summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-10mtd: physmap_of: fixup gemini/versatile dependenciesBrian Norris
physmap_of sort of depends on the gemini and versatile modules (when they're enabled), but this isn't expressed in Kconfig. Let's just merge the modules all together, when enabled. Then we can avoid exporting a few symbols, and the versatile and gemini code can now be modular again (the below commit accidentally made them built-in only). Resolves errors like this: ERROR: "of_flash_probe_versatile" [drivers/mtd/maps/physmap_of.ko] undefined! ERROR: "of_flash_probe_gemini" [drivers/mtd/maps/physmap_of.ko] undefined! Fixes: 56ff337ea433 ("mtd: physmap_of: add a hook for Gemini flash probing") Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-10Merge branch 'mlxsw-offload-mc-flood'David S. Miller
Jiri Pirko says: ==================== mlxsw: Offload MC flood for unregister MC Nogah says: When multicast is enabled, the Linux bridge floods unregistered multicast packets only to ports connected to a multicast router. Devices capable of offloading the Linux bridge need to be made aware of such ports, for proper flooding behavior. On the other hand, when multicast is disabled, such packets should be flooded to all ports. This patchset aims to fix that, by offloading the multicast state and the list of multicast router ports. The first 3 patches adds switchdev attributes to offload this data. The rest of the patchset add implementation for handling this data in the mlxsw driver. The effects this data has on the MDB (namely, when the multicast is disabled the MDB should be considered as invalid, and when it is enabled, a packet that is flooded by it should also be flooded to the multicast routers ports) is subject of future work. Testing of this patchset included: Sending 3 mc packets streams, LL, register and unregistered, and checking that they reached only to the ports that should have received them. The configs were: mc disabled, mc without mc router ports and mc with fixed router port. It was checked for vlan aware bridge, vlan unaware bridge and vlan unaware bridge with another vlan unaware bridge on the same machine ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10mlxsw: spectrum: Update mc_disabled flag by switchdev attrNogah Frankel
Add a function to update mc_disabled from switchdev attr SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10mlxsw: spectrum: Extend port_orig_get for bridge devicesNogah Frankel
The function mlxsw_sp_port_orig_get returns the vport from the physical port if needed, based on the original device. This patch addresses the case where the original device is a bridge. If it is vlan unaware bridge, it returns the matching vport. If it is vlan aware bridge, there is no matching vport, and it returns the original port. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10mlxsw: spectrum: Add an option to flood mc by mc_router_portNogah Frankel
The decision whether to flood a multicast packet to a port dependent on three flags: mc_disabled, mc_router_port, mc_flood. If mc_disabled is on, the port will be flooded according to mc_flood, otherwise, according to mc_router_port. To accomplish that, add those flags into the mlxsw_sp_port struct and update the mc flood table accordingly. Update mc_router_port by switchdev attribute SWITCHDEV_ATTR_ID_PORT_MC_ROUTER_PORT. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10mlxsw: spectrum: Separate bc and mc floodsNogah Frankel
Break the bm (broadcast-multicast) into two tables, one for broadcast (and link local multicast that behaves like bc) and one for unknown multicasts. Add a bool into mlxsw_sp_port named mc_flood that reflect the value this port should have in the mc flood table (currently, always 1); Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10mlxsw: spectrum: Change max vfidNogah Frankel
A user that wants many bridges will use 1.Q bridge which are scalable. One can have as many 1.Q bridges as vfids. This patch sets their number to 1k, which is a reasonably large number. This change is done here because the next patches will add a new flood table, and without it, it will increase the overall size of the flood tables dramatically. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10mlxsw: spectrum: Make port flood update more genericNogah Frankel
Currently, there is a per port flood update function only for the UC table. Make the function more generic by changing the table type to be an input. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10mlxsw: spectrum: Break flood set func to be per tableNogah Frankel
Currently, the flood set function can't operate on only one table, but sets both uc_flood and mb_flood together. This patch creates a function that sets the flood state per table. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10switchdev: bridge: Offload mc router portsNogah Frankel
