summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-04-11ipv6: Refactor find_rr_leafDavid Ahern
find_rr_leaf has 3 loops over fib_entries calling find_match. The loops are very similar with differences in start point and whether the metric is evaluated: 1. start at rr_head, no extra loop compare, check fib metric 2. start at leaf, compare rt against rr_head, check metric 3. start at cont (potential saved point from earlier loops), no extra loop compare, no metric check Create 1 loop that is called 3 different times. This will make a later change with multipath nexthop objects much simpler. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11ipv6: Refactor find_matchDavid Ahern
find_match primarily needs a fib6_nh (and fib6_flags which it passes through to rt6_score_route). Move fib6_check_expired up to the call sites so find_match is only called for relevant entries. Remove the match argument which is mostly a pass through and use the return boolean to decide if match gets set in the call sites. The end result is a helper that can be called per fib6_nh struct which is needed once fib entries reference nexthop objects that have more than one fib6_nh. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11ipv6: Pass fib6_nh and flags to rt6_score_routeDavid Ahern
rt6_score_route only needs the fib6_flags and nexthop data. Change it accordingly. Allows re-use later for nexthop based fib6_nh. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11ipv6: Change rt6_probe to take a fib6_nhDavid Ahern
rt6_probe sends probes for gateways in a nexthop. As such it really depends on a fib6_nh, not a fib entry. Move last_probe to fib6_nh and update rt6_probe to a fib6_nh struct. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11ipv6: Remove rt6_check_devDavid Ahern
rt6_check_dev is a simpler helper with only 1 caller. Fold the code into rt6_score_route. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11ipv6: Only call rt6_check_neigh for nexthop with gatewayDavid Ahern
Change rt6_check_neigh to take a fib6_nh instead of a fib entry. Move the check on fib_flags and whether the nexthop has a gateway up to the one caller. Remove the inline from the definition as well. Not necessary. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11Merge tag 'for-5.1-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fix parsing of compression algorithm when set as a inode property, this could end up with eg. 'zst' or 'zli' in the value - don't allow trim on a filesystem with unreplayed log, this could cause data loss if there are pending updates to the block groups that would not be subject to trim after replay * tag 'for-5.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: prop: fix vanished compression property after failed set btrfs: prop: fix zstd compression parameter validation Btrfs: do not allow trimming when a fs is mounted with the nologreplay option
2019-04-11selftests: fib_tests: Fix 'Command line is not complete' errorsDavid Ahern
A couple of tests are verifying a route has been removed. The helper expects the prefix as the first part of the expected output. When checking that a route has been deleted the prefix is empty leading to an invalid ip command: $ ip ro ls match Command line is not complete. Try option "help" Fix by moving the comparison of expected output and output to a new function that is used by both check_route and check_route6. Use the new helper for the 2 checks on route removal. Also, remove the reset of 'set -x' in route_setup which overrides the user managed setting. Fixes: d69faad76584c ("selftests: fib_tests: Add prefix route tests with metric") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11dns: remove redundant zero length namelen checkColin Ian King
The zero namelen check is redundant as it has already been checked for zero at the start of the function. Remove the redundant check. Addresses-Coverity: ("Logically Dead Code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11net: netrom: Fix error cleanup path of nr_proto_initYueHaibing
