| Age | Commit message (Collapse) | Author |
|---|
|
Since the driver works in the "legacy" addressing mode, we need to write
to the expansion register (0x17) with bits 11:8 set to 0xf to properly
select the expansion register passed as argument.
Fixes: f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230508231749.1681169-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KCSAN found a data race in sock_recv_cmsgs() where the read access
to sk->sk_stamp needs READ_ONCE().
BUG: KCSAN: data-race in packet_recvmsg / packet_recvmsg
write (marked) to 0xffff88803c81f258 of 8 bytes by task 19171 on cpu 0:
sock_write_timestamp include/net/sock.h:2670 [inline]
sock_recv_cmsgs include/net/sock.h:2722 [inline]
packet_recvmsg+0xb97/0xd00 net/packet/af_packet.c:3489
sock_recvmsg_nosec net/socket.c:1019 [inline]
sock_recvmsg+0x11a/0x130 net/socket.c:1040
sock_read_iter+0x176/0x220 net/socket.c:1118
call_read_iter include/linux/fs.h:1845 [inline]
new_sync_read fs/read_write.c:389 [inline]
vfs_read+0x5e0/0x630 fs/read_write.c:470
ksys_read+0x163/0x1a0 fs/read_write.c:613
__do_sys_read fs/read_write.c:623 [inline]
__se_sys_read fs/read_write.c:621 [inline]
__x64_sys_read+0x41/0x50 fs/read_write.c:621
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
read to 0xffff88803c81f258 of 8 bytes by task 19183 on cpu 1:
sock_recv_cmsgs include/net/sock.h:2721 [inline]
packet_recvmsg+0xb64/0xd00 net/packet/af_packet.c:3489
sock_recvmsg_nosec net/socket.c:1019 [inline]
sock_recvmsg+0x11a/0x130 net/socket.c:1040
sock_read_iter+0x176/0x220 net/socket.c:1118
call_read_iter include/linux/fs.h:1845 [inline]
new_sync_read fs/read_write.c:389 [inline]
vfs_read+0x5e0/0x630 fs/read_write.c:470
ksys_read+0x163/0x1a0 fs/read_write.c:613
__do_sys_read fs/read_write.c:623 [inline]
__se_sys_read fs/read_write.c:621 [inline]
__x64_sys_read+0x41/0x50 fs/read_write.c:621
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
value changed: 0xffffffffc4653600 -> 0x0000000000000000
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 19183 Comm: syz-executor.5 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Fixes: 6c7c98bad488 ("sock: avoid dirtying sk_stamp, if possible")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230508175543.55756-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Initialize MAC_ONEUS_TIC_COUNTER register with correct value derived
from CSR clock, otherwise EEE is unstable on at least NXP i.MX8M Plus
and Micrel KSZ9131RNX PHY, to the point where not even ARP request can
be sent out.
i.MX 8M Plus Applications Processor Reference Manual, Rev. 1, 06/2021
11.7.6.1.34 One-microsecond Reference Timer (MAC_ONEUS_TIC_COUNTER)
defines this register as:
"
This register controls the generation of the Reference time (1 microsecond
tic) for all the LPI timers. This timer has to be programmed by the software
initially.
...
The application must program this counter so that the number of clock cycles
of CSR clock is 1us. (Subtract 1 from the value before programming).
For example if the CSR clock is 100MHz then this field needs to be programmed
to value 100 - 1 = 99 (which is 0x63).
This is required to generate the 1US events that are used to update some of
the EEE related counters.
"
The reset value is 0x63 on i.MX8M Plus, which means expected CSR clock are
100 MHz. However, the i.MX8M Plus "enet_qos_root_clk" are 266 MHz instead,
which means the LPI timers reach their count much sooner on this platform.
This is visible using a scope by monitoring e.g. exit from LPI mode on TX_CTL
line from MAC to PHY. This should take 30us per STMMAC_DEFAULT_TWT_LS setting,
during which the TX_CTL line transitions from tristate to low, and 30 us later
from low to high. On i.MX8M Plus, this transition takes 11 us, which matches
the 30us * 100/266 formula for misconfigured MAC_ONEUS_TIC_COUNTER register.
