summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-12-18Input: alps - v7: document the v7 touchpad packet protocolHans de Goede
Add a table documenting where all the bits are in the v7 touchpad packets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-18Input: alps - v7: fix finger counting for > 2 fingers on clickpadsHans de Goede
Protocol v7 uses the middle / right button bits on clickpads to communicate "location" information of a 3th touch (and possible 4th) touch on clickpads. Specifically when 3 touches are down, if one of the 3 touches is in the left / right button area, this will get reported in the middle / right button bits and the touchpad will still send a TWO type packet rather then a MULTI type packet, so when this happens we must add the finger reported in the button area to the finger count. Likewise we must also add fingers reported this way to the finger count when we get MULTI packets. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=86338 Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-18Input: alps - v7: sometimes a single touch is reported in mt[1]Hans de Goede
The v7 proto differentiates between a primary touch (with high precision) and a secondary touch (with lower precision). Normally when 2 fingers are down and one is lifted the still present touch becomes the primary touch, but some traces have shown that this does not happen always. This commit deals with this by making alps_get_mt_count() not stop at the first empty mt slot, and if a touch is present in mt[1] and not mt[0] moving the data to mt[0] (for input_mt_assign_slots). BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=86338 Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-18Input: alps - v7: ignore new packetsHans de Goede
NEW packets are send to indicate a discontinuity in the finger coordinate reporting. Specifically a finger may have moved from slot 0 to 1 or vice versa. INPUT_MT_TRACK takes care of this for us. NEW packets have 3 problems: 1) They do not contain middle / right button info (on non clickpads) this can be worked around by preserving the old button state 2) They do not contain an accurate fingercount, and they are typically send when the number of fingers changes. We cannot use the old finger count as that may mismatch with the amount of touch coordinates we've available in the NEW packet 3) Their x data for the second touch is inaccurate leading to a possible jump of the x coordinate by 16 units when the first non NEW packet comes in Since problems 2 & 3 cannot be worked around, just ignore them. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=86338 Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-18be2net: Fix incorrect setting of tunnel offload flag in netdev featuresSriharsha Basavapatna
An earlier commit to resolve an issue with encapsulation offloads missed setting a bit in the outer netdev features flag. This results in loss of TSO feature on a VxLAN interface. Fixes: 630f4b70 ("Export tunnel offloads only when a VxLAN tunnel is created") Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-18bnx2x: fix typos in "configure"Jiri Benc
Noticed when debugging ptp. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-18xen-netback: support frontends without feature-rx-notify againDavid Vrabel
Commit bc96f648df1bbc2729abbb84513cf4f64273a1f1 (xen-netback: make feature-rx-notify mandatory) incorrectly assumed that there were no frontends in use that did not support this feature. But the frontend driver in MiniOS does not and since this is used by (qemu) stubdoms, these stopped working. Netback sort of works as-is in this mode except: - If there are no Rx requests and the internal Rx queue fills, only the drain timeout will wake the thread. The default drain timeout of 10 s would give unacceptable pauses. - If an Rx stall was detected and the internal Rx queue is drained, then the Rx thread would never wake. Handle these two cases (when feature-rx-notify is disabled) by: - Reducing the drain timeout to 30 ms. - Disabling Rx stall detection. Reported-by: John <jw@nuclearfallout.net> Tested-by: John <jw@nuclearfallout.net> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-18sparc32: destroy_context() and switch_mm() needs to disable interrupts.Andreas Larsson
