| Age | Commit message (Collapse) | Author |
|---|
|
switch to per-vif ps support since mt7615 offload firmware can handle it
properly. This patch allows enabling/disabling power-save support on p2p
interface
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
drivers/net/wireless/mediatek/mt76/mt7915/main.c:694:1: sparse:
sparse: context imbalance in 'mt7915_sta_rc_update' - wrong count at exit
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:303:43: sparse: sparse: cast to restricted __le32
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:304:43: sparse: sparse: cast to restricted __le32
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:305:43: sparse: sparse: cast to restricted __le32
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:319:35: sparse: sparse: cast to restricted __le32
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:327:35: sparse: sparse: cast to restricted __le32
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:345:41: sparse: sparse: cast to restricted __le32
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:355:33: sparse: sparse: cast to restricted __le32
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:451:21: sparse: sparse: invalid assignment: |=
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:451:21: sparse: left side has type unsigned int
drivers/net/wireless/mediatek/mt76/mt7915/mac.c:451:21: sparse: right side has type restricted __le32
Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
All drivers before MT7915 have a limit of 128 WCID entries. Stop relying
on ARRAY_SIZE(dev->mt76.wcid), since it no longer reflects that limit.
Fixes: 49e649c3e0a6 ("mt76: adjust wcid size to support new 802.11ax generation")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move assignment of .data1 and .data2 to a single place and fix overwriting
of values from the template
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix following NULL pointer dereference in mt7615_register_ext_phy routine
[ 27.648860] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060
[ 27.657697] Mem abort info:
[ 27.660495] ESR = 0x96000046
[ 27.663549] EC = 0x25: DABT (current EL), IL = 32 bits
[ 27.668857] SET = 0, FnV = 0
[ 27.671910] EA = 0, S1PTW = 0
[ 27.675040] Data abort info:
[ 27.677918] ISV = 0, ISS = 0x00000046
[ 27.681751] CM = 0, WnR = 1
[ 27.684717] user pgtable: 4k pages, 39-bit VAs, pgdp=000000007d8cc000
[ 27.691156] [0000000000000060] pgd=000000007d281003, pud=000000007d281003, pmd=0000000000000000
[ 27.699857] Internal error: Oops: 96000046 [#1] SMP
[ 27.774939] CPU: 1 PID: 701 Comm: ash Not tainted 5.4.41 #0
[ 27.780500] Hardware name: Bananapi BPI-R64 (DT)
[ 27.785108] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 27.789897] pc : mt7615_register_ext_phy+0x60/0x2c8 [mt7615_common]
[ 27.796156] lr : mt7615_init_debugfs+0x99c/0x18e0 [mt7615_common]
[ 27.802237] sp : ffffffc0115dbcb0
[ 27.805541] x29: ffffffc0115dbcb0 x28: ffffff803e309600
[ 27.810843] x27: 0000000000000000 x26: 0000000000000000
[ 27.816144] x25: ffffff803d936928 x24: ffffff803d936950
[ 27.821447] x23: 0000000000000000 x22: 0000000fffffffe0
[ 27.826749] x21: 0000000000000002 x20: ffffff8001e82620
[ 27.832050] x19: 0000000000000000 x18: 0000000000000000
[ 27.837352] x17: 0000000000000000 x16: 0000000000000000
[ 27.842653] x15: 0000000000000000 x14: 0000000000000000
[ 27.847955] x13: 0000000000000000 x12: 0000000000000000
[ 27.853256] x11: 0000000000000000 x10: 0000000000000040
[ 27.858558] x9 : ffffffc0112b3eb0 x8 : ffffffc0112b3ea8
[ 27.863859] x7 : ffffff803e400048 x6 : 0000000000000000
[ 27.869161] x5 : ffffff803e400000 x4 : 0000000000000000
[ 27.874462] x3 : 0000000000000001 x2 : 0000000000007615
[ 27.879764] x1 : 0000000000000068 x0 : ffffffc0088ccc58
[ 27.885066] Call trace:
[ 27.887505] mt7615_register_ext_phy+0x60/0x2c8 [mt7615_common]
[ 27.893416] mt7615_init_debugfs+0x99c/0x18e0 [mt7615_common]
[ 27.899156] simple_attr_write+0xf0/0x178
[ 27.903158] debugfs_attr_write+0x4c/0x70
[ 27.907159] full_proxy_write+0x60/0x90
[ 27.910987] __vfs_write+0x18/0x40
[ 27.914379] vfs_write+0xb0/0x1b8
[ 27.917685] ksys_write+0x4c/0xc8
[ 27.920989] __arm64_sys_write+0x18/0x20
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:2317:31: sparse: sparse:
incorrect type in initializer (different base types)
Fixes: 5517f78b0063 ("mt76: mt7915: enable firmware module debug support")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This fixes the following sparse warning:
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:253:16: sparse: sparse: mixing different enum types:
