| Age | Commit message (Collapse) | Author |
|---|
|
The physical address necessary to unmap DMA ('bufferp') is stored
in ath10k_skb_cb as 'paddr'. ath10k doesn't rely on the meta/transfer_id
when handling send completion (htc ep id is stored in sk_buff control
buffer). So the unused output arguments {bufferp, nbytesp and transfer_idp}
are removed from CE send completion. This change is needed before removing
the shadow copy of copy engine (CE) descriptors in follow up patch.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
CE diag window access is serialized (it has to be by design) so
there's no way to get a different send completion. so there's no
need for post completion validation.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
Currently to avoid uncached memory access while filling up copy engine
descriptors, shadow descriptors are used. This can be optimized further
by removing shadow descriptors. To achieve that first shadow ring
dependency in ce_send is removed by creating local copy of the
descriptor on stack and make a one-shot copy into the "uncached"
descriptor.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
This patch adds support for getting firmware debug stats in 10.4 fw.
Signed-off-by: Manikanta Pubbisetty <c_mpubbi@qti.qualcomm.com>
Signed-off-by: Tamizh chelvam <c_traja@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
Add WMI-TLV and FW API support in ath10k testmode.
Ath10k can get right wmi command format from UTF image
to communicate UTF firmware.
Signed-off-by: Alan Liu <alanliu@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
When card is running with DDR mode, dwmmc needs to set DDR_REG bit at
UHS_REG register.
Before this patch, dwmmc controller doesn't consider this.
If this patch is not applied, CRC or other error shoulds be occurred.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
According to DesignWare DoC file, CardThreshold bit should be
bit[27:16].
So it's correct to use (0xFFF << 16), not (0x1FFF << 16).
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The "host->dms->ch" pointer is NULL here so we can't use it to print the
error message.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Enable per-event perf_event_attr.inherit setting by config terms, i.e.
this becomes possible:
$ perf record -e cycles/inherit/ -e instructions/no-inherit/
This affects the default, that can be changed globally using the --no-inherit
option.
This fine grained control appeared in the eBPF patchkit, but this added
flexibility may end up being useful in other scenarios. (Wang Nan)
- Setup pager when printing usage and help, we have long lists of options,
better use the pager like we do with normal tooling output, i.e. when needed,
and including any error messages in the paged output. (Namhyung Kim)
- Search for more options when passing args to -h, e.g.: (Arnaldo Carvalho de Melo)
$ perf report -h interface
Usage: perf report [<options>]
--gtk Use the GTK2 interface
--stdio Use the stdio interface
--tui Use the TUI interface
- Fix reading separate debuginfo files based on a build-id, problem
found on a Debian system. (Dima Kogan)
- Fix endless loop when splitting kallsyms symbols per section for
handling kcore files, problem found on a s390x system. (Jiri Olsa)
Infrastructure changes:
- Prep work for the 'perf stat record' work that will allow generating
perf.data files with counting data in addition to the sampling mode
we have now (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
when checking for the value of the shunt resistor.
Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Any sysfs "show" read access from the client app will result in reading
all registers (8 with ina226). Depending on the host this can limit the
best achievable read rate.
This changeset allows for individual register accesses through regmap.
Tested with BeagleBone Black (Baylibre-ACME) and ina226.
Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
systemd > 218 fails to compile on ia64 with:
error: ‘__NR_kcmp’ undeclared [1].
I've been told that this is because the kcmp syscall hasn't been wired up
for the ia64 arch [2].
The proposed patch thus wire up the kcmp syscall for the ia64 arch.
[1] https://bugs.gentoo.org/show_bug.cgi?id=560492
[2] https://bugs.gentoo.org/show_bug.cgi?id=560492#c17
Signed-off-by: Émeric MASCHINO <emeric.maschino@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
European Union has made it mandatory that all devices working in 2.4 GHz
has to adhere to the ETSI specification (ETSI EN 300 328 V1.9.1)
beginnig this year. The standard basically speaks about interferences
in 2.4Ghz band.
For example, when 802.11 device detects interference, TX must be stopped
as long as interference is present.