Load balancing can be triggered in the critical sections protected by srmmu_context_spinlock in destroy_context() and switch_mm() and can hang the cpu waiting for the rq lock of another cpu that in turn has called switch_mm hangning on srmmu_context_spinlock leading to deadlock. So, disable interrupt while taking srmmu_context_spinlock in destroy_context() and switch_mm() so we don't deadlock. See also commit 77b838fa1ef0 ("[SPARC64]: destroy_context() needs to disable interrupts.") Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-18Merge branches 'pm-opp', 'pm-cpufreq' and 'pm-tools'Rafael J. Wysocki
* pm-opp: PM / OPP: do error handling at the bottom of dev_pm_opp_add_dynamic() PM / OPP: handle allocation of device_opp in a separate routine PM / OPP: reuse find_device_opp() instead of duplicating code PM / OPP: Staticize __dev_pm_opp_remove() PM / OPP: replace kfree with kfree_rcu while freeing 'struct device_opp' * pm-cpufreq: MAINTAINERS: add entry for intel_pstate intel_pstate: Add a few comments intel_pstate: add kernel parameter to force loading * pm-tools: Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()"
2014-12-18Merge branch 'pm-runtime'Rafael J. Wysocki
* pm-runtime: power / PM: Eliminate CONFIG_PM_RUNTIME NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c PM: Remove the SET_PM_RUNTIME_PM_OPS() macro mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro PM / Kconfig: Replace PM_RUNTIME with PM in dependencies ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM
2014-12-18Merge branches 'acpi-fan', 'acpi-video' and 'acpi-ec'Rafael J. Wysocki
* acpi-fan: ACPI / Fan: Use bus id as the name for non PNP0C0B (Fan) devices * acpi-video: ACPI / video: update the skip case for acpi_video_device_in_dod() * acpi-ec: ACPI / EC: Fix unexpected ec_remove_handlers() invocations
2014-12-18Merge branches 'acpi-scan', 'acpi-utils' and 'acpi-pm'Rafael J. Wysocki
* acpi-scan: ACPI / scan: Change the level of _DEP-related messages to KERN_DEBUG * acpi-utils: ACPI / utils: Drop error messages from acpi_evaluate_reference() * acpi-pm: ACPI / PM: Do not disable wakeup GPEs that have not been enabled
2014-12-18MAINTAINERS: changes for wirelessJohn W. Linville
http://marc.info/?l=linux-wireless&m=141883202530292&w=2 This makes it official... :-) Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-18cxgb4: Fix decoding QSA module for ethtool get settingsHariprasad Shenai
QSA module was getting decoded as QSFP module in ethtool get settings, this patch fixes it. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-18geneve: Fix races between socket add and release.Jesse Gross
Currently, searching for a socket to add a reference to is not synchronized with deletion of sockets. This can result in use after free if there is another operation that is removing a socket at the same time. Solving this requires both holding the appropriate lock and checking the refcount to ensure that it has not already hit zero. Inspired by a related (but not exactly the same) issue in the VXLAN driver. Fixes: 0b5e8b8e ("net: Add Geneve tunneling protocol driver") CC: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-18geneve: Remove socket and offload handlers at destruction.Jesse Gross
Sockets aren't currently removed from the the global list when they are destroyed. In addition, offload handlers need to be cleaned up as well. Fixes: 0b5e8b8e ("net: Add Geneve tunneling protocol driver") CC: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-18netlink: Don't reorder loads/stores before marking mmap netlink frame as ↵Thomas Graf
available Each mmap Netlink frame contains a status field which indicates whether the frame is unused, reserved, contains data or needs to be skipped. Both loads and stores may not be reordeded and must complete before the status field is changed and another CPU might pick up the frame for use. Use an smp_mb() to cover needs of both types of callers to netlink_set_status(), callers which have been reading data frame from the frame, and callers which have been filling or releasing and thus writing to the frame. - Example code path requiring a smp_rmb(): memcpy(skb->data, (void *)hdr + NL_MMAP_HDRLEN, hdr->nm_len); netlink_set_status(hdr, NL_MMAP_STATUS_UNUSED); - Example code path requiring a smp_wmb(): hdr->nm_uid = from_kuid(sk_user_ns(sk), NETLINK_CB(skb).creds.uid); hdr->nm_gid = from_kgid(sk_user_ns(sk), NETLINK_CB(skb).creds.gid); netlink_frame_flush_dcache(hdr); netlink_set_status(hdr, NL_MMAP_STATUS_VALID); Fixes: f9c228 ("netlink: implement memory mapped recvmsg()") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-18netlink: Always copy on mmap TX.David Miller
