summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-06-23OMAP: hwmod: Fix the missing bracesBenoit Cousson
As reported by Sergei, a couple of braces were missing after the WARN removal patch. [07/22] OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed https://patchwork.kernel.org/patch/100756/ Signed-off-by: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: fixed patch description per Anand's E-mail] Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Anand Gadiyar <gadiyar@ti.com>
2010-06-23sched: silence PROVE_RCU in sched_fork()Peter Zijlstra
Because cgroup_fork() is ran before sched_fork() [ from copy_process() ] and the child's pid is not yet visible the child is pinned to its cgroup. Therefore we can silence this warning. A nicer solution would be moving cgroup_fork() to right after dup_task_struct() and exclude PF_STARTING from task_subsys_state(). Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-06-23sky2: enable rx/tx in sky2_phy_reinit()Brandon Philips
sky2_phy_reinit is called by the ethtool helpers sky2_set_settings, sky2_nway_reset and sky2_set_pauseparam when netif_running. However, at the end of sky2_phy_init GM_GP_CTRL has GM_GPCR_RX_ENA and GM_GPCR_TX_ENA cleared. So, doing these commands causes the device to stop working: $ ethtool -r eth0 $ ethtool -A eth0 autoneg off Fix this issue by enabling Rx/Tx after running sky2_phy_init in sky2_phy_reinit. Signed-off-by: Brandon Philips <bphilips@suse.de> Tested-by: Brandon Philips <bphilips@suse.de> Cc: stable@kernel.org Tested-by: Mike McCormack <mikem@ring3k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23MAINTAINERS: change mailing list address for CIFSJeff Layton
We're moving the mailing list to linux-cifs@vger.kernel.org. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-06-23ath9k: Fix bug in starting aniVasanthakumar Thiagarajan
There are few places where ANI is started without checking if it is right to start. This might lead to a case where ani timer would be left undeleted and cause improper memory acccess during module unload. This bug is clearly exposed with paprd support where the driver detects tx hang and does a chip reset. During this reset ani is (re)started without checking if it needs to be started. This would leave a timer scheduled even after all the resources are freed and cause a panic. This patch introduces a bit in sc_flags to indicate if ani needs to be started in sw_scan_start() and ath_reset(). This would fix the following panic. This issue is easily seen with ar9003 + paprd. BUG: unable to handle kernel paging request at 0000000000003f38 [<ffffffff81075391>] ? __queue_work+0x41/0x50 [<ffffffff8106afaa>] run_timer_softirq+0x17a/0x370 [<ffffffff81088be8>] ? tick_dev_program_event+0x48/0x110 [<ffffffff81061f69>] __do_softirq+0xb9/0x1f0 [<ffffffff810ba060>] ? handle_IRQ_event+0x50/0x160 [<ffffffff8100af5c>] call_softirq+0x1c/0x30 [<ffffffff8100c9f5>] do_softirq+0x65/0xa0 [<ffffffff81061e25>] irq_exit+0x85/0x90 [<ffffffff8155e095>] do_IRQ+0x75/0xf0 [<ffffffff815570d3>] ret_from_intr+0x0/0x11 <EOI> [<ffffffff812fd67b>] ? acpi_idle_enter_simple+0xe4/0x119 [<ffffffff812fd674>] ? acpi_idle_enter_simple+0xdd/0x119 [<ffffffff81441c87>] cpuidle_idle_call+0xa7/0x140 [<ffffffff81008da3>] cpu_idle+0xb3/0x110 [<ffffffff81550722>] start_secondary+0x1ee/0x1f5 Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-23cnic: Disable statistics initialization for eth clients that do not support ↵Dmitry Kravkov
statistics Disable statistics initialization for eth clients that do not support statistics. This prevents memory corruption on bnx2x hw. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
2010-06-23net: add dependency on fw class module to qlcnic and netxen_nicAnirban Chakraborty
netxen_nic and qlcnic driver depends on firmware_class module. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23snmp: fix SNMP_ADD_STATS()Eric Dumazet
commit aa2ea0586d9d (tcp: fix outsegs stat for TSO segments) incorrectly assumed SNMP_ADD_STATS() was used from BH context. Fix this using mib[!in_softirq()] instead of mib[0] Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23sparc64: Fix maybe_change_configuration() PCR setting.David S. Miller
Need to mask out the existing event bits before OR'ing in the new ones. Noticed by Peter Zijlstra. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23ALSA: usb-audio - Add volume resolution quirk for some Logitech webcamsAlexey Fisher
Some programs like Skype trying to set capture volume automatically. Normally it will tray, carefully step by step lover or higher, set the volume. In real word it work not really well, because devises and vendors lie about real audio settings. For example most Logitech webcams have 6400 or 3500 steps for capture volume. They do not tell that actual resolution is 384. So we have only 7 or 18 real steps. In this patch I set real resolution only for tested devices. Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-23idr: fix RCU lockdep splat in idr_get_next()Paul E. McKenney
