summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-01-10affs: initialize fsdata in affs_truncate()Alexander Potapenko
When aops->write_begin() does not initialize fsdata, KMSAN may report an error passing the latter to aops->write_end(). Fix this by unconditionally initializing fsdata. Fixes: f2b6a16eb8f5 ("fs: affs convert to new aops") Suggested-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-01-10perf build: Fix build error when NO_LIBBPF=1Ian Rogers
The $(LIBBPF) target should only be a dependency of prepare if the static version of libbpf is needed. Add a new LIBBPF_STATIC variable that is set by Makefile.config. Use LIBBPF_STATIC to determine whether the CFLAGS, etc. need updating and for adding $(LIBBPF) as a prepare dependency. As Makefile.config isn't loaded for "clean" as a target, always set LIBBPF_OUTPUT regardless of whether it is needed for $(LIBBPF). This is done to minimize conditional logic for $(LIBBPF)-clean. This issue and an original fix was reported by Mike Leach in: https://lore.kernel.org/lkml/20230105172243.7238-1-mike.leach@linaro.org/ Fixes: 746bd29e348f99b4 ("perf build: Use tools/lib headers from install path") Reported-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: bpf@vger.kernel.org Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20230106151320.619514-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-10perf tools: Don't install libtraceevent plugins as its not anymore in the ↵Arnaldo Carvalho de Melo
kernel sources While doing 'make -C tools/perf build-test' one can notice error messages while trying to install libtraceevent plugins, stop doing that as libtraceevent isn't anymore a homie. These are the warnings dealt with: make_install_prefix_slash_O: make install prefix=/tmp/krava/ failed to find: /tmp/krava/etc/bash_completion.d/perf failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_cfg80211.so failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_scsi.so failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_xen.so failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_function.so failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_sched_switch.so failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_mac80211.so failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_kvm.so failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_kmem.so failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_hrtimer.so failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_jbd2.so Fixes: 4171925aa9f3f7bf ("tools lib traceevent: Remove libtraceevent") Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lore.kernel.org/lkml/Y7xXz+TSpiCbQGjw@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-10perf kmem: Support field "node" in evsel__process_alloc_event() coping with ↵Leo Yan
recent tracepoint restructuring Commit 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of tracepoints") adds the field "node" into the tracepoints 'kmalloc' and 'kmem_cache_alloc', so this patch modifies the event process function to support the field "node". If field "node" is detected by checking function evsel__field(), it stats the cross allocation. When the "node" value is NUMA_NO_NODE (-1), it means the memory can be allocated from any memory node, in this case, we don't account it as a cross allocation. Fixes: 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of tracepoints") Reported-by: Ravi Bangoria <ravi.bangoria@amd.com> Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/r/20230108062400.250690-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-10perf kmem: Support legacy tracepointsLeo Yan
Commit 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of tracepoints") removed tracepoints 'kmalloc_node' and 'kmem_cache_alloc_node', we need to consider the tool should be backward compatible. If it detect the tracepoint "kmem:kmalloc_node", this patch enables the legacy tracepoints, otherwise, it will ignore them. Fixes: 11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of tracepoints") Reported-by: Ravi Bangoria <ravi.bangoria@amd.com> Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/r/20230108062400.250690-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-10perf build: Properly guard libbpf includesIan Rogers