Offload the mc router ports list, whenever it is being changed. It is done because in some cases mc packets needs to be flooded to all the ports in this list. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10bridge: mcast: Merge the mc router ports deletions to one functionNogah Frankel
There are three places where a port gets deleted from the mc router port list. This patch join the actual deletion to one function. It will be helpful for later patch that will offload changes in the mc router ports list. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10switchdev: bridge: Offload multicast disabledNogah Frankel
Offload multicast disabled flag, for more accurate mc flood behavior: When it is on, the mdb should be ignored. When it is off, unregistered mc packets should be flooded to mc router ports. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10Merge branch 'sched-cls_api-small-cleanup'David S. Miller
Jiri Pirko says: ==================== sched: cls_api: small cleanup This patchset makes couple of things in cls_api code a bit nicer and easier for reader to digest. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10sched: check negative err value to safe one level of indentJiri Pirko
As it is more common, check err for !0. That allows to safe one level of indentation and makes the code easier to read. Also, make 'next' variable global in function as it is used twice. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10sched: add missing curly braces in else branch in tc_ctl_tfilterJiri Pirko
Curly braces need to be there, for stylistic reasons. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10sched: move err set right before goto errout in tc_ctl_tfilterJiri Pirko
This makes the reader to know right away what is the error value. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10sched: push TC filter protocol creation into a separate functionJiri Pirko
Make the long function tc_ctl_tfilter a little bit shorter and easier to read. Also make the creation of filter proto symmetric to destruction. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10sched: move tcf_proto_destroy and tcf_destroy_chain helpers into cls_apiJiri Pirko
Creation is done in this file, move destruction to be at the same place. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10sched: rename tcf_destroy to tcf_destroy_protoJiri Pirko
This function destroys TC filter protocol, not TC filter. So name it accordingly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10afs: Use core kernel UUID generationArnd Bergmann
AFS uses a time based UUID to identify the host itself. This requires getting a timestamp which is currently done through the getnstimeofday() interface that we want to eventually get rid of. Instead of replacing it with a ktime-based interface, simply remove the entire function and use generate_random_uuid() instead, which has a v4 ("completely random") UUID instead of the time-based one. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com>
2017-02-10afs: Move UUID struct to linux/uuid.hDavid Howells
Move the afs_uuid struct to linux/uuid.h, rename it to uuid_v1 and change the u16/u32 fields to __be16/__be32 instead so that the structure can be cast to a 16-octet network-order buffer. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de
2017-02-10Merge branch 'mlxsw-identical-routes-handling'David S. Miller
Jiri Pirko says: ==================== mlxsw: Identical routes handling Ido says: The kernel can store several FIB aliases that share the same prefix and length. These aliases can differ in other parameters such as TOS and metric, which are taken into account during lookup. Offloading devices might not have the same flexibility, allowing only a single route with the same prefix and length to be reflected. mlxsw is one such device. This patchset aims to correctly handle this situation in the mlxsw driver. The first four patches introduce small changes in the IPv4 FIB code, so that listeners of the FIB notification chain will be able to correctly handle identical routes. The last three patches build on top of previous work and introduce the necessary changes in the mlxsw driver. The biggest change is the introduction of a FIB node, where identical routes are chained, instead of a primitive reference counting. This is explained in detail in the fifth patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10mlxsw: spectrum_router: Add support for route replaceIdo Schimmel
Upon the reception of an ENTRY_REPLACE notification, resolve the FIB node corresponding to the prefix and length and insert the new route before the first matching entry. Since the notification also signals the deletion of the replaced route, delete it from the driver's cache. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10mlxsw: spectrum_router: Add support for route appendIdo Schimmel
