summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-05ipv6: make ipv6_renew_options() interrupt/kernel safePaul Moore
At present the ipv6_renew_options_kern() function ends up calling into access_ok() which is problematic if done from inside an interrupt as access_ok() calls WARN_ON_IN_IRQ() on some (all?) architectures (x86-64 is affected). Example warning/backtrace is shown below: WARNING: CPU: 1 PID: 3144 at lib/usercopy.c:11 _copy_from_user+0x85/0x90 ... Call Trace: <IRQ> ipv6_renew_option+0xb2/0xf0 ipv6_renew_options+0x26a/0x340 ipv6_renew_options_kern+0x2c/0x40 calipso_req_setattr+0x72/0xe0 netlbl_req_setattr+0x126/0x1b0 selinux_netlbl_inet_conn_request+0x80/0x100 selinux_inet_conn_request+0x6d/0xb0 security_inet_conn_request+0x32/0x50 tcp_conn_request+0x35f/0xe00 ? __lock_acquire+0x250/0x16c0 ? selinux_socket_sock_rcv_skb+0x1ae/0x210 ? tcp_rcv_state_process+0x289/0x106b tcp_rcv_state_process+0x289/0x106b ? tcp_v6_do_rcv+0x1a7/0x3c0 tcp_v6_do_rcv+0x1a7/0x3c0 tcp_v6_rcv+0xc82/0xcf0 ip6_input_finish+0x10d/0x690 ip6_input+0x45/0x1e0 ? ip6_rcv_finish+0x1d0/0x1d0 ipv6_rcv+0x32b/0x880 ? ip6_make_skb+0x1e0/0x1e0 __netif_receive_skb_core+0x6f2/0xdf0 ? process_backlog+0x85/0x250 ? process_backlog+0x85/0x250 ? process_backlog+0xec/0x250 process_backlog+0xec/0x250 net_rx_action+0x153/0x480 __do_softirq+0xd9/0x4f7 do_softirq_own_stack+0x2a/0x40 </IRQ> ... While not present in the backtrace, ipv6_renew_option() ends up calling access_ok() via the following chain: access_ok() _copy_from_user() copy_from_user() ipv6_renew_option() The fix presented in this patch is to perform the userspace copy earlier in the call chain such that it is only called when the option data is actually coming from userspace; that place is do_ipv6_setsockopt(). Not only does this solve the problem seen in the backtrace above, it also allows us to simplify the code quite a bit by removing ipv6_renew_options_kern() completely. We also take this opportunity to cleanup ipv6_renew_options()/ipv6_renew_option() a small amount as well. This patch is heavily based on a rough patch by Al Viro. I've taken his original patch, converted a kmemdup() call in do_ipv6_setsockopt() to a memdup_user() call, made better use of the e_inval jump target in the same function, and cleaned up the use ipv6_renew_option() by ipv6_renew_options(). CC: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05cxgb4: Fix the condition to check if the card is T5Ganesh Goudar
Use 'chip_ver' rather than 'chip' to check if the card is T5. Fixes: e8d452923ae6 ("cxgb4: clean up init_one") Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05qed: off by one in qed_parse_mcp_trace_buf()Dan Carpenter
If format_idx == s_mcp_trace_meta.formats_num then we read one element beyond the end of the s_mcp_trace_meta.formats[] array. Fixes: 50bc60cb155c ("qed*: Utilize FW 8.33.11.0") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: ethernet: sun: remove redundant variables adv and lpa and mii_readsColin Ian King
Variables adv and lpa are being assigned but are never used hence they are redundant and can be removed. Also remove the unncessary mii_reads too. Cleans up clang warnings: warning: variable 'lpa' set but not used [-Wunused-but-set-variable] warning: variable 'adv' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05Merge branch 'net-ethernet-Miscellaneous-Kconfig-and-Makefile-cleanups'David S. Miller
Geert Uytterhoeven says: ==================== net: ethernet: Miscellaneous Kconfig and Makefile cleanups This patch series contains a few Kconfig and Makefile cleanups w.r.t. Ethernet vendors. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: ethernet: sfc: Make subdir logic consistent with other vendorsGeert Uytterhoeven
Both SFC and SFC_FALCON depend on NET_VENDOR_SOLARFLARE, hence use the latter to decide whether to descend into the sfc subdirectory. Move the rule to descend into sfc/falcon to the sfc subdirectory. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: ethernet: Add missing VENDOR to Cadence and Packet Engines symbolsGeert Uytterhoeven
The vendor guard Kconfig symbols for Cadence and Packet Engines use a "NET_" prefix, while all other vendor guards use a "NET_VENDOR_" prefix. Hence make them consistent with the rest, and add the missing trailing "S" for Packet Engines while at it. As these options don't directly affect the kernel build, and default to "y", this change has no impact on kernels built with existing (def)configs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: ethernet: Make NET_VENDOR_AURORA default to yesGeert Uytterhoeven
Enabling NET_VENDOR_* Kconfig options does not directly affect the kernel build. Hence NET_VENDOR_AURORA should default to yes, like other NET_VENDOR_* options. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05Merge branches 'acpi-tables' and 'acpica'Rafael J. Wysocki
