summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-19ARM: 9310/1: xip-kernel: add __inflate_kernel_data prototypeArnd Bergmann
The kernel .data decompression is called from assembler, so it does not need a prototype, but adding one avoids this W=1 warning: arch/arm/kernel/head-inflate-data.c:35:12: error: no previous prototype for '__inflate_kernel_data' [-Werror=missing-prototypes] The same file contains a few extern declarations for assembler symbols, move those into the header as well for consistency. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9309/1: add missing syscall prototypesArnd Bergmann
All architecture-independent system calls have prototypes in include/linux/syscalls.h, but there are a few that only exist on arm or that take the pt_regs directly. These cause a W=1 warning such as: arch/arm/kernel/signal.c:186:16: error: no previous prototype for 'sys_sigreturn' [-Werror=missing-prototypes] arch/arm/kernel/signal.c:216:16: error: no previous prototype for 'sys_rt_sigreturn' [-Werror=missing-prototypes] arch/arm/kernel/sys_arm.c:32:17: error: no previous prototype for 'sys_arm_fadvise64_64' [-Werror=missing-prototypes] Add prototypes for all custom syscalls on arm and add them to asm/syscalls.h. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9308/1: move setup functions to headerArnd Bergmann
A couple of functions are declared in arch/arm/mm/mmu.c rather than in a header, which causes W=1 build warnings: arch/arm/mm/init.c:97:13: error: no previous prototype for 'setup_dma_zone' [-Werror=missing-prototypes] arch/arm/mm/mmu.c:118:13: error: no previous prototype for 'init_default_cache_policy' [-Werror=missing-prototypes] arch/arm/mm/mmu.c:1195:13: error: no previous prototype for 'adjust_lowmem_bounds' [-Werror=missing-prototypes] arch/arm/mm/mmu.c:1761:13: error: no previous prototype for 'paging_init' [-Werror=missing-prototypes] arch/arm/mm/mmu.c:1794:13: error: no previous prototype for 'early_mm_init' [-Werror=missing-prototypes] Move the declaratsion to asm/setup.h so they can be seen by the compiler while building the definition. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9307/1: nommu: include asm/idmap.hArnd Bergmann
setup_mm_for_reboot() is declared in asm/idmap.h but that is not included for the definition, causing a W=1 warning: arch/arm/mm/nommu.c:178:6: error: no previous prototype for 'setup_mm_for_reboot' [-Werror=missing-prototypes] Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9306/1: cacheflush: avoid __flush_anon_page() missing-prototype warningArnd Bergmann
The prototype for __flush_anon_page() is intentionally hidden inside the flush_anon_page() inline function to prevent it from being called from drivers. When building with 'W=1', this causes a warning: arch/arm/mm/flush.c:358:6: error: no previous prototype for '__flush_anon_page' [-Werror=missing-prototypes] Work around this by adding a prototype directly next to the function definition. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9305/1: add clear/copy_user_highpage declarationsArnd Bergmann
The CPU specific helpers have to be global functions when building a kernel for just one CPU, but are called through indirect function pointers in a multi-CPU kernel. This config currently lacks the declarations for the individual helpers, e.g.: arch/arm/mm/copypage-v4wb.c:47:6: error: no previous prototype for 'v4wb_copy_user_highpage' [-Werror=missing-prototypes] arch/arm/mm/copypage-v4wb.c:65:6: error: no previous prototype for 'v4wb_clear_user_highpage' [-Werror=missing-prototypes] Add the complete set of prototypes in asm/page.h to allow building iwth -Wmissing-prototypes. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9304/1: add prototype for function called only from asmArnd Bergmann
When building with 'make W=1', the compiler warns about any function definition that does not come with a prototype in a header, to ensure it matches what the caller expects. This includes functions that are only ever caller from assembly code and don't technically need a declaration: arch/arm/kernel/ftrace.c:227:6: error: no previous prototype for 'prepare_ftrace_return' arch/arm/kernel/ptrace.c:850:16: error: no previous prototype for 'syscall_trace_enter' arch/arm/kernel/ptrace.c:878:17: error: no previous prototype for 'syscall_trace_exit' arch/arm/kernel/signal.c:601:1: error: no previous prototype for 'do_work_pending' arch/arm/kernel/signal.c:672:17: error: no previous prototype for 'do_rseq_syscall' arch/arm/kernel/suspend.c:75:6: error: no previous prototype for '__cpu_suspend_save' arch/arm/kernel/traps.c:451:17: error: no previous prototype for 'do_undefinstr' arch/arm/kernel/traps.c:516:39: error: no previous prototype for 'handle_fiq_as_nmi' arch/arm/kernel/traps.c:535:17: error: no previous prototype for 'bad_mode' arch/arm/kernel/traps.c:608:16: error: no previous prototype for 'arm_syscall' arch/arm/kernel/traps.c:734:1: error: no previous prototype for 'baddataabort' arch/arm/kernel/traps.c:774:17: error: no previous prototype for '__div0' arch/arm/kernel/traps.c:97:6: error: no previous prototype for 'dump_backtrace_stm' arch/arm/kernel/unwind.c:40:6: error: no previous prototype for '__aeabi_unwind_cpp_pr0' arch/arm/kernel/unwind.c:45:6: error: no previous prototype for '__aeabi_unwind_cpp_pr1' arch/arm/kernel/unwind.c:50:6: error: no previous prototype for '__aeabi_unwind_cpp_pr2' arch/arm/mm/fault.c:554:1: error: no previous prototype for 'do_DataAbort' arch/arm/mm/fault.c:584:1: error: no previous prototype for 'do_PrefetchAbort' arch/arm/mm/proc-v7-bugs.c:280:6: error: no previous prototype for 'cpu_v7_ca8_ibe' arch/arm/mm/proc-v7-bugs.c:293:6: error: no previous prototype for 'cpu_v7_bugs_init' arch/arm/vdso/vgettimeofday.c:36:6: error: no previous prototype for '__aeabi_unwind_cpp_pr0' arch/arm/vdso/vgettimeofday.c:40:6: error: no previous prototype for '__aeabi_unwind_cpp_pr1' arch/arm/vdso/vgettimeofday.c:44:6: error: no previous prototype for '__aeabi_unwind_cpp_pr2' arch/arm/vfp/vfpmodule.c:323:6: error: no previous prototype for 'VFP_bounce' Add the prototypes anyway, to allow enabling this warning by default in the future. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9303/1: kprobes: avoid missing-declaration warningsArnd Bergmann
checker_stack_use_t32strd() and kprobe_handler() can be made static since they are not used from other files, while coverage_start_registers() and __kprobes_test_case() are used from assembler code, and just need a declaration to avoid a warning with the global definition. arch/arm/probes/kprobes/checkers-common.c:43:18: error: no previous prototype for 'checker_stack_use_t32strd' arch/arm/probes/kprobes/core.c:236:16: error: no previous prototype for 'kprobe_handler' arch/arm/probes/kprobes/test-core.c:723:10: error: no previous prototype for 'coverage_start_registers' arch/arm/probes/kprobes/test-core.c:918:14: error: no previous prototype for '__kprobes_test_case_start' arch/arm/probes/kprobes/test-core.c:952:14: error: no previous prototype for '__kprobes_test_case_end_16' arch/arm/probes/kprobes/test-core.c:967:14: error: no previous prototype for '__kprobes_test_case_end_32' Fixes: 6624cf651f1a ("ARM: kprobes: collects stack consumption for store instructions") Fixes: 454f3e132d05 ("ARM/kprobes: Remove jprobe arm implementation") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9302/1: traps: hide unused functions on NOMMUArnd Bergmann
A couple of functions in this file are only used on MMU-enabled builds, and never even declared otherwise, causing these build warnings: arch/arm/kernel/traps.c:759:6: error: no previous prototype for '__pte_error' [-Werror=missing-prototypes] arch/arm/kernel/traps.c:764:6: error: no previous prototype for '__pmd_error' [-Werror=missing-prototypes] arch/arm/kernel/traps.c:769:6: error: no previous prototype for '__pgd_error' [-Werror=missing-prototypes] Protect these in an #ifdef to avoid the warnings and save a little bit of .text space. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9301/1: dma-mapping: hide unused dma_contiguous_early_fixup functionArnd Bergmann
The dma_contiguous_early_fixup() function is a global __weak stub with an arm specific override, but the declaration is in an #ifdef. If CONFIG_DMA_CMA is disabled, there is no caller and no prototype, which adds a warning for the definition: arm/mm/dma-mapping.c:261:13: error: no previous prototype for 'dma_contiguous_early_fixup' [-Werror=missing-prototypes] Enclose the definition in the same #ifdef as the prototype to avoid that and save a few bytes of .init.text. Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9300/1: Replace all non-returning strlcpy with strscpyAzeem Shaikh
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 [ardb: submitting to the patch tracker on behalf of Azeem] Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9299/1: module: use sign_extend32() to extend the signednessMasahiro Yamada
The function name clarifies the intention. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19ARM: 9298/1: Drop custom mdesc->handle_irq()Linus Walleij