Configure MAC_ONEUS_TIC_COUNTER based on CSR clock, so that the LPI timers
have correct 1us reference. This then fixes EEE on i.MX8M Plus with Micrel
KSZ9131RNX PHY.
Fixes: 477286b53f55 ("stmmac: add GMAC4 core support")
Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Harald Seiler <hws@denx.de>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Verdin iMX8MP
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20230506235845.246105-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kernel/pi gives rise to a lot of new sections that end up orphans: the
first attempt to fix that tried to enumerate them all in the linker
script, but kernel test robot with a random config keeps finding more of
them.
So prefix all those sections with .init.pi instead of only .init in
order to be able to easily catch them all in the linker script.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304301606.Cgp113Ha-lkp@intel.com/
Fixes: 26e7aacb83df ("riscv: Allow to downgrade paging mode from the command line")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230504120759.18730-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When using the logical to ino ioctl v2, if the flag to ignore offsets of
file extent items (BTRFS_LOGICAL_INO_ARGS_IGNORE_OFFSET) is given, the
backref walking code ends up not returning references for all file offsets
of an inode that point to the given logical bytenr. This happens since
kernel 6.2, commit 6ce6ba534418 ("btrfs: use a single argument for extent
offset in backref walking functions") because:
1) It mistakenly skipped the search for file extent items in a leaf that
point to the target extent if that flag is given. Instead it should
only skip the filtering done by check_extent_in_eb() - that is, it
should not avoid the calls to that function (or find_extent_in_eb(),
which uses it).
2) It was also not building a list of inode extent elements (struct
extent_inode_elem) if we have multiple inode references for an extent
when the ignore offset flag is given to the logical to ino ioctl - it
would leave a single element, only the last one that was found.
These stem from the confusing old interface for backref walking functions
where we had an extent item offset argument that was a pointer to a u64
and another boolean argument that indicated if the offset should be
ignored, but the pointer could be NULL. That NULL case is used by
relocation, qgroup extent accounting and fiemap, simply to avoid building
the inode extent list for each reference, as it's not necessary for those
use cases and therefore avoids memory allocations and some computations.
Fix this by adding a boolean argument to the backref walk context
structure to indicate that the inode extent list should not be built,
make relocation set that argument to true and fix the backref walking
logic to skip the calls to check_extent_in_eb() and find_extent_in_eb()
only if this new argument is true, instead of 'ignore_extent_item_pos'
being true.
A test case for fstests will be added soon, to provide cover not only
for these cases but to the logical to ino ioctl in general as well, as
currently we do not have a test case for it.
Reported-by: Vladimir Panteleev <git@vladimir.panteleev.md>
Link: https://lore.kernel.org/linux-btrfs/CAHhfkvwo=nmzrJSqZ2qMfF-rZB-ab6ahHnCD_sq9h4o8v+M7QQ@mail.gmail.com/
Fixes: 6ce6ba534418 ("btrfs: use a single argument for extent offset in backref walking functions")
CC: stable@vger.kernel.org # 6.2+
Tested-by: Vladimir Panteleev <git@vladimir.panteleev.md>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When loading a free space cache from disk, at __load_free_space_cache(),
if we fail to insert a bitmap entry, we still increment the number of
total bitmaps in the btrfs_free_space_ctl structure, which is incorrect
since we failed to add the bitmap entry. On error we then empty the
cache by calling __btrfs_remove_free_space_cache(), which will result
in getting the total bitmaps counter set to 1.
A failure to load a free space cache is not critical, so if a failure
happens we just rebuild the cache by scanning the extent tree, which
happens at block-group.c:caching_thread(). Yet the failure will result
in having the total bitmaps of the btrfs_free_space_ctl always bigger
by 1 then the number of bitmap entries we have. So fix this by having
the total bitmaps counter be incremented only if we successfully added
the bitmap entry.
Fixes: a67509c30079 ("Btrfs: add a io_ctl struct and helpers for dealing with the space cache")
Reviewed-by: Anand Jain <anand.jain@oracle.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Check nodesize to sectorsize in alignment check in print_extent_item.