Adaptive CCA is a feature, when enabled the device learns from the
environment and configures CCA levels adaptively. This will improve
detecting interferences and the device can stop trasmissions till the
interference is present eventually leading to good performances in
varying interference conditions.
The patch includes code for enabling adaptive CCA for 10.2.4 firmware on
QCA988X.
Signed-off-by: Maharaja <c_mkenna@qti.qualcomm.com>
Signed-off-by: Manikanta Pubbisetty <c_mpubbi@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
|
|
This allows saving a little of space when not using ssb on Broadcom SoC.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
This cleans main.c a bit and will allow us to compile SoC related code
conditionally in the future.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
ssb bus can be found on various "host" devices like PCI/PCMCIA/SDIO.
Every ssb bus contains cores AKA devices.
The main idea is to have ssb driver scan/initialize bus and register
ready-to-use cores. This way ssb drivers can operate on a single core
mostly ignoring underlaying details.
For some reason PCMCIA support was split between ssb and b43. We got
PCMCIA host device probing in b43, then bus scanning in ssb and then
wireless core probing back in b43. The truth is it's very unlikely we
will ever see PCMCIA ssb device with no 802.11 core but I still don't
see any advantage of the current architecture.
With proposed change we get the same functionality with a simpler
architecture, less Kconfig symbols, one killed EXPORT and hopefully
cleaner b43. Since b43 supports both: ssb & bcma I prefer to keep ssb
specific code in ssb driver.
This mostly moves code from b43's pcmcia.c to bridge_pcmcia_80211.c. We
already use similar solution with b43_pci_bridge.c. I didn't use "b43"
in name of this new file as in theory any driver can operate on wireless
core.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
In uap mode the carrier is not enabled until after the first STA joins.
The carrier triggers the bridge to start its state machine, and if STP
is enabled, it takes 4 seconds as it transitions from disabled to
forwarding. During this time the bridge drops all traffic, and the EAPOL
handshake times out after 3 seconds, preventing stations from joining.
Follow the logic used in mac80211 and start the carrier in start_ap
and disable it in stop_ap. This has a nice benefit of allowing the
first station connection time to be reduced by up to 75% when STP is
in use.
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
arm64 has requirement that all the dma operations have actual device.
Otherwise, following warnning message shown and dma allocation fails:
WARNING: CPU: 0 PID: 954 at arch/arm64/mm/dma-mapping.c:106 __dma_alloc+0x24c/0x258()
Use an actual device structure for DMA allocation
Modules linked in: wcn36xx wcn36xx_platform
CPU: 0 PID: 954 Comm: ifconfig Not tainted 4.0.0+ #14
Hardware name: Qualcomm Technologies, Inc. MSM 8916 MTP (DT)
Call trace:
[<ffffffc000089904>] dump_backtrace+0x0/0x124
[<ffffffc000089a38>] show_stack+0x10/0x1c
[<ffffffc000627114>] dump_stack+0x80/0xc4
[<ffffffc0000b2e64>] warn_slowpath_common+0x98/0xd0
[<ffffffc0000b2ee8>] warn_slowpath_fmt+0x4c/0x58
[<ffffffc00009487c>] __dma_alloc+0x248/0x258
[<ffffffbffc009270>] wcn36xx_dxe_allocate_mem_pools+0xc4/0x108 [wcn36xx]
[<ffffffbffc0079c4>] wcn36xx_start+0x38/0x240 [wcn36xx]
[<ffffffc0005f161c>] ieee80211_do_open+0x1b0/0x9a4
[<ffffffc0005f1e68>] ieee80211_open+0x58/0x68
[<ffffffc00051693c>] __dev_open+0xb0/0x120
[<ffffffc000516c10>] __dev_change_flags+0x88/0x150
[<ffffffc000516cf4>] dev_change_flags+0x1c/0x5c
[<ffffffc000570950>] devinet_ioctl+0x644/0x6f0
Signed-off-by: Yin, Fengwei <fengwei.yin@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
wcn36xx implements a ring buffer for transmitted frames for each
(high and low priority) DMA channel. The ring buffers are lockless:
new frames are inserted at the head of the queue, while finished
packets are reaped from the tail.
