summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-29powerpc/powernv: Fix CPU idle to be called with IRQs disabledNicholas Piggin
Commit e78a7614f3876 ("idle: Prevent late-arriving interrupts from disrupting offline") changes arch_cpu_idle_dead to be called with interrupts disabled, which triggers the WARN in pnv_smp_cpu_kill_self. Fix this by fixing up irq_happened after hard disabling, rather than requiring there are no pending interrupts, similarly to what was done done until commit 2525db04d1cc5 ("powerpc/powernv: Simplify lazy IRQ handling in CPU offline"). Fixes: e78a7614f3876 ("idle: Prevent late-arriving interrupts from disrupting offline") Reported-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Add unexpected_mask rather than checking for known bad values, change the WARN_ON() to a WARN_ON_ONCE()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191022115814.22456-1-npiggin@gmail.com
2019-10-29sched/topology: Allow sched_asym_cpucapacity to be disabledValentin Schneider
While the static key is correctly initialized as being disabled, it will remain forever enabled once turned on. This means that if we start with an asymmetric system and hotplug out enough CPUs to end up with an SMP system, the static key will remain set - which is obviously wrong. We should detect this and turn off things like misfit migration and capacity aware wakeups. As Quentin pointed out, having separate root domains makes this slightly trickier. We could have exclusive cpusets that create an SMP island - IOW, the domains within this root domain will not see any asymmetry. This means we can't just disable the key on domain destruction, we need to count how many asymmetric root domains we have. Consider the following example using Juno r0 which is 2+4 big.LITTLE, where two identical cpusets are created: they both span both big and LITTLE CPUs: asym0 asym1 [ ][ ] L L B L L B $ cgcreate -g cpuset:asym0 $ cgset -r cpuset.cpus=0,1,3 asym0 $ cgset -r cpuset.mems=0 asym0 $ cgset -r cpuset.cpu_exclusive=1 asym0 $ cgcreate -g cpuset:asym1 $ cgset -r cpuset.cpus=2,4,5 asym1 $ cgset -r cpuset.mems=0 asym1 $ cgset -r cpuset.cpu_exclusive=1 asym1 $ cgset -r cpuset.sched_load_balance=0 . (the CPU numbering may look odd because on the Juno LITTLEs are CPUs 0,3-5 and bigs are CPUs 1-2) If we make one of those SMP (IOW remove asymmetry) by e.g. hotplugging its big core, we would end up with an SMP cpuset and an asymmetric cpuset - the static key must remain set, because we still have one asymmetric root domain. With the above example, this could be done with: $ echo 0 > /sys/devices/system/cpu/cpu2/online Which would result in: asym0 asym1 [ ][ ] L L B L L When both SMP and asymmetric cpusets are present, all CPUs will observe sched_asym_cpucapacity being set (it is system-wide), but not all CPUs observe asymmetry in their sched domain hierarchy: per_cpu(sd_asym_cpucapacity, <any CPU in asym0>) == <some SD at DIE level> per_cpu(sd_asym_cpucapacity, <any CPU in asym1>) == NULL Change the simple key enablement to an increment, and decrement the key counter when destroying domains that cover asymmetric CPUs. Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Dietmar.Eggemann@arm.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: hannes@cmpxchg.org Cc: lizefan@huawei.com Cc: morten.rasmussen@arm.com Cc: qperret@google.com Cc: tj@kernel.org Cc: vincent.guittot@linaro.org Fixes: df054e8445a4 ("sched/topology: Add static_key for asymmetric CPU capacity optimizations") Link: https://lkml.kernel.org/r/20191023153745.19515-3-valentin.schneider@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-29sched/topology: Don't try to build empty sched domainsValentin Schneider
Turns out hotplugging CPUs that are in exclusive cpusets can lead to the cpuset code feeding empty cpumasks to the sched domain rebuild machinery. This leads to the following splat: Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 235 Comm: kworker/5:2 Not tainted 5.4.0-rc1-00005-g8d495477d62e #23 Hardware name: ARM Juno development board (r0) (DT) Workqueue: events cpuset_hotplug_workfn pstate: 60000005 (nZCv daif -PAN -UAO) pc : build_sched_domains (./include/linux/arch_topology.h:23 kernel/sched/topology.c:1898 kernel/sched/topology.c:1969) lr : build_sched_domains (kernel/sched/topology.c:1966) Call trace: build_sched_domains (./include/linux/arch_topology.h:23 kernel/sched/topology.c:1898 kernel/sched/topology.c:1969) partition_sched_domains_locked (kernel/sched/topology.c:2250) rebuild_sched_domains_locked (./include/linux/bitmap.h:370 ./include/linux/cpumask.h:538 