Including libbpf header files should be guarded by HAVE_LIBBPF_SUPPORT. In bpf_counter.h, move the skeleton utilities under HAVE_BPF_SKEL. Fixes: d6a735ef3277c45f ("perf bpf_counter: Move common functions to bpf_counter.h") Reported-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Mike Leach <mike.leach@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20230105172243.7238-1-mike.leach@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-10s390/kexec: fix ipl report address for kdumpAlexander Egorenkov
This commit addresses the following erroneous situation with file-based kdump executed on a system with a valid IPL report. On s390, a kdump kernel, its initrd and IPL report if present are loaded into a special and reserved on boot memory region - crashkernel. When a system crashes and kdump was activated before, the purgatory code is entered first which swaps the crashkernel and [0 - crashkernel size] memory regions. Only after that the kdump kernel is entered. For this reason, the pointer to an IPL report in lowcore must point to the IPL report after the swap and not to the address of the IPL report that was located in crashkernel memory region before the swap. Failing to do so, makes the kdump's decompressor try to read memory from the crashkernel memory region which already contains the production's kernel memory. The situation described above caused spontaneous kdump failures/hangs on systems where the Secure IPL is activated because on such systems an IPL report is always present. In that case kdump's decompressor tried to parse an IPL report which frequently lead to illegal memory accesses because an IPL report contains addresses to various data. Cc: <stable@vger.kernel.org> Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel") Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-10drm/debugfs: add descriptions to struct parametersMaíra Canal
The structs drm_debugfs_info and drm_debugfs_entry don't have descriptions for their parameters, which is causing the following warnings: include/drm/drm_debugfs.h:93: warning: Function parameter or member 'name' not described in 'drm_debugfs_info' include/drm/drm_debugfs.h:93: warning: Function parameter or member 'show' not described in 'drm_debugfs_info' include/drm/drm_debugfs.h:93: warning: Function parameter or member 'driver_features' not described in 'drm_debugfs_info' include/drm/drm_debugfs.h:93: warning: Function parameter or member 'data' not described in 'drm_debugfs_info' include/drm/drm_debugfs.h:105: warning: Function parameter or member 'dev' not described in 'drm_debugfs_entry' include/drm/drm_debugfs.h:105: warning: Function parameter or member 'file' not described in 'drm_debugfs_entry' include/drm/drm_debugfs.h:105: warning: Function parameter or member 'list' not described in 'drm_debugfs_entry' Therefore, fix the warnings by adding descriptions to all struct parameters. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230105193039.287677-2-mcanal@igalia.com
2023-01-10drm/debugfs: use octal permissions instead of symbolic permissionsMaíra Canal
Currently, debugfs functions are using symbolic macros as permission bits, but checkpatch reinforces permission bits in the octal form, as they are more readable and easier to understand [1]. Moreover, using the symbolic macro S_IFREG is redundant. Therefore, use octal permission bits in all debugfs functions. [1] https://docs.kernel.org/dev-tools/checkpatch.html#permissions Suggested-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230105193039.287677-1-mcanal@igalia.com
2023-01-10ASoC: fsl-asoc-card: Fix naming of AC'97 CODEC widgetsMark Brown
The fsl-asoc-card AC'97 support currently tries to route to Playback and Capture widgets provided by the AC'97 CODEC. This doesn't work since the generic AC'97 driver registers with an "AC97" at the front of the stream and hence widget names, update to reflect reality. It's not clear to me if or how this ever worked. Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230106-asoc-udoo-probe-v1-2-a5d7469d4f67@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-10ASoC: fsl_ssi: Rename AC'97 streams to avoid collisions with AC'97 CODECMark Brown