The comment states that and this is correct, similar check is done
elsewhere in the functions.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: ea57788eb76d ("btrfs: require only sector size alignment for parent eb bytenr")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Dan has been improving on the smatch error pointer checks, and pointed
at another case where the __filemap_get_folio() conversion to error
pointers had been overlooked. This time because it was hidden behind
the filemap_grab_folio() helper function that is a wrapper around it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix backward leaf iteration which could possibly return the same key
- fix assertion when device add and balance race for exclusive
operation
- fix regression when freeing device, state tree would leak after
device replace
- fix attempt to clear space cache v1 when block-group-tree is enabled
- fix potential i_size corruption when encoded write races with send v2
and enabled no-holes (the race is hard to hit though, the window is a
few instructions wide)
- fix wrong bitmap API use when checking empty zones, parameters were
swapped but not causing a bug due to other code
- prevent potential qgroup leak if subvolume create does not commit
transaction (which is pending in the development queue)
- error handling and reporting:
- abort transaction when sibling keys check fails for leaves
- print extent buffers when sibling keys check fails
* tag 'for-6.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't free qgroup space unless specified
btrfs: fix encoded write i_size corruption with no-holes
btrfs: zoned: fix wrong use of bitops API in btrfs_ensure_empty_zones
btrfs: properly reject clear_cache and v1 cache for block-group-tree
btrfs: print extent buffers when sibling keys check fails
btrfs: abort transaction when sibling keys check fails for leaves
btrfs: fix leak of source device allocation state after device replace
btrfs: fix assertion of exclop condition when starting balance
btrfs: fix btrfs_prev_leaf() to not return the same key twice
|
|
xfstests generic/392 showed a problem where even after a
shutdown call was made on a mount, we would still attempt
to use the (now inaccessible) superblock if another mount
was attempted for the same share.
Reported-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: 087f757b0129 ("cifs: add shutdown support")
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In investigating a failure with xfstest generic/392 it
was noticed that mounts were reusing a superblock that should
already have been freed. This turned out to be related to
deferred close files keeping a reference count until the
closetimeo expired.
Currently the only way an fs knows that mount is beginning is
when force unmount is called, but when this, ie umount_begin(),
is called all deferred close files on the share (tree
connection) should be closed immediately (unless shared by
another mount) to avoid using excess resources on the server
and to avoid reusing a superblock which should already be freed.
In umount_begin, close all deferred close handles for that
share if this is the last mount using that share on this
client (ie send the SMB3 close request over the wire for those
that have been already closed by the app but that we have
kept a handle lease open for and have not sent closes to the
server for yet).
Reported-by: David Howells <dhowells@redhat.com>
Acked-by: Bharath SM <bharathsm@microsoft.com>
Cc: <stable@vger.kernel.org>
Fixes: 78c09634f7dc ("Cifs: Fix kernel oops caused by deferred close for files.")
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If CONFIG_IO_URING isn't set, then io_uring_sqe_cmd() is not defined.
As the nvme driver uses this helper, it causes a compilation issue:
drivers/nvme/host/ioctl.c: In function 'nvme_uring_cmd_io':
drivers/nvme/host/ioctl.c:555:44: error: implicit declaration of function 'io_uring_sqe_cmd'; did you mean 'io_uring_free'? [-Werror=implicit-function-declaration]
555 | const struct nvme_uring_cmd *cmd = io_uring_sqe_cmd(ioucmd->sqe);
| ^~~~~~~~~~~~~~~~
| io_uring_free
Fix it by just making io_uring_sqe_cmd() generally available - the types
are known, and there's no reason to hide it under CONFIG_IO_URING.
Fixes: fd9b8547bc5c ("io_uring: Pass whole sqe to commands")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Start the 6.5 release cycle.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
I've been contributing to VKMS with improvements, reviews, testing and
debugging. Therefore, add myself as a co-maintainer of the VKMS driver.