kernel/cgroup/cpuset.c:955 kernel/cgroup/cpuset.c:978 kernel/cgroup/cpuset.c:1019) rebuild_sched_domains (kernel/cgroup/cpuset.c:1032) cpuset_hotplug_workfn (kernel/cgroup/cpuset.c:3205 (discriminator 2)) process_one_work (./arch/arm64/include/asm/jump_label.h:21 ./include/linux/jump_label.h:200 ./include/trace/events/workqueue.h:114 kernel/workqueue.c:2274) worker_thread (./include/linux/compiler.h:199 ./include/linux/list.h:268 kernel/workqueue.c:2416) kthread (kernel/kthread.c:255) ret_from_fork (arch/arm64/kernel/entry.S:1167) Code: f860dae2 912802d6 aa1603e1 12800000 (f8616853) The faulty line in question is: cap = arch_scale_cpu_capacity(cpumask_first(cpu_map)); and we're not checking the return value against nr_cpu_ids (we shouldn't have to!), which leads to the above. Prevent generate_sched_domains() from returning empty cpumasks, and add some assertion in build_sched_domains() to scream bloody murder if it happens again. The above splat was obtained on my Juno r0 with the following reproducer: $ cgcreate -g cpuset:asym $ cgset -r cpuset.cpus=0-3 asym $ cgset -r cpuset.mems=0 asym $ cgset -r cpuset.cpu_exclusive=1 asym $ cgcreate -g cpuset:smp $ cgset -r cpuset.cpus=4-5 smp $ cgset -r cpuset.mems=0 smp $ cgset -r cpuset.cpu_exclusive=1 smp $ cgset -r cpuset.sched_load_balance=0 . $ echo 0 > /sys/devices/system/cpu/cpu4/online $ echo 0 > /sys/devices/system/cpu/cpu5/online Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dietmar.Eggemann@arm.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: hannes@cmpxchg.org Cc: lizefan@huawei.com Cc: morten.rasmussen@arm.com Cc: qperret@google.com Cc: tj@kernel.org Cc: vincent.guittot@linaro.org Fixes: 05484e098448 ("sched/topology: Add SD_ASYM_CPUCAPACITY flag detection") Link: https://lkml.kernel.org/r/20191023153745.19515-2-valentin.schneider@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-29USB: gadget: Reject endpoints with 0 maxpacket valueAlan Stern
Endpoints with a maxpacket length of 0 are probably useless. They can't transfer any data, and it's not at all unlikely that a UDC will crash or hang when trying to handle a non-zero-length usb_request for such an endpoint. Indeed, dummy-hcd gets a divide error when trying to calculate the remainder of a transfer length by the maxpacket value, as discovered by the syzbot fuzzer. Currently the gadget core does not check for endpoints having a maxpacket value of 0. This patch adds a check to usb_ep_enable(), preventing such endpoints from being used. As far as I know, none of the gadget drivers in the kernel tries to create an endpoint with maxpacket = 0, but until now there has been nothing to prevent userspace programs under gadgetfs or configfs from doing it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+8ab8bf161038a8768553@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Acked-by: Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910281052370.1485-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-29clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18Colin Ian King
The zero'ing of bits 16 and 18 is incorrect. Currently the code is masking with the bitwise-and of BIT(16) & BIT(18) which is 0, so the updated value for val is always zero. Fix this by bitwise and-ing value with the correct mask that will zero bits 16 and 18. Addresses-Coverity: (" Suspicious &= or |= constant expression") Fixes: b8eb71dcdd08 ("clk: sunxi-ng: Add A80 CCU") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-29clk: sunxi: Fix operator precedence in sunxi_divs_clk_setupNathan Chancellor
r375326 in Clang exposes an issue with operator precedence in sunxi_div_clk_setup: drivers/clk/sunxi/clk-sunxi.c:1083:30: warning: operator '?:' has lower precedence than '|'; '|' will be evaluated first [-Wbitwise-conditional-parentheses] data->div[i].critical ? ~~~~~~~~~~~~~~~~~~~~~ ^ drivers/clk/sunxi/clk-sunxi.c:1083:30: note: place parentheses around the '|' expression to silence this warning data->div[i].critical ? ^ ) drivers/clk/sunxi/clk-sunxi.c:1083:30: note: place parentheses around the '?:' expression to evaluate it first data->div[i].critical ? ^ ( 1 warning generated. It appears that the intention was for ?: to be evaluated first so that CLK_IS_CRITICAL could be added to clkflags if the critical boolean was set; right now, | is being evaluated first. Add parentheses around the ?: block to have it be evaluated first. Fixes: 9919d44ff297 ("clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks") Link: https://github.com/ClangBuiltLinux/linux/issues/745 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-10-29powerpc/prom_init: Undo relocation before entering secure modeThiago Jung Bauermann