Checking the file f_count and the nlk->mapped count is not completely sufficient to prevent the mmap'd area contents from changing from under us during netlink mmap sendmsg() operations. Be careful to sample the header's length field only once, because this could change from under us as well. Fixes: 5fd96123ee19 ("netlink: implement memory mapped sendmsg()") Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch>
2014-12-18ALSA: usb-audio: extend KEF X300A FU 10 tweak to Arcam rPACJiri Jaburek
The Arcam rPAC seems to have the same problem - whenever anything (alsamixer, udevd, 3.9+ kernel from 60af3d037eb8c, ..) attempts to access mixer / control interface of the card, the firmware "locks up" the entire device, resulting in SNDRV_PCM_IOCTL_HW_PARAMS failed (-5): Input/output error from alsa-lib. Other operating systems can somehow read the mixer (there seems to be playback volume/mute), but any manipulation is ignored by the device (which has hardware volume controls). Cc: <stable@vger.kernel.org> Signed-off-by: Jiri Jaburek <jjaburek@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-18ALSA: hda/realtek - New codec support for ALC298Kailang Yang
Add new support for ALC298 codec. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-18watchdog: imx2_wdt: Fix the argument of watchdog_active()Fabio Estevam
Fix the following build warning by passing the expected argument type to watchdog_active(): drivers/watchdog/imx2_wdt.c: In function 'imx2_wdt_suspend': drivers/watchdog/imx2_wdt.c:340:2: warning: passing argument 1 of 'watchdog_active' from incompatible pointer type [enabled by default] In file included from drivers/watchdog/imx2_wdt.c:38:0: include/linux/watchdog.h:104:20: note: expected 'struct watchdog_device *' but argument is of type 'struct watchdog_device **' Reported-by: Olof's autobuilder <build@lixom.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-12-18watchdog: imx2_wdt: Add power management support.Xiubo Li
Add power management operations(suspend and resume) as part of dev_pm_ops for IMX2 watchdog driver. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-12-18Merge remote-tracking branch 'scsi-queue/drivers-for-3.19' into for-linusJames Bottomley
2014-12-18drm/i915: add missing rpm ref to i915_gem_pwrite_ioctlImre Deak
Without this RPM ref we can hit the device suspended WARN via: i915_gem_object_pin()->ggtt_bind_vma->gen6_ggtt_insert_entries(). I noticed this on my BYT while keeping the i915 device in runtime suspended state for a while. I chose this place to take the ref to avoid the possible deadlock via the mutex_lock taken both later in this function and in the runtime suspend handler. This can happen if an RPM suspend event is queued and need to be flushed before taking the RPM ref. Testcase: igt/pm_rpm/gem-evict-pwrite Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87363 Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-18Revert "drm/i915: Preserve VGACNTR bits from the BIOS"Ville Syrjälä
The VGA_2X_MODE bit apparently affects the display even when the VGA plane is disabled. The bit will set by the BIOS when the panel width is at least 1280 pixels. So by preserving the bit from the BIOS we end up with corrupted display on machines with such high res panels. I only have 1024x768 panels on my gen2 machines so never ran into this problem. The original reason for preserving the VGACNTR register was to make my 830 survive S3 with acpi_sleep=s3_bios option. However after further 830 fixes that option is no longer needed to make S3 work and preserving VGACNTR doesn't seem to be necessary without it, so we can just revert the entire patch. This reverts commit 69769f9a422bfc62e17399da3590c5e31ac37f24 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Fri Aug 15 01:22:08 2014 +0300 drm/i915: Preserve VGACNTR bits from the BIOS Cc: Bruno Prémont <bonbons@linux-vserver.org> Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87171 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-18x86/tls: Don't validate lm in set_thread_area() after allAndy Lutomirski
It turns out that there's a lurking ABI issue. GCC, when compiling this in a 32-bit program: struct user_desc desc = { .entry_number = idx, .base_addr = base, .limit = 0xfffff, .seg_32bit = 1, .contents = 0, /* Data, grow-up */ .read_exec_only = 0, .limit_in_pages = 1, .seg_not_present = 0, .useable = 0, }; will leave .lm uninitialized. This means that anything in the kernel that reads user_desc.lm for 32-bit tasks is unreliable. Revert the .lm check in set_thread_area(). The value never did anything in the first place. Fixes: 0e58af4e1d21 ("x86/tls: Disallow unusual TLS segments") Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # Only if 0e58af4e1d21 is backported Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/d7875b60e28c512f6a6fc0baf5714d58e7eaadbb.1418856405.git.luto@amacapital.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-18drm/i915: Don't call intel_prepare_page_flip() multiple times on gen2-4Ville Syrjälä
