summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-01wifi: ath12k: Support TQM statsDinesh Karthikeyan
Add support to request pdev TQM stats from firmware through HTT stats type 6. This stat type gives information such as TQM error, MPDU related information and TQM pdev stats. Sample output: ------------- echo 6 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_TQM_ERROR_STATS_TLV: q_empty_failure = 0 q_not_empty_failure = 0 add_msdu_failure = 0 TQM_ERROR_RESET_STATS: tqm_cache_ctl_err = 0 tqm_soft_reset = 0 tqm_reset_total_num_in_use_link_descs = 0 ..... HTT_TX_TQM_GEN_MPDU_STATS_TLV: gen_mpdu_end_reason = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0 HTT_TX_TQM_LIST_MPDU_STATS_TLV: list_mpdu_end_reason = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0 HTT_TX_TQM_LIST_MPDU_CNT_TLV_V: list_mpdu_cnt_hist = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 HTT_TX_TQM_PDEV_STATS_TLV_V: msdu_count = 0 mpdu_count = 0 remove_msdu = 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240625042217.1303332-4-quic_rdevanat@quicinc.com
2024-07-01wifi: ath12k: Support pdev error statsDinesh Karthikeyan
Add support to request pdev error stats from firmware through HTT stats type 5. This stats type gives information such as list of pdev errors, reasons for reset, logging information about recovery, drain and war stats. etc. Sample output: ------------- echo 5 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_HW_STATS_PDEV_ERRS_TLV: mac_id = 0 tx_abort = 0 tx_abort_fail_count = 0 rx_abort = 53 ..... PDEV_PHY_WARM_RESET_REASONS: phy_warm_reset_reason_phy_m3 = 0 phy_warm_reset_reason_tx_hw_stuck = 0 phy_warm_reset_reason_num_cca_rx_frame_stuck = 0 ..... WAL_RX_RECOVERY_STATS: wal_rx_recovery_rst_mac_hang_count = 0 wal_rx_recovery_rst_known_sig_count = 0 wal_rx_recovery_rst_no_rx_count = 0 ..... HTT_RX_DEST_DRAIN_STATS: rx_dest_drain_rx_descs_leak_prevention_done = 0 rx_dest_drain_rx_descs_saved_cnt = 0 rx_dest_drain_rxdma2reo_leak_detected = 0 ..... HTT_HW_STATS_INTR_MISC_TLV: hw_intr_name = AMPI mask = 0 count = 2 HTT_HW_STATS_WHAL_TX_TLV: mac_id = 0 last_unpause_ppdu_id = 0 hwsch_unpause_wait_tqm_write = 0 ..... HTT_HW_WAR_STATS_TLV: mac_id = 0 hw_war 0 = 0 hw_war 1 = 0 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240625042217.1303332-3-quic_rdevanat@quicinc.com
2024-07-01wifi: ath12k: Support Transmit Scheduler statsDinesh Karthikeyan
Add support to request transmission scheduler stats from firmware through HTT stats type 4. This stat gives information such as pdev stats scheduled per transmission queue, transmission queue command posted and reaped, scheduler order, scheduler ineligibility and supercycle triggers. Sample output: ------------- echo 4 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_STATS_TX_SCHED_CMN_TLV: mac_id = 0 current_timestamp = 952546828 HTT_TX_PDEV_STATS_SCHED_PER_TXQ_TLV: mac_id = 0 txq_id = 14 sched_policy = 2 ..... HTT_SCHED_TXQ_CMD_POSTED_TLV: sched_cmd_posted = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0 HTT_SCHED_TXQ_CMD_REAPED_TLV: sched_cmd_reaped = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0 HTT_SCHED_TXQ_SCHED_ORDER_SU_TLV: sched_order_su = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0 HTT_SCHED_TXQ_SCHED_INELIGIBILITY: sched_ineligibility = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0 HTT_SCHED_TXQ_SUPERCYCLE_TRIGGER: supercycle_triggers = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240625042217.1303332-2-quic_rdevanat@quicinc.com
2024-07-01wifi: ath12k: Dump additional Tx PDEV HTT statsRamya Gnanasekar
Support to dump additional Tx PDEV stats through HTT stats debugfs. Following stats dump are supported: 1. PDEV control path stat to dump Tx management frame count 2. Tx PDEV SIFS histogram stats 3. Tx MU MIMO PPDU stats for 802.11ac, 802.11ax and 802.11be Sample Output: --------------- echo 1 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_PDEV_STATS_CMN_TLV: mac_id = 0 comp_delivered = 0 self_triggers = 13 ...... ...... HTT_TX_PDEV_STATS_CTRL_PATH_TX_STATS: fw_tx_mgmt_subtype = 0:1, 1:0, 2:0, 3:0, 4:38, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:1, 12:0, 13:7, 14:0, 15:0 HTT_TX_PDEV_STATS_SIFS_HIST_TLV: sifs_hist_status = 0:237, 1:185, 2:1, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 HTT_TX_PDEV_AC_MU_PPDU_DISTRIBUTION_STATS: ac_mu_mimo_num_seq_posted_nr4 = 0 ac_mu_mimo_num_ppdu_posted_per_burst_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ac_mu_mimo_num_ppdu_completed_per_burst_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ac_mu_mimo_num_seq_term_status_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ac_mu_mimo_num_seq_posted_nr8 = 0 ac_mu_mimo_num_ppdu_posted_per_burst_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ac_mu_mimo_num_ppdu_completed_per_burst_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ac_mu_mimo_num_seq_term_status_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 HTT_TX_PDEV_AX_MU_PPDU_DISTRIBUTION_STATS: ax_mu_mimo_num_seq_posted_nr4 = 0 ax_mu_mimo_num_ppdu_posted_per_burst_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ax_mu_mimo_num_ppdu_completed_per_burst_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ax_mu_mimo_num_seq_term_status_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 ax_mu_mimo_num_seq_posted_nr8 = 0 