The ultravisor will do an integrity check of the kernel image but we relocated it so the check will fail. Restore the original image by relocating it back to the kernel virtual base address. This works because during build vmlinux is linked with an expected virtual runtime address of KERNELBASE. Fixes: 6a9c930bd775 ("powerpc/prom_init: Add the ESM call to prom_init") Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Tested-by: Michael Anderson <andmike@linux.ibm.com> [mpe: Add IS_ENABLED() to fix the CONFIG_RELOCATABLE=n build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190911163433.12822-1-bauerman@linux.ibm.com
2019-10-28libbpf: Fix off-by-one error in ELF sanity checkAndrii Nakryiko
libbpf's bpf_object__elf_collect() does simple sanity check after iterating over all ELF sections, if checks that .strtab index is correct. Unfortunately, due to section indices being 1-based, the check breaks for cases when .strtab ends up being the very last section in ELF. Fixes: 77ba9a5b48a7 ("tools lib bpf: Fetch map names from correct strtab") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191028233727.1286699-1-andriin@fb.com
2019-10-28libbpf: Fix compatibility for kernels without need_wakeupMagnus Karlsson
When the need_wakeup flag was added to AF_XDP, the format of the XDP_MMAP_OFFSETS getsockopt was extended. Code was added to the kernel to take care of compatibility issues arrising from running applications using any of the two formats. However, libbpf was not extended to take care of the case when the application/libbpf uses the new format but the kernel only supports the old format. This patch adds support in libbpf for parsing the old format, before the need_wakeup flag was added, and emulating a set of static need_wakeup flags that will always work for the application. v2 -> v3: * Incorporated code improvements suggested by Jonathan Lemon v1 -> v2: * Rebased to bpf-next * Rewrote the code as the previous version made you blind Fixes: a4500432c2587cb2a ("libbpf: add support for need_wakeup flag in AF_XDP part") Reported-by: Eloy Degen <degeneloy@gmail.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/bpf/1571995035-21889-1-git-send-email-magnus.karlsson@intel.com
2019-10-28scsi: qla2xxx: stop timer in shutdown pathNicholas Piggin
In shutdown/reboot paths, the timer is not stopped: qla2x00_shutdown pci_device_shutdown device_shutdown kernel_restart_prepare kernel_restart sys_reboot This causes lockups (on powerpc) when firmware config space access calls are interrupted by smp_send_stop later in reboot. Fixes: e30d1756480dc ("[SCSI] qla2xxx: Addition of shutdown callback handler.") Link: https://lore.kernel.org/r/20191024063804.14538-1-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-28hwmon: (ina3221) Fix read timeout issueNicolin Chen
After introducing "samples" to the calculation of wait time, the driver might timeout at the regmap_field_read_poll_timeout call, because the wait time could be longer than the 100000 usec limit due to a large "samples" number. So this patch sets the timeout limit to 2 times of the wait time in order to fix this issue. Fixes: 5c090abf945b ("hwmon: (ina3221) Add averaging mode support") Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/20191022005922.30239-1-nicoleotsuka@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-10-28atm: remove unneeded semicolonYueHaibing
remove unneeded semicolon. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28clk: ast2600: Fix enabling of clocksJoel Stanley
The struct clk_ops enable callback for the aspeed gates mixes up the set to clear and write to set registers. Fixes: d3d04f6c330a ("clk: Add support for AST2600 SoC") Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lkml.kernel.org/r/20191016131319.31318-1-joel@jms.id.au Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-10-28Merge tag 'batadv-net-for-davem-20191025' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Simon Wunderlich says: ==================== Here are two batman-adv bugfixes: * Fix free/alloc race for OGM and OGMv2, by Sven Eckelmann (2 patches) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28sock: remove unneeded semicolonYueHaibing
remove unneeded semicolon. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: mediatek: remove unneeded semicolonYueHaibing
remove unneeded semicolon. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28mlxsw: spectrum_buffers: remove unneeded semicolonYueHaibing