Syzkaller report this: BUG: unable to handle kernel paging request at fffffbfff830524b PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c9716067 PTE 0 Oops: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__list_add_valid+0x21/0xe0 lib/list_debug.c:23 Code: 8b 0c 24 e9 17 fd ff ff 90 55 48 89 fd 48 8d 7a 08 53 48 89 d3 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 48 83 ec 08 <80> 3c 02 00 0f 85 8b 00 00 00 48 8b 53 08 48 39 f2 75 35 48 89 f2 RSP: 0018:ffff8881ea2278d0 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffffffffc1829250 RCX: 1ffff1103d444ef4 RDX: 1ffffffff830524b RSI: ffffffff85659300 RDI: ffffffffc1829258 RBP: ffffffffc1879250 R08: fffffbfff0acb269 R09: fffffbfff0acb269 R10: ffff8881ea2278f0 R11: fffffbfff0acb268 R12: ffffffffc1829250 R13: dffffc0000000000 R14: 0000000000000008 R15: ffffffffc187c830 FS: 00007fe0361df700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff830524b CR3: 00000001eb39a001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] proto_register+0x444/0x8f0 net/core/sock.c:3375 nr_proto_init+0x73/0x4b3 [netrom] ? 0xffffffffc1628000 ? 0xffffffffc1628000 do_one_initcall+0xbc/0x47d init/main.c:887 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0361dec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007fe0361dec70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0361df6bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: netrom(+) ax25 fcrypt pcbc af_alg arizona_ldo1 v4l2_common videodev media v4l2_dv_timings hdlc ide_cd_mod snd_soc_sigmadsp_regmap snd_soc_sigmadsp intel_spi_platform intel_spi mtd spi_nor snd_usbmidi_lib usbcore lcd ti_ads7950 hi6421_regulator snd_soc_kbl_rt5663_max98927 snd_soc_hdac_hdmi snd_hda_ext_core snd_hda_core snd_soc_rt5663 snd_soc_core snd_pcm_dmaengine snd_compress snd_soc_rl6231 mac80211 rtc_rc5t583 spi_slave_time leds_pwm hid_gt683r hid industrialio_triggered_buffer kfifo_buf industrialio ir_kbd_i2c rc_core led_class_flash dwc_xlgmac snd_ymfpci gameport snd_mpu401_uart snd_rawmidi snd_ac97_codec snd_pcm ac97_bus snd_opl3_lib snd_timer snd_seq_device snd_hwdep snd soundcore iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ide_pci_generic piix aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ide_core psmouse input_leds i2c_piix4 serio_raw intel_agp intel_gtt ata_generic agpgart pata_acpi parport_pc rtc_cmos parport floppy sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: rxrpc] Dumping ftrace buffer: (ftrace buffer empty) CR2: fffffbfff830524b ---[ end trace 039ab24b305c4b19 ]--- If nr_proto_init failed, it may forget to call proto_unregister, tiggering this issue.This patch rearrange code of nr_proto_init to avoid such issues. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12Merge tag 'drm-misc-fixes-2019-04-11' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - core: Make atomic_enable and disable optional for CRTC - dw-hdmi: Lower max frequency for the Allwinner H6, SCDC configuration improvements for older controller versions - omap: a fix for the CEC clock management policy Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190411151658.orm46ccd5zmrw27l@flea
2019-04-11net: fec: manage ahb clock in runtime pmAndy Duan
Some SOC like i.MX6SX clock have some limits: - ahb clock should be disabled before ipg. - ahb and ipg clocks are required for MAC MII bus. So, move the ahb clock to runtime management together with ipg clock. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11Merge branch 'bpf-l2-encap'Daniel Borkmann
Alan Maguire says: ==================== Extend bpf_skb_adjust_room growth to mark inner MAC header so that L2 encapsulation can be used for tc tunnels. Patch #1 extends the existing test_tc_tunnel to support UDP encapsulation; later we want to be able to test MPLS over UDP and MPLS over GRE encapsulation. Patch #2 adds the BPF_F_ADJ_ROOM_ENCAP_L2(len) macro, which allows specification of inner mac length. Other approaches were explored prior to taking this approach. Specifically, I tried automatically computing the inner mac length on the basis of the specified flags (so inner maclen for GRE/IPv4 encap is the len_diff specified to bpf_skb_adjust_room minus GRE + IPv4 header length for example). Problem with this is that we don't know for sure what form of GRE/UDP header we have; is it a full GRE header, or is it a FOU UDP header or generic UDP encap header? My fear here was we'd end up with an explosion of flags. The other approach tried was to support inner L2 header marking as a separate room adjustment, i.e. adjust for L3/L4 encap, then call bpf_skb_adjust_room for L2 encap. This can be made to work but because it imposed an order on operations, felt a bit clunky. Patch #3 syncs tools/ bpf.h. Patch #4 extends the tests again to support MPLSoverGRE, MPLSoverUDP, and transparent ethernet bridging (TEB) where the inner L2 header is an ethernet header. Testing of BPF encap against tunnels is done for cases where configuration of such tunnels is possible (MPLSoverGRE[6], MPLSoverUDP, gre[6]tap), and skipped otherwise. Testing of BPF encap/decap is always carried out. Changes since v2: - updated tools/testing/selftest/bpf/config with FOU/MPLS CONFIG variables (patches 1, 4) - reduced noise in patch 1 by avoiding unnecessary movement of code - eliminated inner_mac variable in bpf_skb_net_grow (patch 2) Changes since v1: - fixed formatting of commit references. - BPF_F_ADJ_ROOM_FIXED_GSO flag enabled on all variants (patch 1) - fixed fou6 options for UDP encap; checksum errors observed were due to the fact fou6 tunnel was not set up with correct ipproto options (41 -6). 0 checksums work fine (patch 1) - added definitions for mask and shift used in setting L2 length (patch 2) - allow udp encap with fixed GSO (patch 2) - changed "elen" to "l2_len" to be more descriptive (patch 4) ==================== Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-11selftests_bpf: add L2 encap to test_tc_tunnelAlan Maguire