ax_mu_mimo_num_ppdu_posted_per_burst_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ax_mu_mimo_num_ppdu_completed_per_burst_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 ax_mu_mimo_num_seq_term_status_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 HTT_TX_PDEV_BE_MU_PPDU_DISTRIBUTION_STATS: be_mu_mimo_num_seq_posted_nr4 = 0 be_mu_mimo_num_ppdu_posted_per_burst_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 be_mu_mimo_num_ppdu_completed_per_burst_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 be_mu_mimo_num_seq_term_status_nr4 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 be_mu_mimo_num_seq_posted_nr8 = 0 be_mu_mimo_num_ppdu_posted_per_burst_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 be_mu_mimo_num_ppdu_completed_per_burst_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0 be_mu_mimo_num_seq_term_status_nr8 = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240626085854.2500681-5-quic_rgnanase@quicinc.com
2024-07-01wifi: ath12k: Add support to parse requested stats_typeDinesh Karthikeyan
Add extended htt stats parser and print the corresponding TLVs associated with the requested htt_stats_type. Add support for TX PDEV related htt stats. Sample output: -------------- echo 1 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats HTT_TX_PDEV_STATS_CMN_TLV: mac_id = 0 comp_delivered = 0 self_triggers = 256 hw_queued = 275 hw_reaped = 275 underrun = 241 hw_paused = 0 hw_flush = 0 hw_filt = 1 tx_abort = 0 ppdu_ok = 246 mpdu_requeued = 0 tx_xretry = 0 data_rc = 3 mpdu_dropped_xretry = 0 illegal_rate_phy_err = 0 cont_xretry = 0 tx_timeout = 0 tx_time_dur_data = 0 pdev_resets = 0 phy_underrun = 0 txop_ovf = 0 seq_posted = 247 seq_failed_queueing = 0 seq_completed = 247 seq_restarted = 0 seq_txop_repost_stop = 0 next_seq_cancel = 0 dl_mu_mimo_seq_posted = 0 dl_mu_ofdma_seq_posted = 0 ul_mu_mimo_seq_posted = 0 ul_mu_ofdma_seq_posted = 0 mu_mimo_peer_blacklisted = 0 seq_qdepth_repost_stop = 0 seq_min_msdu_repost_stop = 0 mu_seq_min_msdu_repost_stop = 0 seq_switch_hw_paused = 0 next_seq_posted_dsr = 0 seq_posted_isr = 0 seq_ctrl_cached = 0 mpdu_count_tqm = 0 msdu_count_tqm = 0 mpdu_removed_tqm = 0 msdu_removed_tqm = 0 remove_mpdus_max_retries = 0 mpdus_sw_flush = 0 mpdus_hw_filter = 0 mpdus_truncated = 0 mpdus_ack_failed = 0 mpdus_expired = 0 mpdus_seq_hw_retry = 0 ack_tlv_proc = 0 coex_abort_mpdu_cnt_valid = 0 coex_abort_mpdu_cnt = 5 num_total_ppdus_tried_ota = 5 num_data_ppdus_tried_ota = 0 local_ctrl_mgmt_enqued = 247 local_ctrl_mgmt_freed = 247 local_data_enqued = 0 local_data_freed = 0 mpdu_tried = 0 isr_wait_seq_posted = 0 tx_active_dur_us_low = 0 tx_active_dur_us_high = 0 fes_offsets_err_cnt = 0 HTT_TX_PDEV_STATS_URRN_TLV: urrn_stats = 0:0, 1:241, 2:0 HTT_TX_PDEV_STATS_SIFS_TLV: sifs_status = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0 HTT_TX_PDEV_STATS_FLUSH_TLV: flush_errs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0, 17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0, 38:0, 39:0, 40:0, 41:0, 42:0, 43:0, 44:0, 45:0, 46:0, 47:0, 48:0, 49:0, 50:0, 51:0, 52:0, 53:0, 54:0, 55:0, 56:0, 57:0, 58:0, 59:0, 60:0, 61:0, 62:0, 63:0, 64:0, 65:0, 66:0, 67:0, 68:0, 69:0, 70:0, 71:0, 72:0, 73:0, 74:0, 75:0, 76:0, 77:0, 78:0, 79:0, 80:0, 81:0, 82:0, 83:0, 84:0, 85:0, 86:0, 87:0, 88:0, 89:0, 90:0, 91:0, 92:0, 93:0, 94:0, 95:0, 96:0, 97:0, 98:0, 99:0, 100:0, 101:0, 102:0, 103:0, 104:0, 105:0, 106:0, 107:0, 108:0, 109:0, 110:0, 111:0, 112:0, 113:0, 114:0, 115:0, 116:0, 117:0, 118:0, 119:0, 120:0, 121:0, 122:0, 123:0, 124:0, 125:0, 126:0, 127:0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240626085854.2500681-4-quic_rgnanase@quicinc.com
2024-07-01wifi: ath12k: Add htt_stats_dump file ops supportDinesh Karthikeyan
Add dump_htt_stats file operation to dump the stats value requested for the requested stats_type. Stats sent from firmware will be cumulative. Hence add debugfs to reset the requested stats type. Example with one ath12k device: ath12k `-- pci-0000:06:00.0 |-- mac0 `-- htt_stats |-- htt_stats_type |-- htt_stats_reset Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240626085854.2500681-3-quic_rgnanase@quicinc.com
2024-07-01wifi: ath12k: Add support to enable debugfs_htt_statsDinesh Karthikeyan
Create debugfs_htt_stats file when ath12k debugfs support is enabled. Add basic ath12k_debugfs_htt_stats_register and handle htt_stats_type file operations. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240626085854.2500681-2-quic_rgnanase@quicinc.com
2024-07-01documentation: Fix riscv cmodx exampleCharlie Jenkins
ON/OFF in the keys was swapped between the first and second argument of the prctl. The prctl key is always PR_RISCV_SET_ICACHE_FLUSH_CTX, and the second argument can be PR_RISCV_CTX_SW_FENCEI_ON or PR_RISCV_CTX_SW_FENCEI_OFF. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Fixes: 6a08e4709c58 ("documentation: Document PR_RISCV_SET_ICACHE_FLUSH_CTX prctl") Link: https://lore.kernel.org/r/20240628-fix_cmodx_example-v1-1-e6c6523bc163@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-07-01Merge tag 'asm-generic-fixes-6.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fix from Arnd Bergmann: "This fixes up a last minute build regression from the previous set of bug fixes" * tag 'asm-generic-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: syscalls: fix sys_fanotify_mark prototype