Merge ACPICA regression fix and a fix for the recently added PPTT support. * acpi-tables: ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set * acpica: ACPICA: Drop leading newlines from error messages
2018-07-05qlogic: netxen: remove various redundant variablesColin Ian King
Variables consumer, cmd_desc, end_cnt and no_of_desc are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'consumer' set but not used [-Wunused-but-set-variable] warning: variable 'cmd_desc' set but not used [-Wunused-but-set-variable] warning: variable 'end_cnt' set but not used [-Wunused-but-set-variable] warning: variable 'no_of_desc' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05Merge branch 'devlink-Add-configuration-parameters-support'David S. Miller
Moshe Shemesh says: ==================== Add configuration parameters support Add configuration parameters setting through devlink. Each device registers supported configuration parameters table. Each parameter can be either generic or driver specific. The user can retrieve data on these parameters by "devlink param show" command and can set new value to a parameter by "devlink param set" command. The parameters can be set in different configuration modes: runtime - set while driver is running, no reset required. driverinit - applied while driver initializes, requires restart driver by devlink reload command. permanent - written to device's non-volatile memory, hard reset required. The patches at the end of the patchset introduce few params that are using the introduced infrastructure on mlx4 and bnxt. Command examples and output: pci/0000:81:00.0: name internal_error_reset type generic values: cmode runtime value true cmode driverinit value true name max_macs type generic values: cmode driverinit value 128 name enable_64b_cqe_eqe type driver-specific values: cmode driverinit value true name enable_4k_uar type driver-specific values: cmode driverinit value false pci/0000:81:00.0: name internal_error_reset type generic values: cmode runtime value false cmode driverinit value true ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05bnxt_en: Add bnxt_en initial params table and register it.Vasundhara Volam
Create initial devlink parameters table for bnxt_en. Table consists of a permanent generic parameter. enable_sriov - Enables Single-Root Input/Output Virtualization(SR-IOV) characteristic of the device. Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05devlink: Add enable_sriov boolean generic parameterVasundhara Volam
enable_sriov - Enables Single-Root Input/Output Virtualization(SR-IOV) characteristic of the device. Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05mlx4: Add support for devlink reload and load driverinit valuesMoshe Shemesh
Add mlx4_devlink_reload() to support devlink reload operation. Add mlx4_devlink_param_load_driverinit_values() to load values which were set using driverinit configuration mode. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05mlx4: Add mlx4 initial parameters table and register itMoshe Shemesh
Create initial parameters table for mlx4. The table consists of two generic parameters and two driver-specific parameters. Generic: internal_err_reset - Enable reset device on internal errors. This parameter can be configured on mlx4 either on runtime or during driver initialization. max_macs - Max number of MACs per ETH port. For mlx4 this parameter value range is between 1 and 128. This parameter can be configured on mlx4 only during driver initialization. Driver specific: enable_64b_cqe_eqe - Enable 64 byte CQEs/EQEs when the FW supports it. This parameter can be configured on mlx4 only during driver initialization. enable_4k_uar - Enable using 4K UAR. This parameter can be configured on mlx4 only during driver initialization. Register the parameters table on mlx4_init_one() and unregister on mlx4_remove_one(). Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05devlink: Add generic parameters internal_err_reset and max_macsMoshe Shemesh
Add 2 first generic parameters to devlink configuration parameters set: internal_err_reset - When set enables reset device on internal errors. max_macs - max number of MACs per ETH port. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05devlink: Add devlink notifications support for paramsMoshe Shemesh
Add devlink_param_notify() function to support devlink param notifications. Add notification call to devlink param set, register and unregister functions. Add devlink_param_value_changed() function to enable the driver notify devlink on value change. Driver should use this function after value was changed on any configuration mode part to driverinit. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05devlink: Add support for get/set driverinit valueMoshe Shemesh
