summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-01-18usb: dwc3: remove dwc3 dependency on host AND gadget.Vivek Gautam
DWC3 controller curretly depends on USB && USB_GADGET. Some hardware may like to use only host feature on dwc3, or only gadget feature. So, removing this dependency of USB_DWC3 on USB and USB_GADGET. Adding the mode of operaiton of DWC3 also here HOST/GADGET/DUAL_ROLE based on which features are enabled. [ balbi@ti.com : . make sure we have default modes for all possible Kernel configurations. . Remove the config -> menuconfig change as it's unnecessary . switch over to IS_ENABLED() ] CC: Doug Anderson <dianders@chromium.org> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18powernow-k8: Add a kconfig dependency on acpi-cpufreqBorislav Petkov
Andreas reports in https://bugzilla.kernel.org/show_bug.cgi?id=51741 that with his Gentoo config, acpi-cpufreq wasn't enabled and powernow-k8 couldn't handoff properly to acpi-cpufreq leading to running without P-state support (i.e., cores are constantly in P0). To alleaviate that, we need to make powernow-k8 depend on acpi-cpufreq so that acpi-cpufreq is always present. References: https://bugzilla.kernel.org/show_bug.cgi?id=51741 Reported-by: Andreas <linuxuser330250@gmx.net> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: 3.7+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-18ACPI / cpuidle: Fix NULL pointer issues when cpuidle is disabledKonrad Rzeszutek Wilk
If cpuidle is disabled, that means that: per_cpu(acpi_cpuidle_device, pr->id) is set to NULL as the acpi_processor_power_init ends up failing at retval = cpuidle_register_driver(&acpi_idle_driver) (in acpi_processor_power_init) and never sets the per_cpu idle device. So when acpi_processor_hotplug on CPU online notification tries to reference said device it crashes: cpu 3 spinlock event irq 62 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [<ffffffff81381013>] acpi_processor_setup_cpuidle_cx+0x3f/0x105 PGD a259b067 PUD ab38b067 PMD 0 Oops: 0002 [#1] SMP odules linked in: dm_multipath dm_mod xen_evtchn iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi libcrc32c crc32c nouveau mxm_wmi wmi radeon ttm sg sr_mod sd_mod cdrom ata_generic ata_piix libata crc32c_intel scsi_mod atl1c i915 fbcon tileblit font bitblit softcursor drm_kms_helper video xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd mperf CPU 1 Pid: 3047, comm: bash Not tainted 3.8.0-rc3upstream-00250-g165c029 #1 MSI MS-7680/H61M-P23 (MS-7680) RIP: e030:[<ffffffff81381013>] [<ffffffff81381013>] acpi_processor_setup_cpuidle_cx+0x3f/0x105 RSP: e02b:ffff88001742dca8 EFLAGS: 00010202 RAX: 0000000000010be9 RBX: ffff8800a0a61800 RCX: ffff880105380000 RDX: 0000000000000003 RSI: 0000000000000200 RDI: ffff8800a0a61800 RBP: ffff88001742dce8 R08: ffffffff81812360 R09: 0000000000000200 R10: aaaaaaaaaaaaaaaa R11: 0000000000000001 R12: ffff8800a0a61800 R13: 00000000ffffff01 R14: 0000000000000000 R15: ffffffff81a907a0 FS: 00007fd6942f7700(0000) GS:ffff880105280000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000004 CR3: 00000000a6773000 CR4: 0000000000042660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process bash (pid: 3047, threadinfo ffff88001742c000, task ffff880017944000) Stack: 0000000000000150 ffff880100f59e00 ffff88001742dcd8 ffff8800a0a61800 0000000000000000 00000000ffffff01 0000000000000000 ffffffff81a907a0 ffff88001742dd18 ffffffff813815b1 ffff88001742dd08 ffffffff810ae336 Call Trace: [<ffffffff813815b1>] acpi_processor_hotplug+0x7c/0x9f [<ffffffff810ae336>] ? schedule_delayed_work_on+0x16/0x20 [<ffffffff8137ee8f>] acpi_cpu_soft_notify+0x90/0xca [<ffffffff8166023d>] notifier_call_chain+0x4d/0x70 [<ffffffff810bc369>] __raw_notifier_call_chain+0x9/0x10 [<ffffffff81094a4b>] __cpu_notify+0x1b/0x30 [<ffffffff81652cf7>] _cpu_up+0x103/0x14b [<ffffffff81652e18>] cpu_up+0xd9/0xec [<ffffffff8164a254>] store_online+0x94/0xd0 [<ffffffff814122fb>] dev_attr_store+0x1b/0x20 [<ffffffff81216404>] sysfs_write_file+0xf4/0x170 This patch fixes it. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-18intel_idle: Don't register CPU notifier if we are not running.Konrad Rzeszutek Wilk