2024-07-01Merge tag 'arm-fixes-6.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC fixes from Arnd Bergmann: "A number of devicetree fixes came in for the rockchip platforms, correcting some of the address information, and reverting a change to the MMC controller configuration that caused regressions. Four drivers have one code change each, addressing minor build issues for the optee firmware driver, the litex SoC platform driver and two reset drivers. The riscv fixes as also simple, mainly turning off device nodes in the canaan dts files unless they are actually usable on a particular board. Finally, Drew takes over maintaining the THEAD RISC-V SoC platform" * tag 'arm-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: drivers/soc/litex: drop obsolete dependency on COMPILE_TEST tee: optee: ffa: Fix missing-field-initializers warning arm64: dts: rockchip: Add sound-dai-cells for RK3368 arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi 4B reset: hisilicon: hi6220: add missing MODULE_DESCRIPTION() macro reset: gpio: Fix missing gpiolib dependency for GPIO reset controller MAINTAINERS: thead: update Maintainer arm64: dts: rockchip: fix PMIC interrupt pin on ROCK Pi E riscv: dts: starfive: Set EMMC vqmmc maximum voltage to 3.3V on JH7110 boards arm64: dts: rockchip: make poweroff(8) work on Radxa ROCK 5A Revert "arm64: dts: rockchip: remove redundant cd-gpios from rk3588 sdmmc nodes" ARM: dts: rockchip: rk3066a: add #sound-dai-cells to hdmi node arm64: dts: rockchip: Fix the value of `dlg,jack-det-rate` mismatch on rk3399-gru arm64: dts: rockchip: set correct pwm0 pinctrl on rk3588-tiger riscv: dts: canaan: Disable I/O devices unless used riscv: dts: canaan: Clean up serial aliases arm64: dts: rockchip: Rename LED related pinctrl nodes on rk3308-rock-pi-s arm64: dts: rockchip: Fix SD NAND and eMMC init on rk3308-rock-pi-s arm64: dts: rockchip: Fix rk3308 codec@ff560000 reset-names arm64: dts: rockchip: Fix the DCDC_REG2 minimum voltage on Quartz64 Model B
2024-07-01Merge tag 'mtd/fixes-for-6.10-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fixes from Miquel Raynal: - Rockchip NAND controller driver was not checking the timings properly and the introduction of NV-DDR support broke it. - The core was also misbehaving in some very specific cases: in case of (unlikely) bitflips in the parameter page, the fallback might have failed as well but for software reasons. - Finally, the chosen ECC configuration was no longer properly propagated to upper layers, mostly failing an info message at probe time. * tag 'mtd/fixes-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: rockchip: ensure NVDDR timings are rejected mtd: rawnand: Bypass a couple of sanity checks during NAND identification mtd: rawnand: Fix the nand_read_data_op() early check mtd: rawnand: Ensure ECC configuration is propagated to upper layers
2024-07-01Merge tag 'vfs-6.10-rc7.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: "Misc: - Don't misleadingly warn during filesystem thaw operations. It's possible that a block device which was frozen before it was mounted can cause a failing thaw operation if someone concurrently tried to mount it while that thaw operation was issued and the device had already been temporarily claimed for the mount (The mount will of course be aborted because the device is frozen). netfs: - Fix io_uring based write-through. Make sure that the total request length is correctly set. - Fix partial writes to folio tail. - Remove some xarray helpers that were intended for bounce buffers which got defered to a later patch series. - Make netfs_page_mkwrite() whether folio->mapping is vallid after acquiring the folio lock. - Make netfs_page_mkrite() flush conflicting data instead of waiting. fsnotify: - Ensure that fsnotify creation events are generated before fsnotify open events when a file is created via ->atomic_open(). The ordering was broken before. - Ensure that no fsnotify events are generated for O_PATH file descriptors. While no fsnotify open events were generated, fsnotify close events were. Make it consistent and don't produce any" * tag 'vfs-6.10-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: netfs: Fix netfs_page_mkwrite() to flush conflicting data, not wait netfs: Fix netfs_page_mkwrite() to check folio->mapping is valid netfs: Delete some xarray-wangling functions that aren't used netfs: Fix early issue of write op on partial write to folio tail netfs: Fix io_uring based write-through vfs: generate FS_CREATE before FS_OPEN when ->atomic_open used. fsnotify: Do not generate events for O_PATH file descriptors fs: don't misleadingly warn during thaw operations
2024-07-01cpufreq: ACPI: Mark boost policy as enabled when setting boostMario Limonciello
When boost is set for CPUs using acpi-cpufreq, the policy is not updated which can cause boost to be incorrectly not reported. Fixes: 218a06a79d9a ("cpufreq: Support per-policy performance boost") Link: https://patch.msgid.link/20240626204723.6237-2-mario.limonciello@amd.com Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-07-01cpufreq: Allow drivers to advertise boost enabledMario Limonciello