Convert to rcu_dereference_raw() given that many callers may have many different locking models. Located-by: Miles Lane <miles.lane@gmail.com> Tested-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-06-23rcu: apply RCU protection to wake_affine()Daniel J Blueman
The task_group() function returns a pointer that must be protected by either RCU, the ->alloc_lock, or the cgroup lock (see the rcu_dereference_check() in task_subsys_state(), which is invoked by task_group()). The wake_affine() function currently does none of these, which means that a concurrent update would be within its rights to free the structure returned by task_group(). Because wake_affine() uses this structure only to compute load-balancing heuristics, there is no reason to acquire either of the two locks. Therefore, this commit introduces an RCU read-side critical section that starts before the first call to task_group() and ends after the last use of the "tg" pointer returned from task_group(). Thanks to Li Zefan for pointing out the need to extend the RCU read-side critical section from that proposed by the original patch. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-06-23virtio-pci: disable msi at startupMichael S. Tsirkin
virtio-pci resets the device at startup by writing to the status register, but this does not clear the pci config space, specifically msi enable status which affects register layout. This breaks things like kdump when they try to use e.g. virtio-blk. Fix by forcing msi off at startup. Since pci.c already has a routine to do this, we export and use it instead of duplicating code. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: linux-pci@vger.kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org
2010-06-23virtio: return ENOMEM on out of memoryMichael S. Tsirkin
add_buf returns ring size on out of memory, this is not what devices expect. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org # .34.x
2010-06-23crypto: skcipher - avoid NULL dereferenceJiri Slaby
Stanse found a potential NULL dereference in ablkcipher_next_slow. Even though kmalloc fails, its retval is dereferenced later. Return from that function properly earlier. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-06-23xfs: always use iget in bulkstatChristoph Hellwig
The non-coherent bulkstat versionsthat look directly at the inode buffers causes various problems with performance optimizations that make increased use of just logging inodes. This patch makes bulkstat always use iget, which should be fast enough for normal use with the radix-tree based inode cache introduced a while ago. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-06-24xfs: prevent swapext from operating on write-only filesDan Rosenberg
This patch prevents user "foo" from using the SWAPEXT ioctl to swap a write-only file owned by user "bar" into a file owned by "foo" and subsequently reading it. It does so by checking that the file descriptors passed to the ioctl are also opened for reading. Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-06-22Input: wacom - fix serial number handling on Cintiq 21UX2Ping Cheng
Cintiq 21UX2 added 8 more bits for the tool serial number and more buttons for the expresskey. We did not enable them properly in the last patch. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-22Input: fixup X86_MRST selectsRandy Dunlap
Some of the recent X86_MRST additions make some "select"s conditional on X86_MRST but missed some related kconfig symbols, causing: drivers/built-in.o: In function `ps2_end_command': (.text+0x257ab2): undefined reference to `i8042_check_port_owner' drivers/built-in.o: In function `ps2_end_command': (.text+0x257ae1): undefined reference to `i8042_unlock_chip' drivers/built-in.o: In function `ps2_begin_command': (.text+0x257b40): undefined reference to `i8042_check_port_owner' drivers/built-in.o: In function `ps2_begin_command': (.text+0x257b6f): undefined reference to `i8042_lock_chip' when SERIO_I8042=m, SERIO_LIBPS2=y, KEYBOARD_ATKBD=y. We need to make i8042 dependant upon !X86_MRST and allow deselecting atkbd on Moorestown even when !CONFIG_EMBEDDED. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-22Merge commit 'v2.6.35-rc3' into for-linusDmitry Torokhov
2010-06-22Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-06-22NFSv4: Fix an embarassing typo in encode_attrs()Trond Myklebust
Apparently, we have never been able to set the atime correctly from the NFSv4 client. Reported-by: 小倉一夫 <ka-ogura@bd6.so-net.ne.jp> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
2010-06-22NFSv4: Ensure that /proc/self/mountinfo displays the minor version numberTrond Myklebust
Currently, we do not display the minor version mount parameter in the /proc mount info. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
2010-06-22NFSv4.1: Ensure that we initialise the session when following a referralTrond Myklebust
