summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-12-05nfp: add support for multicast filterDiana Wang
Rewrite nfp_net_set_rx_mode() to implement interface to delivery mc address and operations to firmware by using general mailbox for filtering multicast packets. The operations include add mc address and delete mc address. And the limitation of mc addresses number is 1024 for each net device. User triggers adding mc address by using command below: ip maddress add <mc address> dev <interface name> User triggers deleting mc address by using command below: ip maddress del <mc address> dev <interface name> Signed-off-by: Diana Wang <na.wang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-05xen-netfront: Fix NULL sring after live migrationLin Liu
A NAPI is setup for each network sring to poll data to kernel The sring with source host is destroyed before live migration and new sring with target host is setup after live migration. The NAPI for the old sring is not deleted until setup new sring with target host after migration. With busy_poll/busy_read enabled, the NAPI can be polled before got deleted when resume VM. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: xennet_poll+0xae/0xd20 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Call Trace: finish_task_switch+0x71/0x230 timerqueue_del+0x1d/0x40 hrtimer_try_to_cancel+0xb5/0x110 xennet_alloc_rx_buffers+0x2a0/0x2a0 napi_busy_loop+0xdb/0x270 sock_poll+0x87/0x90 do_sys_poll+0x26f/0x580 tracing_map_insert+0x1d4/0x2f0 event_hist_trigger+0x14a/0x260 finish_task_switch+0x71/0x230 __schedule+0x256/0x890 recalc_sigpending+0x1b/0x50 xen_sched_clock+0x15/0x20 __rb_reserve_next+0x12d/0x140 ring_buffer_lock_reserve+0x123/0x3d0 event_triggers_call+0x87/0xb0 trace_event_buffer_commit+0x1c4/0x210 xen_clocksource_get_cycles+0x15/0x20 ktime_get_ts64+0x51/0xf0 SyS_ppoll+0x160/0x1a0 SyS_ppoll+0x160/0x1a0 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x41/0xa6 ... RIP: xennet_poll+0xae/0xd20 RSP: ffffb4f041933900 CR2: 0000000000000008 ---[ end trace f8601785b354351c ]--- xen frontend should remove the NAPIs for the old srings before live migration as the bond srings are destroyed There is a tiny window between the srings are set to NULL and the NAPIs are disabled, It is safe as the NAPI threads are still frozen at that time Signed-off-by: Lin Liu <lin.liu@citrix.com> Fixes: 4ec2411980d0 ([NET]: Do not check netif_running() and carrier state in ->poll()) Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-05net: microchip: sparx5: correctly free skb in xmitCasper Andersson
consume_skb on transmitted, kfree_skb on dropped, do not free on TX_BUSY. Previously the xmit function could return -EBUSY without freeing, which supposedly is interpreted as a drop. And was using kfree on successfully transmitted packets. sparx5_fdma_xmit and sparx5_inject returns error code, where -EBUSY indicates TX_BUSY and any other error code indicates dropped. Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support") Signed-off-by: Casper Andersson <casper.casan@gmail.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-05octeontx2-pf: Fix potential memory leak in otx2_init_tc()Ziyang Xuan
In otx2_init_tc(), if rhashtable_init() failed, it does not free tc->tc_entries_bitmap which is allocated in otx2_tc_alloc_ent_bitmap(). Fixes: 2e2a8126ffac ("octeontx2-pf: Unify flow management variables") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-05net: ipa: use sysfs_emit() to instead of scnprintf()ye xingchen
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-05net: mdiobus: fix double put fwnode in the error pathYang Yingliang
If phy_device_register() or fwnode_mdiobus_phy_device_register() fail, phy_device_free() is called, the device refcount is decreased to 0, then fwnode_handle_put() will be called in phy_device_release(), but in the error path, fwnode_handle_put() has already been called, so set fwnode to NULL after fwnode_handle_put() in the error path to avoid double put. Fixes: cdde1560118f ("net: mdiobus: fix unbalanced node reference count") Reported-by: Zeng Heng <zengheng4@huawei.com> Tested-by: Zeng Heng <zengheng4@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Zeng Heng <zengheng4@huawei.com> Tested-by: Zeng Heng <zengheng4@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-05Merge tag 'rxrpc-next-20221201-b' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Increasing SACK size and moving away from softirq, parts 2 & 3 Here are the second and third parts of patches in the process of moving rxrpc from doing a lot of its stuff in softirq context to doing it in an