Remove excess semicolon after closing parenthesis. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: usb: lan78xx: Disable interrupts before calling generic_handle_irq()Daniel Wagner
lan78xx_status() will run with interrupts enabled due to the change in ed194d136769 ("usb: core: remove local_irq_save() around ->complete() handler"). generic_handle_irq() expects to be run with IRQs disabled. [ 4.886203] 000: irq 79 handler irq_default_primary_handler+0x0/0x8 enabled interrupts [ 4.886243] 000: WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:152 __handle_irq_event_percpu+0x154/0x168 [ 4.896294] 000: Modules linked in: [ 4.896301] 000: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.6 #39 [ 4.896310] 000: Hardware name: Raspberry Pi 3 Model B+ (DT) [ 4.896315] 000: pstate: 60000005 (nZCv daif -PAN -UAO) [ 4.896321] 000: pc : __handle_irq_event_percpu+0x154/0x168 [ 4.896331] 000: lr : __handle_irq_event_percpu+0x154/0x168 [ 4.896339] 000: sp : ffff000010003cc0 [ 4.896346] 000: x29: ffff000010003cc0 x28: 0000000000000060 [ 4.896355] 000: x27: ffff000011021980 x26: ffff00001189c72b [ 4.896364] 000: x25: ffff000011702bc0 x24: ffff800036d6e400 [ 4.896373] 000: x23: 000000000000004f x22: ffff000010003d64 [ 4.896381] 000: x21: 0000000000000000 x20: 0000000000000002 [ 4.896390] 000: x19: ffff8000371c8480 x18: 0000000000000060 [ 4.896398] 000: x17: 0000000000000000 x16: 00000000000000eb [ 4.896406] 000: x15: ffff000011712d18 x14: 7265746e69206465 [ 4.896414] 000: x13: ffff000010003ba0 x12: ffff000011712df0 [ 4.896422] 000: x11: 0000000000000001 x10: ffff000011712e08 [ 4.896430] 000: x9 : 0000000000000001 x8 : 000000000003c920 [ 4.896437] 000: x7 : ffff0000118cc410 x6 : ffff0000118c7f00 [ 4.896445] 000: x5 : 000000000003c920 x4 : 0000000000004510 [ 4.896453] 000: x3 : ffff000011712dc8 x2 : 0000000000000000 [ 4.896461] 000: x1 : 73a3f67df94c1500 x0 : 0000000000000000 [ 4.896466] 000: Call trace: [ 4.896471] 000: __handle_irq_event_percpu+0x154/0x168 [ 4.896481] 000: handle_irq_event_percpu+0x50/0xb0 [ 4.896489] 000: handle_irq_event+0x40/0x98 [ 4.896497] 000: handle_simple_irq+0xa4/0xf0 [ 4.896505] 000: generic_handle_irq+0x24/0x38 [ 4.896513] 000: intr_complete+0xb0/0xe0 [ 4.896525] 000: __usb_hcd_giveback_urb+0x58/0xd8 [ 4.896533] 000: usb_giveback_urb_bh+0xd0/0x170 [ 4.896539] 000: tasklet_action_common.isra.0+0x9c/0x128 [ 4.896549] 000: tasklet_hi_action+0x24/0x30 [ 4.896556] 000: __do_softirq+0x120/0x23c [ 4.896564] 000: irq_exit+0xb8/0xd8 [ 4.896571] 000: __handle_domain_irq+0x64/0xb8 [ 4.896579] 000: bcm2836_arm_irqchip_handle_irq+0x60/0xc0 [ 4.896586] 000: el1_irq+0xb8/0x140 [ 4.896592] 000: arch_cpu_idle+0x10/0x18 [ 4.896601] 000: do_idle+0x200/0x280 [ 4.896608] 000: cpu_startup_entry+0x20/0x28 [ 4.896615] 000: rest_init+0xb4/0xc0 [ 4.896623] 000: arch_call_rest_init+0xc/0x14 [ 4.896632] 000: start_kernel+0x454/0x480 Fixes: ed194d136769 ("usb: core: remove local_irq_save() around ->complete() handler") Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Stefan Wahren <wahrenst@gmx.net> Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Miller <davem@davemloft.net> Signed-off-by: Daniel Wagner <dwagner@suse.de> Tested-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: dsa: sja1105: improve NET_DSA_SJA1105_TAS dependencyArnd Bergmann
An earlier bugfix introduced a dependency on CONFIG_NET_SCH_TAPRIO, but this missed the case of NET_SCH_TAPRIO=m and NET_DSA_SJA1105=y, which still causes a link error: drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_setup_tc_taprio': sja1105_tas.c:(.text+0x5c): undefined reference to `taprio_offload_free' sja1105_tas.c:(.text+0x3b4): undefined reference to `taprio_offload_get' drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_tas_teardown': sja1105_tas.c:(.text+0x6ec): undefined reference to `taprio_offload_free' Change the dependency to only allow selecting the TAS code when it can link against the taprio code. Fixes: a8d570de0cc6 ("net: dsa: sja1105: Add dependency for NET_DSA_SJA1105_TAS") Fixes: 317ab5b86c8e ("net: dsa: sja1105: Configure the Time-Aware Scheduler via tc-taprio offload") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: ethernet: ftgmac100: Fix DMA coherency issue with SW checksumBenjamin Herrenschmidt