The SSI driver calls the AC'97 playback and transmit streams "AC97 Playback" and "AC97 Capture" respectively. This is the same name used by the generic AC'97 CODEC driver in ASoC, creating confusion for the Freescale ASoC card when it attempts to use these widgets in routing. Add a "CPU" in the name like the regular DAIs registered by the driver to disambiguate. Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230106-asoc-udoo-probe-v1-1-a5d7469d4f67@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-10MAINTAINERS: Add entry for Himax HX8394 panel controller driverJavier Martinez Canillas
Add myself as maintainer for the driver and devicetree bindings schema. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230102230733.3506624-4-javierm@redhat.com
2023-01-10drm: panel: Add Himax HX8394 panel controller driverKamil Trzciński
The driver is for panels based on the Himax HX8394 controller, such as the HannStar HSD060BHW4 720x1440 TFT LCD panel that uses a MIPI-DSI interface. Signed-off-by: Kamil Trzciński <ayufan@ayufan.eu> Co-developed-by: Ondrej Jirman <megi@xff.cz> Signed-off-by: Ondrej Jirman <megi@xff.cz> Co-developed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230102230733.3506624-3-javierm@redhat.com
2023-01-10dt-bindings: display: Add Himax HX8394 panel controllerJavier Martinez Canillas
Add device tree bindings for panels based on the Himax HX8394 controller, such as the HannStar HSD060BHW4 720x1440 TFT LCD panel that is connected through a MIPI-DSI video interface. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230102230733.3506624-2-javierm@redhat.com
2023-01-10wifi: mac80211: fix MLO + AP_VLAN checkFelix Fietkau
Instead of preventing adding AP_VLAN to MLO enabled APs, this check was preventing adding more than one 4-addr AP_VLAN regardless of the MLO status. Fix this by adding missing extra checks. Fixes: ae960ee90bb1 ("wifi: mac80211: prevent VLANs on MLDs") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20221214130326.37756-1-nbd@nbd.name Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-10mac80211: Fix MLO address translation for multiple bss caseSriram R
When multiple interfaces are present in the local interface list, new skb copy is taken before rx processing except for the first interface. The address translation happens each time only on the original skb since the hdr pointer is not updated properly to the newly created skb. As a result frames start to drop in userspace when address based checks or search fails. Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/20221208040050.25922-1-quic_srirrama@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-10wifi: mac80211: reset multiple BSSID options in stop_ap()Aloka Dixit
Reset multiple BSSID options when all AP related configurations are reset in ieee80211_stop_ap(). Stale values result in HWSIM test failures (e.g. p2p_group_cli_invalid), if run after 'he_ap_ema'. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20221221185616.11514-1-quic_alokad@quicinc.com Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-10wifi: mac80211: Fix iTXQ AMPDU fragmentation handlingAlexander Wetzel
mac80211 must not enable aggregation wile transmitting a fragmented MPDU. Enforce that for mac80211 internal TX queues (iTXQs). Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/oe-lkp/202301021738.7cd3e6ae-oliver.sang@intel.com Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20230106223141.98696-1-alexander@wetzel-home.de Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-10wifi: mac80211: sdata can be NULL during AMPDU startAlexander Wetzel