I/O thread in process context and thereby making it easier to support a larger SACK table. The full description is in the description for the first part[1] which is already in net-next. The second part includes some cleanups, adds some testing and overhauls some tracing: (1) Remove declaration of rxrpc_kernel_call_is_complete() as the definition is no longer present. (2) Remove the knet() and kproto() macros in favour of using tracepoints. (3) Remove handling of duplicate packets from recvmsg. The input side isn't now going to insert overlapping/duplicate packets into the recvmsg queue. (4) Don't use the rxrpc_conn_parameters struct in the rxrpc_connection or rxrpc_bundle structs - rather put the members in directly. (5) Extract the abort code from a received abort packet right up front rather than doing it in multiple places later. (6) Use enums and symbol lists rather than __builtin_return_address() to indicate where a tracepoint was triggered for local, peer, conn, call and skbuff tracing. (7) Add a refcount tracepoint for the rxrpc_bundle struct. (8) Implement an in-kernel server for the AFS rxperf testing program to talk to (enabled by a Kconfig option). This is tagged as rxrpc-next-20221201-a. The third part introduces the I/O thread and switches various bits over to running there: (1) Fix call timers and call and connection workqueues to not hold refs on the rxrpc_call and rxrpc_connection structs to thereby avoid messy cleanup when the last ref is put in softirq mode. (2) Split input.c so that the call packet processing bits are separate from the received packet distribution bits. Call packet processing gets bumped over to the call event handler. (3) Create a per-local endpoint I/O thread. Barring some tiny bits that still get done in softirq context, all packet reception, processing and transmission is done in this thread. That will allow a load of locking to be removed. (4) Perform packet processing and error processing from the I/O thread. (5) Provide a mechanism to process call event notifications in the I/O thread rather than queuing a work item for that call. (6) Move data and ACK transmission into the I/O thread. ACKs can then be transmitted at the point they're generated rather than getting delegated from softirq context to some process context somewhere. (7) Move call and local processor event handling into the I/O thread. (8) Move cwnd degradation to after packets have been transmitted so that they don't shorten the window too quickly. A bunch of simplifications can then be done: (1) The input_lock is no longer necessary as exclusion is achieved by running the code in the I/O thread only. (2) Don't need to use sk->sk_receive_queue.lock to guard socket state changes as the socket mutex should suffice. (3) Don't take spinlocks in RCU callback functions as they get run in softirq context and thus need _bh annotations. (4) RCU is then no longer needed for the peer's error_targets list. (5) Simplify the skbuff handling in the receive path by dropping the ref in the basic I/O thread loop and getting an extra ref as and when we need to queue the packet for recvmsg or another context. (6) Get the peer address earlier in the input process and pass it to the users so that we only do it once. This is tagged as rxrpc-next-20221201-b. Changes: ======== ver #2) - Added a patch to change four assertions into warnings in rxrpc_read() and fixed a checker warning from a __user annotation that should have been removed.. - Change a min() to min_t() in rxperf as PAGE_SIZE doesn't seem to match type size_t on i386. - Three error handling issues in rxrpc_new_incoming_call(): - If not DATA or not seq #1, should drop the packet, not abort. - Fix a goto that went to the wrong place, dropping a non-held lock. - Fix an rcu_read_lock that should've been an unlock. Tested-by: Marc Dionne <marc.dionne@auristor.com> Tested-by: kafs-testing+fedora36_64checkkafs-build-144@auristor.com Link: https://lore.kernel.org/r/166794587113.2389296.16484814996876530222.stgit@warthog.procyon.org.uk/ [1] Link: https://lore.kernel.org/r/166982725699.621383.2358362793992993374.stgit@warthog.procyon.org.uk/ # v1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-05uprobes/x86: Allow to probe a NOP instruction with 0x66 prefixOleg Nesterov
Intel ICC -hotpatch inserts 2-byte "0x66 0x90" NOP at the start of each function to reserve extra space for hot-patching, and currently it is not possible to probe these functions because branch_setup_xol_ops() wrongly rejects NOP with REP prefix as it treats them like word-sized branch instructions. Fixes: 250bbd12c2fe ("uprobes/x86: Refuse to attach uprobe to "word-sized" branch insns") Reported-by: Seiji Nishikawa <snishika@redhat.com> Suggested-by: Denys Vlasenko <dvlasenk@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20221204173933.GA31544@redhat.com