We are calling the checksum helper after the dma_map_single() call to map the packet. This is incorrect as the checksumming code will touch the packet from the CPU. This means the cache won't be properly flushes (or the bounce buffering will leave us with the unmodified packet to DMA). This moves the calculation of the checksum & vlan tags to before the DMA mapping. This also has the side effect of fixing another bug: If the checksum helper fails, we goto "drop" to drop the packet, which will not unmap the DMA mapping. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Fixes: 05690d633f30 ("ftgmac100: Upgrade to NETIF_F_HW_CSUM") Reviewed-by: Vijay Khemka <vijaykhemka@fb.com> Tested-by: Vijay Khemka <vijaykhemka@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28Merge branch 'mv88e6xxx-Allow-config-of-ATU-hash-algorithm'David S. Miller
Andrew Lunn says: ==================== mv88e6xxx: Allow config of ATU hash algorithm v2: Pass a pointer for where the hash should be stored, return a plain errno, or 0. Document the parameter. v3: Document type of parameter, and valid range Add break statements to default clause of switch Directly use ctx->val.vu8 v4: Consistently use devlink, not a mix of devlink and dl. Fix allocation of devlink priv Remove upper case from parameter name Make mask 16 bit wide. v5: Back to using the parameter name ATU_hash v6: Rebase net-next/master ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: dsa: mv88e6xxx: Add devlink param for ATU hash algorithm.Andrew Lunn
Some of the marvell switches have bits controlling the hash algorithm the ATU uses for MAC addresses. In some industrial settings, where all the devices are from the same manufacture, and hence use the same OUI, the default hashing algorithm is not optimal. Allow the other algorithms to be selected via devlink. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: dsa: Add support for devlink device parametersAndrew Lunn
Add plumbing to allow DSA drivers to register parameters with devlink. To keep with the abstraction, the DSA drivers pass the ds structure to these helpers, and the DSA core then translates that to the devlink structure associated to the device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28r8169: use helper rtl_hw_aspm_clkreq_enable also in rtl_hw_start_8168g_2Heiner Kallweit
One place in the driver was left where the open-coded functionality hasn't been replaced with helper rtl_hw_aspm_clkreq_enable yet. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: fix sk_page_frag() recursion from memory reclaimTejun Heo
sk_page_frag() optimizes skb_frag allocations by using per-task skb_frag cache when it knows it's the only user. The condition is determined by seeing whether the socket allocation mask allows blocking - if the allocation may block, it obviously owns the task's context and ergo exclusively owns current->task_frag. Unfortunately, this misses recursion through memory reclaim path. Please take a look at the following backtrace. [2] RIP: 0010:tcp_sendmsg_locked+0xccf/0xe10 ... tcp_sendmsg+0x27/0x40 sock_sendmsg+0x30/0x40 sock_xmit.isra.24+0xa1/0x170 [nbd] nbd_send_cmd+0x1d2/0x690 [nbd] nbd_queue_rq+0x1b5/0x3b0 [nbd] __blk_mq_try_issue_directly+0x108/0x1b0 blk_mq_request_issue_directly+0xbd/0xe0 blk_mq_try_issue_list_directly+0x41/0xb0 blk_mq_sched_insert_requests+0xa2/0xe0 blk_mq_flush_plug_list+0x205/0x2a0 blk_flush_plug_list+0xc3/0xf0 [1] blk_finish_plug+0x21/0x2e _xfs_buf_ioapply+0x313/0x460 __xfs_buf_submit+0x67/0x220 xfs_buf_read_map+0x113/0x1a0 xfs_trans_read_buf_map+0xbf/0x330 xfs_btree_read_buf_block.constprop.42+0x95/0xd0 xfs_btree_lookup_get_block+0x95/0x170 xfs_btree_lookup+0xcc/0x470 xfs_bmap_del_extent_real+0x254/0x9a0 __xfs_bunmapi+0x45c/0xab0 xfs_bunmapi+0x15/0x30 xfs_itruncate_extents_flags+0xca/0x250 xfs_free_eofblocks+0x181/0x1e0 xfs_fs_destroy_inode+0xa8/0x1b0 destroy_inode+0x38/0x70 dispose_list+0x35/0x50 prune_icache_sb+0x52/0x70 super_cache_scan+0x120/0x1a0 do_shrink_slab+0x120/0x290 shrink_slab+0x216/0x2b0 shrink_node+0x1b6/0x4a0 do_try_to_free_pages+0xc6/0x370 try_to_free_mem_cgroup_pages+0xe3/0x1e0 try_charge+0x29e/0x790 mem_cgroup_charge_skmem+0x6a/0x100 __sk_mem_raise_allocated+0x18e/0x390 __sk_mem_schedule+0x2a/0x40 [0] tcp_sendmsg_locked+0x8eb/0xe10 tcp_sendmsg+0x27/0x40 sock_sendmsg+0x30/0x40 ___sys_sendmsg+0x26d/0x2b0 __sys_sendmsg+0x57/0xa0 do_syscall_64+0x42/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 In [0], tcp_send_msg_locked() was using current->page_frag when it called sk_wmem_schedule(). It already calculated how many bytes can be fit into current->page_frag. Due to memory pressure, sk_wmem_schedule() called into memory reclaim path which called into xfs and then IO issue path. Because the filesystem in question is backed by nbd, the control goes back into the tcp layer - back into tcp_sendmsg_locked(). nbd sets sk_allocation to (GFP_NOIO | __GFP_MEMALLOC) which makes sense - it's in the process of freeing memory