"driverinit" configuration mode value is held by devlink to enable the driver query the value after reload. Two additional functions added to help the driver get/set the value from/to devlink: devlink_param_driverinit_value_set() and devlink_param_driverinit_value_get(). Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05devlink: Add param set commandMoshe Shemesh
Add param set command to set value for a parameter. Value can be set to any of the supported configuration modes. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05devlink: Add param get commandMoshe Shemesh
Add param get command which gets data per parameter. Option to dump the parameters data per device. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05devlink: Add devlink_param register and unregisterMoshe Shemesh
Define configuration parameters data structure. Add functions to register and unregister the driver supported configuration parameters table. For each parameter registered, the driver should fill all the parameter's fields. In case the only supported configuration mode is "driverinit" the parameter's get()/set() functions are not required and should be set to NULL, for any other configuration mode, these functions are required and should be set by the driver. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05Merge branch 'pm-pci'Rafael J. Wysocki
Merge a PCI power management regression fix. * pm-pci: PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM
2018-07-05net/hamradio/6pack: remove redundant variable channelColin Ian King
Variable channel is being assigned but is never used hence it is redundant and can be removed. Cleans up two clang warnings: warning: variable 'channel' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05fjes: use currently unused variable my_epid and max_epidColin Ian King
Variables my_epid and max_epid are currently assigned and not being used - however, I suspect they were intended to be used in the for-loops to reduce the dereferencing of hw. Replace hw->my_epid and hw->max_epid with these variables. Cleans up clang warnings: warning: variable 'my_epid' set but not used [-Wunused-but-set-variable] variable 'max_epid' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: tehuti: remove redundant pointer skbColin Ian King
Pointer skb is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'skb' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: socionext: remove redundant pointer ndevColin Ian King
Pointer ndev is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'ndev' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: aquantia: Make some functions staticWei Yongjun
Fixes the following sparse warnings: drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:525:5: warning: symbol 'hw_atl_utils_mpi_set_speed' was not declared. Should it be static? drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:536:5: warning: symbol 'hw_atl_utils_mpi_set_state' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: dsa: vsc73xx: Make some functions staticWei Yongjun
Fixes the following sparse warnings: drivers/net/dsa/vitesse-vsc73xx.c:1054:6: warning: symbol 'vsc73xx_get_strings' was not declared. Should it be static? drivers/net/dsa/vitesse-vsc73xx.c:1113:5: warning: symbol 'vsc73xx_get_sset_count' was not declared. Should it be static? drivers/net/dsa/vitesse-vsc73xx.c:1122:6: warning: symbol 'vsc73xx_get_ethtool_stats' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: dsa: fix spelling mistake "waitting" -> "waiting"Colin Ian King
Trivial fix to spelling mistake in dev_err error message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: limit each hash list length to MAX_GRO_SKBSLi RongQing
After commit 07d78363dcff ("net: Convert NAPI gro list into a small hash table.")' there is 8 hash buckets, which allows more flows to be held for merging. but MAX_GRO_SKBS, the total held skb for merging, is 8 skb still, limit the hash table performance. keep MAX_GRO_SKBS as 8 skb, but limit each hash list length to 8 skb, not the total 8 skb Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05netfilter: x_tables: set module owner for icmp(6) matchesFlorian Westphal
nft_compat relies on xt_request_find_match to increment refcount of the module that provides the match/target. The (builtin) icmp matches did't set the module owner so it was possible to rmmod ip(6)tables while icmp extensions were still in use. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-05ieee802154: 6lowpan: set IFLA_LINKLubomir Rintel
Otherwise NetworkManager (and iproute alike) is not able to identify the parent IEEE 802.15.4 interface of a 6LoWPAN link. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-07-05ieee802154: mcr20a: add missing includesArnd Bergmann