2022-12-05udf: Increase UDF_MAX_READ_VERSION to 0x0260Bartosz Taudul
Some discs containing the UDF file system are unable to be mounted, failing with the following message: UDF-fs: error (device sr0): udf_fill_super: minUDFReadRev=260 (max is 250) The UDF 2.60 specification [0] states in the section Basic Restrictions & Requirements (page 10): The Minimum UDF Read Revision value shall be at most #0250 for all media with a UDF 2.60 file system. This indicates that a UDF 2.50 implementation can read all UDF 2.60 media. Media that do not have a Metadata Partition may use a value lower than #250. The conclusion is that the discs failing to mount were burned with a faulty software, which didn't follow the specification. This can be worked around by increasing UDF_MAX_READ_VERSION to 0x260, to match the Minimum Read Revision. No other changes are required, as reading UDF 2.60 is backward compatible with UDF 2.50. [0] http://www.osta.org/specs/pdf/udf260.pdf Signed-off-by: Bartosz Taudul <wolf@nereid.pl> Signed-off-by: Jan Kara <jack@suse.cz>
2022-12-05Merge branch irq/misc-6.2 into irq/irqchip-nextMarc Zyngier
* irq/misc-6.2: : . : Random minor fixes and improvments: : : - More Loongson fixes after the Loongarch merge : : - Error handling fixes for wpcm450, GIC... : : - BE detection for a FSL controller : : - Declare the Sifive PLIC as wake-up agnostic : : - Simplify fishing out the device data for the ST irqchip : : - Mark some data structures as __initconst in the apple-aic driver : : - Switch over from strtobool to kstrtobool : : - COMPILET_TEST fixes : : - and the mandatory "repeated word" commit... : . irqchip/ls-extirq: Fix endianness detection irqchip/gic: Use kstrtobool() instead of strtobool() irqchip/sifive-plic: Support wake IRQs irqchip/loongson-liointc: Fix improper error handling in liointc_init() irqchip/sl28cpld: Replace irqchip mask_invert with unmask_base irqchip/wpcm450: Fix memory leak in wpcm450_aic_of_init() irqchip/st: Use device_get_match_data() to simplify the code irqchip/al-fic: Drop obsolete dependency on COMPILE_TEST irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe() irqchip/mips-gic: Drop repeated word in comment irqchip/apple-aic: Mark aic_info structs __initconst Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-12-05Merge branch irq/cirq-v2 into irq/irqchip-nextMarc Zyngier
* irq/cirq-v2: : . : Support for the MTK CIRQv2, courtesy of AngeloGioacchino Del Regno: : : "On newer SoCs (like MT8192/95 and also other non-chromebook chips), the : MediaTek CIRQ controller has a new register layout: this series adds : some more flexibility to the irq-mtk-cirq driver, allowing to select : the register layout based on a SoC-specific compatible." : : . irqchip/irq-mtk-cirq: Add support for System CIRQ on MT8192 irqchip/irq-mtk-cirq: Move register offsets to const array dt-bindings: interrupt-controller: mediatek,cirq: Document MT8192 dt-bindings: interrupt-controller: mediatek,cirq: Migrate to dt schema Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-12-05Merge branch irq/loongarch-of into irq/irqchip-nextMarc Zyngier
* irq/loongarch-of: : . : Initial OF support for LoongArch. Funny how it only took : *one* release from plumbing ACPI into an unsuspecting : architecture to start enabling OF on it. Oh well... : . irqchip/loongarch-cpu: Fix a missing prototype warning dt-bindings: interrupt-controller: add yaml for LoongArch CPU interrupt controller irqchip: loongarch-cpu: add DT support Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-12-05irqchip/loongarch-cpu: Fix a missing prototype warningHuacai Chen
1, Rename loongarch_cpu_irq_of_init() to cpuintc_of_init() in order to keep the same style as the ACPI version. 2, Fix a missing prototype warning by adding a "static" modifier. Fixes: 855d4ca4bdb366aab3d4 ("irqchip: loongarch-cpu: add DT support") Reported-by: kernel test robot <lkp@intel.com> Cc: Peibao Liu <liupeibao@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221205044708.2054022-1-chenhuacai@loongson.cn
2022-12-05irqchip/ls-extirq: Fix endianness detectionSean Anderson
parent is the interrupt parent, not the parent of node. Use node->parent. This fixes endianness detection on big-endian platforms. Fixes: 1b00adce8afd ("irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap") Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221201212807.616191-1-sean.anderson@seco.com