ieee80211_tx_ba_session_handle_start() may get NULL for sdata when a deauthentication is ongoing. Here a trace triggering the race with the hostapd test multi_ap_fronthaul_on_ap: (gdb) list *drv_ampdu_action+0x46 0x8b16 is in drv_ampdu_action (net/mac80211/driver-ops.c:396). 391 int ret = -EOPNOTSUPP; 392 393 might_sleep(); 394 395 sdata = get_bss_sdata(sdata); 396 if (!check_sdata_in_driver(sdata)) 397 return -EIO; 398 399 trace_drv_ampdu_action(local, sdata, params); 400 wlan0: moving STA 02:00:00:00:03:00 to state 3 wlan0: associated wlan0: deauthenticating from 02:00:00:00:03:00 by local choice (Reason: 3=DEAUTH_LEAVING) wlan3.sta1: Open BA session requested for 02:00:00:00:00:00 tid 0 wlan3.sta1: dropped frame to 02:00:00:00:00:00 (unauthorized port) wlan0: moving STA 02:00:00:00:03:00 to state 2 wlan0: moving STA 02:00:00:00:03:00 to state 1 wlan0: Removed STA 02:00:00:00:03:00 wlan0: Destroyed STA 02:00:00:00:03:00 BUG: unable to handle page fault for address: fffffffffffffb48 PGD 11814067 P4D 11814067 PUD 11816067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 2 PID: 133397 Comm: kworker/u16:1 Tainted: G W 6.1.0-rc8-wt+ #59 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Workqueue: phy3 ieee80211_ba_session_work [mac80211] RIP: 0010:drv_ampdu_action+0x46/0x280 [mac80211] Code: 53 48 89 f3 be 89 01 00 00 e8 d6 43 bf ef e8 21 46 81 f0 83 bb a0 1b 00 00 04 75 0e 48 8b 9b 28 0d 00 00 48 81 eb 10 0e 00 00 <8b> 93 58 09 00 00 f6 c2 20 0f 84 3b 01 00 00 8b 05 dd 1c 0f 00 85 RSP: 0018:ffffc900025ebd20 EFLAGS: 00010287 RAX: 0000000000000000 RBX: fffffffffffff1f0 RCX: ffff888102228240 RDX: 0000000080000000 RSI: ffffffff918c5de0 RDI: ffff888102228b40 RBP: ffffc900025ebd40 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888118c18ec0 R13: 0000000000000000 R14: ffffc900025ebd60 R15: ffff888018b7efb8 FS: 0000000000000000(0000) GS:ffff88817a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffb48 CR3: 0000000105228006 CR4: 0000000000170ee0 Call Trace: <TASK> ieee80211_tx_ba_session_handle_start+0xd0/0x190 [mac80211] ieee80211_ba_session_work+0xff/0x2e0 [mac80211] process_one_work+0x29f/0x620 worker_thread+0x4d/0x3d0 ? process_one_work+0x620/0x620 kthread+0xfb/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20221230121850.218810-2-alexander@wetzel-home.de Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-10wifi: mac80211: Proper mark iTXQs for resumptionAlexander Wetzel
When a running wake_tx_queue() call is aborted due to a hw queue stop the corresponding iTXQ is not always correctly marked for resumption: wake_tx_push_queue() can stops the queue run without setting @IEEE80211_TXQ_STOP_NETIF_TX. Without the @IEEE80211_TXQ_STOP_NETIF_TX flag __ieee80211_wake_txqs() will not schedule a new queue run and remaining frames in the queue get stuck till another frame is queued to it. Fix the issue for all drivers - also the ones with custom wake_tx_queue callbacks - by moving the logic into ieee80211_tx_dequeue() and drop the redundant @txqs_stopped. @IEEE80211_TXQ_STOP_NETIF_TX is also renamed to @IEEE80211_TXQ_DIRTY to better describe the flag. Fixes: c850e31f79f0 ("wifi: mac80211: add internal handler for wake_tx_queue") Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20221230121850.218810-1-alexander@wetzel-home.de Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-10wifi: mac80211: fix initialization of rx->link and rx->link_staFelix Fietkau
There are some codepaths that do not initialize rx->link_sta properly. This causes a crash in places which assume that rx->link_sta is valid if rx->sta is valid. One known instance is triggered by __ieee80211_rx_h_amsdu being called from fast-rx. It results in a crash like this one: BUG: kernel NULL pointer dereference, address: 00000000000000a8 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP PTI CPU: 1 PID: 506 Comm: mt76-usb-rx phy Tainted: G E 6.1.0-debian64x+1.7 #3 Hardware name: ZOTAC ZBOX-ID92/ZBOX-IQ01/ZBOX-ID92/ZBOX-IQ01, BIOS B220P007 05/21/2014 RIP: 0010:ieee80211_deliver_skb+0x62/0x1f0 [mac80211] Code: 00 48 89 04 24 e8 9e a7 c3 df 89 c0 48 03 1c c5 a0 ea 39 a1 4c 01 6b 08 48 ff 03 48 83 7d 28 00 74 11 48 8b 45 30 48 63 55 44 <48> 83 84 d0 a8 00 00 00 01 41 8b 86 c0 11 00 00 8d 50 fd 83 fa 01 RSP: 0018:ffff999040803b10 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffffb9903f496480 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff999040803ce0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8d21828ac900 R13: 000000000000004a R14: ffff8d2198ed89c0 R15: ffff8d2198ed8000 FS: 