and wants to be able to, e.g., drop clean pages to make forward progress. However, this confused sk_page_frag() called from [2]. Because it only tests whether the allocation allows blocking which it does, it now thinks current->page_frag can be used again although it already was being used in [0]. After [2] used current->page_frag, the offset would be increased by the used amount. When the control returns to [0], current->page_frag's offset is increased and the previously calculated number of bytes now may overrun the end of allocated memory leading to silent memory corruptions. Fix it by adding gfpflags_normal_context() which tests sleepable && !reclaim and use it to determine whether to use current->task_frag. v2: Eric didn't like gfp flags being tested twice. Introduce a new helper gfpflags_normal_context() and combine the two tests. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28Merge branch 'net-dsa-b53-Add-support-for-MDB'David S. Miller
Florian Fainelli says: ==================== net: dsa: b53: Add support for MDB This patch series adds support for programming multicast database entries on b53 and bcm_sf2. This is extracted from a previously submitted series that added managed mode support, but these patches are usable in isolation. The larger series still needs to be reworked. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: dsa: bcm_sf2: Wire up MDB operationsFlorian Fainelli
Leverage the recently add b53_mdb_{add,del,prepare} functions since they work as-is for bcm_sf2. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: dsa: b53: Add support for MDBFlorian Fainelli
In preparation for supporting IGMP snooping with or without the use of a bridge, add support within b53_common.c to program the ARL entries for multicast operations. The key difference is that a multicast ARL entry is comprised of a bitmask of enabled ports, instead of a port number. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28udp: fix data-race in udp_set_dev_scratch()Eric Dumazet
KCSAN reported a data-race in udp_set_dev_scratch() [1] The issue here is that we must not write over skb fields if skb is shared. A similar issue has been fixed in commit 89c22d8c3b27 ("net: Fix skb csum races when peeking") While we are at it, use a helper only dealing with udp_skb_scratch(skb)->csum_unnecessary, as this allows udp_set_dev_scratch() to be called once and thus inlined. [1] BUG: KCSAN: data-race in udp_set_dev_scratch / udpv6_recvmsg write to 0xffff888120278317 of 1 bytes by task 10411 on cpu 1: udp_set_dev_scratch+0xea/0x200 net/ipv4/udp.c:1308 __first_packet_length+0x147/0x420 net/ipv4/udp.c:1556 first_packet_length+0x68/0x2a0 net/ipv4/udp.c:1579 udp_poll+0xea/0x110 net/ipv4/udp.c:2720 sock_poll+0xed/0x250 net/socket.c:1256 vfs_poll include/linux/poll.h:90 [inline] do_select+0x7d0/0x1020 fs/select.c:534 core_sys_select+0x381/0x550 fs/select.c:677 do_pselect.constprop.0+0x11d/0x160 fs/select.c:759 __do_sys_pselect6 fs/select.c:784 [inline] __se_sys_pselect6 fs/select.c:769 [inline] __x64_sys_pselect6+0x12e/0x170 fs/select.c:769 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 read to 0xffff888120278317 of 1 bytes by task 10413 on cpu 0: udp_skb_csum_unnecessary include/net/udp.h:358 [inline] udpv6_recvmsg+0x43e/0xe90 net/ipv6/udp.c:310 inet6_recvmsg+0xbb/0x240 net/ipv6/af_inet6.c:592 sock_recvmsg_nosec+0x5c/0x70 net/socket.c:871 ___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480 do_recvmmsg+0x19a/0x5c0 net/socket.c:2601 __sys_recvmmsg+0x1ef/0x200 net/socket.c:2680 __do_sys_recvmmsg net/socket.c:2703 [inline] __se_sys_recvmmsg net/socket.c:2696 [inline] __x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 10413 Comm: syz-executor.0 Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 2276f58ac589 ("udp: use a separate rx queue for packet reception") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28Merge branch 'mvpp2-improvements-in-rx-path'David S. Miller
Matteo Croce says: ==================== mvpp2 improvements in rx path Refactor some code in the RX path to allow prefetching some data from the packet header. The first patch is only a refactor, the second one reduces the data synced, while the third one adds the prefetch. The packet rate improvement with the second patch is very small (1606 => 1620 kpps), while the prefetch bumps it up by 14%: 1620 => 1853 kpps. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28mvpp2: prefetch frame headerMatteo Croce