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:253:16: sparse: unsigned int enum mt7915_txq_id
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:253:16: sparse: unsigned int enum mt76_txq_id
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:758:63: sparse: sparse: incorrect type in argument 2 (different address spaces)
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:758:63: sparse: expected unsigned char const [usertype] *ies
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:758:63: sparse: got unsigned char const [noderef] <asn:4> *
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1390:23: sparse: sparse: incorrect type in argument 1 (different base types)
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1390:23: sparse: expected unsigned int w
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1390:23: sparse: got restricted __le32 [usertype] supp_ht_mcs
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1390:23: sparse: sparse: restricted __le32 degrades to integer
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1429:60: sparse: sparse: bad assignment (>>=) to restricted __le16
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:1773:16: sparse: sparse: restricted __le32 degrades to integer
Fixes: 6094f86fb371 ("mt76: mt7915: add HE bss_conf support for interfaces")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Enable or disable OBSS PD when the bss config changes or we
assoc to an AP that broadcasts the IE.
With this patch, we can get ~20% gain in OBSS OTA environment.
Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
mt76x02_mcu_msg_send is run just by mmio code so get rid of
mt76_is_mmio() check
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Introduce remain_on_channel support to mt7615 driver if the device is
running offload firmware
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
vmx_load_mmu_pgd is delaying the write of GUEST_CR3 to prepare_vmcs02 as
an optimization, but this is only correct before the nested vmentry.
If userspace is modifying CR3 with KVM_SET_SREGS after the VM has
already been put in guest mode, the value of CR3 will not be updated.
Remove the optimization, which almost never triggers anyway.
Fixes: 04f11ef45810 ("KVM: nVMX: Always write vmcs02.GUEST_CR3 during nested VM-Enter")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
svm_load_mmu_pgd is delaying the write of GUEST_CR3 to prepare_vmcs02 as
an optimization, but this is only correct before the nested vmentry.
If userspace is modifying CR3 with KVM_SET_SREGS after the VM has
already been put in guest mode, the value of CR3 will not be updated.
Remove the optimization, which almost never triggers anyway.
This was was added in commit 689f3bf21628 ("KVM: x86: unify callbacks
to load paging root", 2020-03-16) just to keep the two vendor-specific
modules closer, but we'll fix VMX too.
Fixes: 689f3bf21628 ("KVM: x86: unify callbacks to load paging root")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The usual drill at this point, except there is no code to remove because this
case was not handled at all.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
All events now inject vmexits before vmentry rather than after vmexit. Therefore,
exit_required is not set anymore and we can remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This allows exceptions injected by the emulator to be properly delivered
as vmexits. The code also becomes simpler, because we can just let all
L0-intercepted exceptions go through the usual path. In particular, our
emulation of the VMX #DB exit qualification is very much simplified,
because the vmexit injection path can use kvm_deliver_exception_payload
to update DR6.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In case an interrupt arrives after nested.check_events but before the
call to kvm_cpu_has_injectable_intr, we could end up enabling the interrupt
window even if the interrupt is actually going to be a vmexit. This is
useless rather than harmful, but it really complicates reasoning about
SVM's handling of the VINTR intercept. We'd like to never bother with
the VINTR intercept if V_INTR_MASKING=1 && INTERCEPT_INTR=1, because in
that case there is no interrupt window and we can just exit the nested
guest whenever we want.
This patch moves the opening of the interrupt window inside
inject_pending_event. This consolidates the check for pending
interrupt/NMI/SMI in one place, and makes KVM's usage of immediate
exits more consistent, extending it beyond just nested virtualization.
There are two functional changes here. They only affect corner cases,
but overall they simplify the inject_pending_event.
