| Age | Commit message (Collapse) | Author |
|---|
|
Both qeth and zfcp have fully moved to the polling-driven flow for
Input Queues with commit 0a6e634535f1 ("s390/qdio: extend polling
support to multiple queues") and commit 0b524abc2dd1 ("scsi: zfcp: Lift
Input Queue tasklet from qdio").
So remove the tasklet code for Input Queues, streamline the IRQ handlers
and push the tasklet struct into struct qdio_output_q.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull devfreq changes for v5.12 from Chanwoo Choi:
"- Correct the spelling of comment in devfreq core
- Replace devfreq->dev.parent with dev in devfreq core
- Remove unneeded simicolon in rk3399_dmc.c"
* tag 'devfreq-next-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: rk3399_dmc: Remove unneeded semicolon
PM / devfreq: Replace devfreq->dev.parent as dev in devfreq_add_device
PM / devfreq: Correct spelling in a comment
|
|
Similar to commit 28187dc8ebd9 ("ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN
depends on !LD_IS_LLD"), ld.lld prior to 13.0.0 does not properly
support aarch64 big endian, leading to the following build error when
CONFIG_CPU_BIG_ENDIAN is selected:
ld.lld: error: unknown emulation: aarch64linuxb
This has been resolved in LLVM 13. To avoid errors like this, only allow
CONFIG_CPU_BIG_ENDIAN to be selected if using ld.bfd or ld.lld 13.0.0
and newer.
While we are here, the indentation of this symbol used spaces since its
introduction in commit a872013d6d03 ("arm64: kconfig: allow
CPU_BIG_ENDIAN to be selected"). Change it to tabs to be consistent with
kernel coding style.
Link: https://github.com/ClangBuiltLinux/linux/issues/380
Link: https://github.com/ClangBuiltLinux/linux/issues/1288
Link: https://github.com/llvm/llvm-project/commit/7605a9a009b5fa3bdac07e3131c8d82f6d08feb7
Link: https://github.com/llvm/llvm-project/commit/eea34aae2e74e9b6fbdd5b95f479bc7f397bf387
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210209005719.803608-1-nathan@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
With the introduction of the RDACM21 camera module support in commit
a59f853b3b4b ("media: i2c: Add driver for RDACM21 camera module") the
symbols defined by the max9271 library were exported twice if multiple
users of the library were compiled in at the same time.
In example:
WARNING: modpost: drivers/media/i2c/rdacm21-camera_module:
'max9271_set_serial_link' exported twice. Previous export was in
drivers/media/i2c/rdacm20-camera_module.ko
Fix this by making the max9271 file a module and have the driver
using its functions select it.
Fixes: a59f853b3b4b ("media: i2c: Add driver for RDACM21 camera module")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix this compiler warning:
drivers/media/i2c/imx334.c: In function 'imx334_parse_hw_config':
include/linux/dev_printk.h:112:2: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized]
112 | _dev_err(dev, dev_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~~
drivers/media/i2c/imx334.c:783:6: note: 'ret' was declared here
783 | int ret;
| ^~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The KTD253 backlight might already be on when the driver
is probed: then we don't really know what the current
ratio is and all light intensity settings will be off
relative to what it was at boot.
To fix this, bring up the backlight OFF then move it to
the default backlight from there so we know the state.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
In order to be able to disable Pointer Authentication at runtime,
whether it is for testing purposes, or to work around HW issues,
let's add support for overriding the ID_AA64ISAR1_EL1.{GPI,GPA,API,APA}
fields.
This is further mapped on the arm64.nopauth command-line alias.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: David Brazdil <dbrazdil@google.com>
Tested-by: Srinivas Ramana <sramana@codeaurora.org>
Link: https://lore.kernel.org/r/20210208095732.3267263-23-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Defer enabling pointer authentication on boot core until
after its required to be enabled by cpufeature framework.
This will help in controlling the feature dynamically
with a boot parameter.
Signed-off-by: Ajay Patil <pajay@qti.qualcomm.com>
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1610152163-16554-2-git-send-email-sramana@codeaurora.org
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: David Brazdil <dbrazdil@google.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-22-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In order to be able to disable BTI at runtime, whether it is
for testing purposes, or to work around HW issues, let's add
support for overriding the ID_AA64PFR1_EL1.BTI field.
This is further mapped on the arm64.nobti command-line alias.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: David Brazdil <dbrazdil@google.com>
Tested-by: Srinivas Ramana <sramana@codeaurora.org>
Link: https://lore.kernel.org/r/20210208095732.3267263-21-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Given that the early cpufeature infrastructure has borrowed quite
a lot of code from the kaslr implementation, let's reimplement
the matching of the "nokaslr" option with it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: David Brazdil <dbrazdil@google.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-20-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For completeness, let's document the HVC_VHE_RESTART stub.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: David Brazdil <dbrazdil@google.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-19-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Admitedly, passing id_aa64mmfr1.vh=0 on the command-line isn't
that easy to understand, and it is likely that users would much
prefer write "kvm-arm.mode=nvhe", or "...=protected".