The 'intel_idle_probe' probes the CPU and sets the CPU notifier. But if later on during the module initialization we fail (say in cpuidle_register_driver), we stop loading, but we neglect to unregister the CPU notifier. This means that during CPU hotplug events the system will fail: calling intel_idle_init+0x0/0x326 @ 1 intel_idle: MWAIT substates: 0x1120 intel_idle: v0.4 model 0x2A intel_idle: lapic_timer_reliable_states 0xffffffff intel_idle: intel_idle yielding to none initcall intel_idle_init+0x0/0x326 returned -19 after 14 usecs ... some time later, offlining and onlining a CPU: cpu 3 spinlock event irq 62 BUG: unable to ] __cpuidle_register_device+0x1c/0x120 PGD 99b8b067 PUD 99b95067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: xen_evtchn nouveau mxm_wmi wmi radeon ttm i915 fbcon tileblit font atl1c bitblit softcursor drm_kms_helper video xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd mperf CPU 0 Pid: 2302, comm: udevd Not tainted 3.8.0-rc3upstream-00249-g09ad159 #1 MSI MS-7680/H61M-P23 (MS-7680) RIP: e030:[<ffffffff814d956c>] [<ffffffff814d956c>] __cpuidle_register_device+0x1c/0x120 RSP: e02b:ffff88009dacfcb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff880105380000 RCX: 000000000000001c RDX: 0000000000000000 RSI: 0000000000000055 RDI: ffff880105380000 RBP: ffff88009dacfce8 R08: ffffffff81a4f048 R09: 0000000000000008 R10: 0000000000000008 R11: 0000000000000000 R12: ffff880105380000 R13: 00000000ffffffdd R14: 0000000000000000 R15: ffffffff81a523d0 FS: 00007f37bd83b7a0(0000) GS:ffff880105200000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 00000000a09ea000 CR4: 0000000000042660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process udevd (pid: 2302, threadinfo ffff88009dace000, task ffff88009afb47f0) Stack: ffffffff8107f2d0 ffffffff810c2fb7 ffff88009dacfce8 00000000ffffffea ffff880105380000 00000000ffffffdd ffff88009dacfd08 ffffffff814d9882 0000000000000003 ffff880105380000 ffff88009dacfd28 ffffffff81340afd Call Trace: [<ffffffff8107f2d0>] ? collect_cpu_info_local+0x30/0x30 [<ffffffff810c2fb7>] ? __might_sleep+0xe7/0x100 [<ffffffff814d9882>] cpuidle_register_device+0x32/0x70 [<ffffffff81340afd>] intel_idle_cpu_init+0xad/0x110 [<ffffffff81340bc8>] cpu_hotplug_notify+0x68/0x80 [<ffffffff8166023d>] notifier_call_chain+0x4d/0x70 [<ffffffff810bc369>] __raw_notifier_call_chain+0x9/0x10 [<ffffffff81094a4b>] __cpu_notify+0x1b/0x30 [<ffffffff81652cf7>] _cpu_up+0x103/0x14b [<ffffffff81652e18>] cpu_up+0xd9/0xec [<ffffffff8164a254>] store_online+0x94/0xd0 [<ffffffff814122fb>] dev_attr_store+0x1b/0x20 [<ffffffff81216404>] sysfs_write_file+0xf4/0x170 [<ffffffff811a1024>] vfs_write+0xb4/0x130 [<ffffffff811a17ea>] sys_write+0x5a/0xa0 [<ffffffff816643a9>] system_call_fastpath+0x16/0x1b Code: 03 18 00 c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 ec 30 48 89 5d e8 4c 89 65 f0 48 89 fb 4c 89 6d f8 e8 84 08 00 00 <48> 8b 78 08 49 89 c4 e8 f8 7f c1 ff 89 c2 b8 ea ff ff ff 84 d2 RIP [<ffffffff814d956c>] __cpuidle_register_device+0x1c/0x120 RSP <ffff88009dacfcb8> This patch fixes that by moving the CPU notifier registration as the last item to be done by the module. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: 3.6+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-18usb: dwc3: gadget: req->queued must be forced to false in cleanupPratyush Anand
I am not sure, why I found it during SG debugging. But, I noticed that even when req_queued list was empty, there were some request in request_list having queued flag true. If I run test second time, it first removes all request from request_list and hence busy_slot was wrongly incremented. Cc: <stable@vger.kernel.org> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18usb: dwc3: gadget: fix scatter gather implementationPratyush Anand