- re-injection of still-pending events will also use req_immediate_exit
instead of using interrupt-window intercepts. This should have no impact
on performance on Intel since it simply replaces an interrupt-window
or NMI-window exit for a preemption-timer exit. On AMD, which has no
equivalent of the preemption time, it may incur some overhead but an
actual effect on performance should only be visible in pathological cases.
- kvm_arch_interrupt_allowed and kvm_vcpu_has_events will return true
if an interrupt, NMI or SMI is blocked by nested_run_pending. This
makes sense because entering the VM will allow it to make progress
and deliver the event.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The commit 0ebeea8ca8a4d1d453a ("bpf: Restrict bpf_probe_read{, str}() only
to archs where they work") caused that bpf_probe_read{, str}() functions
were not longer available on architectures where the same logical address
might have different content in kernel and user memory mapping. These
architectures should use probe_read_{user,kernel}_str helpers.
For backward compatibility, the problematic functions are still available
on architectures where the user and kernel address spaces are not
overlapping. This is defined CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE.
At the moment, these backward compatible functions are enabled only on x86_64,
arm, and arm64. Let's do it also on powerpc that has the non overlapping
address space as well.
Fixes: 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/lkml/20200527122844.19524-1-pmladek@suse.com
|
|
Baikal-T1 SoC provides an embedded process, voltage and temperature
sensor to monitor an internal SoC environment (chip temperature, supply
voltage and process monitor) and on time detect critical situations,
which may cause the system instability and even damages. The IP-block
is based on the Analog Bits PVT sensor, but is equipped with a
dedicated control wrapper, which provides a MMIO registers-based access
to the sensor core functionality (APB3-bus based) and exposes an
additional functions like thresholds/data ready interrupts, its status
and masks, measurements timeout. All of these is used to create a hwmon
driver being added to the kernel by this commit.
The driver implements support for the hardware monitoring capabilities
of Baikal-T1 process, voltage and temperature sensors. PVT IP-core
consists of one temperature and four voltage sensors, each of which is
implemented as a dedicated hwmon channel config.
The driver can optionally provide the hwmon alarms for each sensor the
PVT controller supports. The alarms functionality is made compile-time
configurable due to the hardware interface implementation peculiarity,
which is connected with an ability to convert data from only one sensor
at a time. Additional limitation is that the controller performs the
thresholds checking synchronously with the data conversion procedure.
Due to these limitations in order to have the hwmon alarms
automatically detected the driver code must switch from one sensor to
another, read converted data and manually check the threshold status
bits. Depending on the measurements timeout settings this design may
cause additional burden on the system performance. By default if the
alarms kernel config is disabled the data conversion is performed by
the driver on demand when read operation is requested via corresponding
_input-file.
Co-developed-by: Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru>
Signed-off-by: Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
For hwmon drivers using the hwmon_device_register_with_info() API, it
is desirable to have a generic notification mechanism available. This
mechanism can be used to notify userspace as well as the thermal
subsystem if the driver experiences any events, such as warning or
critical alarms.
Implement hwmon_notify_event() to provide this mechanism. The function
generates a sysfs event and a udev event. If the device is registered
with the thermal subsystem and the event is associated with a temperature
sensor, also notify the thermal subsystem that a thermal event occurred.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Maxim Kaurkin <Maxim.Kaurkin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Baikal-T1 SoC is equipped with an embedded process, voltage and
temperature sensor to monitor the chip internal environment like
temperature, supply voltage and transistors performance.
This bindings describes the external Baikal-T1 PVT control interfaces
like MMIO registers space, interrupt request number and clocks source.
These are then used by the corresponding hwmon device driver to
implement the sysfs files-based access to the sensors functionality.
Co-developed-by: Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru>
Signed-off-by: Maxim Kaurkin <maxim.kaurkin@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Pull NVMe poll fix from Christoph.
* 'nvme-5.7' of git://git.infradead.org/nvme:
nvme-pci: avoid race between nvme_reap_pending_cqes() and nvme_poll()
|
|
disk_start_io_acct and disk_end_io_acct need at least a struct gendisk
forward declaration, but for weird historic reasons much of blkdev.h
is stubbed out for CONFIG_BLOCK=n. Fix this by stubbing more out for
now, but eventually this header will need a massive cleanup.