Unfortunately, the list manipulations are missing any kind of barriers
so are susceptible to various races: for example, a TX completion
handler might read an updated desc->ctrl before the head has actually
advanced, and then null out the ctl->skb pointer while it is still
being used in the TX path.
Simplify things here by adding a spin lock when traversing the ring.
This change increased stability for me without adding any noticeable
overhead on my platform (xperia z).
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Some of the ath9k_phyerr enums were wrong from the
beginning (and even before). Most of the time the
codes were used for counters to be displayed over
debugfs, which made this a non-functional issue.
Some (e.g. ATH9K_PHYERR_FALSE_RADAR_EXT) are used
for radar detection and require the correct code
to work as intended.
This patch includes:
a) fixes
ATH9K_PHYERR_FALSE_RADAR_EXT: 24 => 36
ATH9K_PHYERR_CCK_LENGTH_ILLEGAL: 32 => 28
ATH9K_PHYERR_CCK_POWER_DROP: 33 => 29
ATH9K_PHYERR_HT_CRC_ERROR: 34 => 32
ATH9K_PHYERR_HT_LENGTH_ILLEGAL: 35 => 33
ATH9K_PHYERR_HT_RATE_ILLEGAL: 36 => 34
b) extensions
ATH9K_PHYERR_CCK_BLOCKER = 24
ATH9K_PHYERR_HT_ZLF = 35
ATH9K_PHYERR_GREEN_FIELD = 37
Aside from the correction and completion made in
the enum, the patch also extends the display of
the related counters in the debugfs.
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
The current code exits after alloc_orinocodev, but fails to change the
return value to something that indicates the failure. This patch
changes the return value to -ENOMEM.
https://bugzilla.kernel.org/show_bug.cgi?id=106181
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
SIOCSIWAP (airo_set_wap) affects scan: only the AP specified by
SIOCSIWAP is present in scan results.
This makes NetworkManager work for the first time but then unable to
find any other APs.
Clear APList before starting scan and set it back after scan completes
to work-around the problem.
To avoid losing packets during scan, modify disable_MAC() to omit
netif_carrier_off() call when lock == 2.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Instead of dynamically allocating APList, make it a member of struct
airo_info to always track state of APList_rid.
This simplifies suspend/resume and allows removal of readAPListRid.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
* bug fix for TDLS
* fixes and cleanups in scan
* support of several scan plans
* improvements in FTM
* fixes in FW API
* improvements in the failure paths when the bus is dead
* other various small things here and there
|
|
Commit ddef08dd00f5 ("Driver core: wakeup the parent device before trying
probe") started automatically ensuring the parent device is enabled when
the child gets probed.
This however caused a regression for MUSB omap2430 interface as the
runtime PM for the parent device needs the child initialized to access
the MUSB hardware registers.
Let's delay the enabling of PM runtime for the parent until the child
has been properly initialized as suggested in an earlier patch by
Grygorii Strashko <grygorii.strashko@ti.com>.
In addition to delaying pm_runtime_enable, we now also need to make sure
the parent is enabled during omap2430_musb_init. We also want to propagate
an error from omap2430_runtime_resume if struct musb is not initialized.
Note that we use pm_runtime_put_noidle here for both the child and parent
to prevent an extra runtime_suspend/resume cycle.
Let's also add some comments to avoid confusion between the
two different devices.
Fixes: ddef08dd00f5 ("Driver core: wakeup the parent device before
trying probe")
Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
This reverts commit e306dfd06fcb44d21c80acb8e5a88d55f3d1cf63.
With this patch applied, we were the only architecture making this sort
of adjustment to the PC calculation in the unwinder. This causes
problems for ftrace, where the PC values are matched against the
contents of the stack frames in the callchain and fail to match any
records after the address adjustment.
Whilst there has been some effort to change ftrace to workaround this,
those patches are not yet ready for mainline and, since we're the odd
architecture in this regard, let's just step in line with other
architectures (like arch/arm/) for now.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Commit dd006da21646 ("arm64: mm: increase VA range of identity map")
introduced a mechanism to extend the virtual memory map range
to support arm64 systems with system RAM located at very high offset,
where the identity mapping used to enable/disable the MMU requires
additional translation levels to map the physical memory at an equal
virtual offset.