When receiving traffic, eth_type_trans() is high up on the perf top list, because it's the first function which access the packet data. Move the DMA unmap a bit higher, and put a prefetch just after it, so we have more time to load the data into the cache. The packet rate increase is about 14% with a tc drop test: 1620 => 1853 kpps Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28mvpp2: sync only the received frameMatteo Croce
In the RX path we always sync against the maximum frame size for that pool. Do the DMA sync and the unmap separately, so we can only sync by the size of the received frame. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28mvpp2: refactor frame drop routineMatteo Croce
Move some code down to remove a backward goto. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28isdn: hfcsusb: Spelling and grammar fixesGeert Uytterhoeven
Fix misspellings of "endpoints", "configuration", and "device's". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28tipc: Spelling s/enpoint/endpoint/Geert Uytterhoeven
Fix misspelling of "endpoint". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: Fix various misspellings of "connect"Geert Uytterhoeven
Fix misspellings of "disconnect", "disconnecting", "connections", and "disconnected". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: Fix misspellings of "configure" and "configuration"Geert Uytterhoeven
Fix various misspellings of "configuration" and "configure". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: dpaa2: Use the correct style for SPDX License IdentifierNishad Kamdar
This patch corrects the SPDX License Identifier style in header files related to DPAA2 Ethernet driver supporting Freescale SoCs with DPAA2. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: dsa: qca8k: Initialize the switch with correct number of portsMichal Vokáč
Since commit 0394a63acfe2 ("net: dsa: enable and disable all ports") the dsa core disables all unused ports of a switch. In this case disabling ports with numbers higher than QCA8K_NUM_PORTS causes that some switch registers are overwritten with incorrect content. To fix this, initialize the dsa_switch->num_ports with correct number of ports. Fixes: 7e99e3470172 ("net: dsa: remove dsa_switch_alloc helper") Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: dsa: fix dereference on ds->dev before null check errorColin Ian King
Currently ds->dev is dereferenced on the assignments of pdata and np before ds->dev is null checked, hence there is a potential null pointer dereference on ds->dev. Fix this by assigning pdata and np after the ds->dev null pointer sanity check. Addresses-Coverity: ("Dereference before null check") Fixes: 7e99e3470172 ("net: dsa: remove dsa_switch_alloc helper") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28Merge branch 'net-avoid-KCSAN-splats'David S. Miller
Eric Dumazet says: ==================== net: avoid KCSAN splats Often times we use skb_queue_empty() without holding a lock, meaning that other cpus (or interrupt) can change the queue under us. This is fine, but we need to properly annotate the lockless intent to make sure the compiler wont over optimize things. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: add READ_ONCE() annotation in __skb_wait_for_more_packets()Eric Dumazet
__skb_wait_for_more_packets() can be called while other cpus can feed packets to the socket receive queue. KCSAN reported : BUG: KCSAN: data-race in __skb_wait_for_more_packets / __udp_enqueue_schedule_skb write to 0xffff888102e40b58 of 8 bytes by interrupt on cpu 0: __skb_insert include/linux/skbuff.h:1852 [inline] __skb_queue_before include/linux/skbuff.h:1958 [inline] __skb_queue_tail include/linux/skbuff.h:1991 [inline] __udp_enqueue_schedule_skb+0x2d7/0x410 net/ipv4/udp.c:1470 __udp_queue_rcv_skb net/ipv4/udp.c:1940 [inline] udp_queue_rcv_one_skb+0x7bd/0xc70 net/ipv4/udp.c:2057 udp_queue_rcv_skb+0xb5/0x400 net/ipv4/udp.c:2074 udp_unicast_rcv_skb.isra.0+0x7e/0x1c0 net/ipv4/udp.c:2233 __udp4_lib_rcv+0xa44/0x17c0 net/ipv4/udp.c:2300 udp_rcv+0x2b/0x40 net/ipv4/udp.c:2470 ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124 process_backlog+0x1d3/0x420 net/core/dev.c:5955 read to 0xffff888102e40b58 of 8 bytes by task 13035 on cpu 1: __skb_wait_for_more_packets+0xfa/0x320 net/core/datagram.c:100 __skb_recv_udp+0x374/0x500 net/ipv4/udp.c:1683 udp_recvmsg+0xe1/0xb10 net/ipv4/udp.c:1712 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838 sock_recvmsg_nosec+0x5c/0x70 net/socket.c:871 ___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480 do_recvmmsg+0x19a/0x5c0 net/socket.c:2601 __sys_recvmmsg+0x1ef/0x200 net/socket.c:2680 __do_sys_recvmmsg net/socket.c:2703 [inline] __se_sys_recvmmsg net/socket.c:2696 [inline] __x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 13035 Comm: syz-executor.3 Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: use skb_queue_empty_lockless() in busy poll contextsEric Dumazet
Busy polling usually runs without locks. Let's use skb_queue_empty_lockless() instead of skb_queue_empty() Also uses READ_ONCE() in __skb_try_recv_datagram() to address a similar potential problem. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: use skb_queue_empty_lockless() in poll() handlersEric Dumazet