To work with scatter gather properly, fixes have been done in number of functions. I will explain requirement of each fixes one by one. start_slot: used to retrieve all request of SG during cleanup dwc3_gadget_giveback: We need to skip link TRB if it was one of the intermediate TRB of SG. dwc3_prepare_one_trb: We need to track all submitted TRBs during cleanup. Since, all TRBs would be serially allocated, so we can just keep starting slot info and we can always find rest of them. We need to pass sg node number, so that we cab appropriately program ISOC_FIRST/ISOC, Chain etc. dwc3_prepare_trbs: last_one should be set when it is last node of SG as well as last node of request_list. __dwc3_cleanup_done_trbs: It has been prepared after re-factorization of dwc3_cleanup_done_reqs. It is called for each TRB of SG. Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18usb: dwc3: gadget: no need to pass params in case of UPDATE_TRANSFERPratyush Anand
UPDATE_TRANSFER does not need any parameters. So, no need to prepare it. Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18usb: dwc3: gadget: fix skip LINK_TRB on ISOCPratyush Anand
When we reach to link trb, we just need to increase free_slot and then calculate TRB. Return is not correct, as it will cause wrong TRB DMA address to fetch in case of update transfer. Cc: <stable@vger.kernel.org> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18usb: dwc3: gadget: fix isoc END TRANSFER ConditionPratyush Anand
There were still some corner cases where isoc transfer was not able to restart, specially when missed isoc does not happen , and in fact gadget does not queue any new request during giveback. Cleanup function calls giveback first, which provides a way to queue another request to gadget. But gadget did not had any data. So , it did not call ep_queue. To twist it further, gadget did not queue till cleanup for last queued TRB is called. If we ever reach this scenario, we must call END TRANSFER, so that we receive a new xfernotready with information about current microframe number. Also insure that there is no request submitted to core when issuing END TRANSFER. Cc: <stable@vger.kernel.org> # v3.8 Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18usb: dwc3: gadget: correct return from ep_queuePratyush Anand
Its better to return from each if condition as they are mutually exclusive. Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18usb: dwc3: gadget: fix missed isocPratyush Anand
There are two reasons to generate missed isoc. 1. when the host does not poll for all the data. 2. because of application-side delays that prevent all the data from being transferred in programmed microframe. Current code was able to handle first case only. This patch handles scenario 2 as well.Scenario 2 sometime may occur with complex gadget application, however it can be easily reproduced for testing purpose as follows: a. use isoc binterval as 1 in f_sourcesink. b. use pattern=0 c. introduce a delay of 150us deliberately in source_sink_complete, so that after few frames it lands into scenario 2. d. now run testusb 16 (isoc in test). You will notice that if this patch is not applied then isoc transfer is not able to recover after first missed. Current patch's approach is as under: If missed isoc occurs and there is no request queued then issue END TRANSFER, so that core generates next xfernotready and we will issue a fresh START TRANSFER. If there are still queued request then wait, do not issue either END or UPDATE TRANSFER, just attach next request in request_list during giveback. If any future queued request is successfully transferred then we will issue UPDATE TRANSFER for all request in the request_list. Cc: <stable@vger.kernel.org> # v3.6 v3.7 v3.8 Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18usb: dwc3: Enable usb2 LPM only when connected as usb2.0Pratyush Anand
Synopsys says: The HIRD Threshold field must be set to ‘0’ when the device core is operating in super speed mode. This patch implements above statement. Cc: <stable@vger.kernel.org> # v3.6 v3.7 v3.8 Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18usb: gadget: FunctionFS: Fix missing braces in parse_optsBenoit Goby