0000000000000000(0000) GS:ffff8d24afe80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a8 CR3: 0000000429810002 CR4: 00000000001706e0 Call Trace: <TASK> __ieee80211_rx_h_amsdu+0x1b5/0x240 [mac80211] ? ieee80211_prepare_and_rx_handle+0xcdd/0x1320 [mac80211] ? __local_bh_enable_ip+0x3b/0xa0 ieee80211_prepare_and_rx_handle+0xcdd/0x1320 [mac80211] ? prepare_transfer+0x109/0x1a0 [xhci_hcd] ieee80211_rx_list+0xa80/0xda0 [mac80211] mt76_rx_complete+0x207/0x2e0 [mt76] mt76_rx_poll_complete+0x357/0x5a0 [mt76] mt76u_rx_worker+0x4f5/0x600 [mt76_usb] ? mt76_get_min_avg_rssi+0x140/0x140 [mt76] __mt76_worker_fn+0x50/0x80 [mt76] kthread+0xed/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Since the initialization of rx->link and rx->link_sta is rather convoluted and duplicated in many places, clean it up by using a helper function to set it. Fixes: ccdde7c74ffd ("wifi: mac80211: properly implement MLO key handling") Fixes: b320d6c456ff ("wifi: mac80211: use correct rx link_sta instead of default") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20221230200747.19040-1-nbd@nbd.name [remove unnecessary rx->sta->sta.mlo check] Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-10drm/i915/gt: Reset twiceChris Wilson
After applying an engine reset, on some platforms like Jasperlake, we occasionally detect that the engine state is not cleared until shortly after the resume. As we try to resume the engine with volatile internal state, the first request fails with a spurious CS event (it looks like it reports a lite-restore to the hung context, instead of the expected idle->active context switch). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221212161338.1007659-1-andi.shyti@linux.intel.com
2023-01-10x86/boot: Avoid using Intel mnemonics in AT&T syntax asmPeter Zijlstra
With 'GNU assembler (GNU Binutils for Debian) 2.39.90.20221231' the build now reports: arch/x86/realmode/rm/../../boot/bioscall.S: Assembler messages: arch/x86/realmode/rm/../../boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant arch/x86/realmode/rm/../../boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant arch/x86/boot/bioscall.S: Assembler messages: arch/x86/boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant arch/x86/boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant Which is due to: PR gas/29525 Note that with the dropped CMPSD and MOVSD Intel Syntax string insn templates taking operands, mixed IsString/non-IsString template groups (with memory operands) cannot occur anymore. With that maybe_adjust_templates() becomes unnecessary (and is hence being removed). More details: https://sourceware.org/bugzilla/show_bug.cgi?id=29525 Borislav Petkov further explains: " the particular problem here is is that the 'd' suffix is "conflicting" in the sense that you can have SSE mnemonics like movsD %xmm... and the same thing also for string ops (which is the case here) so apparently the agreement in binutils land is to use the always accepted suffixes 'l' or 'q' and phase out 'd' slowly... " Fixes: 7a734e7dd93b ("x86, setup: "glove box" BIOS calls -- infrastructure") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/Y71I3Ex2pvIxMpsP@hirez.programming.kicks-ass.net
2023-01-10doc: add dma-buf IOCTL code to tableSimon Ser
The code 'b' is used for dma-buf IOCTLs. Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Christian König <christian.koenig@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221128133853.355645-1-contact@emersion.fr
2023-01-10Merge tag '6.2-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull ksmb server fixes from Steve French: - fix possible infinite loop in socket handler - fix possible panic in ntlmv2 authentication - fix error handling on tree connect * tag '6.2-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: fix infinite loop in ksmbd_conn_handler_loop() ksmbd: check nt_len to be at least CIFS_ENCPWD_SIZE in ksmbd_decode_ntlmssp_auth_blob ksmbd: send proper error response in smb2_tree_connect()
2023-01-10sh/mm: Fix pmd_t for realPeter Zijlstra
Because typing is hard... Fixes: 0862ff059c9e ("sh/mm: Make pmd_t similar to pte_t") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-01-10drm/vc4: dsi: Drop unused i2c includeUwe Kleine-König