Update test_tc_tunnel to verify adding inner L2 header encapsulation (an MPLS label or ethernet header) works. Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-11bpf: sync bpf.h to tools/ for BPF_F_ADJ_ROOM_ENCAP_L2Alan Maguire
Sync include/uapi/linux/bpf.h with tools/ equivalent to add BPF_F_ADJ_ROOM_ENCAP_L2(len) macro. Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-11bpf: add layer 2 encap support to bpf_skb_adjust_roomAlan Maguire
commit 868d523535c2 ("bpf: add bpf_skb_adjust_room encap flags") introduced support to bpf_skb_adjust_room for GSO-friendly GRE and UDP encapsulation. For GSO to work for skbs, the inner headers (mac and network) need to be marked. For L3 encapsulation using bpf_skb_adjust_room, the mac and network headers are identical. Here we provide a way of specifying the inner mac header length for cases where L2 encap is desired. Such an approach can support encapsulated ethernet headers, MPLS headers etc. For example to convert from a packet of form [eth][ip][tcp] to [eth][ip][udp][inner mac][ip][tcp], something like the following could be done: headroom = sizeof(iph) + sizeof(struct udphdr) + inner_maclen; ret = bpf_skb_adjust_room(skb, headroom, BPF_ADJ_ROOM_MAC, BPF_F_ADJ_ROOM_ENCAP_L4_UDP | BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 | BPF_F_ADJ_ROOM_ENCAP_L2(inner_maclen)); Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-11selftests_bpf: extend test_tc_tunnel for UDP encapAlan Maguire
commit 868d523535c2 ("bpf: add bpf_skb_adjust_room encap flags") introduced support to bpf_skb_adjust_room for GSO-friendly GRE and UDP encapsulation and later introduced associated test_tc_tunnel tests. Here those tests are extended to cover UDP encapsulation also. Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-11tipc: use standard write_lock & unlock functions when creating nodeJon Maloy
In the function tipc_node_create() we protect the peer capability field by using the node rw_lock. However, we access the lock directly instead of using the dedicated functions for this, as we do everywhere else in node.c. This cosmetic spot is fixed here. Fixes: 40999f11ce67 ("tipc: make link capability update thread safe") Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11clocksource/drivers/oxnas: Fix OX820 compatibleNeil Armstrong
The OX820 compatible is wrong is the driver, fix it. Fixes: 2ea3401e2a84 ("clocksource/drivers/oxnas: Add OX820 compatible") Reported-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-04-11clocksource/drivers/arm_arch_timer: Remove unneeded pr_fmt macroYangtao Li
After this commit ded24019b6b6f(clocksource: arm_arch_timer: clean up printk usage), the previous macro is redundant, so delete it. And move the new macro to the previous position. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-04-11clocksource/drivers/npcm: select TIMER_OFArnd Bergmann
When this is disabled, we get a link failure: drivers/clocksource/timer-npcm7xx.o: In function `npcm7xx_timer_init': timer-npcm7xx.c:(.init.text+0xf): undefined reference to `timer_of_init' Fixes: 1c00289ecd12 ("clocksource/drivers/npcm: Add NPCM7xx timer driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-04-11bpf: fix missing bpf_check_uarg_tail_zero in BPF_PROG_TEST_RUNStanislav Fomichev
Commit b0b9395d865e ("bpf: support input __sk_buff context in BPF_PROG_TEST_RUN") started using bpf_check_uarg_tail_zero in BPF_PROG_TEST_RUN. However, bpf_check_uarg_tail_zero is not defined for !CONFIG_BPF_SYSCALL: net/bpf/test_run.c: In function ‘bpf_ctx_init’: net/bpf/test_run.c:142:9: error: implicit declaration of function ‘bpf_check_uarg_tail_zero’ [-Werror=implicit-function-declaration] err = bpf_check_uarg_tail_zero(data_in, max_size, size); ^~~~~~~~~~~~~~~~~~~~~~~~ Let's not build net/bpf/test_run.c when CONFIG_BPF_SYSCALL is not set. Reported-by: kbuild test robot <lkp@intel.com> Fixes: b0b9395d865e ("bpf: support input __sk_buff context in BPF_PROG_TEST_RUN") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-11Revert "SUNRPC: Micro-optimise when the task is known not to be sleeping"Trond Myklebust