The kernel detects at boot time the tcr_el1.t0sz value required by the
identity mapping and sets-up the tcr_el1.t0sz register field accordingly,
any time the identity map is required in the kernel (ie when enabling the
MMU).
After enabling the MMU, in the cold boot path the kernel resets the
tcr_el1.t0sz to its default value (ie the actual configuration value for
the system virtual address space) so that after enabling the MMU the
memory space translated by ttbr0_el1 is restored as expected.
Commit dd006da21646 ("arm64: mm: increase VA range of identity map")
also added code to set-up the tcr_el1.t0sz value when the kernel resumes
from low-power states with the MMU off through cpu_resume() in order to
effectively use the identity mapping to enable the MMU but failed to add
the code required to restore the tcr_el1.t0sz to its default value, when
the core returns to the kernel with the MMU enabled, so that the kernel
might end up running with tcr_el1.t0sz value set-up for the identity
mapping which can be lower than the value required by the actual virtual
address space, resulting in an erroneous set-up.
This patchs adds code in the resume path that restores the tcr_el1.t0sz
default value upon core resume, mirroring this way the cold boot path
behaviour therefore fixing the issue.
Cc: <stable@vger.kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Fixes: dd006da21646 ("arm64: mm: increase VA range of identity map")
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
If the STXR instruction fails in the SWP emulation code, we leave *data
overwritten with the loaded value, therefore corrupting the data written
by a subsequent, successful attempt.
This patch re-jigs the code so that we only write back to *data once we
know that the update has happened.
Cc: <stable@vger.kernel.org>
Fixes: bd35a4adc413 ("arm64: Port SWP/SWPB emulation support from arm")
Reported-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Reported-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Commit 685e2d08c54b ("ARM: OMAP1: Change interrupt numbering for
sparse IRQ") turned on SPARSE_IRQ on OMAP1, but forgot to change
the number of INT_DMA_LCD. This broke the boot at least on Nokia 770,
where the device hangs during framebuffer initialization.
Fix by defining INT_DMA_LCD like the other interrupts.
Cc: stable@vger.kernel.org # v4.2+
Fixes: 685e2d08c54b ("ARM: OMAP1: Change interrupt numbering for sparse IRQ")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
This patch creates a 'struct perf_evsel' for every probe in a BPF object
file(s) and fills 'struct evlist' with them. The previously introduced
dummy event is now removed. After this patch, the following command:
# perf record --event filter.o ls
Can trace on each of the probes defined in filter.o.
The core of this patch is bpf__foreach_tev(), which calls a callback
function for each 'struct probe_trace_event' event for a bpf program
with each associated file descriptors. The add_bpf_event() callback
creates evsels by calling parse_events_add_tracepoint().
Since bpf-loader.c will not be built if libbpf is turned off, an empty
bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors.
Committer notes:
Before:
# /tmp/oldperf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.198 MB perf.data ]
# perf evlist
/tmp/foo.o
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
I.e. we create just the PERF_TYPE_SOFTWARE (type: 1),
PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.210 MB perf.data ]
# perf evlist -v
perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period,
sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1,
inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest:
1, mmap2: 1, comm_exec: 1
#
We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd,
which is how, after setting up the event via the kprobes interface, the
'perf_bpf_probe:fork' event is accessible via the perf_event_open
syscall. This is all transient, as soon as the 'perf record' session
ends, these probes will go away.
To see how it looks like, lets try doing a neverending session, one that
expects a control+C to end:
# perf record --event /tmp/foo.o -a
So, with that in place, we can use 'perf probe' to see what is in place:
# perf probe -l
perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c)
We also can use debugfs:
[root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events
p:perf_bpf_probe/fork _text+638512
Ok, now lets stop and see if we got some forks:
[root@felicio linux]# perf record --event /tmp/foo.o -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ]
[root@felicio linux]# perf script
sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30)
sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30)
<SNIP>
Sure enough, we have 111 forks :-)
Callchains seems to work as well:
# perf report --stdio --no-child
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 562 of event 'perf_bpf_probe:fork'
# Event count (approx.): 562
#
# Overhead Command Shared Object Symbol
# ........ ........ ................ ............
#
44.66% sh [kernel.vmlinux] [k] _do_fork
|
---_do_fork
entry_SYSCALL_64_fastpath
__libc_fork
make_child
26.16% make [kernel.vmlinux] [k] _do_fork
<SNIP>
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch utilizes bpf_object__load() provided by libbpf to load all
objects into kernel.