Fixes: 956d510ee78 ("block: add disk/bio-based accounting helpers")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
irq_data_get_irq_chip() can return NULL, however it is expected that this
never happens. If a buggy driver leads to NULL being returned from
irq_data_get_irq_chip(), warn about it instead of crashing the machine.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-arm-kernel@lists.infradead.org
|
|
<yibin.gong@nxp.com>:
There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
transfer to be send twice in DMA mode. Please get more information from:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding
new sdma ram script which works in XCH mode as PIO inside sdma instead
of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0. The issue should be
exist on all legacy i.mx6/7 soc family before i.mx6ul.
NXP fix this design issue from i.mx6ul, so newer chips including i.mx6ul/
6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8 chips
still need this workaroud. This patch set add new 'fsl,imx6ul-ecspi'
for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need errata
or not.
The first two reverted patches should be the same issue, though, it
seems 'fixed' by changing to other shp script. Hope Sean or Sascha could
have the chance to test this patch set if could fix their issues.
Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work
on i.mx8mm because the event id is zero.
PS:
Please get sdma firmware from below linux-firmware and copy it to your
local rootfs /lib/firmware/imx/sdma.
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma
v2:
1.Add commit log for reverted patches.
2.Add comment for 'ecspi_fixed' in sdma driver.
3.Add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
rather than remove.
v3:
1.Confirm with design team make sure ERR009165 fixed on i.mx6ul/i.mx6ull
/i.mx6sll, not fixed on i.mx8m/8mm and other i.mx6/7 legacy chips.
Correct dts related dts patch in v2.
2.Clean eratta information in binding doc and new 'tx_glitch_fixed' flag
in spi-imx driver to state ERR009165 fixed or not.
3.Enlarge burst size to fifo size for tx since tx_wml set to 0 in the
errata workaroud, thus improve performance as possible.
v4:
1.Add Ack tag from Mark and Vinod
2.Remove checking 'event_id1' zero as 'event_id0'.
v5:
1.Add the last patch for compatible with the current uart driver which
using rom script, so both uart ram script and rom script supported
in latest firmware, by default uart rom script used. UART driver
will be broken without this patch.
v6:
1.Resend after rebase the latest next branch.
2.Remove below No.13~No.15 patches of v5 because they were mergered.
ARM: dts: imx6ul: add dma support on ecspi
ARM: dts: imx6sll: correct sdma compatible
arm64: defconfig: Enable SDMA on i.mx8mq/8mm
3.Revert "dmaengine: imx-sdma: fix context cache" since
'context_loaded' removed.
v7:
1.Put the last patch 13/13 'Revert "dmaengine: imx-sdma: fix context
cache"' to the ahead of 03/13 'Revert "dmaengine: imx-sdma: refine
to load context only once" so that no building waring during comes out
during bisect.
2.Address Sascha's comments, including eliminating any i.mx6sx in this
series, adding new 'is_imx6ul_ecspi()' instead imx in imx51 and taking
care SMC bit for PIO.
3.Add back missing 'Reviewed-by' tag on 08/15(v5):09/13(v7)
'spi: imx: add new i.mx6ul compatible name in binding doc'
v8:
1.remove 0003-Revert-dmaengine-imx-sdma-fix-context-cache.patch and merge
it into 04/13 of v7
2.add 0005-spi-imx-fallback-to-PIO-if-dma-setup-failure.patch for no any
ecspi function broken even if sdma firmware not updated.
3.merge 'tx.dst_maxburst' changes in the two continous patches into one
patch to avoid confusion.
4.fix typo 'duplicated'.
Robin Gong (13):
Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
Revert "dmaengine: imx-sdma: refine to load context only once"
dmaengine: imx-sdma: remove duplicated sdma_load_context
spi: imx: fallback to PIO if dma setup failure
dmaengine: imx-sdma: add mcu_2_ecspi script
spi: imx: fix ERR009165
spi: imx: remove ERR009165 workaround on i.mx6ul
spi: imx: add new i.mx6ul compatible name in binding doc
dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
dma: imx-sdma: add i.mx6ul compatible name
dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
dmaengine: imx-sdma: add uart rom script
.../devicetree/bindings/dma/fsl-imx-sdma.txt | 1 +
.../devicetree/bindings/spi/fsl-imx-cspi.txt | 1 +
arch/arm/boot/dts/imx6q.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl.dtsi | 8 +-
drivers/dma/imx-sdma.c | 67 ++++++++++------
drivers/spi/spi-imx.c | 92 +++++++++++++++++++---
include/linux/platform_data/dma-imx-sdma.h | 8 +-
7 files changed, 135 insertions(+), 44 deletions(-)
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20200523124758.28604-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20200523122909.25247-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20200523125704.30300-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fallback to PIO in case dma setup failed. For example, sdma firmware not
updated but ERR009165 workaroud added in kernel.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/1590006865-20900-6-git-send-email-yibin.gong@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit
987053a30016 ("efi/x86: Move command-line initrd loading to efi_main")
moved the command-line initrd loading into efi_main(), with a check
to ensure that it was attempted only if the EFI stub was booted via
efi_pe_entry rather than the EFI handover entry.
