summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-28serial: 8250: Use hrtimers for rs485 delaysRafael Gago
Previously the timers where based on the classic timers, giving a too coarse resolution on systems with configs of less than 1000 HZ. This patch changes the rs485 timers to hrtimers. Signed-off-by: Rafael Gago Castano <rgc@hms.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28serial: core: Consider rs485 settings to drive RTSRafael Gago
Previously the rs485 settings weren't considered when setting the RTS line, so e.g. closing and reopening a port made serial_core to drive the line as if rs485 was disabled. This patch fixes those issues. Signed-off-by: Rafael Gago Castano <rgc@hms.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28tty: serial: 8250_mtk: Use PTR_ERR_OR_ZEROHimanshu Jha
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28dt-bindings: serial: sh-sci: Add support for r8a77995 (H)SCIFGeert Uytterhoeven
Document support for the (H)SCIF serial ports in the Renesas R-Car D3 (r8a77995) SoC. No driver update is needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28serial: sh-sci: use of_property_read_bool()Sergei Shtylyov
Use more compact of_property_read_bool() call for a boolean property instead of of_find_property() call in sci_parse_dt(). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28serial: Fix port type numbering for TI DA8xxAndy Shevchenko
The UAPI has a global list of unique numbers for different port types. The commit a2d6a987bfe4 ("serial: 8250: Add new port type for TI DA8xx/66AK2x") introduced a new port type and brought the collision with two other port types. Reuse 95 for it instead. Fixes: a2d6a987bfe4 ("serial: 8250: Add new port type for TI DA8xx/66AK2x") Cc: David Lechner <david@lechnology.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28serial: Remove unused port typeAndy Shevchenko
PORT_MFD is not in use since commit 1bd187de5364 ("x86, intel-mid: remove Intel MID specific serial support") Remove leftover. Fixes: 1bd187de5364 ("x86, intel-mid: remove Intel MID specific serial support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28serial: pch_uart: Make port type explicitAndy Shevchenko
It used to be a gap in port definitions after PORT_MAX_8250. Since the new drivers are coming the gap become shorter and shorter until the commit a2d6a987bfe4 ("serial: 8250: Add new port type for TI DA8xx/66AK2x") completely removed it. So, while type here is just a formality, make things a little bit more explicit for this driver and move port types to UAPI header. Note, it uses two types for now. Fixes: fddceb8b5399 ("tty: 8250: Add 64byte UART support for FSL platforms") Cc: Priyanka Jain <Priyanka.Jain@freescale.com> Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28serial: core: remove unneeded irq_wake flagAndy Shevchenko
There is no need to duplicate a flag which IRQ core takes care of. Replace custom flag by IRQ core API that retrieves its state. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28serial: stm32-usart: Avoid using irq_wake flagAndy Shevchenko
There is no need to duplicate a flag which IRQ core takes care of. Replace custom flag by IRQ core API that retrieves its state. Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28serial: st-asc: Avoid using irq_wake flagAndy Shevchenko
There is no need to duplicate a flag which IRQ core takes care of. Replace custom flag by IRQ core API that retrieves its state. Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28serial: fsl_lpuart: Avoid using irq_wake flagAndy Shevchenko
There is no need to duplicate a flag which IRQ core takes care of. Replace custom flag by IRQ core API that retrieves its state. Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Cc: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28tty: serial: msm: Move request_irq to the end of startupNeeraj Upadhyay
Move the request_irq() call to the end of the msm_startup(), so that we don't handle interrupts while msm_startup() is running. This avoids potential races while initialization is in progress. For example, consider below scenario where rx handler reads the intermediate value of dma->chan, set in msm_request_rx_dma(), and tries to do dma mapping, which results in data abort. uart_port_startup() msm_startup() request_irq() ... msm_request_rx_dma() ... dma->chan = dma_request_slave_channel_reason(dev, "rx"); <UART RX IRQ> msm_uart_irq() msm_handle_rx_dm() msm_start_rx_dma() dma->desc = dma_map_single() <data abort> Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org> Reviewd-by: Andy Gross <andy.gross@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28serial: pch_uart: Remove unneeded NULL checkFabio Estevam
There is no need to do a NULL check for debugfs_remove(). Quoting Documentation/filesystems/debugfs.txt: "The dentry value can be NULL, in which case nothing will be removed." , so remove the unneeded NULL check. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28tty: serial: sprd: fix error return code in sprd_probe()Gustavo A. R. Silva