ARM exclusively uses GENERIC_IRQ_MULTI_HANDLER, so at some point set_handle_irq() needs to be called to handle system-wide interrupts. For all DT-enabled boards, this call happens down in the drivers/irqchip subsystem, after locating the target irqchip driver from the device tree. We still have a few instances of the boardfiles with machine descriptors passing a machine-specific .handle_irq() to the ARM kernel core. Get rid of this by letting the few remaining machines consistently call set_handle_irq() from the end of the .init_irq() callback instead and diet down one member from the machine descriptor. Cc: Marc Zyngier <maz@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-06-19mtd: otp: clean up on error in mtd_otp_nvmem_add()Dan Carpenter
Smatch complains that these error paths are missing cleanup: drivers/mtd/mtdcore.c:983 mtd_otp_nvmem_add() warn: missing unwind goto? This needs to call nvmem_unregister(mtd->otp_user_nvmem) before returning. Fixes: 3b270fac8443 ("mtd: otp: Put factory OTP/NVRAM into the entropy pool") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/fe7ef901-9571-4c6e-a40e-449046efe2c6@moroto.mountain
2023-06-19dt-bindings: mtd: partition: Add missing type for "linux,rootfs"Rob Herring
"linux,rootfs" is missing a type, add it. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230613201014.2823185-1-robh@kernel.org
2023-06-19mtd: maps: pismo: Switch back to use i2c_driver's .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230611204327.828122-1-u.kleine-koenig@pengutronix.de
2023-06-19mtd: rawnand: macronix: OTP access for MX30LFxG18ACArseniy Krasnov
Support for OTP area access on MX30LFxG18AC chip series. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230615094015.3780078-1-AVKrasnov@sberdevices.ru
2023-06-19mtd: rawnand: meson: fix unaligned DMA buffers handlingArseniy Krasnov
Meson NAND controller requires 8 bytes alignment for DMA addresses, otherwise it "aligns" passed address by itself thus accessing invalid location in the provided buffer. This patch makes unaligned buffers to be reallocated to become valid. Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") Cc: <Stable@vger.kernel.org> Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230615080815.3291006-1-AVKrasnov@sberdevices.ru
2023-06-19mtd: rawnand: add support for the Sandisk SDTNQGAMA chipJohan Jonker
Sandisk SDTNQGAMA is a 8GB size, 3.3V 8 bit chip with 16KB page size, 1KB write size and 40 bit ecc support Co-developed-by: Paweł Jarosz <paweljarosz3691@gmail.com> Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com> Signed-off-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/98811c98-4681-6ddc-8287-bd9b77559c51@gmail.com
2023-06-19mtd: rawnand: add basic sandisk manufacturer opsJohan Jonker
Add basic Sandisk manufacturer ops support to get SDTNQGAMA timing data with the nand_get_sdr_timings() function. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/aaf4580a-a368-8f70-c9c4-21b5ed4dd599@gmail.com
2023-06-19tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode().Sebastian Andrzej Siewior
The trace output for the HRTIMER_MODE_.*_HARD modes is seen as a number since these modes are not decoded. The author was not aware of the fancy decoding function which makes the life easier. Extend decode_hrtimer_mode() with the additional HRTIMER_MODE_.*_HARD modes. Fixes: ae6683d815895 ("hrtimer: Introduce HARD expiry mode") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20230418143854.8vHWQKLM@linutronix.de
2023-06-18Linux 6.4-rc7v6.4-rc7Linus Torvalds
2023-06-18posix-timers: Add sys_ni_posix_timers() prototypeArnd Bergmann
The sys_ni_posix_timers() definition causes a warning when the declaration is missing, so this needs to be added along with the normal syscalls, outside of the #ifdef. kernel/time/posix-stubs.c:26:17: error: no previous prototype for 'sys_ni_posix_timers' [-Werror=missing-prototypes] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230607142925.3126422-1-arnd@kernel.org
2023-06-18tick/rcu: Fix bogus ratelimit conditionWen Yang
The ratelimit logic in report_idle_softirq() is broken because the exit condition is always true: static int ratelimit; if (ratelimit < 10) return false; ---> always returns here ratelimit++; ---> no chance to run Make it check for >= 10 instead. Fixes: 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") Signed-off-by: Wen Yang <wenyang.linux@foxmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/tencent_5AAA3EEAB42095C9B7740BE62FBF9A67E007@qq.com
2023-06-18alarmtimer: Remove unnecessary (void *) castLi zeming