However, in the case where it was booted via handover entry, and thus an
initrd may have already been loaded by the bootloader, it then wrote 0
for the initrd address and size, removing any existing initrd.
Fix this by checking if size is positive before setting the fields in
the bootparams structure.
Fixes: 987053a30016 ("efi/x86: Move command-line initrd loading to efi_main")
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lkml.kernel.org/r/20200527232602.21596-1-nivedita@alum.mit.edu
|
|
The general comment about keeping the enum order in sync
with the save/restore code has been obsolete for many years now.
Just drop it.
Note that there are other ordering requirements in the enum,
such as the PtrAuth and PMU registers, which are still valid.
Reported-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We currently assume that an exception is delivered to EL1, always.
Once we emulate EL2, this no longer will be the case. To prepare
for this, add a target_mode parameter.
While we're at it, merge the computing of the target PC and PSTATE in
a single function that updates both PC and CPSR after saving their
previous values in the corresponding ELR/SPSR. This ensures that they
are updated in the correct order (a pretty common source of bugs...).
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We always preallocate a data extent for writing a free space cache, which
causes writeback to always try the nocow path first, since the free space
inode has the prealloc bit set in its flags.
However if the block group that contains the data extent for the space
cache has been turned to RO mode due to a running scrub or balance for
example, we have to fallback to the cow path. In that case once a new data
extent is allocated we end up calling btrfs_add_reserved_bytes(), which
decrements the counter named bytes_may_use from the data space_info object
with the expection that this counter was previously incremented with the
same amount (the size of the data extent).
However when we started writeout of the space cache at cache_save_setup(),
we incremented the value of the bytes_may_use counter through a call to
btrfs_check_data_free_space() and then decremented it through a call to
btrfs_prealloc_file_range_trans() immediately after. So when starting the
writeback if we fallback to cow mode we have to increment the counter
bytes_may_use of the data space_info again to compensate for the extent
allocation done by the cow path.
When this issue happens we are incorrectly decrementing the bytes_may_use
counter and when its current value is smaller then the amount we try to
subtract we end up with the following warning:
------------[ cut here ]------------
WARNING: CPU: 3 PID: 657 at fs/btrfs/space-info.h:115 btrfs_add_reserved_bytes+0x3d6/0x4e0 [btrfs]
Modules linked in: btrfs blake2b_generic xor raid6_pq libcrc32c (...)
CPU: 3 PID: 657 Comm: kworker/u8:7 Tainted: G W 5.6.0-rc7-btrfs-next-58 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Workqueue: writeback wb_workfn (flush-btrfs-1591)
RIP: 0010:btrfs_add_reserved_bytes+0x3d6/0x4e0 [btrfs]
Code: ff ff 48 (...)