The behavior introduced in commit f37a4d6b4a2c ("cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw()") sets up the boost policy incorrectly when boost has been enabled by the platform firmware initially even if a driver sets the policy up. This is because policy_has_boost_freq() assumes that there is a frequency table set up by the driver and that the boost frequencies are advertised in that table. This assumption doesn't work for acpi-cpufreq or amd-pstate. Only use this check to enable boost if it's not already enabled instead of also disabling it if alreayd enabled. Fixes: f37a4d6b4a2c ("cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw()") Link: https://patch.msgid.link/20240626204723.6237-1-mario.limonciello@amd.com Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-07-01btrfs: fix adding block group to a reclaim list and the unused list during ↵Naohiro Aota
reclaim There is a potential parallel list adding for retrying in btrfs_reclaim_bgs_work and adding to the unused list. Since the block group is removed from the reclaim list and it is on a relocation work, it can be added into the unused list in parallel. When that happens, adding it to the reclaim list will corrupt the list head and trigger list corruption like below. Fix it by taking fs_info->unused_bgs_lock. [177.504][T2585409] BTRFS error (device nullb1): error relocating ch= unk 2415919104 [177.514][T2585409] list_del corruption. next->prev should be ff1100= 0344b119c0, but was ff11000377e87c70. (next=3Dff110002390cd9c0) [177.529][T2585409] ------------[ cut here ]------------ [177.537][T2585409] kernel BUG at lib/list_debug.c:65! [177.545][T2585409] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI [177.555][T2585409] CPU: 9 PID: 2585409 Comm: kworker/u128:2 Tainted: G W 6.10.0-rc5-kts #1 [177.568][T2585409] Hardware name: Supermicro SYS-520P-WTR/X12SPW-TF, BIOS 1.2 02/14/2022 [177.579][T2585409] Workqueue: events_unbound btrfs_reclaim_bgs_work[btrfs] [177.589][T2585409] RIP: 0010:__list_del_entry_valid_or_report.cold+0x70/0x72 [177.624][T2585409] RSP: 0018:ff11000377e87a70 EFLAGS: 00010286 [177.633][T2585409] RAX: 000000000000006d RBX: ff11000344b119c0 RCX:0000000000000000 [177.644][T2585409] RDX: 000000000000006d RSI: 0000000000000008 RDI:ffe21c006efd0f40 [177.655][T2585409] RBP: ff110002e0509f78 R08: 0000000000000001 R09:ffe21c006efd0f08 [177.665][T2585409] R10: ff11000377e87847 R11: 0000000000000000 R12:ff110002390cd9c0 [177.676][T2585409] R13: ff11000344b119c0 R14: ff110002e0508000 R15:dffffc0000000000 [177.687][T2585409] FS: 0000000000000000(0000) GS:ff11000fec880000(0000) knlGS:0000000000000000 [177.700][T2585409] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [177.709][T2585409] CR2: 00007f06bc7b1978 CR3: 0000001021e86005 CR4:0000000000771ef0 [177.720][T2585409] DR0: 0000000000000000 DR1: 0000000000000000 DR2:0000000000000000 [177.731][T2585409] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:0000000000000400 [177.742][T2585409] PKRU: 55555554 [177.748][T2585409] Call Trace: [177.753][T2585409] <TASK> [177.759][T2585409] ? __die_body.cold+0x19/0x27 [177.766][T2585409] ? die+0x2e/0x50 [177.772][T2585409] ? do_trap+0x1ea/0x2d0 [177.779][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.788][T2585409] ? do_error_trap+0xa3/0x160 [177.795][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.805][T2585409] ? handle_invalid_op+0x2c/0x40 [177.812][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.820][T2585409] ? exc_invalid_op+0x2d/0x40 [177.827][T2585409] ? asm_exc_invalid_op+0x1a/0x20 [177.834][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.843][T2585409] btrfs_delete_unused_bgs+0x3d9/0x14c0 [btrfs] There is a similar retry_list code in btrfs_delete_unused_bgs(), but it is safe, AFAICS. Since the block group was in the unused list, the used bytes should be 0 when it was added to the unused list. Then, it checks block_group->{used,reserved,pinned} are still 0 under the block_group->lock. So, they should be still eligible for the unused list, not the reclaim list. The reason it is safe there it's because because we're holding space_info->groups_sem in write mode. That means no other task can allocate from the block group, so while we are at deleted_unused_bgs() it's not possible for other tasks to allocate and deallocate extents from the block group, so it can't be added to the unused list or the reclaim list by anyone else. The bug can be reproduced by btrfs/166 after a few rounds. In practice this can be hit when relocation cannot find more chunk space and ends with ENOSPC. Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Suggested-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com> Fixes: 4eb4e85c4f81 ("btrfs: retry block group reclaim without infinite loop") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-07-01selftests/bpf: Delete extra blank lines in test_sockmapZhu Jun
Delete extra blank lines inside of test_selftest(). Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240627031905.7133-1-zhujun2@cmss.chinamobile.com
2024-07-01riscv, bpf: Use bpf_prog_pack for RV64 bpf trampolinePu Lehui
We used bpf_prog_pack to aggregate bpf programs into huge page to relieve the iTLB pressure on the system. We can apply it to bpf trampoline, as Song had been implemented it in core and x86 [0]. This patch is going to use bpf_prog_pack to RV64 bpf trampoline. Since Song and Puranjay have done a lot of work for bpf_prog_pack on RV64, implementing this function will be easy. Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Björn Töpel <bjorn@rivosinc.com> #riscv Link: https://lore.kernel.org/all/20231206224054.492250-1-song@kernel.org [0] Link: https://lore.kernel.org/bpf/20240622030437.3973492-4-pulehui@huaweicloud.com