This reverts commit 009a82f6437490c262584d65a14094a818bcb747. The ability to optimise here relies on compiler being able to optimise away tail calls to avoid stack overflows. Unfortunately, we are seeing reports of problems, so let's just revert. Reported-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-04-11NFSv4.1 fix incorrect return value in copy_file_rangeOlga Kornievskaia
According to the NFSv4.2 spec if the input and output file is the same file, operation should fail with EINVAL. However, linux copy_file_range() system call has no such restrictions. Therefore, in such case let's return EOPNOTSUPP and allow VFS to fallback to doing do_splice_direct(). Also when copy_file_range is called on an NFSv4.0 or 4.1 mount (ie., a server that doesn't support COPY functionality), we also need to return EOPNOTSUPP and fallback to a regular copy. Fixes xfstest generic/075, generic/091, generic/112, generic/263 for all NFSv4.x versions. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-04-11xprtrdma: Fix helper that drains the transportChuck Lever
We want to drain only the RQ first. Otherwise the transport can deadlock on ->close if there are outstanding Send completions. Fixes: 6d2d0ee27c7a ("xprtrdma: Replace rpcrdma_receive_wq ... ") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-04-11NFS: Fix handling of reply page vectorChuck Lever
NFSv4 GETACL and FS_LOCATIONS requests stopped working in v5.1-rc. These two need the extra padding to be added directly to the reply length. Reported-by: Olga Kornievskaia <aglo@umich.edu> Fixes: 02ef04e432ba ("NFS: Account for XDR pad of buf->pages") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Olga Kornievskaia <aglo@umich.edu> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-04-11NFS: Forbid setting AF_INET6 to "struct sockaddr_in"->sin_family.Tetsuo Handa
syzbot is reporting uninitialized value at rpc_sockaddr2uaddr() [1]. This is because syzbot is setting AF_INET6 to "struct sockaddr_in"->sin_family (which is embedded into user-visible "struct nfs_mount_data" structure) despite nfs23_validate_mount_data() cannot pass sizeof(struct sockaddr_in6) bytes of AF_INET6 address to rpc_sockaddr2uaddr(). Since "struct nfs_mount_data" structure is user-visible, we can't change "struct nfs_mount_data" to use "struct sockaddr_storage". Therefore, assuming that everybody is using AF_INET family when passing address via "struct nfs_mount_data"->addr, reject if its sin_family is not AF_INET. [1] https://syzkaller.appspot.com/bug?id=599993614e7cbbf66bc2656a919ab2a95fb5d75c Reported-by: syzbot <syzbot+047a11c361b872896a4f@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-04-11netfilter: nf_nat_masquerade: unify ipv4/6 notifier registrationFlorian Westphal
Only reason for having two different register functions was because of ipt_MASQUERADE and ip6t_MASQUERADE being two different modules. Previous patch merged those into xt_MASQUERADE, so we can merge this too. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-11netfilter: x_tables: merge ip and ipv6 masquerade modulesFlorian Westphal
No need to have separate modules for this. before: text data bss dec filename 2038 1168 0 3206 net/ipv4/netfilter/ipt_MASQUERADE.ko 1526 1024 0 2550 net/ipv6/netfilter/ip6t_MASQUERADE.ko after: text data bss dec filename 2521 1296 0 3817 net/netfilter/xt_MASQUERADE.ko Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-11netfilter: nf_nat: merge ip/ip6 masquerade headersFlorian Westphal
Both are now implemented by nf_nat_masquerade.c, so no need to keep different headers. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-11net: sched: flower: use correct ht function to prevent duplicatesVlad Buslov
Implementation of function rhashtable_insert_fast() check if its internal helper function __rhashtable_insert_fast() returns non-NULL pointer and seemingly return -EEXIST in such case. However, since __rhashtable_insert_fast() is called with NULL key pointer, it never actually checks for duplicates, which means that -EEXIST is never returned to the user. Use rhashtable_lookup_insert_fast() hash table API instead. In order to verify that it works as expected and prevent the problem from happening in future, extend tc-tests with new test that verifies that no new filters with existing key can be inserted to flower classifier. Fixes: 1f17f7742eeb ("net: sched: flower: insert filter to ht before offloading it to hw") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11netns: read NETNSA_NSID as s32 attribute in rtnl_net_getid()Guillaume Nault
NETNSA_NSID is signed. Use nla_get_s32() to avoid confusion. Signed-off-by: Guillaume Nault <gnault@redhat.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11net: bridge: multicast: use rcu to access port list from ↵Nikolay Aleksandrov