The flip stall detector kicks in when pending>=INTEL_FLIP_COMPLETE. That means if we first call intel_prepare_page_flip() but don't call intel_finish_page_flip(), the next stall check will erroneosly think the page flip was somehow stuck. With enough debug spew emitted from the interrupt handler my 830 hangs when this happens. My theory is that the previous vblank interrupt gets sufficiently delayed that the handler will see the pending bit set in IIR, but ISR still has the bit set as well (ie. the flip was processed by CS but didn't complete yet). In this case the handler will proceed to call intel_check_page_flip() immediately after intel_prepare_page_flip(). It then tries to print a backtrace for the stuck flip WARN, which apparetly results in way too much debug spew delaying interrupt processing further. That then seems to cause an endless loop in the interrupt handler, and the machine is dead until the watchdog kicks in and reboots. At least limiting the number of iterations of the loop in the interrupt handler also prevented the hang. So it seems better to not call intel_prepare_page_flip() without immediately calling intel_finish_page_flip(). The IIR/ISR trickery avoids races here so this is a perfectly safe thing to do. v2: Fix typo in commit message (checkpatch) Cc: stable@vger.kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88381 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85888 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-18drm/i915: Kill check_power_well() callsVille Syrjälä
pps_{lock,unlock}() call intel_display_power_{get,put}() outside pps_mutes to avoid deadlocks with the power_domain mutex. In theory during aux transfers we should usually have the relevant power domain references already held by some higher level code, so this should not result in much overhead (exception being userspace i2c-dev access). However thanks to the check_power_well() calls in intel_display_power_{get/put}() we end up doing a few Punit reads for each aux transfer. Obviously doing this for each byte transferred via i2c-over-aux is not a good idea. I can't think of a good way to keep check_power_well() while eliminating the overhead, so let's just remove check_power_well() entirely. Fixes a driver init time regression introduced by: commit 773538e86081d146e0020435d614f4b96996c1f9 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Thu Sep 4 14:54:56 2014 +0300 drm/i915: Reset power sequencer pipe tracking when disp2d is off Credit goes to Jani for figuring this out. v2: Add the regression note in the commit message. Cc: stable@vger.kernel.org (v3.18+) Cc: Egbert Eich <eich@suse.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86201 Tested-by: Wendy Wang <wendy.wang@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-18powerpc/powernv: Ignore smt-enabled on Power8 and laterGreg Kurz
Starting with POWER8, the subcore logic relies on all threads of a core being booted so that they can participate in split mode switches. So on those machines we ignore the smt_enabled_at_boot setting (smt-enabled on the kernel command line). Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> [mpe: Update comment and change log to be more precise] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-18s390/kvm: REPLACE barrier fixup with READ_ONCEChristian Borntraeger
ACCESS_ONCE does not work reliably on non-scalar types. For example gcc 4.6 and 4.7 might remove the volatile tag for such accesses during the SRA (scalar replacement of aggregates) step (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145) Commit 1365039d0cb3 ("KVM: s390: Fix ipte locking") replace ACCESS_ONCE with barriers. Lets use READ_ONCE instead. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-12-18arm/spinlock: Replace ACCESS_ONCE with READ_ONCEChristian Borntraeger
ACCESS_ONCE does not work reliably on non-scalar types. For example gcc 4.6 and 4.7 might remove the volatile tag for such accesses during the SRA (scalar replacement of aggregates) step (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145) Change the spinlock code to replace ACCESS_ONCE with READ_ONCE. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-12-18arm64/spinlock: Replace ACCESS_ONCE READ_ONCEChristian Borntraeger