2024-07-01riscv, bpf: Fix out-of-bounds issue when preparing trampoline imagePu Lehui
We get the size of the trampoline image during the dry run phase and allocate memory based on that size. The allocated image will then be populated with instructions during the real patch phase. But after commit 26ef208c209a ("bpf: Use arch_bpf_trampoline_size"), the `im` argument is inconsistent in the dry run and real patch phase. This may cause emit_imm in RV64 to generate a different number of instructions when generating the 'im' address, potentially causing out-of-bounds issues. Let's emit the maximum number of instructions for the "im" address during dry run to fix this problem. Fixes: 26ef208c209a ("bpf: Use arch_bpf_trampoline_size") Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240622030437.3973492-3-pulehui@huaweicloud.com
2024-07-01bpf: Use precise image size for struct_ops trampolinePu Lehui
For trampoline using bpf_prog_pack, we need to generate a rw_image buffer with size of (image_end - image). For regular trampoline, we use the precise image size generated by arch_bpf_trampoline_size to allocate rw_image. But for struct_ops trampoline, we allocate rw_image directly using close to PAGE_SIZE size. We do not need to allocate for that much, as the patch size is usually much smaller than PAGE_SIZE. Let's use precise image size for it too. Signed-off-by: Pu Lehui <pulehui@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Björn Töpel <bjorn@rivosinc.com> #riscv Acked-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/bpf/20240622030437.3973492-2-pulehui@huaweicloud.com
2024-07-01libbpf: Fix error handling in btf__distill_base()Alan Maguire
Coverity points out that after calling btf__new_empty_split() the wrong value is checked for error. Fixes: 58e185a0dc35 ("libbpf: Add btf__distill_base() creating split BTF with distilled base BTF") Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240629100058.2866763-1-alan.maguire@oracle.com
2024-07-01selftests/bpf: Add selftest for bpf_xdp_flow_lookup kfuncLorenzo Bianconi
Introduce e2e selftest for bpf_xdp_flow_lookup kfunc through xdp_flowtable utility. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/b74393fb4539aecbbd5ac7883605f86a95fb0b6b.1719698275.git.lorenzo@kernel.org
2024-07-01netfilter: Add bpf_xdp_flow_lookup kfuncLorenzo Bianconi
Introduce bpf_xdp_flow_lookup kfunc in order to perform the lookup of a given flowtable entry based on a fib tuple of incoming traffic. bpf_xdp_flow_lookup can be used as building block to offload in xdp the processing of sw flowtable when hw flowtable is not available. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Link: https://lore.kernel.org/bpf/55d38a4e5856f6d1509d823ff4e98aaa6d356097.1719698275.git.lorenzo@kernel.org
2024-07-01netfilter: nf_tables: Add flowtable map for xdp offloadFlorian Westphal
This adds a small internal mapping table so that a new bpf (xdp) kfunc can perform lookups in a flowtable. As-is, xdp program has access to the device pointer, but no way to do a lookup in a flowtable -- there is no way to obtain the needed struct without questionable stunts. This allows to obtain an nf_flowtable pointer given a net_device structure. In order to keep backward compatibility, the infrastructure allows the user to add a given device to multiple flowtables, but it will always return the first added mapping performing the lookup since it assumes the right configuration is 1:1 mapping between flowtables and net_devices. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Link: https://lore.kernel.org/bpf/9f20e2c36f494b3bf177328718367f636bb0b2ab.1719698275.git.lorenzo@kernel.org
2024-07-01firmware: cs_dsp: Prevent buffer overrun when processing V2 alg headersRichard Fitzgerald
Check that all fields of a V2 algorithm header fit into the available firmware data buffer. The wmfw V2 format introduced variable-length strings in the algorithm block header. This means the overall header length is variable, and the position of most fields varies depending on the length of the string fields. Each field must be checked to ensure that it does not overflow the firmware data buffer. As this ia bugfix patch, the fixes avoid making any significant change to the existing code. This makes it easier to review and less likely to introduce new bugs. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: f6bc909e7673 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs") Link: https://patch.msgid.link/20240627141432.93056-5-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-01firmware: cs_dsp: Validate payload length before processing blockRichard Fitzgerald
Move the payload length check in cs_dsp_load() and cs_dsp_coeff_load() to be done before the block is processed. The check that the length of a block payload does not exceed the number of remaining bytes in the firwmware file buffer was being done near the end of the loop iteration. However, some code before that check used the length field without validating it. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: f6bc909e7673 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs") Link: https://patch.msgid.link/20240627141432.93056-4-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-01firmware: cs_dsp: Return error if block header overflows fileRichard Fitzgerald