br_multicast_start_querier br_multicast_start_querier() walks over the port list but it can be called from a timer with only multicast_lock held which doesn't protect the port list, so use RCU to walk over it. Fixes: c83b8fab06fc ("bridge: Restart queries when last querier expires") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11Merge branch 'thunderx-xdp-mtu'David S. Miller
Matteo Croce says: ==================== Fix thunderx MTU with XDP The thunderx driver can't use XDP with all MTU values. This patches sets the right MTU values, and add a check to avoid setting a wrong value which will not function. v3: Fix a copy-paste from two functions, tested on proper hardware: 2: enP2p1s0v0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 1c:1b:0d:0d:52:a4 brd ff:ff:ff:ff:ff:ff [ 787.019730] nicvf 0002:01:00.1 enP2p1s0v0: Jumbo frames not yet supported with XDP, current MTU 1800. RTNETLINK answers: Operation not supported [ 800.574568] nicvf 0002:01:00.1 enP2p1s0v0: Link is Up 10000 Mbps Full duplex [ 807.248321] nicvf 0002:01:00.1 enP2p1s0v0: Jumbo frames not yet supported with XDP, current MTU 1500. RTNETLINK answers: Invalid argument ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11net: thunderx: don't allow jumbo frames with XDPMatteo Croce
The thunderx driver forbids to load an eBPF program if the MTU is too high, but this can be circumvented by loading the eBPF, then raising the MTU. Fix this by limiting the MTU if an eBPF program is already loaded. Fixes: 05c773f52b96e ("net: thunderx: Add basic XDP support") Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11net: thunderx: raise XDP MTU to 1508Matteo Croce
The thunderx driver splits frames bigger than 1530 bytes to multiple pages, making impossible to run an eBPF program on it. This leads to a maximum MTU of 1508 if QinQ is in use. The thunderx driver forbids to load an eBPF program if the MTU is higher than 1500 bytes. Raise the limit to 1508 so it is possible to use L2 protocols which need some more headroom. Fixes: 05c773f52b96e ("net: thunderx: Add basic XDP support") Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11Merge branch 'smc-fixes'David S. Miller
Ursula Braun says: ==================== net/smc: fixes 2019-04-11 here are some fixes in different areas of the smc code for the net tree. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11net/smc: move unhash before release of clcsockUrsula Braun
Commit <26d92e951fe0> ("net/smc: move unhash as early as possible in smc_release()") fixes one occurrence in the smc code, but the same pattern exists in other places. This patch covers the remaining occurrences and makes sure, the unhash operation is done before the smc->clcsock is released. This avoids a potential use-after-free in smc_diag_dump(). Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11net/smc: fix return code from FLUSH commandKarsten Graul
The FLUSH command is used to empty the pnet table. No return code is expected from the command. Commit a9d8b0b1e3d6 added namespace support for the pnet table and changed the FLUSH command processing to call smc_pnet_remove_by_pnetid() to remove the pnet entries. This function returns -ENOENT when no entry was deleted, which is now the return code of the FLUSH command. As a result the FLUSH command will return an error when the pnet table is already empty. Restore the expected behavior and let FLUSH always return 0. Fixes: a9d8b0b1e3d6 ("net/smc: add pnet table namespace support") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11net/smc: propagate file from SMC to TCP socketUrsula Braun
fcntl(fd, F_SETOWN, getpid()) selects the recipient of SIGURG signals that are delivered when out-of-band data arrives on socket fd. If an SMC socket program makes use of such an fcntl() call, it fails in case of fallback to TCP-mode. In case of fallback the traffic is processed with the internal TCP socket. Propagating field "file" from the SMC socket to the internal TCP socket fixes the issue. Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11net/smc: fix a NULL pointer dereferenceKangjie Lu
In case alloc_ordered_workqueue fails, the fix returns NULL to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11net/smc: wait for pending work before clcsock release_sockKarsten Graul
When the clcsock is already released using sock_release() and a pending smc_listen_work accesses the clcsock than that will fail. Solve this by canceling and waiting for the work to complete first. Because the work holds the sock_lock it must make sure that the lock is not hold before the new helper smc_clcsock_release() is invoked. And before the smc_listen_work starts working check if the parent listen socket is still valid, otherwise stop the work early. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11dma-debug: only skip one stackframe entryScott Wood