2022-12-05x86/mtrr: Make message for disabled MTRRs more descriptiveJuergen Gross
Instead of just saying "Disabled" when MTRRs are disabled for any reason, tell what is disabled and why. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20221205080433.16643-3-jgross@suse.com
2022-12-05x86/pat: Handle TDX guest PAT initializationJuergen Gross
With the decoupling of PAT and MTRR initialization, PAT will be used even with MTRRs disabled. This seems to break booting up as TDX guest, as the recommended sequence to set the PAT MSR across CPUs can't work in TDX guests due to disabling caches via setting CR0.CD isn't allowed in TDX mode. This is an inconsistency in the Intel documentation between the SDM and the TDX specification. For now handle TDX mode the same way as Xen PV guest mode by just accepting the current PAT MSR setting without trying to modify it. [ bp: Align conditions for better readability. ] Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20221205080433.16643-2-jgross@suse.com
2022-12-05Documentation/features: Use loongarch instead of loongTiezhu Yang
The official arch name is LoongArch [1], we should use small letter loongarch instead of loong in Documentation/features, just use the features-refresh.sh to refresh all the related files. [1] https://www.kernel.org/doc/html/latest/loongarch/index.html Fixes: 5860800e8696 ("Documentation/features: Update the arch support status files") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Link: https://lore.kernel.org/r/1670156327-9631-3-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-12-05Documentation/features-refresh.sh: Only sed the beginning "arch" of ARCH_DIRTiezhu Yang
It should only sed the beginning "arch" of ARCH_DIR in features-refresh.sh, otherwise loongarch is recognized as loong, that is not what we want. Fixes: be99f610a110 ("Documentation/features: Add script that refreshes the arch support status files in place") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Link: https://lore.kernel.org/r/1670156327-9631-2-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-12-05net: encx24j600: Fix invalid logic in reading of MISTAT registerValentina Goncharenko
A loop for reading MISTAT register continues while regmap_read() fails and (mistat & BUSY), but if regmap_read() fails a value of mistat is undefined. The patch proposes to check for BUSY flag only when regmap_read() succeed. Compile test only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: d70e53262f5c ("net: Microchip encx24j600 driver") Signed-off-by: Valentina Goncharenko <goncharenko.vp@ispras.ru> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-05net: encx24j600: Add parentheses to fix precedenceValentina Goncharenko
In functions regmap_encx24j600_phy_reg_read() and regmap_encx24j600_phy_reg_write() in the conditions of the waiting cycles for filling the variable 'ret' it is necessary to add parentheses to prevent wrong assignment due to logical operations precedence. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: d70e53262f5c ("net: Microchip encx24j600 driver") Signed-off-by: Valentina Goncharenko <goncharenko.vp@ispras.ru> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-05net: stmmac: tegra: Add MGBE supportBhadram Varka
Add support for the Multi-Gigabit Ethernet (MGBE/XPCS) IP found on NVIDIA Tegra234 SoCs. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bhadram Varka <vbhadram@nvidia.com> Co-developed-by: Revanth Kumar Uppala <ruppala@nvidia.com> Signed-off-by: Revanth Kumar Uppala <ruppala@nvidia.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-05net: stmmac: Power up SERDES after the PHY linkRevanth Kumar Uppala
The Tegra MGBE ethernet controller requires that the SERDES link is powered-up after the PHY link is up, otherwise the link fails to become ready following a resume from suspend. Add a variable to indicate that the SERDES link must be powered-up after the PHY link. Signed-off-by: Revanth Kumar Uppala <ruppala@nvidia.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-05xfrm: document IPsec packet offload modeLeon Romanovsky
Extend XFRM device offload API description with newly added packet offload mode. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-12-05xfrm: add support to HW update soft and hard limitsLeon Romanovsky