Put the code that is common to both the referral and ordinary mount cases into a common helper routine. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-06-22SUNRPC: Fix a re-entrancy bug in xs_tcp_read_calldir()Trond Myklebust
If the attempt to read the calldir fails, then instead of storing the read bytes, we currently discard them. This leads to a garbage final result when upon re-entry to the same routine, we read the remaining bytes. Fixes the regression in bugzilla number 16213. Please see https://bugzilla.kernel.org/show_bug.cgi?id=16213 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
2010-06-22nfs4 use mandatory attribute file type in nfs4_get_rootAndy Adamson
S_ISDIR(fsinfo.fattr->mode) checks the file type rather than the mode bits, so we should be checking for the NFS_ATTR_FATTR_TYPE fattr property. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
2010-06-22hso: remove setting of low_latency flagFilip Aben
This patch removes the setting of the low_latency flag. tty_flip_buffer_push() is occasionally being called in irq context, which causes a hang if the low_latency flag is set. Removing the low_latency flag only seems to impact the flush to ldisc, which will now be put on a workqueue. Signed-off-by: Filip Aben <f.aben@option.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-22ALSA: hda - Add Macbook 5,2 quirkLuke Yelavich
BugLink: https://bugs.launchpad.net/bugs/463178 Set Macbook 5,2 (106b:4a00) hardware to use ALC885_MB5 Cc: <stable@kernel.org> Signed-off-by: Luke Yelavich <luke.yelavich@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-22ALSA: hda - Fix uninitialized variableTakashi Iwai
Fix the following compile warning. kctl should be NULL-initialized. sound/pci/hda/patch_realtek.c: In function ‘alc_build_controls’: sound/pci/hda/patch_realtek.c:2550:23: warning: ‘kctl’ may be used uninitialized in this function Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-22clocksource: sh_cmt: Fix up bogus shift value.Paul Mundt
The previous CMT fixup accidentally copied in the TMU shift value, reset this back to its original value while preserving the TMU fix. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-21ceph: delay umount until all mds requests drop inode+dentry refsSage Weil
This fixes a race between handle_reply finishing an mds request, signalling completion, and then dropping the request structing and its dentry+inode refs, and pre_umount function waiting for requests to finish before letting the vfs tear down the dcache. If umount was delayed waiting for mds requests, we could race and BUG in shrink_dcache_for_umount_subtree because of a slow dput. This delays umount until the msgr queue flushes, which means handle_reply will exit and will have dropped the ceph_mds_request struct. I'm assuming the VFS has already ensured that its calls have all completed and those request refs have thus been dropped as well (I haven't seen that race, at least). Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-21ceph: handle splice_dentry/d_materialize_unique error in readdir_prepopulateSage Weil
Handle a splice_dentry failure (due to a d_materialize_unique error) without crashing. (Also, report the error code.) Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-21udp: Fix bogus UFO packet generationHerbert Xu
It has been reported that the new UFO software fallback path fails under certain conditions with NFS. I tracked the problem down to the generation of UFO packets that are smaller than the MTU. The software fallback path simply discards these packets. This patch fixes the problem by not generating such packets on the UFO path. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-21lasi82596: fix netdev_mc_count conversionHelge Deller
Fix commit 4cd24eaf0 (net: use netdev_mc_count and netdev_mc_empty when appropriate) Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-21NET: MIPSsim: Fix modpost warning.Ralf Baechle
$ make CONFIG_DEBUG_SECTION_MISMATCH=y [...] WARNING: drivers/net/built-in.o(.data+0x0): Section mismatch in reference from the variable mipsnet_driver to the function .init.text:mipsnet_probe() The variable mipsnet_driver references the function __init mipsnet_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, [...] Fixed by making mipsnet_probe __devinit. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/mipsnet.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-21tracing: Fix undeclared ENOSYS in include/linux/tracepoint.hWu Zhangjin
The header file include/linux/tracepoint.h may be included without include/linux/errno.h and then the compiler will fail on building for undelcared ENOSYS. This patch fixes this problem via including <linux/errno.h> to include/linux/tracepoint.h. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> LKML-Reference: <1277118549-622-1-git-send-email-wuzhangjin@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-21ds2782_battery: Fix ds2782_get_capacity return valueRyan Mallon