Without CONFIG_GPIOLIB, some headers are not included implicitly, leading to a build failure: drivers/net/ieee802154/mcr20a.c: In function 'mcr20a_probe': drivers/net/ieee802154/mcr20a.c:1347:13: error: implicit declaration of function 'irq_get_trigger_type'; did you mean 'irq_get_irqchip_state'? [-Werror=implicit-function-declaration] This includes gpio/consumer.h and irq.h directly rather through the gpiolib header. Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Xue Liu <liuxuenetmail@gmail.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-07-05nds32: fix build error "relocation truncated to fit: R_NDS32_25_PCREL_RELA" whenGreentime Hu
make allyesconfig It will cause a linking error because the jump assembly code were using j, however it may be not enough to jump to the destination. We have to change it with pseudo instruction b. In that way, assembler will generate a set of safe assembly codes to make sure the destination is able to jump. Toolchain: https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/x86_64-gcc-8.1.0-nolibc-nds32le-linux.tar.gz Command: PATH=/NOBACKUP/atcsqa06/greentime/os/toolchain-kernel.org/gcc-8.1.0-nolibc/nds32le-linux/bin:$PATH ARCH=nds32 CROSS_COMPILE=nds32le-linux- make allyesconfig PATH=/NOBACKUP/atcsqa06/greentime/os/toolchain-kernel.org/gcc-8.1.0-nolibc/nds32le-linux/bin:$PATH ARCH=nds32 CROSS_COMPILE=nds32le-linux- make -j8 MODPOST vmlinux.o WARNING: EXPORT symbol "copy_page" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "clear_page" [vmlinux] version generation failed, symbol will not be versioned. nds32le-linux-ld: kernel/futex.o:(.fixup+0x4): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xaa): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xb0): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xb6): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xbc): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xc4): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' Makefile:1010: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-07-05samples/bpf: add .gitignore fileTaeung Song
For untracked executables of samples/bpf, add this. Untracked files: (use "git add <file>..." to include in what will be committed) samples/bpf/cpustat samples/bpf/fds_example samples/bpf/lathist samples/bpf/load_sock_ops ... Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05samples/bpf: Check the error of write() and read()Taeung Song
test_task_rename() and test_urandom_read() can be failed during write() and read(), So check the result of them. Reviewed-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05samples/bpf: Check the result of system()Taeung Song
To avoid the below build warning message, use new generate_load() checking the return value. ignoring return value of ‘system’, declared with attribute warn_unused_result And it also refactors the duplicate code of both test_perf_event_all_cpu() and test_perf_event_task() Cc: Teng Qin <qinteng@fb.com> Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05samples/bpf: add missing <linux/if_vlan.h>Taeung Song
This fixes build error regarding redefinition: CLANG-bpf samples/bpf/parse_varlen.o samples/bpf/parse_varlen.c:111:8: error: redefinition of 'vlan_hdr' struct vlan_hdr { ^ ./include/linux/if_vlan.h:38:8: note: previous definition is here So remove duplicate 'struct vlan_hdr' in sample code and include if_vlan.h Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05drm/i915/gvt: update vreg on inhibit context lri commandHang Yuan
Commit cd7e 61b9"init mmio by lri command in vgpu inhibit context" initializes registers saved/restored in context with its vreg value through lri command in ring buffer. It relies on vreg got updated on every guest access. There is a case found that Linux guest uses lri command in inhibit-ctx to update the register. This patch adds vreg update on this case. v2: move mmio_attribute functions to gvt.h (Zhenyu) v3: use mask_mmio_write in vreg update v4: refine codes and add more comments (Zhenyu) Fixes: cd7e61b9("drm/i915/gvt: init mmio by lri command in vgpu inhibit context") Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com> Signed-off-by: Weinan Li <weinan.z.li@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-07-05drm/udl: fix display corruption of the last lineMikulas Patocka
The displaylink hardware has such a peculiarity that it doesn't render a command until next command is received. This produces occasional corruption, such as when setting 22x11 font on the console, only the first line of the cursor will be blinking if the cursor is located at some specific columns. When we end up with a repeating pixel, the driver has a bug that it leaves one uninitialized byte after the command (and this byte is enough to flush the command and render it - thus it fixes the screen corruption), however whe we end up with a non-repeating pixel, there is no byte appended and this results in temporary screen corruption. This patch fixes the screen corruption by always appending a byte 0xAF at the end of URB. It also removes the uninitialized byte. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-07-05usb: chipidea: Always build ULPI codeFabio Estevam