Committer notes:
Testing it:
When using an incorrect kernel version number, i.e., having this in your
eBPF proggie:
int _version __attribute__((section("version"), used)) = 0x40100;
For a 4.3.0-rc6+ kernel, say, this happens and needs checking at event
parsing time, to provide a better error report to the user:
# perf record --event /tmp/foo.o sleep 1
libbpf: load bpf program failed: Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
libbpf: -- END LOG --
libbpf: failed to load program 'fork=_do_fork'
libbpf: failed to load object '/tmp/foo.o'
event syntax error: '/tmp/foo.o'
\___ Invalid argument: Are you root and runing a CONFIG_BPF_SYSCALL kernel?
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
If we instead make it match, i.e. use 0x40300 on this v4.3.0-rc6+
kernel, the whole process goes thru:
# perf record --event /tmp/foo.o -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.202 MB perf.data ]
# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1,
exclude_guest: 1, mmap2: 1, comm_exec: 1
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-6-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch introduces bpf__{un,}probe() functions to enable callers to
create kprobe points based on section names a BPF program. It parses the
section names in the program and creates corresponding 'struct
perf_probe_event' structures. The parse_perf_probe_command() function is
used to do the main parsing work. The resuling 'struct perf_probe_event'
is stored into program private data for further using.
By utilizing the new probing API, this patch creates probe points during
event parsing.
To ensure probe points be removed correctly, register an atexit hook so
even perf quit through exit() bpf__clear() is still called, so probing
points are cleared. Note that bpf_clear() should be registered before
bpf__probe() is called, so failure of bpf__probe() can still trigger
bpf__clear() to remove probe points which are already probed.
strerror style error reporting scaffold is created by this patch.
bpf__strerror_probe() is the first error reporting function in
bpf-loader.c.
Committer note:
Trying it:
To build a test eBPF object file:
I am testing using a script I built from the 'perf test -v LLVM' output:
$ cat ~/bin/hello-ebpf
export KERNEL_INC_OPTIONS="-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.8.3/include -I/home/acme/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/acme/git/linux/include -Iinclude -I/home/acme/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -Iinclude/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h"
export WORKING_DIR=/lib/modules/4.2.0/build
export CLANG_SOURCE=-
export CLANG_OPTIONS=-xc
OBJ=/tmp/foo.o
rm -f $OBJ
echo '__attribute__((section("fork=do_fork"), used)) int fork(void *ctx) {return 0;} char _license[] __attribute__((section("license"), used)) = "GPL";int _version __attribute__((section("version"), used)) = 0x40100;' | \
clang -D__KERNEL__ $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o /tmp/foo.o && file $OBJ
---
First asking to put a probe in a function not present in the kernel
(misses the initial _):
$ perf record --event /tmp/foo.o sleep 1
Probe point 'do_fork' not found.
event syntax error: '/tmp/foo.o'
\___ You need to check probing points in BPF file
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
---
Now, with "__attribute__((section("fork=_do_fork"), used)):
$ grep _do_fork /proc/kallsyms
ffffffff81099ab0 T _do_fork
$ perf record --event /tmp/foo.o sleep 1
Failed to open kprobe_events: Permission denied
event syntax error: '/tmp/foo.o'
\___ Permission denied
---
Cool, we need to provide some better hints, "kprobe_events" is too low
level, one doesn't strictly need to know the precise details of how
these things are put in place, so something that shows the command
needed to fix the permissions would be more helpful.
Lets try as root instead:
# perf record --event /tmp/foo.o sleep 1
Lowering default frequency rate to 1000.
Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
# perf evlist
/tmp/foo.o
[root@felicio ~]# perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period,
sample_freq }: 1000, sample_type: IP|TID|TIME|PERIOD, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1,
sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
---
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
By introducing new rules in tools/perf/util/parse-events.[ly], this
patch enables 'perf record --event bpf_file.o' to select events by an
eBPF object file. It calls parse_events_load_bpf() to load that file,
which uses bpf__prepare_load() and finally calls bpf_object__open() for
the object files.
After applying this patch, commands like:
# perf record --event foo.o sleep
become possible.
However, at this point it is unable to link any useful things onto the
evsel list because the creating of probe points and BPF program
attaching have not been implemented. Before real events are possible to
be extracted, to avoid perf report error because of empty evsel list,
this patch link a dummy evsel. The dummy event related code will be
removed when probing and extracting code is ready.
Commiter notes:
Using it:
$ ls -la foo.o
ls: cannot access foo.o: No such file or directory
$ perf record --event foo.o sleep
libbpf: failed to open foo.o: No such file or directory
event syntax error: 'foo.o'
\___ BPF object file 'foo.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/build/perf/perf.o
/tmp/build/perf/perf.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
$ perf record --event /tmp/build/perf/perf.o sleep
libbpf: /tmp/build/perf/perf.o is not an eBPF object file
event syntax error: '/tmp/build/perf/perf.o'
\___ BPF object file '/tmp/build/perf/perf.o' is invalid
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
$
$ file /tmp/foo.o
/tmp/foo.o: ELF 64-bit LSB relocatable, no machine, version 1 (SYSV), not stripped
$ perf record --event /tmp/foo.o sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
$ perf evlist
/tmp/foo.o
$ perf evlist -v
/tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
$
So, type 1 is PERF_TYPE_SOFTWARE, config 0x9 is PERF_COUNT_SW_DUMMY, ok.
$ perf report --stdio
Error:
The perf.data file has no samples!
# To display the perf.data header info, please use --header/--header-only options.
#
$
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'bpf-loader.[ch]' files are introduced in this patch. Which will be
the interface between perf and libbpf. bpf__prepare_load() resides in
bpf-loader.c. Following patches will enrich these two files.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
By adding libbpf into perf's Makefile, this patch enables perf to build
libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set.
The newly introduced code is similar to how libapi and libtraceevent
are wired into Makefile.perf.
MANIFEST is also updated for 'make perf-*-src-pkg'.
Append make_no_libbpf to tools/perf/tests/make.
The 'bpf' feature check is appended into default FEATURE_TESTS and
FEATURE_DISPLAY, so perf will check the API version of bpf in
/path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except
when we are trying to port this code to an old kernel.
Error messages are also updated to notify users about the lack of BPF
support in 'perf record' if libelf is missing or the BPF API check
failed.
tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf
files when working on perf using tools/perf/tags.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com
[ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
On the r7s72100 Genmai board the MTU2 driver currently triggers a common
clock framework WARN_ON(enable_count) when disabling the clock due to
the MTU2 driver after recent callback rework may call ->set_state_shutdown()
multiple times. A similar issue was spotted for the TMU driver and fixed in:
452b132 clocksource/drivers/sh_tmu: Fix traceback spotted in -next
On r7s72100 Genmai v4.3-rc7 built with shmobile_defconfig spits out the
following during boot:
sh_mtu2 fcff0000.timer: ch0: used for clock events