Add missing braces around an if block in ffs_fs_parse_opts. This broke parsing the uid/gid mount options and causes mount to fail when using uid/gid. This has been introduced by commit b9b73f7c (userns: Convert usb functionfs to use kuid/kgid where appropriate) in 3.7. Cc: <stable@vger.kernel.org> Signed-off-by: Benoit Goby <benoit@android.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18usb: dwc3: gadget: fix ep->maxburst for ep0Pratyush Anand
dwc3_gadget_set_ep_config expects maxburst as incremented by 1. So, by default initialize ep->maxburst to 1 for ep0. Cc: <stable@vger.kernel.org> Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18ARM: i.MX clock: Change the connection-id for fsl-usb2-udcPeter Chen
As we use platform_device_id for fsl-usb2-udc driver, it needs to change clk connection-id, or the related devm_clk_get will be failed. Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18usb: gadget: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremapPeter Chen
As mach/hardware.h is deleted, we can't visit platform code at driver. It has no phy driver to combine with this controller, so it has to use ioremap to map phy address as a workaround. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18usb: gadget: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_idPeter Chen
As mach/hardware.h is deleted, we need to use platform_device_id to differentiate SoCs. Besides, one cpu_is_mx35 is useless as it has already used pdata to differentiate runtime Meanwhile we update the platform code accordingly. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18usb: musb: cppi_dma: drop '__init' annotationSergei Shtylyov
This patch fixes the following: WARNING: vmlinux.o(.text+0x1e709c): Section mismatch in reference from the funct ion dma_controller_create() to the function .init.text:cppi_controller_start() The function dma_controller_create() references the function __init cppi_controller_start(). This is often because dma_controller_create lacks a __init annotation or the annotation of cppi_controller_start is wrong. This warning is there due to the deficiency in the commit 07a67bbb (usb: musb: Make dma_controller_create __devinit). Since the start() method is only called from musb_init_controller() which is not annotated, drop '__init' annotation from cppi_controller_start() and also cppi_pool_init() since it gets called from that function, to avoid another section mismatch warning... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: stable@vger.kernel.org # 3.7+ Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18ALSA: hda - Fix mute led for another HP machineDavid Henningsson
This machine also has the "HP_Mute_LED_0_A" string in DMI information. Cc: <stable@vger.kernel.org> BugLink: https://bugs.launchpad.net/bugs/1096789 Tested-by: Tammy Yang <tammy.yang@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-18usb: dwc3: debugfs: convert our regdump to use regsetsFelipe Balbi
regset is a generic implementation of regdump utility through debugfs. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18usb: dwc3: gadget: don't redefine 'ret'Felipe Balbi
we have an extra 'ret' variable shadowing a previous definition. Remove it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18usb: dwc3: exynos: use devm_ functionsJingoo Han
The devm_ functions allocate memory that is released when a driver detaches. This makes the code smaller and a bit simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18usb: dwc3: decrease event buffer sizeFelipe Balbi
Currently we're allocating an entire page to serve as our event buffer. Provided our events are 4 bytes long, it's very unlikely we will even trigger 1k events at once. Even in the worst case scenario where every endpoint triggers one event and we still have a couple of error events, that would still be less than 40 events. In order to cope with future versions of the IP which could (or could not) increase the amount of possible events to trigger simultaneously, we're using an arbitrary size of 64 events for our event buffer. We're saving 3840 bytes by doing so. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-17Linux 3.8-rc4v3.8-rc4Linus Torvalds