ACCESS_ONCE does not work reliably on non-scalar types. For example gcc 4.6 and 4.7 might remove the volatile tag for such accesses during the SRA (scalar replacement of aggregates) step (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145) Change the spinlock code to replace ACCESS_ONCE with READ_ONCE. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-12-18mips/gup: Replace ACCESS_ONCE with READ_ONCEChristian Borntraeger
ACCESS_ONCE does not work reliably on non-scalar types. For example gcc 4.6 and 4.7 might remove the volatile tag for such accesses during the SRA (scalar replacement of aggregates) step https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145) Change the gup code to replace ACCESS_ONCE with READ_ONCE. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-12-18x86/gup: Replace ACCESS_ONCE with READ_ONCEChristian Borntraeger
ACCESS_ONCE does not work reliably on non-scalar types. For example gcc 4.6 and 4.7 might remove the volatile tag for such accesses during the SRA (scalar replacement of aggregates) step (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145) Change the gup code to replace ACCESS_ONCE with READ_ONCE. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-12-18x86/spinlock: Replace ACCESS_ONCE with READ_ONCEChristian Borntraeger
ACCESS_ONCE does not work reliably on non-scalar types. For example gcc 4.6 and 4.7 might remove the volatile tag for such accesses during the SRA (scalar replacement of aggregates) step (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145) Change the spinlock code to replace ACCESS_ONCE with READ_ONCE. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-12-18mm: replace ACCESS_ONCE with READ_ONCE or barriersChristian Borntraeger
ACCESS_ONCE does not work reliably on non-scalar types. For example gcc 4.6 and 4.7 might remove the volatile tag for such accesses during the SRA (scalar replacement of aggregates) step (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145) Let's change the code to access the page table elements with READ_ONCE that does implicit scalar accesses for the gup code. mm_find_pmd is tricky, because m68k and sparc(32bit) define pmd_t as array of longs. This code requires just that the pmd_present and pmd_trans_huge check are done on the same value, so a barrier is sufficent. A similar case is in handle_pte_fault. On ppc44x the word size is 32 bit, but a pte is 64 bit. A barrier is ok as well. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: linux-mm@kvack.org Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-12-18kernel: Provide READ_ONCE and ASSIGN_ONCEChristian Borntraeger
ACCESS_ONCE does not work reliably on non-scalar types. For example gcc 4.6 and 4.7 might remove the volatile tag for such accesses during the SRA (scalar replacement of aggregates) step https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145) Let's provide READ_ONCE/ASSIGN_ONCE that will do all accesses via scalar types as suggested by Linus Torvalds. Accesses larger than the machines word size cannot be guaranteed to be atomic. These macros will use memcpy and emit a build warning. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-12-18Merge tag 'signed-kvm-ppc-next' of git://github.com/agraf/linux-2.6 into HEADPaolo Bonzini
Patch queue for ppc - 2014-12-18 Highights this time around: - Removal of HV support for 970. It became a maintenance burden and received practically no testing. POWER8 with HV is available now, so just grab one of those boxes if PR isn't enough for you. - Some bug fixes and performance improvements - Tracepoints for book3s_hv
2014-12-18KVM: move APIC types to arch/x86/Paolo Bonzini
They are not used anymore by IA64, move them away. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-18powerpc/uaccess: Allow get_user() with bitwise typesMichael S. Tsirkin
At the moment, if p and x are both of the same bitwise type (eg. __le32), get_user(x, p) produces a sparse warning. This is because *p is loaded into a long then cast back to typeof(*p). When typeof(*p) is a bitwise type (which is uncommon), such a cast needs __force, otherwise sparse produces a warning. For non-bitwise types __force should have no effect, and should not hide any legitimate errors. Note that we are casting to typeof(*p) not typeof(x). Even with the cast, if x and *p are of different types we should get the warning, so I think we are not loosing the ability to detect any actual errors. virtio would like to use bitwise types with get_user() so fix these spurious warnings by adding __force. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> [mpe: Fill in changelog with more details] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-18ALSA: asihpi: update to HPI version 4.14Eliot Blennerhassett