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:675 clk_core_disable+0x2c/0x6c()
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.3.0-rc7 #1
Hardware name: Generic R7S72100 (Flattened Device Tree)
Backtrace:
[<c00133d4>] (dump_backtrace) from [<c0013570>] (show_stack+0x18/0x1c)
[<c0013558>] (show_stack) from [<c01c7aac>] (dump_stack+0x74/0x90)
[<c01c7a38>] (dump_stack) from [<c00272fc>] (warn_slowpath_common+0x88/0xb4)
[<c0027274>] (warn_slowpath_common) from [<c0027400>] (warn_slowpath_null+0x24/0x2c)
[<c00273dc>] (warn_slowpath_null) from [<c03a9320>] (clk_core_disable+0x2c/0x6c)
[<c03a92f4>] (clk_core_disable) from [<c03aa0a0>] (clk_disable+0x40/0x4c)
[<c03aa060>] (clk_disable) from [<c0395d2c>] (sh_mtu2_disable+0x24/0x50)
[<c0395d08>] (sh_mtu2_disable) from [<c0395d6c>] (sh_mtu2_clock_event_shutdown+0x14/0x1c)
[<c0395d58>] (sh_mtu2_clock_event_shutdown) from [<c007d7d0>] (clockevents_switch_state+0xc8/0x114)
[<c007d708>] (clockevents_switch_state) from [<c007d834>] (clockevents_shutdown+0x18/0x28)
[<c007d81c>] (clockevents_shutdown) from [<c007dd58>] (clockevents_exchange_device+0x70/0x78)
[<c007dce8>] (clockevents_exchange_device) from [<c007e578>] (tick_check_new_device+0x88/0xe0)
[<c007e4f0>] (tick_check_new_device) from [<c007daf0>] (clockevents_register_device+0xac/0x120)
[<c007da44>] (clockevents_register_device) from [<c0395be8>] (sh_mtu2_probe+0x230/0x350)
[<c03959b8>] (sh_mtu2_probe) from [<c028b6f0>] (platform_drv_probe+0x50/0x98)
Reported-by: Chris Brandt <chris.brandt@renesas.com>
Fixes: 19a9ffb ("clockevents/drivers/sh_mtu2: Migrate to new 'set-state' interface")
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
That way a single flip of phys_addr_t to 64 bit ensures all places
dealing with physical addresses get correct data
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Currently we split symbols based on the map comparison, but symbols are stored
within dso objects and maps could point into same dso objects (kernel maps).
Hence we could end up changing rbtree we are currently iterating and mess it
up. It's easily reproduced on s390x by running:
$ perf record -a -- sleep 3
$ perf buildid-list -i perf.data --with-hits
The fix is to compare dso objects instead.
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151026135130.GA26003@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch allows perf record setting event's attr.inherit bit by
config terms like:
# perf record -e cycles/no-inherit/ ...
# perf record -e cycles/inherit/ ...
So user can control inherit bit for each event separately.
In following example, a.out fork()s in main then do some complex
CPU intensive computations in both of its children.
Basic result with and without inherit:
# perf record -e cycles -e instructions ./a.out
[ perf record: Woken up 9 times to write data ]
[ perf record: Captured and wrote 2.205 MB perf.data (47920 samples) ]
# perf report --stdio
# ...
# Samples: 23K of event 'cycles'
# Event count (approx.): 23641752891
...
# Samples: 24K of event 'instructions'
# Event count (approx.): 30428312415
# perf record -i -e cycles -e instructions ./a.out
[ perf record: Woken up 5 times to write data ]
[ perf record: Captured and wrote 1.111 MB perf.data (24019 samples) ]
...
# Samples: 12K of event 'cycles'
# Event count (approx.): 11699501775
...
# Samples: 12K of event 'instructions'
# Event count (approx.): 15058023559
Cancel inherit for one event when globally enable:
# perf record -e cycles/no-inherit/ -e instructions ./a.out
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 1.660 MB perf.data (36004 samples) ]
...
# Samples: 12K of event 'cycles/no-inherit/'
# Event count (approx.): 11895759282
...
# Samples: 24K of event 'instructions'
# Event count (approx.): 30668000441
Enable inherit for one event when globally disable:
# perf record -i -e cycles/inherit/ -e instructions ./a.out
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 1.654 MB perf.data (35868 samples) ]
...
# Samples: 23K of event 'cycles/inherit/'
# Event count (approx.): 23285400229
...