Return an error from cs_dsp_power_up() if a block header is longer than the amount of data left in the file. The previous code in cs_dsp_load() and cs_dsp_load_coeff() would loop while there was enough data left in the file for a valid region. This protected against overrunning the end of the file data, but it didn't abort the file processing with an error. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: f6bc909e7673 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs") Link: https://patch.msgid.link/20240627141432.93056-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-01firmware: cs_dsp: Fix overflow checking of wmfw headerRichard Fitzgerald
Fix the checking that firmware file buffer is large enough for the wmfw header, to prevent overrunning the buffer. The original code tested that the firmware data buffer contained enough bytes for the sums of the size of the structs wmfw_header + wmfw_adsp1_sizes + wmfw_footer But wmfw_adsp1_sizes is only used on ADSP1 firmware. For ADSP2 and Halo Core the equivalent struct is wmfw_adsp2_sizes, which is 4 bytes longer. So the length check didn't guarantee that there are enough bytes in the firmware buffer for a header with wmfw_adsp2_sizes. This patch splits the length check into three separate parts. Each of the wmfw_header, wmfw_adsp?_sizes and wmfw_footer are checked separately before they are used. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: f6bc909e7673 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs") Link: https://patch.msgid.link/20240627141432.93056-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-01syscalls: fix sys_fanotify_mark prototypeArnd Bergmann
My earlier fix missed an incorrect function prototype that shows up on native 32-bit builds: In file included from fs/notify/fanotify/fanotify_user.c:14: include/linux/syscalls.h:248:25: error: conflicting types for 'sys_fanotify_mark'; have 'long int(int, unsigned int, u32, u32, int, const char *)' {aka 'long int(int, unsigned int, unsigned int, unsigned int, int, const char *)'} 1924 | SYSCALL32_DEFINE6(fanotify_mark, | ^~~~~~~~~~~~~~~~~ include/linux/syscalls.h:862:17: note: previous declaration of 'sys_fanotify_mark' with type 'long int(int, unsigned int, u64, int, const char *)' {aka 'long int(int, unsigned int, long long unsigned int, int, const char *)'} On x86 and powerpc, the prototype is also wrong but hidden in an #ifdef, so it never caused problems. Add another alternative declaration that matches the conditional function definition. Fixes: 403f17a33073 ("parisc: use generic sys_fanotify_mark implementation") Cc: stable@vger.kernel.org Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-01net: ethtool: Fix the panic caused by dev being null when dumping coalesceHeng Qi
syzbot reported a general protection fault caused by a null pointer dereference in coalesce_fill_reply(). The issue occurs when req_base->dev is null, leading to an invalid memory access. This panic occurs if dumping coalesce when no device name is specified. Fixes: f750dfe825b9 ("ethtool: provide customized dim profile management") Reported-by: syzbot+e77327e34cdc8c36b7d3@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=e77327e34cdc8c36b7d3 Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-01Merge tag 'v6.10-rockchip-dtsfixes1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Apart from the regular dts fixes for wrong addresses, missing or wrong properties, this reverts the previous move away from cd-gpios to the mmc-controller's internal card-detect. With this change applied, it was reported that boards could not detect card anymore, so this go reverted of course. * tag 'v6.10-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add sound-dai-cells for RK3368 arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi 4B arm64: dts: rockchip: fix PMIC interrupt pin on ROCK Pi E arm64: dts: rockchip: make poweroff(8) work on Radxa ROCK 5A Revert "arm64: dts: rockchip: remove redundant cd-gpios from rk3588 sdmmc nodes" ARM: dts: rockchip: rk3066a: add #sound-dai-cells to hdmi node arm64: dts: rockchip: Fix the value of `dlg,jack-det-rate` mismatch on rk3399-gru arm64: dts: rockchip: set correct pwm0 pinctrl on rk3588-tiger arm64: dts: rockchip: Rename LED related pinctrl nodes on rk3308-rock-pi-s arm64: dts: rockchip: Fix SD NAND and eMMC init on rk3308-rock-pi-s arm64: dts: rockchip: Fix rk3308 codec@ff560000 reset-names arm64: dts: rockchip: Fix the DCDC_REG2 minimum voltage on Quartz64 Model B Link: https://lore.kernel.org/r/10237789.nnTZe4vzsl@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-01KVM: s390: fix LPSWEY handlingChristian Borntraeger
in rare cases, e.g. for injecting a machine check we do intercept all load PSW instructions via ICTL_LPSW. With facility 193 a new variant LPSWEY was added. KVM needs to handle that as well. Fixes: a3efa8429266 ("KVM: s390: gen_facilities: allow facilities 165, 193, 194 and 196") Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Message-ID: <20240628163547.2314-1-borntraeger@linux.ibm.com>