When a new route is appended, it's placed after existing routes sharing the same parameters (prefix, length, table ID, TOS and priority). While the device supports only one route with the same prefix and length in a single table, it's important to correctly place the appended route in the driver's cache, as when a route is deleted the next one is programmed into the device. Following the reception of an ENTRY_APPEND notification, resolve the FIB node corresponding to the prefix and length and correctly place the new entry in its entry list. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10mlxsw: spectrum_router: Correctly handle identical routesIdo Schimmel
In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10ipv4: fib: Add events for FIB replace and appendIdo Schimmel
The FIB notification chain currently uses the NLM_F_{REPLACE,APPEND} flags to signal routes being replaced or appended. Instead of using netlink flags for in-kernel notifications we can simply introduce two new events in the FIB notification chain. This has the added advantage of making the API cleaner, thereby making it clear that these events should be supported by listeners of the notification chain. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> CC: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10ipv4: fib: Send notification before deleting FIB aliasIdo Schimmel
When a FIB alias is replaced following NLM_F_REPLACE, the ENTRY_ADD notification is sent after the reference on the previous FIB info was dropped. This is problematic as potential listeners might need to access it in their notification blocks. Solve this by sending the notification prior to the deletion of the replaced FIB alias. This is consistent with ENTRY_DEL notifications. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> CC: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10ipv4: fib: Send deletion notification with actual FIB alias typeIdo Schimmel
When a FIB alias is removed, a notification is sent using the type passed from user space - can be RTN_UNSPEC - instead of the actual type of the removed alias. This is problematic for listeners of the FIB notification chain, as several FIB aliases can exist with matching parameters, but the type. Solve this by passing the actual type of the removed FIB alias. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> CC: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10ipv4: fib: Only flush FIB aliases belonging to currently flushed tableIdo Schimmel
In case the MAIN table is flushed and its trie is shared with the LOCAL table, then we might be flushing FIB aliases belonging to the latter. This can lead to FIB_ENTRY_DEL notifications sent with the wrong table ID. The above doesn't affect current listeners, as the table ID is ignored during entry deletion, but this will change later in the patchset. When flushing a particular table, skip any aliases belonging to a different one. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Patrick McHardy <kaber@trash.net> Reviewed-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10blk-mq: pass bio to blk_mq_sched_get_rq_privPaolo Valente
bio is used in bfq-mq's get_rq_priv, to get the request group. We could pass directly the group here, but I thought that passing the bio was more general, giving the possibility to get other pieces of information if needed. Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-10Merge branches 'iommu/fixes', 'arm/exynos', 'arm/renesas', 'arm/smmu', ↵Joerg Roedel
'arm/mediatek', 'arm/core', 'x86/vt-d' and 'core' into next
2017-02-10vfio/type1: Fix error return code in vfio_iommu_type1_attach_group()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 5d704992189f ("vfio/type1: Allow transparent MSI IOVA allocation") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-10iommu: Remove iommu_register_instance interfaceJoerg Roedel
And also move its remaining functionality to iommu_device_register() and 'struct iommu_device'. Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-10iommu/exynos: Make use of iommu_device_register interfaceJoerg Roedel
Register Exynos IOMMUs to the IOMMU core and make them visible in sysfs. This patch does not add the links between IOMMUs and translated devices yet. Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-10Merge tag 'irqchip-fixes-4.10' of ↵Thomas Gleixner
git://git.infradead.org/users/jcooper/linux into irq/urgent Pull irqchip fixes for v4.10 from Jason Cooper - keystone: Fix scheduling while atomic for realtime - mxs: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
2017-02-10irqdesc: Add a resource managed version of irq_alloc_descs()Bartosz Golaszewski
Add a devres flavor of __devm_irq_alloc_descs() and corresponding helper macros. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-doc@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Link: http://lkml.kernel.org/r/1486729403-21132-1-git-send-email-bgolaszewski@baylibre.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-10mtd: spi-nor: cqspi: remove redundant dead code on error return checkColin Ian King