RSP: 0000:ffffa41608f13660 EFLAGS: 00010287
RAX: 0000000000001000 RBX: ffff9615b93ae400 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff9615b96ab410
RBP: fffffffffffee000 R08: 0000000000000001 R09: 0000000000000000
R10: ffff961585e62a40 R11: 0000000000000000 R12: ffff9615b96ab400
R13: ffff9615a1a2a000 R14: 0000000000012000 R15: ffff9615b93ae400
FS: 0000000000000000(0000) GS:ffff9615bb200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055cbbc2ae178 CR3: 0000000115794006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
find_free_extent+0x4a0/0x16c0 [btrfs]
btrfs_reserve_extent+0x91/0x180 [btrfs]
cow_file_range+0x12d/0x490 [btrfs]
btrfs_run_delalloc_range+0x9f/0x6d0 [btrfs]
? find_lock_delalloc_range+0x221/0x250 [btrfs]
writepage_delalloc+0xe8/0x150 [btrfs]
__extent_writepage+0xe8/0x4c0 [btrfs]
extent_write_cache_pages+0x237/0x530 [btrfs]
extent_writepages+0x44/0xa0 [btrfs]
do_writepages+0x23/0x80
__writeback_single_inode+0x59/0x700
writeback_sb_inodes+0x267/0x5f0
__writeback_inodes_wb+0x87/0xe0
wb_writeback+0x382/0x590
? wb_workfn+0x4a2/0x6c0
wb_workfn+0x4a2/0x6c0
process_one_work+0x26d/0x6a0
worker_thread+0x4f/0x3e0
? process_one_work+0x6a0/0x6a0
kthread+0x103/0x140
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x3a/0x50
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffffffffb2abdedf>] copy_process+0x74f/0x2020
softirqs last enabled at (0): [<ffffffffb2abdedf>] copy_process+0x74f/0x2020
softirqs last disabled at (0): [<0000000000000000>] 0x0
---[ end trace bd7c03622e0b0a52 ]---
------------[ cut here ]------------
So fix this by incrementing the bytes_may_use counter of the data
space_info when we fallback to the cow path. If the cow path is successful
the counter is decremented after extent allocation (by
btrfs_add_reserved_bytes()), if it fails it ends up being decremented as
well when clearing the delalloc range (extent_clear_unlock_delalloc()).
This could be triggered sporadically by the test case btrfs/061 from
fstests.
Fixes: 82d5902d9c681b ("Btrfs: Support reading/writing on disk free ino cache")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When doing a buffered write we always try to reserve data space for it,
even when the file has the NOCOW bit set or the write falls into a file
range covered by a prealloc extent. This is done both because it is
expensive to check if we can do a nocow write (checking if an extent is
shared through reflinks or if there's a hole in the range for example),
and because when writeback starts we might actually need to fallback to
COW mode (for example the block group containing the target extents was
turned into RO mode due to a scrub or balance).
When we are unable to reserve data space we check if we can do a nocow
write, and if we can, we proceed with dirtying the pages and setting up
the range for delalloc. In this case the bytes_may_use counter of the
data space_info object is not incremented, unlike in the case where we
are able to reserve data space (done through btrfs_check_data_free_space()
which calls btrfs_alloc_data_chunk_ondemand()).
Later when running delalloc we attempt to start writeback in nocow mode
but we might revert back to cow mode, for example because in the meanwhile
a block group was turned into RO mode by a scrub or relocation. The cow
path after successfully allocating an extent ends up calling
btrfs_add_reserved_bytes(), which expects the bytes_may_use counter of
the data space_info object to have been incremented before - but we did
not do it when the buffered write started, since there was not enough
available data space. So btrfs_add_reserved_bytes() ends up decrementing
the bytes_may_use counter anyway, and when the counter's current value
is smaller then the size of the allocated extent we get a stack trace
like the following:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 20138 at fs/btrfs/space-info.h:115 btrfs_add_reserved_bytes+0x3d6/0x4e0 [btrfs]
Modules linked in: btrfs blake2b_generic xor raid6_pq libcrc32c (...)
CPU: 0 PID: 20138 Comm: kworker/u8:15 Not tainted 5.6.0-rc7-btrfs-next-58 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Workqueue: writeback wb_workfn (flush-btrfs-1754)
RIP: 0010:btrfs_add_reserved_bytes+0x3d6/0x4e0 [btrfs]
Code: ff ff 48 (...)