So here you go. This has the added advantage that we can now
always honor the "kvm-arm.mode=protected" option, even when
booting on a VHE system.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: David Brazdil <dbrazdil@google.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-18-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In order to map the override of idregs to options that a user
can easily understand, let's introduce yet another option
array, which maps an option to the corresponding idreg options.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: David Brazdil <dbrazdil@google.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-17-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Finally we can check whether VHE is disabled on the command line,
and not enable it if that's the user's wish.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: David Brazdil <dbrazdil@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-16-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As we want to be able to disable VHE at runtime, let's match
"id_aa64mmfr1.vh=" from the command line as an override.
This doesn't have much effect yet as our boot code doesn't look
at the cpufeature, but only at the HW registers.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: David Brazdil <dbrazdil@google.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-15-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In order to be able to override CPU features at boot time,
let's add a command line parser that matches options of the
form "cpureg.feature=value", and store the corresponding
value into the override val/mask pair.
No features are currently defined, so no expected change in
functionality.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: David Brazdil <dbrazdil@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-14-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As we want to parse more options very early in the kernel lifetime,
let's always map the FDT early. This is achieved by moving that
code out of kaslr_early_init().
No functional change expected.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: David Brazdil <dbrazdil@google.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-13-maz@kernel.org
[will: Ensue KASAN is enabled before running C code]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since commit ff9ea323816d ("block, bdi: an active gendisk always has a
request_queue associated with it") the request_queue pointer returned
from bdev_get_queue() shall never be NULL.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Fix dm_table_supports_zoned_model() and invert logic of both
iterate_devices_callout_fn so that all devices' zoned capabilities are
properly checked.
Add one more parameter to dm_table_any_dev_attr(), which is actually
used as the @data parameter of iterate_devices_callout_fn, so that
dm_table_matches_zone_sectors() can be replaced by
dm_table_any_dev_attr().
Fixes: dd88d313bef02 ("dm table: add zoned block devices validation")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
__read_sysreg_by_encoding() is used by a bunch of cpufeature helpers,
which should take the feature override into account. Let's do that.
For a good measure (and because we are likely to need to further
down the line), make this helper available to the rest of the
non-modular kernel.
Code that needs to know the *real* features of a CPU can still
use read_sysreg_s(), and find the bare, ugly truth.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: David Brazdil <dbrazdil@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-12-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add a facility to globally override a feature, no matter what
the HW says. Yes, this sounds dangerous, but we do respect the
"safe" value for a given feature. This doesn't mean the user
doesn't need to know what they are doing.
Nothing uses this yet, so we are pretty safe. For now.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: David Brazdil <dbrazdil@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-11-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We can now move the initial SCTLR_EL1 setup to be used for both
EL1 and EL2 setup.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: David Brazdil <dbrazdil@google.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-10-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As init_el2_state is now nVHE only, let's simplify it and drop
the VHE setup.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: David Brazdil <dbrazdil@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-9-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There isn't much that a VHE kernel needs on top of whatever has
been done for nVHE, so let's move the little we need to the
VHE stub (the SPE setup), and drop the init_el2_state macro.
No expected functional change.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: David Brazdil <dbrazdil@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-8-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When running VHE, we set MDSCR_EL2.TPMS very early on to force
the trapping of EL1 SPE accesses to EL2.
However:
- we are running with HCR_EL2.{E2H,TGE}={1,1}, meaning that there
is no EL1 to trap from
- before entering a guest, we call kvm_arm_setup_debug(), which
sets MDCR_EL2_TPMS in the per-vcpu shadow mdscr_el2, which gets
applied on entry by __activate_traps_common().
The early setting of MDSCR_EL2.TPMS is therefore useless and can
be dropped.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210208095732.3267263-7-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As we are aiming to be able to control whether we enable VHE or
not, let's always drop down to EL1 first, and only then upgrade
to VHE if at all possible.
This means that if the kernel is booted at EL2, we always start
with a nVHE init, drop to EL1 to initialise the the kernel, and
only then upgrade the kernel EL to EL2 if possible (the process
is obviously shortened for secondary CPUs).
The resume path is handled similarly to a secondary CPU boot.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: David Brazdil <dbrazdil@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210208095732.3267263-6-maz@kernel.org
[will: Avoid calling switch_to_vhe twice on kaslr path]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fix dm_table_supports_dax() and invert logic of both
iterate_devices_callout_fn so that all devices' DAX capabilities are
properly checked.