The driver doesn't make use of any symbol provided by <linux/i2c.h>. So drop the include. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221219084023.1402282-1-u.kleine-koenig@pengutronix.de
2023-01-10MAINTAINERS: drm/hisilicon: Drop Chen FengUwe Kleine-König
The listed address doesn't work any more: puck.chen@hisilicon.com host mx5.hisilicon.com [124.71.93.234] SMTP error from remote mail server after RCPT TO:<puck.chen@hisilicon.com>: 551 5.1.1 <puck.chen@hisilicon.com>: Recipient address rejected: Failed recipient validation check.: host 127.0.0.1[127.0.0.1] said: 554 5.7.1 recipient verify from ldap failed (in reply to RCPT TO command) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221219085307.1403247-1-u.kleine-koenig@pengutronix.de
2023-01-10drm/amdgpu: fix pipeline sync v2Christian König
This fixes a potential memory leak of dma_fence objects in the CS code as well as glitches in firefox because of missing pipeline sync. v2: use the scheduler instead of the fence context Signed-off-by: Christian König <christian.koenig@amd.com> Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2323 Tested-by: Michal Kubecek mkubecek@suse.cz Tested-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230109130120.73389-1-christian.koenig@amd.com
2023-01-10IB/hfi1: Remove user expected buffer invalidate raceDean Luick
During setup, there is a possible race between a page invalidate and hardware programming. Add a covering invalidate over the user target range during setup. If anything within that range is invalidated during setup, fail the setup. Once set up, each TID will have its own invalidate callback and invalidate. Fixes: 3889551db212 ("RDMA/hfi1: Use mmu_interval_notifier_insert for user_exp_rcv") Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Link: https://lore.kernel.org/r/167328549178.1472310.9867497376936699488.stgit@awfm-02.cornelisnetworks.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-01-10IB/hfi1: Immediately remove invalid memory from hardwareDean Luick
When a user expected receive page is unmapped, it should be immediately removed from hardware rather than depend on a reaction from user space. Fixes: 2677a7680e77 ("IB/hfi1: Fix memory leak during unexpected shutdown") Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Link: https://lore.kernel.org/r/167328548663.1472310.7871808081861622659.stgit@awfm-02.cornelisnetworks.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-01-10IB/hfi1: Fix expected receive setup error exit issuesDean Luick
Fix three error exit issues in expected receive setup. Re-arrange error exits to increase readability. Issues and fixes: 1. Possible missed page unpin if tidlist copyout fails and not all pinned pages where made part of a TID. Fix: Unpin the unused pages. 2. Return success with unset return values tidcnt and length when no pages were pinned. Fix: Return -ENOSPC if no pages were pinned. 3. Return success with unset return values tidcnt and length when no rcvarray entries available. Fix: Return -ENOSPC if no rcvarray entries are available. Fixes: 7e7a436ecb6e ("staging/hfi1: Add TID entry program function body") Fixes: 97736f36dbeb ("IB/hfi1: Validate page aligned for a given virtual addres") Fixes: f404ca4c7ea8 ("IB/hfi1: Refactor hfi_user_exp_rcv_setup() IOCTL") Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Link: https://lore.kernel.org/r/167328548150.1472310.1492305874804187634.stgit@awfm-02.cornelisnetworks.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-01-10IB/hfi1: Reserve user expected TIDsDean Luick
To avoid a race, reserve the number of user expected TIDs before setup. Fixes: 7e7a436ecb6e ("staging/hfi1: Add TID entry program function body") Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Link: https://lore.kernel.org/r/167328547636.1472310.7419712824785353905.stgit@awfm-02.cornelisnetworks.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-01-10IB/hfi1: Reject a zero-length user expected bufferDean Luick