platform_get_irq() returns an error code, but the sprd_serial driver ignores it and always returns -ENODEV. This is not correct and, prevents -EPROBE_DEFER from being propagated properly. Also, notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print and propagate the return value of platform_get_irq on failure. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28serial: meson: constify uart_ops structuresJulia Lawall
These uart_ops structures are only stored in the ops field of a uart_port structure and this fields is const, so the uart_ops structures can also be const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28serial: owl: constify uart_ops structuresJulia Lawall
These uart_ops structures are only stored in the ops field of a uart_port structure and this fields is const, so the uart_ops structures can also be const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28serial: stm32: fix pio transmit timeoutGerald Baeza
100µs was too short for low speed transmission (9600bps) Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Bich Hemon <bich.hemon@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28serial: pl011: constify amba_idArvind Yadav
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28serial: pl010: constify amba_idArvind Yadav
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28tty: amba-pl011: constify vendor_data structuresJulia Lawall
These vendor_data structures are only stored in the vendor field of the uart_amba_port structure, as defined in the same file, and this field is declared as const. Thus the vendor_data structures can be const too. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-14Merge 4.13-rc5 into tty-nextGreg Kroah-Hartman
We want the fixes in here, and we resolve the merge issue in the 8250_core.c file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-13Linux 4.13-rc5v4.13-rc5Linus Torvalds
2017-08-13Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes: - compressed boot: Ignore a generated .c file - VDSO: Fix a register clobber list - DECstation: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression - Octeon: Fix recent cleanups that cleaned away a bit too much thus breaking the arch side of the EDAC and USB drivers. - uasm: Fix duplicate const in "const struct foo const bar[]" which GCC 7.1 no longer accepts. - Fix race on setting and getting cpu_online_mask - Fix preemption issue. To do so cleanly introduce macro to get the size of L3 cache line. - Revert include cleanup that sometimes results in build error - MicroMIPS uses bit 0 of the PC to indicate microMIPS mode. Make sure this bit is set for kernel entry as well. - Prevent configuring the kernel for both microMIPS and MT. There are no such CPUs currently and thus the combination is unsupported and results in build errors. This has been sitting in linux-next for a few days and has survived automated testing by Imagination's test farm. No known regressions pending except a number of issues that crept up due to lots of people switching to GCC 7.1" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Set ISA bit in entry-y for microMIPS kernels MIPS: Prevent building MT support for microMIPS kernels MIPS: PCI: Fix smp_processor_id() in preemptible MIPS: Introduce cpu_tcache_line_size MIPS: DEC: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression MIPS: VDSO: Fix clobber lists in fallback code paths Revert "MIPS: Don't unnecessarily include kmalloc.h into <asm/cache.h>." MIPS: OCTEON: Fix USB platform code breakage. MIPS: Octeon: Fix broken EDAC driver. MIPS: gitignore: ignore generated .c files MIPS: Fix race on setting and getting cpu_online_mask MIPS: mm: remove duplicate "const" qualifier on insn_table
2017-08-13Merge tag 'driver-core-4.13-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are three firmware core fixes for 4.13-rc5. All three of these fix reported issues and have been floating around for a few weeks. They have been in linux-next with no reported problems" * tag 'driver-core-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware: avoid invalid fallback aborts by using killable wait firmware: fix batched requests - send wake up on failure on direct lookups firmware: fix batched requests - wake all waiters
2017-08-13Merge tag 'char-misc-4.13-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are two patches for 4.13-rc5. One is a fix for a reported thunderbolt issue, and the other a fix for an MEI driver issue. Both have been in linux-next with no reported issues" * tag 'char-misc-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: thunderbolt: Do not enumerate more ports from DROM than the controller has mei: exclude device from suspend direct complete optimization
2017-08-13Merge tag 'tty-4.13-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are two tty serial driver fixes for 4.13-rc5. One is a revert of a -rc1 patch that turned out to not be a good idea, and the other is a fix for the pl011 serial driver. Both have been in linux-next with no reported issues" * tag 'tty-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: Delete dead code for CIR serial ports" tty: pl011: fix initialization order of QDF2400 E44