RSP: 0018:ffffbda18a4b3568 EFLAGS: 00010287
RAX: 0000000000000000 RBX: ffff9ca076f5d800 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff9ca068470410
RBP: fffffffffffff000 R08: 0000000000000001 R09: 0000000000000000
R10: ffff9ca079d58040 R11: 0000000000000000 R12: ffff9ca068470400
R13: ffff9ca0408b2000 R14: 0000000000001000 R15: ffff9ca076f5d800
FS: 0000000000000000(0000) GS:ffff9ca07a600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005605dbfe7048 CR3: 0000000138570006 CR4: 00000000003606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
find_free_extent+0x4a0/0x16c0 [btrfs]
btrfs_reserve_extent+0x91/0x180 [btrfs]
cow_file_range+0x12d/0x490 [btrfs]
run_delalloc_nocow+0x341/0xa40 [btrfs]
btrfs_run_delalloc_range+0x1ea/0x6d0 [btrfs]
? find_lock_delalloc_range+0x221/0x250 [btrfs]
writepage_delalloc+0xe8/0x150 [btrfs]
__extent_writepage+0xe8/0x4c0 [btrfs]
extent_write_cache_pages+0x237/0x530 [btrfs]
? btrfs_wq_submit_bio+0x9f/0xc0 [btrfs]
extent_writepages+0x44/0xa0 [btrfs]
do_writepages+0x23/0x80
__writeback_single_inode+0x59/0x700
writeback_sb_inodes+0x267/0x5f0
__writeback_inodes_wb+0x87/0xe0
wb_writeback+0x382/0x590
? wb_workfn+0x4a2/0x6c0
wb_workfn+0x4a2/0x6c0
process_one_work+0x26d/0x6a0
worker_thread+0x4f/0x3e0
? process_one_work+0x6a0/0x6a0
kthread+0x103/0x140
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x3a/0x50
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffffffff94ebdedf>] copy_process+0x74f/0x2020
softirqs last enabled at (0): [<ffffffff94ebdedf>] copy_process+0x74f/0x2020
softirqs last disabled at (0): [<0000000000000000>] 0x0
---[ end trace f9f6ef8ec4cd8ec9 ]---
So to fix this, when falling back into cow mode check if space was not
reserved, by testing for the bit EXTENT_NORESERVE in the respective file
range, and if not, increment the bytes_may_use counter for the data
space_info object. Also clear the EXTENT_NORESERVE bit from the range, so
that if the cow path fails it decrements the bytes_may_use counter when
clearing the delalloc range (through the btrfs_clear_delalloc_extent()
callback).
Fixes: 7ee9e4405f264e ("Btrfs: check if we can nocow if we don't have data space")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If an error happens while running dellaloc in COW mode for a range, we can
end up calling extent_clear_unlock_delalloc() for a range that goes beyond
our range's end offset by 1 byte, which affects 1 extra page. This results
in clearing bits and doing page operations (such as a page unlock) outside
our target range.
Fix that by calling extent_clear_unlock_delalloc() with an inclusive end
offset, instead of an exclusive end offset, at cow_file_range().
Fixes: a315e68f6e8b30 ("Btrfs: fix invalid attempt to free reserved space on failure to cow range")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The local 'b' variable is only used to directly read values from passed
extent buffer. So eliminate it and directly use the input parameter.
Furthermore this shrinks the size of the following functions:
./scripts/bloat-o-meter ctree.orig fs/btrfs/ctree.o
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-73 (-73)
Function old new delta
read_block_for_search.isra 876 871 -5
push_node_left 1112 1044 -68
Total: Before=50348, After=50275, chg -0.14%
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This function wraps the optimisation implemented by d7396f07358a
("Btrfs: optimize key searches in btrfs_search_slot") however this
optimisation is really used in only one place - btrfs_search_slot.
Just open code the optimisation and also add a comment explaining how it
works since it's not clear just by looking at the code - the key point
here is it depends on an internal invariant that BTRFS' btree provides,
namely intermediate pointers always contain the key at slot0 at the
child node. So in the case of exact match we can safely assume that the
given key will always be in slot 0 on lower levels.
Furthermore this results in a reduction of btrfs_search_slot's size:
./scripts/bloat-o-meter ctree.orig fs/btrfs/ctree.o
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-75 (-75)
Function old new delta
btrfs_search_slot 2783 2708 -75
Total: Before=50423, After=50348, chg -0.15%
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The read and write versions don't have anything in common except for the
call to iomap_dio_rw. So split this function, and merge each half into
its only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since we now perform direct reads using i_rwsem, we can remove this
inode flag used to co-ordinate unlocked reads.
The truncate call takes i_rwsem. This means it is correctly synchronized
with concurrent direct reads.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since we removed the last user of dio_end_io(), remove the helper
function dio_end_io().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Switch from __blockdev_direct_IO() to iomap_dio_rw().
Rename btrfs_get_blocks_direct() to btrfs_dio_iomap_begin() and use it
as iomap_begin() for iomap direct I/O functions. This function
allocates and locks all the blocks required for the I/O.
btrfs_submit_direct() is used as the submit_io() hook for direct I/O
ops.