A zero length user buffer makes no sense and the code does not handle it correctly. Instead, reject a zero length as invalid. Fixes: 97736f36dbeb ("IB/hfi1: Validate page aligned for a given virtual addres") Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Link: https://lore.kernel.org/r/167328547120.1472310.6362802432127399257.stgit@awfm-02.cornelisnetworks.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-01-10RDMA/core: Fix ib block iterator counter overflowYonatan Nachum
When registering a new DMA MR after selecting the best aligned page size for it, we iterate over the given sglist to split each entry to smaller, aligned to the selected page size, DMA blocks. In given circumstances where the sg entry and page size fit certain sizes and the sg entry is not aligned to the selected page size, the total size of the aligned pages we need to cover the sg entry is >= 4GB. Under this circumstances, while iterating page aligned blocks, the counter responsible for counting how much we advanced from the start of the sg entry is overflowed because its type is u32 and we pass 4GB in size. This can lead to an infinite loop inside the iterator function because the overflow prevents the counter to be larger than the size of the sg entry. Fix the presented problem by changing the advancement condition to eliminate overflow. Backtrace: [ 192.374329] efa_reg_user_mr_dmabuf [ 192.376783] efa_register_mr [ 192.382579] pgsz_bitmap 0xfffff000 rounddown 0x80000000 [ 192.386423] pg_sz [0x80000000] umem_length[0xc0000000] [ 192.392657] start 0x0 length 0xc0000000 params.page_shift 31 params.page_num 3 [ 192.399559] hp_cnt[3], pages_in_hp[524288] [ 192.403690] umem->sgt_append.sgt.nents[1] [ 192.407905] number entries: [1], pg_bit: [31] [ 192.411397] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8] [ 192.415601] biter->__sg_advance [665837568] sg_dma_len[3221225472] [ 192.419823] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8] [ 192.423976] biter->__sg_advance [2813321216] sg_dma_len[3221225472] [ 192.428243] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8] [ 192.432397] biter->__sg_advance [665837568] sg_dma_len[3221225472] Fixes: a808273a495c ("RDMA/verbs: Add a DMA iterator to return aligned contiguous memory blocks") Signed-off-by: Yonatan Nachum <ynachum@amazon.com> Link: https://lore.kernel.org/r/20230109133711.13678-1-ynachum@amazon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-01-10drm: Only select I2C_ALGOBIT for drivers that actually need itUwe Kleine-König
While working on a drm driver that doesn't need the i2c algobit stuff I noticed that DRM selects this code even though only 8 drivers actually use it. While also only some drivers use i2c, keep the select for I2C for the next cleanup patch. Still prepare this already by also selecting I2C for the individual drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221219083627.1401627-1-u.kleine-koenig@pengutronix.de
2023-01-10drm/panel: raspberrypi-touchscreen: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118224540.619276-44-uwe@kleine-koenig.org
2023-01-10drm/panel: olimex-lcd-olinuxino: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118224540.619276-43-uwe@kleine-koenig.org
2023-01-10drm/i2c/tda998x: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118224540.619276-42-uwe@kleine-koenig.org
2023-01-10drm/i2c/tda9950: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118224540.619276-41-uwe@kleine-koenig.org
2023-01-10drm/i2c/sil164: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118224540.619276-40-uwe@kleine-koenig.org
2023-01-10drm/i2c/ch7006: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118224540.619276-39-uwe@kleine-koenig.org
2023-01-10drm/mxsfb: improve clk handling for axi clkUwe Kleine-König
Ignoring errors from devm_clk_get() is wrong. To handle not all platforms having an axi clk use devm_clk_get_optional() instead and do proper error handling. Also the clk API handles NULL as a dummy clk (which is also returned by devm_clk_get_optional() if there is no clk) so there is no need to check for NULL before calling clk_prepare_enable() or its counter part. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200720153254.18071-1-u.kleine-koenig@pengutronix.de