2024-07-01spi: davinci: Unset POWERDOWN bit when releasing resourcesBastien Curutchet
On the OMAPL138, the SPI reference clock is provided by the Power and Sleep Controller (PSC). The PSC's datasheet says that 'some peripherals have special programming requirements and additional recommended steps you must take before you can invoke the PSC module state transition'. I didn't find more details in documentation but it appears that PSC needs the SPI to clear the POWERDOWN bit before disabling the clock. Indeed, when this bit is set, the PSC gets stuck in transitions from enable to disable state. Clear the POWERDOWN bit when releasing driver's resources Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com> Link: https://patch.msgid.link/20240624071745.17409-1-bastien.curutchet@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-01Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue into main Tony nguyen says: ==================== Intel Wired LAN Driver Updates 2024-06-28 (MAINTAINERS, ice) This series contains updates to MAINTAINERS file and ice driver. Jesse replaces himself with Przemek in the maintainers file. Karthik Sundaravel adds support for VF get/set MAC address via devlink. Eric checks for errors from ice_vsi_rebuild() during queue reconfiguration. Paul adjusts FW API version check for E830 devices. Piotr adds differentiation of unload type when shutting down AdminQ. Przemek changes ice_adapter initialization to occur once per physical card. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-01Merge tag 'for-net-2024-06-28' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth into main bluetooth pull request for net: - Ignore too large handle values in BIG - L2CAP: sync sock recv cb and release - hci_bcm4377: Fix msgid release - ISO: Check socket flag instead of hcon - hci_event: Fix setting of unicast qos interval - hci: disallow setting handle bigger than HCI_CONN_HANDLE_MAX - Add quirk to ignore reserved PHY bits in LE Extended Adv Report - hci_core: cancel all works upon hci_unregister_dev - btintel_pcie: Fix REVERSE_INULL issue reported by coverity - qca: Fix BT enable failure again for QCA6390 after warm reboot Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-01drm: panel-orientation-quirks: Add labels for both Valve Steam Deck revisionsMatthew Schwartz
This accounts for the existence of two Steam Deck revisions instead of a single revision Signed-off-by: Matthew Schwartz <mattschwartz@gwu.edu> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240628205822.348402-3-mattschwartz@gwu.edu
2024-07-01drm: panel-orientation-quirks: Add quirk for Valve GalileoJohn Schoenick
Valve's Steam Deck Galileo revision has a 800x1280 OLED panel Cc: stable@vger.kernel.org # 6.1+ Signed-off-by: John Schoenick <johns@valvesoftware.com> Signed-off-by: Matthew Schwartz <mattschwartz@gwu.edu> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240628205822.348402-2-mattschwartz@gwu.edu
2024-07-01Merge branch 'bnxt_en-ptp' into mainDavid S. Miller
Michael Chan says: ==================== bnxt_en: PTP updates for net-next The first 5 patches implement the PTP feature on the new BCM5760X chips. The main new hardware feature is the new TX timestamp completion which enables the driver to retrieve the TX timestamp in NAPI without deferring to the PTP worker. The last 5 patches increase the number of TX PTP packets in-flight from 1 to 4 on the older BCM5750X chips. On these older chips, we need to call firmware in the PTP worker to retrieve the timestamp. We use an arry to keep track of the in-flight TX PTP packets. v2: Patch #2: Fix the unwind of txr->is_ts_pkt when bnxt_start_xmit() aborts. Patch #4: Set the SKBTX_IN_PROGRESS flag for timestamp packets. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-01bnxt_en: Remove atomic operations on ptp->tx_availPavan Chebbi
Now that we require the spinlock to protect ptp->txts_prod, change ptp->tx_avail to non-atomic and protect it under the same spinlock. Add a new helper function bnxt_ptp_get_txts_prod() to decrement ptp->tx_avail under spinlock and return the producer. Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-01bnxt_en: Increase the max total outstanding PTP TX packets to 4Pavan Chebbi
Start accepting up to 4 TX TS requests on BCM5750X (P5) chips. These PTP TX packets will be queued in the ptp->txts_req[] array waiting for the TX timestamp to complete. The entries in the array will be managed by a producer and consumer index. The producer index is updated under spinlock since multiple TX rings can try to send PTP packets at the same time. Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-01bnxt_en: Let bnxt_stamp_tx_skb() return error codePavan Chebbi
Change the function bnxt_stamp_tx_skb() to return 0 for suceess or -EAGAIN if the timestamp is still pending in firmware. The calling PTP aux worker will reschedule based on the return code. Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-01bnxt_en: Remove an impossible condition check for PTP TX pending SKBPavan Chebbi
In the current 5750X PTP code paths, there is always at most one TX SKB requested for timestamp and we won't accept another one until we have retrieved the timestamp or it has timed out. Remove the unnecessary check in bnxt_get_tx_ts_p5() for a pending SKB and change the function to void. Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-01bnxt_en: Refactor all PTP TX timestamp fields into a structPavan Chebbi