2013-01-17USB: io_ti: Fix NULL dereference in chase_port()Wolfgang Frisch
The tty is NULL when the port is hanging up. chase_port() needs to check for this. This patch is intended for stable series. The behavior was observed and tested in Linux 3.2 and 3.7.1. Johan Hovold submitted a more elaborate patch for the mainline kernel. [ 56.277883] usb 1-1: edge_bulk_in_callback - nonzero read bulk status received: -84 [ 56.278811] usb 1-1: USB disconnect, device number 3 [ 56.278856] usb 1-1: edge_bulk_in_callback - stopping read! [ 56.279562] BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8 [ 56.280536] IP: [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35 [ 56.281212] PGD 1dc1b067 PUD 1e0f7067 PMD 0 [ 56.282085] Oops: 0002 [#1] SMP [ 56.282744] Modules linked in: [ 56.283512] CPU 1 [ 56.283512] Pid: 25, comm: khubd Not tainted 3.7.1 #1 innotek GmbH VirtualBox/VirtualBox [ 56.283512] RIP: 0010:[<ffffffff8144e62a>] [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35 [ 56.283512] RSP: 0018:ffff88001fa99ab0 EFLAGS: 00010046 [ 56.283512] RAX: 0000000000000046 RBX: 00000000000001c8 RCX: 0000000000640064 [ 56.283512] RDX: 0000000000010000 RSI: ffff88001fa99b20 RDI: 00000000000001c8 [ 56.283512] RBP: ffff88001fa99b20 R08: 0000000000000000 R09: 0000000000000000 [ 56.283512] R10: 0000000000000000 R11: ffffffff812fcb4c R12: ffff88001ddf53c0 [ 56.283512] R13: 0000000000000000 R14: 00000000000001c8 R15: ffff88001e19b9f4 [ 56.283512] FS: 0000000000000000(0000) GS:ffff88001fd00000(0000) knlGS:0000000000000000 [ 56.283512] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 56.283512] CR2: 00000000000001c8 CR3: 000000001dc51000 CR4: 00000000000006e0 [ 56.283512] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 56.283512] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 56.283512] Process khubd (pid: 25, threadinfo ffff88001fa98000, task ffff88001fa94f80) [ 56.283512] Stack: [ 56.283512] 0000000000000046 00000000000001c8 ffffffff810578ec ffffffff812fcb4c [ 56.283512] ffff88001e19b980 0000000000002710 ffffffff812ffe81 0000000000000001 [ 56.283512] ffff88001fa94f80 0000000000000202 ffffffff00000001 0000000000000296 [ 56.283512] Call Trace: [ 56.283512] [<ffffffff810578ec>] ? add_wait_queue+0x12/0x3c [ 56.283512] [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28 [ 56.283512] [<ffffffff812ffe81>] ? chase_port+0x84/0x2d6 [ 56.283512] [<ffffffff81063f27>] ? try_to_wake_up+0x199/0x199 [ 56.283512] [<ffffffff81263a5c>] ? tty_ldisc_hangup+0x222/0x298 [ 56.283512] [<ffffffff81300171>] ? edge_close+0x64/0x129 [ 56.283512] [<ffffffff810612f7>] ? __wake_up+0x35/0x46 [ 56.283512] [<ffffffff8106135b>] ? should_resched+0x5/0x23 [ 56.283512] [<ffffffff81264916>] ? tty_port_shutdown+0x39/0x44 [ 56.283512] [<ffffffff812fcb4c>] ? usb_serial_port_work+0x28/0x28 [ 56.283512] [<ffffffff8125d38c>] ? __tty_hangup+0x307/0x351 [ 56.283512] [<ffffffff812e6ddc>] ? usb_hcd_flush_endpoint+0xde/0xed [ 56.283512] [<ffffffff8144e625>] ? _raw_spin_lock_irqsave+0x14/0x35 [ 56.283512] [<ffffffff812fd361>] ? usb_serial_disconnect+0x57/0xc2 [ 56.283512] [<ffffffff812ea99b>] ? usb_unbind_interface+0x5c/0x131 [ 56.283512] [<ffffffff8128d738>] ? __device_release_driver+0x7f/0xd5 [ 56.283512] [<ffffffff8128d9cd>] ? device_release_driver+0x1a/0x25 [ 56.283512] [<ffffffff8128d393>] ? bus_remove_device+0xd2/0xe7 [ 56.283512] [<ffffffff8128b7a3>] ? device_del+0x119/0x167 [ 56.283512] [<ffffffff812e8d9d>] ? usb_disable_device+0x6a/0x180 [ 56.283512] [<ffffffff812e2ae0>] ? usb_disconnect+0x81/0xe6 [ 56.283512] [<ffffffff812e4435>] ? hub_thread+0x577/0xe82 [ 56.283512] [<ffffffff8144daa7>] ? __schedule+0x490/0x4be [ 56.283512] [<ffffffff8105798f>] ? abort_exclusive_wait+0x79/0x79 [ 56.283512] [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f [ 56.283512] [<ffffffff812e3ebe>] ? usb_remote_wakeup+0x2f/0x2f [ 56.283512] [<ffffffff810570b4>] ? kthread+0x81/0x89 [ 56.283512] [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c [ 56.283512] [<ffffffff8145387c>] ? ret_from_fork+0x7c/0xb0 [ 56.283512] [<ffffffff81057033>] ? __kthread_parkme+0x5c/0x5c [ 56.283512] Code: 8b 7c 24 08 e8 17 0b c3 ff 48 8b 04 24 48 83 c4 10 c3 53 48 89 fb 41 50 e8 e0 0a c3 ff 48 89 04 24 e8 e7 0a c3 ff ba 00 00 01 00 <f0> 0f c1 13 48 8b 04 24 89 d1 c1 ea 10 66 39 d1 74 07 f3 90 66 [ 56.283512] RIP [<ffffffff8144e62a>] _raw_spin_lock_irqsave+0x19/0x35 [ 56.283512] RSP <ffff88001fa99ab0> [ 56.283512] CR2: 00000000000001c8 [ 56.283512] ---[ end trace 49714df27e1679ce ]--- Signed-off-by: Wolfgang Frisch <wfpub@roembden.net> Cc: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17USB: option: add TP-LINK HSUPA Modem MA180Bjørn Mork
The driver description files gives these names to the vendor specific functions on this modem: Diagnostics VID_2357&PID_0201&MI_00 NMEA VID_2357&PID_0201&MI_01 Modem VID_2357&PID_0201&MI_03 Networkcard VID_2357&PID_0201&MI_04 Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17USB: option: blacklist network interface on ONDA MT8205 4G LTEBjørn Mork
The driver description files gives these names to the vendor specific functions on this modem: Diag VID_19D2&PID_0265&MI_00 NMEA VID_19D2&PID_0265&MI_01 AT cmd VID_19D2&PID_0265&MI_02 Modem VID_19D2&PID_0265&MI_03 Net VID_19D2&PID_0265&MI_04 Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging/sb105x: PARPORT config is not good enough must use PARPORT_PCSteven Rostedt
The sb105x driver calls parport_pc_probe_port() which isn't defined if PARPORT_PC isn't enabled. Protecting it with CONFIG_PARPORT is not good enough, must protect it with CONFIG_PARPORT_PC. Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: wlan-ng: Fix clamping of returned SSID lengthTormod Volden
Commit 2e254212 broke listing of available network names, since it clamped the length of the returned SSID to WLAN_BSSID_LEN (6) instead of WLAN_SSID_MAXLEN (32). https://bugzilla.kernel.org/show_bug.cgi?id=52501 Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Cc: stable <stable@vger.kernel.org> # 3.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17Merge tag 'iio-fixes-for-3.8b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Second round of fixes for IIO post 3.8-rc1 Two tiny fixes * A build warning fix due to signed / unsigned comparison * Missing sign extension in adis16080
2013-01-18KVM: PPC: Emulate dcbfAlexander Graf
Guests can trigger MMIO exits using dcbf. Since we don't emulate cache incoherent MMIO, just do nothing and move on. Reported-by: Ben Collins <ben.c@servergy.com> Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Ben Collins <ben.c@servergy.com> CC: stable@vger.kernel.org
2013-01-17PCI: remove depends on CONFIG_EXPERIMENTALKees Cook
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-178250/16?50: Add support for Broadcom TruManage redirected serial portStephen Hurd
Add support for the UART device present in Broadcom TruManage capable NetXtreme chips (ie: 5761m 5762, and 5725). This implementation has a hidden transmit FIFO, so running in single-byte interrupt mode results in too many interrupts. The UART_CAP_HFIFO capability was added to track this. It continues to reload the THR as long as the THRE and TSRE bits are set in the LSR up to a specified limit (1024 is used here). Signed-off-by: Stephen Hurd <shurd@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17pty: return EINVAL for TIOCGPTN for BSD ptysJiri Slaby
Commit bbb63c514a3464342967237a51a21ea8f61ab951 (drivers:tty:fix up ENOIOCTLCMD error handling) changed the default return value from tty ioctl to be ENOTTY and not EINVAL. This is appropriate. But in case of TIOCGPTN for the old BSD ptys glibc started failing because it expects EINVAL to be returned. Only then it continues to obtain the pts name the other way around. So fix this case by explicit return of EINVAL in this case. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: Florian Westphal <fw@strlen.de> Cc: Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> # 3.7+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: vt6656: Fix inconsistent structure packingBen Hutchings
