes A number of fixes for individual boards like the rockpro64, and Hugsun X99 as well as a fix for the Gru-Kevin display override and fixing the dt- binding for Theobroma boards to the correct naming that is also actually used in the wild. * tag 'v5.4-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix override mode for rk3399-kevin panel arm64: dts: rockchip: Fix usb-c on Hugsun X99 TV Box arm64: dts: rockchip: fix RockPro64 sdmmc settings arm64: dts: rockchip: fix RockPro64 sdhci settings arm64: dts: rockchip: fix RockPro64 vdd-log regulator settings dt-bindings: arm: rockchip: fix Theobroma-System board bindings arm64: dts: rockchip: fix Rockpro64 RK808 interrupt line Link: https://lore.kernel.org/r/1599050.HRXuSXmxRg@phil Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'imx-fixes-5.4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.4: - Re-enable SNVS power key for imx6q-logicpd board which was accidentally disabled by a SoC level change. - Fix I2C switches on vf610-zii-scu4-aib board by specifying property i2c-mux-idle-disconnect. - A fix on imx-scu API that reads UID from firmware to avoid kernel NULL pointer dump. - A series from Anson to correct i.MX7 GPT and i.MX8 USDHC IPG clock. - A fix on DRM_MSM Kconfig regression on i.MX5 by adding the option explicitly into imx_v6_v7_defconfig. - Fix ARM regulator states issue for zii-ultra board, which is impacting stability of the board. - A correction on CPU core idle state name for LayerScape LX2160A SoC. * tag 'imx-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk ARM: dts: imx7s: Correct GPT's ipg clock source ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect' ARM: dts: imx6q-logicpd: Re-Enable SNVS power key arm64: dts: lx2160a: Correct CPU core idle state name arm64: dts: zii-ultra: fix ARM regulator states soc: imx: imx-scu: Getting UID from SCU should have response Link: https://lore.kernel.org/r/20191017141851.GA22506@dragon Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'omap-for-v5.4/fixes-rc3-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.4-rc cycle More fixes for omap variants: - Update more panel options in omap2plus_defconfig that got changed as we moved to use generic LCD panels - Remove unused twl_keypad for logicpd-torpedo-som to avoid boot time warnings. This is only a cosmetic fix, but at least dmesg output is now getting more readable after all the fixes to remove pointless warnings - Fix gpu_cm node name as we still have a non-standard node name dependency for clocks. This should eventually get fixed by use of domain specific compatible property - Fix use of i2c-mux-idle-disconnect for m3874-iceboard - Use level interrupt for omap4 & 5 wlcore to avoid lost edge interrupts * tag 'omap-for-v5.4/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Use level interrupt for omap4 & 5 wlcore ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage ARM: dts: omap5: fix gpu_cm clock provider name ARM: dts: logicpd-torpedo-som: Remove twl_keypad ARM: omap2plus_defconfig: Fix selected panels after generic panel changes Link: https://lore.kernel.org/r/pull-1571242890-118432@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21r8152: add device id for Lenovo ThinkPad USB-C Dock Gen 2Kazutoshi Noguchi
This device is sold as 'ThinkPad USB-C Dock Gen 2 (40AS)'. Chipset is RTL8153 and works with r8152. Without this, the generic cdc_ether grabs the device, and the device jam connected networks up when the machine suspends. Signed-off-by: Kazutoshi Noguchi <noguchi.kazutosi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21Merge tag 'arm-soc/for-5.4/devicetree-arm64-fixes' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM64-based SoCs Device Tree fixes for 5.4, please pull the following: - Rayangonda fixes the GPIO pins assignment for the Stringray SoCs * tag 'arm-soc/for-5.4/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux: arm64: dts: Fix gpio to pinmux mapping Link: https://lore.kernel.org/r/20191015172356.9650-2-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21net/sched: act_police: re-use tcf_tm_dump()Davide Caratti
Use tcf_tm_dump(), instead of an open coded variant (no functional change in this patch). Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21ipv4: fix IPSKB_FRAG_PMTU handling with fragmentationEric Dumazet
This patch removes the iph field from the state structure, which is not properly initialized. Instead, add a new field to make the "do we want to set DF" be the state bit and move the code to set the DF flag from ip_frag_next(). Joint work with Pablo and Linus. Fixes: 19c3401a917b ("net: ipv4: place control buffer handling away from fragmentation iterators") Reported-by: Patrick Schönthaler <patrick@notvads.ovh> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21Merge branch 'phy-marvell-support-downshift-as-PHY-tunable'David S. Miller
Heiner Kallweit says: ==================== net: phy: marvell: support downshift as PHY tunable So far downshift is implemented for one small use case only and can't be controlled from userspace. So let's implement this feature properly as a PHY tunable so that it can be controlled via ethtool. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21net: phy: marvell: remove superseded function marvell_set_downshiftHeiner Kallweit
Instead of superseded function marvell_set_downshift() we can use new function m88e1111_set_downshift() in m88e1116r_config_init(). For this m88e1116r_config_init() has to be moved in the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-23 12:57:55 +0000