2017-08-13Merge tag 'staging-4.13-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/iio fixes from Greg KH: "Here are some Staging and IIO driver fixes for 4.13-rc5. Nothing major, just a number of small fixes for reported issues. All of these have been in linux-next for a while now with no reported issues. Full details are in the shortlog" * tag 'staging-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: comedi_fops: do not call blocking ops when !TASK_RUNNING iio: aspeed-adc: wait for initial sequence. iio: accel: bmc150: Always restore device to normal mode after suspend-resume staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read iio: adc: axp288: Fix the GPADC pin reading often wrongly returning 0 iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits iio: accel: st_accel: add SPI-3wire support iio: adc: Revert "axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications" iio: adc: sun4i-gpadc-iio: fix unbalanced irq enable/disable iio: pressure: st_pressure_core: disable multiread by default for LPS22HB iio: light: tsl2563: use correct event code
2017-08-13Merge tag 'usb-4.13-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes and new device ids for 4.13-rc5. There is the usual gadget driver fixes, some new quirks for "messy" hardware, and some new device ids. All have been in linux-next with no reported issues" * tag 'usb-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: pl2303: add new ATEN device id usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter USB: Check for dropped connection before switching to full speed usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume usb: renesas_usbhs: gadget: fix unused-but-set-variable warning usb: renesas_usbhs: Fix UGCTRL2 value for R-Car Gen3 usb: phy: phy-msm-usb: Fix usage of devm_regulator_bulk_get() usb: gadget: udc: renesas_usb3: Fix usb_gadget_giveback_request() calling usb: dwc3: gadget: Correct ISOC DATA PIDs for short packets USB: serial: option: add D-Link DWM-222 device ID usb: musb: fix tx fifo flush handling again usb: core: unlink urbs from the tail of the endpoint's urb_list usb-storage: fix deadlock involving host lock and scsi_done uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069 USB: hcd: Mark secondary HCD as dead if the primary one died USB: serial: cp210x: add support for Qivicon USB ZigBee dongle
2017-08-12Merge tag 'for-linus-20170812' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull another MTD fix from Brian Norris: "An mtdblock regression occurred in -rc1 (all writes were broken!), in the process of some block subsystem refactoring. Noticed and fixed last week, but I'm a little slow on the uptake" * tag 'for-linus-20170812' of git://git.infradead.org/linux-mtd: mtd: blkdevs: Fix mtd block write failure
2017-08-12mtd: blkdevs: Fix mtd block write failureAbhishek Sahu
All the MTD block write requests are failing with following error messages mkfs.ext4 /dev/mtdblock0 print_req_error: I/O error, dev mtdblock0, sector 0 Buffer I/O error on dev mtdblock0, logical block 0, lost async page write The control is going to default case after block write request because of missing return. Fixes: commit 2a842acab109 ("block: introduce new block status code type") Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-08-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "The highlights include: - Fix iscsi-target payload memory leak during ISCSI_FLAG_TEXT_CONTINUE (Varun Prakash) - Fix tcm_qla2xxx incorrect use of tcm_qla2xxx_free_cmd during ABORT (Pascal de Bruijn + Himanshu Madhani + nab) - Fix iscsi-target long-standing issue with parallel delete of a single network portal across multiple target instances (Gary Guo + nab) - Fix target dynamic se_node GPF during uncached shutdown regression (Justin Maggard + nab)" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Fix node_acl demo-mode + uncached dynamic shutdown regression iscsi-target: Fix iscsi_np reset hung task during parallel delete qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT (v2) cxgbit: fix sg_nents calculation iscsi-target: fix invalid flags in text response iscsi-target: fix memory leak in iscsit_setup_text_cmd() cxgbit: add missing __kfree_skb() tcmu: free old string on reconfig tcmu: Fix possible to/from address overflow when doing the memcpy
2017-08-12Merge tag 'for-linus-4.13b-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Some fixes for Xen: - a fix for a regression introduced in 4.13 for a Xen HVM-guest configured with KASLR - a fix for a possible deadlock in the xenbus driver when booting the system - a fix for lost interrupts in Xen guests" * tag 'for-linus-4.13b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: Fix interrupt lost during irq_disable and irq_enable xen: avoid deadlock in xenbus xen: fix hvm guest with kaslr enabled xen: split up xen_hvm_init_shared_info() x86: provide an init_mem_mapping hypervisor hook
2017-08-11Merge tag 'nfs-for-4.13-5' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds
Pull NFS client fixes from Anna Schumaker: "A few more NFS client bugfixes from me for rc5. Dros has a stable fix for flexfiles to prevent leaking the nfs4_ff_ds_version arrays when freeing a layout, Trond fixed a potential recovery loop situation with the TEST_STATEID operation, and Christoph fixed up the pNFS blocklayout Kconfig options to prevent unsafe use with kernels that don't have large block device support. Summary: Stable fix: - fix leaking nfs4_ff_ds_version array Other fixes: - improve TEST_STATEID OLD_STATEID handling to prevent recovery loop - require 64-bit sector_t for pNFS blocklayout to prevent 32-bit compile errors" * tag 'nfs-for-4.13-5' of git://git.linux-nfs.org/projects/anna/linux-nfs: pnfs/blocklayout: require 64-bit sector_t NFSv4: Ignore NFS4ERR_OLD_STATEID in nfs41_check_open_stateid() nfs/flexfiles: fix leak of nfs4_ff_ds_version arrays
2017-08-11Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A set of fixes that should go into this series. This contains: - Fix from Bart for blk-mq requeue queue running, preventing a continued loop of run/restart. - Fix for a bio/blk-integrity issue, in two parts. One from Christoph, fixing where verification happens, and one from Milan, for a NULL profile. - NVMe pull request, most of the changes being for nvme-fc, but also a few trivial core/pci fixes" * 'for-linus' of git://git.kernel.dk/linux-block: nvme: fix directive command numd calculation nvme: fix nvme reset command timeout handling nvme-pci: fix CMB sysfs file removal in reset path lpfc: support nvmet_fc defer_rcv callback nvmet_fc: add defer_req callback for deferment of cmd buffer return nvme: strip trailing 0-bytes in wwid_show block: Make blk_mq_delay_kick_requeue_list() rerun the queue at a quiet time bio-integrity: only verify integrity on the lowest stacked driver bio-integrity: Fix regression if profile verify_fn is NULL
2017-08-11Merge tag 'mmc-v4.13-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - fix lockdep splat when removing mmc_block module - fix the logic for setting eMMC HS400ES signal voltage MMC host: - omap_hsmmc: add CMD23 capability to fix -EIO errors" * tag 'mmc-v4.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: block: fix lockdep splat when removing mmc_block module mmc: mmc: correct the logic for setting HS400ES signal voltage mmc: host: omap_hsmmc: Add CMD23 capability to omap_hsmmc driver
2017-08-11Merge tag 'fbdev-v4.13-rc5' of git://github.com/bzolnier/linuxLinus Torvalds
Pull fbdev fixes from Bartlomiej Zolnierkiewicz: - allow user to disable write combined mapping in efifb driver (Dave Airlie) - fix use after free bugs on driver removal in imxfb driver (Dan Carpenter) - fix unused variable warning in omapfb driver (Arnd Bergmann) * tag 'fbdev-v4.13-rc5' of git://github.com/bzolnier/linux: efifb: allow user to disable write combined mapping. fbdev: omapfb: remove unused variable video: fbdev: imxfb: use after free in imxfb_remove()
2017-08-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: "Fix a few bugs in fuse" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: set mapping error in writepage_locked when it fails fuse: Dont call set_page_dirty_lock() for ITER_BVEC pages for async_dio fuse: initialize the flock flag in fuse_file on allocation
2017-08-11Merge tag 'iommu-fixes-v4.13-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fix from Joerg Roedel: "Fix a NULL-pointer dereference in arm_smmu_add_device" * tag 'iommu-fixes-v4.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: fix null-pointer dereference in arm_smmu_add_device
2017-08-11pnfs/blocklayout: require 64-bit sector_tChristoph Hellwig
The blocklayout code does not compile cleanly for a 32-bit sector_t, and also has no reliable checks for devices sizes, which makes it unsafe to use with a kernel that doesn't support large block devices. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Arnd Bergmann <arnd@arndb.de> Fixes: 5c83746a0cf2 ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing") Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-08-11Merge tag 'powerpc-4.13-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "All fixes for code that went in this cycle. - a revert of an optimisation to the syscall exit path, which could lead to an oops on either older machines or machines with > 1TB of memory - disable some deep idle states if the firmware configuration for them fails - re-enable HARD/SOFT lockup detectors in defconfigs after a Kconfig change - six fairly small patches fixing bugs in our new watchdog code Thanks to: Gautham R Shenoy, Nicholas Piggin" * tag 'powerpc-4.13-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/watchdog: add locking around init/exit functions powerpc/watchdog: Fix marking of stuck CPUs powerpc/watchdog: Fix final-check recovered case powerpc/watchdog: Moderate touch_nmi_watchdog overhead powerpc/watchdog: Improve watchdog lock primitive powerpc: NMI IPI improve lock primitive powerpc/configs: Re-enable HARD/SOFT lockup detectors powerpc/powernv/idle: Disable LOSE_FULL_CONTEXT states when stop-api fails Revert "powerpc/64: Avoid restore_math call if possible in syscall exit"
2017-08-11iommu/arm-smmu: fix null-pointer dereference in arm_smmu_add_deviceArtem Savkov