Checking for ret < 0 is redundant because a previous check on ret being non-zero already handles the ret < 0 case. Remove the redundant code. Found by CoverityScan, CID#1398863, CID#1398864 Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Richard Weinberger <richard@nod.at> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10Documentation: mtk-quadspi: update DT bindingsGuochun Mao
Add "mediatek,mt2701-nor" for nor flash node's compatible. Signed-off-by: Guochun Mao <guochun.mao@mediatek.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READYunhui Cui
There are some read modes for flash, such as NORMAL, FAST, QUAD, DDR QUAD. These modes will use the identical lut table base So rename SEQID_QUAD_READ to SEQID_READ. Signed-off-by: Yunhui Cui <B56489@freescale.com> Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com> Acked-by: Han xu <han.xu@nxp.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd:fsl-quadspi:use the property fields of SPI-NORYunhui Cui
We can get the read/write/erase opcode from the spi nor framework directly. This patch uses the information stored in the SPI-NOR to remove the hardcode in the fsl_qspi_init_lut(). Signed-off-by: Yunhui Cui <B56489@freescale.com> Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com> Acked-by: Han xu <han.xu@nxp.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd: spi-nor: Add support for gd25q16Kamal Dasu
Add GigaDevice GD25Q16 (16M-bit) to supported list. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd: spi-nor: Fix S3AN addressing calculationRicardo Ribalda
The page calculation under spi_nor_s3an_addr_convert() was wrong. On Default Address Mode we need to perform a divide by page_size. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd: aspeed: fix compile warning in aspeed_smc_read_from_ahb()Cédric Le Goater
The first argument of ioread32_rep() and ioread8_rep is not const. Change aspeed_smc_read_from_ahb() prototype to fix compile warning : drivers/mtd/spi-nor/aspeed-smc.c: In function 'aspeed_smc_read_from_ahb': drivers/mtd/spi-nor/aspeed-smc.c:212:16: warning: passing argument 1 of 'ioread32_rep' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ioread32_rep(src, buf, len >> 2); Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd: spi-nor: add dt support for Everspin MRAMsUwe Kleine-König
The MR25 family doesn't support JEDEC, so they need explicit mentioning in the list of supported spi IDs. This makes it possible to add these using for example: compatible = "everspin,mr25h40"; There was already an entry for mr25h256. Move that one out of the "keep for compatibility" section and put in a new group for Everspin MRAMs. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10Merge tag 'ib-mfd-mtd-v4.11' of ↵Cyrille Pitchen
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd From Lee Jones: """ Immutable branch between MFD and MTD due for the v4.11 merge window """
2017-02-10mtd: spi-nor: Add lock/unlock support for f25l32paVictor Shyba
This chip has write protection enabled on power-up, so this flag is necessary to support write operations. Signed-off-by: Victor Shyba <victor1984@riseup.net> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd: spi-nor: add a stateless method to support memory size above 128MibCyrille Pitchen
This patch provides an alternative mean to support memory above 16MiB (128Mib) by replacing 3byte address op codes by their associated 4byte address versions. Using the dedicated 4byte address op codes doesn't change the internal state of the SPI NOR memory as opposed to using other means such as updating a Base Address Register (BAR) and sending command to enter/leave the 4byte mode. Hence when a CPU reset occurs, early bootloaders don't need to be aware of BAR value or 4byte mode being enabled: they can still access the first 16MiB of the SPI NOR memory using the regular 3byte address op codes. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Tested-by: Vignesh R <vigneshr@ti.com> Acked-by: Marek Vasut <marek.vasut@gmail.com>
2017-02-10mtd: spi-nor: rename SPINOR_OP_* macros of the 4-byte address op codesCyrille Pitchen
This patch renames the SPINOR_OP_* macros of the 4-byte address instruction set so the new names all share a common pattern: the 4-byte address name is built from the 3-byte address name appending the "_4B" suffix. The patch also introduces new op codes to support other SPI protocols such as SPI 1-4-4 and SPI 1-2-2. This is a transitional patch and will help a later patch of spi-nor.c to automate the translation from the 3-byte address op codes into their 4-byte address version. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Marek Vasut <marek.vasut@gmail.com>
2017-02-10mtd: m25p80: consider max message size in m25p80_readHeiner Kallweit
Consider a message size limit when calculating the maximum amount of data that can be read. The message size limit has been introduced with 4.9, so cc it to stable. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
2017-02-10mtd: spi-nor: bindings for the Aspeed memory controllersCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
generated by cgit (git 2.34.1) at 2025-09-19 00:28:01 +0000