2023-01-10octeontx2-pf: Fix resource leakage in VF driver unbindHariprasad Kelam
resources allocated like mcam entries to support the Ntuple feature and hash tables for the tc feature are not getting freed in driver unbind. This patch fixes the issue. Fixes: 2da489432747 ("octeontx2-pf: devlink params support to set mcam entry count") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/20230109061325.21395-1-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10arm64: dts: marvell: AC5/AC5X: Fix address for UART1Chris Packham
The correct address offset is 0x12100. Fixes: 31be791e26cf ("arm64: dts: marvell: Add UART1-3 for AC5/AC5X") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2023-01-10Merge branch 'selftests-net-isolate-l2_tos_ttl_inherit-sh-in-its-own-netns'Paolo Abeni
Guillaume Nault says: ==================== selftests/net: Isolate l2_tos_ttl_inherit.sh in its own netns. l2_tos_ttl_inherit.sh uses a veth pair to run its tests, but only one of the veth interfaces runs in a dedicated netns. The other one remains in the initial namespace where the existing network configuration can interfere with the setup used for the tests. Isolate both veth devices in their own netns and ensure everything gets cleaned up when the script exits. Link: https://lore.kernel.org/netdev/924f1062-ab59-9b88-3b43-c44e73a30387@alu.unizg.hr/ ==================== Link: https://lore.kernel.org/r/cover.1673191942.git.gnault@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.Guillaume Nault
Use 'set -e' and an exit handler to stop the script if a command fails and ensure the test environment is cleaned up in any case. Also, handle the case where the script is interrupted by SIGINT. The only command that's expected to fail is 'wait $ping_pid', since it's killed by the script. Handle this case with '|| true' to make it play well with 'set -e'. Finally, return the Kselftest SKIP code (4) when the script breaks because of an environment problem or a command line failure. The 0 and 1 return codes should now reliably indicate that all tests have been run (0: all tests run and passed, 1: all tests run but at least one failed, 4: test script didn't run completely). Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting") Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.Guillaume Nault
This selftest currently runs half in the current namespace and half in a netns of its own. Therefore, the test can fail if the current namespace is already configured with incompatible parameters (for example if it already has a veth0 interface). Adapt the script to put both ends of the veth pair in their own netns. Now veth0 is created in NS0 instead of the current namespace, while veth1 is set up in NS1 (instead of the 'testing' netns). The user visible netns names are randomised to minimise the risk of conflicts with already existing namespaces. The cleanup() function doesn't need to remove the virtual interface anymore: deleting NS0 and NS1 automatically removes the virtual interfaces they contained. We can remove $ns, which was only used to run ip commands in the 'testing' netns (let's use the builtin "-netns" option instead). However, we still need a similar functionality as ping and tcpdump now need to run in NS0. So we now have $RUN_NS0 for that. Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting") Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".Guillaume Nault
The ping command can run before DAD completes. In that case, ping may fail and break the selftest. We don't need DAD here since we're working on isolated device pairs. Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10erofs: fix kvcalloc() misuse with __GFP_NOFAILGao Xiang
As reported by syzbot [1], kvcalloc() cannot work with __GFP_NOFAIL. Let's use kcalloc() instead. [1] https://lore.kernel.org/r/0000000000007796bd05f1852ec2@google.com Reported-by: syzbot+c3729cda01706a04fb98@syzkaller.appspotmail.com Fixes: fe3e5914e6dc ("erofs: try to leave (de)compressed_pages on stack if possible") Fixes: 4f05687fd703 ("erofs: introduce struct z_erofs_decompress_backend") Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20230110074927.41651-1-hsiangkao@linux.alibaba.com