The ds2782_get_capacity function should return 0 on success, not the capacity value. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-06-21Merge branch 'fix/misc' into for-linusTakashi Iwai
2010-06-21ALSA: usb/endpoint, fix dangling pointer useJiri Slaby
Stanse found that in snd_usb_parse_audio_endpoints, there is a dangling pointer dereference. When snd_usb_parse_audio_format fails, fp is freed, and continue invoked. On the next loop, there is "fp && fp->altsetting == 1 && fp->channels == 1" test, but fp is set from the last iteration (but is bogus) and thus ilegally dereferenced. Set fp to NULL before "continue". Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-21HID: eliminate a double lock in debug codeJulia Lawall
The path around the loop ends with the lock held, so the call to mutex_lock is moved before the beginning of the loop. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @locked@ expression E1; position p; @@ read_lock(E1@p,...); @r exists@ expression x <= locked.E1; expression locked.E1; expression E2; identifier lock; position locked.p,p1,p2; @@ *lock@p1 (E1@p,...); ... when != E1 when != \(x = E2\|&x\) *lock@p2 (E1,...); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-21HID: ntrig: add support for new firwmare versionsmicki
Signed-off-by: Micki Balanga <micki@n-trig.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-21cfq: fix recursive call in cfq_blkiocg_update_completion_stats()Jens Axboe
e98ef89b has a typo, causing cfq_blkiocg_update_completion_stats() to call itself instead of blkiocg_update_completion_stats(). Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-21arch/sh/mm: Eliminate a double lockJulia Lawall
The function begins and ends with a read_lock. The latter is changed to a read_unlock. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @locked@ expression E1; position p; @@ read_lock(E1@p,...); @r exists@ expression x <= locked.E1; expression locked.E1; expression E2; identifier lock; position locked.p,p1,p2; @@ *lock@p1 (E1@p,...); ... when != E1 when != \(x = E2\|&x\) *lock@p2 (E1,...); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-20Merge branch 'fix/misc' into for-linusTakashi Iwai
2010-06-20Merge branch 'fix/asoc' into for-linusTakashi Iwai
2010-06-20x86: Fix rebooting on Dell Precision WorkStation T7400Thomas Backlund
Dell Precision WorkStation T7400 freezes on reboot unless reboot=b is used. Reference: https://qa.mandriva.com/show_bug.cgi?id=58017 Signed-off-by: Thomas Backlund <tmb@mandriva.org> LKML-Reference: <4C1CC6E9.6000701@mandriva.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-20hwmon: (k8temp) Bypass core swapping on single-core processorsJean Delvare
Commit a2e066bba2aad6583e3ff648bf28339d6c9f0898 introduced core swapping for CPU models 64 and later. I recently had a report about a Sempron 3200+, model 95, for which this patch broke temperature reading. It happens that this is a single-core processor, so the effect of the swapping was to read a temperature value for a core that didn't exist, leading to an incorrect value (-49 degrees C.) Disabling core swapping on singe-core processors should fix this. Additional comment from Andreas: The BKDG says Thermal Sensor Core Select (ThermSenseCoreSel)-Bit 2. This bit selects the CPU whose temperature is reported in the CurTemp field. This bit only applies to dual core processors. For single core processors CPU0 Thermal Sensor is always selected. k8temp_probe() correctly detected that SEL_CORE can't be used on single core CPU. Thus k8temp did never update the temperature values stored in temp[1][x] and -49 degrees was reported. For single core CPUs we must use the values read into temp[0][x]. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Rick Moritz <rhavin@gmx.net> Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: stable@kernel.org
2010-06-20hwmon: (i5k_amb) Fix sysfs attribute for lockdepKAMEZAWA Hiroyuki
i5k_amb.ko uses dynamically allocated memory (by kmalloc) for attributes passed to sysfs. So, sysfs_attr_init() should be called for working happy with lockdep. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org [2.6.34 only]
2010-06-20hwmon: (k10temp) Do not blacklist known working CPU modelsJean Delvare
When detecting AM2+ or AM3 socket with DDR2, only blacklist cores which are known to exist in AM2+ format. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Clemens Ladisch <clemens@ladisch.de> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: stable@kernel.org
2010-06-18drm/i915: gen3 page flipping fixesJesse Barnes
Gen3 chips have slightly different flip commands, and also contain a bit that indicates whether a "flip pending" interrupt means the flip has been queued or has been completed. So implement support for the gen3 flip command, and make sure we use the flip pending interrupt correctly depending on the value of ECOSKPD bit 0. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
generated by cgit (git 2.34.1) at 2025-09-13 09:42:00 +0000