Since we need direct I/O reads to go through iomap_dio_rw(), we change
file_operations.read_iter() to a btrfs_file_read_iter() which calls
btrfs_direct_IO() for direct reads and falls back to
generic_file_buffered_read() for incomplete reads and buffered reads.
We don't need address_space.direct_IO() anymore so set it to noop.
Similarly, we don't need flags used in __blockdev_direct_IO(). iomap is
capable of direct I/O reads from a hole, so we don't need to return
-ENOENT.
BTRFS direct I/O is now done under i_rwsem, shared in case of reads and
exclusive in case of writes. This guards against simultaneous truncates.
Use iomap->iomap_end() to check for failed or incomplete direct I/O:
- for writes, call __endio_write_update_ordered()
- for reads, unlock extents
btrfs_dio_data is now hooked in iomap->private and not
current->journal_info. It carries the reservation variable and the
amount of data submitted, so we can calculate the amount of data to call
__endio_write_update_ordered in case of an error.
This patch removes last use of struct buffer_head from btrfs.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object. Previous
commit "b8eb718348b8" fixed a similar problem.
Fixes: 158c998ea44b ("ACPI / CPPC: add sysfs support to compute delivered performance")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Cc: 4.10+ <stable@vger.kernel.org> # 4.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
kobject_init_and_add() takes reference even when it fails.
Thus, when kobject_init_and_add() returns an error,
kobject_put() must be called to properly clean up the kobject.
Fixes: 3f8055c35836 ("ACPI / hotplug: Introduce user space interface for hotplug profiles")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After commit 6423e59a64e7 ("MIPS: Loongson64: Switch to generic PCI
driver"), arch/mips/loongson64/pci.c is not used any more, remove it.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
If boot_secondary() was successful, and cpu_online() was an error in
__cpu_up(), -EIO was returned, but 0 is returned by commit d22b115cbfbb7
("arm64/kernel: Simplify __cpu_up() by bailing out early").
Therefore, bringup_wait_for_ap() causes the primary core to wait for a
long time, which may cause boot failure.
This commit sets -EIO to return code under the same conditions.
Fixes: d22b115cbfbb ("arm64/kernel: Simplify __cpu_up() by bailing out early")
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Tested-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Acked-by: Will Deacon <will@kernel.org>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200527233457.2531118-1-nobuhiro1.iwamatsu@toshiba.co.jp
[catalin.marinas@arm.com: return -EIO at the end of the function]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Keeping empty structure as the vcpu state initializer is slightly
wasteful: we only want to set pstate, and zero everything else.
Just do that.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Our sysreg reset check has become a bit silly, as it only checks whether
a reset callback actually exists for a given sysreg entry, and apply the
method if available. Doing the check at each vcpu reset is pretty dumb,
as the tables never change. It is thus perfectly possible to do the same
checks at boot time.
This also allows us to introduce a sparse sys_regs[] array, something
that will be required with ARMv8.4-NV.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As we're about to become a bit more harsh when it comes to the lack of
reset callbacks, let's add the missing PMU reset handlers. Note that
these only cover *CLR registers that were always covered by their *SET
counterpart, so there is no semantic change here.
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Extract the direct HW accessors for later reuse.
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
If we move the used_lrs field to the version-specific cpu interface
structure, the following functions only operate on the struct
vgic_v3_cpu_if and not the full vcpu:
__vgic_v3_save_state
__vgic_v3_restore_state
__vgic_v3_activate_traps
__vgic_v3_deactivate_traps
__vgic_v3_save_aprs
__vgic_v3_restore_aprs
This is going to be very useful for nested virt, so move the used_lrs
field and change the prototypes and implementations of these functions to
take the cpu_if parameter directly.
No functional change.
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Marvell SDIO device ID 0x9134 is used in SDIO Common CIS (Card Information
Structure) and not in SDIO wlan function (with ID 1). SDIO Common CIS is
accessed by function ID 0.
So change this misleading macro name to SDIO_DEVICE_ID_MARVELL_8887_F0 as
it does not refer to wlan function. It refers to function 0.
Wlan module on this SDIO card is available at function ID 1 and is
identified by different SDIO device ID 0x9135. Kernel quirks for SDIO
devices are matched against device ID from SDIO Common CIS. Therefore
device ID used in quirk is correct, just has misleading name.
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20200522144412.19712-2-pali@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