Pointers of type void * do not require a type cast when they are assigned to a real pointer. Signed-off-by: Li zeming <zeming@nfschina.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230609182059.4509-1-zeming@nfschina.com
2023-06-18alarmtimer: Remove unnecessary initialization of variable 'ret'Li zeming
ret is assigned before checked, so it does not need to initialize the variable Signed-off-by: Li zeming <zeming@nfschina.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230609182856.4660-1-zeming@nfschina.com
2023-06-18posix-timers: Refer properly to CONFIG_HIGH_RES_TIMERSLukas Bulwahn
Commit c78f261e5dcb ("posix-timers: Clarify posix_timer_fn() comments") turns an ifdef CONFIG_HIGH_RES_TIMERS into an conditional on "IS_ENABLED(CONFIG_HIGHRES_TIMERS)"; note that the new conditional refers to "HIGHRES_TIMERS" not "HIGH_RES_TIMERS" as before. Fix this typo introduced in that refactoring. Fixes: c78f261e5dcb ("posix-timers: Clarify posix_timer_fn() comments") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230609094643.26253-1-lukas.bulwahn@gmail.com
2023-06-18posix-timers: Polish coding style in a few placesThomas Gleixner
Make it consistent with the TIP tree documentation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230425183313.888493625@linutronix.de
2023-06-18posix-timers: Remove pointless commentsThomas Gleixner
Documenting the obvious is just consuming space for no value. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230425183313.832240451@linutronix.de
2023-06-18posix-timers: Clarify posix_timer_fn() commentsThomas Gleixner
Make the issues vs. SIG_IGN understandable and remove the 15 years old promise that a proper solution is already on the horizon. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/874jnrdmrq.ffs@tglx
2023-06-18posix-timers: Clarify posix_timer_rearm() commentThomas Gleixner
Yet another incomprehensible piece of art. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230425183313.724863461@linutronix.de
2023-06-18posix-timers: Comment SIGEV_THREAD_ID properlyThomas Gleixner
Replace the word salad. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230425183313.672220780@linutronix.de
2023-06-18posix-timers: Add proper comments in do_timer_create()Thomas Gleixner
The comment about timer lifetime at the end of the function is misplaced and uncomprehensible. Make it understandable and put it at the right place. Add a new comment about the visibility of the new timer ID to user space. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230425183313.619897296@linutronix.de
2023-06-18posix-timers: Document nanosleep() detailsThomas Gleixner
The descriptions for common_nsleep() is wrong and common_nsleep_timens() lacks any form of comment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230425183313.567072835@linutronix.de
2023-06-18posix-timers: Document sys_clock_settime() permissions in placeThomas Gleixner
The documentation of sys_clock_settime() permissions is at a random place and mostly word salad. Remove it and add a concise comment into sys_clock_settime(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230425183313.514700292@linutronix.de
2023-06-18posix-timers: Document sys_clock_getoverrun()Thomas Gleixner
Document the syscall in detail and with coherent sentences. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230425183313.462051641@linutronix.de
2023-06-18posix-timers: Document common_clock_get() correctlyThomas Gleixner
Replace another confusing and inaccurate set of comments. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230425183313.409169321@linutronix.de
2023-06-18posix-timers: Document sys_clock_getres() correctlyThomas Gleixner
The decades old comment about Posix clock resolution is confusing at best. Remove it and add a proper explanation to sys_clock_getres(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230425183313.356427330@linutronix.de
2023-06-18posix-timers: Split release_posix_timers()Thomas Gleixner
release_posix_timers() is called for cleaning up both hashed and unhashed timers. The cases are differentiated by an argument and the usage is hideous. Seperate the actual free path out and use it for unhashed timers. Provide a function for hashed timers. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230425183313.301432503@linutronix.de
2023-06-18posix-timers: Remove pointless irqsafe from hash_lockThomas Gleixner
All usage of hash_lock is in thread context. No point in using spin_lock_irqsave()/irqrestore() for a single usage site. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230425183313.249063953@linutronix.de
2023-06-18posix-timers: Set k_itimer:: It_signal to NULL on exit()Thomas Gleixner