Both in RX and TX, the traffic that performs IPsec packet offload transformation is accounted by HW. It is needed to properly handle hard limits that require to drop the packet. It means that XFRM core needs to update internal counters with the one that accounted by the HW, so new callbacks are introduced in this patch. In case of soft or hard limit is occurred, the driver should call to xfrm_state_check_expire() that will perform key rekeying exactly as done by XFRM core. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-12-05xfrm: speed-up lookup of HW policiesLeon Romanovsky
Devices that implement IPsec packet offload mode should offload SA and policies too. In RX path, it causes to the situation that HW will always have higher priority over any SW policies. It means that we don't need to perform any search of inexact policies and/or priority checks if HW policy was discovered. In such situation, the HW will catch the packets anyway and HW can still implement inexact lookups. In case specific policy is not found, we will continue with packet lookup and check for existence of HW policies in inexact list. HW policies are added to the head of SPD to ensure fast lookup, as XFRM iterates over all policies in the loop. The same solution of adding HW SAs at the begging of the list is applied to SA database too. However, we don't need to change lookups as they are sorted by insertion order and not priority. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-12-05xfrm: add RX datapath protection for IPsec packet offload modeLeon Romanovsky
Traffic received by device with enabled IPsec packet offload should be forwarded to the stack only after decryption, packet headers and trailers removed. Such packets are expected to be seen as normal (non-XFRM) ones, while not-supported packets should be dropped by the HW. Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-12-05xfrm: add TX datapath support for IPsec packet offload modeLeon Romanovsky
In IPsec packet mode, the device is going to encrypt and encapsulate packets that are associated with offloaded policy. After successful policy lookup to indicate if packets should be offloaded or not, the stack forwards packets to the device to do the magic. Signed-off-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Huy Nguyen <huyn@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-12-05docs/zh_CN: Fix '.. only::' directive's expressionAkira Yokosawa
Commit febe6c2f859e ("docs/zh_CN: Add translation zh_CN/doc-guide/index.rst") translated ".. only::" directive too much. Use the one as found in the original doc-guide/index.rst. Fixes: febe6c2f859e ("docs/zh_CN: Add translation zh_CN/doc-guide/index.rst") Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Cc: Wu XiangCheng <bobwxc@email.cn> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Alex Shi <alexs@kernel.org> Reviewed-by: Wu XiangCheng <bobwxc@email.cn> Link: https://lore.kernel.org/r/20221205032622.8697-1-akiyks@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2022-12-05xfrm: add an interface to offload policyLeon Romanovsky
Extend netlink interface to add and delete XFRM policy from the device. This functionality is a first step to implement packet IPsec offload solution. Signed-off-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-12-05xfrm: allow state packet offload modeLeon Romanovsky
Allow users to configure xfrm states with packet offload mode. The packet mode must be requested both for policy and state, and such requires us to do not implement fallback. We explicitly return an error if requested packet mode can't be configured. Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-12-05xfrm: add new packet offload flagLeon Romanovsky
In the next patches, the xfrm core code will be extended to support new type of offload - packet offload. In that mode, both policy and state should be specially configured in order to perform whole offloaded data path. Full offload takes care of encryption, decryption, encapsulation and other operations with headers. As this mode is new for XFRM policy flow, we can "start fresh" with flag bits and release first and second bit for future use. Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-12-05mac802154: fix missing INIT_LIST_HEAD in ieee802154_if_add()Wei Yongjun