Commit 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51") causes a kernel hang on imx51 systems that use the ULPI interface and do not select the CONFIG_USB_CHIPIDEA_ULPI option. In order to avoid such potential misuse, let's always build the chipidea ULPI code into the final ci_hdrc object. Tested on a imx51-babbage board. Fixes: 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51") Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2018-07-05qed: Fix reading stale configuration informationDenis Bolotin
Configuration information read at driver load can become stale after it is updated. Mark information as not valid and re-populate when this happens. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05r8169: fix runtime suspendHeiner Kallweit
When runtime-suspending we configure WoL w/o touching saved_wolopts. If saved_wolopts == 0 we would power down the PHY in this case what's wrong. Therefore we have to check the actual chip WoL settings here. Fixes: 433f9d0ddcc6 ("r8169: improve saved_wolopts handling") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: ipv4: fix drop handling in ip_list_rcv() and ip_list_rcv_finish()Edward Cree
Since callees (ip_rcv_core() and ip_rcv_finish_core()) might free or steal the skb, we can't use the list_cut_before() method; we can't even do a list_del(&skb->list) in the drop case, because skb might have already been freed and reused. So instead, take each skb off the source list before processing, and add it to the sublist afterwards if it wasn't freed or stolen. Fixes: 5fa12739a53d net: ipv4: listify ip_rcv_finish Fixes: 17266ee93984 net: ipv4: listified version of ip_rcv Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05cxgb4: Add support to read actual provisioned resourcesCasey Leedom
In highly constrained resources environments (like the 124VF T5 and 248VF T6 configurations), PF4 may not have very many resources at all and we need to adapt to whatever we've been allocated, this patch adds support to get the provisioned resources. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: phy: fix flag masking in __set_phy_supportedHeiner Kallweit
Currently also the pause flags are removed from phydev->supported because they're not included in PHY_DEFAULT_FEATURES. I don't think this is intended, especially when considering that this function can be called via phy_set_max_speed() anywhere in a driver. Change the masking to mask out only the values we're going to change. In addition remove the misleading comment, job of this small function is just to adjust the supported and advertised speeds. Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04arm64: add endianness option to LDFLAGS instead of LDMasahiro Yamada
With the recent syntax extension, Kconfig is now able to evaluate the compiler / toolchain capability. However, accumulating flags to 'LD' is not compatible with the way it works; 'LD' must be passed to Kconfig to call $(ld-option,...) from Kconfig files. If you tweak 'LD' in arch Makefile depending on CONFIG_CPU_BIG_ENDIAN, this would end up with circular dependency between Makefile and Kconfig. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-07-04RISC-V: Fix the rv32i kernel buildPalmer Dabbelt
These patches for building 32-bit RISC-V kernel. - Fix the compile errors and warnings on RV32I. - Fix some incompatible problem on RV32I. - Add format.h for compatible of print format. The fixed width integer types format for Elf_Addr will move to generic header by another patch. For now, there are some warning about unexpected argument of type on RV32I. Change in v1: - Fix some error in v1 - Remove implementation of fixed width integer types format for Elf_Addr.
2018-07-04RISC-V: Fix PTRACE_SETREGSET bug.Jim Wilson
In riscv_gpr_set, pass regs instead of &regs to user_regset_copyin to fix gdb segfault. Signed-off-by: Jim Wilson <jimw@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: Don't include irq-riscv-intc.hPalmer Dabbelt
This file has never existed in the upstream kernel, but it's guarded by an #ifdef that's also never existed in the upstream kernel. As a part of our interrupt controller refactoring this header is no longer necessary, but this reference managed to sneak in anyway. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
generated by cgit (git 2.34.1) at 2025-09-24 09:11:23 +0000