Many poll() handlers are lockless. Using skb_queue_empty_lockless() instead of skb_queue_empty() is more appropriate. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28udp: use skb_queue_empty_lockless()Eric Dumazet
syzbot reported a data-race [1]. We should use skb_queue_empty_lockless() to document that we are not ensuring a mutual exclusion and silence KCSAN. [1] BUG: KCSAN: data-race in __skb_recv_udp / __udp_enqueue_schedule_skb write to 0xffff888122474b50 of 8 bytes by interrupt on cpu 0: __skb_insert include/linux/skbuff.h:1852 [inline] __skb_queue_before include/linux/skbuff.h:1958 [inline] __skb_queue_tail include/linux/skbuff.h:1991 [inline] __udp_enqueue_schedule_skb+0x2c1/0x410 net/ipv4/udp.c:1470 __udp_queue_rcv_skb net/ipv4/udp.c:1940 [inline] udp_queue_rcv_one_skb+0x7bd/0xc70 net/ipv4/udp.c:2057 udp_queue_rcv_skb+0xb5/0x400 net/ipv4/udp.c:2074 udp_unicast_rcv_skb.isra.0+0x7e/0x1c0 net/ipv4/udp.c:2233 __udp4_lib_rcv+0xa44/0x17c0 net/ipv4/udp.c:2300 udp_rcv+0x2b/0x40 net/ipv4/udp.c:2470 ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5124 process_backlog+0x1d3/0x420 net/core/dev.c:5955 read to 0xffff888122474b50 of 8 bytes by task 8921 on cpu 1: skb_queue_empty include/linux/skbuff.h:1494 [inline] __skb_recv_udp+0x18d/0x500 net/ipv4/udp.c:1653 udp_recvmsg+0xe1/0xb10 net/ipv4/udp.c:1712 inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838 sock_recvmsg_nosec+0x5c/0x70 net/socket.c:871 ___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480 do_recvmmsg+0x19a/0x5c0 net/socket.c:2601 __sys_recvmmsg+0x1ef/0x200 net/socket.c:2680 __do_sys_recvmmsg net/socket.c:2703 [inline] __se_sys_recvmmsg net/socket.c:2696 [inline] __x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 8921 Comm: syz-executor.4 Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28net: add skb_queue_empty_lockless()Eric Dumazet
Some paths call skb_queue_empty() without holding the queue lock. We must use a barrier in order to not let the compiler do strange things, and avoid KCSAN splats. Adding a barrier in skb_queue_empty() might be overkill, I prefer adding a new helper to clearly identify points where the callers might be lockless. This might help us finding real bugs. The corresponding WRITE_ONCE() should add zero cost for current compilers. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28Merge tag 'arc-5.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "Small fixes for ARC: - perf fix for Big Endian build [Alexey] - hadk platform enable soem peripherals [Eugeniy]" * tag 'arc-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: perf: Accommodate big-endian CPU ARC: [plat-hsdk]: Enable on-boardi SPI ADC IC ARC: [plat-hsdk]: Enable on-board SPI NOR flash IC
2019-10-28RDMA/hns: Prevent memory leaks of eq->buf_listLijun Ou
eq->buf_list->buf and eq->buf_list should also be freed when eqe_hop_num is set to 0, or there will be memory leaks. Fixes: a5073d6054f7 ("RDMA/hns: Add eq support of hip08") Link: https://lore.kernel.org/r/1572072995-11277-3-git-send-email-liweihang@hisilicon.com Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28RISC-V: Add PCIe I/O BAR memory mappingYash Shah
For legacy I/O BARs (non-MMIO BARs) to work correctly on RISC-V Linux, we need to establish a reserved memory region for them, so that drivers that wish to use the legacy I/O BARs can issue reads and writes against a memory region that is mapped to the host PCIe controller's I/O BAR mapping. Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-10-28RDMA/iw_cxgb4: Avoid freeing skb twice in arp failure casePotnuri Bharat Teja
_put_ep_safe() and _put_pass_ep_safe() free the skb before it is freed by process_work(). fix double free by freeing the skb only in process_work(). Fixes: 1dad0ebeea1c ("iw_cxgb4: Avoid touch after free error in ARP failure handlers") Link: https://lore.kernel.org/r/1572006880-5800-1-git-send-email-bharat@chelsio.com Signed-off-by: Dakshaja Uppalapati <dakshaja@chelsio.com> Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
generated by cgit (git 2.34.1) at 2025-09-22 00:14:43 +0000