Kernel fault injection test reports null-ptr-deref as follows: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:cfg802154_netdev_notifier_call+0x120/0x310 include/linux/list.h:114 Call Trace: <TASK> raw_notifier_call_chain+0x6d/0xa0 kernel/notifier.c:87 call_netdevice_notifiers_info+0x6e/0xc0 net/core/dev.c:1944 unregister_netdevice_many_notify+0x60d/0xcb0 net/core/dev.c:1982 unregister_netdevice_queue+0x154/0x1a0 net/core/dev.c:10879 register_netdevice+0x9a8/0xb90 net/core/dev.c:10083 ieee802154_if_add+0x6ed/0x7e0 net/mac802154/iface.c:659 ieee802154_register_hw+0x29c/0x330 net/mac802154/main.c:229 mcr20a_probe+0xaaa/0xcb1 drivers/net/ieee802154/mcr20a.c:1316 ieee802154_if_add() allocates wpan_dev as netdev's private data, but not init the list in struct wpan_dev. cfg802154_netdev_notifier_call() manage the list when device register/unregister, and may lead to null-ptr-deref. Use INIT_LIST_HEAD() on it to initialize it correctly. Fixes: fcf39e6e88e9 ("ieee802154: add wpan_dev_list") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20221130091705.1831140-1-weiyongjun@huaweicloud.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-12-05efi: Put Linux specific magic number in the DOS headerArd Biesheuvel
GRUB currently relies on the magic number in the image header of ARM and arm64 EFI kernel images to decide whether or not the image in question is a bootable kernel. However, the purpose of the magic number is to identify the image as one that implements the bare metal boot protocol, and so GRUB, which only does EFI boot, is limited unnecessarily to booting images that could potentially be booted in a non-EFI manner as well. This is problematic for the new zboot decompressor image format, as it can only boot in EFI mode, and must therefore not use the bare metal boot magic number in its header. For this reason, the strict magic number was dropped from GRUB, to permit essentially any kind of EFI executable to be booted via the 'linux' command, blurring the line between the linux loader and the chainloader. So let's use the same field in the DOS header that RISC-V and arm64 already use for their 'bare metal' magic numbers to store a 'generic Linux kernel' magic number, which can be used to identify bootable kernel images in PE format which don't necessarily implement a bare metal boot protocol in the same binary. Note that, in the context of EFI, the MS-DOS header is only described in terms of the fields that it shares with the hybrid PE/COFF image format, (i.e., the MS-DOS EXE magic number at offset #0 and the PE header offset at byte offset #0x3c). Since we aim for compatibility with EFI only, and not with MS-DOS or MS-Windows, we can use the remaining space in the MS-DOS header however we want. Let's set the generic magic number for x86 images as well: existing bootloaders already have their own methods to identify x86 Linux images that can be booted in a non-EFI manner, and having the magic number in place there will ease any future transitions in loader implementations to merge the x86 and non-x86 EFI boot paths. Note that 32-bit ARM already uses the same location in the header for a different purpose, but the ARM support is already widely implemented and the EFI zboot decompressor is not available on ARM anyway, so we just disregard it here. Acked-by: Leif Lindholm <quic_llindhol@quicinc.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-12-04hwmon: (dell-smm) Move error message to make probing silentArmin Wolf
If dell-smm-hwmon loads on unsupported hardware like the Dell XPS 17 9710, an error message is printed. This might confuse users, as drivers are expected to be silent if no supported hardware is found. Reorder the error message so its only printed when the driver is loaded with the "force" option being set. Also reword the error message slightly. Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20221130183418.357246-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04selftests/bpf: Fix conflicts with built-in functions in bpf_iter_ksymJames Hilliard
Both tolower and toupper are built in c functions, we should not redefine them as this can result in a build error. Fixes the following errors: progs/bpf_iter_ksym.c:10:20: error: conflicting types for built-in function 'tolower'; expected 'int(int)' [-Werror=builtin-declaration-mismatch] 10 | static inline char tolower(char c) | ^~~~~~~ progs/bpf_iter_ksym.c:5:1: note: 'tolower' is declared in header '<ctype.h>' 4 | #include <bpf/bpf_helpers.h> +++ |+#include <ctype.h> 5 | progs/bpf_iter_ksym.c:17:20: error: conflicting types for built-in function 'toupper'; expected 'int(int)' [-Werror=builtin-declaration-mismatch] 17 | static inline char toupper(char c) | ^~~~~~~ progs/bpf_iter_ksym.c:17:20: note: 'toupper' is declared in header '<ctype.h>' See background on this sort of issue: https://stackoverflow.com/a/20582607 https://gcc.gnu.org/bugzilla/show_bug.cgi?id=12213 (C99, 7.1.3p1) "All identifiers with external linkage in any of the following subclauses (including the future library directions) are always reserved for use as identifiers with external linkage." This is documented behavior in GCC: https://gcc.gnu.org/onlinedocs/gcc/Other-Builtins.html#index-std-2 Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20221203010847.2191265-1-james.hilliard1@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-12-04bpf, sockmap: fix race in sock_map_free()Eric Dumazet