Fixes: 545ed20e6df6 ("dm: add infrastructure for DAX support")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
According to the definition of dm_iterate_devices_fn:
* This function must iterate through each section of device used by the
* target until it encounters a non-zero return code, which it then returns.
* Returns zero if no callout returned non-zero.
For some target type (e.g. dm-stripe), one call of iterate_devices() may
iterate multiple underlying devices internally, in which case a non-zero
return code returned by iterate_devices_callout_fn will stop the iteration
in advance. No iterate_devices_callout_fn should return non-zero unless
device iteration should stop.
Rename dm_table_requires_stable_pages() to dm_table_any_dev_attr() and
elevate it for reuse to stop iterating (and return non-zero) on the
first device that causes iterate_devices_callout_fn to return non-zero.
Use dm_table_any_dev_attr() to properly iterate through devices.
Rename device_is_nonrot() to device_is_rotational() and invert logic
accordingly to fix improper disposition.
Fixes: c3c4555edd10 ("dm table: clear add_random unless all devices have it set")
Fixes: 4693c9668fdc ("dm table: propagate non rotational flag")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Documentation/virt/kvm/api.rst:4927: WARNING: Title underline too short.
4.130 KVM_XEN_VCPU_GET_ATTR
--------------------------
Fixes: e1f68169a4f8 ("KVM: Add documentation for Xen hypercall and shared_info updates")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In order to support Xen SHUTDOWN_soft_reset (for guest kexec, etc.) the
VMM needs to be able to tear everything down and return the Xen features
to a clean slate.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20210208232326.1830370-1-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When retpolines are enabled they have high overhead in the inner loop
inside kvm_handle_hva_range() that iterates over the provided memory area.
Let's mark this function and its TDP MMU equivalent __always_inline so
compiler will be able to change the call to the actual handler function
inside each of them into a direct one.
This significantly improves performance on the unmap test on the existing
kernel memslot code (tested on a Xeon 8167M machine):
30 slots in use:
Test Before After Improvement
Unmap 0.0353s 0.0334s 5%
Unmap 2M 0.00104s 0.000407s 61%
509 slots in use:
Test Before After Improvement
Unmap 0.0742s 0.0740s None
Unmap 2M 0.00221s 0.00159s 28%
Looks like having an indirect call in these functions (and, so, a
retpoline) might have interfered with unrolling of the whole loop in the
CPU.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <732d3fe9eb68aa08402a638ab0309199fa89ae56.1612810129.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
hv_vcpu_to_vcpu() helper is only used by other helpers and
is not very complex, we can drop it without much regret.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-16-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Hyper-V context is only needed for guests which use Hyper-V emulation in
KVM (e.g. Windows/Hyper-V guests) so we don't actually need to allocate
it in kvm_arch_vcpu_create(), we can postpone the action until Hyper-V
specific MSRs are accessed or SynIC is enabled.
Once allocated, let's keep the context alive for the lifetime of the vCPU
as an attempt to free it would require additional synchronization with
other vCPUs and normally it is not supposed to happen.
Note, Hyper-V style hypercall enablement is done by writing to
HV_X64_MSR_GUEST_OS_ID so we don't need to worry about allocating Hyper-V
context from kvm_hv_hypercall().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-15-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Hyper-V emulation is enabled in KVM unconditionally. This is bad at least
from security standpoint as it is an extra attack surface. Ideally, there
should be a per-VM capability explicitly enabled by VMM but currently it
is not the case and we can't mandate one without breaking backwards
compatibility. We can, however, check guest visible CPUIDs and only enable
Hyper-V emulation when "Hv#1" interface was exposed in
HYPERV_CPUID_INTERFACE.
Note, VMMs are free to act in any sequence they like, e.g. they can try
to set MSRs first and CPUIDs later so we still need to allow the host
to read/write Hyper-V specific MSRs unconditionally.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-14-vkuznets@redhat.com>
[Add selftest vcpu_set_hv_cpuid API to avoid breaking xen_vmcall_test. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We need to use "%#" PRIx64 for u64 values, not "%lx". In arm64's and
s390x cases the compiler doesn't complain, but lets fix this in case
this code gets copied to a 32-bit arch, like with powerpc 32-bit that
got fixed in the previous patch.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hewenliang <hewenliang4@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Hyper-V context is only needed for guests which use Hyper-V emulation in
KVM (e.g. Windows/Hyper-V guests). 'struct kvm_vcpu_hv' is, however, quite
big, it accounts for more than 1/4 of the total 'struct kvm_vcpu_arch'
which is also quite big already. This all looks like a waste.
Allocate 'struct kvm_vcpu_hv' dynamically. This patch does not bring any
(intentional) functional change as we still allocate the context
unconditionally but it paves the way to doing that only when needed.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-13-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently, Hyper-V context is part of 'struct kvm_vcpu_arch' and is always
available. As a preparation to allocating it dynamically, check that it is
not NULL at call sites which can normally proceed without it i.e. the
behavior is identical to the situation when Hyper-V emulation is not being
used by the guest.