# Samples: 11K of event 'instructions'
# Event count (approx.): 14969050259
Committer note:
One can check if the bit was set, in addition to seeing the result in
the perf.data file size as above by doing one of:
# perf record -e cycles -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.911 MB perf.data (63 samples) ]
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
#
So, the inherit bit was set in both, now, if we disable it globally using
--no-inherit:
# perf record --no-inherit -e cycles -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.910 MB perf.data (56 samples) ]
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
No inherit bit set, then disabling it and setting just on the cycles event:
# perf record --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.909 MB perf.data (48 samples) ]
# perf evlist -v
cycles/inherit/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
instructions: size: 112, config: 0x1, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
#
We can see it as well in by using a more verbose level of debug messages in
the tool that sets up the perf_event_attr, 'perf record' in this case:
[root@zoo ~]# perf record -vv --no-inherit -e cycles/inherit/ -e instructions -a usleep 1
------------------------------------------------------------
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
inherit 1
mmap 1
comm 1
freq 1
task 1
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8
sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8
------------------------------------------------------------
perf_event_attr:
size 112
config 0x1
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
<SNIP>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1446029705-199659-2-git-send-email-wangnan0@huawei.com
[ s/u64/bool/ for the perf_evsel_config_term inherit field - jolsa]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Implement kmap* API for ARC.
This enables
- permanent kernel maps (pkmaps): :kmap() API
- fixmap : kmap_atomic()
We use a very simple/uniform approach for both (unlike some of the other
arches). So fixmap doesn't use the customary compile time address stuff.
The important semantic is sleep'ability (pkmap) vs. not (fixmap) which
the API guarantees.
Note that this patch only enables highmem for subsequent PAE40 support
as there is no real highmem for ARC in pure 32-bit paradigm as explained
below.
ARC has 2:2 address split of the 32-bit address space with lower half
being translated (virtual) while upper half unstranslated
(0x8000_0000 to 0xFFFF_FFFF). kernel itself is linked at base of
unstranslated space (i.e. 0x8000_0000 onwards), which is mapped to say
DDR 0x0 by external Bus Glue logic (outside the core). So kernel can
potentially access 1.75G worth of memory directly w/o need for highmem.
(the top 256M is taken by uncached peripheral space from 0xF000_0000 to
0xFFFF_FFFF)
In PAE40, hardware can address memory beyond 4G (0x1_0000_0000) while
the logical/virtual addresses remain 32-bits. Thus highmem is required
for kernel proper to be able to access these pages for it's own purposes
(user space is agnostic to this anyways).
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Explicit'ify that all memory added so far is low memory
Nothing semantical
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Before we plug in highmem support, some of code needs to be ready for it
- copy_user_highpage() needs to be using the kmap_atomic API
- mk_pte() can't assume page_address()
- do_page_fault() can't assume VMALLOC_END is end of kernel vaddr space
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
- Move the verbosity knob from .data to .bss by using inverted logic
- No need to readout PD1 descriptor
- clip the non pfn bits of PD0 to avoid clipping inside the loop
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Recent GDB (at least on a vanilla Debian box) looks for debug information in
/usr/lib/debug/.build-id/nn/nnnnnnn
where nn/nnnnnn is the build-id of the stripped ELF binary. This is
documented here:
https://sourceware.org/gdb/onlinedocs/gdb/Separate-Debug-Files.html
This was not working in perf because we didn't read the build id until
AFTER we searched for the separate debug information file. This patch
reads the build ID and THEN does the search.
Signed-off-by: Dima Kogan <dima@secretsauce.net>
Link: http://lkml.kernel.org/r/87si6pfwz4.fsf@secretsauce.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This was benign, but wrong. The build-id should live in a char[], not a char*[]
Signed-off-by: Dima Kogan <dima@secretsauce.net>
Link: http://lkml.kernel.org/r/87si6pfwz4.fsf@secretsauce.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
bdi_split_work_to_wbs()
bdi_split_work_to_wbs() uses list_for_each_entry_rcu_continue()
to walk @bdi->wb_list. To set up the initial iteration
condition, it uses list_entry_rcu() to calculate the entry
pointer corresponding to the list head; however, this isn't an
actual RCU dereference and using list_entry_rcu() for it ended
up breaking a proposed list_entry_rcu() change because it was
feeding an non-lvalue pointer into the macro.
Don't use the RCU variant for simple pointer offsetting. Use
list_entry() instead.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Patrick Marlier <patrick.marlier@gmail.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: pranith kumar <bobby.prani@gmail.com>
Link: http://lkml.kernel.org/r/20151027051939.GA19355@mtj.duckdns.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