Acked-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230508141038.327160-1-mairacanal@riseup.net
|
|
Include reboot.h in machine_kexec.c for declaration of
machine_crash_shutdown and machine_shutdown.
gcc-12 with W=1 reports:
arch/parisc/kernel/kexec.c:57:6: warning: no previous prototype for 'machine_crash_shutdown' [-Wmissing-prototypes]
57 | void machine_crash_shutdown(struct pt_regs *regs)
| ^~~~~~~~~~~~~~~~~~~~~~
arch/parisc/kernel/kexec.c:61:6: warning: no previous prototype for 'machine_shutdown' [-Wmissing-prototypes]
61 | void machine_shutdown(void)
| ^~~~~~~~~~~~~~~~
No functional changes intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
This commit adds memory barrier for the 'vq' update in function
mlxbf_tmfifo_virtio_find_vqs() to avoid potential race due to
out-of-order memory write. It also adds barrier for the 'is_ready'
flag to make sure the initializations are visible before this flag
is checked.
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/b98c0ab61d644ba38fa9b3fd1607b138b0dd820b.1682518748.git.limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add return value for dim_calc_stats. This is an indication for the
caller if curr_stats was assigned by the function. Avoid using
curr_stats uninitialized over {rdma/net}_dim, when no time delta between
samples. Coverity reported this potential use of an uninitialized
variable.
Fixes: 4c4dbb4a7363 ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux")
Fixes: cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/20230507135743.138993-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add documentation for the DRM_MODE_TV_MODE_MAX enumerator to fix the
kernel-doc warning:
include/drm/drm_connector.h:204: warning: Enum value 'DRM_MODE_TV_MODE_MAX' not described in enum 'drm_connector_tv_mode'
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504123444.1843795-1-jani.nikula@intel.com
|
|
Add touchscreen info for the Dexp Ursus KX210i
Signed-off-by: Andrey Avdeev <jamesstoun@gmail.com>
Link: https://lore.kernel.org/r/ZE4gRgzRQCjXFYD0@avdeevavpc
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Juno Tablet
The Juno Computers Juno Tablet has an upside-down mounted Goodix
touchscreen. Add a quirk to invert both axis to correct for this.
Link: https://junocomputers.com/us/product/juno-tablet/
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230505210323.43177-1-hdegoede@redhat.com
|
|
There has been a lot of confusion around which platform profiles are
supported on various platforms and it would be useful to have a debug
method to be able to override the profile mode that is selected.
I don't expect this to be used in anything other than debugging in
conjunction with Lenovo engineers - but it does give a way to get a
system working whilst we wait for either FW fixes, or a driver fix
to land upstream, if something is wonky in the mode detection logic
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230505132523.214338-2-mpearson-lenovo@squebb.ca
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
I had incorrectly thought that PSC profiles were not usable on Intel
platforms so had blocked them in the driver initialistion. This broke
platform profiles on the T490.
After discussion with the FW team PSC does work on Intel platforms and
should be allowed.
Note - it's possible this may impact other platforms where it is advertised
but special driver support that only Windows has is needed. But if it does
then they will need fixing via quirks. Please report any issues to me so I
can get them addressed - but I haven't found any problems in testing...yet
Fixes: bce6243f767f ("platform/x86: thinkpad_acpi: do not use PSC mode on Intel platforms")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2177962
Cc: stable@vger.kernel.org
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230505132523.214338-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fixes micmute key of HP Envy X360 ey0xxx.
Signed-off-by: Fae <faenkhauser@gmail.com>
Link: https://lore.kernel.org/r/20230425063644.11828-1-faenkhauser@gmail.com
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Currently when the uncore_write() returns error, it is silently
ignored. Return error to user space when uncore_write() fails.
Fixes: 49a474c7ba51 ("platform/x86: Add support for Uncore frequency control")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230418153230.679094-1-srinivas.pandruvada@linux.intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
assigned-clocks are a dependency of clocks, however the dtschema has
limitation and expects clocks to be present in the binding using
assigned-clocks, not in other referenced bindings. The clocks were
defined in common fsl,imx6q-pcie-common.yaml, which is referenced by
fsl,imx6q-pcie-ep.yaml. The fsl,imx6q-pcie-ep.yaml used assigned-clocks
thus leading to warnings:
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.example.dtb: pcie-ep@33800000:
Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
From schema: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
Fix this by moving clocks to each specific schema from the common one
and narrowing them to strictly match what is expected for given device.
Fixes: b10f82380eeb ("dt-bindings: imx6q-pcie: Restruct i.MX PCIe schema")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/20230508071837.68552-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
rasize (ra_pages) should be set higher than read size by default
to allow parallel reads when reading large files in order to
improve performance (otherwise there is much dead time on the
network when doing readahead of large files). Default rasize
to twice readsize.