vt6656 has several headers that use the #pragma pack(1) directive to enable structure packing, but never disable it. The layout of structures defined in other headers can then depend on which order the various headers are included in, breaking the One Definition Rule. In practice this resulted in crashes on x86_64 until the order of header inclusion was changed for some files in commit 11d404cb56ecd ('staging: vt6656: fix headers and add cfg80211.'). But we need a proper fix that won't be affected by future changes to the order of inclusion. This removes the #pragma pack(1) directives and adds __packed to the structure definitions for which packing appears to have been intended. Reported-and-tested-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17Drivers: hv: balloon: Fix a memory leakK. Y. Srinivasan
The send buffer was being leaked; fix it. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reported-by: Jason Wang <jasowang@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17Drivers: hv: balloon: Fix a bug in the definition of struct dm_info_msgK. Y. Srinivasan
There is bug in the definition of struct dm_info_msg. This patch fixes the definition of this structure and makes the corresponding adjustments. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17USB: misc: fixup smatch WARNINGDongjin Kim
This patch fixes the warning, 6a099c63650e50ebf7d1259b859a3d230aec4207 [4/10] USB: misc: Add USB3503 High-Speed Hub Controller drivers/usb/misc/usb3503.c:238 usb3503_probe() error: we previously assumed 'pdata' could be null (see line 196) Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17usb: misc: usb3503_probe() can be staticFengguang Wu
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17Revert "drm/radeon: do not move bo to different placement at each cs"Alex Deucher
This reverts commit d025e9e2b890db679f1246037bf65bd4be512627. This causes corruption for a number of users and needs further investigation in the next cycle. https://bugzilla.kernel.org/show_bug.cgi?id=52491 https://bugs.freedesktop.org/show_bug.cgi?id=58659 http://lists.freedesktop.org/archives/dri-devel/2013-January/032961.html Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 patches from Martin Schwidefsky: "A couple of bug fixes: one of the transparent huge page primitives is broken, the sched_clock function overflows after 417 days, the XFS module has grown too large for -fpic and the new pci code has broken normal channel subsystem notifications." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/chsc: fix SEI usage s390/time: fix sched_clock() overflow s390: use -fPIC for module compile s390/mm: fix pmd_pfn() for thp
2013-01-17usb: musb: omap2430: fix wrong devm_kzalloc() result checkSergei Shtylyov
Commit 00a0b1d58af873d842580dcac55f3b156c3a4077 (usb: musb: omap: Add device tree support for omap musb glue) assigns result of devm_kzalloc() call to the 'config' variable but then checks for NULL the 'data' variable (already checked after previous call). Thus we risk a kernel oops further when data pointed by 'config' is written to by subsequent of_property_read_u32() calls iff the allocation happens to fail... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-17usb: musb: fix dependency on transceiver driverMing Lei