This corresponds with updated asihpi firmware in alsa-firmware repo Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-18ALSA: asihpi: increase tuner pad cache sizeEliot Blennerhassett
Increase size allocated for PAD (programme associated data) control. This is used by newer tuner products. Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-18ALSA: asihpi: relax firmware version checkEliot Blennerhassett
Some products firmware is no longer being updated e.g. dsp5000, dsp8700 but it should continue to work with updated HPI versions. Avoid regression by allowing this firmware to be loaded as long as major version is the same. Warn about mismatching versions, as matching versions are preferred. Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-18ALSA: usb-audio: Fix Scarlett 6i6 initialization typoChris J Arges
The num_controls field was incorrectly set to 0 causing 6i6 to not be initialized. Set this to 9. Reported-and-tested-by: Mark Roberts <sunifiram@gmail.com> Signed-off-by: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-12-18Merge tag 'perf-core-for-mingo-2' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - The mmap address range for the ring buffer now is calculated using the contents of /proc/sys/kernel/perf_event_mlock_kb. This fixes an -EPERM case where 'trace' was trying to use more than what is configured on perf_event_mlock_kb. (Arnaldo Carvalho de Melo) Infrastructure changes: - Move bitops definitions so that they match the header file hierarchy in the kernel sources where that code came from. (Arnaldo Carvalho de Melo) - Adopt round{down,up}_pow_of_two from the kernel and use it instead of equivalent code, so that we reuse more kernel code and make tools/ look more like kernel source code, to encourage further contributions from kernel hackers (Arnaldo Carvalho de Melo) - Fix use after free in filename__read_build_id (Mitchell Krome) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-17Ceph: remove left-over reject fileLinus Torvalds
Neither Sage nor I noticed that Zheng Yan had mistakenly committed fs/ceph/super.h.rej as part of commit 31c542a199d7 ("ceph: add inline data to pagecache"). Remove it. Requested-by: Yan, Zheng <ukernel@gmail.com> Cc: Sage Weil <sweil@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-18param: do not set store func without write permKees Cook
When a module_param is defined without DAC write permissions, it can still be changed at runtime and updated. Drivers using a 0444 permission may be surprised that these values can still be changed. For drivers that want to allow updates, any S_IW* flag will set the "store" function as before. Drivers without S_IW* flags will have the "store" function unset, unforcing a read-only value. Drivers that wish neither "store" nor "get" can continue to use "0" for perms to stay out of sysfs entirely. Old behavior: # cd /sys/module/snd/parameters # ls -l total 0 -r--r--r-- 1 root root 4096 Dec 11 13:55 cards_limit -r--r--r-- 1 root root 4096 Dec 11 13:55 major -r--r--r-- 1 root root 4096 Dec 11 13:55 slots # cat major 116 # echo -1 > major -bash: major: Permission denied # chmod u+w major # echo -1 > major # cat major -1 New behavior: ... # chmod u+w major # echo -1 > major -bash: echo: write error: Input/output error Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-12-18cpufreq-dt: defer probing if OPP table is not readyDmitry Torokhov
cpufreq-dt driver supports mode when OPP table is provided by platform code and not device tree. However on certain platforms code that fills OPP table may run after cpufreq driver tries to initialize, so let's report -EPROBE_DEFER if we do not find any entires in OPP table for the CPU. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-12-18Merge branch 'pm-opp' into pm-cpufreqRafael J. Wysocki
2014-12-18PM / OPP: take RCU lock in dev_pm_opp_get_opp_countDmitry Torokhov
A lot of callers are missing the fact that dev_pm_opp_get_opp_count needs to be called under RCU lock. Given that RCU locks can safely be nested, instead of providing *_locked() API, let's take RCU lock inside dev_pm_opp_get_opp_count() and leave callers as is. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-09-12 11:53:00 +0000