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When a tick broadcast clockevent device is initialized for one shot mode
then tick_broadcast_setup_oneshot() OR's the periodic broadcast mode
cpumask into the oneshot broadcast cpumask.
This is required when switching from periodic broadcast mode to oneshot
broadcast mode to ensure that CPUs which are waiting for periodic
broadcast are woken up on the next tick.
But it is subtly broken, when an active broadcast device is replaced and
the system is already in oneshot (NOHZ/HIGHRES) mode. Victor observed
this and debugged the issue.
Then the OR of the periodic broadcast CPU mask is wrong as the periodic
cpumask bits are sticky after tick_broadcast_enable() set it for a CPU
unless explicitly cleared via tick_broadcast_disable().
That means that this sets all other CPUs which have tick broadcasting
enabled at that point unconditionally in the oneshot broadcast mask.
If the affected CPUs were already idle and had their bits set in the
oneshot broadcast mask then this does no harm. But for non idle CPUs
which were not set this corrupts their state.
On their next invocation of tick_broadcast_enable() they observe the bit
set, which indicates that the broadcast for the CPU is already set up.
As a consequence they fail to update the broadcast event even if their
earliest expiring timer is before the actually programmed broadcast
event.
If the programmed broadcast event is far in the future, then this can
cause stalls or trigger the hung task detector.
Avoid this by telling tick_broadcast_setup_oneshot() explicitly whether
this is the initial switch over from periodic to oneshot broadcast which
must take the periodic broadcast mask into account. In the case of
initialization of a replacement device this prevents that the broadcast
oneshot mask is modified.
There is a second problem with broadcast device replacement in this
function. The broadcast device is only armed when the previous state of
the device was periodic.
That is correct for the switch from periodic broadcast mode to oneshot
broadcast mode as the underlying broadcast device could operate in
oneshot state already due to lack of periodic state in hardware. In that
case it is already armed to expire at the next tick.
For the replacement case this is wrong as the device is in shutdown
state. That means that any already pending broadcast event will not be
armed.
This went unnoticed because any CPU which goes idle will observe that
the broadcast device has an expiry time of KTIME_MAX and therefore any
CPUs next timer event will be earlier and cause a reprogramming of the
broadcast device. But that does not guarantee that the events of the
CPUs which were already in idle are delivered on time.
Fix this by arming the newly installed device for an immediate event
which will reevaluate the per CPU expiry times and reprogram the
broadcast device accordingly. This is simpler than caching the last
expiry time in yet another place or saving it before the device exchange
and handing it down to the setup function. Replacement of broadcast
devices is not a frequent operation and usually happens once somewhere
late in the boot process.
Fixes: 9c336c9935cf ("tick/broadcast: Allow late registered device to enter oneshot mode")
Reported-by: Victor Hassan <victor@allwinnertech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/87pm7d2z1i.ffs@tglx
|
|
Fixes the right lineage number for the workaround.
Fixes: a7fa1537b791 ("drm/i915/mtl: Implement Wa_14019141245")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230505234544.4029535-1-radhakrishna.sripada@intel.com
|
|
"SHAREFLAG_ISOLATED_TRANSPORT" indicates that we should not reuse the socket
for this share (for future mounts). Mark the socket as server->nosharesock if
share flags returned include SHAREFLAG_ISOLATED_TRANSPORT.
See MS-SMB2 MS-SMB2 2.2.10 and 3.2.5.5
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Change type of pcchunk->Length from u32 to u64 to match
smb2_copychunk_range arguments type. Fixes the problem where performing
server-side copy with CIFS_IOC_COPYCHUNK_FILE ioctl resulted in incomplete
copy of large files while returning -EINVAL.