When Hyper-V context for a particular vCPU is not allocated, we may still
need to get 'vp_index' from there. E.g. in a hypothetical situation when
Hyper-V emulation was enabled on one CPU and wasn't on another, Hyper-V
style send-IPI hypercall may still be used. Luckily, vp_index is always
initialized to kvm_vcpu_get_idx() and can only be changed when Hyper-V
context is present. Introduce kvm_hv_get_vpindex() helper for
simplification.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-12-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_vcpu_hv'
As a preparation to allocating Hyper-V context dynamically, make it clear
who's the user of the said context.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-11-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
'current_vcpu' variable in KVM is a per-cpu pointer to the currently
scheduled vcpu. kvm_hv_flush_tlb()/kvm_hv_send_ipi() functions used
to have local 'vcpu' variable to iterate over vCPUs but it's gone
now and there's no need to use anything but the standard 'vcpu' as
an argument.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-10-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Spelling '&kvm->arch.hyperv' correctly is hard. Also, this makes the code
more consistent with vmx/svm where to_kvm_vmx()/to_kvm_svm() are already
being used.
Opportunistically change kvm_hv_msr_{get,set}_crash_{data,ctl}() and
kvm_hv_msr_set_crash_data() to take 'kvm' instead of 'vcpu' as these
MSRs are partition wide.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vcpu_to_hv_syndbg()'s argument is always 'vcpu' so there's no need to have
an additional prefix. Also, this makes the code more consistent with
vmx/svm where to_vmx()/to_svm() are being used.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vcpu_to_stimers()'s argument is almost always 'vcpu' so there's no need to
have an additional prefix. Also, this makes the naming more consistent with
to_hv_vcpu()/to_hv_synic().
Rename stimer_to_vcpu() to hv_stimer_to_vcpu() for consitency.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vcpu_to_synic()'s argument is almost always 'vcpu' so there's no need to
have an additional prefix. Also, as this is used outside of hyper-v
emulation code, add '_hv_' part to make it clear what this s. This makes
the naming more consistent with to_hv_vcpu().
Rename synic_to_vcpu() to hv_synic_to_vcpu() for consistency.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vcpu_to_hv_vcpu()'s argument is almost always 'vcpu' so there's
no need to have an additional prefix. Also, this makes the code
more consistent with vmx/svm where to_vmx()/to_svm() are being
used.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_hv_vapic_assist_page_enabled() seems to be unused since its
introduction in commit 10388a07164c1 ("KVM: Add HYPER-V apic access MSRs"),
drop it.
Reported-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Generally, when Hyper-V emulation is enabled, VMM is supposed to set
Hyper-V CPUID identifications so the guest knows that Hyper-V features
are available. evmcs_test doesn't currently do that but so far Hyper-V
emulation in KVM was enabled unconditionally. As we are about to change
that, proper Hyper-V CPUID identification should be set in selftests as
well.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_get_supported_hv_cpuid() may come handy in all Hyper-V related tests.
Split it off hyperv_cpuid test, create system-wide and vcpu versions.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210126134816.1880136-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Current KVM_USER_MEM_SLOTS limits are arch specific (512 on Power, 509 on x86,
32 on s390, 16 on MIPS) but they don't really need to be. Memory slots are
allocated dynamically in KVM when added so the only real limitation is
'id_to_index' array which is 'short'. We don't have any other
KVM_MEM_SLOTS_NUM/KVM_USER_MEM_SLOTS-sized statically defined structures.
Low KVM_USER_MEM_SLOTS can be a limiting factor for some configurations.
In particular, when QEMU tries to start a Windows guest with Hyper-V SynIC
enabled and e.g. 256 vCPUs the limit is hit as SynIC requires two pages per
vCPU and the guest is free to pick any GFN for each of them, this fragments
memslots as QEMU wants to have a separate memslot for each of these pages
(which are supposed to act as 'overlay' pages).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210127175731.2020089-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
With the updated maximum number of user memslots (32)
set_memory_region_test sometimes takes longer than the default 45 seconds
to finish. Raise the value to an arbitrary 120 seconds.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210127175731.2020089-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Push the injection of #GP up to the callers, so that they can just use
kvm_complete_insn_gp. __kvm_set_dr is pretty much what the callers can use
together with kvm_complete_insn_gp, so rename it to kvm_set_dr and drop
the old kvm_set_dr wrapper.
This also allows nested VMX code, which really wanted to use __kvm_set_dr,
to use the right function.
While at it, remove the kvm_require_dr() check from the SVM interception.
The APM states:
All normal exception checks take precedence over the SVM intercepts.
which includes the CR4.DE=1 #UD.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