sock_map_free() calls release_sock(sk) without owning a reference on the socket. This can cause use-after-free as syzbot found [1] Jakub Sitnicki already took care of a similar issue in sock_hash_free() in commit 75e68e5bf2c7 ("bpf, sockhash: Synchronize delete from bucket list on map free") [1] refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 0 PID: 3785 at lib/refcount.c:31 refcount_warn_saturate+0x17c/0x1a0 lib/refcount.c:31 Modules linked in: CPU: 0 PID: 3785 Comm: kworker/u4:6 Not tainted 6.1.0-rc7-syzkaller-00103-gef4d3ea40565 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Workqueue: events_unbound bpf_map_free_deferred RIP: 0010:refcount_warn_saturate+0x17c/0x1a0 lib/refcount.c:31 Code: 68 8b 31 c0 e8 75 71 15 fd 0f 0b e9 64 ff ff ff e8 d9 6e 4e fd c6 05 62 9c 3d 0a 01 48 c7 c7 80 bb 68 8b 31 c0 e8 54 71 15 fd <0f> 0b e9 43 ff ff ff 89 d9 80 e1 07 80 c1 03 38 c1 0f 8c a2 fe ff RSP: 0018:ffffc9000456fb60 EFLAGS: 00010246 RAX: eae59bab72dcd700 RBX: 0000000000000004 RCX: ffff8880207057c0 RDX: 0000000000000000 RSI: 0000000000000201 RDI: 0000000000000000 RBP: 0000000000000004 R08: ffffffff816fdabd R09: fffff520008adee5 R10: fffff520008adee5 R11: 1ffff920008adee4 R12: 0000000000000004 R13: dffffc0000000000 R14: ffff88807b1c6c00 R15: 1ffff1100f638dcf FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30c30000 CR3: 000000000d08e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __refcount_dec include/linux/refcount.h:344 [inline] refcount_dec include/linux/refcount.h:359 [inline] __sock_put include/net/sock.h:779 [inline] tcp_release_cb+0x2d0/0x360 net/ipv4/tcp_output.c:1092 release_sock+0xaf/0x1c0 net/core/sock.c:3468 sock_map_free+0x219/0x2c0 net/core/sock_map.c:356 process_one_work+0x81c/0xd10 kernel/workqueue.c:2289 worker_thread+0xb14/0x1330 kernel/workqueue.c:2436 kthread+0x266/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> Fixes: 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during tear down") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Song Liu <songliubraving@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20221202111640.2745533-1-edumazet@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-12-04bpf: Add dummy type reference to nf_conn___init to fix type deduplicationToke Høiland-Jørgensen
The bpf_ct_set_nat_info() kfunc is defined in the nf_nat.ko module, and takes as a parameter the nf_conn___init struct, which is allocated through the bpf_xdp_ct_alloc() helper defined in the nf_conntrack.ko module. However, because kernel modules can't deduplicate BTF types between each other, and the nf_conn___init struct is not referenced anywhere in vmlinux BTF, this leads to two distinct BTF IDs for the same type (one in each module). This confuses the verifier, as described here: https://lore.kernel.org/all/87leoh372s.fsf@toke.dk/ As a workaround, add an explicit BTF_TYPE_EMIT for the type in net/filter.c, so the type definition gets included in vmlinux BTF. This way, both modules can refer to the same type ID (as they both build on top of vmlinux BTF), and the verifier is no longer confused. v2: - Use BTF_TYPE_EMIT (which is a statement so it has to be inside a function definition; use xdp_func_proto() for this, since this is mostly xdp-related). Fixes: 820dc0523e05 ("net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.c") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20221201123939.696558-1-toke@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-12-04bpf: Add sleepable prog tests for cgrp local storageYonghong Song
Add three tests for cgrp local storage support for sleepable progs. Two tests can load and run properly, one for cgroup_iter, another for passing current->cgroups->dfl_cgrp to bpf_cgrp_storage_get() helper. One test has bpf_rcu_read_lock() and failed to load. Signed-off-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20221201050449.2785613-1-yhs@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-12-04bpf: Enable sleeptable support for cgrp local storageYonghong Song
Similar to sk/inode/task local storage, enable sleepable support for cgrp local storage. Signed-off-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20221201050444.2785007-1-yhs@fb.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-12-04hwmon: use sysfs_emit() to instead of scnprintf()ye xingchen