With skip set to 1, I get a traceback like this: [ 106.867637] DMA-API: Mapped at: [ 106.870784] afu_dma_map_region+0x2cd/0x4f0 [dfl_afu] [ 106.875839] afu_ioctl+0x258/0x380 [dfl_afu] [ 106.880108] do_vfs_ioctl+0xa9/0x720 [ 106.883688] ksys_ioctl+0x60/0x90 [ 106.887007] __x64_sys_ioctl+0x16/0x20 With the previous value of 2, afu_dma_map_region was being omitted. I suspect that the code paths have simply changed since the value of 2 was chosen a decade ago, but it's also possible that it varies based on which mapping function was used, compiler inlining choices, etc. In any case, it's best to err on the side of skipping less. Signed-off-by: Scott Wood <swood@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-04-11platform/x86: pmc_atom: Drop __initconst on dmi tableStephen Boyd
It's used by probe and that isn't an init function. Drop this so that we don't get a section mismatch. Reported-by: kbuild test robot <lkp@intel.com> Cc: David Müller <dave.mueller@gmx.ch> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Fixes: 7c2e07130090 ("clk: x86: Add system specific quirk to mark clocks as critical") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11Merge tag 'gvt-fixes-2019-04-11' of https://github.com/intel/gvt-linux into ↵Rodrigo Vivi
drm-intel-fixes gvt-fixes-2019-04-11 - Fix sparse warning on iomem usage (Chris) - Prevent use-after-free for ppgtt shadow table free (Chris) - Fix display plane size regression for tiled surface (Xiong) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190411064910.GF17995@zhen-hp.sh.intel.com
2019-04-11gpu: host1x: Program stream ID to bypass without SMMUArnd Bergmann
If SMMU support is not available, fall back to programming the bypass stream ID (0x7f). Fixes: de5469c21ff9 ("gpu: host1x: Program the channel stream ID") Suggested-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> [treding@nvidia.com: rebase this on top of a later build fix] Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-04-11Merge branch 'nvme-5.1' of git://git.infradead.org/nvme into for-linusJens Axboe
Pull NVMe fixes from Christoph: "Two nvme fixes for 5.1 - fixing the initial CSN for nvme-fc, and handle log page offsets properly in the target." * 'nvme-5.1' of git://git.infradead.org/nvme: nvmet: fix discover log page when offsets are used nvme-fc: correct csn initialization and increments on error
2019-04-11nvmet: fix discover log page when offsets are usedKeith Busch
The nvme target hadn't been taking the Get Log Page offset parameter into consideration, and so has been returning corrupted log pages when offsets are used. Since many tools, including nvme-cli, split the log request to 4k, we've been breaking discovery log responses when more than 3 subsystems exist. Fix the returned data by internally generating the entire discovery log page and copying only the requested bytes into the user buffer. The command log page offset type has been modified to a native __le64 to make it easier to extract the value from a command. Signed-off-by: Keith Busch <keith.busch@intel.com> Tested-by: Minwoo Im <minwoo.im@samsung.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-04-11nvme-fc: correct csn initialization and increments on errorJames Smart
This patch fixes a long-standing bug that initialized the FC-NVME cmnd iu CSN value to 1. Early FC-NVME specs had the connection starting with CSN=1. By the time the spec reached approval, the language had changed to state a connection should start with CSN=0. This patch corrects the initialization value for FC-NVME connections. Additionally, in reviewing the transport, the CSN value is assigned to the new IU early in the start routine. It's possible that a later dma map request may fail, causing the command to never be sent to the controller. Change the location of the assignment so that it is immediately prior to calling the lldd. Add a comment block to explain the impacts if the lldd were to additionally fail sending the command. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-04-11drm/amd/display: extending AUX SW TimeoutMartin Leung
[Why] AUX takes longer to reply when using active DP-DVI dongle on some asics resulting in up to 2000+ us edid read (timeout). [How] 1. Adjust AUX poll to match spec 2. Extend the SW timeout. This does not affect normal operation since we exit the loop as soon as AUX acks. Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-16 23:08:31 +0000