On the older 5750X (P5) chips, we currently support only 1 TX PTP packet in-flight waiting for the timestamp. Refactor the datastructures to prepare to support up to 4 TX PTP packets. Combine all fields required for PTP TX timestamp query into one structure. An array of this structure will be added in follow-on patches to support multiple outstanding TX timestamps. Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-01bnxt_en: Add BCM5760X specific PHC registers mappingPavan Chebbi
BCM5760X firmware will advertise direct 64-bit PHC registers access for the driver from BAR0. Make the necessary changes in handling HWRM_PORT_MAC_PTP_QCFG's response and PHC register mapping for 5760X chips. Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-01bnxt_en: Add TX timestamp completion logicMichael Chan
The new BCM5760X chips will return the timestamp of TX packets in a new completion. Add logic in __bnxt_poll_work() to handle this completion type to retrieve the timestamp. This feature eliminates the limit on the number of in-flight PTP TX packets. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-01bnxt_en: Allow some TX packets to be unprocessed in NAPIMichael Chan
The driver's current logic will always free all the TX SKBs up to txr->tx_hw_cons within NAPI. In the next patches, we'll be adding logic to handle TX timestamp completion and we may need to hold some remaining TX SKBs if we don't have the timestamp completions yet. Modify __bnxt_poll_work_done() to clear each event bit separately to allow bnapi->tx_int() to decide whether to clear BNXT_TX_CMP_EVENT or not. bnapi->tx_int() will not clear BNXT_TX_CMP_EVENT if some TX SKBs are held waiting for TX timestamps. Note that legacy chips will never hold any SKBs this way. The SKB is always deferred to the PTP worker slow path to retrieve the timestamp from firmware. On the new P7 chips, the timestamp is returned by the hardware directly and we can retrieve it directly from NAPI. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-01bnxt_en: Add is_ts_pkt field to struct bnxt_sw_tx_bdMichael Chan
Remove the unused is_gso field and add the is_ts_pkt field to struct bnxt_sw_tx_bd. This field will mark the TX BD that has requested HW TX timestamp. The field needs to be cleared if the timestamp packet is later aborted. This field will be useful when processing the new TX timestamp completion from the hardware in the next patches. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-01bnxt_en: Add new TX timestamp completion definitionsMichael Chan
The new BCM5760X chips will generate this new TX timestamp completion when a TX packet's timestamp has been taken right before transmission. The driver logic to retrieve the timestamp will be added in the next few patches. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-01octeontx2-af: Sync NIX and NPA contexts from NDC to LLC/DRAMNithin Dabilpuram
Octeontx2 hardware uses Near Data Cache(NDC) block to cache contexts in it so that access to LLC/DRAM can be avoided. It is recommended in HRM to sync the NDC contents before releasing/resetting LF resources. Hence implement NDC_SYNC mailbox and sync contexts during driver teardown. Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-01net: tn40xx: add initial ethtool_ops supportFUJITA Tomonori
Call phylink_ethtool_ksettings_get() for get_link_ksettings method and ethtool_op_get_link() for get_link method. Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-01Merge tag 'nf-next-24-06-28' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next into main Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for net-next: Patch #1 to #11 to shrink memory consumption for transaction objects: struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */ struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */ struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */ struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */ struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */ struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */ struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */ struct nft_trans_elem can now be allocated from kmalloc-96 instead of kmalloc-128 slab. Series from Florian Westphal. For the record, I have mangled patch #1 to add nft_trans_container_*() and use if for every transaction object. I have also added BUILD_BUG_ON to ensure struct nft_trans always comes at the beginning of the container transaction object. And few minor cleanups, any new bugs are of my own. Patch #12 simplify check for SCTP GSO in IPVS, from Ismael Luceno. Patch #13 nf_conncount key length remains in the u32 bound, from Yunjian Wang. Patch #14 removes unnecessary check for CTA_TIMEOUT_L3PROTO when setting default conntrack timeouts via nfnetlink_cttimeout API, from Lin Ma. Patch #15 updates NFT_SECMARK_CTX_MAXLEN to 4096, SELinux could use larger secctx names than the existing 256 bytes length. Patch #16 adds a selftest to exercise nfnetlink_queue listeners leaving nfnetlink_queue, from Florian Westphal. Patch #17 increases hitcount from 255 to 65535 in xt_recent, from Phil Sutter. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 03:00:06 +0000