Commit c54451a "iommu/arm-smmu: Fix the error path in arm_smmu_add_device" removed fwspec assignment in legacy_binding path as redundant which is wrong. It needs to be updated after fwspec initialisation in arm_smmu_register_legacy_master() as it is dereferenced later. Without this there is a NULL-pointer dereference panic during boot on some hosts. Signed-off-by: Artem Savkov <asavkov@redhat.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-08-11xen/events: Fix interrupt lost during irq_disable and irq_enableLiu Shuo
Here is a device has xen-pirq-MSI interrupt. Dom0 might lost interrupt during driver irq_disable/irq_enable. Here is the scenario, 1. irq_disable -> disable_dynirq -> mask_evtchn(irq channel) 2. dev interrupt raised by HW and Xen mark its evtchn as pending 3. irq_enable -> startup_pirq -> eoi_pirq -> clear_evtchn(channel of irq) -> clear pending status 4. consume_one_event process the irq event without pending bit assert which result in interrupt lost once 5. No HW interrupt raising anymore. Now use enable_dynirq for enable_pirq of xen_pirq_chip to remove eoi_pirq when irq_enable. Signed-off-by: Liu Shuo <shuo.a.liu@intel.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-08-11xen: avoid deadlock in xenbusJuergen Gross
When starting the xenwatch thread a theoretical deadlock situation is possible: xs_init() contains: task = kthread_run(xenwatch_thread, NULL, "xenwatch"); if (IS_ERR(task)) return PTR_ERR(task); xenwatch_pid = task->pid; And xenwatch_thread() does: mutex_lock(&xenwatch_mutex); ... event->handle->callback(); ... mutex_unlock(&xenwatch_mutex); The callback could call unregister_xenbus_watch() which does: ... if (current->pid != xenwatch_pid) mutex_lock(&xenwatch_mutex); ... In case a watch is firing before xenwatch_pid could be set and the callback of that watch unregisters a watch, then a self-deadlock would occur. Avoid this by setting xenwatch_pid in xenwatch_thread(). Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-08-11Merge branch 'nvme-4.13' of git://git.infradead.org/nvme into for-linusJens Axboe
Pull NVMe fixes from Christoph: "A few more small fixes - the fc/lpfc update is the biggest by far."
2017-08-11xen: fix hvm guest with kaslr enabledJuergen Gross
A Xen HVM guest running with KASLR enabled will die rather soon today because the shared info page mapping is using va() too early. This was introduced by commit a5d5f328b0e2baa5ee7c119fd66324eb79eeeb66 ("xen: allocate page for shared info page from low memory"). In order to fix this use early_memremap() to get a temporary virtual address for shared info until va() can be used safely. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-08-11xen: split up xen_hvm_init_shared_info()Juergen Gross
Instead of calling xen_hvm_init_shared_info() on boot and resume split it up into a boot time function searching for the pfn to use and a mapping function doing the hypervisor mapping call. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-08-11x86: provide an init_mem_mapping hypervisor hookJuergen Gross
Provide a hook in hypervisor_x86 called after setting up initial memory mapping. This is needed e.g. by Xen HVM guests to map the hypervisor shared info page. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-08-11fuse: set mapping error in writepage_locked when it failsJeff Layton
This ensures that we see errors on fsync when writeback fails. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-08-10Merge tag 'drm-fixes-for-v4.13-rc5' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Nothing too earth shattering here, it just seems like lots of little things all over the place. msm has probably the larger amount of changes, but they all seem fine, otherwise, some rockchip, i915, etnaviv and exynos fixes, along with one nouveau regression fix for some older GPUs" * tag 'drm-fixes-for-v4.13-rc5' of git://people.freedesktop.org/~airlied/linux: (35 commits) drm/nouveau/disp/nv04: avoid creation of output paths drm: make DRM_STM default n drm/exynos: forbid creating framebuffers from too small GEM buffers drm/etnaviv: Fix off-by-one error in reloc checking drm/i915: fix backlight invert for non-zero minimum brightness drm/i915/shrinker: Wrap need_resched() inside preempt-disable drm/i915/perf: fix flex eu registers programming drm/i915: Fix out-of-bounds array access in bdw_load_gamma_lut drm/i915/gvt: Change the max length of mmio_reg_rw from 4 to 8 drm/i915/gvt: Initialize MMIO Block with HW state drm/rockchip: vop: report error when check resource error drm/rockchip: vop: round_up pitches to word align drm/rockchip: vop: fix NV12 video display error drm/rockchip: vop: fix iommu page fault when resume drm/i915/gvt: clean workload queue if error happened drm/i915/gvt: change resetting to resetting_eng drm/msm: gpu: don't abuse dma_alloc for non-DMA allocations drm/msm: gpu: call qcom_mdt interfaces only for ARCH_QCOM drm/msm/adreno: Prevent unclocked access when retrieving timestamps drm/msm: Remove __user from __u64 data types ...
generated by cgit (git 2.34.1) at 2025-09-11 16:21:55 +0000