Technically it's not required to set k_itimer::it_signal to NULL on exit() because there is no other thread anymore which could lookup the timer concurrently. Set it to NULL for consistency sake and add a comment to that effect. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230425183313.196462644@linutronix.de
2023-06-18posix-timers: Annotate concurrent access to k_itimer:: It_signalThomas Gleixner
k_itimer::it_signal is read lockless in the RCU protected hash lookup, but it can be written concurrently in the timer_create() and timer_delete() path. Annotate these places with READ_ONCE() and WRITE_ONCE() Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230425183313.143596887@linutronix.de
2023-06-18posix-timers: Add comments about timer lookupThomas Gleixner
Document how the timer ID validation in the hash table works. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230425183313.091081515@linutronix.de
2023-06-18posix-timers: Cleanup comments about timer ID trackingThomas Gleixner
Describe the hash table properly and remove the IDR leftover comments. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230425183313.038444551@linutronix.de
2023-06-18posix-timers: Clarify timer_wait_running() commentThomas Gleixner
Explain it better and add the CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y aspect for completeness. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230425183312.985681995@linutronix.de
2023-06-18posix-timers: Ensure timer ID search-loop limit is validThomas Gleixner
posix_timer_add() tries to allocate a posix timer ID by starting from the cached ID which was stored by the last successful allocation. This is done in a loop searching the ID space for a free slot one by one. The loop has to terminate when the search wrapped around to the starting point. But that's racy vs. establishing the starting point. That is read out lockless, which leads to the following problem: CPU0 CPU1 posix_timer_add() start = sig->posix_timer_id; lock(hash_lock); ... posix_timer_add() if (++sig->posix_timer_id < 0) start = sig->posix_timer_id; sig->posix_timer_id = 0; So CPU1 can observe a negative start value, i.e. -1, and the loop break never happens because the condition can never be true: if (sig->posix_timer_id == start) break; While this is unlikely to ever turn into an endless loop as the ID space is huge (INT_MAX), the racy read of the start value caught the attention of KCSAN and Dmitry unearthed that incorrectness. Rewrite it so that all id operations are under the hash lock. Reported-by: syzbot+5c54bd3eb218bb595aa9@syzkaller.appspotmail.com Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/87bkhzdn6g.ffs@tglx
2023-06-18posix-timers: Prevent RT livelock in itimer_delete()Thomas Gleixner
itimer_delete() has a retry loop when the timer is concurrently expired. On non-RT kernels this just spin-waits until the timer callback has completed, except for posix CPU timers which have HAVE_POSIX_CPU_TIMERS_TASK_WORK enabled. In that case and on RT kernels the existing task could live lock when preempting the task which does the timer delivery. Replace spin_unlock() with an invocation of timer_wait_running() to handle it the same way as the other retry loops in the posix timer code. Fixes: ec8f954a40da ("posix-timers: Use a callback for cancel synchronization on PREEMPT_RT") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/87v8g7c50d.ffs@tglx
2023-06-18Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four fixes, all in drivers: three fairly obvious small ones and a large one in aacraid to add block queue completion mapping and fix a CPU offline hang" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Fix incorrect big endian type assignment in bsg loopback path scsi: target: core: Fix error path in target_setup_session() scsi: storvsc: Always set no_report_opcodes scsi: aacraid: Reply queue mapping to CPUs based on IRQ affinity
2023-06-18Merge tag 'ata-6.4-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata fix from Damien Le Moal: - Avoid deadlocks on resume from sleep by delaying scsi rescan until the scsi device is also fully resumed. * tag 'ata-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: libata-scsi: Avoid deadlock on rescan after device resume
2023-06-18Merge tag 'parisc-for-6.4-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: - Drop redundant register definitions to fix build with latest binutils * tag 'parisc-for-6.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Delete redundant register definitions in <asm/assembly.h>
generated by cgit (git 2.34.1) at 2025-10-03 06:35:32 +0000