Fixes: 9bf0c9cd4314 ("CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large files")
Cc: <stable@vger.kernel.org>
Signed-off-by: Pawel Witek <pawel.ireneusz.witek@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The #if check is wrong, leading to a build failure:
drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c: In function 'mxc_isi_channel_set_inbuf':
drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:33:5: error: "CONFIG_ARCH_DMA_ADDR_T_64BIT" is not defined, evaluates to 0 [-Werror=undef]
33 | #if CONFIG_ARCH_DMA_ADDR_T_64BIT
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
This could just be an #ifdef, but it seems nicer to just remove the
check entirely. Apparently the only reason for the #ifdef is to avoid
another warning:
drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:55:24: error: right shift count >= width of type [-Werror=shift-count-overflow]
But this is best avoided by using the lower_32_bits()/upper_32_bits()
helpers.
Fixes: cf21f328fcaf ("media: nxp: Add i.MX8 ISI driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
added documentation to drm_dev_unregister clarifying that devres managed
devices allocated with devm_drm_dev_alloc do not require calls to
drm_dev_put.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Brandon Pollack <brpol@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230425080240.3582324-1-brpol@chromium.org
|
|
This id was removed in commit b47018a778c1 ("platform/x86: intel_scu_ipc:
Remove Lincroft support"), saying it is only used on Moorestown,
but apparently the same id is also used on Medfield.
Tested on the Medfield based Motorola RAZR i smartphone.
Signed-off-by: Julian Winkler <julian.winkler1@web.de>
Link: https://lore.kernel.org/r/20230416154932.6579-1-julian.winkler1@web.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Implement DRM fbdev helpers for reading and writing framebuffer
memory with the respective fbdev functions. Removes duplicate
code.
v2:
* rename fb_cfb_() to fb_io_() (Geert)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-20-tzimmermann@suse.de
|
|
Move the existing I/O read and write code for I/O memory into
the new helpers fb_cfb_read() and fb_cfb_write(). Make them the
default fp_ops. No functional changes.
In the near term, the new functions will be useful to the DRM
subsystem, which currently provides it's own implementation. It
can then use the shared code. In the longer term, it might make
sense to revise the I/O helper's default status and make them
opt-in by the driver. Systems that don't use them would not
contain the code any longer.
v2:
* add detailed commit message (Javier)
* rename fb_cfb_() to fb_io_() (Geert)
* add fixes that got lost while moving the code (Geert)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-19-tzimmermann@suse.de
|
|
Push the test for info->screen_base from fb_read() and fb_write() into
the implementations of struct fb_ops.{fb_read,fb_write}. In cases where
the driver operates on info->screen_buffer, test this field instead.
While bothi fields, screen_base and screen_buffer, are stored in the
same location, they refer to different address spaces. For correctness,
we want to test each field in exactly the code that uses it.
v2:
* also test screen_base in pvr2fb (Geert)
* also test screen_buffer in ivtvfb, arcfb, broadsheetfb,
hecubafb, metronomefb and ssd1307fb (Geert)
* give a rational for the change (Geert)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-18-tzimmermann@suse.de
|
|
The file-op entry points fb_read() and fb_write() verify that
info->state has been set to FBINFO_STATE_RUNNING. Remove the same
test from the implementations of struct fb_ops.{fb_read,fb_write}.
v2:
* also remove test from ivtvfb, braodsheetfb, hecubafb and
metronomefb (Geert)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-17-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
Since the fb_sys_{read,write}() functions operate on the latter address
space, it is wrong to use .screen_base and .screen_buffer must be used
instead. This also gets rid of all the casting needed due to not using
the correct data type.
v2:
* add detailed commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-16-tzimmermann@suse.de
|
|
Always return the number of bytes read or written within the
framebuffer. Only return an errno code if framebuffer memory
was not touched. This is the semantics required by POSIX and
makes fb_read() and fb_write() compatible with IGT tests. [1]
This bug has been fixed for fb_write() long ago by
commit 6a2a88668e90 ("[PATCH] fbdev: Fix return error of
fb_write"). The code in fb_read() and the corresponding fb_sys_()
helpers was forgotten.
It can happen that copy_{from, to}_user() only partially copies
the given buffer. Take this into account when calculating the
number of bytes.
v2:
* consider return value from copy_{from,to}_user() (Geert)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/blob/master/tests/fbdev.c # 1
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-15-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-14-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-13-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-12-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-11-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-10-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-9-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-8-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-7-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-6-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-5-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-4-tzimmermann@suse.de
|