Replace the open-code with sysfs_emit() to simplify the code. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/202212011130317080061@zte.com.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (oxp-sensors) Fix pwm readingJoaquín Ignacio Aramendía
PWM reading is only 1 register long. Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com> Link: https://lore.kernel.org/r/20221128185206.212022-1-samsagax@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (aquacomputer_d5next) Add support for Quadro flow sensor pulsesAleksa Savic
Add support for reading and writing flow sensor pulses value on the Aquacomputer Quadro. Implemented by Leonard Anderweit [1]. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/45 Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20221126071313.34356-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (pmbus/core) Implement regulator get_statusPatrick Rudolph
Add get_status for pmbus_regulator_ops. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Link: https://lore.kernel.org/r/20221124193642.4081054-1-Naresh.Solanki@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (oxp-sensors) Add AOK ZOE and Mini PROJoaquín Ignacio Aramendía
Add support for the AOK ZOE A1 and OXP Mini PRO handheld devices. DMI strings are added to this driver since the same EC layout is used and has similar specs as the OXP mini AMD. The added devices are: - OneXPlayer mini PRO (AMD 6800U) - AOK ZOE A1 (AMD 6800U) Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com> Link: https://lore.kernel.org/r/20221125114901.11309-1-samsagax@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (gsc-hwmon) Switch to flexible array to simplify codeChristophe JAILLET
Using flexible array is more straight forward. It - saves 1 pointer in the 'gsc_hwmon_platform_data' structure - saves an indirection when using this array - saves some LoC and avoids some always spurious pointer arithmetic Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/61a23e1d642397cfcecc4ac3bb0ab485d257987d.1668936855.git.christophe.jaillet@wanadoo.fr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (pmbus) Add power good supportPatrick Rudolph
Update error flags with regulation out if regulator is on & power good status bit is set Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Link: https://lore.kernel.org/r/20221117184022.1808508-1-Naresh.Solanki@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (nct6775) add ASUS CROSSHAIR VIII/TUF/ProArt B550MDenis Pauk
Boards such as * ProArt B550-CREATOR * ProArt Z490-CREATOR 10G * ROG CROSSHAIR VIII EXTREME * ROG CROSSHAIR VIII HERO (WI-FI) * TUF GAMING B550M-E * TUF GAMING B550M-E (WI-FI) * TUF GAMING B550M-PLUS WIFI II have got a nct6775 chip, but by default there's no use of it because of resource conflict with WMI method. This commit adds such boards to the WMI monitoring list. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807 Signed-off-by: Denis Pauk <pauk.denis@gmail.com> Reported-by: yutesdb <mundanedefoliation@gmail.com> Tested-by: yutesdb <mundanedefoliation@gmail.com> Link: https://lore.kernel.org/r/20221114214456.3891-1-pauk.denis@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (coretemp) Add support for dynamic ttargetZhang Rui
Tjmax value retrieved from MSR_IA32_TEMPERATURE_TARGET can be changed at runtime when the Intel SST-PP (Intel Speed Select Technology - Performance Profile) level is changed. As a result, the ttarget value also becomes dyamic. Improve the code to always get updated ttarget value. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20221113153145.32696-4-rui.zhang@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (coretemp) Add support for dynamic tjmaxZhang Rui
Tjmax value retrieved from MSR_IA32_TEMPERATURE_TARGET can be changed at runtime when the Intel SST-PP (Intel Speed Select Technology - Performance Profile) level is changed. Improve the code to always use updated tjmax when it can be retrieved from MSR_IA32_TEMPERATURE_TARGET. When tjmax can not be retrieved from MSR_IA32_TEMPERATURE_TARGET, still follow the previous logic and always use a static tjmax value. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20221113153145.32696-3-rui.zhang@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-12-04hwmon: (coretemp) rearrange tjmax handing codeZhang Rui
Rearrange the tjmax handling code so that it can be used directly in the sysfs attribute callbacks without forward declarations. No functional change in this patch. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20221113153145.32696-2-rui.zhang@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit (git 2.34.1) at 2025-09-24 09:11:31 +0000