This patch let glue driver return -EPROBE_DEFER if the transceiver is not readly, so we can support defer probe on musb to fix the below error on 3.7-rc5 if transceiver drivers are built as module: [ 19.052490] unable to find transceiver of type USB2 PHY [ 19.072052] HS USB OTG: no transceiver configured [ 19.076995] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -19 [ 19.089355] musb-hdrc: probe of musb-hdrc.0.auto rejects match -19 [ 19.096771] driver: 'musb-omap2430': driver_bound: bound to device 'musb-omap2430' [ 19.105194] bus: 'platform': really_probe: bound device musb-omap2430 to driver musb-omap2430 [ 19.174407] bus: 'platform': add driver twl4030_usb [ 19.179656] bus: 'platform': driver_probe_device: matched device twl4030_usb with driver twl4030_usb [ 19.202270] bus: 'platform': really_probe: probing driver twl4030_usb with device twl4030_usb [ 19.214172] twl4030_usb twl4030_usb: HW_CONDITIONS 0xc0/192; link 3 [ 19.239624] musb-omap2430 musb-omap2430: musb core is not yet ready [ 19.246765] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 19.254516] driver: 'twl4030_usb': driver_bound: bound to device 'twl4030_usb' [ 19.263580] bus: 'platform': really_probe: bound device twl4030_usb to driver twl4030_usb Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: <stable@vger.kernel.org> v3.8 Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-17usb: musb: core: fix failure pathMing Lei
In the fail1~fail5 failure path, pm_runtime_disable() should be called to avoid 'Unbalanced pm_runtime_enable' error in next probe() which may be triggered by defer probe or next 'modprobe musb_hdrc'. Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: <stable@vger.kernel.org> v3.8 Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-17usb: musb: Double buffering issues in host mode TXsupriya karanth
Whenever an URB is programmed for transfer, the TXFIFO is flushed. This results in valid packets of the previous transfer to get flushed when double buffering is enabled (The MUSB_TXCSR_FIFONOTEMPTY bit in TXCSR is set indicating that a packet in the FIFO is yet to be sent) For ex:- In Host mode Audio, noise is heard in the headset when double buffering is enabled on the ISO endpoint. The fifo flush is removed for double buffering case. The fifo is now flushed only in cases of error or when aborting a transfer. Also, In Host MSC case, data toggle errors are seen when double buffering is enabled on the bulk endpoint. Whenever an URB is programmed for transfer, the data toggle is set manually resulting in data toggle errors on the bus. Leave the data toggle handling upto the hardware in the double buffering case. Signed-off-by: supriya karanth <supriya.karanth@stericsson.com> Signed-off-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-17usb: musb: omap2430: kill redundant assignments in omap2430_probe()Sergei Shtylyov
Commit 00a0b1d58af873d842580dcac55f3b156c3a4077 (usb: musb: omap: Add device tree support for omap musb glue) added assignments of the 'ret' variable to -ENOMEM on *some* error paths of the calls to devm_kzalloc(), while that variable was already pre-initialized for to that value, so these assignments were completely redundant. Kill them, fixing overindented string, while at it. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-17usb: musb: ux500: use clk_prepare_enable and clk_disable_unprepareFabio Baltieri
This patch converts the module to use clk_prepare_enable and clk_disable_unprepare variants as required by common clock framework. Without this the system crash during probe function. Cc: <stable@vger.kernel.org> # v3.7 v3.8 Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-17fuse: remove unused variable in fuse_try_move_page()Wei Yongjun
The variables mapping,index are initialized but never used otherwise, so remove the unused variables. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-01-17fuse: make fuse_file_fallocate() staticMiklos Szeredi
Fix the following sparse warning: fs/fuse/file.c:2249:6: warning: symbol 'fuse_file_fallocate' was not declared. Should it be static? Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-01-17fuse: Move CUSE Kconfig entry from fs/Kconfig into fs/fuse/KconfigRobert P. J. Day
Given that CUSE depends on FUSE, it only makes sense to move its Kconfig entry into the FUSE Kconfig file. Also, add a few grammatical and semantic touchups. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
generated by cgit (git 2.34.1) at 2025-09-16 21:13:12 +0000